summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/qlogicpti.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/qlogicpti.c')
-rw-r--r--drivers/scsi/qlogicpti.c1541
1 files changed, 1541 insertions, 0 deletions
diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c
new file mode 100644
index 000000000000..a917ab7475ac
--- /dev/null
+++ b/drivers/scsi/qlogicpti.c
@@ -0,0 +1,1541 @@
+/* qlogicpti.c: Performance Technologies QlogicISP sbus card driver.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caipfs.rutgers.edu)
+ *
+ * A lot of this driver was directly stolen from Erik H. Moe's PCI
+ * Qlogic ISP driver. Mucho kudos to him for this code.
+ *
+ * An even bigger kudos to John Grana at Performance Technologies
+ * for providing me with the hardware to write this driver, you rule
+ * John you really do.
+ *
+ * May, 2, 1997: Added support for QLGC,isp --jj
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/blkdev.h>
+#include <linux/proc_fs.h>
+#include <linux/stat.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+
+#include <asm/byteorder.h>
+
+#include "qlogicpti.h"
+
+#include <asm/sbus.h>
+#include <asm/dma.h>
+#include <asm/system.h>
+#include <asm/ptrace.h>
+#include <asm/pgtable.h>
+#include <asm/oplib.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_request.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsi_host.h>
+
+
+
+#define MAX_TARGETS 16
+#define MAX_LUNS 8 /* 32 for 1.31 F/W */
+
+#define DEFAULT_LOOP_COUNT 10000
+
+#include "qlogicpti_asm.c"
+
+static struct qlogicpti *qptichain = NULL;
+static DEFINE_SPINLOCK(qptichain_lock);
+static int qptis_running = 0;
+
+#define PACKB(a, b) (((a)<<4)|(b))
+
+static const u_char mbox_param[] = {
+ PACKB(1, 1), /* MBOX_NO_OP */
+ PACKB(5, 5), /* MBOX_LOAD_RAM */
+ PACKB(2, 0), /* MBOX_EXEC_FIRMWARE */
+ PACKB(5, 5), /* MBOX_DUMP_RAM */
+ PACKB(3, 3), /* MBOX_WRITE_RAM_WORD */
+ PACKB(2, 3), /* MBOX_READ_RAM_WORD */
+ PACKB(6, 6), /* MBOX_MAILBOX_REG_TEST */
+ PACKB(2, 3), /* MBOX_VERIFY_CHECKSUM */
+ PACKB(1, 3), /* MBOX_ABOUT_FIRMWARE */
+ PACKB(0, 0), /* 0x0009 */
+ PACKB(0, 0), /* 0x000a */
+ PACKB(0, 0), /* 0x000b */
+ PACKB(0, 0), /* 0x000c */
+ PACKB(0, 0), /* 0x000d */
+ PACKB(1, 2), /* MBOX_CHECK_FIRMWARE */
+ PACKB(0, 0), /* 0x000f */
+ PACKB(5, 5), /* MBOX_INIT_REQ_QUEUE */
+ PACKB(6, 6), /* MBOX_INIT_RES_QUEUE */
+ PACKB(4, 4), /* MBOX_EXECUTE_IOCB */
+ PACKB(2, 2), /* MBOX_WAKE_UP */
+ PACKB(1, 6), /* MBOX_STOP_FIRMWARE */
+ PACKB(4, 4), /* MBOX_ABORT */
+ PACKB(2, 2), /* MBOX_ABORT_DEVICE */
+ PACKB(3, 3), /* MBOX_ABORT_TARGET */
+ PACKB(2, 2), /* MBOX_BUS_RESET */
+ PACKB(2, 3), /* MBOX_STOP_QUEUE */
+ PACKB(2, 3), /* MBOX_START_QUEUE */
+ PACKB(2, 3), /* MBOX_SINGLE_STEP_QUEUE */
+ PACKB(2, 3), /* MBOX_ABORT_QUEUE */
+ PACKB(2, 4), /* MBOX_GET_DEV_QUEUE_STATUS */
+ PACKB(0, 0), /* 0x001e */
+ PACKB(1, 3), /* MBOX_GET_FIRMWARE_STATUS */
+ PACKB(1, 2), /* MBOX_GET_INIT_SCSI_ID */
+ PACKB(1, 2), /* MBOX_GET_SELECT_TIMEOUT */
+ PACKB(1, 3), /* MBOX_GET_RETRY_COUNT */
+ PACKB(1, 2), /* MBOX_GET_TAG_AGE_LIMIT */
+ PACKB(1, 2), /* MBOX_GET_CLOCK_RATE */
+ PACKB(1, 2), /* MBOX_GET_ACT_NEG_STATE */
+ PACKB(1, 2), /* MBOX_GET_ASYNC_DATA_SETUP_TIME */
+ PACKB(1, 3), /* MBOX_GET_SBUS_PARAMS */
+ PACKB(2, 4), /* MBOX_GET_TARGET_PARAMS */
+ PACKB(2, 4), /* MBOX_GET_DEV_QUEUE_PARAMS */
+ PACKB(0, 0), /* 0x002a */
+ PACKB(0, 0), /* 0x002b */
+ PACKB(0, 0), /* 0x002c */
+ PACKB(0, 0), /* 0x002d */
+ PACKB(0, 0), /* 0x002e */
+ PACKB(0, 0), /* 0x002f */
+ PACKB(2, 2), /* MBOX_SET_INIT_SCSI_ID */
+ PACKB(2, 2), /* MBOX_SET_SELECT_TIMEOUT */
+ PACKB(3, 3), /* MBOX_SET_RETRY_COUNT */
+ PACKB(2, 2), /* MBOX_SET_TAG_AGE_LIMIT */
+ PACKB(2, 2), /* MBOX_SET_CLOCK_RATE */
+ PACKB(2, 2), /* MBOX_SET_ACTIVE_NEG_STATE */
+ PACKB(2, 2), /* MBOX_SET_ASYNC_DATA_SETUP_TIME */
+ PACKB(3, 3), /* MBOX_SET_SBUS_CONTROL_PARAMS */
+ PACKB(4, 4), /* MBOX_SET_TARGET_PARAMS */
+ PACKB(4, 4), /* MBOX_SET_DEV_QUEUE_PARAMS */
+ PACKB(0, 0), /* 0x003a */
+ PACKB(0, 0), /* 0x003b */
+ PACKB(0, 0), /* 0x003c */
+ PACKB(0, 0), /* 0x003d */
+ PACKB(0, 0), /* 0x003e */
+ PACKB(0, 0), /* 0x003f */
+ PACKB(0, 0), /* 0x0040 */
+ PACKB(0, 0), /* 0x0041 */
+ PACKB(0, 0) /* 0x0042 */
+};
+
+#define MAX_MBOX_COMMAND (sizeof(mbox_param)/sizeof(u_short))
+
+/* queue length's _must_ be power of two: */
+#define QUEUE_DEPTH(in, out, ql) ((in - out) & (ql))
+#define REQ_QUEUE_DEPTH(in, out) QUEUE_DEPTH(in, out, \
+ QLOGICPTI_REQ_QUEUE_LEN)
+#define RES_QUEUE_DEPTH(in, out) QUEUE_DEPTH(in, out, RES_QUEUE_LEN)
+
+static inline void qlogicpti_enable_irqs(struct qlogicpti *qpti)
+{
+ sbus_writew(SBUS_CTRL_ERIRQ | SBUS_CTRL_GENAB,
+ qpti->qregs + SBUS_CTRL);
+}
+
+static inline void qlogicpti_disable_irqs(struct qlogicpti *qpti)
+{
+ sbus_writew(0, qpti->qregs + SBUS_CTRL);
+}
+
+static inline void set_sbus_cfg1(struct qlogicpti *qpti)
+{
+ u16 val;
+ u8 bursts = qpti->bursts;
+
+#if 0 /* It appears that at least PTI cards do not support
+ * 64-byte bursts and that setting the B64 bit actually
+ * is a nop and the chip ends up using the smallest burst
+ * size. -DaveM
+ */
+ if (sbus_can_burst64(qpti->sdev) && (bursts & DMA_BURST64)) {
+ val = (SBUS_CFG1_BENAB | SBUS_CFG1_B64);
+ } else
+#endif
+ if (bursts & DMA_BURST32) {
+ val = (SBUS_CFG1_BENAB | SBUS_CFG1_B32);
+ } else if (bursts & DMA_BURST16) {
+ val = (SBUS_CFG1_BENAB | SBUS_CFG1_B16);
+ } else if (bursts & DMA_BURST8) {
+ val = (SBUS_CFG1_BENAB | SBUS_CFG1_B8);
+ } else {
+ val = 0; /* No sbus bursts for you... */
+ }
+ sbus_writew(val, qpti->qregs + SBUS_CFG1);
+}
+
+static int qlogicpti_mbox_command(struct qlogicpti *qpti, u_short param[], int force)
+{
+ int loop_count;
+ u16 tmp;
+
+ if (mbox_param[param[0]] == 0)
+ return 1;
+
+ /* Set SBUS semaphore. */
+ tmp = sbus_readw(qpti->qregs + SBUS_SEMAPHORE);
+ tmp |= SBUS_SEMAPHORE_LCK;
+ sbus_writew(tmp, qpti->qregs + SBUS_SEMAPHORE);
+
+ /* Wait for host IRQ bit to clear. */
+ loop_count = DEFAULT_LOOP_COUNT;
+ while (--loop_count && (sbus_readw(qpti->qregs + HCCTRL) & HCCTRL_HIRQ)) {
+ barrier();
+ cpu_relax();
+ }
+ if (!loop_count)
+ printk(KERN_EMERG "qlogicpti: mbox_command loop timeout #1\n");
+
+ /* Write mailbox command registers. */
+ switch (mbox_param[param[0]] >> 4) {
+ case 6: sbus_writew(param[5], qpti->qregs + MBOX5);
+ case 5: sbus_writew(param[4], qpti->qregs + MBOX4);
+ case 4: sbus_writew(param[3], qpti->qregs + MBOX3);
+ case 3: sbus_writew(param[2], qpti->qregs + MBOX2);
+ case 2: sbus_writew(param[1], qpti->qregs + MBOX1);
+ case 1: sbus_writew(param[0], qpti->qregs + MBOX0);
+ }
+
+ /* Clear RISC interrupt. */
+ tmp = sbus_readw(qpti->qregs + HCCTRL);
+ tmp |= HCCTRL_CRIRQ;
+ sbus_writew(tmp, qpti->qregs + HCCTRL);
+
+ /* Clear SBUS semaphore. */
+ sbus_writew(0, qpti->qregs + SBUS_SEMAPHORE);
+
+ /* Set HOST interrupt. */
+ tmp = sbus_readw(qpti->qregs + HCCTRL);
+ tmp |= HCCTRL_SHIRQ;
+ sbus_writew(tmp, qpti->qregs + HCCTRL);
+
+ /* Wait for HOST interrupt clears. */
+ loop_count = DEFAULT_LOOP_COUNT;
+ while (--loop_count &&
+ (sbus_readw(qpti->qregs + HCCTRL) & HCCTRL_CRIRQ))
+ udelay(20);
+ if (!loop_count)
+ printk(KERN_EMERG "qlogicpti: mbox_command[%04x] loop timeout #2\n",
+ param[0]);
+
+ /* Wait for SBUS semaphore to get set. */
+ loop_count = DEFAULT_LOOP_COUNT;
+ while (--loop_count &&
+ !(sbus_readw(qpti->qregs + SBUS_SEMAPHORE) & SBUS_SEMAPHORE_LCK)) {
+ udelay(20);
+
+ /* Workaround for some buggy chips. */
+ if (sbus_readw(qpti->qregs + MBOX0) & 0x4000)
+ break;
+ }
+ if (!loop_count)
+ printk(KERN_EMERG "qlogicpti: mbox_command[%04x] loop timeout #3\n",
+ param[0]);
+
+ /* Wait for MBOX busy condition to go away. */
+ loop_count = DEFAULT_LOOP_COUNT;
+ while (--loop_count && (sbus_readw(qpti->qregs + MBOX0) == 0x04))
+ udelay(20);
+ if (!loop_count)
+ printk(KERN_EMERG "qlogicpti: mbox_command[%04x] loop timeout #4\n",
+ param[0]);
+
+ /* Read back output parameters. */
+ switch (mbox_param[param[0]] & 0xf) {
+ case 6: param[5] = sbus_readw(qpti->qregs + MBOX5);
+ case 5: param[4] = sbus_readw(qpti->qregs + MBOX4);
+ case 4: param[3] = sbus_readw(qpti->qregs + MBOX3);
+ case 3: param[2] = sbus_readw(qpti->qregs + MBOX2);
+ case 2: param[1] = sbus_readw(qpti->qregs + MBOX1);
+ case 1: param[0] = sbus_readw(qpti->qregs + MBOX0);
+ }
+
+ /* Clear RISC interrupt. */
+ tmp = sbus_readw(qpti->qregs + HCCTRL);
+ tmp |= HCCTRL_CRIRQ;
+ sbus_writew(tmp, qpti->qregs + HCCTRL);
+
+ /* Release SBUS semaphore. */
+ tmp = sbus_readw(qpti->qregs + SBUS_SEMAPHORE);
+ tmp &= ~(SBUS_SEMAPHORE_LCK);
+ sbus_writew(tmp, qpti->qregs + SBUS_SEMAPHORE);
+
+ /* We're done. */
+ return 0;
+}
+
+static inline void qlogicpti_set_hostdev_defaults(struct qlogicpti *qpti)
+{
+ int i;
+
+ qpti->host_param.initiator_scsi_id = qpti->scsi_id;
+ qpti->host_param.bus_reset_delay = 3;
+ qpti->host_param.retry_count = 0;
+ qpti->host_param.retry_delay = 5;
+ qpti->host_param.async_data_setup_time = 3;
+ qpti->host_param.req_ack_active_negation = 1;
+ qpti->host_param.data_line_active_negation = 1;
+ qpti->host_param.data_dma_burst_enable = 1;
+ qpti->host_param.command_dma_burst_enable = 1;
+ qpti->host_param.tag_aging = 8;
+ qpti->host_param.selection_timeout = 250;
+ qpti->host_param.max_queue_depth = 256;
+
+ for(i = 0; i < MAX_TARGETS; i++) {
+ /*
+ * disconnect, parity, arq, reneg on reset, and, oddly enough
+ * tags...the midlayer's notion of tagged support has to match
+ * our device settings, and since we base whether we enable a
+ * tag on a per-cmnd basis upon what the midlayer sez, we
+ * actually enable the capability here.
+ */
+ qpti->dev_param[i].device_flags = 0xcd;
+ qpti->dev_param[i].execution_throttle = 16;
+ if (qpti->ultra) {
+ qpti->dev_param[i].synchronous_period = 12;
+ qpti->dev_param[i].synchronous_offset = 8;
+ } else {
+ qpti->dev_param[i].synchronous_period = 25;
+ qpti->dev_param[i].synchronous_offset = 12;
+ }
+ qpti->dev_param[i].device_enable = 1;
+ }
+ /* this is very important to set! */
+ qpti->sbits = 1 << qpti->scsi_id;
+}
+
+static int qlogicpti_reset_hardware(struct Scsi_Host *host)
+{
+ struct qlogicpti *qpti = (struct qlogicpti *) host->hostdata;
+ u_short param[6];
+ unsigned short risc_code_addr;
+ int loop_count, i;
+ unsigned long flags;
+
+ risc_code_addr = 0x1000; /* all load addresses are at 0x1000 */
+
+ spin_lock_irqsave(host->host_lock, flags);
+
+ sbus_writew(HCCTRL_PAUSE, qpti->qregs + HCCTRL);
+
+ /* Only reset the scsi bus if it is not free. */
+ if (sbus_readw(qpti->qregs + CPU_PCTRL) & CPU_PCTRL_BSY) {
+ sbus_writew(CPU_ORIDE_RMOD, qpti->qregs + CPU_ORIDE);
+ sbus_writew(CPU_CMD_BRESET, qpti->qregs + CPU_CMD);
+ udelay(400);
+ }
+
+ sbus_writew(SBUS_CTRL_RESET, qpti->qregs + SBUS_CTRL);
+ sbus_writew((DMA_CTRL_CCLEAR | DMA_CTRL_CIRQ), qpti->qregs + CMD_DMA_CTRL);
+ sbus_writew((DMA_CTRL_CCLEAR | DMA_CTRL_CIRQ), qpti->qregs + DATA_DMA_CTRL);
+
+ loop_count = DEFAULT_LOOP_COUNT;
+ while (--loop_count && ((sbus_readw(qpti->qregs + MBOX0) & 0xff) == 0x04))
+ udelay(20);
+ if (!loop_count)
+ printk(KERN_EMERG "qlogicpti: reset_hardware loop timeout\n");
+
+ sbus_writew(HCCTRL_PAUSE, qpti->qregs + HCCTRL);
+ set_sbus_cfg1(qpti);
+ qlogicpti_enable_irqs(qpti);
+
+ if (sbus_readw(qpti->qregs + RISC_PSR) & RISC_PSR_ULTRA) {
+ qpti->ultra = 1;
+ sbus_writew((RISC_MTREG_P0ULTRA | RISC_MTREG_P1ULTRA),
+ qpti->qregs + RISC_MTREG);
+ } else {
+ qpti->ultra = 0;
+ sbus_writew((RISC_MTREG_P0DFLT | RISC_MTREG_P1DFLT),
+ qpti->qregs + RISC_MTREG);
+ }
+
+ /* reset adapter and per-device default values. */
+ /* do it after finding out whether we're ultra mode capable */
+ qlogicpti_set_hostdev_defaults(qpti);
+
+ /* Release the RISC processor. */
+ sbus_writew(HCCTRL_REL, qpti->qregs + HCCTRL);
+
+ /* Get RISC to start executing the firmware code. */
+ param[0] = MBOX_EXEC_FIRMWARE;
+ param[1] = risc_code_addr;
+ if (qlogicpti_mbox_command(qpti, param, 1)) {
+ printk(KERN_EMERG "qlogicpti%d: Cannot execute ISP firmware.\n",
+ qpti->qpti_id);
+ spin_unlock_irqrestore(host->host_lock, flags);
+ return 1;
+ }
+
+ /* Set initiator scsi ID. */
+ param[0] = MBOX_SET_INIT_SCSI_ID;
+ param[1] = qpti->host_param.initiator_scsi_id;
+ if (qlogicpti_mbox_command(qpti, param, 1) ||
+ (param[0] != MBOX_COMMAND_COMPLETE)) {
+ printk(KERN_EMERG "qlogicpti%d: Cannot set initiator SCSI ID.\n",
+ qpti->qpti_id);
+ spin_unlock_irqrestore(host->host_lock, flags);
+ return 1;
+ }
+
+ /* Initialize state of the queues, both hw and sw. */
+ qpti->req_in_ptr = qpti->res_out_ptr = 0;
+
+ param[0] = MBOX_INIT_RES_QUEUE;
+ param[1] = RES_QUEUE_LEN + 1;
+ param[2] = (u_short) (qpti->res_dvma >> 16);
+ param[3] = (u_short) (qpti->res_dvma & 0xffff);
+ param[4] = param[5] = 0;
+ if (qlogicpti_mbox_command(qpti, param, 1)) {
+ printk(KERN_EMERG "qlogicpti%d: Cannot init response queue.\n",
+ qpti->qpti_id);
+ spin_unlock_irqrestore(host->host_lock, flags);
+ return 1;
+ }
+
+ param[0] = MBOX_INIT_REQ_QUEUE;
+ param[1] = QLOGICPTI_REQ_QUEUE_LEN + 1;
+ param[2] = (u_short) (qpti->req_dvma >> 16);
+ param[3] = (u_short) (qpti->req_dvma & 0xffff);
+ param[4] = param[5] = 0;
+ if (qlogicpti_mbox_command(qpti, param, 1)) {
+ printk(KERN_EMERG "qlogicpti%d: Cannot init request queue.\n",
+ qpti->qpti_id);
+ spin_unlock_irqrestore(host->host_lock, flags);
+ return 1;
+ }
+
+ param[0] = MBOX_SET_RETRY_COUNT;
+ param[1] = qpti->host_param.retry_count;
+ param[2] = qpti->host_param.retry_delay;
+ qlogicpti_mbox_command(qpti, param, 0);
+
+ param[0] = MBOX_SET_TAG_AGE_LIMIT;
+ param[1] = qpti->host_param.tag_aging;
+ qlogicpti_mbox_command(qpti, param, 0);
+
+ for (i = 0; i < MAX_TARGETS; i++) {
+ param[0] = MBOX_GET_DEV_QUEUE_PARAMS;
+ param[1] = (i << 8);
+ qlogicpti_mbox_command(qpti, param, 0);
+ }
+
+ param[0] = MBOX_GET_FIRMWARE_STATUS;
+ qlogicpti_mbox_command(qpti, param, 0);
+
+ param[0] = MBOX_SET_SELECT_TIMEOUT;
+ param[1] = qpti->host_param.selection_timeout;
+ qlogicpti_mbox_command(qpti, param, 0);
+
+ for (i = 0; i < MAX_TARGETS; i++) {
+ param[0] = MBOX_SET_TARGET_PARAMS;
+ param[1] = (i << 8);
+ param[2] = (qpti->dev_param[i].device_flags << 8);
+ /*
+ * Since we're now loading 1.31 f/w, force narrow/async.
+ */
+ param[2] |= 0xc0;
+ param[3] = 0; /* no offset, we do not have sync mode yet */
+ qlogicpti_mbox_command(qpti, param, 0);
+ }
+
+ /*
+ * Always (sigh) do an initial bus reset (kicks f/w).
+ */
+ param[0] = MBOX_BUS_RESET;
+ param[1] = qpti->host_param.bus_reset_delay;
+ qlogicpti_mbox_command(qpti, param, 0);
+ qpti->send_marker = 1;
+
+ spin_unlock_irqrestore(host->host_lock, flags);
+ return 0;
+}
+
+#define PTI_RESET_LIMIT 400
+
+static int __init qlogicpti_load_firmware(struct qlogicpti *qpti)
+{
+ struct Scsi_Host *host = qpti->qhost;
+ unsigned short csum = 0;
+ unsigned short param[6];
+ unsigned short *risc_code, risc_code_addr, risc_code_length;
+ unsigned long flags;
+ int i, timeout;
+
+ risc_code = &sbus_risc_code01[0];
+ risc_code_addr = 0x1000; /* all f/w modules load at 0x1000 */
+ risc_code_length = sbus_risc_code_length01;
+
+ spin_lock_irqsave(host->host_lock, flags);
+
+ /* Verify the checksum twice, one before loading it, and once
+ * afterwards via the mailbox commands.
+ */
+ for (i = 0; i < risc_code_length; i++)
+ csum += risc_code[i];
+ if (csum) {
+ spin_unlock_irqrestore(host->host_lock, flags);
+ printk(KERN_EMERG "qlogicpti%d: Aieee, firmware checksum failed!",
+ qpti->qpti_id);
+ return 1;
+ }
+ sbus_writew(SBUS_CTRL_RESET, qpti->qregs + SBUS_CTRL);
+ sbus_writew((DMA_CTRL_CCLEAR | DMA_CTRL_CIRQ), qpti->qregs + CMD_DMA_CTRL);
+ sbus_writew((DMA_CTRL_CCLEAR | DMA_CTRL_CIRQ), qpti->qregs + DATA_DMA_CTRL);
+ timeout = PTI_RESET_LIMIT;
+ while (--timeout && (sbus_readw(qpti->qregs + SBUS_CTRL) & SBUS_CTRL_RESET))
+ udelay(20);
+ if (!timeout) {
+ spin_unlock_irqrestore(host->host_lock, flags);
+ printk(KERN_EMERG "qlogicpti%d: Cannot reset the ISP.", qpti->qpti_id);
+ return 1;
+ }
+
+ sbus_writew(HCCTRL_RESET, qpti->qregs + HCCTRL);
+ mdelay(1);
+
+ sbus_writew((SBUS_CTRL_GENAB | SBUS_CTRL_ERIRQ), qpti->qregs + SBUS_CTRL);
+ set_sbus_cfg1(qpti);
+ sbus_writew(0, qpti->qregs + SBUS_SEMAPHORE);
+
+ if (sbus_readw(qpti->qregs + RISC_PSR) & RISC_PSR_ULTRA) {
+ qpti->ultra = 1;
+ sbus_writew((RISC_MTREG_P0ULTRA | RISC_MTREG_P1ULTRA),
+ qpti->qregs + RISC_MTREG);
+ } else {
+ qpti->ultra = 0;
+ sbus_writew((RISC_MTREG_P0DFLT | RISC_MTREG_P1DFLT),
+ qpti->qregs + RISC_MTREG);
+ }
+
+ sbus_writew(HCCTRL_REL, qpti->qregs + HCCTRL);
+
+ /* Pin lines are only stable while RISC is paused. */
+ sbus_writew(HCCTRL_PAUSE, qpti->qregs + HCCTRL);
+ if (sbus_readw(qpti->qregs + CPU_PDIFF) & CPU_PDIFF_MODE)
+ qpti->differential = 1;
+ else
+ qpti->differential = 0;
+ sbus_writew(HCCTRL_REL, qpti->qregs + HCCTRL);
+
+ /* This shouldn't be necessary- we've reset things so we should be
+ running from the ROM now.. */
+
+ param[0] = MBOX_STOP_FIRMWARE;
+ param[1] = param[2] = param[3] = param[4] = param[5] = 0;
+ if (qlogicpti_mbox_command(qpti, param, 1)) {
+ printk(KERN_EMERG "qlogicpti%d: Cannot stop firmware for reload.\n",
+ qpti->qpti_id);
+ spin_unlock_irqrestore(host->host_lock, flags);
+ return 1;
+ }
+
+ /* Load it up.. */
+ for (i = 0; i < risc_code_length; i++) {
+ param[0] = MBOX_WRITE_RAM_WORD;
+ param[1] = risc_code_addr + i;
+ param[2] = risc_code[i];
+ if (qlogicpti_mbox_command(qpti, param, 1) ||
+ param[0] != MBOX_COMMAND_COMPLETE) {
+ printk("qlogicpti%d: Firmware dload failed, I'm bolixed!\n",
+ qpti->qpti_id);
+ spin_unlock_irqrestore(host->host_lock, flags);
+ return 1;
+ }
+ }
+
+ /* Reset the ISP again. */
+ sbus_writew(HCCTRL_RESET, qpti->qregs + HCCTRL);
+ mdelay(1);
+
+ qlogicpti_enable_irqs(qpti);
+ sbus_writew(0, qpti->qregs + SBUS_SEMAPHORE);
+ sbus_writew(HCCTRL_REL, qpti->qregs + HCCTRL);
+
+ /* Ask ISP to verify the checksum of the new code. */
+ param[0] = MBOX_VERIFY_CHECKSUM;
+ param[1] = risc_code_addr;
+ if (qlogicpti_mbox_command(qpti, param, 1) ||
+ (param[0] != MBOX_COMMAND_COMPLETE)) {
+ printk(KERN_EMERG "qlogicpti%d: New firmware csum failure!\n",
+ qpti->qpti_id);
+ spin_unlock_irqrestore(host->host_lock, flags);
+ return 1;
+ }
+
+ /* Start using newly downloaded firmware. */
+ param[0] = MBOX_EXEC_FIRMWARE;
+ param[1] = risc_code_addr;
+ qlogicpti_mbox_command(qpti, param, 1);
+
+ param[0] = MBOX_ABOUT_FIRMWARE;
+ if (qlogicpti_mbox_command(qpti, param, 1) ||
+ (param[0] != MBOX_COMMAND_COMPLETE)) {
+ printk(KERN_EMERG "qlogicpti%d: AboutFirmware cmd fails.\n",
+ qpti->qpti_id);
+ spin_unlock_irqrestore(host->host_lock, flags);
+ return 1;
+ }
+
+ /* Snag the major and minor revisions from the result. */
+ qpti->fware_majrev = param[1];
+ qpti->fware_minrev = param[2];
+ qpti->fware_micrev = param[3];
+
+ /* Set the clock rate */
+ param[0] = MBOX_SET_CLOCK_RATE;
+ param[1] = qpti->clock;
+ if (qlogicpti_mbox_command(qpti, param, 1) ||
+ (param[0] != MBOX_COMMAND_COMPLETE)) {
+ printk(KERN_EMERG "qlogicpti%d: could not set clock rate.\n",
+ qpti->qpti_id);
+ spin_unlock_irqrestore(host->host_lock, flags);
+ return 1;
+ }
+
+ if (qpti->is_pti != 0) {
+ /* Load scsi initiator ID and interrupt level into sbus static ram. */
+ param[0] = MBOX_WRITE_RAM_WORD;
+ param[1] = 0xff80;
+ param[2] = (unsigned short) qpti->scsi_id;
+ qlogicpti_mbox_command(qpti, param, 1);
+
+ param[0] = MBOX_WRITE_RAM_WORD;
+ param[1] = 0xff00;
+ param[2] = (unsigned short) 3;
+ qlogicpti_mbox_command(qpti, param, 1);
+ }
+
+ spin_unlock_irqrestore(host->host_lock, flags);
+ return 0;
+}
+
+static int qlogicpti_verify_tmon(struct qlogicpti *qpti)
+{
+ int curstat = sbus_readb(qpti->sreg);
+
+ curstat &= 0xf0;
+ if (!(curstat & SREG_FUSE) && (qpti->swsreg & SREG_FUSE))
+ printk("qlogicpti%d: Fuse returned to normal state.\n", qpti->qpti_id);
+ if (!(curstat & SREG_TPOWER) && (qpti->swsreg & SREG_TPOWER))
+ printk("qlogicpti%d: termpwr back to normal state.\n", qpti->qpti_id);
+ if (curstat != qpti->swsreg) {
+ int error = 0;
+ if (curstat & SREG_FUSE) {
+ error++;
+ printk("qlogicpti%d: Fuse is open!\n", qpti->qpti_id);
+ }
+ if (curstat & SREG_TPOWER) {
+ error++;
+ printk("qlogicpti%d: termpwr failure\n", qpti->qpti_id);
+ }
+ if (qpti->differential &&
+ (curstat & SREG_DSENSE) != SREG_DSENSE) {
+ error++;
+ printk("qlogicpti%d: You have a single ended device on a "
+ "differential bus! Please fix!\n", qpti->qpti_id);
+ }
+ qpti->swsreg = curstat;
+ return error;
+ }
+ return 0;
+}
+
+static irqreturn_t qpti_intr(int irq, void *dev_id, struct pt_regs *regs);
+
+static void __init qpti_chain_add(struct qlogicpti *qpti)
+{
+ spin_lock_irq(&qptichain_lock);
+ if (qptichain != NULL) {
+ struct qlogicpti *qlink = qptichain;
+
+ while(qlink->next)
+ qlink = qlink->next;
+ qlink->next = qpti;
+ } else {
+ qptichain = qpti;
+ }
+ qpti->next = NULL;
+ spin_unlock_irq(&qptichain_lock);
+}
+
+static void __init qpti_chain_del(struct qlogicpti *qpti)
+{
+ spin_lock_irq(&qptichain_lock);
+ if (qptichain == qpti) {
+ qptichain = qpti->next;
+ } else {
+ struct qlogicpti *qlink = qptichain;
+ while(qlink->next != qpti)
+ qlink = qlink->next;
+ qlink->next = qpti->next;
+ }
+ qpti->next = NULL;
+ spin_unlock_irq(&qptichain_lock);
+}
+
+static int __init qpti_map_regs(struct qlogicpti *qpti)
+{
+ struct sbus_dev *sdev = qpti->sdev;
+
+ qpti->qregs = sbus_ioremap(&sdev->resource[0], 0,
+ sdev->reg_addrs[0].reg_size,
+ "PTI Qlogic/ISP");
+ if (!qpti->qregs) {
+ printk("PTI: Qlogic/ISP registers are unmappable\n");
+ return -1;
+ }
+ if (qpti->is_pti) {
+ qpti->sreg = sbus_ioremap(&sdev->resource[0], (16 * 4096),
+ sizeof(unsigned char),
+ "PTI Qlogic/ISP statreg");
+ if (!qpti->sreg) {
+ printk("PTI: Qlogic/ISP status register is unmappable\n");
+ return -1;
+ }
+ }
+ return 0;
+}
+
+static int __init qpti_register_irq(struct qlogicpti *qpti)
+{
+ struct sbus_dev *sdev = qpti->sdev;
+
+ qpti->qhost->irq = qpti->irq = sdev->irqs[0];
+
+ /* We used to try various overly-clever things to
+ * reduce the interrupt processing overhead on
+ * sun4c/sun4m when multiple PTI's shared the
+ * same IRQ. It was too complex and messy to
+ * sanely maintain.
+ */
+ if (request_irq(qpti->irq, qpti_intr,
+ SA_SHIRQ, "Qlogic/PTI", qpti))
+ goto fail;
+
+ printk("qpti%d: IRQ %s ", qpti->qpti_id, __irq_itoa(qpti->irq));
+
+ return 0;
+
+fail:
+ printk("qpti%d: Cannot acquire irq line\n", qpti->qpti_id);
+ return -1;
+}
+
+static void __init qpti_get_scsi_id(struct qlogicpti *qpti)
+{
+ qpti->scsi_id = prom_getintdefault(qpti->prom_node,
+ "initiator-id",
+ -1);
+ if (qpti->scsi_id == -1)
+ qpti->scsi_id = prom_getintdefault(qpti->prom_node,
+ "scsi-initiator-id",
+ -1);
+ if (qpti->scsi_id == -1)
+ qpti->scsi_id =
+ prom_getintdefault(qpti->sdev->bus->prom_node,
+ "scsi-initiator-id", 7);
+ qpti->qhost->this_id = qpti->scsi_id;
+ qpti->qhost->max_sectors = 64;
+
+ printk("SCSI ID %d ", qpti->scsi_id);
+}
+
+static void qpti_get_bursts(struct qlogicpti *qpti)
+{
+ struct sbus_dev *sdev = qpti->sdev;
+ u8 bursts, bmask;
+
+ bursts = prom_getintdefault(qpti->prom_node, "burst-sizes", 0xff);
+ bmask = prom_getintdefault(sdev->bus->prom_node,
+ "burst-sizes", 0xff);
+ if (bmask != 0xff)
+ bursts &= bmask;
+ if (bursts == 0xff ||
+ (bursts & DMA_BURST16) == 0 ||
+ (bursts & DMA_BURST32) == 0)
+ bursts = (DMA_BURST32 - 1);
+
+ qpti->bursts = bursts;
+}
+
+static void qpti_get_clock(struct qlogicpti *qpti)
+{
+ unsigned int cfreq;
+
+ /* Check for what the clock input to this card is.
+ * Default to 40Mhz.
+ */
+ cfreq = prom_getintdefault(qpti->prom_node,"clock-frequency",40000000);
+ qpti->clock = (cfreq + 500000)/1000000;
+ if (qpti->clock == 0) /* bullshit */
+ qpti->clock = 40;
+}
+
+/* The request and response queues must each be aligned
+ * on a page boundary.
+ */
+static int __init qpti_map_queues(struct qlogicpti *qpti)
+{
+ struct sbus_dev *sdev = qpti->sdev;
+
+#define QSIZE(entries) (((entries) + 1) * QUEUE_ENTRY_LEN)
+ qpti->res_cpu = sbus_alloc_consistent(sdev,
+ QSIZE(RES_QUEUE_LEN),
+ &qpti->res_dvma);
+ if (qpti->res_cpu == NULL ||
+ qpti->res_dvma == 0) {
+ printk("QPTI: Cannot map response queue.\n");
+ return -1;
+ }
+
+ qpti->req_cpu = sbus_alloc_consistent(sdev,
+ QSIZE(QLOGICPTI_REQ_QUEUE_LEN),
+ &qpti->req_dvma);
+ if (qpti->req_cpu == NULL ||
+ qpti->req_dvma == 0) {
+ sbus_free_consistent(sdev, QSIZE(RES_QUEUE_LEN),
+ qpti->res_cpu, qpti->res_dvma);
+ printk("QPTI: Cannot map request queue.\n");
+ return -1;
+ }
+ memset(qpti->res_cpu, 0, QSIZE(RES_QUEUE_LEN));
+ memset(qpti->req_cpu, 0, QSIZE(QLOGICPTI_REQ_QUEUE_LEN));
+ return 0;
+}
+
+/* Detect all PTI Qlogic ISP's in the machine. */
+static int __init qlogicpti_detect(struct scsi_host_template *tpnt)
+{
+ struct qlogicpti *qpti;
+ struct Scsi_Host *qpti_host;
+ struct sbus_bus *sbus;
+ struct sbus_dev *sdev;
+ int nqptis = 0, nqptis_in_use = 0;
+
+ tpnt->proc_name = "qlogicpti";
+ for_each_sbus(sbus) {
+ for_each_sbusdev(sdev, sbus) {
+ /* Is this a red snapper? */
+ if (strcmp(sdev->prom_name, "ptisp") &&
+ strcmp(sdev->prom_name, "PTI,ptisp") &&
+ strcmp(sdev->prom_name, "QLGC,isp") &&
+ strcmp(sdev->prom_name, "SUNW,isp"))
+ continue;
+
+ /* Sometimes Antares cards come up not completely
+ * setup, and we get a report of a zero IRQ.
+ * Skip over them in such cases so we survive.
+ */
+ if (sdev->irqs[0] == 0) {
+ printk("qpti%d: Adapter reports no interrupt, "
+ "skipping over this card.", nqptis);
+ continue;
+ }
+
+ /* Yep, register and allocate software state. */
+ qpti_host = scsi_register(tpnt, sizeof(struct qlogicpti));
+ if (!qpti_host) {
+ printk("QPTI: Cannot register PTI Qlogic ISP SCSI host");
+ continue;
+ }
+ qpti = (struct qlogicpti *) qpti_host->hostdata;
+
+ /* We are wide capable, 16 targets. */
+ qpti_host->max_id = MAX_TARGETS;
+
+ /* Setup back pointers and misc. state. */
+ qpti->qhost = qpti_host;
+ qpti->sdev = sdev;
+ qpti->qpti_id = nqptis++;
+ qpti->prom_node = sdev->prom_node;
+ prom_getstring(qpti->prom_node, "name",
+ qpti->prom_name,
+ sizeof(qpti->prom_name));
+
+ /* This is not correct, actually. There's a switch
+ * on the PTI cards that put them into "emulation"
+ * mode- i.e., report themselves as QLGC,isp
+ * instead of PTI,ptisp. The only real substantive
+ * difference between non-pti and pti cards is
+ * the tmon register. Which is possibly even
+ * there for Qlogic cards, but non-functional.
+ */
+ qpti->is_pti = (strcmp (qpti->prom_name, "QLGC,isp") != 0);
+
+ qpti_chain_add(qpti);
+ if (qpti_map_regs(qpti) < 0)
+ goto fail_unlink;
+
+ if (qpti_register_irq(qpti) < 0)
+ goto fail_unmap_regs;
+
+ qpti_get_scsi_id(qpti);
+ qpti_get_bursts(qpti);
+ qpti_get_clock(qpti);
+
+ /* Clear out scsi_cmnd array. */
+ memset(qpti->cmd_slots, 0, sizeof(qpti->cmd_slots));
+
+ if (qpti_map_queues(qpti) < 0)
+ goto fail_free_irq;
+
+ /* Load the firmware. */
+ if (qlogicpti_load_firmware(qpti))
+ goto fail_unmap_queues;
+ if (qpti->is_pti) {
+ /* Check the PTI status reg. */
+ if (qlogicpti_verify_tmon(qpti))
+ goto fail_unmap_queues;
+ }
+
+ /* Reset the ISP and init res/req queues. */
+ if (qlogicpti_reset_hardware(qpti_host))
+ goto fail_unmap_queues;
+
+ printk("(Firmware v%d.%d.%d)", qpti->fware_majrev,
+ qpti->fware_minrev, qpti->fware_micrev);
+ {
+ char buffer[60];
+
+ prom_getstring (qpti->prom_node,
+ "isp-fcode", buffer, 60);
+ if (buffer[0])
+ printk("(Firmware %s)", buffer);
+ if (prom_getbool(qpti->prom_node, "differential"))
+ qpti->differential = 1;
+ }
+
+ printk (" [%s Wide, using %s interface]\n",
+ (qpti->ultra ? "Ultra" : "Fast"),
+ (qpti->differential ? "differential" : "single ended"));
+
+ nqptis_in_use++;
+ continue;
+
+ fail_unmap_queues:
+#define QSIZE(entries) (((entries) + 1) * QUEUE_ENTRY_LEN)
+ sbus_free_consistent(qpti->sdev,
+ QSIZE(RES_QUEUE_LEN),
+ qpti->res_cpu, qpti->res_dvma);
+ sbus_free_consistent(qpti->sdev,
+ QSIZE(QLOGICPTI_REQ_QUEUE_LEN),
+ qpti->req_cpu, qpti->req_dvma);
+#undef QSIZE
+ fail_free_irq:
+ free_irq(qpti->irq, qpti);
+
+ fail_unmap_regs:
+ sbus_iounmap(qpti->qregs,
+ qpti->sdev->reg_addrs[0].reg_size);
+ if (qpti->is_pti)
+ sbus_iounmap(qpti->sreg, sizeof(unsigned char));
+ fail_unlink:
+ qpti_chain_del(qpti);
+ scsi_unregister(qpti->qhost);
+ }
+ }
+ if (nqptis)
+ printk("QPTI: Total of %d PTI Qlogic/ISP hosts found, %d actually in use.\n",
+ nqptis, nqptis_in_use);
+ qptis_running = nqptis_in_use;
+ return nqptis;
+}
+
+static int qlogicpti_release(struct Scsi_Host *host)
+{
+ struct qlogicpti *qpti = (struct qlogicpti *) host->hostdata;
+
+ /* Remove visibility from IRQ handlers. */
+ qpti_chain_del(qpti);
+
+ /* Shut up the card. */
+ sbus_writew(0, qpti->qregs + SBUS_CTRL);
+
+ /* Free IRQ handler and unmap Qlogic,ISP and PTI status regs. */
+ free_irq(qpti->irq, qpti);
+
+#define QSIZE(entries) (((entries) + 1) * QUEUE_ENTRY_LEN)
+ sbus_free_consistent(qpti->sdev,
+ QSIZE(RES_QUEUE_LEN),
+ qpti->res_cpu, qpti->res_dvma);
+ sbus_free_consistent(qpti->sdev,
+ QSIZE(QLOGICPTI_REQ_QUEUE_LEN),
+ qpti->req_cpu, qpti->req_dvma);
+#undef QSIZE
+
+ sbus_iounmap(qpti->qregs, qpti->sdev->reg_addrs[0].reg_size);
+ if (qpti->is_pti)
+ sbus_iounmap(qpti->sreg, sizeof(unsigned char));
+
+ return 0;
+}
+
+const char *qlogicpti_info(struct Scsi_Host *host)
+{
+ static char buf[80];
+ struct qlogicpti *qpti = (struct qlogicpti *) host->hostdata;
+
+ sprintf(buf, "PTI Qlogic,ISP SBUS SCSI irq %s regs at %p",
+ __irq_itoa(qpti->qhost->irq), qpti->qregs);
+ return buf;
+}
+
+/* I am a certified frobtronicist. */
+static inline void marker_frob(struct Command_Entry *cmd)
+{
+ struct Marker_Entry *marker = (struct Marker_Entry *) cmd;
+
+ memset(marker, 0, sizeof(struct Marker_Entry));
+ marker->hdr.entry_cnt = 1;
+ marker->hdr.entry_type = ENTRY_MARKER;
+ marker->modifier = SYNC_ALL;
+ marker->rsvd = 0;
+}
+
+static inline void cmd_frob(struct Command_Entry *cmd, struct scsi_cmnd *Cmnd,
+ struct qlogicpti *qpti)
+{
+ memset(cmd, 0, sizeof(struct Command_Entry));
+ cmd->hdr.entry_cnt = 1;
+ cmd->hdr.entry_type = ENTRY_COMMAND;
+ cmd->target_id = Cmnd->device->id;
+ cmd->target_lun = Cmnd->device->lun;
+ cmd->cdb_length = Cmnd->cmd_len;
+ cmd->control_flags = 0;
+ if (Cmnd->device->tagged_supported) {
+ if (qpti->cmd_count[Cmnd->device->id] == 0)
+ qpti->tag_ages[Cmnd->device->id] = jiffies;
+ if ((jiffies - qpti->tag_ages[Cmnd->device->id]) > (5*HZ)) {
+ cmd->control_flags = CFLAG_ORDERED_TAG;
+ qpti->tag_ages[Cmnd->device->id] = jiffies;
+ } else
+ cmd->control_flags = CFLAG_SIMPLE_TAG;
+ }
+ if ((Cmnd->cmnd[0] == WRITE_6) ||
+ (Cmnd->cmnd[0] == WRITE_10) ||
+ (Cmnd->cmnd[0] == WRITE_12))
+ cmd->control_flags |= CFLAG_WRITE;
+ else
+ cmd->control_flags |= CFLAG_READ;
+ cmd->time_out = 30;
+ memcpy(cmd->cdb, Cmnd->cmnd, Cmnd->cmd_len);
+}
+
+/* Do it to it baby. */
+static inline int load_cmd(struct scsi_cmnd *Cmnd, struct Command_Entry *cmd,
+ struct qlogicpti *qpti, u_int in_ptr, u_int out_ptr)
+{
+ struct dataseg *ds;
+ struct scatterlist *sg;
+ int i, n;
+
+ if (Cmnd->use_sg) {
+ int sg_count;
+
+ sg = (struct scatterlist *) Cmnd->buffer;
+ sg_count = sbus_map_sg(qpti->sdev, sg, Cmnd->use_sg, Cmnd->sc_data_direction);
+
+ ds = cmd->dataseg;
+ cmd->segment_cnt = sg_count;
+
+ /* Fill in first four sg entries: */
+ n = sg_count;
+ if (n > 4)
+ n = 4;
+ for (i = 0; i < n; i++, sg++) {
+ ds[i].d_base = sg_dma_address(sg);
+ ds[i].d_count = sg_dma_len(sg);
+ }
+ sg_count -= 4;
+ while (sg_count > 0) {
+ struct Continuation_Entry *cont;
+
+ ++cmd->hdr.entry_cnt;
+ cont = (struct Continuation_Entry *) &qpti->req_cpu[in_ptr];
+ in_ptr = NEXT_REQ_PTR(in_ptr);
+ if (in_ptr == out_ptr)
+ return -1;
+
+ cont->hdr.entry_type = ENTRY_CONTINUATION;
+ cont->hdr.entry_cnt = 0;
+ cont->hdr.sys_def_1 = 0;
+ cont->hdr.flags = 0;
+ cont->reserved = 0;
+ ds = cont->dataseg;
+ n = sg_count;
+ if (n > 7)
+ n = 7;
+ for (i = 0; i < n; i++, sg++) {
+ ds[i].d_base = sg_dma_address(sg);
+ ds[i].d_count = sg_dma_len(sg);
+ }
+ sg_count -= n;
+ }
+ } else if (Cmnd->request_bufflen) {
+ Cmnd->SCp.ptr = (char *)(unsigned long)
+ sbus_map_single(qpti->sdev,
+ Cmnd->request_buffer,
+ Cmnd->request_bufflen,
+ Cmnd->sc_data_direction);
+
+ cmd->dataseg[0].d_base = (u32) ((unsigned long)Cmnd->SCp.ptr);
+ cmd->dataseg[0].d_count = Cmnd->request_bufflen;
+ cmd->segment_cnt = 1;
+ } else {
+ cmd->dataseg[0].d_base = 0;
+ cmd->dataseg[0].d_count = 0;
+ cmd->segment_cnt = 1; /* Shouldn't this be 0? */
+ }
+
+ /* Committed, record Scsi_Cmd so we can find it later. */
+ cmd->handle = in_ptr;
+ qpti->cmd_slots[in_ptr] = Cmnd;
+
+ qpti->cmd_count[Cmnd->device->id]++;
+ sbus_writew(in_ptr, qpti->qregs + MBOX4);
+ qpti->req_in_ptr = in_ptr;
+
+ return in_ptr;
+}
+
+static inline void update_can_queue(struct Scsi_Host *host, u_int in_ptr, u_int out_ptr)
+{
+ /* Temporary workaround until bug is found and fixed (one bug has been found
+ already, but fixing it makes things even worse) -jj */
+ int num_free = QLOGICPTI_REQ_QUEUE_LEN - REQ_QUEUE_DEPTH(in_ptr, out_ptr) - 64;
+ host->can_queue = host->host_busy + num_free;
+ host->sg_tablesize = QLOGICPTI_MAX_SG(num_free);
+}
+
+/*
+ * Until we scan the entire bus with inquiries, go throught this fella...
+ */
+static void ourdone(struct scsi_cmnd *Cmnd)
+{
+ struct qlogicpti *qpti = (struct qlogicpti *) Cmnd->device->host->hostdata;
+ int tgt = Cmnd->device->id;
+ void (*done) (struct scsi_cmnd *);
+
+ /* This grot added by DaveM, blame him for ugliness.
+ * The issue is that in the 2.3.x driver we use the
+ * host_scribble portion of the scsi command as a
+ * completion linked list at interrupt service time,
+ * so we have to store the done function pointer elsewhere.
+ */
+ done = (void (*)(struct scsi_cmnd *))
+ (((unsigned long) Cmnd->SCp.Message)
+#ifdef __sparc_v9__
+ | ((unsigned long) Cmnd->SCp.Status << 32UL)
+#endif
+ );
+
+ if ((qpti->sbits & (1 << tgt)) == 0) {
+ int ok = host_byte(Cmnd->result) == DID_OK;
+ if (Cmnd->cmnd[0] == 0x12 && ok) {
+ unsigned char *iqd;
+
+ if (Cmnd->use_sg != 0)
+ BUG();
+
+ iqd = ((unsigned char *)Cmnd->buffer);
+
+ /* tags handled in midlayer */
+ /* enable sync mode? */
+ if (iqd[7] & 0x10) {
+ qpti->dev_param[tgt].device_flags |= 0x10;
+ } else {
+ qpti->dev_param[tgt].synchronous_offset = 0;
+ qpti->dev_param[tgt].synchronous_period = 0;
+ }
+ /* are we wide capable? */
+ if (iqd[7] & 0x20) {
+ qpti->dev_param[tgt].device_flags |= 0x20;
+ }
+ qpti->sbits |= (1 << tgt);
+ } else if (!ok) {
+ qpti->sbits |= (1 << tgt);
+ }
+ }
+ done(Cmnd);
+}
+
+static int qlogicpti_queuecommand(struct scsi_cmnd *Cmnd, void (*done)(struct scsi_cmnd *));
+
+static int qlogicpti_queuecommand_slow(struct scsi_cmnd *Cmnd,
+ void (*done)(struct scsi_cmnd *))
+{
+ struct qlogicpti *qpti = (struct qlogicpti *) Cmnd->device->host->hostdata;
+
+ /*
+ * done checking this host adapter?
+ * If not, then rewrite the command
+ * to finish through ourdone so we
+ * can peek at Inquiry data results.
+ */
+ if (qpti->sbits && qpti->sbits != 0xffff) {
+ /* See above about in ourdone this ugliness... */
+ Cmnd->SCp.Message = ((unsigned long)done) & 0xffffffff;
+#ifdef CONFIG_SPARC64
+ Cmnd->SCp.Status = ((unsigned long)done >> 32UL) & 0xffffffff;
+#endif
+ return qlogicpti_queuecommand(Cmnd, ourdone);
+ }
+
+ /*
+ * We've peeked at all targets for this bus- time
+ * to set parameters for devices for real now.
+ */
+ if (qpti->sbits == 0xffff) {
+ int i;
+ for(i = 0; i < MAX_TARGETS; i++) {
+ u_short param[6];
+ param[0] = MBOX_SET_TARGET_PARAMS;
+ param[1] = (i << 8);
+ param[2] = (qpti->dev_param[i].device_flags << 8);
+ if (qpti->dev_param[i].device_flags & 0x10) {
+ param[3] = (qpti->dev_param[i].synchronous_offset << 8) |
+ qpti->dev_param[i].synchronous_period;
+ } else {
+ param[3] = 0;
+ }
+ (void) qlogicpti_mbox_command(qpti, param, 0);
+ }
+ /*
+ * set to zero so any traverse through ourdone
+ * doesn't start the whole process again,
+ */
+ qpti->sbits = 0;
+ }
+
+ /* check to see if we're done with all adapters... */
+ for (qpti = qptichain; qpti != NULL; qpti = qpti->next) {
+ if (qpti->sbits) {
+ break;
+ }
+ }
+
+ /*
+ * if we hit the end of the chain w/o finding adapters still
+ * capability-configuring, then we're done with all adapters
+ * and can rock on..
+ */
+ if (qpti == NULL)
+ Cmnd->device->host->hostt->queuecommand = qlogicpti_queuecommand;
+
+ return qlogicpti_queuecommand(Cmnd, done);
+}
+
+/*
+ * The middle SCSI layer ensures that queuecommand never gets invoked
+ * concurrently with itself or the interrupt handler (though the
+ * interrupt handler may call this routine as part of
+ * request-completion handling).
+ *
+ * "This code must fly." -davem
+ */
+static int qlogicpti_queuecommand(struct scsi_cmnd *Cmnd, void (*done)(struct scsi_cmnd *))
+{
+ struct Scsi_Host *host = Cmnd->device->host;
+ struct qlogicpti *qpti = (struct qlogicpti *) host->hostdata;
+ struct Command_Entry *cmd;
+ u_int out_ptr;
+ int in_ptr;
+
+ Cmnd->scsi_done = done;
+
+ in_ptr = qpti->req_in_ptr;
+ cmd = (struct Command_Entry *) &qpti->req_cpu[in_ptr];
+ out_ptr = sbus_readw(qpti->qregs + MBOX4);
+ in_ptr = NEXT_REQ_PTR(in_ptr);
+ if (in_ptr == out_ptr)
+ goto toss_command;
+
+ if (qpti->send_marker) {
+ marker_frob(cmd);
+ qpti->send_marker = 0;
+ if (NEXT_REQ_PTR(in_ptr) == out_ptr) {
+ sbus_writew(in_ptr, qpti->qregs + MBOX4);
+ qpti->req_in_ptr = in_ptr;
+ goto toss_command;
+ }
+ cmd = (struct Command_Entry *) &qpti->req_cpu[in_ptr];
+ in_ptr = NEXT_REQ_PTR(in_ptr);
+ }
+ cmd_frob(cmd, Cmnd, qpti);
+ if ((in_ptr = load_cmd(Cmnd, cmd, qpti, in_ptr, out_ptr)) == -1)
+ goto toss_command;
+
+ update_can_queue(host, in_ptr, out_ptr);
+
+ return 0;
+
+toss_command:
+ printk(KERN_EMERG "qlogicpti%d: request queue overflow\n",
+ qpti->qpti_id);
+
+ /* Unfortunately, unless you use the new EH code, which
+ * we don't, the midlayer will ignore the return value,
+ * which is insane. We pick up the pieces like this.
+ */
+ Cmnd->result = DID_BUS_BUSY;
+ done(Cmnd);
+ return 1;
+}
+
+static int qlogicpti_return_status(struct Status_Entry *sts, int id)
+{
+ int host_status = DID_ERROR;
+
+ switch (sts->completion_status) {
+ case CS_COMPLETE:
+ host_status = DID_OK;
+ break;
+ case CS_INCOMPLETE:
+ if (!(sts->state_flags & SF_GOT_BUS))
+ host_status = DID_NO_CONNECT;
+ else if (!(sts->state_flags & SF_GOT_TARGET))
+ host_status = DID_BAD_TARGET;
+ else if (!(sts->state_flags & SF_SENT_CDB))
+ host_status = DID_ERROR;
+ else if (!(sts->state_flags & SF_TRANSFERRED_DATA))
+ host_status = DID_ERROR;
+ else if (!(sts->state_flags & SF_GOT_STATUS))
+ host_status = DID_ERROR;
+ else if (!(sts->state_flags & SF_GOT_SENSE))
+ host_status = DID_ERROR;
+ break;
+ case CS_DMA_ERROR:
+ case CS_TRANSPORT_ERROR:
+ host_status = DID_ERROR;
+ break;
+ case CS_RESET_OCCURRED:
+ case CS_BUS_RESET:
+ host_status = DID_RESET;
+ break;
+ case CS_ABORTED:
+ host_status = DID_ABORT;
+ break;
+ case CS_TIMEOUT:
+ host_status = DID_TIME_OUT;
+ break;
+ case CS_DATA_OVERRUN:
+ case CS_COMMAND_OVERRUN:
+ case CS_STATUS_OVERRUN:
+ case CS_BAD_MESSAGE:
+ case CS_NO_MESSAGE_OUT:
+ case CS_EXT_ID_FAILED:
+ case CS_IDE_MSG_FAILED:
+ case CS_ABORT_MSG_FAILED:
+ case CS_NOP_MSG_FAILED:
+ case CS_PARITY_ERROR_MSG_FAILED:
+ case CS_DEVICE_RESET_MSG_FAILED:
+ case CS_ID_MSG_FAILED:
+ case CS_UNEXP_BUS_FREE:
+ host_status = DID_ERROR;
+ break;
+ case CS_DATA_UNDERRUN:
+ host_status = DID_OK;
+ break;
+ default:
+ printk(KERN_EMERG "qpti%d: unknown completion status 0x%04x\n",
+ id, sts->completion_status);
+ host_status = DID_ERROR;
+ break;
+ }
+
+ return (sts->scsi_status & STATUS_MASK) | (host_status << 16);
+}
+
+static struct scsi_cmnd *qlogicpti_intr_handler(struct qlogicpti *qpti)
+{
+ struct scsi_cmnd *Cmnd, *done_queue = NULL;
+ struct Status_Entry *sts;
+ u_int in_ptr, out_ptr;
+
+ if (!(sbus_readw(qpti->qregs + SBUS_STAT) & SBUS_STAT_RINT))
+ return NULL;
+
+ in_ptr = sbus_readw(qpti->qregs + MBOX5);
+ sbus_writew(HCCTRL_CRIRQ, qpti->qregs + HCCTRL);
+ if (sbus_readw(qpti->qregs + SBUS_SEMAPHORE) & SBUS_SEMAPHORE_LCK) {
+ switch (sbus_readw(qpti->qregs + MBOX0)) {
+ case ASYNC_SCSI_BUS_RESET:
+ case EXECUTION_TIMEOUT_RESET:
+ qpti->send_marker = 1;
+ break;
+ case INVALID_COMMAND:
+ case HOST_INTERFACE_ERROR:
+ case COMMAND_ERROR:
+ case COMMAND_PARAM_ERROR:
+ break;
+ };
+ sbus_writew(0, qpti->qregs + SBUS_SEMAPHORE);
+ }
+
+ /* This looks like a network driver! */
+ out_ptr = qpti->res_out_ptr;
+ while (out_ptr != in_ptr) {
+ u_int cmd_slot;
+
+ sts = (struct Status_Entry *) &qpti->res_cpu[out_ptr];
+ out_ptr = NEXT_RES_PTR(out_ptr);
+
+ /* We store an index in the handle, not the pointer in
+ * some form. This avoids problems due to the fact
+ * that the handle provided is only 32-bits. -DaveM
+ */
+ cmd_slot = sts->handle;
+ Cmnd = qpti->cmd_slots[cmd_slot];
+ qpti->cmd_slots[cmd_slot] = NULL;
+
+ if (sts->completion_status == CS_RESET_OCCURRED ||
+ sts->completion_status == CS_ABORTED ||
+ (sts->status_flags & STF_BUS_RESET))
+ qpti->send_marker = 1;
+
+ if (sts->state_flags & SF_GOT_SENSE)
+ memcpy(Cmnd->sense_buffer, sts->req_sense_data,
+ sizeof(Cmnd->sense_buffer));
+
+ if (sts->hdr.entry_type == ENTRY_STATUS)
+ Cmnd->result =
+ qlogicpti_return_status(sts, qpti->qpti_id);
+ else
+ Cmnd->result = DID_ERROR << 16;
+
+ if (Cmnd->use_sg) {
+ sbus_unmap_sg(qpti->sdev,
+ (struct scatterlist *)Cmnd->buffer,
+ Cmnd->use_sg,
+ Cmnd->sc_data_direction);
+ } else {
+ sbus_unmap_single(qpti->sdev,
+ (__u32)((unsigned long)Cmnd->SCp.ptr),
+ Cmnd->request_bufflen,
+ Cmnd->sc_data_direction);
+ }
+ qpti->cmd_count[Cmnd->device->id]--;
+ sbus_writew(out_ptr, qpti->qregs + MBOX5);
+ Cmnd->host_scribble = (unsigned char *) done_queue;
+ done_queue = Cmnd;
+ }
+ qpti->res_out_ptr = out_ptr;
+
+ return done_queue;
+}
+
+static irqreturn_t qpti_intr(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct qlogicpti *qpti = dev_id;
+ unsigned long flags;
+ struct scsi_cmnd *dq;
+
+ spin_lock_irqsave(qpti->qhost->host_lock, flags);
+ dq = qlogicpti_intr_handler(qpti);
+
+ if (dq != NULL) {
+ do {
+ struct scsi_cmnd *next;
+
+ next = (struct scsi_cmnd *) dq->host_scribble;
+ dq->scsi_done(dq);
+ dq = next;
+ } while (dq != NULL);
+ }
+ spin_unlock_irqrestore(qpti->qhost->host_lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+static int qlogicpti_abort(struct scsi_cmnd *Cmnd)
+{
+ u_short param[6];
+ struct Scsi_Host *host = Cmnd->device->host;
+ struct qlogicpti *qpti = (struct qlogicpti *) host->hostdata;
+ int return_status = SUCCESS;
+ u32 cmd_cookie;
+ int i;
+
+ printk(KERN_WARNING "qlogicpti : Aborting cmd for tgt[%d] lun[%d]\n",
+ (int)Cmnd->device->id, (int)Cmnd->device->lun);
+
+ qlogicpti_disable_irqs(qpti);
+
+ /* Find the 32-bit cookie we gave to the firmware for
+ * this command.
+ */
+ for (i = 0; i < QLOGICPTI_REQ_QUEUE_LEN + 1; i++)
+ if (qpti->cmd_slots[i] == Cmnd)
+ break;
+ cmd_cookie = i;
+
+ param[0] = MBOX_ABORT;
+ param[1] = (((u_short) Cmnd->device->id) << 8) | Cmnd->device->lun;
+ param[2] = cmd_cookie >> 16;
+ param[3] = cmd_cookie & 0xffff;
+ if (qlogicpti_mbox_command(qpti, param, 0) ||
+ (param[0] != MBOX_COMMAND_COMPLETE)) {
+ printk(KERN_EMERG "qlogicpti : scsi abort failure: %x\n", param[0]);
+ return_status = FAILED;
+ }
+
+ qlogicpti_enable_irqs(qpti);
+
+ return return_status;
+}
+
+static int qlogicpti_reset(struct scsi_cmnd *Cmnd)
+{
+ u_short param[6];
+ struct Scsi_Host *host = Cmnd->device->host;
+ struct qlogicpti *qpti = (struct qlogicpti *) host->hostdata;
+ int return_status = SUCCESS;
+
+ printk(KERN_WARNING "qlogicpti : Resetting SCSI bus!\n");
+
+ qlogicpti_disable_irqs(qpti);
+
+ param[0] = MBOX_BUS_RESET;
+ param[1] = qpti->host_param.bus_reset_delay;
+ if (qlogicpti_mbox_command(qpti, param, 0) ||
+ (param[0] != MBOX_COMMAND_COMPLETE)) {
+ printk(KERN_EMERG "qlogicisp : scsi bus reset failure: %x\n", param[0]);
+ return_status = FAILED;
+ }
+
+ qlogicpti_enable_irqs(qpti);
+
+ return return_status;
+}
+
+static struct scsi_host_template driver_template = {
+ .detect = qlogicpti_detect,
+ .release = qlogicpti_release,
+ .info = qlogicpti_info,
+ .queuecommand = qlogicpti_queuecommand_slow,
+ .eh_abort_handler = qlogicpti_abort,
+ .eh_bus_reset_handler = qlogicpti_reset,
+ .can_queue = QLOGICPTI_REQ_QUEUE_LEN,
+ .this_id = 7,
+ .sg_tablesize = QLOGICPTI_MAX_SG(QLOGICPTI_REQ_QUEUE_LEN),
+ .cmd_per_lun = 1,
+ .use_clustering = ENABLE_CLUSTERING,
+};
+
+
+#include "scsi_module.c"
+
+MODULE_LICENSE("GPL");
+