diff options
Diffstat (limited to 'drivers/scsi/esp.c')
| -rw-r--r-- | drivers/scsi/esp.c | 4402 |
1 files changed, 4402 insertions, 0 deletions
diff --git a/drivers/scsi/esp.c b/drivers/scsi/esp.c new file mode 100644 index 000000000000..d8ab73b68031 --- /dev/null +++ b/drivers/scsi/esp.c @@ -0,0 +1,4402 @@ +/* $Id: esp.c,v 1.101 2002/01/15 06:48:55 davem Exp $ + * esp.c: EnhancedScsiProcessor Sun SCSI driver code. + * + * Copyright (C) 1995, 1998 David S. Miller (davem@caip.rutgers.edu) + */ + +/* TODO: + * + * 1) Maybe disable parity checking in config register one for SCSI1 + * targets. (Gilmore says parity error on the SBus can lock up + * old sun4c's) + * 2) Add support for DMA2 pipelining. + * 3) Add tagged queueing. + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/types.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/blkdev.h> +#include <linux/proc_fs.h> +#include <linux/stat.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/module.h> + +#include "esp.h" + +#include <asm/sbus.h> +#include <asm/dma.h> +#include <asm/system.h> +#include <asm/ptrace.h> +#include <asm/pgtable.h> +#include <asm/oplib.h> +#include <asm/io.h> +#include <asm/irq.h> +#ifndef __sparc_v9__ +#include <asm/machines.h> +#include <asm/idprom.h> +#endif + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_eh.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_tcq.h> + +#define DEBUG_ESP +/* #define DEBUG_ESP_HME */ +/* #define DEBUG_ESP_DATA */ +/* #define DEBUG_ESP_QUEUE */ +/* #define DEBUG_ESP_DISCONNECT */ +/* #define DEBUG_ESP_STATUS */ +/* #define DEBUG_ESP_PHASES */ +/* #define DEBUG_ESP_WORKBUS */ +/* #define DEBUG_STATE_MACHINE */ +/* #define DEBUG_ESP_CMDS */ +/* #define DEBUG_ESP_IRQS */ +/* #define DEBUG_SDTR */ +/* #define DEBUG_ESP_SG */ + +/* Use the following to sprinkle debugging messages in a way which + * suits you if combinations of the above become too verbose when + * trying to track down a specific problem. + */ +/* #define DEBUG_ESP_MISC */ + +#if defined(DEBUG_ESP) +#define ESPLOG(foo) printk foo +#else +#define ESPLOG(foo) +#endif /* (DEBUG_ESP) */ + +#if defined(DEBUG_ESP_HME) +#define ESPHME(foo) printk foo +#else +#define ESPHME(foo) +#endif + +#if defined(DEBUG_ESP_DATA) +#define ESPDATA(foo) printk foo +#else +#define ESPDATA(foo) +#endif + +#if defined(DEBUG_ESP_QUEUE) +#define ESPQUEUE(foo) printk foo +#else +#define ESPQUEUE(foo) +#endif + +#if defined(DEBUG_ESP_DISCONNECT) +#define ESPDISC(foo) printk foo +#else +#define ESPDISC(foo) +#endif + +#if defined(DEBUG_ESP_STATUS) +#define ESPSTAT(foo) printk foo +#else +#define ESPSTAT(foo) +#endif + +#if defined(DEBUG_ESP_PHASES) +#define ESPPHASE(foo) printk foo +#else +#define ESPPHASE(foo) +#endif + +#if defined(DEBUG_ESP_WORKBUS) +#define ESPBUS(foo) printk foo +#else +#define ESPBUS(foo) +#endif + +#if defined(DEBUG_ESP_IRQS) +#define ESPIRQ(foo) printk foo +#else +#define ESPIRQ(foo) +#endif + +#if defined(DEBUG_SDTR) +#define ESPSDTR(foo) printk foo +#else +#define ESPSDTR(foo) +#endif + +#if defined(DEBUG_ESP_MISC) +#define ESPMISC(foo) printk foo +#else +#define ESPMISC(foo) +#endif + +/* Command phase enumeration. */ +enum { + not_issued = 0x00, /* Still in the issue_SC queue. */ + + /* Various forms of selecting a target. */ +#define in_slct_mask 0x10 + in_slct_norm = 0x10, /* ESP is arbitrating, normal selection */ + in_slct_stop = 0x11, /* ESP will select, then stop with IRQ */ + in_slct_msg = 0x12, /* select, then send a message */ + in_slct_tag = 0x13, /* select and send tagged queue msg */ + in_slct_sneg = 0x14, /* select and acquire sync capabilities */ + + /* Any post selection activity. */ +#define in_phases_mask 0x20 + in_datain = 0x20, /* Data is transferring from the bus */ + in_dataout = 0x21, /* Data is transferring to the bus */ + in_data_done = 0x22, /* Last DMA data operation done (maybe) */ + in_msgin = 0x23, /* Eating message from target */ + in_msgincont = 0x24, /* Eating more msg bytes from target */ + in_msgindone = 0x25, /* Decide what to do with what we got */ + in_msgout = 0x26, /* Sending message to target */ + in_msgoutdone = 0x27, /* Done sending msg out */ + in_cmdbegin = 0x28, /* Sending cmd after abnormal selection */ + in_cmdend = 0x29, /* Done sending slow cmd */ + in_status = 0x2a, /* Was in status phase, finishing cmd */ + in_freeing = 0x2b, /* freeing the bus for cmd cmplt or disc */ + in_the_dark = 0x2c, /* Don't know what bus phase we are in */ + + /* Special states, ie. not normal bus transitions... */ +#define in_spec_mask 0x80 + in_abortone = 0x80, /* Aborting one command currently */ + in_abortall = 0x81, /* Blowing away all commands we have */ + in_resetdev = 0x82, /* SCSI target reset in progress */ + in_resetbus = 0x83, /* SCSI bus reset in progress */ + in_tgterror = 0x84, /* Target did something stupid */ +}; + +enum { + /* Zero has special meaning, see skipahead[12]. */ +/*0*/ do_never, + +/*1*/ do_phase_determine, +/*2*/ do_reset_bus, +/*3*/ do_reset_complete, +/*4*/ do_work_bus, +/*5*/ do_intr_end +}; + +/* The master ring of all esp hosts we are managing in this driver. */ +static struct esp *espchain; +static DEFINE_SPINLOCK(espchain_lock); +static int esps_running = 0; + +/* Forward declarations. */ +static irqreturn_t esp_intr(int irq, void *dev_id, struct pt_regs *pregs); + +/* Debugging routines */ +struct esp_cmdstrings { + u8 cmdchar; + char *text; +} esp_cmd_strings[] = { + /* Miscellaneous */ + { ESP_CMD_NULL, "ESP_NOP", }, + { ESP_CMD_FLUSH, "FIFO_FLUSH", }, + { ESP_CMD_RC, "RSTESP", }, + { ESP_CMD_RS, "RSTSCSI", }, + /* Disconnected State Group */ + { ESP_CMD_RSEL, "RESLCTSEQ", }, + { ESP_CMD_SEL, "SLCTNATN", }, + { ESP_CMD_SELA, "SLCTATN", }, + { ESP_CMD_SELAS, "SLCTATNSTOP", }, + { ESP_CMD_ESEL, "ENSLCTRESEL", }, + { ESP_CMD_DSEL, "DISSELRESEL", }, + { ESP_CMD_SA3, "SLCTATN3", }, + { ESP_CMD_RSEL3, "RESLCTSEQ", }, + /* Target State Group */ + { ESP_CMD_SMSG, "SNDMSG", }, + { ESP_CMD_SSTAT, "SNDSTATUS", }, + { ESP_CMD_SDATA, "SNDDATA", }, + { ESP_CMD_DSEQ, "DISCSEQ", }, + { ESP_CMD_TSEQ, "TERMSEQ", }, + { ESP_CMD_TCCSEQ, "TRGTCMDCOMPSEQ", }, + { ESP_CMD_DCNCT, "DISC", }, + { ESP_CMD_RMSG, "RCVMSG", }, + { ESP_CMD_RCMD, "RCVCMD", }, + { ESP_CMD_RDATA, "RCVDATA", }, + { ESP_CMD_RCSEQ, "RCVCMDSEQ", }, + /* Initiator State Group */ + { ESP_CMD_TI, "TRANSINFO", }, + { ESP_CMD_ICCSEQ, "INICMDSEQCOMP", }, + { ESP_CMD_MOK, "MSGACCEPTED", }, + { ESP_CMD_TPAD, "TPAD", }, + { ESP_CMD_SATN, "SATN", }, + { ESP_CMD_RATN, "RATN", }, +}; +#define NUM_ESP_COMMANDS ((sizeof(esp_cmd_strings)) / (sizeof(struct esp_cmdstrings))) + +/* Print textual representation of an ESP command */ +static inline void esp_print_cmd(u8 espcmd) +{ + u8 dma_bit = espcmd & ESP_CMD_DMA; + int i; + + espcmd &= ~dma_bit; + for (i = 0; i < NUM_ESP_COMMANDS; i++) + if (esp_cmd_strings[i].cmdchar == espcmd) + break; + if (i == NUM_ESP_COMMANDS) + printk("ESP_Unknown"); + else + printk("%s%s", esp_cmd_strings[i].text, + ((dma_bit) ? "+DMA" : "")); +} + +/* Print the status register's value */ +static inline void esp_print_statreg(u8 statreg) +{ + u8 phase; + + printk("STATUS<"); + phase = statreg & ESP_STAT_PMASK; + printk("%s,", (phase == ESP_DOP ? "DATA-OUT" : + (phase == ESP_DIP ? "DATA-IN" : + (phase == ESP_CMDP ? "COMMAND" : + (phase == ESP_STATP ? "STATUS" : + (phase == ESP_MOP ? "MSG-OUT" : + (phase == ESP_MIP ? "MSG_IN" : + "unknown"))))))); + if (statreg & ESP_STAT_TDONE) + printk("TRANS_DONE,"); + if (statreg & ESP_STAT_TCNT) + printk("TCOUNT_ZERO,"); + if (statreg & ESP_STAT_PERR) + printk("P_ERROR,"); + if (statreg & ESP_STAT_SPAM) + printk("SPAM,"); + if (statreg & ESP_STAT_INTR) + printk("IRQ,"); + printk(">"); +} + +/* Print the interrupt register's value */ +static inline void esp_print_ireg(u8 intreg) +{ + printk("INTREG< "); + if (intreg & ESP_INTR_S) + printk("SLCT_NATN "); + if (intreg & ESP_INTR_SATN) + printk("SLCT_ATN "); + if (intreg & ESP_INTR_RSEL) + printk("RSLCT "); + if (intreg & ESP_INTR_FDONE) + printk("FDONE "); + if (intreg & ESP_INTR_BSERV) + printk("BSERV "); + if (intreg & ESP_INTR_DC) + printk("DISCNCT "); + if (intreg & ESP_INTR_IC) + printk("ILL_CMD "); + if (intreg & ESP_INTR_SR) + printk("SCSI_BUS_RESET "); + printk(">"); +} + +/* Print the sequence step registers contents */ +static inline void esp_print_seqreg(u8 stepreg) +{ + stepreg &= ESP_STEP_VBITS; + printk("STEP<%s>", + (stepreg == ESP_STEP_ASEL ? "SLCT_ARB_CMPLT" : + (stepreg == ESP_STEP_SID ? "1BYTE_MSG_SENT" : + (stepreg == ESP_STEP_NCMD ? "NOT_IN_CMD_PHASE" : + (stepreg == ESP_STEP_PPC ? "CMD_BYTES_LOST" : + (stepreg == ESP_STEP_FINI4 ? "CMD_SENT_OK" : + "UNKNOWN")))))); +} + +static char *phase_string(int phase) +{ + switch (phase) { + case not_issued: + return "UNISSUED"; + case in_slct_norm: + return "SLCTNORM"; + case in_slct_stop: + return "SLCTSTOP"; + case in_slct_msg: + return "SLCTMSG"; + case in_slct_tag: + return "SLCTTAG"; + case in_slct_sneg: + return "SLCTSNEG"; + case in_datain: + return "DATAIN"; + case in_dataout: + return "DATAOUT"; + case in_data_done: + return "DATADONE"; + case in_msgin: + return "MSGIN"; + case in_msgincont: + return "MSGINCONT"; + case in_msgindone: + return "MSGINDONE"; + case in_msgout: + return "MSGOUT"; + case in_msgoutdone: + return "MSGOUTDONE"; + case in_cmdbegin: + return "CMDBEGIN"; + case in_cmdend: + return "CMDEND"; + case in_status: + return "STATUS"; + case in_freeing: + return "FREEING"; + case in_the_dark: + return "CLUELESS"; + case in_abortone: + return "ABORTONE"; + case in_abortall: + return "ABORTALL"; + case in_resetdev: + return "RESETDEV"; + case in_resetbus: + return "RESETBUS"; + case in_tgterror: + return "TGTERROR"; + default: + return "UNKNOWN"; + }; +} + +#ifdef DEBUG_STATE_MACHINE +static inline void esp_advance_phase(struct scsi_cmnd *s, int newphase) +{ + ESPLOG(("<%s>", phase_string(newphase))); + s->SCp.sent_command = s->SCp.phase; + s->SCp.phase = newphase; +} +#else +#define esp_advance_phase(__s, __newphase) \ + (__s)->SCp.sent_command = (__s)->SCp.phase; \ + (__s)->SCp.phase = (__newphase); +#endif + +#ifdef DEBUG_ESP_CMDS +static inline void esp_cmd(struct esp *esp, u8 cmd) +{ + esp->espcmdlog[esp->espcmdent] = cmd; + esp->espcmdent = (esp->espcmdent + 1) & 31; + sbus_writeb(cmd, esp->eregs + ESP_CMD); +} +#else +#define esp_cmd(__esp, __cmd) \ + sbus_writeb((__cmd), ((__esp)->eregs) + ESP_CMD) +#endif + +#define ESP_INTSOFF(__dregs) \ + sbus_writel(sbus_readl((__dregs)+DMA_CSR)&~(DMA_INT_ENAB), (__dregs)+DMA_CSR) +#define ESP_INTSON(__dregs) \ + sbus_writel(sbus_readl((__dregs)+DMA_CSR)|DMA_INT_ENAB, (__dregs)+DMA_CSR) +#define ESP_IRQ_P(__dregs) \ + (sbus_readl((__dregs)+DMA_CSR) & (DMA_HNDL_INTR|DMA_HNDL_ERROR)) + +/* How we use the various Linux SCSI data structures for operation. + * + * struct scsi_cmnd: + * + * We keep track of the synchronous capabilities of a target + * in the device member, using sync_min_period and + * sync_max_offset. These are the values we directly write + * into the ESP registers while running a command. If offset + * is zero the ESP will use asynchronous transfers. + * If the borken flag is set we assume we shouldn't even bother + * trying to negotiate for synchronous transfer as this target + * is really stupid. If we notice the target is dropping the + * bus, and we have been allowing it to disconnect, we clear + * the disconnect flag. + */ + + +/* Manipulation of the ESP command queues. Thanks to the aha152x driver + * and its author, Juergen E. Fischer, for the methods used here. + * Note that these are per-ESP queues, not global queues like + * the aha152x driver uses. + */ +static inline void append_SC(struct scsi_cmnd **SC, struct scsi_cmnd *new_SC) +{ + struct scsi_cmnd *end; + + new_SC->host_scribble = (unsigned char *) NULL; + if (!*SC) + *SC = new_SC; + else { + for (end=*SC;end->host_scribble;end=(struct scsi_cmnd *)end->host_scribble) + ; + end->host_scribble = (unsigned char *) new_SC; + } +} + +static inline void prepend_SC(struct scsi_cmnd **SC, struct scsi_cmnd *new_SC) +{ + new_SC->host_scribble = (unsigned char *) *SC; + *SC = new_SC; +} + +static inline struct scsi_cmnd *remove_first_SC(struct scsi_cmnd **SC) +{ + struct scsi_cmnd *ptr; + ptr = *SC; + if (ptr) + *SC = (struct scsi_cmnd *) (*SC)->host_scribble; + return ptr; +} + +static inline struct scsi_cmnd *remove_SC(struct scsi_cmnd **SC, int target, int lun) +{ + struct scsi_cmnd *ptr, *prev; + + for (ptr = *SC, prev = NULL; + ptr && ((ptr->device->id != target) || (ptr->device->lun != lun)); + prev = ptr, ptr = (struct scsi_cmnd *) ptr->host_scribble) + ; + if (ptr) { + if (prev) + prev->host_scribble=ptr->host_scribble; + else + *SC=(struct scsi_cmnd *)ptr->host_scribble; + } + return ptr; +} + +/* Resetting various pieces of the ESP scsi driver chipset/buses. */ +static void esp_reset_dma(struct esp *esp) +{ + int can_do_burst16, can_do_burst32, can_do_burst64; + int can_do_sbus64; + u32 tmp; + + can_do_burst16 = (esp->bursts & DMA_BURST16) != 0; + can_do_burst32 = (esp->bursts & DMA_BURST32) != 0; + can_do_burst64 = 0; + can_do_sbus64 = 0; + if (sbus_can_dma_64bit(esp->sdev)) + can_do_sbus64 = 1; + if (sbus_can_burst64(esp->sdev)) + can_do_burst64 = (esp->bursts & DMA_BURST64) != 0; + + /* Punt the DVMA into a known state. */ + if (esp->dma->revision != dvmahme) { + tmp = sbus_readl(esp->dregs + DMA_CSR); + sbus_writel(tmp | DMA_RST_SCSI, esp->dregs + DMA_CSR); + sbus_writel(tmp & ~DMA_RST_SCSI, esp->dregs + DMA_CSR); + } + switch (esp->dma->revision) { + case dvmahme: + /* This is the HME DVMA gate array. */ + + sbus_writel(DMA_RESET_FAS366, esp->dregs + DMA_CSR); + sbus_writel(DMA_RST_SCSI, esp->dregs + DMA_CSR); + + esp->prev_hme_dmacsr = (DMA_PARITY_OFF|DMA_2CLKS|DMA_SCSI_DISAB|DMA_INT_ENAB); + esp->prev_hme_dmacsr &= ~(DMA_ENABLE|DMA_ST_WRITE|DMA_BRST_SZ); + + if (can_do_burst64) + esp->prev_hme_dmacsr |= DMA_BRST64; + else if (can_do_burst32) + esp->prev_hme_dmacsr |= DMA_BRST32; + + if (can_do_sbus64) { + esp->prev_hme_dmacsr |= DMA_SCSI_SBUS64; + sbus_set_sbus64(esp->sdev, esp->bursts); + } + + /* This chip is horrible. */ + while (sbus_readl(esp->dregs + DMA_CSR) & DMA_PEND_READ) + udelay(1); + + sbus_writel(0, esp->dregs + DMA_CSR); + sbus_writel(esp->prev_hme_dmacsr, esp->dregs + DMA_CSR); + + /* This is necessary to avoid having the SCSI channel + * engine lock up on us. + */ + sbus_writel(0, esp->dregs + DMA_ADDR); + + break; + case dvmarev2: + /* This is the gate array found in the sun4m + * NCR SBUS I/O subsystem. + */ + if (esp->erev != esp100) { + tmp = sbus_readl(esp->dregs + DMA_CSR); + sbus_writel(tmp | DMA_3CLKS, esp->dregs + DMA_CSR); + } + break; + case dvmarev3: + tmp = sbus_readl(esp->dregs + DMA_CSR); + tmp &= ~DMA_3CLKS; + tmp |= DMA_2CLKS; + if (can_do_burst32) { + tmp &= ~DMA_BRST_SZ; + tmp |= DMA_BRST32; + } + sbus_writel(tmp, esp->dregs + DMA_CSR); + break; + case dvmaesc1: + /* This is the DMA unit found on SCSI/Ether cards. */ + tmp = sbus_readl(esp->dregs + DMA_CSR); + tmp |= DMA_ADD_ENABLE; + tmp &= ~DMA_BCNT_ENAB; + if (!can_do_burst32 && can_do_burst16) { + tmp |= DMA_ESC_BURST; + } else { + tmp &= ~(DMA_ESC_BURST); + } + sbus_writel(tmp, esp->dregs + DMA_CSR); + break; + default: + break; + }; + ESP_INTSON(esp->dregs); +} + +/* Reset the ESP chip, _not_ the SCSI bus. */ +static void __init esp_reset_esp(struct esp *esp) +{ + u8 family_code, version; + int i; + + /* Now reset the ESP chip */ + esp_cmd(esp, ESP_CMD_RC); + esp_cmd(esp, ESP_CMD_NULL | ESP_CMD_DMA); + esp_cmd(esp, ESP_CMD_NULL | ESP_CMD_DMA); + + /* Reload the configuration registers */ + sbus_writeb(esp->cfact, esp->eregs + ESP_CFACT); + esp->prev_stp = 0; + sbus_writeb(esp->prev_stp, esp->eregs + ESP_STP); + esp->prev_soff = 0; + sbus_writeb(esp->prev_soff, esp->eregs + ESP_SOFF); + sbus_writeb(esp->neg_defp, esp->eregs + ESP_TIMEO); + + /* This is the only point at which it is reliable to read + * the ID-code for a fast ESP chip variants. + */ + esp->max_period = ((35 * esp->ccycle) / 1000); + if (esp->erev == fast) { + version = sbus_readb(esp->eregs + ESP_UID); + family_code = (version & 0xf8) >> 3; + if (family_code == 0x02) + esp->erev = fas236; + else if (family_code == 0x0a) + esp->erev = fashme; /* Version is usually '5'. */ + else + esp->erev = fas100a; + ESPMISC(("esp%d: FAST chip is %s (family=%d, version=%d)\n", + esp->esp_id, + (esp->erev == fas236) ? "fas236" : + ((esp->erev == fas100a) ? "fas100a" : + "fasHME"), family_code, (version & 7))); + + esp->min_period = ((4 * esp->ccycle) / 1000); + } else { + esp->min_period = ((5 * esp->ccycle) / 1000); + } + esp->max_period = (esp->max_period + 3)>>2; + esp->min_period = (esp->min_period + 3)>>2; + + sbus_writeb(esp->config1, esp->eregs + ESP_CFG1); + switch (esp->erev) { + case esp100: + /* nothing to do */ + break; + case esp100a: + sbus_writeb(esp->config2, esp->eregs + ESP_CFG2); + break; + case esp236: + /* Slow 236 */ + sbus_writeb(esp->config2, esp->eregs + ESP_CFG2); + esp->prev_cfg3 = esp->config3[0]; + sbus_writeb(esp->prev_cfg3, esp->eregs + ESP_CFG3); + break; + case fashme: + esp->config2 |= (ESP_CONFIG2_HME32 | ESP_CONFIG2_HMEFENAB); + /* fallthrough... */ + case fas236: + /* Fast 236 or HME */ + sbus_writeb(esp->config2, esp->eregs + ESP_CFG2); + for (i = 0; i < 16; i++) { + if (esp->erev == fashme) { + u8 cfg3; + + cfg3 = ESP_CONFIG3_FCLOCK | ESP_CONFIG3_OBPUSH; + if (esp->scsi_id >= 8) + cfg3 |= ESP_CONFIG3_IDBIT3; + esp->config3[i] |= cfg3; + } else { + esp->config3[i] |= ESP_CONFIG3_FCLK; + } + } + esp->prev_cfg3 = esp->config3[0]; + sbus_writeb(esp->prev_cfg3, esp->eregs + ESP_CFG3); + if (esp->erev == fashme) { + esp->radelay = 80; + } else { + if (esp->diff) + esp->radelay = 0; + else + esp->radelay = 96; + } + break; + case fas100a: + /* Fast 100a */ + sbus_writeb(esp->config2, esp->eregs + ESP_CFG2); + for (i = 0; i < 16; i++) + esp->config3[i] |= ESP_CONFIG3_FCLOCK; + esp->prev_cfg3 = esp->config3[0]; + sbus_writeb(esp->prev_cfg3, esp->eregs + ESP_CFG3); + esp->radelay = 32; + break; + default: + panic("esp: what could it be... I wonder..."); + break; + }; + + /* Eat any bitrot in the chip */ + sbus_readb(esp->eregs + ESP_INTRPT); + udelay(100); +} + +/* This places the ESP into a known state at boot time. */ +static void __init esp_bootup_reset(struct esp *esp) +{ + u8 tmp; + + /* Reset the DMA */ + esp_reset_dma(esp); + + /* Reset the ESP */ + esp_reset_esp(esp); + + /* Reset the SCSI bus, but tell ESP not to generate an irq */ + tmp = sbus_readb(esp->eregs + ESP_CFG1); + tmp |= ESP_CONFIG1_SRRDISAB; + sbus_writeb(tmp, esp->eregs + ESP_CFG1); + + esp_cmd(esp, ESP_CMD_RS); + udelay(400); + + sbus_writeb(esp->config1, esp->eregs + ESP_CFG1); + + /* Eat any bitrot in the chip and we are done... */ + sbus_readb(esp->eregs + ESP_INTRPT); +} + +static void esp_chain_add(struct esp *esp) +{ + spin_lock_irq(&espchain_lock); + if (espchain) { + struct esp *elink = espchain; + while (elink->next) + elink = elink->next; + elink->next = esp; + } else { + espchain = esp; + } + esp->next = NULL; + spin_unlock_irq(&espchain_lock); +} + +static void esp_chain_del(struct esp *esp) +{ + spin_lock_irq(&espchain_lock); + if (espchain == esp) { + espchain = esp->next; + } else { + struct esp *elink = espchain; + while (elink->next != esp) + elink = elink->next; + elink->next = esp->next; + } + esp->next = NULL; + spin_unlock_irq(&espchain_lock); +} + +static int __init esp_find_dvma(struct esp *esp, struct sbus_dev *dma_sdev) +{ + struct sbus_dev *sdev = esp->sdev; + struct sbus_dma *dma; + + if (dma_sdev != NULL) { + for_each_dvma(dma) { + if (dma->sdev == dma_sdev) + break; + } + } else { + for_each_dvma(dma) { + /* If allocated already, can't use it. */ + if (dma->allocated) + continue; + + if (dma->sdev == NULL) + break; + + /* If bus + slot are the same and it has the + * correct OBP name, it's ours. + */ + if (sdev->bus == dma->sdev->bus && + sdev->slot == dma->sdev->slot && + (!strcmp(dma->sdev->prom_name, "dma") || + !strcmp(dma->sdev->prom_name, "espdma"))) + break; + } + } + + /* If we don't know how to handle the dvma, + * do not use this device. + */ + if (dma == NULL) { + printk("Cannot find dvma for ESP%d's SCSI\n", esp->esp_id); + return -1; + } + if (dma->allocated) { + printk("esp%d: can't use my espdma\n", esp->esp_id); + return -1; + } + dma->allocated = 1; + esp->dma = dma; + esp->dregs = dma->regs; + + return 0; +} + +static int __init esp_map_regs(struct esp *esp, int hme) +{ + struct sbus_dev *sdev = esp->sdev; + struct resource *res; + + /* On HME, two reg sets exist, first is DVMA, + * second is ESP registers. + */ + if (hme) + res = &sdev->resource[1]; + else + res = &sdev->resource[0]; + + esp->eregs = sbus_ioremap(res, 0, ESP_REG_SIZE, "ESP Registers"); + + if (esp->eregs == 0) + return -1; + return 0; +} + +static int __init esp_map_cmdarea(struct esp *esp) +{ + struct sbus_dev *sdev = esp->sdev; + + esp->esp_command = sbus_alloc_consistent(sdev, 16, + &esp->esp_command_dvma); + if (esp->esp_command == NULL || + esp->esp_command_dvma == 0) + return -1; + return 0; +} + +static int __init esp_register_irq(struct esp *esp) +{ + esp->ehost->irq = esp->irq = esp->sdev->irqs[0]; + + /* We used to try various overly-clever things to + * reduce the interrupt processing overhead on + * sun4c/sun4m when multiple ESP's shared the + * same IRQ. It was too complex and messy to + * sanely maintain. + */ + if (request_irq(esp->ehost->irq, esp_intr, + SA_SHIRQ, "ESP SCSI", esp)) { + printk("esp%d: Cannot acquire irq line\n", + esp->esp_id); + return -1; + } + + printk("esp%d: IRQ %s ", esp->esp_id, + __irq_itoa(esp->ehost->irq)); + + return 0; +} + +static void __init esp_get_scsi_id(struct esp *esp) +{ + struct sbus_dev *sdev = esp->sdev; + + esp->scsi_id = prom_getintdefault(esp->prom_node, + "initiator-id", + -1); + if (esp->scsi_id == -1) + esp->scsi_id = prom_getintdefault(esp->prom_node, + "scsi-initiator-id", + -1); + if (esp->scsi_id == -1) + esp->scsi_id = (sdev->bus == NULL) ? 7 : + prom_getintdefault(sdev->bus->prom_node, + "scsi-initiator-id", + 7); + esp->ehost->this_id = esp->scsi_id; + esp->scsi_id_mask = (1 << esp->scsi_id); + +} + +static void __init esp_get_clock_params(struct esp *esp) +{ + struct sbus_dev *sdev = esp->sdev; + int prom_node = esp->prom_node; + int sbus_prom_node; + unsigned int fmhz; + u8 ccf; + + if (sdev != NULL && sdev->bus != NULL) + sbus_prom_node = sdev->bus->prom_node; + else + sbus_prom_node = 0; + + /* This is getting messy but it has to be done + * correctly or else you get weird behavior all + * over the place. We are trying to basically + * figure out three pieces of information. + * + * a) Clock Conversion Factor + * + * This is a representation of the input + * crystal clock frequency going into the + * ESP on this machine. Any operation whose + * timing is longer than 400ns depends on this + * value being correct. For example, you'll + * get blips for arbitration/selection during + * high load or with multiple targets if this + * is not set correctly. + * + * b) Selection Time-Out + * + * The ESP isn't very bright and will arbitrate + * for the bus and try to select a target + * forever if you let it. This value tells + * the ESP when it has taken too long to + * negotiate and that it should interrupt + * the CPU so we can see what happened. + * The value is computed as follows (from + * NCR/Symbios chip docs). + * + * (Time Out Period) * (Input Clock) + * STO = ---------------------------------- + * (8192) * (Clock Conversion Factor) + * + * You usually want the time out period to be + * around 250ms, I think we'll set it a little + * bit higher to account for fully loaded SCSI + * bus's and slow devices that don't respond so + * quickly to selection attempts. (yeah, I know + * this is out of spec. but there is a lot of + * buggy pieces of firmware out there so bite me) + * + * c) Imperical constants for synchronous offset + * and transfer period register values + * + * This entails the smallest and largest sync + * period we could ever handle on this ESP. + */ + + fmhz = prom_getintdefault(prom_node, "clock-frequency", -1); + if (fmhz == -1) + fmhz = (!sbus_prom_node) ? 0 : + prom_getintdefault(sbus_prom_node, "clock-frequency", -1); + + if (fmhz <= (5000000)) + ccf = 0; + else + ccf = (((5000000 - 1) + (fmhz))/(5000000)); + + if (!ccf || ccf > 8) { + /* If we can't find anything reasonable, + * just assume 20MHZ. This is the clock + * frequency of the older sun4c's where I've + * been unable to find the clock-frequency + * PROM property. All other machines provide + * useful values it seems. + */ + ccf = ESP_CCF_F4; + fmhz = (20000000); + } + + if (ccf == (ESP_CCF_F7 + 1)) + esp->cfact = ESP_CCF_F0; + else if (ccf == ESP_CCF_NEVER) + esp->cfact = ESP_CCF_F2; + else + esp->cfact = ccf; + esp->raw_cfact = ccf; + + esp->cfreq = fmhz; + esp->ccycle = ESP_MHZ_TO_CYCLE(fmhz); + esp->ctick = ESP_TICK(ccf, esp->ccycle); + esp->neg_defp = ESP_NEG_DEFP(fmhz, ccf); + esp->sync_defp = SYNC_DEFP_SLOW; + + printk("SCSI ID %d Clk %dMHz CCYC=%d CCF=%d TOut %d ", + esp->scsi_id, (fmhz / 1000000), + (int)esp->ccycle, (int)ccf, (int) esp->neg_defp); +} + +static void __init esp_get_bursts(struct esp *esp, struct sbus_dev *dma) +{ + struct sbus_dev *sdev = esp->sdev; + u8 bursts; + + bursts = prom_getintdefault(esp->prom_node, "burst-sizes", 0xff); + + if (dma) { + u8 tmp = prom_getintdefault(dma->prom_node, + "burst-sizes", 0xff); + if (tmp != 0xff) + bursts &= tmp; + } + + if (sdev->bus) { + u8 tmp = prom_getintdefault(sdev->bus->prom_node, + "burst-sizes", 0xff); + if (tmp != 0xff) + bursts &= tmp; + } + + if (bursts == 0xff || + (bursts & DMA_BURST16) == 0 || + (bursts & DMA_BURST32) == 0) + bursts = (DMA_BURST32 - 1); + + esp->bursts = bursts; +} + +static void __init esp_get_revision(struct esp *esp) +{ + u8 tmp; + + esp->config1 = (ESP_CONFIG1_PENABLE | (esp->scsi_id & 7)); + esp->config2 = (ESP_CONFIG2_SCSI2ENAB | ESP_CONFIG2_REGPARITY); + sbus_writeb(esp->config2, esp->eregs + ESP_CFG2); + + tmp = sbus_readb(esp->eregs + ESP_CFG2); + tmp &= ~ESP_CONFIG2_MAGIC; + if (tmp != (ESP_CONFIG2_SCSI2ENAB | ESP_CONFIG2_REGPARITY)) { + /* If what we write to cfg2 does not come back, cfg2 + * is not implemented, therefore this must be a plain + * esp100. + */ + esp->erev = esp100; + printk("NCR53C90(esp100)\n"); + } else { + esp->config2 = 0; + esp->prev_cfg3 = esp->config3[0] = 5; + sbus_writeb(esp->config2, esp->eregs + ESP_CFG2); + sbus_writeb(0, esp->eregs + ESP_CFG3); + sbus_writeb(esp->prev_cfg3, esp->eregs + ESP_CFG3); + + tmp = sbus_readb(esp->eregs + ESP_CFG3); + if (tmp != 5) { + /* The cfg2 register is implemented, however + * cfg3 is not, must be esp100a. + */ + esp->erev = esp100a; + printk("NCR53C90A(esp100a)\n"); + } else { + int target; + + for (target = 0; target < 16; target++) + esp->config3[target] = 0; + esp->prev_cfg3 = 0; + sbus_writeb(esp->prev_cfg3, esp->eregs + ESP_CFG3); + + /* All of cfg{1,2,3} implemented, must be one of + * the fas variants, figure out which one. + */ + if (esp->raw_cfact > ESP_CCF_F5) { + esp->erev = fast; + esp->sync_defp = SYNC_DEFP_FAST; + printk("NCR53C9XF(espfast)\n"); + } else { + esp->erev = esp236; + printk("NCR53C9x(esp236)\n"); + } + esp->config2 = 0; + sbus_writeb(esp->config2, esp->eregs + ESP_CFG2); + } + } +} + +static void __init esp_init_swstate(struct esp *esp) +{ + int i; + + /* Command queues... */ + esp->current_SC = NULL; + esp->disconnected_SC = NULL; + esp->issue_SC = NULL; + + /* Target and current command state... */ + esp->targets_present = 0; + esp->resetting_bus = 0; + esp->snip = 0; + + init_waitqueue_head(&esp->reset_queue); + + /* Debugging... */ + for(i = 0; i < 32; i++) + esp->espcmdlog[i] = 0; + esp->espcmdent = 0; + + /* MSG phase state... */ + for(i = 0; i < 16; i++) { + esp->cur_msgout[i] = 0; + esp->cur_msgin[i] = 0; + } + esp->prevmsgout = esp->prevmsgin = 0; + esp->msgout_len = esp->msgin_len = 0; + + /* Clear the one behind caches to hold unmatchable values. */ + esp->prev_soff = esp->prev_stp = esp->prev_cfg3 = 0xff; + esp->prev_hme_dmacsr = 0xffffffff; +} + +static int __init detect_one_esp(struct scsi_host_template *tpnt, struct sbus_dev *esp_dev, + struct sbus_dev *espdma, struct sbus_bus *sbus, + int id, int hme) +{ + struct Scsi_Host *esp_host = scsi_register(tpnt, sizeof(struct esp)); + struct esp *esp; + + if (!esp_host) { + printk("ESP: Cannot register SCSI host\n"); + return -1; + } + if (hme) + esp_host->max_id = 16; + esp = (struct esp *) esp_host->hostdata; + esp->ehost = esp_host; + esp->sdev = esp_dev; + esp->esp_id = id; + esp->prom_node = esp_dev->prom_node; + prom_getstring(esp->prom_node, "name", esp->prom_name, + sizeof(esp->prom_name)); + + esp_chain_add(esp); + if (esp_find_dvma(esp, espdma) < 0) + goto fail_unlink; + if (esp_map_regs(esp, hme) < 0) { + printk("ESP registers unmappable"); + goto fail_dvma_release; + } + if (esp_map_cmdarea(esp) < 0) { + printk("ESP DVMA transport area unmappable"); + goto fail_unmap_regs; + } + if (esp_register_irq(esp) < 0) + goto fail_unmap_cmdarea; + + esp_get_scsi_id(esp); + + esp->diff = prom_getbool(esp->prom_node, "differential"); + if (esp->diff) + printk("Differential "); + + esp_get_clock_params(esp); + esp_get_bursts(esp, espdma); + esp_get_revision(esp); + esp_init_swstate(esp); + + esp_bootup_reset(esp); + + return 0; + +fail_unmap_cmdarea: + sbus_free_consistent(esp->sdev, 16, + (void *) esp->esp_command, + esp->esp_command_dvma); + +fail_unmap_regs: + sbus_iounmap(esp->eregs, ESP_REG_SIZE); + +fail_dvma_release: + esp->dma->allocated = 0; + +fail_unlink: + esp_chain_del(esp); + scsi_unregister(esp_host); + return -1; +} + +/* Detecting ESP chips on the machine. This is the simple and easy + * version. + */ + +#ifdef CONFIG_SUN4 + +#include <asm/sun4paddr.h> + +static int __init esp_detect(struct scsi_host_template *tpnt) +{ + static struct sbus_dev esp_dev; + int esps_in_use = 0; + + espchain = 0; + + if (sun4_esp_physaddr) { + memset (&esp_dev, 0, sizeof(esp_dev)); + esp_dev.reg_addrs[0].phys_addr = sun4_esp_physaddr; + esp_dev.irqs[0] = 4; + esp_dev.resource[0].start = sun4_esp_physaddr; + esp_dev.resource[0].end = sun4_esp_physaddr + ESP_REG_SIZE - 1; + esp_dev.resource[0].flags = IORESOURCE_IO; + + if (!detect_one_esp(tpnt, &esp_dev, NULL, NULL, 0, 0)) + esps_in_use++; + printk("ESP: Total of 1 ESP hosts found, %d actually in use.\n", esps_in_use); + esps_running = esps_in_use; + } + return esps_in_use; +} + +#else /* !CONFIG_SUN4 */ + +static int __init esp_detect(struct scsi_host_template *tpnt) +{ + struct sbus_bus *sbus; + struct sbus_dev *esp_dev, *sbdev_iter; + int nesps = 0, esps_in_use = 0; + + espchain = 0; + if (!sbus_root) { +#ifdef CONFIG_PCI + return 0; +#else + panic("No SBUS in esp_detect()"); +#endif + } + for_each_sbus(sbus) { + for_each_sbusdev(sbdev_iter, sbus) { + struct sbus_dev *espdma = NULL; + int hme = 0; + + /* Is it an esp sbus device? */ + esp_dev = sbdev_iter; + if (strcmp(esp_dev->prom_name, "esp") && + strcmp(esp_dev->prom_name, "SUNW,esp")) { + if (!strcmp(esp_dev->prom_name, "SUNW,fas")) { + hme = 1; + espdma = esp_dev; + } else { + if (!esp_dev->child || + (strcmp(esp_dev->prom_name, "espdma") && + strcmp(esp_dev->prom_name, "dma"))) + continue; /* nope... */ + espdma = esp_dev; + esp_dev = esp_dev->child; + if (strcmp(esp_dev->prom_name, "esp") && + strcmp(esp_dev->prom_name, "SUNW,esp")) + continue; /* how can this happen? */ + } + } + + if (detect_one_esp(tpnt, esp_dev, espdma, sbus, nesps++, hme) < 0) + continue; + + esps_in_use++; + } /* for each sbusdev */ + } /* for each sbus */ + printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps, + esps_in_use); + esps_running = esps_in_use; + return esps_in_use; +} + +#endif /* !CONFIG_SUN4 */ + +/* + */ +static int esp_release(struct Scsi_Host *host) +{ + struct esp *esp = (struct esp *) host->hostdata; + + ESP_INTSOFF(esp->dregs); +#if 0 + esp_reset_dma(esp); + esp_reset_esp(esp); +#endif + + free_irq(esp->ehost->irq, esp); + sbus_free_consistent(esp->sdev, 16, + (void *) esp->esp_command, esp->esp_command_dvma); + sbus_iounmap(esp->eregs, ESP_REG_SIZE); + esp->dma->allocated = 0; + esp_chain_del(esp); + + return 0; +} + +/* The info function will return whatever useful + * information the developer sees fit. If not provided, then + * the name field will be used instead. + */ +static const char *esp_info(struct Scsi_Host *host) +{ + struct esp *esp; + + esp = (struct esp *) host->hostdata; + switch (esp->erev) { + case esp100: + return "Sparc ESP100 (NCR53C90)"; + case esp100a: + return "Sparc ESP100A (NCR53C90A)"; + case esp236: + return "Sparc ESP236"; + case fas236: + return "Sparc ESP236-FAST"; + case fashme: + return "Sparc ESP366-HME"; + case fas100a: + return "Sparc ESP100A-FAST"; + default: + return "Bogon ESP revision"; + }; +} + +/* From Wolfgang Stanglmeier's NCR scsi driver. */ +struct info_str +{ + char *buffer; + int length; + int offset; + int pos; +}; + +static void copy_mem_info(struct info_str *info, char *data, int len) +{ + if (info->pos + len > info->length) + len = info->length - info->pos; + + if (info->pos + len < info->offset) { + info->pos += len; + return; + } + if (info->pos < info->offset) { + data += (info->offset - info->pos); + len -= (info->offset - info->pos); + } + + if (len > 0) { + memcpy(info->buffer + info->pos, data, len); + info->pos += len; + } +} + +static int copy_info(struct info_str *info, char *fmt, ...) +{ + va_list args; + char buf[81]; + int len; + + va_start(args, fmt); + len = vsprintf(buf, fmt, args); + va_end(args); + + copy_mem_info(info, buf, len); + return len; +} + +static int esp_host_info(struct esp *esp, char *ptr, off_t offset, int len) +{ + struct scsi_device *sdev; + struct info_str info; + int i; + + info.buffer = ptr; + info.length = len; + info.offset = offset; + info.pos = 0; + + copy_info(&info, "Sparc ESP Host Adapter:\n"); + copy_info(&info, "\tPROM node\t\t%08x\n", (unsigned int) esp->prom_node); + copy_info(&info, "\tPROM name\t\t%s\n", esp->prom_name); + copy_info(&info, "\tESP Model\t\t"); + switch (esp->erev) { + case esp100: + copy_info(&info, "ESP100\n"); + break; + case esp100a: + copy_info(&info, "ESP100A\n"); + break; + case esp236: + copy_info(&info, "ESP236\n"); + break; + case fas236: + copy_info(&info, "FAS236\n"); + break; + case fas100a: + copy_info(&info, "FAS100A\n"); + break; + case fast: + copy_info(&info, "FAST\n"); + break; + case fashme: + copy_info(&info, "Happy Meal FAS\n"); + break; + case espunknown: + default: + copy_info(&info, "Unknown!\n"); + break; + }; + copy_info(&info, "\tDMA Revision\t\t"); + switch (esp->dma->revision) { + case dvmarev0: + copy_info(&info, "Rev 0\n"); + break; + case dvmaesc1: + copy_info(&info, "ESC Rev 1\n"); + break; + case dvmarev1: + copy_info(&info, "Rev 1\n"); + break; + case dvmarev2: + copy_info(&info, "Rev 2\n"); + break; + case dvmarev3: + copy_info(&info, "Rev 3\n"); + break; + case dvmarevplus: + copy_info(&info, "Rev 1+\n"); + break; + case dvmahme: + copy_info(&info, "Rev HME/FAS\n"); + break; + default: + copy_info(&info, "Unknown!\n"); + break; + }; + copy_info(&info, "\tLive Targets\t\t[ "); + for (i = 0; i < 15; i++) { + if (esp->targets_present & (1 << i)) + copy_info(&info, "%d ", i); + } + copy_info(&info, "]\n\n"); + + /* Now describe the state of each existing target. */ + copy_info(&info, "Target #\tconfig3\t\tSync Capabilities\tDisconnect\tWide\n"); + + shost_for_each_device(sdev, esp->ehost) { + struct esp_device *esp_dev = sdev->hostdata; + uint id = sdev->id; + + if (!(esp->targets_present & (1 << id))) + continue; + + copy_info(&info, "%d\t\t", id); + copy_info(&info, "%08lx\t", esp->config3[id]); + copy_info(&info, "[%02lx,%02lx]\t\t\t", + esp_dev->sync_max_offset, + esp_dev->sync_min_period); + copy_info(&info, "%s\t\t", + esp_dev->disconnect ? "yes" : "no"); + copy_info(&info, "%s\n", + (esp->config3[id] & ESP_CONFIG3_EWIDE) ? "yes" : "no"); + } + return info.pos > info.offset? info.pos - info.offset : 0; +} + +/* ESP proc filesystem code. */ +static int esp_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset, + int length, int inout) +{ + struct esp *esp; + + if (inout) + return -EINVAL; /* not yet */ + + for_each_esp(esp) { + if (esp->ehost == host) + break; + } + if (!esp) + return -EINVAL; + + if (start) + *start = buffer; + + return esp_host_info(esp, buffer, offset, length); +} + +static void esp_get_dmabufs(struct esp *esp, struct scsi_cmnd *sp) +{ + if (sp->use_sg == 0) { + sp->SCp.this_residual = sp->request_bufflen; + sp->SCp.buffer = (struct scatterlist *) sp->request_buffer; + sp->SCp.buffers_residual = 0; + if (sp->request_bufflen) { + sp->SCp.have_data_in = sbus_map_single(esp->sdev, sp->SCp.buffer, + sp->SCp.this_residual, + sp->sc_data_direction); + sp->SCp.ptr = (char *) ((unsigned long)sp->SCp.have_data_in); + } else { + sp->SCp.ptr = NULL; + } + } else { + sp->SCp.buffer = (struct scatterlist *) sp->buffer; + sp->SCp.buffers_residual = sbus_map_sg(esp->sdev, + sp->SCp.buffer, + sp->use_sg, + sp->sc_data_direction); + sp->SCp.this_residual = sg_dma_len(sp->SCp.buffer); + sp->SCp.ptr = (char *) ((unsigned long)sg_dma_address(sp->SCp.buffer)); + } +} + +static void esp_release_dmabufs(struct esp *esp, struct scsi_cmnd *sp) +{ + if (sp->use_sg) { + sbus_unmap_sg(esp->sdev, sp->buffer, sp->use_sg, + sp->sc_data_direction); + } else if (sp->request_bufflen) { + sbus_unmap_single(esp->sdev, + sp->SCp.have_data_in, + sp->request_bufflen, + sp->sc_data_direction); + } +} + +static void esp_restore_pointers(struct esp *esp, struct scsi_cmnd *sp) +{ + struct esp_pointers *ep = &esp->data_pointers[sp->device->id]; + + sp->SCp.ptr = ep->saved_ptr; + sp->SCp.buffer = ep->saved_buffer; + sp->SCp.this_residual = ep->saved_this_residual; + sp->SCp.buffers_residual = ep->saved_buffers_residual; +} + +static void esp_save_pointers(struct esp *esp, struct scsi_cmnd *sp) +{ + struct esp_pointers *ep = &esp->data_pointers[sp->device->id]; + + ep->saved_ptr = sp->SCp.ptr; + ep->saved_buffer = sp->SCp.buffer; + ep->saved_this_residual = sp->SCp.this_residual; + ep->saved_buffers_residual = sp->SCp.buffers_residual; +} + +/* Some rules: + * + * 1) Never ever panic while something is live on the bus. + * If there is to be any chance of syncing the disks this + * rule is to be obeyed. + * + * 2) Any target that causes a foul condition will no longer + * have synchronous transfers done to it, no questions + * asked. + * + * 3) Keep register accesses to a minimum. Think about some + * day when we have Xbus machines this is running on and + * the ESP chip is on the other end of the machine on a + * different board from the cpu where this is running. + */ + +/* Fire off a command. We assume the bus is free and that the only + * case where we could see an interrupt is where we have disconnected + * commands active and they are trying to reselect us. + */ +static inline void esp_check_cmd(struct esp *esp, struct scsi_cmnd *sp) +{ + switch (sp->cmd_len) { + case 6: + case 10: + case 12: + esp->esp_slowcmd = 0; + break; + + default: + esp->esp_slowcmd = 1; + esp->esp_scmdleft = sp->cmd_len; + esp->esp_scmdp = &sp->cmnd[0]; + break; + }; +} + +static inline void build_sync_nego_msg(struct esp *esp, int period, int offset) +{ + esp->cur_msgout[0] = EXTENDED_MESSAGE; + esp->cur_msgout[1] = 3; + esp->cur_msgout[2] = EXTENDED_SDTR; + esp->cur_msgout[3] = period; + esp->cur_msgout[4] = offset; + esp->msgout_len = 5; +} + +/* SIZE is in bits, currently HME only supports 16 bit wide transfers. */ +static inline void build_wide_nego_msg(struct esp *esp, int size) +{ + esp->cur_msgout[0] = EXTENDED_MESSAGE; + esp->cur_msgout[1] = 2; + esp->cur_msgout[2] = EXTENDED_WDTR; + switch (size) { + case 32: + esp->cur_msgout[3] = 2; + break; + case 16: + esp->cur_msgout[3] = 1; + break; + case 8: + default: + esp->cur_msgout[3] = 0; + break; + }; + + esp->msgout_len = 4; +} + +static void esp_exec_cmd(struct esp *esp) +{ + struct scsi_cmnd *SCptr; + struct scsi_device *SDptr; + struct esp_device *esp_dev; + volatile u8 *cmdp = esp->esp_command; + u8 the_esp_command; + int lun, target; + int i; + + /* Hold off if we have disconnected commands and + * an IRQ is showing... + */ + if (esp->disconnected_SC && ESP_IRQ_P(esp->dregs)) + return; + + /* Grab first member of the issue queue. */ + SCptr = esp->current_SC = remove_first_SC(&esp->issue_SC); + + /* Safe to panic here because current_SC is null. */ + if (!SCptr) + panic("esp: esp_exec_cmd and issue queue is NULL"); + + SDptr = SCptr->device; + esp_dev = SDptr->hostdata; + lun = SCptr->device->lun; + target = SCptr->device->id; + + esp->snip = 0; + esp->msgout_len = 0; + + /* Send it out whole, or piece by piece? The ESP + * only knows how to automatically send out 6, 10, + * and 12 byte commands. I used to think that the + * Linux SCSI code would never throw anything other + * than that to us, but then again there is the + * SCSI generic driver which can send us anything. + */ + esp_check_cmd(esp, SCptr); + + /* If arbitration/selection is successful, the ESP will leave + * ATN asserted, causing the target to go into message out + * phase. The ESP will feed the target the identify and then + * the target can only legally go to one of command, + * datain/out, status, or message in phase, or stay in message + * out phase (should we be trying to send a sync negotiation + * message after the identify). It is not allowed to drop + * BSY, but some buggy targets do and we check for this + * condition in the selection complete code. Most of the time + * we'll make the command bytes available to the ESP and it + * will not interrupt us until it finishes command phase, we + * cannot do this for command sizes the ESP does not + * understand and in this case we'll get interrupted right + * when the target goes into command phase. + * + * It is absolutely _illegal_ in the presence of SCSI-2 devices + * to use the ESP select w/o ATN command. When SCSI-2 devices are + * present on the bus we _must_ always go straight to message out + * phase with an identify message for the target. Being that + * selection attempts in SCSI-1 w/o ATN was an option, doing SCSI-2 + * selections should not confuse SCSI-1 we hope. + */ + + if (esp_dev->sync) { + /* this targets sync is known */ +#ifndef __sparc_v9__ +do_sync_known: +#endif + if (esp_dev->disconnect) + *cmdp++ = IDENTIFY(1, lun); + else + *cmdp++ = IDENTIFY(0, lun); + + if (esp->esp_slowcmd) { + the_esp_command = (ESP_CMD_SELAS | ESP_CMD_DMA); + esp_advance_phase(SCptr, in_slct_stop); + } else { + the_esp_command = (ESP_CMD_SELA | ESP_CMD_DMA); + esp_advance_phase(SCptr, in_slct_norm); + } + } else if (!(esp->targets_present & (1<<target)) || !(esp_dev->disconnect)) { + /* After the bootup SCSI code sends both the + * TEST_UNIT_READY and INQUIRY commands we want + * to at least attempt allowing the device to + * disconnect. + */ + ESPMISC(("esp: Selecting device for first time. target=%d " + "lun=%d\n", target, SCptr->device->lun)); + if (!SDptr->borken && !esp_dev->disconnect) + esp_dev->disconnect = 1; + + *cmdp++ = IDENTIFY(0, lun); + esp->prevmsgout = NOP; + esp_advance_phase(SCptr, in_slct_norm); + the_esp_command = (ESP_CMD_SELA | ESP_CMD_DMA); + + /* Take no chances... */ + esp_dev->sync_max_offset = 0; + esp_dev->sync_min_period = 0; + } else { + /* Sorry, I have had way too many problems with + * various CDROM devices on ESP. -DaveM + */ + int cdrom_hwbug_wkaround = 0; + +#ifndef __sparc_v9__ + /* Never allow disconnects or synchronous transfers on + * SparcStation1 and SparcStation1+. Allowing those + * to be enabled seems to lockup the machine completely. + */ + if ((idprom->id_machtype == (SM_SUN4C | SM_4C_SS1)) || + (idprom->id_machtype == (SM_SUN4C | SM_4C_SS1PLUS))) { + /* But we are nice and allow tapes and removable + * disks (but not CDROMs) to disconnect. + */ + if(SDptr->type == TYPE_TAPE || + (SDptr->type != TYPE_ROM && SDptr->removable)) + esp_dev->disconnect = 1; + else + esp_dev->disconnect = 0; + esp_dev->sync_max_offset = 0; + esp_dev->sync_min_period = 0; + esp_dev->sync = 1; + esp->snip = 0; + goto do_sync_known; + } +#endif /* !(__sparc_v9__) */ + + /* We've talked to this guy before, + * but never negotiated. Let's try, + * need to attempt WIDE first, before + * sync nego, as per SCSI 2 standard. + */ + if (esp->erev == fashme && !esp_dev->wide) { + if (!SDptr->borken && + SDptr->type != TYPE_ROM && + SDptr->removable == 0) { + build_wide_nego_msg(esp, 16); + esp_dev->wide = 1; + esp->wnip = 1; + goto after_nego_msg_built; + } else { + esp_dev->wide = 1; + /* Fall through and try sync. */ + } + } + + if (!SDptr->borken) { + if ((SDptr->type == TYPE_ROM)) { + /* Nice try sucker... */ + ESPMISC(("esp%d: Disabling sync for buggy " + "CDROM.\n", esp->esp_id)); + cdrom_hwbug_wkaround = 1; + build_sync_nego_msg(esp, 0, 0); + } else if (SDptr->removable != 0) { + ESPMISC(("esp%d: Not negotiating sync/wide but " + "allowing disconnect for removable media.\n", + esp->esp_id)); + build_sync_nego_msg(esp, 0, 0); + } else { + build_sync_nego_msg(esp, esp->sync_defp, 15); + } + } else { + build_sync_nego_msg(esp, 0, 0); + } + esp_dev->sync = 1; + esp->snip = 1; + +after_nego_msg_built: + /* A fix for broken SCSI1 targets, when they disconnect + * they lock up the bus and confuse ESP. So disallow + * disconnects for SCSI1 targets for now until we + * find a better fix. + * + * Addendum: This is funny, I figured out what was going + * on. The blotzed SCSI1 target would disconnect, + * one of the other SCSI2 targets or both would be + * disconnected as well. The SCSI1 target would + * stay disconnected long enough that we start + * up a command on one of the SCSI2 targets. As + * the ESP is arbitrating for the bus the SCSI1 + * target begins to arbitrate as well to reselect + * the ESP. The SCSI1 target refuses to drop it's + * ID bit on the data bus even though the ESP is + * at ID 7 and is the obvious winner for any + * arbitration. The ESP is a poor sport and refuses + * to lose arbitration, it will continue indefinitely + * trying to arbitrate for the bus and can only be + * stopped via a chip reset or SCSI bus reset. + * Therefore _no_ disconnects for SCSI1 targets + * thank you very much. ;-) + */ + if(((SDptr->scsi_level < 3) && + (SDptr->type != TYPE_TAPE) && + SDptr->removable == 0) || + cdrom_hwbug_wkaround || SDptr->borken) { + ESPMISC((KERN_INFO "esp%d: Disabling DISCONNECT for target %d " + "lun %d\n", esp->esp_id, SCptr->device->id, SCptr->device->lun)); + esp_dev->disconnect = 0; + *cmdp++ = IDENTIFY(0, lun); + } else { + *cmdp++ = IDENTIFY(1, lun); + } + + /* ESP fifo is only so big... + * Make this look like a slow command. + */ + esp->esp_slowcmd = 1; + esp->esp_scmdleft = SCptr->cmd_len; + esp->esp_scmdp = &SCptr->cmnd[0]; + + the_esp_command = (ESP_CMD_SELAS | ESP_CMD_DMA); + esp_advance_phase(SCptr, in_slct_msg); + } + + if (!esp->esp_slowcmd) + for (i = 0; i < SCptr->cmd_len; i++) + *cmdp++ = SCptr->cmnd[i]; + + /* HME sucks... */ + if (esp->erev == fashme) + sbus_writeb((target & 0xf) | (ESP_BUSID_RESELID | ESP_BUSID_CTR32BIT), + esp->eregs + ESP_BUSID); + else + sbus_writeb(target & 7, esp->eregs + ESP_BUSID); + if (esp->prev_soff != esp_dev->sync_max_offset || + esp->prev_stp != esp_dev->sync_min_period || + (esp->erev > esp100a && + esp->prev_cfg3 != esp->config3[target])) { + esp->prev_soff = esp_dev->sync_max_offset; + esp->prev_stp = esp_dev->sync_min_period; + sbus_writeb(esp->prev_soff, esp->eregs + ESP_SOFF); + sbus_writeb(esp->prev_stp, esp->eregs + ESP_STP); + if (esp->erev > esp100a) { + esp->prev_cfg3 = esp->config3[target]; + sbus_writeb(esp->prev_cfg3, esp->eregs + ESP_CFG3); + } + } + i = (cmdp - esp->esp_command); + + if (esp->erev == fashme) { + esp_cmd(esp, ESP_CMD_FLUSH); /* Grrr! */ + + /* Set up the DMA and HME counters */ + sbus_writeb(i, esp->eregs + ESP_TCLOW); + sbus_writeb(0, esp->eregs + ESP_TCMED); + sbus_writeb(0, esp->eregs + FAS_RLO); + sbus_writeb(0, esp->eregs + FAS_RHI); + esp_cmd(esp, the_esp_command); + + /* Talk about touchy hardware... */ + esp->prev_hme_dmacsr = ((esp->prev_hme_dmacsr | + (DMA_SCSI_DISAB | DMA_ENABLE)) & + ~(DMA_ST_WRITE)); + sbus_writel(16, esp->dregs + DMA_COUNT); + sbus_writel(esp->esp_command_dvma, esp->dregs + DMA_ADDR); + sbus_writel(esp->prev_hme_dmacsr, esp->dregs + DMA_CSR); + } else { + u32 tmp; + + /* Set up the DMA and ESP counters */ + sbus_writeb(i, esp->eregs + ESP_TCLOW); + sbus_writeb(0, esp->eregs + ESP_TCMED); + tmp = sbus_readl(esp->dregs + DMA_CSR); + tmp &= ~DMA_ST_WRITE; + tmp |= DMA_ENABLE; + sbus_writel(tmp, esp->dregs + DMA_CSR); + if (esp->dma->revision == dvmaesc1) { + if (i) /* Workaround ESC gate array SBUS rerun bug. */ + sbus_writel(PAGE_SIZE, esp->dregs + DMA_COUNT); + } + sbus_writel(esp->esp_command_dvma, esp->dregs + DMA_ADDR); + + /* Tell ESP to "go". */ + esp_cmd(esp, the_esp_command); + } +} + +/* Queue a SCSI command delivered from the mid-level Linux SCSI code. */ +static int esp_queue(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) +{ + struct esp *esp; + + /* Set up func ptr and initial driver cmd-phase. */ + SCpnt->scsi_done = done; + SCpnt->SCp.phase = not_issued; + + /* We use the scratch area. */ + ESPQUEUE(("esp_queue: target=%d lun=%d ", SCpnt->device->id, SCpnt->device->lun)); + ESPDISC(("N<%02x,%02x>", SCpnt->device->id, SCpnt->device->lun)); + + esp = (struct esp *) SCpnt->device->host->hostdata; + esp_get_dmabufs(esp, SCpnt); + esp_save_pointers(esp, SCpnt); /* FIXME for tag queueing */ + + SCpnt->SCp.Status = CHECK_CONDITION; + SCpnt->SCp.Message = 0xff; + SCpnt->SCp.sent_command = 0; + + /* Place into our queue. */ + if (SCpnt->cmnd[0] == REQUEST_SENSE) { + ESPQUEUE(("RQSENSE\n")); + prepend_SC(&esp->issue_SC, SCpnt); + } else { + ESPQUEUE(("\n")); + append_SC(&esp->issue_SC, SCpnt); + } + + /* Run it now if we can. */ + if (!esp->current_SC && !esp->resetting_bus) + esp_exec_cmd(esp); + + return 0; +} + +/* Dump driver state. */ +static void esp_dump_cmd(struct scsi_cmnd *SCptr) +{ + ESPLOG(("[tgt<%02x> lun<%02x> " + "pphase<%s> cphase<%s>]", + SCptr->device->id, SCptr->device->lun, + phase_string(SCptr->SCp.sent_command), + phase_string(SCptr->SCp.phase))); +} + +static void esp_dump_state(struct esp *esp) +{ + struct scsi_cmnd *SCptr = esp->current_SC; +#ifdef DEBUG_ESP_CMDS + int i; +#endif + + ESPLOG(("esp%d: dumping state\n", esp->esp_id)); + ESPLOG(("esp%d: dma -- cond_reg<%08x> addr<%08x>\n", + esp->esp_id, + sbus_readl(esp->dregs + DMA_CSR), + sbus_readl(esp->dregs + DMA_ADDR))); + ESPLOG(("esp%d: SW [sreg<%02x> sstep<%02x> ireg<%02x>]\n", + esp->esp_id, esp->sreg, esp->seqreg, esp->ireg)); + ESPLOG(("esp%d: HW reread [sreg<%02x> sstep<%02x> ireg<%02x>]\n", + esp->esp_id, + sbus_readb(esp->eregs + ESP_STATUS), + sbus_readb(esp->eregs + ESP_SSTEP), + sbus_readb(esp->eregs + ESP_INTRPT))); +#ifdef DEBUG_ESP_CMDS + printk("esp%d: last ESP cmds [", esp->esp_id); + i = (esp->espcmdent - 1) & 31; + printk("<"); esp_print_cmd(esp->espcmdlog[i]); printk(">"); + i = (i - 1) & 31; + printk("<"); esp_print_cmd(esp->espcmdlog[i]); printk(">"); + i = (i - 1) & 31; + printk("<"); esp_print_cmd(esp->espcmdlog[i]); printk(">"); + i = (i - 1) & 31; + printk("<"); esp_print_cmd(esp->espcmdlog[i]); printk(">"); + printk("]\n"); +#endif /* (DEBUG_ESP_CMDS) */ + + if (SCptr) { + ESPLOG(("esp%d: current command ", esp->esp_id)); + esp_dump_cmd(SCptr); + } + ESPLOG(("\n")); + SCptr = esp->disconnected_SC; + ESPLOG(("esp%d: disconnected ", esp->esp_id)); + while (SCptr) { + esp_dump_cmd(SCptr); + SCptr = (struct scsi_cmnd *) SCptr->host_scribble; + } + ESPLOG(("\n")); +} + +/* Abort a command. The host_lock is acquired by caller. */ +static int esp_abort(struct scsi_cmnd *SCptr) +{ + struct esp *esp = (struct esp *) SCptr->device->host->hostdata; + int don; + + ESPLOG(("esp%d: Aborting command\n", esp->esp_id)); + esp_dump_state(esp); + + /* Wheee, if this is the current command on the bus, the + * best we can do is assert ATN and wait for msgout phase. + * This should even fix a hung SCSI bus when we lose state + * in the driver and timeout because the eventual phase change + * will cause the ESP to (eventually) give an interrupt. + */ + if (esp->current_SC == SCptr) { + esp->cur_msgout[0] = ABORT; + esp->msgout_len = 1; + esp->msgout_ctr = 0; + esp_cmd(esp, ESP_CMD_SATN); + return SUCCESS; + } + + /* If it is still in the issue queue then we can safely + * call the completion routine and report abort success. + */ + don = (sbus_readl(esp->dregs + DMA_CSR) & DMA_INT_ENAB); + if (don) { + ESP_INTSOFF(esp->dregs); + } + if (esp->issue_SC) { + struct scsi_cmnd **prev, *this; + for (prev = (&esp->issue_SC), this = esp->issue_SC; + this != NULL; + prev = (struct scsi_cmnd **) &(this->host_scribble), + this = (struct scsi_cmnd *) this->host_scribble) { + + if (this == SCptr) { + *prev = (struct scsi_cmnd *) this->host_scribble; + this->host_scribble = NULL; + + esp_release_dmabufs(esp, this); + this->result = DID_ABORT << 16; + this->scsi_done(this); + + if (don) + ESP_INTSON(esp->dregs); + + return SUCCESS; + } + } + } + + /* Yuck, the command to abort is disconnected, it is not + * worth trying to abort it now if something else is live + * on the bus at this time. So, we let the SCSI code wait + * a little bit and try again later. + */ + if (esp->current_SC) { + if (don) + ESP_INTSON(esp->dregs); + return FAILED; + } + + /* It's disconnected, we have to reconnect to re-establish + * the nexus and tell the device to abort. However, we really + * cannot 'reconnect' per se. Don't try to be fancy, just + * indicate failure, which causes our caller to reset the whole + * bus. + */ + + if (don) + ESP_INTSON(esp->dregs); + + return FAILED; +} + +/* We've sent ESP_CMD_RS to the ESP, the interrupt had just + * arrived indicating the end of the SCSI bus reset. Our job + * is to clean out the command queues and begin re-execution + * of SCSI commands once more. + */ +static int esp_finish_reset(struct esp *esp) +{ + struct scsi_cmnd *sp = esp->current_SC; + + /* Clean up currently executing command, if any. */ + if (sp != NULL) { + esp->current_SC = NULL; + + esp_release_dmabufs(esp, sp); + sp->result = (DID_RESET << 16); + + sp->scsi_done(sp); + } + + /* Clean up disconnected queue, they have been invalidated + * by the bus reset. + */ + if (esp->disconnected_SC) { + while ((sp = remove_first_SC(&esp->disconnected_SC)) != NULL) { + esp_release_dmabufs(esp, sp); + sp->result = (DID_RESET << 16); + + sp->scsi_done(sp); + } + } + + /* SCSI bus reset is complete. */ + esp->resetting_bus = 0; + wake_up(&esp->reset_queue); + + /* Ok, now it is safe to get commands going once more. */ + if (esp->issue_SC) + esp_exec_cmd(esp); + + return do_intr_end; +} + +static int esp_do_resetbus(struct esp *esp) +{ + ESPLOG(("esp%d: Resetting scsi bus\n", esp->esp_id)); + esp->resetting_bus = 1; + esp_cmd(esp, ESP_CMD_RS); + + return do_intr_end; +} + +/* Reset ESP chip, reset hanging bus, then kill active and + * disconnected commands for targets without soft reset. + * + * The host_lock is acquired by caller. + */ +static int esp_reset(struct scsi_cmnd *SCptr) +{ + struct esp *esp = (struct esp *) SCptr->device->host->hostdata; + + (void) esp_do_resetbus(esp); + + spin_unlock_irq(esp->ehost->host_lock); + + wait_event(esp->reset_queue, (esp->resetting_bus == 0)); + + spin_lock_irq(esp->ehost->host_lock); + + return SUCCESS; +} + +/* Internal ESP done function. */ +static void esp_done(struct esp *esp, int error) +{ + struct scsi_cmnd *done_SC = esp->current_SC; + + esp->current_SC = NULL; + + esp_release_dmabufs(esp, done_SC); + done_SC->result = error; + + done_SC->scsi_done(done_SC); + + /* Bus is free, issue any commands in the queue. */ + if (esp->issue_SC && !esp->current_SC) + esp_exec_cmd(esp); + +} + +/* Wheee, ESP interrupt engine. */ + +/* Forward declarations. */ +static int esp_do_phase_determine(struct esp *esp); +static int esp_do_data_finale(struct esp *esp); +static int esp_select_complete(struct esp *esp); +static int esp_do_status(struct esp *esp); +static int esp_do_msgin(struct esp *esp); +static int esp_do_msgindone(struct esp *esp); +static int esp_do_msgout(struct esp *esp); +static int esp_do_cmdbegin(struct esp *esp); + +#define sreg_datainp(__sreg) (((__sreg) & ESP_STAT_PMASK) == ESP_DIP) +#define sreg_dataoutp(__sreg) (((__sreg) & ESP_STAT_PMASK) == ESP_DOP) + +/* Read any bytes found in the FAS366 fifo, storing them into + * the ESP driver software state structure. + */ +static void hme_fifo_read(struct esp *esp) +{ + u8 count = 0; + u8 status = esp->sreg; + + /* Cannot safely frob the fifo for these following cases, but + * we must always read the fifo when the reselect interrupt + * is pending. + */ + if (((esp->ireg & ESP_INTR_RSEL) == 0) && + (sreg_datainp(status) || + sreg_dataoutp(status) || + (esp->current_SC && + esp->current_SC->SCp.phase == in_data_done))) { + ESPHME(("<wkaround_skipped>")); + } else { + unsigned long fcnt = sbus_readb(esp->eregs + ESP_FFLAGS) & ESP_FF_FBYTES; + + /* The HME stores bytes in multiples of 2 in the fifo. */ + ESPHME(("hme_fifo[fcnt=%d", (int)fcnt)); + while (fcnt) { + esp->hme_fifo_workaround_buffer[count++] = + sbus_readb(esp->eregs + ESP_FDATA); + esp->hme_fifo_workaround_buffer[count++] = + sbus_readb(esp->eregs + ESP_FDATA); + ESPHME(("<%02x,%02x>", esp->hme_fifo_workaround_buffer[count-2], esp->hme_fifo_workaround_buffer[count-1])); + fcnt--; + } + if (sbus_readb(esp->eregs + ESP_STATUS2) & ESP_STAT2_F1BYTE) { + ESPHME(("<poke_byte>")); + sbus_writeb(0, esp->eregs + ESP_FDATA); + esp->hme_fifo_workaround_buffer[count++] = + sbus_readb(esp->eregs + ESP_FDATA); + ESPHME(("<%02x,0x00>", esp->hme_fifo_workaround_buffer[count-1])); + ESPHME(("CMD_FLUSH")); + esp_cmd(esp, ESP_CMD_FLUSH); + } else { + ESPHME(("no_xtra_byte")); + } + } + ESPHME(("wkarnd_cnt=%d]", (int)count)); + esp->hme_fifo_workaround_count = count; +} + +static inline void hme_fifo_push(struct esp *esp, u8 *bytes, u8 count) +{ + esp_cmd(esp, ESP_CMD_FLUSH); + while (count) { + u8 tmp = *bytes++; + sbus_writeb(tmp, esp->eregs + ESP_FDATA); + sbus_writeb(0, esp->eregs + ESP_FDATA); + count--; + } +} + +/* We try to avoid some interrupts by jumping ahead and see if the ESP + * has gotten far enough yet. Hence the following. + */ +static inline int skipahead1(struct esp *esp, struct scsi_cmnd *scp, + int prev_phase, int new_phase) +{ + if (scp->SCp.sent_command != prev_phase) + return 0; + if (ESP_IRQ_P(esp->dregs)) { + /* Yes, we are able to save an interrupt. */ + if (esp->erev == fashme) + esp->sreg2 = sbus_readb(esp->eregs + ESP_STATUS2); + esp->sreg = (sbus_readb(esp->eregs + ESP_STATUS) & ~(ESP_STAT_INTR)); + esp->ireg = sbus_readb(esp->eregs + ESP_INTRPT); + if (esp->erev == fashme) { + /* This chip is really losing. */ + ESPHME(("HME[")); + /* Must latch fifo before reading the interrupt + * register else garbage ends up in the FIFO + * which confuses the driver utterly. + * Happy Meal indeed.... + */ + ESPHME(("fifo_workaround]")); + if (!(esp->sreg2 & ESP_STAT2_FEMPTY) || + (esp->sreg2 & ESP_STAT2_F1BYTE)) + hme_fifo_read(esp); + } + if (!(esp->ireg & ESP_INTR_SR)) + return 0; + else + return do_reset_complete; + } + /* Ho hum, target is taking forever... */ + scp->SCp.sent_command = new_phase; /* so we don't recurse... */ + return do_intr_end; +} + +static inline int skipahead2(struct esp *esp, struct scsi_cmnd *scp, + int prev_phase1, int prev_phase2, int new_phase) +{ + if (scp->SCp.sent_command != prev_phase1 && + scp->SCp.sent_command != prev_phase2) + return 0; + if (ESP_IRQ_P(esp->dregs)) { + /* Yes, we are able to save an interrupt. */ + if (esp->erev == fashme) + esp->sreg2 = sbus_readb(esp->eregs + ESP_STATUS2); + esp->sreg = (sbus_readb(esp->eregs + ESP_STATUS) & ~(ESP_STAT_INTR)); + esp->ireg = sbus_readb(esp->eregs + ESP_INTRPT); + if (esp->erev == fashme) { + /* This chip is really losing. */ + ESPHME(("HME[")); + + /* Must latch fifo before reading the interrupt + * register else garbage ends up in the FIFO + * which confuses the driver utterly. + * Happy Meal indeed.... + */ + ESPHME(("fifo_workaround]")); + if (!(esp->sreg2 & ESP_STAT2_FEMPTY) || + (esp->sreg2 & ESP_STAT2_F1BYTE)) + hme_fifo_read(esp); + } + if (!(esp->ireg & ESP_INTR_SR)) + return 0; + else + return do_reset_complete; + } + /* Ho hum, target is taking forever... */ + scp->SCp.sent_command = new_phase; /* so we don't recurse... */ + return do_intr_end; +} + +/* Now some dma helpers. */ +static void dma_setup(struct esp *esp, __u32 addr, int count, int write) +{ + u32 nreg = sbus_readl(esp->dregs + DMA_CSR); + + if (write) + nreg |= DMA_ST_WRITE; + else + nreg &= ~(DMA_ST_WRITE); + nreg |= DMA_ENABLE; + sbus_writel(nreg, esp->dregs + DMA_CSR); + if (esp->dma->revision == dvmaesc1) { + /* This ESC gate array sucks! */ + __u32 src = addr; + __u32 dest = src + count; + + if (dest & (PAGE_SIZE - 1)) + count = PAGE_ALIGN(count); + sbus_writel(count, esp->dregs + DMA_COUNT); + } + sbus_writel(addr, esp->dregs + DMA_ADDR); +} + +static void dma_drain(struct esp *esp) +{ + u32 tmp; + + if (esp->dma->revision == dvmahme) + return; + if ((tmp = sbus_readl(esp->dregs + DMA_CSR)) & DMA_FIFO_ISDRAIN) { + switch (esp->dma->revision) { + default: + tmp |= DMA_FIFO_STDRAIN; + sbus_writel(tmp, esp->dregs + DMA_CSR); + + case dvmarev3: + case dvmaesc1: + while (sbus_readl(esp->dregs + DMA_CSR) & DMA_FIFO_ISDRAIN) + udelay(1); + }; + } +} + +static void dma_invalidate(struct esp *esp) +{ + u32 tmp; + + if (esp->dma->revision == dvmahme) { + sbus_writel(DMA_RST_SCSI, esp->dregs + DMA_CSR); + + esp->prev_hme_dmacsr = ((esp->prev_hme_dmacsr | + (DMA_PARITY_OFF | DMA_2CLKS | + DMA_SCSI_DISAB | DMA_INT_ENAB)) & + ~(DMA_ST_WRITE | DMA_ENABLE)); + + sbus_writel(0, esp->dregs + DMA_CSR); + sbus_writel(esp->prev_hme_dmacsr, esp->dregs + DMA_CSR); + + /* This is necessary to avoid having the SCSI channel + * engine lock up on us. + */ + sbus_writel(0, esp->dregs + DMA_ADDR); + } else { + while ((tmp = sbus_readl(esp->dregs + DMA_CSR)) & DMA_PEND_READ) + udelay(1); + + tmp &= ~(DMA_ENABLE | DMA_ST_WRITE | DMA_BCNT_ENAB); + tmp |= DMA_FIFO_INV; + sbus_writel(tmp, esp->dregs + DMA_CSR); + tmp &= ~DMA_FIFO_INV; + sbus_writel(tmp, esp->dregs + DMA_CSR); + } +} + +static inline void dma_flashclear(struct esp *esp) +{ + dma_drain(esp); + dma_invalidate(esp); +} + +static int dma_can_transfer(struct esp *esp, struct scsi_cmnd *sp) +{ + __u32 base, end, sz; + + if (esp->dma->revision == dvmarev3) { + sz = sp->SCp.this_residual; + if (sz > 0x1000000) + sz = 0x1000000; + } else { + base = ((__u32)((unsigned long)sp->SCp.ptr)); + base &= (0x1000000 - 1); + end = (base + sp->SCp.this_residual); + if (end > 0x1000000) + end = 0x1000000; + sz = (end - base); + } + return sz; +} + +/* Misc. esp helper macros. */ +#define esp_setcount(__eregs, __cnt, __hme) \ + sbus_writeb(((__cnt)&0xff), (__eregs) + ESP_TCLOW); \ + sbus_writeb((((__cnt)>>8)&0xff), (__eregs) + ESP_TCMED); \ + if (__hme) { \ + sbus_writeb((((__cnt)>>16)&0xff), (__eregs) + FAS_RLO); \ + sbus_writeb(0, (__eregs) + FAS_RHI); \ + } + +#define esp_getcount(__eregs, __hme) \ + ((sbus_readb((__eregs) + ESP_TCLOW)&0xff) | \ + ((sbus_readb((__eregs) + ESP_TCMED)&0xff) << 8) | \ + ((__hme) ? sbus_readb((__eregs) + FAS_RLO) << 16 : 0)) + +#define fcount(__esp) \ + (((__esp)->erev == fashme) ? \ + (__esp)->hme_fifo_workaround_count : \ + sbus_readb(((__esp)->eregs) + ESP_FFLAGS) & ESP_FF_FBYTES) + +#define fnzero(__esp) \ + (((__esp)->erev == fashme) ? 0 : \ + sbus_readb(((__esp)->eregs) + ESP_FFLAGS) & ESP_FF_ONOTZERO) + +/* XXX speculative nops unnecessary when continuing amidst a data phase + * XXX even on esp100!!! another case of flooding the bus with I/O reg + * XXX writes... + */ +#define esp_maybe_nop(__esp) \ + if ((__esp)->erev == esp100) \ + esp_cmd((__esp), ESP_CMD_NULL) + +#define sreg_to_dataphase(__sreg) \ + ((((__sreg) & ESP_STAT_PMASK) == ESP_DOP) ? in_dataout : in_datain) + +/* The ESP100 when in synchronous data phase, can mistake a long final + * REQ pulse from the target as an extra byte, it places whatever is on + * the data lines into the fifo. For now, we will assume when this + * happens that the target is a bit quirky and we don't want to + * be talking synchronously to it anyways. Regardless, we need to + * tell the ESP to eat the extraneous byte so that we can proceed + * to the next phase. + */ +static int esp100_sync_hwbug(struct esp *esp, struct scsi_cmnd *sp, int fifocnt) +{ + /* Do not touch this piece of code. */ + if ((!(esp->erev == esp100)) || + (!(sreg_datainp((esp->sreg = sbus_readb(esp->eregs + ESP_STATUS))) && + !fifocnt) && + !(sreg_dataoutp(esp->sreg) && !fnzero(esp)))) { + if (sp->SCp.phase == in_dataout) + esp_cmd(esp, ESP_CMD_FLUSH); + return 0; + } else { + /* Async mode for this guy. */ + build_sync_nego_msg(esp, 0, 0); + + /* Ack the bogus byte, but set ATN first. */ + esp_cmd(esp, ESP_CMD_SATN); + esp_cmd(esp, ESP_CMD_MOK); + return 1; + } +} + +/* This closes the window during a selection with a reselect pending, because + * we use DMA for the selection process the FIFO should hold the correct + * contents if we get reselected during this process. So we just need to + * ack the possible illegal cmd interrupt pending on the esp100. + */ +static inline int esp100_reconnect_hwbug(struct esp *esp) +{ + u8 tmp; + + if (esp->erev != esp100) + return 0; + tmp = sbus_readb(esp->eregs + ESP_INTRPT); + if (tmp & ESP_INTR_SR) + return 1; + return 0; +} + +/* This verifies the BUSID bits during a reselection so that we know which + * target is talking to us. + */ +static inline int reconnect_target(struct esp *esp) +{ + int it, me = esp->scsi_id_mask, targ = 0; + + if (2 != fcount(esp)) + return -1; + if (esp->erev == fashme) { + /* HME does not latch it's own BUS ID bits during + * a reselection. Also the target number is given + * as an unsigned char, not as a sole bit number + * like the other ESP's do. + * Happy Meal indeed.... + */ + targ = esp->hme_fifo_workaround_buffer[0]; + } else { + it = sbus_readb(esp->eregs + ESP_FDATA); + if (!(it & me)) + return -1; + it &= ~me; + if (it & (it - 1)) + return -1; + while (!(it & 1)) + targ++, it >>= 1; + } + return targ; +} + +/* This verifies the identify from the target so that we know which lun is + * being reconnected. + */ +static inline int reconnect_lun(struct esp *esp) +{ + int lun; + + if ((esp->sreg & ESP_STAT_PMASK) != ESP_MIP) + return -1; + if (esp->erev == fashme) + lun = esp->hme_fifo_workaround_buffer[1]; + else + lun = sbus_readb(esp->eregs + ESP_FDATA); + + /* Yes, you read this correctly. We report lun of zero + * if we see parity error. ESP reports parity error for + * the lun byte, and this is the only way to hope to recover + * because the target is connected. + */ + if (esp->sreg & ESP_STAT_PERR) + return 0; + + /* Check for illegal bits being set in the lun. */ + if ((lun & 0x40) || !(lun & 0x80)) + return -1; + + return lun & 7; +} + +/* This puts the driver in a state where it can revitalize a command that + * is being continued due to reselection. + */ +static inline void esp_connect(struct esp *esp, struct scsi_cmnd *sp) +{ + struct esp_device *esp_dev = sp->device->hostdata; + + if (esp->prev_soff != esp_dev->sync_max_offset || + esp->prev_stp != esp_dev->sync_min_period || + (esp->erev > esp100a && + esp->prev_cfg3 != esp->config3[sp->device->id])) { + esp->prev_soff = esp_dev->sync_max_offset; + esp->prev_stp = esp_dev->sync_min_period; + sbus_writeb(esp->prev_soff, esp->eregs + ESP_SOFF); + sbus_writeb(esp->prev_stp, esp->eregs + ESP_STP); + if (esp->erev > esp100a) { + esp->prev_cfg3 = esp->config3[sp->device->id]; + sbus_writeb(esp->prev_cfg3, esp->eregs + ESP_CFG3); + } + } + esp->current_SC = sp; +} + +/* This will place the current working command back into the issue queue + * if we are to receive a reselection amidst a selection attempt. + */ +static inline void esp_reconnect(struct esp *esp, struct scsi_cmnd *sp) +{ + if (!esp->disconnected_SC) + ESPLOG(("esp%d: Weird, being reselected but disconnected " + "command queue is empty.\n", esp->esp_id)); + esp->snip = 0; + esp->current_SC = 0; + sp->SCp.phase = not_issued; + append_SC(&esp->issue_SC, sp); +} + +/* Begin message in phase. */ +static int esp_do_msgin(struct esp *esp) +{ + /* Must be very careful with the fifo on the HME */ + if ((esp->erev != fashme) || + !(sbus_readb(esp->eregs + ESP_STATUS2) & ESP_STAT2_FEMPTY)) + esp_cmd(esp, ESP_CMD_FLUSH); + esp_maybe_nop(esp); + esp_cmd(esp, ESP_CMD_TI); + esp->msgin_len = 1; + esp->msgin_ctr = 0; + esp_advance_phase(esp->current_SC, in_msgindone); + return do_work_bus; +} + +/* This uses various DMA csr fields and the fifo flags count value to + * determine how many bytes were successfully sent/received by the ESP. + */ +static inline int esp_bytes_sent(struct esp *esp, int fifo_count) +{ + int rval = sbus_readl(esp->dregs + DMA_ADDR) - esp->esp_command_dvma; + + if (esp->dma->revision == dvmarev1) + rval -= (4 - ((sbus_readl(esp->dregs + DMA_CSR) & DMA_READ_AHEAD)>>11)); + return rval - fifo_count; +} + +static inline void advance_sg(struct scsi_cmnd *sp) +{ + ++sp->SCp.buffer; + --sp->SCp.buffers_residual; + sp->SCp.this_residual = sg_dma_len(sp->SCp.buffer); + sp->SCp.ptr = (char *)((unsigned long)sg_dma_address(sp->SCp.buffer)); +} + +/* Please note that the way I've coded these routines is that I _always_ + * check for a disconnect during any and all information transfer + * phases. The SCSI standard states that the target _can_ cause a BUS + * FREE condition by dropping all MSG/CD/IO/BSY signals. Also note + * that during information transfer phases the target controls every + * change in phase, the only thing the initiator can do is "ask" for + * a message out phase by driving ATN true. The target can, and sometimes + * will, completely ignore this request so we cannot assume anything when + * we try to force a message out phase to abort/reset a target. Most of + * the time the target will eventually be nice and go to message out, so + * we may have to hold on to our state about what we want to tell the target + * for some period of time. + */ + +/* I think I have things working here correctly. Even partial transfers + * within a buffer or sub-buffer should not upset us at all no matter + * how bad the target and/or ESP fucks things up. + */ +static int esp_do_data(struct esp *esp) +{ + struct scsi_cmnd *SCptr = esp->current_SC; + int thisphase, hmuch; + + ESPDATA(("esp_do_data: ")); + esp_maybe_nop(esp); + thisphase = sreg_to_dataphase(esp->sreg); + esp_advance_phase(SCptr, thisphase); + ESPDATA(("newphase<%s> ", (thisphase == in_datain) ? "DATAIN" : "DATAOUT")); + hmuch = dma_can_transfer(esp, SCptr); + if (hmuch > (64 * 1024) && (esp->erev != fashme)) + hmuch = (64 * 1024); + ESPDATA(("hmuch<%d> ", hmuch)); + esp->current_transfer_size = hmuch; + + if (esp->erev == fashme) { + u32 tmp = esp->prev_hme_dmacsr; + + /* Always set the ESP count registers first. */ + esp_setcount(esp->eregs, hmuch, 1); + + /* Get the DMA csr computed. */ + tmp |= (DMA_SCSI_DISAB | DMA_ENABLE); + if (thisphase == in_datain) + tmp |= DMA_ST_WRITE; + else + tmp &= ~(DMA_ST_WRITE); + esp->prev_hme_dmacsr = tmp; + + ESPDATA(("DMA|TI --> do_intr_end\n")); + if (thisphase == in_datain) { + sbus_writel(hmuch, esp->dregs + DMA_COUNT); + esp_cmd(esp, ESP_CMD_DMA | ESP_CMD_TI); + } else { + esp_cmd(esp, ESP_CMD_DMA | ESP_CMD_TI); + sbus_writel(hmuch, esp->dregs + DMA_COUNT); + } + sbus_writel((__u32)((unsigned long)SCptr->SCp.ptr), esp->dregs+DMA_ADDR); + sbus_writel(esp->prev_hme_dmacsr, esp->dregs + DMA_CSR); + } else { + esp_setcount(esp->eregs, hmuch, 0); + dma_setup(esp, ((__u32)((unsigned long)SCptr->SCp.ptr)), + hmuch, (thisphase == in_datain)); + ESPDATA(("DMA|TI --> do_intr_end\n")); + esp_cmd(esp, ESP_CMD_DMA | ESP_CMD_TI); + } + return do_intr_end; +} + +/* See how successful the data transfer was. */ +static int esp_do_data_finale(struct esp *esp) +{ + struct scsi_cmnd *SCptr = esp->current_SC; + struct esp_device *esp_dev = SCptr->device->hostdata; + int bogus_data = 0, bytes_sent = 0, fifocnt, ecount = 0; + + ESPDATA(("esp_do_data_finale: ")); + + if (SCptr->SCp.phase == in_datain) { + if (esp->sreg & ESP_STAT_PERR) { + /* Yuck, parity error. The ESP asserts ATN + * so that we can go to message out phase + * immediately and inform the target that + * something bad happened. + */ + ESPLOG(("esp%d: data bad parity detected.\n", + esp->esp_id)); + esp->cur_msgout[0] = INITIATOR_ERROR; + esp->msgout_len = 1; + } + dma_drain(esp); + } + dma_invalidate(esp); + + /* This could happen for the above parity error case. */ + if (esp->ireg != ESP_INTR_BSERV) { + /* Please go to msgout phase, please please please... */ + ESPLOG(("esp%d: !BSERV after data, probably to msgout\n", + esp->esp_id)); + return esp_do_phase_determine(esp); + } + + /* Check for partial transfers and other horrible events. + * Note, here we read the real fifo flags register even + * on HME broken adapters because we skip the HME fifo + * workaround code in esp_handle() if we are doing data + * phase things. We don't want to fuck directly with + * the fifo like that, especially if doing synchronous + * transfers! Also, will need to double the count on + * HME if we are doing wide transfers, as the HME fifo + * will move and count 16-bit quantities during wide data. + * SMCC _and_ Qlogic can both bite me. + */ + fifocnt = (sbus_readb(esp->eregs + ESP_FFLAGS) & ESP_FF_FBYTES); + if (esp->erev != fashme) + ecount = esp_getcount(esp->eregs, 0); + bytes_sent = esp->current_transfer_size; + + ESPDATA(("trans_sz(%d), ", bytes_sent)); + if (esp->erev == fashme) { + if (!(esp->sreg & ESP_STAT_TCNT)) { + ecount = esp_getcount(esp->eregs, 1); + bytes_sent -= ecount; + } + + /* Always subtract any cruft remaining in the FIFO. */ + if (esp->prev_cfg3 & ESP_CONFIG3_EWIDE) + fifocnt <<= 1; + if (SCptr->SCp.phase == in_dataout) + bytes_sent -= fifocnt; + + /* I have an IBM disk which exhibits the following + * behavior during writes to it. It disconnects in + * the middle of a partial transfer, the current sglist + * buffer is 1024 bytes, the disk stops data transfer + * at 512 bytes. + * + * However the FAS366 reports that 32 more bytes were + * transferred than really were. This is precisely + * the size of a fully loaded FIFO in wide scsi mode. + * The FIFO state recorded indicates that it is empty. + * + * I have no idea if this is a bug in the FAS366 chip + * or a bug in the firmware on this IBM disk. In any + * event the following seems to be a good workaround. -DaveM + */ + if (bytes_sent != esp->current_transfer_size && + SCptr->SCp.phase == in_dataout) { + int mask = (64 - 1); + + if ((esp->prev_cfg3 & ESP_CONFIG3_EWIDE) == 0) + mask >>= 1; + + if (bytes_sent & mask) + bytes_sent -= (bytes_sent & mask); + } + } else { + if (!(esp->sreg & ESP_STAT_TCNT)) + bytes_sent -= ecount; + if (SCptr->SCp.phase == in_dataout) + bytes_sent -= fifocnt; + } + + ESPDATA(("bytes_sent(%d), ", bytes_sent)); + + /* If we were in synchronous mode, check for peculiarities. */ + if (esp->erev == fashme) { + if (esp_dev->sync_max_offset) { + if (SCptr->SCp.phase == in_dataout) + esp_cmd(esp, ESP_CMD_FLUSH); + } else { + esp_cmd(esp, ESP_CMD_FLUSH); + } + } else { + if (esp_dev->sync_max_offset) + bogus_data = esp100_sync_hwbug(esp, SCptr, fifocnt); + else + esp_cmd(esp, ESP_CMD_FLUSH); + } + + /* Until we are sure of what has happened, we are certainly + * in the dark. + */ + esp_advance_phase(SCptr, in_the_dark); + + if (bytes_sent < 0) { + /* I've seen this happen due to lost state in this + * driver. No idea why it happened, but allowing + * this value to be negative caused things to + * lock up. This allows greater chance of recovery. + * In fact every time I've seen this, it has been + * a driver bug without question. + */ + ESPLOG(("esp%d: yieee, bytes_sent < 0!\n", esp->esp_id)); + ESPLOG(("esp%d: csz=%d fifocount=%d ecount=%d\n", + esp->esp_id, + esp->current_transfer_size, fifocnt, ecount)); + ESPLOG(("esp%d: use_sg=%d ptr=%p this_residual=%d\n", + esp->esp_id, + SCptr->use_sg, SCptr->SCp.ptr, SCptr->SCp.this_residual)); + ESPLOG(("esp%d: Forcing async for target %d\n", esp->esp_id, + SCptr->device->id)); + SCptr->device->borken = 1; + esp_dev->sync = 0; + bytes_sent = 0; + } + + /* Update the state of our transfer. */ + SCptr->SCp.ptr += bytes_sent; + SCptr->SCp.this_residual -= bytes_sent; + if (SCptr->SCp.this_residual < 0) { + /* shit */ + ESPLOG(("esp%d: Data transfer overrun.\n", esp->esp_id)); + SCptr->SCp.this_residual = 0; + } + + /* Maybe continue. */ + if (!bogus_data) { + ESPDATA(("!bogus_data, ")); + + /* NO MATTER WHAT, we advance the scatterlist, + * if the target should decide to disconnect + * in between scatter chunks (which is common) + * we could die horribly! I used to have the sg + * advance occur only if we are going back into + * (or are staying in) a data phase, you can + * imagine the hell I went through trying to + * figure this out. + */ + if (SCptr->use_sg && !SCptr->SCp.this_residual) + advance_sg(SCptr); + if (sreg_datainp(esp->sreg) || sreg_dataoutp(esp->sreg)) { + ESPDATA(("to more data\n")); + return esp_do_data(esp); + } + ESPDATA(("to new phase\n")); + return esp_do_phase_determine(esp); + } + /* Bogus data, just wait for next interrupt. */ + ESPLOG(("esp%d: bogus_data during end of data phase\n", + esp->esp_id)); + return do_intr_end; +} + +/* We received a non-good status return at the end of + * running a SCSI command. This is used to decide if + * we should clear our synchronous transfer state for + * such a device when that happens. + * + * The idea is that when spinning up a disk or rewinding + * a tape, we don't want to go into a loop re-negotiating + * synchronous capabilities over and over. + */ +static int esp_should_clear_sync(struct scsi_cmnd *sp) +{ + u8 cmd1 = sp->cmnd[0]; + u8 cmd2 = sp->data_cmnd[0]; + + /* These cases are for spinning up a disk and + * waiting for that spinup to complete. + */ + if (cmd1 == START_STOP || + cmd2 == START_STOP) + return 0; + + if (cmd1 == TEST_UNIT_READY || + cmd2 == TEST_UNIT_READY) + return 0; + + /* One more special case for SCSI tape drives, + * this is what is used to probe the device for + * completion of a rewind or tape load operation. + */ + if (sp->device->type == TYPE_TAPE) { + if (cmd1 == MODE_SENSE || + cmd2 == MODE_SENSE) + return 0; + } + + return 1; +} + +/* Either a command is completing or a target is dropping off the bus + * to continue the command in the background so we can do other work. + */ +static int esp_do_freebus(struct esp *esp) +{ + struct scsi_cmnd *SCptr = esp->current_SC; + struct esp_device *esp_dev = SCptr->device->hostdata; + int rval; + + rval = skipahead2(esp, SCptr, in_status, in_msgindone, in_freeing); + if (rval) + return rval; + if (esp->ireg != ESP_INTR_DC) { + ESPLOG(("esp%d: Target will not disconnect\n", esp->esp_id)); + return do_reset_bus; /* target will not drop BSY... */ + } + esp->msgout_len = 0; + esp->prevmsgout = NOP; + if (esp->prevmsgin == COMMAND_COMPLETE) { + /* Normal end of nexus. */ + if (esp->disconnected_SC || (esp->erev == fashme)) + esp_cmd(esp, ESP_CMD_ESEL); + + if (SCptr->SCp.Status != GOOD && + SCptr->SCp.Status != CONDITION_GOOD && + ((1<<SCptr->device->id) & esp->targets_present) && + esp_dev->sync && + esp_dev->sync_max_offset) { + /* SCSI standard says that the synchronous capabilities + * should be renegotiated at this point. Most likely + * we are about to request sense from this target + * in which case we want to avoid using sync + * transfers until we are sure of the current target + * state. + */ + ESPMISC(("esp: Status <%d> for target %d lun %d\n", + SCptr->SCp.Status, SCptr->device->id, SCptr->device->lun)); + + /* But don't do this when spinning up a disk at + * boot time while we poll for completion as it + * fills up the console with messages. Also, tapes + * can report not ready many times right after + * loading up a tape. + */ + if (esp_should_clear_sync(SCptr) != 0) + esp_dev->sync = 0; + } + ESPDISC(("F<%02x,%02x>", SCptr->device->id, SCptr->device->lun)); + esp_done(esp, ((SCptr->SCp.Status & 0xff) | + ((SCptr->SCp.Message & 0xff)<<8) | + (DID_OK << 16))); + } else if (esp->prevmsgin == DISCONNECT) { + /* Normal disconnect. */ + esp_cmd(esp, ESP_CMD_ESEL); + ESPDISC(("D<%02x,%02x>", SCptr->device->id, SCptr->device->lun)); + append_SC(&esp->disconnected_SC, SCptr); + esp->current_SC = NULL; + if (esp->issue_SC) + esp_exec_cmd(esp); + } else { + /* Driver bug, we do not expect a disconnect here + * and should not have advanced the state engine + * to in_freeing. + */ + ESPLOG(("esp%d: last msg not disc and not cmd cmplt.\n", + esp->esp_id)); + return do_reset_bus; + } + return do_intr_end; +} + +/* When a reselect occurs, and we cannot find the command to + * reconnect to in our queues, we do this. + */ +static int esp_bad_reconnect(struct esp *esp) +{ + struct scsi_cmnd *sp; + + ESPLOG(("esp%d: Eieeee, reconnecting unknown command!\n", + esp->esp_id)); + ESPLOG(("QUEUE DUMP\n")); + sp = esp->issue_SC; + ESPLOG(("esp%d: issue_SC[", esp->esp_id)); + while (sp) { + ESPLOG(("<%02x,%02x>", sp->device->id, sp->device->lun)); + sp = (struct scsi_cmnd *) sp->host_scribble; + } + ESPLOG(("]\n")); + sp = esp->current_SC; + ESPLOG(("esp%d: current_SC[", esp->esp_id)); + if (sp) + ESPLOG(("<%02x,%02x>", sp->device->id, sp->device->lun)); + else + ESPLOG(("<NULL>")); + ESPLOG(("]\n")); + sp = esp->disconnected_SC; + ESPLOG(("esp%d: disconnected_SC[", esp->esp_id)); + while (sp) { + ESPLOG(("<%02x,%02x>", sp->device->id, sp->device->lun)); + sp = (struct scsi_cmnd *) sp->host_scribble; + } + ESPLOG(("]\n")); + return do_reset_bus; +} + +/* Do the needy when a target tries to reconnect to us. */ +static int esp_do_reconnect(struct esp *esp) +{ + int lun, target; + struct scsi_cmnd *SCptr; + + /* Check for all bogus conditions first. */ + target = reconnect_target(esp); + if (target < 0) { + ESPDISC(("bad bus bits\n")); + return do_reset_bus; + } + lun = reconnect_lun(esp); + if (lun < 0) { + ESPDISC(("target=%2x, bad identify msg\n", target)); + return do_reset_bus; + } + + /* Things look ok... */ + ESPDISC(("R<%02x,%02x>", target, lun)); + + /* Must not flush FIFO or DVMA on HME. */ + if (esp->erev != fashme) { + esp_cmd(esp, ESP_CMD_FLUSH); + if (esp100_reconnect_hwbug(esp)) + return do_reset_bus; + esp_cmd(esp, ESP_CMD_NULL); + } + + SCptr = remove_SC(&esp->disconnected_SC, (u8) target, (u8) lun); + if (!SCptr) + return esp_bad_reconnect(esp); + + esp_connect(esp, SCptr); + esp_cmd(esp, ESP_CMD_MOK); + + if (esp->erev == fashme) + sbus_writeb(((SCptr->device->id & 0xf) | + (ESP_BUSID_RESELID | ESP_BUSID_CTR32BIT)), + esp->eregs + ESP_BUSID); + + /* Reconnect implies a restore pointers operation. */ + esp_restore_pointers(esp, SCptr); + + esp->snip = 0; + esp_advance_phase(SCptr, in_the_dark); + return do_intr_end; +} + +/* End of NEXUS (hopefully), pick up status + message byte then leave if + * all goes well. + */ +static int esp_do_status(struct esp *esp) +{ + struct scsi_cmnd *SCptr = esp->current_SC; + int intr, rval; + + rval = skipahead1(esp, SCptr, in_the_dark, in_status); + if (rval) + return rval; + intr = esp->ireg; + ESPSTAT(("esp_do_status: ")); + if (intr != ESP_INTR_DC) { + int message_out = 0; /* for parity problems */ + + /* Ack the message. */ + ESPSTAT(("ack msg, ")); + esp_cmd(esp, ESP_CMD_MOK); + + if (esp->erev != fashme) { + dma_flashclear(esp); + + /* Wait till the first bits settle. */ + while (esp->esp_command[0] == 0xff) + udelay(1); + } else { + esp->esp_command[0] = esp->hme_fifo_workaround_buffer[0]; + esp->esp_command[1] = esp->hme_fifo_workaround_buffer[1]; + } + + ESPSTAT(("got something, ")); + /* ESP chimes in with one of + * + * 1) function done interrupt: + * both status and message in bytes + * are available + * + * 2) bus service interrupt: + * only status byte was acquired + * + * 3) Anything else: + * can't happen, but we test for it + * anyways + * + * ALSO: If bad parity was detected on either + * the status _or_ the message byte then + * the ESP has asserted ATN on the bus + * and we must therefore wait for the + * next phase change. + */ + if (intr & ESP_INTR_FDONE) { + /* We got it all, hallejulia. */ + ESPSTAT(("got both, ")); + SCptr->SCp.Status = esp->esp_command[0]; + SCptr->SCp.Message = esp->esp_command[1]; + esp->prevmsgin = SCptr->SCp.Message; + esp->cur_msgin[0] = SCptr->SCp.Message; + if (esp->sreg & ESP_STAT_PERR) { + /* There was bad parity for the + * message byte, the status byte + * was ok. + */ + message_out = MSG_PARITY_ERROR; + } + } else if (intr == ESP_INTR_BSERV) { + /* Only got status byte. */ + ESPLOG(("esp%d: got status only, ", esp->esp_id)); + if (!(esp->sreg & ESP_STAT_PERR)) { + SCptr->SCp.Status = esp->esp_command[0]; + SCptr->SCp.Message = 0xff; + } else { + /* The status byte had bad parity. + * we leave the scsi_pointer Status + * field alone as we set it to a default + * of CHECK_CONDITION in esp_queue. + */ + message_out = INITIATOR_ERROR; + } + } else { + /* This shouldn't happen ever. */ + ESPSTAT(("got bolixed\n")); + esp_advance_phase(SCptr, in_the_dark); + return esp_do_phase_determine(esp); + } + + if (!message_out) { + ESPSTAT(("status=%2x msg=%2x, ", SCptr->SCp.Status, + SCptr->SCp.Message)); + if (SCptr->SCp.Message == COMMAND_COMPLETE) { + ESPSTAT(("and was COMMAND_COMPLETE\n")); + esp_advance_phase(SCptr, in_freeing); + return esp_do_freebus(esp); + } else { + ESPLOG(("esp%d: and _not_ COMMAND_COMPLETE\n", + esp->esp_id)); + esp->msgin_len = esp->msgin_ctr = 1; + esp_advance_phase(SCptr, in_msgindone); + return esp_do_msgindone(esp); + } + } else { + /* With luck we'll be able to let the target + * know that bad parity happened, it will know + * which byte caused the problems and send it + * again. For the case where the status byte + * receives bad parity, I do not believe most + * targets recover very well. We'll see. + */ + ESPLOG(("esp%d: bad parity somewhere mout=%2x\n", + esp->esp_id, message_out)); + esp->cur_msgout[0] = message_out; + esp->msgout_len = esp->msgout_ctr = 1; + esp_advance_phase(SCptr, in_the_dark); + return esp_do_phase_determine(esp); + } + } else { + /* If we disconnect now, all hell breaks loose. */ + ESPLOG(("esp%d: whoops, disconnect\n", esp->esp_id)); + esp_advance_phase(SCptr, in_the_dark); + return esp_do_phase_determine(esp); + } +} + +static int esp_enter_status(struct esp *esp) +{ + u8 thecmd = ESP_CMD_ICCSEQ; + + esp_cmd(esp, ESP_CMD_FLUSH); + if (esp->erev != fashme) { + u32 tmp; + + esp->esp_command[0] = esp->esp_command[1] = 0xff; + sbus_writeb(2, esp->eregs + ESP_TCLOW); + sbus_writeb(0, esp->eregs + ESP_TCMED); + tmp = sbus_readl(esp->dregs + DMA_CSR); + tmp |= (DMA_ST_WRITE | DMA_ENABLE); + sbus_writel(tmp, esp->dregs + DMA_CSR); + if (esp->dma->revision == dvmaesc1) + sbus_writel(0x100, esp->dregs + DMA_COUNT); + sbus_writel(esp->esp_command_dvma, esp->dregs + DMA_ADDR); + thecmd |= ESP_CMD_DMA; + } + esp_cmd(esp, thecmd); + esp_advance_phase(esp->current_SC, in_status); + + return esp_do_status(esp); +} + +static int esp_disconnect_amidst_phases(struct esp *esp) +{ + struct scsi_cmnd *sp = esp->current_SC; + struct esp_device *esp_dev = sp->device->hostdata; + + /* This means real problems if we see this + * here. Unless we were actually trying + * to force the device to abort/reset. + */ + ESPLOG(("esp%d Disconnect amidst phases, ", esp->esp_id)); + ESPLOG(("pphase<%s> cphase<%s>, ", + phase_string(sp->SCp.phase), + phase_string(sp->SCp.sent_command))); + + if (esp->disconnected_SC != NULL || (esp->erev == fashme)) + esp_cmd(esp, ESP_CMD_ESEL); + + switch (esp->cur_msgout[0]) { + default: + /* We didn't expect this to happen at all. */ + ESPLOG(("device is bolixed\n")); + esp_advance_phase(sp, in_tgterror); + esp_done(esp, (DID_ERROR << 16)); + break; + + case BUS_DEVICE_RESET: + ESPLOG(("device reset successful\n")); + esp_dev->sync_max_offset = 0; + esp_dev->sync_min_period = 0; + esp_dev->sync = 0; + esp_advance_phase(sp, in_resetdev); + esp_done(esp, (DID_RESET << 16)); + break; + + case ABORT: + ESPLOG(("device abort successful\n")); + esp_advance_phase(sp, in_abortone); + esp_done(esp, (DID_ABORT << 16)); + break; + + }; + return do_intr_end; +} + +static int esp_enter_msgout(struct esp *esp) +{ + esp_advance_phase(esp->current_SC, in_msgout); + return esp_do_msgout(esp); +} + +static int esp_enter_msgin(struct esp *esp) +{ + esp_advance_phase(esp->current_SC, in_msgin); + return esp_do_msgin(esp); +} + +static int esp_enter_cmd(struct esp *esp) +{ + esp_advance_phase(esp->current_SC, in_cmdbegin); + return esp_do_cmdbegin(esp); +} + +static int esp_enter_badphase(struct esp *esp) +{ + ESPLOG(("esp%d: Bizarre bus phase %2x.\n", esp->esp_id, + esp->sreg & ESP_STAT_PMASK)); + return do_reset_bus; +} + +typedef int (*espfunc_t)(struct esp *); + +static espfunc_t phase_vector[] = { + esp_do_data, /* ESP_DOP */ + esp_do_data, /* ESP_DIP */ + esp_enter_cmd, /* ESP_CMDP */ + esp_enter_status, /* ESP_STATP */ + esp_enter_badphase, /* ESP_STAT_PMSG */ + esp_enter_badphase, /* ESP_STAT_PMSG | ESP_STAT_PIO */ + esp_enter_msgout, /* ESP_MOP */ + esp_enter_msgin, /* ESP_MIP */ +}; + +/* The target has control of the bus and we have to see where it has + * taken us. + */ +static int esp_do_phase_determine(struct esp *esp) +{ + if ((esp->ireg & ESP_INTR_DC) != 0) + return esp_disconnect_amidst_phases(esp); + return phase_vector[esp->sreg & ESP_STAT_PMASK](esp); +} + +/* First interrupt after exec'ing a cmd comes here. */ +static int esp_select_complete(struct esp *esp) +{ + struct scsi_cmnd *SCptr = esp->current_SC; + struct esp_device *esp_dev = SCptr->device->hostdata; + int cmd_bytes_sent, fcnt; + + if (esp->erev != fashme) + esp->seqreg = (sbus_readb(esp->eregs + ESP_SSTEP) & ESP_STEP_VBITS); + + if (esp->erev == fashme) + fcnt = esp->hme_fifo_workaround_count; + else + fcnt = (sbus_readb(esp->eregs + ESP_FFLAGS) & ESP_FF_FBYTES); + + cmd_bytes_sent = esp_bytes_sent(esp, fcnt); + dma_invalidate(esp); + + /* Let's check to see if a reselect happened + * while we we're trying to select. This must + * be checked first. + */ + if (esp->ireg == (ESP_INTR_RSEL | ESP_INTR_FDONE)) { + esp_reconnect(esp, SCptr); + return esp_do_reconnect(esp); + } + + /* Looks like things worked, we should see a bus service & + * a function complete interrupt at this point. Note we + * are doing a direct comparison because we don't want to + * be fooled into thinking selection was successful if + * ESP_INTR_DC is set, see below. + */ + if (esp->ireg == (ESP_INTR_FDONE | ESP_INTR_BSERV)) { + /* target speaks... */ + esp->targets_present |= (1<<SCptr->device->id); + + /* What if the target ignores the sdtr? */ + if (esp->snip) + esp_dev->sync = 1; + + /* See how far, if at all, we got in getting + * the information out to the target. + */ + switch (esp->seqreg) { + default: + + case ESP_STEP_ASEL: + /* Arbitration won, target selected, but + * we are in some phase which is not command + * phase nor is it message out phase. + * + * XXX We've confused the target, obviously. + * XXX So clear it's state, but we also end + * XXX up clearing everyone elses. That isn't + * XXX so nice. I'd like to just reset this + * XXX target, but if I cannot even get it's + * XXX attention and finish selection to talk + * XXX to it, there is not much more I can do. + * XXX If we have a loaded bus we're going to + * XXX spend the next second or so renegotiating + * XXX for synchronous transfers. + */ + ESPLOG(("esp%d: STEP_ASEL for tgt %d\n", + esp->esp_id, SCptr->device->id)); + + case ESP_STEP_SID: + /* Arbitration won, target selected, went + * to message out phase, sent one message + * byte, then we stopped. ATN is asserted + * on the SCSI bus and the target is still + * there hanging on. This is a legal + * sequence step if we gave the ESP a select + * and stop command. + * + * XXX See above, I could set the borken flag + * XXX in the device struct and retry the + * XXX command. But would that help for + * XXX tagged capable targets? + */ + + case ESP_STEP_NCMD: + /* Arbitration won, target selected, maybe + * sent the one message byte in message out + * phase, but we did not go to command phase + * in the end. Actually, we could have sent + * only some of the message bytes if we tried + * to send out the entire identify and tag + * message using ESP_CMD_SA3. + */ + cmd_bytes_sent = 0; + break; + + case ESP_STEP_PPC: + /* No, not the powerPC pinhead. Arbitration + * won, all message bytes sent if we went to + * message out phase, went to command phase + * but only part of the command was sent. + * + * XXX I've seen this, but usually in conjunction + * XXX with a gross error which appears to have + * XXX occurred between the time I told the + * XXX ESP to arbitrate and when I got the + * XXX interrupt. Could I have misloaded the + * XXX command bytes into the fifo? Actually, + * XXX I most likely missed a phase, and therefore + * XXX went into never never land and didn't even + * XXX know it. That was the old driver though. + * XXX What is even more peculiar is that the ESP + * XXX showed the proper function complete and + * XXX bus service bits in the interrupt register. + */ + + case ESP_STEP_FINI4: + case ESP_STEP_FINI5: + case ESP_STEP_FINI6: + case ESP_STEP_FINI7: + /* Account for the identify message */ + if (SCptr->SCp.phase == in_slct_norm) + cmd_bytes_sent -= 1; + }; + + if (esp->erev != fashme) + esp_cmd(esp, ESP_CMD_NULL); + + /* Be careful, we could really get fucked during synchronous + * data transfers if we try to flush the fifo now. + */ + if ((esp->erev != fashme) && /* not a Happy Meal and... */ + !fcnt && /* Fifo is empty and... */ + /* either we are not doing synchronous transfers or... */ + (!esp_dev->sync_max_offset || + /* We are not going into data in phase. */ + ((esp->sreg & ESP_STAT_PMASK) != ESP_DIP))) + esp_cmd(esp, ESP_CMD_FLUSH); /* flush is safe */ + + /* See how far we got if this is not a slow command. */ + if (!esp->esp_slowcmd) { + if (cmd_bytes_sent < 0) + cmd_bytes_sent = 0; + if (cmd_bytes_sent != SCptr->cmd_len) { + /* Crapola, mark it as a slowcmd + * so that we have some chance of + * keeping the command alive with + * good luck. + * + * XXX Actually, if we didn't send it all + * XXX this means either we didn't set things + * XXX up properly (driver bug) or the target + * XXX or the ESP detected parity on one of + * XXX the command bytes. This makes much + * XXX more sense, and therefore this code + * XXX should be changed to send out a + * XXX parity error message or if the status + * XXX register shows no parity error then + * XXX just expect the target to bring the + * XXX bus into message in phase so that it + * XXX can send us the parity error message. + * XXX SCSI sucks... + */ + esp->esp_slowcmd = 1; + esp->esp_scmdp = &(SCptr->cmnd[cmd_bytes_sent]); + esp->esp_scmdleft = (SCptr->cmd_len - cmd_bytes_sent); + } + } + + /* Now figure out where we went. */ + esp_advance_phase(SCptr, in_the_dark); + return esp_do_phase_determine(esp); + } + + /* Did the target even make it? */ + if (esp->ireg == ESP_INTR_DC) { + /* wheee... nobody there or they didn't like + * what we told it to do, clean up. + */ + + /* If anyone is off the bus, but working on + * a command in the background for us, tell + * the ESP to listen for them. + */ + if (esp->disconnected_SC) + esp_cmd(esp, ESP_CMD_ESEL); + + if (((1<<SCptr->device->id) & esp->targets_present) && + esp->seqreg != 0 && + (esp->cur_msgout[0] == EXTENDED_MESSAGE) && + (SCptr->SCp.phase == in_slct_msg || + SCptr->SCp.phase == in_slct_stop)) { + /* shit */ + esp->snip = 0; + ESPLOG(("esp%d: Failed synchronous negotiation for target %d " + "lun %d\n", esp->esp_id, SCptr->device->id, SCptr->device->lun)); + esp_dev->sync_max_offset = 0; + esp_dev->sync_min_period = 0; + esp_dev->sync = 1; /* so we don't negotiate again */ + + /* Run the command again, this time though we + * won't try to negotiate for synchronous transfers. + * + * XXX I'd like to do something like send an + * XXX INITIATOR_ERROR or ABORT message to the + * XXX target to tell it, "Sorry I confused you, + * XXX please come back and I will be nicer next + * XXX time". But that requires having the target + * XXX on the bus, and it has dropped BSY on us. + */ + esp->current_SC = NULL; + esp_advance_phase(SCptr, not_issued); + prepend_SC(&esp->issue_SC, SCptr); + esp_exec_cmd(esp); + return do_intr_end; + } + + /* Ok, this is normal, this is what we see during boot + * or whenever when we are scanning the bus for targets. + * But first make sure that is really what is happening. + */ + if (((1<<SCptr->device->id) & esp->targets_present)) { + ESPLOG(("esp%d: Warning, live target %d not responding to " + "selection.\n", esp->esp_id, SCptr->device->id)); + + /* This _CAN_ happen. The SCSI standard states that + * the target is to _not_ respond to selection if + * _it_ detects bad parity on the bus for any reason. + * Therefore, we assume that if we've talked successfully + * to this target before, bad parity is the problem. + */ + esp_done(esp, (DID_PARITY << 16)); + } else { + /* Else, there really isn't anyone there. */ + ESPMISC(("esp: selection failure, maybe nobody there?\n")); + ESPMISC(("esp: target %d lun %d\n", + SCptr->device->id, SCptr->device->lun)); + esp_done(esp, (DID_BAD_TARGET << 16)); + } + return do_intr_end; + } + + ESPLOG(("esp%d: Selection failure.\n", esp->esp_id)); + printk("esp%d: Currently -- ", esp->esp_id); + esp_print_ireg(esp->ireg); printk(" "); + esp_print_statreg(esp->sreg); printk(" "); + esp_print_seqreg(esp->seqreg); printk("\n"); + printk("esp%d: New -- ", esp->esp_id); + esp->sreg = sbus_readb(esp->eregs + ESP_STATUS); + esp->seqreg = sbus_readb(esp->eregs + ESP_SSTEP); + esp->ireg = sbus_readb(esp->eregs + ESP_INTRPT); + esp_print_ireg(esp->ireg); printk(" "); + esp_print_statreg(esp->sreg); printk(" "); + esp_print_seqreg(esp->seqreg); printk("\n"); + ESPLOG(("esp%d: resetting bus\n", esp->esp_id)); + return do_reset_bus; /* ugh... */ +} + +/* Continue reading bytes for msgin phase. */ +static int esp_do_msgincont(struct esp *esp) +{ + if (esp->ireg & ESP_INTR_BSERV) { + /* in the right phase too? */ + if ((esp->sreg & ESP_STAT_PMASK) == ESP_MIP) { + /* phew... */ + esp_cmd(esp, ESP_CMD_TI); + esp_advance_phase(esp->current_SC, in_msgindone); + return do_intr_end; + } + + /* We changed phase but ESP shows bus service, + * in this case it is most likely that we, the + * hacker who has been up for 20hrs straight + * staring at the screen, drowned in coffee + * smelling like retched cigarette ashes + * have miscoded something..... so, try to + * recover as best we can. + */ + ESPLOG(("esp%d: message in mis-carriage.\n", esp->esp_id)); + } + esp_advance_phase(esp->current_SC, in_the_dark); + return do_phase_determine; +} + +static int check_singlebyte_msg(struct esp *esp) +{ + esp->prevmsgin = esp->cur_msgin[0]; + if (esp->cur_msgin[0] & 0x80) { + /* wheee... */ + ESPLOG(("esp%d: target sends identify amidst phases\n", + esp->esp_id)); + esp_advance_phase(esp->current_SC, in_the_dark); + return 0; + } else if (((esp->cur_msgin[0] & 0xf0) == 0x20) || + (esp->cur_msgin[0] == EXTENDED_MESSAGE)) { + esp->msgin_len = 2; + esp_advance_phase(esp->current_SC, in_msgincont); + return 0; + } + esp_advance_phase(esp->current_SC, in_the_dark); + switch (esp->cur_msgin[0]) { + default: + /* We don't want to hear about it. */ + ESPLOG(("esp%d: msg %02x which we don't know about\n", esp->esp_id, + esp->cur_msgin[0])); + return MESSAGE_REJECT; + + case NOP: + ESPLOG(("esp%d: target %d sends a nop\n", esp->esp_id, + esp->current_SC->device->id)); + return 0; + + case RESTORE_POINTERS: + /* In this case we might also have to backup the + * "slow command" pointer. It is rare to get such + * a save/restore pointer sequence so early in the + * bus transition sequences, but cover it. + */ + if (esp->esp_slowcmd) { + esp->esp_scmdleft = esp->current_SC->cmd_len; + esp->esp_scmdp = &esp->current_SC->cmnd[0]; + } + esp_restore_pointers(esp, esp->current_SC); + return 0; + + case SAVE_POINTERS: + esp_save_pointers(esp, esp->current_SC); + return 0; + + case COMMAND_COMPLETE: + case DISCONNECT: + /* Freeing the bus, let it go. */ + esp->current_SC->SCp.phase = in_freeing; + return 0; + + case MESSAGE_REJECT: + ESPMISC(("msg reject, ")); + if (esp->prevmsgout == EXTENDED_MESSAGE) { + struct esp_device *esp_dev = esp->current_SC->device->hostdata; + + /* Doesn't look like this target can + * do synchronous or WIDE transfers. + */ + ESPSDTR(("got reject, was trying nego, clearing sync/WIDE\n")); + esp_dev->sync = 1; + esp_dev->wide = 1; + esp_dev->sync_min_period = 0; + esp_dev->sync_max_offset = 0; + return 0; + } else { + ESPMISC(("not sync nego, sending ABORT\n")); + return ABORT; + } + }; +} + +/* Target negotiates for synchronous transfers before we do, this + * is legal although very strange. What is even funnier is that + * the SCSI2 standard specifically recommends against targets doing + * this because so many initiators cannot cope with this occurring. + */ +static int target_with_ants_in_pants(struct esp *esp, + struct scsi_cmnd *SCptr, + struct esp_device *esp_dev) +{ + if (esp_dev->sync || SCptr->device->borken) { + /* sorry, no can do */ + ESPSDTR(("forcing to async, ")); + build_sync_nego_msg(esp, 0, 0); + esp_dev->sync = 1; + esp->snip = 1; + ESPLOG(("esp%d: hoping for msgout\n", esp->esp_id)); + esp_advance_phase(SCptr, in_the_dark); + return EXTENDED_MESSAGE; + } + + /* Ok, we'll check them out... */ + return 0; +} + +static void sync_report(struct esp *esp) +{ + int msg3, msg4; + char *type; + + msg3 = esp->cur_msgin[3]; + msg4 = esp->cur_msgin[4]; + if (msg4) { + int hz = 1000000000 / (msg3 * 4); + int integer = hz / 1000000; + int fraction = (hz - (integer * 1000000)) / 10000; + if ((esp->erev == fashme) && + (esp->config3[esp->current_SC->device->id] & ESP_CONFIG3_EWIDE)) { + type = "FAST-WIDE"; + integer <<= 1; + fraction <<= 1; + } else if ((msg3 * 4) < 200) { + type = "FAST"; + } else { + type = "synchronous"; + } + + /* Do not transform this back into one big printk + * again, it triggers a bug in our sparc64-gcc272 + * sibling call optimization. -DaveM + */ + ESPLOG((KERN_INFO "esp%d: target %d ", + esp->esp_id, esp->current_SC->device->id)); + ESPLOG(("[period %dns offset %d %d.%02dMHz ", + (int) msg3 * 4, (int) msg4, + integer, fraction)); + ESPLOG(("%s SCSI%s]\n", type, + (((msg3 * 4) < 200) ? "-II" : ""))); + } else { + ESPLOG((KERN_INFO "esp%d: target %d asynchronous\n", + esp->esp_id, esp->current_SC->device->id)); + } +} + +static int check_multibyte_msg(struct esp *esp) +{ + struct scsi_cmnd *SCptr = esp->current_SC; + struct esp_device *esp_dev = SCptr->device->hostdata; + u8 regval = 0; + int message_out = 0; + + ESPSDTR(("chk multibyte msg: ")); + if (esp->cur_msgin[2] == EXTENDED_SDTR) { + int period = esp->cur_msgin[3]; + int offset = esp->cur_msgin[4]; + + ESPSDTR(("is sync nego response, ")); + if (!esp->snip) { + int rval; + + /* Target negotiates first! */ + ESPSDTR(("target jumps the gun, ")); + message_out = EXTENDED_MESSAGE; /* we must respond */ + rval = target_with_ants_in_pants(esp, SCptr, esp_dev); + if (rval) + return rval; + } + + ESPSDTR(("examining sdtr, ")); + + /* Offset cannot be larger than ESP fifo size. */ + if (offset > 15) { + ESPSDTR(("offset too big %2x, ", offset)); + offset = 15; + ESPSDTR(("sending back new offset\n")); + build_sync_nego_msg(esp, period, offset); + return EXTENDED_MESSAGE; + } + + if (offset && period > esp->max_period) { + /* Yeee, async for this slow device. */ + ESPSDTR(("period too long %2x, ", period)); + build_sync_nego_msg(esp, 0, 0); + ESPSDTR(("hoping for msgout\n")); + esp_advance_phase(esp->current_SC, in_the_dark); + return EXTENDED_MESSAGE; + } else if (offset && period < esp->min_period) { + ESPSDTR(("period too short %2x, ", period)); + period = esp->min_period; + if (esp->erev > esp236) + regval = 4; + else + regval = 5; + } else if (offset) { + int tmp; + + ESPSDTR(("period is ok, ")); + tmp = esp->ccycle / 1000; + regval = (((period << 2) + tmp - 1) / tmp); + if (regval && ((esp->erev == fas100a || + esp->erev == fas236 || + esp->erev == fashme))) { + if (period >= 50) + regval--; + } + } + + if (offset) { + u8 bit; + + esp_dev->sync_min_period = (regval & 0x1f); + esp_dev->sync_max_offset = (offset | esp->radelay); + if (esp->erev == fas100a || esp->erev == fas236 || esp->erev == fashme) { + if ((esp->erev == fas100a) || (esp->erev == fashme)) + bit = ESP_CONFIG3_FAST; + else + bit = ESP_CONFIG3_FSCSI; + if (period < 50) { + /* On FAS366, if using fast-20 synchronous transfers + * we need to make sure the REQ/ACK assert/deassert + * control bits are clear. + */ + if (esp->erev == fashme) + esp_dev->sync_max_offset &= ~esp->radelay; + esp->config3[SCptr->device->id] |= bit; + } else { + esp->config3[SCptr->device->id] &= ~bit; + } + esp->prev_cfg3 = esp->config3[SCptr->device->id]; + sbus_writeb(esp->prev_cfg3, esp->eregs + ESP_CFG3); + } + esp->prev_soff = esp_dev->sync_max_offset; + esp->prev_stp = esp_dev->sync_min_period; + sbus_writeb(esp->prev_soff, esp->eregs + ESP_SOFF); + sbus_writeb(esp->prev_stp, esp->eregs + ESP_STP); + ESPSDTR(("soff=%2x stp=%2x cfg3=%2x\n", + esp_dev->sync_max_offset, + esp_dev->sync_min_period, + esp->config3[SCptr->device->id])); + + esp->snip = 0; + } else if (esp_dev->sync_max_offset) { + u8 bit; + + /* back to async mode */ + ESPSDTR(("unaccaptable sync nego, forcing async\n")); + esp_dev->sync_max_offset = 0; + esp_dev->sync_min_period = 0; + esp->prev_soff = 0; + esp->prev_stp = 0; + sbus_writeb(esp->prev_soff, esp->eregs + ESP_SOFF); + sbus_writeb(esp->prev_stp, esp->eregs + ESP_STP); + if (esp->erev == fas100a || esp->erev == fas236 || esp->erev == fashme) { + if ((esp->erev == fas100a) || (esp->erev == fashme)) + bit = ESP_CONFIG3_FAST; + else + bit = ESP_CONFIG3_FSCSI; + esp->config3[SCptr->device->id] &= ~bit; + esp->prev_cfg3 = esp->config3[SCptr->device->id]; + sbus_writeb(esp->prev_cfg3, esp->eregs + ESP_CFG3); + } + } + + sync_report(esp); + + ESPSDTR(("chk multibyte msg: sync is known, ")); + esp_dev->sync = 1; + + if (message_out) { + ESPLOG(("esp%d: sending sdtr back, hoping for msgout\n", + esp->esp_id)); + build_sync_nego_msg(esp, period, offset); + esp_advance_phase(SCptr, in_the_dark); + return EXTENDED_MESSAGE; + } + + ESPSDTR(("returning zero\n")); + esp_advance_phase(SCptr, in_the_dark); /* ...or else! */ + return 0; + } else if (esp->cur_msgin[2] == EXTENDED_WDTR) { + int size = 8 << esp->cur_msgin[3]; + + esp->wnip = 0; + if (esp->erev != fashme) { + ESPLOG(("esp%d: AIEEE wide msg received and not HME.\n", + esp->esp_id)); + message_out = MESSAGE_REJECT; + } else if (size > 16) { + ESPLOG(("esp%d: AIEEE wide transfer for %d size " + "not supported.\n", esp->esp_id, size)); + message_out = MESSAGE_REJECT; + } else { + /* Things look good; let's see what we got. */ + if (size == 16) { + /* Set config 3 register for this target. */ + esp->config3[SCptr->device->id] |= ESP_CONFIG3_EWIDE; + } else { + /* Just make sure it was one byte sized. */ + if (size != 8) { + ESPLOG(("esp%d: Aieee, wide nego of %d size.\n", + esp->esp_id, size)); + message_out = MESSAGE_REJECT; + goto finish; + } + /* Pure paranoia. */ + esp->config3[SCptr->device->id] &= ~(ESP_CONFIG3_EWIDE); + } + esp->prev_cfg3 = esp->config3[SCptr->device->id]; + sbus_writeb(esp->prev_cfg3, esp->eregs + ESP_CFG3); + + /* Regardless, next try for sync transfers. */ + build_sync_nego_msg(esp, esp->sync_defp, 15); + esp_dev->sync = 1; + esp->snip = 1; + message_out = EXTENDED_MESSAGE; + } + } else if (esp->cur_msgin[2] == EXTENDED_MODIFY_DATA_POINTER) { + ESPLOG(("esp%d: rejecting modify data ptr msg\n", esp->esp_id)); + message_out = MESSAGE_REJECT; + } +finish: + esp_advance_phase(SCptr, in_the_dark); + return message_out; +} + +static int esp_do_msgindone(struct esp *esp) +{ + struct scsi_cmnd *SCptr = esp->current_SC; + int message_out = 0, it = 0, rval; + + rval = skipahead1(esp, SCptr, in_msgin, in_msgindone); + if (rval) + return rval; + if (SCptr->SCp.sent_command != in_status) { + if (!(esp->ireg & ESP_INTR_DC)) { + if (esp->msgin_len && (esp->sreg & ESP_STAT_PERR)) { + message_out = MSG_PARITY_ERROR; + esp_cmd(esp, ESP_CMD_FLUSH); + } else if (esp->erev != fashme && + (it = (sbus_readb(esp->eregs + ESP_FFLAGS) & ESP_FF_FBYTES)) != 1) { + /* We certainly dropped the ball somewhere. */ + message_out = INITIATOR_ERROR; + esp_cmd(esp, ESP_CMD_FLUSH); + } else if (!esp->msgin_len) { + if (esp->erev == fashme) + it = esp->hme_fifo_workaround_buffer[0]; + else + it = sbus_readb(esp->eregs + ESP_FDATA); + esp_advance_phase(SCptr, in_msgincont); + } else { + /* it is ok and we want it */ + if (esp->erev == fashme) + it = esp->cur_msgin[esp->msgin_ctr] = + esp->hme_fifo_workaround_buffer[0]; + else + it = esp->cur_msgin[esp->msgin_ctr] = + sbus_readb(esp->eregs + ESP_FDATA); + esp->msgin_ctr++; + } + } else { + esp_advance_phase(SCptr, in_the_dark); + return do_work_bus; + } + } else { + it = esp->cur_msgin[0]; + } + if (!message_out && esp->msgin_len) { + if (esp->msgin_ctr < esp->msgin_len) { + esp_advance_phase(SCptr, in_msgincont); + } else if (esp->msgin_len == 1) { + message_out = check_singlebyte_msg(esp); + } else if (esp->msgin_len == 2) { + if (esp->cur_msgin[0] == EXTENDED_MESSAGE) { + if ((it + 2) >= 15) { + message_out = MESSAGE_REJECT; + } else { + esp->msgin_len = (it + 2); + esp_advance_phase(SCptr, in_msgincont); + } + } else { + message_out = MESSAGE_REJECT; /* foo on you */ + } + } else { + message_out = check_multibyte_msg(esp); + } + } + if (message_out < 0) { + return -message_out; + } else if (message_out) { + if (((message_out != 1) && + ((message_out < 0x20) || (message_out & 0x80)))) + esp->msgout_len = 1; + esp->cur_msgout[0] = message_out; + esp_cmd(esp, ESP_CMD_SATN); + esp_advance_phase(SCptr, in_the_dark); + esp->msgin_len = 0; + } + esp->sreg = sbus_readb(esp->eregs + ESP_STATUS); + esp->sreg &= ~(ESP_STAT_INTR); + if ((esp->sreg & (ESP_STAT_PMSG|ESP_STAT_PCD)) == (ESP_STAT_PMSG|ESP_STAT_PCD)) + esp_cmd(esp, ESP_CMD_MOK); + if ((SCptr->SCp.sent_command == in_msgindone) && + (SCptr->SCp.phase == in_freeing)) + return esp_do_freebus(esp); + return do_intr_end; +} + +static int esp_do_cmdbegin(struct esp *esp) +{ + struct scsi_cmnd *SCptr = esp->current_SC; + + esp_advance_phase(SCptr, in_cmdend); + if (esp->erev == fashme) { + u32 tmp = sbus_readl(esp->dregs + DMA_CSR); + int i; + + for (i = 0; i < esp->esp_scmdleft; i++) + esp->esp_command[i] = *esp->esp_scmdp++; + esp->esp_scmdleft = 0; + esp_cmd(esp, ESP_CMD_FLUSH); + esp_setcount(esp->eregs, i, 1); + esp_cmd(esp, (ESP_CMD_DMA | ESP_CMD_TI)); + tmp |= (DMA_SCSI_DISAB | DMA_ENABLE); + tmp &= ~(DMA_ST_WRITE); + sbus_writel(i, esp->dregs + DMA_COUNT); + sbus_writel(esp->esp_command_dvma, esp->dregs + DMA_ADDR); + sbus_writel(tmp, esp->dregs + DMA_CSR); + } else { + u8 tmp; + + esp_cmd(esp, ESP_CMD_FLUSH); + tmp = *esp->esp_scmdp++; + esp->esp_scmdleft--; + sbus_writeb(tmp, esp->eregs + ESP_FDATA); + esp_cmd(esp, ESP_CMD_TI); + } + return do_intr_end; +} + +static int esp_do_cmddone(struct esp *esp) +{ + if (esp->erev == fashme) + dma_invalidate(esp); + else + esp_cmd(esp, ESP_CMD_NULL); + + if (esp->ireg & ESP_INTR_BSERV) { + esp_advance_phase(esp->current_SC, in_the_dark); + return esp_do_phase_determine(esp); + } + + ESPLOG(("esp%d: in do_cmddone() but didn't get BSERV interrupt.\n", + esp->esp_id)); + return do_reset_bus; +} + +static int esp_do_msgout(struct esp *esp) +{ + esp_cmd(esp, ESP_CMD_FLUSH); + switch (esp->msgout_len) { + case 1: + if (esp->erev == fashme) + hme_fifo_push(esp, &esp->cur_msgout[0], 1); + else + sbus_writeb(esp->cur_msgout[0], esp->eregs + ESP_FDATA); + + esp_cmd(esp, ESP_CMD_TI); + break; + + case 2: + esp->esp_command[0] = esp->cur_msgout[0]; + esp->esp_command[1] = esp->cur_msgout[1]; + + if (esp->erev == fashme) { + hme_fifo_push(esp, &esp->cur_msgout[0], 2); + esp_cmd(esp, ESP_CMD_TI); + } else { + dma_setup(esp, esp->esp_command_dvma, 2, 0); + esp_setcount(esp->eregs, 2, 0); + esp_cmd(esp, ESP_CMD_DMA | ESP_CMD_TI); + } + break; + + case 4: + esp->esp_command[0] = esp->cur_msgout[0]; + esp->esp_command[1] = esp->cur_msgout[1]; + esp->esp_command[2] = esp->cur_msgout[2]; + esp->esp_command[3] = esp->cur_msgout[3]; + esp->snip = 1; + + if (esp->erev == fashme) { + hme_fifo_push(esp, &esp->cur_msgout[0], 4); + esp_cmd(esp, ESP_CMD_TI); + } else { + dma_setup(esp, esp->esp_command_dvma, 4, 0); + esp_setcount(esp->eregs, 4, 0); + esp_cmd(esp, ESP_CMD_DMA | ESP_CMD_TI); + } + break; + + case 5: + esp->esp_command[0] = esp->cur_msgout[0]; + esp->esp_command[1] = esp->cur_msgout[1]; + esp->esp_command[2] = esp->cur_msgout[2]; + esp->esp_command[3] = esp->cur_msgout[3]; + esp->esp_command[4] = esp->cur_msgout[4]; + esp->snip = 1; + + if (esp->erev == fashme) { + hme_fifo_push(esp, &esp->cur_msgout[0], 5); + esp_cmd(esp, ESP_CMD_TI); + } else { + dma_setup(esp, esp->esp_command_dvma, 5, 0); + esp_setcount(esp->eregs, 5, 0); + esp_cmd(esp, ESP_CMD_DMA | ESP_CMD_TI); + } + break; + + default: + /* whoops */ + ESPMISC(("bogus msgout sending NOP\n")); + esp->cur_msgout[0] = NOP; + + if (esp->erev == fashme) { + hme_fifo_push(esp, &esp->cur_msgout[0], 1); + } else { + sbus_writeb(esp->cur_msgout[0], esp->eregs + ESP_FDATA); + } + + esp->msgout_len = 1; + esp_cmd(esp, ESP_CMD_TI); + break; + }; + + esp_advance_phase(esp->current_SC, in_msgoutdone); + return do_intr_end; +} + +static int esp_do_msgoutdone(struct esp *esp) +{ + if (esp->msgout_len > 1) { + /* XXX HME/FAS ATN deassert workaround required, + * XXX no DMA flushing, only possible ESP_CMD_FLUSH + * XXX to kill the fifo. + */ + if (esp->erev != fashme) { + u32 tmp; + + while ((tmp = sbus_readl(esp->dregs + DMA_CSR)) & DMA_PEND_READ) + udelay(1); + tmp &= ~DMA_ENABLE; + sbus_writel(tmp, esp->dregs + DMA_CSR); + dma_invalidate(esp); + } else { + esp_cmd(esp, ESP_CMD_FLUSH); + } + } + if (!(esp->ireg & ESP_INTR_DC)) { + if (esp->erev != fashme) + esp_cmd(esp, ESP_CMD_NULL); + switch (esp->sreg & ESP_STAT_PMASK) { + case ESP_MOP: + /* whoops, parity error */ + ESPLOG(("esp%d: still in msgout, parity error assumed\n", + esp->esp_id)); + if (esp->msgout_len > 1) + esp_cmd(esp, ESP_CMD_SATN); + esp_advance_phase(esp->current_SC, in_msgout); + return do_work_bus; + + case ESP_DIP: + break; + + default: + /* Happy Meal fifo is touchy... */ + if ((esp->erev != fashme) && + !fcount(esp) && + !(((struct esp_device *)esp->current_SC->device->hostdata)->sync_max_offset)) + esp_cmd(esp, ESP_CMD_FLUSH); + break; + + }; + } else { + ESPLOG(("esp%d: disconnect, resetting bus\n", esp->esp_id)); + return do_reset_bus; + } + + /* If we sent out a synchronous negotiation message, update + * our state. + */ + if (esp->cur_msgout[2] == EXTENDED_MESSAGE && + esp->cur_msgout[4] == EXTENDED_SDTR) { + esp->snip = 1; /* anal retentiveness... */ + } + + esp->prevmsgout = esp->cur_msgout[0]; + esp->msgout_len = 0; + esp_advance_phase(esp->current_SC, in_the_dark); + return esp_do_phase_determine(esp); +} + +static int esp_bus_unexpected(struct esp *esp) +{ + ESPLOG(("esp%d: command in weird state %2x\n", + esp->esp_id, esp->current_SC->SCp.phase)); + return do_reset_bus; +} + +static espfunc_t bus_vector[] = { + esp_do_data_finale, + esp_do_data_finale, + esp_bus_unexpected, + esp_do_msgin, + esp_do_msgincont, + esp_do_msgindone, + esp_do_msgout, + esp_do_msgoutdone, + esp_do_cmdbegin, + esp_do_cmddone, + esp_do_status, + esp_do_freebus, + esp_do_phase_determine, + esp_bus_unexpected, + esp_bus_unexpected, + esp_bus_unexpected, +}; + +/* This is the second tier in our dual-level SCSI state machine. */ +static int esp_work_bus(struct esp *esp) +{ + struct scsi_cmnd *SCptr = esp->current_SC; + unsigned int phase; + + ESPBUS(("esp_work_bus: ")); + if (!SCptr) { + ESPBUS(("reconnect\n")); + return esp_do_reconnect(esp); + } + phase = SCptr->SCp.phase; + if ((phase & 0xf0) == in_phases_mask) + return bus_vector[(phase & 0x0f)](esp); + else if ((phase & 0xf0) == in_slct_mask) + return esp_select_complete(esp); + else + return esp_bus_unexpected(esp); +} + +static espfunc_t isvc_vector[] = { + 0, + esp_do_phase_determine, + esp_do_resetbus, + esp_finish_reset, + esp_work_bus +}; + +/* Main interrupt handler for an esp adapter. */ +static void esp_handle(struct esp *esp) +{ + struct scsi_cmnd *SCptr; + int what_next = do_intr_end; + + SCptr = esp->current_SC; + + /* Check for errors. */ + esp->sreg = sbus_readb(esp->eregs + ESP_STATUS); + esp->sreg &= (~ESP_STAT_INTR); + if (esp->erev == fashme) { + esp->sreg2 = sbus_readb(esp->eregs + ESP_STATUS2); + esp->seqreg = (sbus_readb(esp->eregs + ESP_SSTEP) & ESP_STEP_VBITS); + } + + if (esp->sreg & (ESP_STAT_SPAM)) { + /* Gross error, could be due to one of: + * + * - top of fifo overwritten, could be because + * we tried to do a synchronous transfer with + * an offset greater than ESP fifo size + * + * - top of command register overwritten + * + * - DMA setup to go in one direction, SCSI + * bus points in the other, whoops + * + * - weird phase change during asynchronous + * data phase while we are initiator + */ + ESPLOG(("esp%d: Gross error sreg=%2x\n", esp->esp_id, esp->sreg)); + + /* If a command is live on the bus we cannot safely + * reset the bus, so we'll just let the pieces fall + * where they may. Here we are hoping that the + * target will be able to cleanly go away soon + * so we can safely reset things. + */ + if (!SCptr) { + ESPLOG(("esp%d: No current cmd during gross error, " + "resetting bus\n", esp->esp_id)); + what_next = do_reset_bus; + goto state_machine; + } + } + + if (sbus_readl(esp->dregs + DMA_CSR) & DMA_HNDL_ERROR) { + /* A DMA gate array error. Here we must + * be seeing one of two things. Either the + * virtual to physical address translation + * on the SBUS could not occur, else the + * translation it did get pointed to a bogus + * page. Ho hum... + */ + ESPLOG(("esp%d: DMA error %08x\n", esp->esp_id, + sbus_readl(esp->dregs + DMA_CSR))); + + /* DMA gate array itself must be reset to clear the + * error condition. + */ + esp_reset_dma(esp); + + what_next = do_reset_bus; + goto state_machine; + } + + esp->ireg = sbus_readb(esp->eregs + ESP_INTRPT); /* Unlatch intr reg */ + + if (esp->erev == fashme) { + /* This chip is really losing. */ + ESPHME(("HME[")); + + ESPHME(("sreg2=%02x,", esp->sreg2)); + /* Must latch fifo before reading the interrupt + * register else garbage ends up in the FIFO + * which confuses the driver utterly. + */ + if (!(esp->sreg2 & ESP_STAT2_FEMPTY) || + (esp->sreg2 & ESP_STAT2_F1BYTE)) { + ESPHME(("fifo_workaround]")); + hme_fifo_read(esp); + } else { + ESPHME(("no_fifo_workaround]")); + } + } + + /* No current cmd is only valid at this point when there are + * commands off the bus or we are trying a reset. + */ + if (!SCptr && !esp->disconnected_SC && !(esp->ireg & ESP_INTR_SR)) { + /* Panic is safe, since current_SC is null. */ + ESPLOG(("esp%d: no command in esp_handle()\n", esp->esp_id)); + panic("esp_handle: current_SC == penguin within interrupt!"); + } + + if (esp->ireg & (ESP_INTR_IC)) { + /* Illegal command fed to ESP. Outside of obvious + * software bugs that could cause this, there is + * a condition with esp100 where we can confuse the + * ESP into an erroneous illegal command interrupt + * because it does not scrape the FIFO properly + * for reselection. See esp100_reconnect_hwbug() + * to see how we try very hard to avoid this. + */ + ESPLOG(("esp%d: invalid command\n", esp->esp_id)); + + esp_dump_state(esp); + + if (SCptr != NULL) { + /* Devices with very buggy firmware can drop BSY + * during a scatter list interrupt when using sync + * mode transfers. We continue the transfer as + * expected, the target drops the bus, the ESP + * gets confused, and we get a illegal command + * interrupt because the bus is in the disconnected + * state now and ESP_CMD_TI is only allowed when + * a nexus is alive on the bus. + */ + ESPLOG(("esp%d: Forcing async and disabling disconnect for " + "target %d\n", esp->esp_id, SCptr->device->id)); + SCptr->device->borken = 1; /* foo on you */ + } + + what_next = do_reset_bus; + } else if (!(esp->ireg & ~(ESP_INTR_FDONE | ESP_INTR_BSERV | ESP_INTR_DC))) { + if (SCptr) { + unsigned int phase = SCptr->SCp.phase; + + if (phase & in_phases_mask) { + what_next = esp_work_bus(esp); + } else if (phase & in_slct_mask) { + what_next = esp_select_complete(esp); + } else { + ESPLOG(("esp%d: interrupt for no good reason...\n", + esp->esp_id)); + what_next = do_intr_end; + } + } else { + ESPLOG(("esp%d: BSERV or FDONE or DC while SCptr==NULL\n", + esp->esp_id)); + what_next = do_reset_bus; + } + } else if (esp->ireg & ESP_INTR_SR) { + ESPLOG(("esp%d: SCSI bus reset interrupt\n", esp->esp_id)); + what_next = do_reset_complete; + } else if (esp->ireg & (ESP_INTR_S | ESP_INTR_SATN)) { + ESPLOG(("esp%d: AIEEE we have been selected by another initiator!\n", + esp->esp_id)); + what_next = do_reset_bus; + } else if (esp->ireg & ESP_INTR_RSEL) { + if (SCptr == NULL) { + /* This is ok. */ + what_next = esp_do_reconnect(esp); + } else if (SCptr->SCp.phase & in_slct_mask) { + /* Only selection code knows how to clean + * up properly. + */ + ESPDISC(("Reselected during selection attempt\n")); + what_next = esp_select_complete(esp); + } else { + ESPLOG(("esp%d: Reselected while bus is busy\n", + esp->esp_id)); + what_next = do_reset_bus; + } + } + + /* This is tier-one in our dual level SCSI state machine. */ +state_machine: + while (what_next != do_intr_end) { + if (what_next >= do_phase_determine && + what_next < do_intr_end) { + what_next = isvc_vector[what_next](esp); + } else { + /* state is completely lost ;-( */ + ESPLOG(("esp%d: interrupt engine loses state, resetting bus\n", + esp->esp_id)); + what_next = do_reset_bus; + } + } +} + +/* Service only the ESP described by dev_id. */ +static irqreturn_t esp_intr(int irq, void *dev_id, struct pt_regs *pregs) +{ + struct esp *esp = dev_id; + unsigned long flags; + + spin_lock_irqsave(esp->ehost->host_lock, flags); + if (ESP_IRQ_P(esp->dregs)) { + ESP_INTSOFF(esp->dregs); + + ESPIRQ(("I[%d:%d](", smp_processor_id(), esp->esp_id)); + esp_handle(esp); + ESPIRQ((")")); + + ESP_INTSON(esp->dregs); + } + spin_unlock_irqrestore(esp->ehost->host_lock, flags); + + return IRQ_HANDLED; +} + +static int esp_slave_alloc(struct scsi_device *SDptr) +{ + struct esp_device *esp_dev = + kmalloc(sizeof(struct esp_device), GFP_ATOMIC); + + if (!esp_dev) + return -ENOMEM; + memset(esp_dev, 0, sizeof(struct esp_device)); + SDptr->hostdata = esp_dev; + return 0; +} + +static void esp_slave_destroy(struct scsi_device *SDptr) +{ + struct esp *esp = (struct esp *) SDptr->host->hostdata; + + esp->targets_present &= ~(1 << SDptr->id); + kfree(SDptr->hostdata); + SDptr->hostdata = NULL; +} + +static struct scsi_host_template driver_template = { + .proc_name = "esp", + .proc_info = esp_proc_info, + .name = "Sun ESP 100/100a/200", + .detect = esp_detect, + .slave_alloc = esp_slave_alloc, + .slave_destroy = esp_slave_destroy, + .release = esp_release, + .info = esp_info, + .queuecommand = esp_queue, + .eh_abort_handler = esp_abort, + .eh_bus_reset_handler = esp_reset, + .can_queue = 7, + .this_id = 7, + .sg_tablesize = SG_ALL, + .cmd_per_lun = 1, + .use_clustering = ENABLE_CLUSTERING, +}; + +#include "scsi_module.c" + +MODULE_LICENSE("GPL"); + |