summaryrefslogtreecommitdiffstats
path: root/drivers/spi/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/spi/Kconfig')
-rw-r--r--drivers/spi/Kconfig34
1 files changed, 34 insertions, 0 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 7a75faeb0526..23334c8bc4c7 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -75,11 +75,45 @@ config SPI_BUTTERFLY
inexpensive battery powered microcontroller evaluation board.
This same cable can be used to flash new firmware.
+config SPI_MPC83xx
+ tristate "Freescale MPC83xx SPI controller"
+ depends on SPI_MASTER && PPC_83xx && EXPERIMENTAL
+ select SPI_BITBANG
+ help
+ This enables using the Freescale MPC83xx SPI controller in master
+ mode.
+
+ Note, this driver uniquely supports the SPI controller on the MPC83xx
+ family of PowerPC processors. The MPC83xx uses a simple set of shift
+ registers for data (opposed to the CPM based descriptor model).
+
+config SPI_PXA2XX
+ tristate "PXA2xx SSP SPI master"
+ depends on SPI_MASTER && ARCH_PXA && EXPERIMENTAL
+ help
+ This enables using a PXA2xx SSP port as a SPI master controller.
+ The driver can be configured to use any SSP port and additional
+ documentation can be found a Documentation/spi/pxa2xx.
+
+config SPI_S3C24XX_GPIO
+ tristate "Samsung S3C24XX series SPI by GPIO"
+ depends on SPI_MASTER && ARCH_S3C2410 && SPI_BITBANG && EXPERIMENTAL
+ help
+ SPI driver for Samsung S3C24XX series ARM SoCs using
+ GPIO lines to provide the SPI bus. This can be used where
+ the inbuilt hardware cannot provide the transfer mode, or
+ where the board is using non hardware connected pins.
#
# Add new SPI master controllers in alphabetical order above this line
#
+config SPI_S3C24XX
+ tristate "Samsung S3C24XX series SPI"
+ depends on SPI_MASTER && ARCH_S3C2410 && EXPERIMENTAL
+ help
+ SPI driver for Samsung S3C24XX series ARM SoCs
+
#
# There are lots of SPI device types, with sensors and memory
# being probably the most widely used ones.