summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/sym53c8xx_2/sym_nvram.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/sym53c8xx_2/sym_nvram.c')
-rw-r--r--drivers/scsi/sym53c8xx_2/sym_nvram.c771
1 files changed, 771 insertions, 0 deletions
diff --git a/drivers/scsi/sym53c8xx_2/sym_nvram.c b/drivers/scsi/sym53c8xx_2/sym_nvram.c
new file mode 100644
index 000000000000..1b721e3ec520
--- /dev/null
+++ b/drivers/scsi/sym53c8xx_2/sym_nvram.c
@@ -0,0 +1,771 @@
+/*
+ * Device driver for the SYMBIOS/LSILOGIC 53C8XX and 53C1010 family
+ * of PCI-SCSI IO processors.
+ *
+ * Copyright (C) 1999-2001 Gerard Roudier <groudier@free.fr>
+ *
+ * This driver is derived from the Linux sym53c8xx driver.
+ * Copyright (C) 1998-2000 Gerard Roudier
+ *
+ * The sym53c8xx driver is derived from the ncr53c8xx driver that had been
+ * a port of the FreeBSD ncr driver to Linux-1.2.13.
+ *
+ * The original ncr driver has been written for 386bsd and FreeBSD by
+ * Wolfgang Stanglmeier <wolf@cologne.de>
+ * Stefan Esser <se@mi.Uni-Koeln.de>
+ * Copyright (C) 1994 Wolfgang Stanglmeier
+ *
+ * Other major contributions:
+ *
+ * NVRAM detection and reading.
+ * Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk>
+ *
+ *-----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include "sym_glue.h"
+#include "sym_nvram.h"
+
+#ifdef SYM_CONF_DEBUG_NVRAM
+static u_char Tekram_boot_delay[7] = {3, 5, 10, 20, 30, 60, 120};
+#endif
+
+/*
+ * Get host setup from NVRAM.
+ */
+void sym_nvram_setup_host(struct Scsi_Host *shost, struct sym_hcb *np, struct sym_nvram *nvram)
+{
+ /*
+ * Get parity checking, host ID, verbose mode
+ * and miscellaneous host flags from NVRAM.
+ */
+ switch (nvram->type) {
+ case SYM_SYMBIOS_NVRAM:
+ if (!(nvram->data.Symbios.flags & SYMBIOS_PARITY_ENABLE))
+ np->rv_scntl0 &= ~0x0a;
+ np->myaddr = nvram->data.Symbios.host_id & 0x0f;
+ if (nvram->data.Symbios.flags & SYMBIOS_VERBOSE_MSGS)
+ np->verbose += 1;
+ if (nvram->data.Symbios.flags1 & SYMBIOS_SCAN_HI_LO)
+ shost->reverse_ordering = 1;
+ if (nvram->data.Symbios.flags2 & SYMBIOS_AVOID_BUS_RESET)
+ np->usrflags |= SYM_AVOID_BUS_RESET;
+ break;
+ case SYM_TEKRAM_NVRAM:
+ np->myaddr = nvram->data.Tekram.host_id & 0x0f;
+ break;
+#ifdef CONFIG_PARISC
+ case SYM_PARISC_PDC:
+ if (nvram->data.parisc.host_id != -1)
+ np->myaddr = nvram->data.parisc.host_id;
+ if (nvram->data.parisc.factor != -1)
+ np->minsync = nvram->data.parisc.factor;
+ if (nvram->data.parisc.width != -1)
+ np->maxwide = nvram->data.parisc.width;
+ switch (nvram->data.parisc.mode) {
+ case 0: np->scsi_mode = SMODE_SE; break;
+ case 1: np->scsi_mode = SMODE_HVD; break;
+ case 2: np->scsi_mode = SMODE_LVD; break;
+ default: break;
+ }
+#endif
+ default:
+ break;
+ }
+}
+
+/*
+ * Get target set-up from Symbios format NVRAM.
+ */
+static void
+sym_Symbios_setup_target(struct sym_hcb *np, int target, Symbios_nvram *nvram)
+{
+ struct sym_tcb *tp = &np->target[target];
+ Symbios_target *tn = &nvram->target[target];
+
+ tp->usrtags =
+ (tn->flags & SYMBIOS_QUEUE_TAGS_ENABLED)? SYM_SETUP_MAX_TAG : 0;
+
+ if (!(tn->flags & SYMBIOS_DISCONNECT_ENABLE))
+ tp->usrflags &= ~SYM_DISC_ENABLED;
+ if (!(tn->flags & SYMBIOS_SCAN_AT_BOOT_TIME))
+ tp->usrflags |= SYM_SCAN_BOOT_DISABLED;
+ if (!(tn->flags & SYMBIOS_SCAN_LUNS))
+ tp->usrflags |= SYM_SCAN_LUNS_DISABLED;
+}
+
+/*
+ * Get target set-up from Tekram format NVRAM.
+ */
+static void
+sym_Tekram_setup_target(struct sym_hcb *np, int target, Tekram_nvram *nvram)
+{
+ struct sym_tcb *tp = &np->target[target];
+ struct Tekram_target *tn = &nvram->target[target];
+
+ if (tn->flags & TEKRAM_TAGGED_COMMANDS) {
+ tp->usrtags = 2 << nvram->max_tags_index;
+ }
+
+ if (tn->flags & TEKRAM_DISCONNECT_ENABLE)
+ tp->usrflags |= SYM_DISC_ENABLED;
+
+ /* If any device does not support parity, we will not use this option */
+ if (!(tn->flags & TEKRAM_PARITY_CHECK))
+ np->rv_scntl0 &= ~0x0a; /* SCSI parity checking disabled */
+}
+
+/*
+ * Get target setup from NVRAM.
+ */
+void sym_nvram_setup_target(struct sym_hcb *np, int target, struct sym_nvram *nvp)
+{
+ switch (nvp->type) {
+ case SYM_SYMBIOS_NVRAM:
+ sym_Symbios_setup_target(np, target, &nvp->data.Symbios);
+ break;
+ case SYM_TEKRAM_NVRAM:
+ sym_Tekram_setup_target(np, target, &nvp->data.Tekram);
+ break;
+ default:
+ break;
+ }
+}
+
+#ifdef SYM_CONF_DEBUG_NVRAM
+/*
+ * Dump Symbios format NVRAM for debugging purpose.
+ */
+static void sym_display_Symbios_nvram(struct sym_device *np, Symbios_nvram *nvram)
+{
+ int i;
+
+ /* display Symbios nvram host data */
+ printf("%s: HOST ID=%d%s%s%s%s%s%s\n",
+ sym_name(np), nvram->host_id & 0x0f,
+ (nvram->flags & SYMBIOS_SCAM_ENABLE) ? " SCAM" :"",
+ (nvram->flags & SYMBIOS_PARITY_ENABLE) ? " PARITY" :"",
+ (nvram->flags & SYMBIOS_VERBOSE_MSGS) ? " VERBOSE" :"",
+ (nvram->flags & SYMBIOS_CHS_MAPPING) ? " CHS_ALT" :"",
+ (nvram->flags2 & SYMBIOS_AVOID_BUS_RESET)?" NO_RESET" :"",
+ (nvram->flags1 & SYMBIOS_SCAN_HI_LO) ? " HI_LO" :"");
+
+ /* display Symbios nvram drive data */
+ for (i = 0 ; i < 15 ; i++) {
+ struct Symbios_target *tn = &nvram->target[i];
+ printf("%s-%d:%s%s%s%s WIDTH=%d SYNC=%d TMO=%d\n",
+ sym_name(np), i,
+ (tn->flags & SYMBIOS_DISCONNECT_ENABLE) ? " DISC" : "",
+ (tn->flags & SYMBIOS_SCAN_AT_BOOT_TIME) ? " SCAN_BOOT" : "",
+ (tn->flags & SYMBIOS_SCAN_LUNS) ? " SCAN_LUNS" : "",
+ (tn->flags & SYMBIOS_QUEUE_TAGS_ENABLED)? " TCQ" : "",
+ tn->bus_width,
+ tn->sync_period / 4,
+ tn->timeout);
+ }
+}
+
+/*
+ * Dump TEKRAM format NVRAM for debugging purpose.
+ */
+static void sym_display_Tekram_nvram(struct sym_device *np, Tekram_nvram *nvram)
+{
+ int i, tags, boot_delay;
+ char *rem;
+
+ /* display Tekram nvram host data */
+ tags = 2 << nvram->max_tags_index;
+ boot_delay = 0;
+ if (nvram->boot_delay_index < 6)
+ boot_delay = Tekram_boot_delay[nvram->boot_delay_index];
+ switch ((nvram->flags & TEKRAM_REMOVABLE_FLAGS) >> 6) {
+ default:
+ case 0: rem = ""; break;
+ case 1: rem = " REMOVABLE=boot device"; break;
+ case 2: rem = " REMOVABLE=all"; break;
+ }
+
+ printf("%s: HOST ID=%d%s%s%s%s%s%s%s%s%s BOOT DELAY=%d tags=%d\n",
+ sym_name(np), nvram->host_id & 0x0f,
+ (nvram->flags1 & SYMBIOS_SCAM_ENABLE) ? " SCAM" :"",
+ (nvram->flags & TEKRAM_MORE_THAN_2_DRIVES) ? " >2DRIVES":"",
+ (nvram->flags & TEKRAM_DRIVES_SUP_1GB) ? " >1GB" :"",
+ (nvram->flags & TEKRAM_RESET_ON_POWER_ON) ? " RESET" :"",
+ (nvram->flags & TEKRAM_ACTIVE_NEGATION) ? " ACT_NEG" :"",
+ (nvram->flags & TEKRAM_IMMEDIATE_SEEK) ? " IMM_SEEK" :"",
+ (nvram->flags & TEKRAM_SCAN_LUNS) ? " SCAN_LUNS" :"",
+ (nvram->flags1 & TEKRAM_F2_F6_ENABLED) ? " F2_F6" :"",
+ rem, boot_delay, tags);
+
+ /* display Tekram nvram drive data */
+ for (i = 0; i <= 15; i++) {
+ int sync, j;
+ struct Tekram_target *tn = &nvram->target[i];
+ j = tn->sync_index & 0xf;
+ sync = Tekram_sync[j];
+ printf("%s-%d:%s%s%s%s%s%s PERIOD=%d\n",
+ sym_name(np), i,
+ (tn->flags & TEKRAM_PARITY_CHECK) ? " PARITY" : "",
+ (tn->flags & TEKRAM_SYNC_NEGO) ? " SYNC" : "",
+ (tn->flags & TEKRAM_DISCONNECT_ENABLE) ? " DISC" : "",
+ (tn->flags & TEKRAM_START_CMD) ? " START" : "",
+ (tn->flags & TEKRAM_TAGGED_COMMANDS) ? " TCQ" : "",
+ (tn->flags & TEKRAM_WIDE_NEGO) ? " WIDE" : "",
+ sync);
+ }
+}
+#else
+static void sym_display_Symbios_nvram(struct sym_device *np, Symbios_nvram *nvram) { (void)np; (void)nvram; }
+static void sym_display_Tekram_nvram(struct sym_device *np, Tekram_nvram *nvram) { (void)np; (void)nvram; }
+#endif /* SYM_CONF_DEBUG_NVRAM */
+
+
+/*
+ * 24C16 EEPROM reading.
+ *
+ * GPOI0 - data in/data out
+ * GPIO1 - clock
+ * Symbios NVRAM wiring now also used by Tekram.
+ */
+
+#define SET_BIT 0
+#define CLR_BIT 1
+#define SET_CLK 2
+#define CLR_CLK 3
+
+/*
+ * Set/clear data/clock bit in GPIO0
+ */
+static void S24C16_set_bit(struct sym_device *np, u_char write_bit, u_char *gpreg,
+ int bit_mode)
+{
+ udelay(5);
+ switch (bit_mode) {
+ case SET_BIT:
+ *gpreg |= write_bit;
+ break;
+ case CLR_BIT:
+ *gpreg &= 0xfe;
+ break;
+ case SET_CLK:
+ *gpreg |= 0x02;
+ break;
+ case CLR_CLK:
+ *gpreg &= 0xfd;
+ break;
+
+ }
+ OUTB(np, nc_gpreg, *gpreg);
+ udelay(5);
+}
+
+/*
+ * Send START condition to NVRAM to wake it up.
+ */
+static void S24C16_start(struct sym_device *np, u_char *gpreg)
+{
+ S24C16_set_bit(np, 1, gpreg, SET_BIT);
+ S24C16_set_bit(np, 0, gpreg, SET_CLK);
+ S24C16_set_bit(np, 0, gpreg, CLR_BIT);
+ S24C16_set_bit(np, 0, gpreg, CLR_CLK);
+}
+
+/*
+ * Send STOP condition to NVRAM - puts NVRAM to sleep... ZZzzzz!!
+ */
+static void S24C16_stop(struct sym_device *np, u_char *gpreg)
+{
+ S24C16_set_bit(np, 0, gpreg, SET_CLK);
+ S24C16_set_bit(np, 1, gpreg, SET_BIT);
+}
+
+/*
+ * Read or write a bit to the NVRAM,
+ * read if GPIO0 input else write if GPIO0 output
+ */
+static void S24C16_do_bit(struct sym_device *np, u_char *read_bit, u_char write_bit,
+ u_char *gpreg)
+{
+ S24C16_set_bit(np, write_bit, gpreg, SET_BIT);
+ S24C16_set_bit(np, 0, gpreg, SET_CLK);
+ if (read_bit)
+ *read_bit = INB(np, nc_gpreg);
+ S24C16_set_bit(np, 0, gpreg, CLR_CLK);
+ S24C16_set_bit(np, 0, gpreg, CLR_BIT);
+}
+
+/*
+ * Output an ACK to the NVRAM after reading,
+ * change GPIO0 to output and when done back to an input
+ */
+static void S24C16_write_ack(struct sym_device *np, u_char write_bit, u_char *gpreg,
+ u_char *gpcntl)
+{
+ OUTB(np, nc_gpcntl, *gpcntl & 0xfe);
+ S24C16_do_bit(np, NULL, write_bit, gpreg);
+ OUTB(np, nc_gpcntl, *gpcntl);
+}
+
+/*
+ * Input an ACK from NVRAM after writing,
+ * change GPIO0 to input and when done back to an output
+ */
+static void S24C16_read_ack(struct sym_device *np, u_char *read_bit, u_char *gpreg,
+ u_char *gpcntl)
+{
+ OUTB(np, nc_gpcntl, *gpcntl | 0x01);
+ S24C16_do_bit(np, read_bit, 1, gpreg);
+ OUTB(np, nc_gpcntl, *gpcntl);
+}
+
+/*
+ * WRITE a byte to the NVRAM and then get an ACK to see it was accepted OK,
+ * GPIO0 must already be set as an output
+ */
+static void S24C16_write_byte(struct sym_device *np, u_char *ack_data, u_char write_data,
+ u_char *gpreg, u_char *gpcntl)
+{
+ int x;
+
+ for (x = 0; x < 8; x++)
+ S24C16_do_bit(np, NULL, (write_data >> (7 - x)) & 0x01, gpreg);
+
+ S24C16_read_ack(np, ack_data, gpreg, gpcntl);
+}
+
+/*
+ * READ a byte from the NVRAM and then send an ACK to say we have got it,
+ * GPIO0 must already be set as an input
+ */
+static void S24C16_read_byte(struct sym_device *np, u_char *read_data, u_char ack_data,
+ u_char *gpreg, u_char *gpcntl)
+{
+ int x;
+ u_char read_bit;
+
+ *read_data = 0;
+ for (x = 0; x < 8; x++) {
+ S24C16_do_bit(np, &read_bit, 1, gpreg);
+ *read_data |= ((read_bit & 0x01) << (7 - x));
+ }
+
+ S24C16_write_ack(np, ack_data, gpreg, gpcntl);
+}
+
+#if SYM_CONF_NVRAM_WRITE_SUPPORT
+/*
+ * Write 'len' bytes starting at 'offset'.
+ */
+static int sym_write_S24C16_nvram(struct sym_device *np, int offset,
+ u_char *data, int len)
+{
+ u_char gpcntl, gpreg;
+ u_char old_gpcntl, old_gpreg;
+ u_char ack_data;
+ int x;
+
+ /* save current state of GPCNTL and GPREG */
+ old_gpreg = INB(np, nc_gpreg);
+ old_gpcntl = INB(np, nc_gpcntl);
+ gpcntl = old_gpcntl & 0x1c;
+
+ /* set up GPREG & GPCNTL to set GPIO0 and GPIO1 in to known state */
+ OUTB(np, nc_gpreg, old_gpreg);
+ OUTB(np, nc_gpcntl, gpcntl);
+
+ /* this is to set NVRAM into a known state with GPIO0/1 both low */
+ gpreg = old_gpreg;
+ S24C16_set_bit(np, 0, &gpreg, CLR_CLK);
+ S24C16_set_bit(np, 0, &gpreg, CLR_BIT);
+
+ /* now set NVRAM inactive with GPIO0/1 both high */
+ S24C16_stop(np, &gpreg);
+
+ /* NVRAM has to be written in segments of 16 bytes */
+ for (x = 0; x < len ; x += 16) {
+ do {
+ S24C16_start(np, &gpreg);
+ S24C16_write_byte(np, &ack_data,
+ 0xa0 | (((offset+x) >> 7) & 0x0e),
+ &gpreg, &gpcntl);
+ } while (ack_data & 0x01);
+
+ S24C16_write_byte(np, &ack_data, (offset+x) & 0xff,
+ &gpreg, &gpcntl);
+
+ for (y = 0; y < 16; y++)
+ S24C16_write_byte(np, &ack_data, data[x+y],
+ &gpreg, &gpcntl);
+ S24C16_stop(np, &gpreg);
+ }
+
+ /* return GPIO0/1 to original states after having accessed NVRAM */
+ OUTB(np, nc_gpcntl, old_gpcntl);
+ OUTB(np, nc_gpreg, old_gpreg);
+
+ return 0;
+}
+#endif /* SYM_CONF_NVRAM_WRITE_SUPPORT */
+
+/*
+ * Read 'len' bytes starting at 'offset'.
+ */
+static int sym_read_S24C16_nvram(struct sym_device *np, int offset, u_char *data, int len)
+{
+ u_char gpcntl, gpreg;
+ u_char old_gpcntl, old_gpreg;
+ u_char ack_data;
+ int retv = 1;
+ int x;
+
+ /* save current state of GPCNTL and GPREG */
+ old_gpreg = INB(np, nc_gpreg);
+ old_gpcntl = INB(np, nc_gpcntl);
+ gpcntl = old_gpcntl & 0x1c;
+
+ /* set up GPREG & GPCNTL to set GPIO0 and GPIO1 in to known state */
+ OUTB(np, nc_gpreg, old_gpreg);
+ OUTB(np, nc_gpcntl, gpcntl);
+
+ /* this is to set NVRAM into a known state with GPIO0/1 both low */
+ gpreg = old_gpreg;
+ S24C16_set_bit(np, 0, &gpreg, CLR_CLK);
+ S24C16_set_bit(np, 0, &gpreg, CLR_BIT);
+
+ /* now set NVRAM inactive with GPIO0/1 both high */
+ S24C16_stop(np, &gpreg);
+
+ /* activate NVRAM */
+ S24C16_start(np, &gpreg);
+
+ /* write device code and random address MSB */
+ S24C16_write_byte(np, &ack_data,
+ 0xa0 | ((offset >> 7) & 0x0e), &gpreg, &gpcntl);
+ if (ack_data & 0x01)
+ goto out;
+
+ /* write random address LSB */
+ S24C16_write_byte(np, &ack_data,
+ offset & 0xff, &gpreg, &gpcntl);
+ if (ack_data & 0x01)
+ goto out;
+
+ /* regenerate START state to set up for reading */
+ S24C16_start(np, &gpreg);
+
+ /* rewrite device code and address MSB with read bit set (lsb = 0x01) */
+ S24C16_write_byte(np, &ack_data,
+ 0xa1 | ((offset >> 7) & 0x0e), &gpreg, &gpcntl);
+ if (ack_data & 0x01)
+ goto out;
+
+ /* now set up GPIO0 for inputting data */
+ gpcntl |= 0x01;
+ OUTB(np, nc_gpcntl, gpcntl);
+
+ /* input all requested data - only part of total NVRAM */
+ for (x = 0; x < len; x++)
+ S24C16_read_byte(np, &data[x], (x == (len-1)), &gpreg, &gpcntl);
+
+ /* finally put NVRAM back in inactive mode */
+ gpcntl &= 0xfe;
+ OUTB(np, nc_gpcntl, gpcntl);
+ S24C16_stop(np, &gpreg);
+ retv = 0;
+out:
+ /* return GPIO0/1 to original states after having accessed NVRAM */
+ OUTB(np, nc_gpcntl, old_gpcntl);
+ OUTB(np, nc_gpreg, old_gpreg);
+
+ return retv;
+}
+
+#undef SET_BIT
+#undef CLR_BIT
+#undef SET_CLK
+#undef CLR_CLK
+
+/*
+ * Try reading Symbios NVRAM.
+ * Return 0 if OK.
+ */
+static int sym_read_Symbios_nvram(struct sym_device *np, Symbios_nvram *nvram)
+{
+ static u_char Symbios_trailer[6] = {0xfe, 0xfe, 0, 0, 0, 0};
+ u_char *data = (u_char *) nvram;
+ int len = sizeof(*nvram);
+ u_short csum;
+ int x;
+
+ /* probe the 24c16 and read the SYMBIOS 24c16 area */
+ if (sym_read_S24C16_nvram (np, SYMBIOS_NVRAM_ADDRESS, data, len))
+ return 1;
+
+ /* check valid NVRAM signature, verify byte count and checksum */
+ if (nvram->type != 0 ||
+ memcmp(nvram->trailer, Symbios_trailer, 6) ||
+ nvram->byte_count != len - 12)
+ return 1;
+
+ /* verify checksum */
+ for (x = 6, csum = 0; x < len - 6; x++)
+ csum += data[x];
+ if (csum != nvram->checksum)
+ return 1;
+
+ return 0;
+}
+
+/*
+ * 93C46 EEPROM reading.
+ *
+ * GPOI0 - data in
+ * GPIO1 - data out
+ * GPIO2 - clock
+ * GPIO4 - chip select
+ *
+ * Used by Tekram.
+ */
+
+/*
+ * Pulse clock bit in GPIO0
+ */
+static void T93C46_Clk(struct sym_device *np, u_char *gpreg)
+{
+ OUTB(np, nc_gpreg, *gpreg | 0x04);
+ udelay(2);
+ OUTB(np, nc_gpreg, *gpreg);
+}
+
+/*
+ * Read bit from NVRAM
+ */
+static void T93C46_Read_Bit(struct sym_device *np, u_char *read_bit, u_char *gpreg)
+{
+ udelay(2);
+ T93C46_Clk(np, gpreg);
+ *read_bit = INB(np, nc_gpreg);
+}
+
+/*
+ * Write bit to GPIO0
+ */
+static void T93C46_Write_Bit(struct sym_device *np, u_char write_bit, u_char *gpreg)
+{
+ if (write_bit & 0x01)
+ *gpreg |= 0x02;
+ else
+ *gpreg &= 0xfd;
+
+ *gpreg |= 0x10;
+
+ OUTB(np, nc_gpreg, *gpreg);
+ udelay(2);
+
+ T93C46_Clk(np, gpreg);
+}
+
+/*
+ * Send STOP condition to NVRAM - puts NVRAM to sleep... ZZZzzz!!
+ */
+static void T93C46_Stop(struct sym_device *np, u_char *gpreg)
+{
+ *gpreg &= 0xef;
+ OUTB(np, nc_gpreg, *gpreg);
+ udelay(2);
+
+ T93C46_Clk(np, gpreg);
+}
+
+/*
+ * Send read command and address to NVRAM
+ */
+static void T93C46_Send_Command(struct sym_device *np, u_short write_data,
+ u_char *read_bit, u_char *gpreg)
+{
+ int x;
+
+ /* send 9 bits, start bit (1), command (2), address (6) */
+ for (x = 0; x < 9; x++)
+ T93C46_Write_Bit(np, (u_char) (write_data >> (8 - x)), gpreg);
+
+ *read_bit = INB(np, nc_gpreg);
+}
+
+/*
+ * READ 2 bytes from the NVRAM
+ */
+static void T93C46_Read_Word(struct sym_device *np,
+ unsigned short *nvram_data, unsigned char *gpreg)
+{
+ int x;
+ u_char read_bit;
+
+ *nvram_data = 0;
+ for (x = 0; x < 16; x++) {
+ T93C46_Read_Bit(np, &read_bit, gpreg);
+
+ if (read_bit & 0x01)
+ *nvram_data |= (0x01 << (15 - x));
+ else
+ *nvram_data &= ~(0x01 << (15 - x));
+ }
+}
+
+/*
+ * Read Tekram NvRAM data.
+ */
+static int T93C46_Read_Data(struct sym_device *np, unsigned short *data,
+ int len, unsigned char *gpreg)
+{
+ int x;
+
+ for (x = 0; x < len; x++) {
+ unsigned char read_bit;
+ /* output read command and address */
+ T93C46_Send_Command(np, 0x180 | x, &read_bit, gpreg);
+ if (read_bit & 0x01)
+ return 1; /* Bad */
+ T93C46_Read_Word(np, &data[x], gpreg);
+ T93C46_Stop(np, gpreg);
+ }
+
+ return 0;
+}
+
+/*
+ * Try reading 93C46 Tekram NVRAM.
+ */
+static int sym_read_T93C46_nvram(struct sym_device *np, Tekram_nvram *nvram)
+{
+ u_char gpcntl, gpreg;
+ u_char old_gpcntl, old_gpreg;
+ int retv = 1;
+
+ /* save current state of GPCNTL and GPREG */
+ old_gpreg = INB(np, nc_gpreg);
+ old_gpcntl = INB(np, nc_gpcntl);
+
+ /* set up GPREG & GPCNTL to set GPIO0/1/2/4 in to known state, 0 in,
+ 1/2/4 out */
+ gpreg = old_gpreg & 0xe9;
+ OUTB(np, nc_gpreg, gpreg);
+ gpcntl = (old_gpcntl & 0xe9) | 0x09;
+ OUTB(np, nc_gpcntl, gpcntl);
+
+ /* input all of NVRAM, 64 words */
+ retv = T93C46_Read_Data(np, (u_short *) nvram,
+ sizeof(*nvram) / sizeof(short), &gpreg);
+
+ /* return GPIO0/1/2/4 to original states after having accessed NVRAM */
+ OUTB(np, nc_gpcntl, old_gpcntl);
+ OUTB(np, nc_gpreg, old_gpreg);
+
+ return retv;
+}
+
+/*
+ * Try reading Tekram NVRAM.
+ * Return 0 if OK.
+ */
+static int sym_read_Tekram_nvram (struct sym_device *np, Tekram_nvram *nvram)
+{
+ u_char *data = (u_char *) nvram;
+ int len = sizeof(*nvram);
+ u_short csum;
+ int x;
+
+ switch (np->device_id) {
+ case PCI_DEVICE_ID_NCR_53C885:
+ case PCI_DEVICE_ID_NCR_53C895:
+ case PCI_DEVICE_ID_NCR_53C896:
+ x = sym_read_S24C16_nvram(np, TEKRAM_24C16_NVRAM_ADDRESS,
+ data, len);
+ break;
+ case PCI_DEVICE_ID_NCR_53C875:
+ x = sym_read_S24C16_nvram(np, TEKRAM_24C16_NVRAM_ADDRESS,
+ data, len);
+ if (!x)
+ break;
+ default:
+ x = sym_read_T93C46_nvram(np, nvram);
+ break;
+ }
+ if (x)
+ return 1;
+
+ /* verify checksum */
+ for (x = 0, csum = 0; x < len - 1; x += 2)
+ csum += data[x] + (data[x+1] << 8);
+ if (csum != 0x1234)
+ return 1;
+
+ return 0;
+}
+
+#ifdef CONFIG_PARISC
+/*
+ * Host firmware (PDC) keeps a table for altering SCSI capabilities.
+ * Many newer machines export one channel of 53c896 chip as SE, 50-pin HD.
+ * Also used for Multi-initiator SCSI clusters to set the SCSI Initiator ID.
+ */
+static int sym_read_parisc_pdc(struct sym_device *np, struct pdc_initiator *pdc)
+{
+ struct hardware_path hwpath;
+ get_pci_node_path(np->pdev, &hwpath);
+ if (!pdc_get_initiator(&hwpath, pdc))
+ return 0;
+
+ return SYM_PARISC_PDC;
+}
+#else
+static int sym_read_parisc_pdc(struct sym_device *np, struct pdc_initiator *x)
+{
+ return 0;
+}
+#endif
+
+/*
+ * Try reading Symbios or Tekram NVRAM
+ */
+int sym_read_nvram(struct sym_device *np, struct sym_nvram *nvp)
+{
+ if (!sym_read_Symbios_nvram(np, &nvp->data.Symbios)) {
+ nvp->type = SYM_SYMBIOS_NVRAM;
+ sym_display_Symbios_nvram(np, &nvp->data.Symbios);
+ } else if (!sym_read_Tekram_nvram(np, &nvp->data.Tekram)) {
+ nvp->type = SYM_TEKRAM_NVRAM;
+ sym_display_Tekram_nvram(np, &nvp->data.Tekram);
+ } else {
+ nvp->type = sym_read_parisc_pdc(np, &nvp->data.parisc);
+ }
+ return nvp->type;
+}
+
+char *sym_nvram_type(struct sym_nvram *nvp)
+{
+ switch (nvp->type) {
+ case SYM_SYMBIOS_NVRAM:
+ return "Symbios NVRAM";
+ case SYM_TEKRAM_NVRAM:
+ return "Tekram NVRAM";
+ case SYM_PARISC_PDC:
+ return "PA-RISC Firmware";
+ default:
+ return "No NVRAM";
+ }
+}