summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/aic7xxx/aic7xxx.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/aic7xxx/aic7xxx.h')
-rw-r--r--drivers/scsi/aic7xxx/aic7xxx.h1352
1 files changed, 1352 insertions, 0 deletions
diff --git a/drivers/scsi/aic7xxx/aic7xxx.h b/drivers/scsi/aic7xxx/aic7xxx.h
new file mode 100644
index 000000000000..8ff16fd8ed49
--- /dev/null
+++ b/drivers/scsi/aic7xxx/aic7xxx.h
@@ -0,0 +1,1352 @@
+/*
+ * Core definitions and data structures shareable across OS platforms.
+ *
+ * Copyright (c) 1994-2001 Justin T. Gibbs.
+ * Copyright (c) 2000-2001 Adaptec Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ * $Id: //depot/aic7xxx/aic7xxx/aic7xxx.h#79 $
+ *
+ * $FreeBSD$
+ */
+
+#ifndef _AIC7XXX_H_
+#define _AIC7XXX_H_
+
+/* Register Definitions */
+#include "aic7xxx_reg.h"
+
+/************************* Forward Declarations *******************************/
+struct ahc_platform_data;
+struct scb_platform_data;
+struct seeprom_descriptor;
+
+/****************************** Useful Macros *********************************/
+#ifndef MAX
+#define MAX(a,b) (((a) > (b)) ? (a) : (b))
+#endif
+
+#ifndef MIN
+#define MIN(a,b) (((a) < (b)) ? (a) : (b))
+#endif
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+#define NUM_ELEMENTS(array) (sizeof(array) / sizeof(*array))
+
+#define ALL_CHANNELS '\0'
+#define ALL_TARGETS_MASK 0xFFFF
+#define INITIATOR_WILDCARD (~0)
+
+#define SCSIID_TARGET(ahc, scsiid) \
+ (((scsiid) & ((((ahc)->features & AHC_TWIN) != 0) ? TWIN_TID : TID)) \
+ >> TID_SHIFT)
+#define SCSIID_OUR_ID(scsiid) \
+ ((scsiid) & OID)
+#define SCSIID_CHANNEL(ahc, scsiid) \
+ ((((ahc)->features & AHC_TWIN) != 0) \
+ ? ((((scsiid) & TWIN_CHNLB) != 0) ? 'B' : 'A') \
+ : 'A')
+#define SCB_IS_SCSIBUS_B(ahc, scb) \
+ (SCSIID_CHANNEL(ahc, (scb)->hscb->scsiid) == 'B')
+#define SCB_GET_OUR_ID(scb) \
+ SCSIID_OUR_ID((scb)->hscb->scsiid)
+#define SCB_GET_TARGET(ahc, scb) \
+ SCSIID_TARGET((ahc), (scb)->hscb->scsiid)
+#define SCB_GET_CHANNEL(ahc, scb) \
+ SCSIID_CHANNEL(ahc, (scb)->hscb->scsiid)
+#define SCB_GET_LUN(scb) \
+ ((scb)->hscb->lun & LID)
+#define SCB_GET_TARGET_OFFSET(ahc, scb) \
+ (SCB_GET_TARGET(ahc, scb) + (SCB_IS_SCSIBUS_B(ahc, scb) ? 8 : 0))
+#define SCB_GET_TARGET_MASK(ahc, scb) \
+ (0x01 << (SCB_GET_TARGET_OFFSET(ahc, scb)))
+#ifdef AHC_DEBUG
+#define SCB_IS_SILENT(scb) \
+ ((ahc_debug & AHC_SHOW_MASKED_ERRORS) == 0 \
+ && (((scb)->flags & SCB_SILENT) != 0))
+#else
+#define SCB_IS_SILENT(scb) \
+ (((scb)->flags & SCB_SILENT) != 0)
+#endif
+#define TCL_TARGET_OFFSET(tcl) \
+ ((((tcl) >> 4) & TID) >> 4)
+#define TCL_LUN(tcl) \
+ (tcl & (AHC_NUM_LUNS - 1))
+#define BUILD_TCL(scsiid, lun) \
+ ((lun) | (((scsiid) & TID) << 4))
+
+#ifndef AHC_TARGET_MODE
+#undef AHC_TMODE_ENABLE
+#define AHC_TMODE_ENABLE 0
+#endif
+
+/**************************** Driver Constants ********************************/
+/*
+ * The maximum number of supported targets.
+ */
+#define AHC_NUM_TARGETS 16
+
+/*
+ * The maximum number of supported luns.
+ * The identify message only supports 64 luns in SPI3.
+ * You can have 2^64 luns when information unit transfers are enabled,
+ * but it is doubtful this driver will ever support IUTs.
+ */
+#define AHC_NUM_LUNS 64
+
+/*
+ * The maximum transfer per S/G segment.
+ */
+#define AHC_MAXTRANSFER_SIZE 0x00ffffff /* limited by 24bit counter */
+
+/*
+ * The maximum amount of SCB storage in hardware on a controller.
+ * This value represents an upper bound. Controllers vary in the number
+ * they actually support.
+ */
+#define AHC_SCB_MAX 255
+
+/*
+ * The maximum number of concurrent transactions supported per driver instance.
+ * Sequencer Control Blocks (SCBs) store per-transaction information. Although
+ * the space for SCBs on the host adapter varies by model, the driver will
+ * page the SCBs between host and controller memory as needed. We are limited
+ * to 253 because:
+ * 1) The 8bit nature of the RISC engine holds us to an 8bit value.
+ * 2) We reserve one value, 255, to represent the invalid element.
+ * 3) Our input queue scheme requires one SCB to always be reserved
+ * in advance of queuing any SCBs. This takes us down to 254.
+ * 4) To handle our output queue correctly on machines that only
+ * support 32bit stores, we must clear the array 4 bytes at a
+ * time. To avoid colliding with a DMA write from the sequencer,
+ * we must be sure that 4 slots are empty when we write to clear
+ * the queue. This reduces us to 253 SCBs: 1 that just completed
+ * and the known three additional empty slots in the queue that
+ * precede it.
+ */
+#define AHC_MAX_QUEUE 253
+
+/*
+ * The maximum amount of SCB storage we allocate in host memory. This
+ * number should reflect the 1 additional SCB we require to handle our
+ * qinfifo mechanism.
+ */
+#define AHC_SCB_MAX_ALLOC (AHC_MAX_QUEUE+1)
+
+/*
+ * Ring Buffer of incoming target commands.
+ * We allocate 256 to simplify the logic in the sequencer
+ * by using the natural wrap point of an 8bit counter.
+ */
+#define AHC_TMODE_CMDS 256
+
+/* Reset line assertion time in us */
+#define AHC_BUSRESET_DELAY 25
+
+/******************* Chip Characteristics/Operating Settings *****************/
+/*
+ * Chip Type
+ * The chip order is from least sophisticated to most sophisticated.
+ */
+typedef enum {
+ AHC_NONE = 0x0000,
+ AHC_CHIPID_MASK = 0x00FF,
+ AHC_AIC7770 = 0x0001,
+ AHC_AIC7850 = 0x0002,
+ AHC_AIC7855 = 0x0003,
+ AHC_AIC7859 = 0x0004,
+ AHC_AIC7860 = 0x0005,
+ AHC_AIC7870 = 0x0006,
+ AHC_AIC7880 = 0x0007,
+ AHC_AIC7895 = 0x0008,
+ AHC_AIC7895C = 0x0009,
+ AHC_AIC7890 = 0x000a,
+ AHC_AIC7896 = 0x000b,
+ AHC_AIC7892 = 0x000c,
+ AHC_AIC7899 = 0x000d,
+ AHC_VL = 0x0100, /* Bus type VL */
+ AHC_EISA = 0x0200, /* Bus type EISA */
+ AHC_PCI = 0x0400, /* Bus type PCI */
+ AHC_BUS_MASK = 0x0F00
+} ahc_chip;
+
+/*
+ * Features available in each chip type.
+ */
+typedef enum {
+ AHC_FENONE = 0x00000,
+ AHC_ULTRA = 0x00001, /* Supports 20MHz Transfers */
+ AHC_ULTRA2 = 0x00002, /* Supports 40MHz Transfers */
+ AHC_WIDE = 0x00004, /* Wide Channel */
+ AHC_TWIN = 0x00008, /* Twin Channel */
+ AHC_MORE_SRAM = 0x00010, /* 80 bytes instead of 64 */
+ AHC_CMD_CHAN = 0x00020, /* Has a Command DMA Channel */
+ AHC_QUEUE_REGS = 0x00040, /* Has Queue management registers */
+ AHC_SG_PRELOAD = 0x00080, /* Can perform auto-SG preload */
+ AHC_SPIOCAP = 0x00100, /* Has a Serial Port I/O Cap Register */
+ AHC_MULTI_TID = 0x00200, /* Has bitmask of TIDs for select-in */
+ AHC_HS_MAILBOX = 0x00400, /* Has HS_MAILBOX register */
+ AHC_DT = 0x00800, /* Double Transition transfers */
+ AHC_NEW_TERMCTL = 0x01000, /* Newer termination scheme */
+ AHC_MULTI_FUNC = 0x02000, /* Multi-Function Twin Channel Device */
+ AHC_LARGE_SCBS = 0x04000, /* 64byte SCBs */
+ AHC_AUTORATE = 0x08000, /* Automatic update of SCSIRATE/OFFSET*/
+ AHC_AUTOPAUSE = 0x10000, /* Automatic pause on register access */
+ AHC_TARGETMODE = 0x20000, /* Has tested target mode support */
+ AHC_MULTIROLE = 0x40000, /* Space for two roles at a time */
+ AHC_REMOVABLE = 0x80000, /* Hot-Swap supported */
+ AHC_AIC7770_FE = AHC_FENONE,
+ /*
+ * The real 7850 does not support Ultra modes, but there are
+ * several cards that use the generic 7850 PCI ID even though
+ * they are using an Ultra capable chip (7859/7860). We start
+ * out with the AHC_ULTRA feature set and then check the DEVSTATUS
+ * register to determine if the capability is really present.
+ */
+ AHC_AIC7850_FE = AHC_SPIOCAP|AHC_AUTOPAUSE|AHC_TARGETMODE|AHC_ULTRA,
+ AHC_AIC7860_FE = AHC_AIC7850_FE,
+ AHC_AIC7870_FE = AHC_TARGETMODE,
+ AHC_AIC7880_FE = AHC_AIC7870_FE|AHC_ULTRA,
+ /*
+ * Although we have space for both the initiator and
+ * target roles on ULTRA2 chips, we currently disable
+ * the initiator role to allow multi-scsi-id target mode
+ * configurations. We can only respond on the same SCSI
+ * ID as our initiator role if we allow initiator operation.
+ * At some point, we should add a configuration knob to
+ * allow both roles to be loaded.
+ */
+ AHC_AIC7890_FE = AHC_MORE_SRAM|AHC_CMD_CHAN|AHC_ULTRA2
+ |AHC_QUEUE_REGS|AHC_SG_PRELOAD|AHC_MULTI_TID
+ |AHC_HS_MAILBOX|AHC_NEW_TERMCTL|AHC_LARGE_SCBS
+ |AHC_TARGETMODE,
+ AHC_AIC7892_FE = AHC_AIC7890_FE|AHC_DT|AHC_AUTORATE|AHC_AUTOPAUSE,
+ AHC_AIC7895_FE = AHC_AIC7880_FE|AHC_MORE_SRAM|AHC_AUTOPAUSE
+ |AHC_CMD_CHAN|AHC_MULTI_FUNC|AHC_LARGE_SCBS,
+ AHC_AIC7895C_FE = AHC_AIC7895_FE|AHC_MULTI_TID,
+ AHC_AIC7896_FE = AHC_AIC7890_FE|AHC_MULTI_FUNC,
+ AHC_AIC7899_FE = AHC_AIC7892_FE|AHC_MULTI_FUNC
+} ahc_feature;
+
+/*
+ * Bugs in the silicon that we work around in software.
+ */
+typedef enum {
+ AHC_BUGNONE = 0x00,
+ /*
+ * On all chips prior to the U2 product line,
+ * the WIDEODD S/G segment feature does not
+ * work during scsi->HostBus transfers.
+ */
+ AHC_TMODE_WIDEODD_BUG = 0x01,
+ /*
+ * On the aic7890/91 Rev 0 chips, the autoflush
+ * feature does not work. A manual flush of
+ * the DMA FIFO is required.
+ */
+ AHC_AUTOFLUSH_BUG = 0x02,
+ /*
+ * On many chips, cacheline streaming does not work.
+ */
+ AHC_CACHETHEN_BUG = 0x04,
+ /*
+ * On the aic7896/97 chips, cacheline
+ * streaming must be enabled.
+ */
+ AHC_CACHETHEN_DIS_BUG = 0x08,
+ /*
+ * PCI 2.1 Retry failure on non-empty data fifo.
+ */
+ AHC_PCI_2_1_RETRY_BUG = 0x10,
+ /*
+ * Controller does not handle cacheline residuals
+ * properly on S/G segments if PCI MWI instructions
+ * are allowed.
+ */
+ AHC_PCI_MWI_BUG = 0x20,
+ /*
+ * An SCB upload using the SCB channel's
+ * auto array entry copy feature may
+ * corrupt data. This appears to only
+ * occur on 66MHz systems.
+ */
+ AHC_SCBCHAN_UPLOAD_BUG = 0x40
+} ahc_bug;
+
+/*
+ * Configuration specific settings.
+ * The driver determines these settings by probing the
+ * chip/controller's configuration.
+ */
+typedef enum {
+ AHC_FNONE = 0x000,
+ AHC_PRIMARY_CHANNEL = 0x003, /*
+ * The channel that should
+ * be probed first.
+ */
+ AHC_USEDEFAULTS = 0x004, /*
+ * For cards without an seeprom
+ * or a BIOS to initialize the chip's
+ * SRAM, we use the default target
+ * settings.
+ */
+ AHC_SEQUENCER_DEBUG = 0x008,
+ AHC_SHARED_SRAM = 0x010,
+ AHC_LARGE_SEEPROM = 0x020, /* Uses C56_66 not C46 */
+ AHC_RESET_BUS_A = 0x040,
+ AHC_RESET_BUS_B = 0x080,
+ AHC_EXTENDED_TRANS_A = 0x100,
+ AHC_EXTENDED_TRANS_B = 0x200,
+ AHC_TERM_ENB_A = 0x400,
+ AHC_TERM_ENB_B = 0x800,
+ AHC_INITIATORROLE = 0x1000, /*
+ * Allow initiator operations on
+ * this controller.
+ */
+ AHC_TARGETROLE = 0x2000, /*
+ * Allow target operations on this
+ * controller.
+ */
+ AHC_NEWEEPROM_FMT = 0x4000,
+ AHC_RESOURCE_SHORTAGE = 0x8000,
+ AHC_TQINFIFO_BLOCKED = 0x10000, /* Blocked waiting for ATIOs */
+ AHC_INT50_SPEEDFLEX = 0x20000, /*
+ * Internal 50pin connector
+ * sits behind an aic3860
+ */
+ AHC_SCB_BTT = 0x40000, /*
+ * The busy targets table is
+ * stored in SCB space rather
+ * than SRAM.
+ */
+ AHC_BIOS_ENABLED = 0x80000,
+ AHC_ALL_INTERRUPTS = 0x100000,
+ AHC_PAGESCBS = 0x400000, /* Enable SCB paging */
+ AHC_EDGE_INTERRUPT = 0x800000, /* Device uses edge triggered ints */
+ AHC_39BIT_ADDRESSING = 0x1000000, /* Use 39 bit addressing scheme. */
+ AHC_LSCBS_ENABLED = 0x2000000, /* 64Byte SCBs enabled */
+ AHC_SCB_CONFIG_USED = 0x4000000, /* No SEEPROM but SCB2 had info. */
+ AHC_NO_BIOS_INIT = 0x8000000, /* No BIOS left over settings. */
+ AHC_DISABLE_PCI_PERR = 0x10000000,
+ AHC_HAS_TERM_LOGIC = 0x20000000
+} ahc_flag;
+
+/************************* Hardware SCB Definition ***************************/
+
+/*
+ * The driver keeps up to MAX_SCB scb structures per card in memory. The SCB
+ * consists of a "hardware SCB" mirroring the fields available on the card
+ * and additional information the kernel stores for each transaction.
+ *
+ * To minimize space utilization, a portion of the hardware scb stores
+ * different data during different portions of a SCSI transaction.
+ * As initialized by the host driver for the initiator role, this area
+ * contains the SCSI cdb (or a pointer to the cdb) to be executed. After
+ * the cdb has been presented to the target, this area serves to store
+ * residual transfer information and the SCSI status byte.
+ * For the target role, the contents of this area do not change, but
+ * still serve a different purpose than for the initiator role. See
+ * struct target_data for details.
+ */
+
+/*
+ * Status information embedded in the shared poriton of
+ * an SCB after passing the cdb to the target. The kernel
+ * driver will only read this data for transactions that
+ * complete abnormally (non-zero status byte).
+ */
+struct status_pkt {
+ uint32_t residual_datacnt; /* Residual in the current S/G seg */
+ uint32_t residual_sg_ptr; /* The next S/G for this transfer */
+ uint8_t scsi_status; /* Standard SCSI status byte */
+};
+
+/*
+ * Target mode version of the shared data SCB segment.
+ */
+struct target_data {
+ uint32_t residual_datacnt; /* Residual in the current S/G seg */
+ uint32_t residual_sg_ptr; /* The next S/G for this transfer */
+ uint8_t scsi_status; /* SCSI status to give to initiator */
+ uint8_t target_phases; /* Bitmap of phases to execute */
+ uint8_t data_phase; /* Data-In or Data-Out */
+ uint8_t initiator_tag; /* Initiator's transaction tag */
+};
+
+struct hardware_scb {
+/*0*/ union {
+ /*
+ * If the cdb is 12 bytes or less, we embed it directly
+ * in the SCB. For longer cdbs, we embed the address
+ * of the cdb payload as seen by the chip and a DMA
+ * is used to pull it in.
+ */
+ uint8_t cdb[12];
+ uint32_t cdb_ptr;
+ struct status_pkt status;
+ struct target_data tdata;
+ } shared_data;
+/*
+ * A word about residuals.
+ * The scb is presented to the sequencer with the dataptr and datacnt
+ * fields initialized to the contents of the first S/G element to
+ * transfer. The sgptr field is initialized to the bus address for
+ * the S/G element that follows the first in the in core S/G array
+ * or'ed with the SG_FULL_RESID flag. Sgptr may point to an invalid
+ * S/G entry for this transfer (single S/G element transfer with the
+ * first elements address and length preloaded in the dataptr/datacnt
+ * fields). If no transfer is to occur, sgptr is set to SG_LIST_NULL.
+ * The SG_FULL_RESID flag ensures that the residual will be correctly
+ * noted even if no data transfers occur. Once the data phase is entered,
+ * the residual sgptr and datacnt are loaded from the sgptr and the
+ * datacnt fields. After each S/G element's dataptr and length are
+ * loaded into the hardware, the residual sgptr is advanced. After
+ * each S/G element is expired, its datacnt field is checked to see
+ * if the LAST_SEG flag is set. If so, SG_LIST_NULL is set in the
+ * residual sg ptr and the transfer is considered complete. If the
+ * sequencer determines that there is a residual in the tranfer, it
+ * will set the SG_RESID_VALID flag in sgptr and dma the scb back into
+ * host memory. To sumarize:
+ *
+ * Sequencer:
+ * o A residual has occurred if SG_FULL_RESID is set in sgptr,
+ * or residual_sgptr does not have SG_LIST_NULL set.
+ *
+ * o We are transfering the last segment if residual_datacnt has
+ * the SG_LAST_SEG flag set.
+ *
+ * Host:
+ * o A residual has occurred if a completed scb has the
+ * SG_RESID_VALID flag set.
+ *
+ * o residual_sgptr and sgptr refer to the "next" sg entry
+ * and so may point beyond the last valid sg entry for the
+ * transfer.
+ */
+/*12*/ uint32_t dataptr;
+/*16*/ uint32_t datacnt; /*
+ * Byte 3 (numbered from 0) of
+ * the datacnt is really the
+ * 4th byte in that data address.
+ */
+/*20*/ uint32_t sgptr;
+#define SG_PTR_MASK 0xFFFFFFF8
+/*24*/ uint8_t control; /* See SCB_CONTROL in aic7xxx.reg for details */
+/*25*/ uint8_t scsiid; /* what to load in the SCSIID register */
+/*26*/ uint8_t lun;
+/*27*/ uint8_t tag; /*
+ * Index into our kernel SCB array.
+ * Also used as the tag for tagged I/O
+ */
+/*28*/ uint8_t cdb_len;
+/*29*/ uint8_t scsirate; /* Value for SCSIRATE register */
+/*30*/ uint8_t scsioffset; /* Value for SCSIOFFSET register */
+/*31*/ uint8_t next; /*
+ * Used for threading SCBs in the
+ * "Waiting for Selection" and
+ * "Disconnected SCB" lists down
+ * in the sequencer.
+ */
+/*32*/ uint8_t cdb32[32]; /*
+ * CDB storage for cdbs of size
+ * 13->32. We store them here
+ * because hardware scbs are
+ * allocated from DMA safe
+ * memory so we are guaranteed
+ * the controller can access
+ * this data.
+ */
+};
+
+/************************ Kernel SCB Definitions ******************************/
+/*
+ * Some fields of the SCB are OS dependent. Here we collect the
+ * definitions for elements that all OS platforms need to include
+ * in there SCB definition.
+ */
+
+/*
+ * Definition of a scatter/gather element as transfered to the controller.
+ * The aic7xxx chips only support a 24bit length. We use the top byte of
+ * the length to store additional address bits and a flag to indicate
+ * that a given segment terminates the transfer. This gives us an
+ * addressable range of 512GB on machines with 64bit PCI or with chips
+ * that can support dual address cycles on 32bit PCI busses.
+ */
+struct ahc_dma_seg {
+ uint32_t addr;
+ uint32_t len;
+#define AHC_DMA_LAST_SEG 0x80000000
+#define AHC_SG_HIGH_ADDR_MASK 0x7F000000
+#define AHC_SG_LEN_MASK 0x00FFFFFF
+};
+
+struct sg_map_node {
+ bus_dmamap_t sg_dmamap;
+ dma_addr_t sg_physaddr;
+ struct ahc_dma_seg* sg_vaddr;
+ SLIST_ENTRY(sg_map_node) links;
+};
+
+/*
+ * The current state of this SCB.
+ */
+typedef enum {
+ SCB_FREE = 0x0000,
+ SCB_OTHERTCL_TIMEOUT = 0x0002,/*
+ * Another device was active
+ * during the first timeout for
+ * this SCB so we gave ourselves
+ * an additional timeout period
+ * in case it was hogging the
+ * bus.
+ */
+ SCB_DEVICE_RESET = 0x0004,
+ SCB_SENSE = 0x0008,
+ SCB_CDB32_PTR = 0x0010,
+ SCB_RECOVERY_SCB = 0x0020,
+ SCB_AUTO_NEGOTIATE = 0x0040,/* Negotiate to achieve goal. */
+ SCB_NEGOTIATE = 0x0080,/* Negotiation forced for command. */
+ SCB_ABORT = 0x0100,
+ SCB_UNTAGGEDQ = 0x0200,
+ SCB_ACTIVE = 0x0400,
+ SCB_TARGET_IMMEDIATE = 0x0800,
+ SCB_TRANSMISSION_ERROR = 0x1000,/*
+ * We detected a parity or CRC
+ * error that has effected the
+ * payload of the command. This
+ * flag is checked when normal
+ * status is returned to catch
+ * the case of a target not
+ * responding to our attempt
+ * to report the error.
+ */
+ SCB_TARGET_SCB = 0x2000,
+ SCB_SILENT = 0x4000 /*
+ * Be quiet about transmission type
+ * errors. They are expected and we
+ * don't want to upset the user. This
+ * flag is typically used during DV.
+ */
+} scb_flag;
+
+struct scb {
+ struct hardware_scb *hscb;
+ union {
+ SLIST_ENTRY(scb) sle;
+ TAILQ_ENTRY(scb) tqe;
+ } links;
+ LIST_ENTRY(scb) pending_links;
+ ahc_io_ctx_t io_ctx;
+ struct ahc_softc *ahc_softc;
+ scb_flag flags;
+#ifndef __linux__
+ bus_dmamap_t dmamap;
+#endif
+ struct scb_platform_data *platform_data;
+ struct sg_map_node *sg_map;
+ struct ahc_dma_seg *sg_list;
+ dma_addr_t sg_list_phys;
+ u_int sg_count;/* How full ahc_dma_seg is */
+};
+
+struct scb_data {
+ SLIST_HEAD(, scb) free_scbs; /*
+ * Pool of SCBs ready to be assigned
+ * commands to execute.
+ */
+ struct scb *scbindex[256]; /*
+ * Mapping from tag to SCB.
+ * As tag identifiers are an
+ * 8bit value, we provide space
+ * for all possible tag values.
+ * Any lookups to entries at or
+ * above AHC_SCB_MAX_ALLOC will
+ * always fail.
+ */
+ struct hardware_scb *hscbs; /* Array of hardware SCBs */
+ struct scb *scbarray; /* Array of kernel SCBs */
+ struct scsi_sense_data *sense; /* Per SCB sense data */
+
+ /*
+ * "Bus" addresses of our data structures.
+ */
+ bus_dma_tag_t hscb_dmat; /* dmat for our hardware SCB array */
+ bus_dmamap_t hscb_dmamap;
+ dma_addr_t hscb_busaddr;
+ bus_dma_tag_t sense_dmat;
+ bus_dmamap_t sense_dmamap;
+ dma_addr_t sense_busaddr;
+ bus_dma_tag_t sg_dmat; /* dmat for our sg segments */
+ SLIST_HEAD(, sg_map_node) sg_maps;
+ uint8_t numscbs;
+ uint8_t maxhscbs; /* Number of SCBs on the card */
+ uint8_t init_level; /*
+ * How far we've initialized
+ * this structure.
+ */
+};
+
+/************************ Target Mode Definitions *****************************/
+
+/*
+ * Connection desciptor for select-in requests in target mode.
+ */
+struct target_cmd {
+ uint8_t scsiid; /* Our ID and the initiator's ID */
+ uint8_t identify; /* Identify message */
+ uint8_t bytes[22]; /*
+ * Bytes contains any additional message
+ * bytes terminated by 0xFF. The remainder
+ * is the cdb to execute.
+ */
+ uint8_t cmd_valid; /*
+ * When a command is complete, the firmware
+ * will set cmd_valid to all bits set.
+ * After the host has seen the command,
+ * the bits are cleared. This allows us
+ * to just peek at host memory to determine
+ * if more work is complete. cmd_valid is on
+ * an 8 byte boundary to simplify setting
+ * it on aic7880 hardware which only has
+ * limited direct access to the DMA FIFO.
+ */
+ uint8_t pad[7];
+};
+
+/*
+ * Number of events we can buffer up if we run out
+ * of immediate notify ccbs.
+ */
+#define AHC_TMODE_EVENT_BUFFER_SIZE 8
+struct ahc_tmode_event {
+ uint8_t initiator_id;
+ uint8_t event_type; /* MSG type or EVENT_TYPE_BUS_RESET */
+#define EVENT_TYPE_BUS_RESET 0xFF
+ uint8_t event_arg;
+};
+
+/*
+ * Per enabled lun target mode state.
+ * As this state is directly influenced by the host OS'es target mode
+ * environment, we let the OS module define it. Forward declare the
+ * structure here so we can store arrays of them, etc. in OS neutral
+ * data structures.
+ */
+#ifdef AHC_TARGET_MODE
+struct ahc_tmode_lstate {
+ struct cam_path *path;
+ struct ccb_hdr_slist accept_tios;
+ struct ccb_hdr_slist immed_notifies;
+ struct ahc_tmode_event event_buffer[AHC_TMODE_EVENT_BUFFER_SIZE];
+ uint8_t event_r_idx;
+ uint8_t event_w_idx;
+};
+#else
+struct ahc_tmode_lstate;
+#endif
+
+/******************** Transfer Negotiation Datastructures *********************/
+#define AHC_TRANS_CUR 0x01 /* Modify current neogtiation status */
+#define AHC_TRANS_ACTIVE 0x03 /* Assume this target is on the bus */
+#define AHC_TRANS_GOAL 0x04 /* Modify negotiation goal */
+#define AHC_TRANS_USER 0x08 /* Modify user negotiation settings */
+
+#define AHC_WIDTH_UNKNOWN 0xFF
+#define AHC_PERIOD_UNKNOWN 0xFF
+#define AHC_OFFSET_UNKNOWN 0xFF
+#define AHC_PPR_OPTS_UNKNOWN 0xFF
+
+/*
+ * Transfer Negotiation Information.
+ */
+struct ahc_transinfo {
+ uint8_t protocol_version; /* SCSI Revision level */
+ uint8_t transport_version; /* SPI Revision level */
+ uint8_t width; /* Bus width */
+ uint8_t period; /* Sync rate factor */
+ uint8_t offset; /* Sync offset */
+ uint8_t ppr_options; /* Parallel Protocol Request options */
+};
+
+/*
+ * Per-initiator current, goal and user transfer negotiation information. */
+struct ahc_initiator_tinfo {
+ uint8_t scsirate; /* Computed value for SCSIRATE reg */
+ struct ahc_transinfo curr;
+ struct ahc_transinfo goal;
+ struct ahc_transinfo user;
+};
+
+/*
+ * Per enabled target ID state.
+ * Pointers to lun target state as well as sync/wide negotiation information
+ * for each initiator<->target mapping. For the initiator role we pretend
+ * that we are the target and the targets are the initiators since the
+ * negotiation is the same regardless of role.
+ */
+struct ahc_tmode_tstate {
+ struct ahc_tmode_lstate* enabled_luns[AHC_NUM_LUNS];
+ struct ahc_initiator_tinfo transinfo[AHC_NUM_TARGETS];
+
+ /*
+ * Per initiator state bitmasks.
+ */
+ uint16_t auto_negotiate;/* Auto Negotiation Required */
+ uint16_t ultraenb; /* Using ultra sync rate */
+ uint16_t discenable; /* Disconnection allowed */
+ uint16_t tagenable; /* Tagged Queuing allowed */
+};
+
+/*
+ * Data structure for our table of allowed synchronous transfer rates.
+ */
+struct ahc_syncrate {
+ u_int sxfr_u2; /* Value of the SXFR parameter for Ultra2+ Chips */
+ u_int sxfr; /* Value of the SXFR parameter for <= Ultra Chips */
+#define ULTRA_SXFR 0x100 /* Rate Requires Ultra Mode set */
+#define ST_SXFR 0x010 /* Rate Single Transition Only */
+#define DT_SXFR 0x040 /* Rate Double Transition Only */
+ uint8_t period; /* Period to send to SCSI target */
+ char *rate;
+};
+
+/* Safe and valid period for async negotiations. */
+#define AHC_ASYNC_XFER_PERIOD 0x45
+#define AHC_ULTRA2_XFER_PERIOD 0x0a
+
+/*
+ * Indexes into our table of syncronous transfer rates.
+ */
+#define AHC_SYNCRATE_DT 0
+#define AHC_SYNCRATE_ULTRA2 1
+#define AHC_SYNCRATE_ULTRA 3
+#define AHC_SYNCRATE_FAST 6
+#define AHC_SYNCRATE_MAX AHC_SYNCRATE_DT
+#define AHC_SYNCRATE_MIN 13
+
+/***************************** Lookup Tables **********************************/
+/*
+ * Phase -> name and message out response
+ * to parity errors in each phase table.
+ */
+struct ahc_phase_table_entry {
+ uint8_t phase;
+ uint8_t mesg_out; /* Message response to parity errors */
+ char *phasemsg;
+};
+
+/************************** Serial EEPROM Format ******************************/
+
+struct seeprom_config {
+/*
+ * Per SCSI ID Configuration Flags
+ */
+ uint16_t device_flags[16]; /* words 0-15 */
+#define CFXFER 0x0007 /* synchronous transfer rate */
+#define CFSYNCH 0x0008 /* enable synchronous transfer */
+#define CFDISC 0x0010 /* enable disconnection */
+#define CFWIDEB 0x0020 /* wide bus device */
+#define CFSYNCHISULTRA 0x0040 /* CFSYNCH is an ultra offset (2940AU)*/
+#define CFSYNCSINGLE 0x0080 /* Single-Transition signalling */
+#define CFSTART 0x0100 /* send start unit SCSI command */
+#define CFINCBIOS 0x0200 /* include in BIOS scan */
+#define CFRNFOUND 0x0400 /* report even if not found */
+#define CFMULTILUNDEV 0x0800 /* Probe multiple luns in BIOS scan */
+#define CFWBCACHEENB 0x4000 /* Enable W-Behind Cache on disks */
+#define CFWBCACHENOP 0xc000 /* Don't touch W-Behind Cache */
+
+/*
+ * BIOS Control Bits
+ */
+ uint16_t bios_control; /* word 16 */
+#define CFSUPREM 0x0001 /* support all removeable drives */
+#define CFSUPREMB 0x0002 /* support removeable boot drives */
+#define CFBIOSEN 0x0004 /* BIOS enabled */
+#define CFBIOS_BUSSCAN 0x0008 /* Have the BIOS Scan the Bus */
+#define CFSM2DRV 0x0010 /* support more than two drives */
+#define CFSTPWLEVEL 0x0010 /* Termination level control */
+#define CF284XEXTEND 0x0020 /* extended translation (284x cards) */
+#define CFCTRL_A 0x0020 /* BIOS displays Ctrl-A message */
+#define CFTERM_MENU 0x0040 /* BIOS displays termination menu */
+#define CFEXTEND 0x0080 /* extended translation enabled */
+#define CFSCAMEN 0x0100 /* SCAM enable */
+#define CFMSG_LEVEL 0x0600 /* BIOS Message Level */
+#define CFMSG_VERBOSE 0x0000
+#define CFMSG_SILENT 0x0200
+#define CFMSG_DIAG 0x0400
+#define CFBOOTCD 0x0800 /* Support Bootable CD-ROM */
+/* UNUSED 0xff00 */
+
+/*
+ * Host Adapter Control Bits
+ */
+ uint16_t adapter_control; /* word 17 */
+#define CFAUTOTERM 0x0001 /* Perform Auto termination */
+#define CFULTRAEN 0x0002 /* Ultra SCSI speed enable */
+#define CF284XSELTO 0x0003 /* Selection timeout (284x cards) */
+#define CF284XFIFO 0x000C /* FIFO Threshold (284x cards) */
+#define CFSTERM 0x0004 /* SCSI low byte termination */
+#define CFWSTERM 0x0008 /* SCSI high byte termination */
+#define CFSPARITY 0x0010 /* SCSI parity */
+#define CF284XSTERM 0x0020 /* SCSI low byte term (284x cards) */
+#define CFMULTILUN 0x0020
+#define CFRESETB 0x0040 /* reset SCSI bus at boot */
+#define CFCLUSTERENB 0x0080 /* Cluster Enable */
+#define CFBOOTCHAN 0x0300 /* probe this channel first */
+#define CFBOOTCHANSHIFT 8
+#define CFSEAUTOTERM 0x0400 /* Ultra2 Perform secondary Auto Term*/
+#define CFSELOWTERM 0x0800 /* Ultra2 secondary low term */
+#define CFSEHIGHTERM 0x1000 /* Ultra2 secondary high term */
+#define CFENABLEDV 0x4000 /* Perform Domain Validation*/
+
+/*
+ * Bus Release Time, Host Adapter ID
+ */
+ uint16_t brtime_id; /* word 18 */
+#define CFSCSIID 0x000f /* host adapter SCSI ID */
+/* UNUSED 0x00f0 */
+#define CFBRTIME 0xff00 /* bus release time */
+
+/*
+ * Maximum targets
+ */
+ uint16_t max_targets; /* word 19 */
+#define CFMAXTARG 0x00ff /* maximum targets */
+#define CFBOOTLUN 0x0f00 /* Lun to boot from */
+#define CFBOOTID 0xf000 /* Target to boot from */
+ uint16_t res_1[10]; /* words 20-29 */
+ uint16_t signature; /* Signature == 0x250 */
+#define CFSIGNATURE 0x250
+#define CFSIGNATURE2 0x300
+ uint16_t checksum; /* word 31 */
+};
+
+/**************************** Message Buffer *********************************/
+typedef enum {
+ MSG_TYPE_NONE = 0x00,
+ MSG_TYPE_INITIATOR_MSGOUT = 0x01,
+ MSG_TYPE_INITIATOR_MSGIN = 0x02,
+ MSG_TYPE_TARGET_MSGOUT = 0x03,
+ MSG_TYPE_TARGET_MSGIN = 0x04
+} ahc_msg_type;
+
+typedef enum {
+ MSGLOOP_IN_PROG,
+ MSGLOOP_MSGCOMPLETE,
+ MSGLOOP_TERMINATED
+} msg_loop_stat;
+
+/*********************** Software Configuration Structure *********************/
+TAILQ_HEAD(scb_tailq, scb);
+
+struct ahc_aic7770_softc {
+ /*
+ * Saved register state used for chip_init().
+ */
+ uint8_t busspd;
+ uint8_t bustime;
+};
+
+struct ahc_pci_softc {
+ /*
+ * Saved register state used for chip_init().
+ */
+ uint32_t devconfig;
+ uint16_t targcrccnt;
+ uint8_t command;
+ uint8_t csize_lattime;
+ uint8_t optionmode;
+ uint8_t crccontrol1;
+ uint8_t dscommand0;
+ uint8_t dspcistatus;
+ uint8_t scbbaddr;
+ uint8_t dff_thrsh;
+};
+
+union ahc_bus_softc {
+ struct ahc_aic7770_softc aic7770_softc;
+ struct ahc_pci_softc pci_softc;
+};
+
+typedef void (*ahc_bus_intr_t)(struct ahc_softc *);
+typedef int (*ahc_bus_chip_init_t)(struct ahc_softc *);
+typedef int (*ahc_bus_suspend_t)(struct ahc_softc *);
+typedef int (*ahc_bus_resume_t)(struct ahc_softc *);
+typedef void ahc_callback_t (void *);
+
+struct ahc_softc {
+ bus_space_tag_t tag;
+ bus_space_handle_t bsh;
+#ifndef __linux__
+ bus_dma_tag_t buffer_dmat; /* dmat for buffer I/O */
+#endif
+ struct scb_data *scb_data;
+
+ struct scb *next_queued_scb;
+
+ /*
+ * SCBs that have been sent to the controller
+ */
+ LIST_HEAD(, scb) pending_scbs;
+
+ /*
+ * Counting lock for deferring the release of additional
+ * untagged transactions from the untagged_queues. When
+ * the lock is decremented to 0, all queues in the
+ * untagged_queues array are run.
+ */
+ u_int untagged_queue_lock;
+
+ /*
+ * Per-target queue of untagged-transactions. The
+ * transaction at the head of the queue is the
+ * currently pending untagged transaction for the
+ * target. The driver only allows a single untagged
+ * transaction per target.
+ */
+ struct scb_tailq untagged_queues[AHC_NUM_TARGETS];
+
+ /*
+ * Bus attachment specific data.
+ */
+ union ahc_bus_softc bus_softc;
+
+ /*
+ * Platform specific data.
+ */
+ struct ahc_platform_data *platform_data;
+
+ /*
+ * Platform specific device information.
+ */
+ ahc_dev_softc_t dev_softc;
+
+ /*
+ * Bus specific device information.
+ */
+ ahc_bus_intr_t bus_intr;
+
+ /*
+ * Bus specific initialization required
+ * after a chip reset.
+ */
+ ahc_bus_chip_init_t bus_chip_init;
+
+ /*
+ * Bus specific suspend routine.
+ */
+ ahc_bus_suspend_t bus_suspend;
+
+ /*
+ * Bus specific resume routine.
+ */
+ ahc_bus_resume_t bus_resume;
+
+ /*
+ * Target mode related state kept on a per enabled lun basis.
+ * Targets that are not enabled will have null entries.
+ * As an initiator, we keep one target entry for our initiator
+ * ID to store our sync/wide transfer settings.
+ */
+ struct ahc_tmode_tstate *enabled_targets[AHC_NUM_TARGETS];
+
+ /*
+ * The black hole device responsible for handling requests for
+ * disabled luns on enabled targets.
+ */
+ struct ahc_tmode_lstate *black_hole;
+
+ /*
+ * Device instance currently on the bus awaiting a continue TIO
+ * for a command that was not given the disconnect priveledge.
+ */
+ struct ahc_tmode_lstate *pending_device;
+
+ /*
+ * Card characteristics
+ */
+ ahc_chip chip;
+ ahc_feature features;
+ ahc_bug bugs;
+ ahc_flag flags;
+ struct seeprom_config *seep_config;
+
+ /* Values to store in the SEQCTL register for pause and unpause */
+ uint8_t unpause;
+ uint8_t pause;
+
+ /* Command Queues */
+ uint8_t qoutfifonext;
+ uint8_t qinfifonext;
+ uint8_t *qoutfifo;
+ uint8_t *qinfifo;
+
+ /* Critical Section Data */
+ struct cs *critical_sections;
+ u_int num_critical_sections;
+
+ /* Links for chaining softcs */
+ TAILQ_ENTRY(ahc_softc) links;
+
+ /* Channel Names ('A', 'B', etc.) */
+ char channel;
+ char channel_b;
+
+ /* Initiator Bus ID */
+ uint8_t our_id;
+ uint8_t our_id_b;
+
+ /*
+ * PCI error detection.
+ */
+ int unsolicited_ints;
+
+ /*
+ * Target incoming command FIFO.
+ */
+ struct target_cmd *targetcmds;
+ uint8_t tqinfifonext;
+
+ /*
+ * Cached copy of the sequencer control register.
+ */
+ uint8_t seqctl;
+
+ /*
+ * Incoming and outgoing message handling.
+ */
+ uint8_t send_msg_perror;
+ ahc_msg_type msg_type;
+ uint8_t msgout_buf[12];/* Message we are sending */
+ uint8_t msgin_buf[12];/* Message we are receiving */
+ u_int msgout_len; /* Length of message to send */
+ u_int msgout_index; /* Current index in msgout */
+ u_int msgin_index; /* Current index in msgin */
+
+ /*
+ * Mapping information for data structures shared
+ * between the sequencer and kernel.
+ */
+ bus_dma_tag_t parent_dmat;
+ bus_dma_tag_t shared_data_dmat;
+ bus_dmamap_t shared_data_dmamap;
+ dma_addr_t shared_data_busaddr;
+
+ /*
+ * Bus address of the one byte buffer used to
+ * work-around a DMA bug for chips <= aic7880
+ * in target mode.
+ */
+ dma_addr_t dma_bug_buf;
+
+ /* Number of enabled target mode device on this card */
+ u_int enabled_luns;
+
+ /* Initialization level of this data structure */
+ u_int init_level;
+
+ /* PCI cacheline size. */
+ u_int pci_cachesize;
+
+ /*
+ * Count of parity errors we have seen as a target.
+ * We auto-disable parity error checking after seeing
+ * AHC_PCI_TARGET_PERR_THRESH number of errors.
+ */
+ u_int pci_target_perr_count;
+#define AHC_PCI_TARGET_PERR_THRESH 10
+
+ /* Maximum number of sequencer instructions supported. */
+ u_int instruction_ram_size;
+
+ /* Per-Unit descriptive information */
+ const char *description;
+ char *name;
+ int unit;
+
+ /* Selection Timer settings */
+ int seltime;
+ int seltime_b;
+
+ uint16_t user_discenable;/* Disconnection allowed */
+ uint16_t user_tagenable;/* Tagged Queuing allowed */
+};
+
+TAILQ_HEAD(ahc_softc_tailq, ahc_softc);
+extern struct ahc_softc_tailq ahc_tailq;
+
+/************************ Active Device Information ***************************/
+typedef enum {
+ ROLE_UNKNOWN,
+ ROLE_INITIATOR,
+ ROLE_TARGET
+} role_t;
+
+struct ahc_devinfo {
+ int our_scsiid;
+ int target_offset;
+ uint16_t target_mask;
+ u_int target;
+ u_int lun;
+ char channel;
+ role_t role; /*
+ * Only guaranteed to be correct if not
+ * in the busfree state.
+ */
+};
+
+/****************************** PCI Structures ********************************/
+typedef int (ahc_device_setup_t)(struct ahc_softc *);
+
+struct ahc_pci_identity {
+ uint64_t full_id;
+ uint64_t id_mask;
+ char *name;
+ ahc_device_setup_t *setup;
+};
+extern struct ahc_pci_identity ahc_pci_ident_table[];
+extern const u_int ahc_num_pci_devs;
+
+/***************************** VL/EISA Declarations ***************************/
+struct aic7770_identity {
+ uint32_t full_id;
+ uint32_t id_mask;
+ const char *name;
+ ahc_device_setup_t *setup;
+};
+extern struct aic7770_identity aic7770_ident_table[];
+extern const int ahc_num_aic7770_devs;
+
+#define AHC_EISA_SLOT_OFFSET 0xc00
+#define AHC_EISA_IOSIZE 0x100
+
+/*************************** Function Declarations ****************************/
+/******************************************************************************/
+u_int ahc_index_busy_tcl(struct ahc_softc *ahc, u_int tcl);
+void ahc_unbusy_tcl(struct ahc_softc *ahc, u_int tcl);
+void ahc_busy_tcl(struct ahc_softc *ahc,
+ u_int tcl, u_int busyid);
+
+/***************************** PCI Front End *********************************/
+struct ahc_pci_identity *ahc_find_pci_device(ahc_dev_softc_t);
+int ahc_pci_config(struct ahc_softc *,
+ struct ahc_pci_identity *);
+int ahc_pci_test_register_access(struct ahc_softc *);
+
+/*************************** EISA/VL Front End ********************************/
+struct aic7770_identity *aic7770_find_device(uint32_t);
+int aic7770_config(struct ahc_softc *ahc,
+ struct aic7770_identity *,
+ u_int port);
+
+/************************** SCB and SCB queue management **********************/
+int ahc_probe_scbs(struct ahc_softc *);
+void ahc_run_untagged_queues(struct ahc_softc *ahc);
+void ahc_run_untagged_queue(struct ahc_softc *ahc,
+ struct scb_tailq *queue);
+void ahc_qinfifo_requeue_tail(struct ahc_softc *ahc,
+ struct scb *scb);
+int ahc_match_scb(struct ahc_softc *ahc, struct scb *scb,
+ int target, char channel, int lun,
+ u_int tag, role_t role);
+
+/****************************** Initialization ********************************/
+struct ahc_softc *ahc_alloc(void *platform_arg, char *name);
+int ahc_softc_init(struct ahc_softc *);
+void ahc_controller_info(struct ahc_softc *ahc, char *buf);
+int ahc_chip_init(struct ahc_softc *ahc);
+int ahc_init(struct ahc_softc *ahc);
+void ahc_intr_enable(struct ahc_softc *ahc, int enable);
+void ahc_pause_and_flushwork(struct ahc_softc *ahc);
+int ahc_suspend(struct ahc_softc *ahc);
+int ahc_resume(struct ahc_softc *ahc);
+void ahc_softc_insert(struct ahc_softc *);
+struct ahc_softc *ahc_find_softc(struct ahc_softc *ahc);
+void ahc_set_unit(struct ahc_softc *, int);
+void ahc_set_name(struct ahc_softc *, char *);
+void ahc_alloc_scbs(struct ahc_softc *ahc);
+void ahc_free(struct ahc_softc *ahc);
+int ahc_reset(struct ahc_softc *ahc, int reinit);
+void ahc_shutdown(void *arg);
+
+/*************************** Interrupt Services *******************************/
+void ahc_clear_intstat(struct ahc_softc *ahc);
+void ahc_run_qoutfifo(struct ahc_softc *ahc);
+#ifdef AHC_TARGET_MODE
+void ahc_run_tqinfifo(struct ahc_softc *ahc, int paused);
+#endif
+void ahc_handle_brkadrint(struct ahc_softc *ahc);
+void ahc_handle_seqint(struct ahc_softc *ahc, u_int intstat);
+void ahc_handle_scsiint(struct ahc_softc *ahc,
+ u_int intstat);
+void ahc_clear_critical_section(struct ahc_softc *ahc);
+
+/***************************** Error Recovery *********************************/
+typedef enum {
+ SEARCH_COMPLETE,
+ SEARCH_COUNT,
+ SEARCH_REMOVE
+} ahc_search_action;
+int ahc_search_qinfifo(struct ahc_softc *ahc, int target,
+ char channel, int lun, u_int tag,
+ role_t role, uint32_t status,
+ ahc_search_action action);
+int ahc_search_untagged_queues(struct ahc_softc *ahc,
+ ahc_io_ctx_t ctx,
+ int target, char channel,
+ int lun, uint32_t status,
+ ahc_search_action action);
+int ahc_search_disc_list(struct ahc_softc *ahc, int target,
+ char channel, int lun, u_int tag,
+ int stop_on_first, int remove,
+ int save_state);
+void ahc_freeze_devq(struct ahc_softc *ahc, struct scb *scb);
+int ahc_reset_channel(struct ahc_softc *ahc, char channel,
+ int initiate_reset);
+int ahc_abort_scbs(struct ahc_softc *ahc, int target,
+ char channel, int lun, u_int tag,
+ role_t role, uint32_t status);
+void ahc_restart(struct ahc_softc *ahc);
+void ahc_calc_residual(struct ahc_softc *ahc,
+ struct scb *scb);
+/*************************** Utility Functions ********************************/
+struct ahc_phase_table_entry*
+ ahc_lookup_phase_entry(int phase);
+void ahc_compile_devinfo(struct ahc_devinfo *devinfo,
+ u_int our_id, u_int target,
+ u_int lun, char channel,
+ role_t role);
+/************************** Transfer Negotiation ******************************/
+struct ahc_syncrate* ahc_find_syncrate(struct ahc_softc *ahc, u_int *period,
+ u_int *ppr_options, u_int maxsync);
+u_int ahc_find_period(struct ahc_softc *ahc,
+ u_int scsirate, u_int maxsync);
+void ahc_validate_offset(struct ahc_softc *ahc,
+ struct ahc_initiator_tinfo *tinfo,
+ struct ahc_syncrate *syncrate,
+ u_int *offset, int wide,
+ role_t role);
+void ahc_validate_width(struct ahc_softc *ahc,
+ struct ahc_initiator_tinfo *tinfo,
+ u_int *bus_width,
+ role_t role);
+/*
+ * Negotiation types. These are used to qualify if we should renegotiate
+ * even if our goal and current transport parameters are identical.
+ */
+typedef enum {
+ AHC_NEG_TO_GOAL, /* Renegotiate only if goal and curr differ. */
+ AHC_NEG_IF_NON_ASYNC, /* Renegotiate so long as goal is non-async. */
+ AHC_NEG_ALWAYS /* Renegotiat even if goal is async. */
+} ahc_neg_type;
+int ahc_update_neg_request(struct ahc_softc*,
+ struct ahc_devinfo*,
+ struct ahc_tmode_tstate*,
+ struct ahc_initiator_tinfo*,
+ ahc_neg_type);
+void ahc_set_width(struct ahc_softc *ahc,
+ struct ahc_devinfo *devinfo,
+ u_int width, u_int type, int paused);
+void ahc_set_syncrate(struct ahc_softc *ahc,
+ struct ahc_devinfo *devinfo,
+ struct ahc_syncrate *syncrate,
+ u_int period, u_int offset,
+ u_int ppr_options,
+ u_int type, int paused);
+typedef enum {
+ AHC_QUEUE_NONE,
+ AHC_QUEUE_BASIC,
+ AHC_QUEUE_TAGGED
+} ahc_queue_alg;
+
+void ahc_set_tags(struct ahc_softc *ahc,
+ struct ahc_devinfo *devinfo,
+ ahc_queue_alg alg);
+
+/**************************** Target Mode *************************************/
+#ifdef AHC_TARGET_MODE
+void ahc_send_lstate_events(struct ahc_softc *,
+ struct ahc_tmode_lstate *);
+void ahc_handle_en_lun(struct ahc_softc *ahc,
+ struct cam_sim *sim, union ccb *ccb);
+cam_status ahc_find_tmode_devs(struct ahc_softc *ahc,
+ struct cam_sim *sim, union ccb *ccb,
+ struct ahc_tmode_tstate **tstate,
+ struct ahc_tmode_lstate **lstate,
+ int notfound_failure);
+#ifndef AHC_TMODE_ENABLE
+#define AHC_TMODE_ENABLE 0
+#endif
+#endif
+/******************************* Debug ***************************************/
+#ifdef AHC_DEBUG
+extern uint32_t ahc_debug;
+#define AHC_SHOW_MISC 0x0001
+#define AHC_SHOW_SENSE 0x0002
+#define AHC_DUMP_SEEPROM 0x0004
+#define AHC_SHOW_TERMCTL 0x0008
+#define AHC_SHOW_MEMORY 0x0010
+#define AHC_SHOW_MESSAGES 0x0020
+#define AHC_SHOW_DV 0x0040
+#define AHC_SHOW_SELTO 0x0080
+#define AHC_SHOW_QFULL 0x0200
+#define AHC_SHOW_QUEUE 0x0400
+#define AHC_SHOW_TQIN 0x0800
+#define AHC_SHOW_MASKED_ERRORS 0x1000
+#define AHC_DEBUG_SEQUENCER 0x2000
+#endif
+void ahc_print_scb(struct scb *scb);
+void ahc_print_devinfo(struct ahc_softc *ahc,
+ struct ahc_devinfo *dev);
+void ahc_dump_card_state(struct ahc_softc *ahc);
+int ahc_print_register(ahc_reg_parse_entry_t *table,
+ u_int num_entries,
+ const char *name,
+ u_int address,
+ u_int value,
+ u_int *cur_column,
+ u_int wrap_point);
+/******************************* SEEPROM *************************************/
+int ahc_acquire_seeprom(struct ahc_softc *ahc,
+ struct seeprom_descriptor *sd);
+void ahc_release_seeprom(struct seeprom_descriptor *sd);
+#endif /* _AIC7XXX_H_ */