summaryrefslogtreecommitdiffstats
path: root/drivers/spi/dw_spi_mid.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/spi/dw_spi_mid.c')
-rw-r--r--drivers/spi/dw_spi_mid.c223
1 files changed, 223 insertions, 0 deletions
diff --git a/drivers/spi/dw_spi_mid.c b/drivers/spi/dw_spi_mid.c
new file mode 100644
index 000000000000..c91c966e0717
--- /dev/null
+++ b/drivers/spi/dw_spi_mid.c
@@ -0,0 +1,223 @@
+/*
+ * dw_spi_mid.c - special handling for DW core on Intel MID platform
+ *
+ * Copyright (c) 2009, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/dw_spi.h>
+
+#ifdef CONFIG_SPI_DW_MID_DMA
+#include <linux/intel_mid_dma.h>
+#include <linux/pci.h>
+
+struct mid_dma {
+ struct intel_mid_dma_slave dmas_tx;
+ struct intel_mid_dma_slave dmas_rx;
+};
+
+static bool mid_spi_dma_chan_filter(struct dma_chan *chan, void *param)
+{
+ struct dw_spi *dws = param;
+
+ return dws->dmac && (&dws->dmac->dev == chan->device->dev);
+}
+
+static int mid_spi_dma_init(struct dw_spi *dws)
+{
+ struct mid_dma *dw_dma = dws->dma_priv;
+ struct intel_mid_dma_slave *rxs, *txs;
+ dma_cap_mask_t mask;
+
+ /*
+ * Get pci device for DMA controller, currently it could only
+ * be the DMA controller of either Moorestown or Medfield
+ */
+ dws->dmac = pci_get_device(PCI_VENDOR_ID_INTEL, 0x0813, NULL);
+ if (!dws->dmac)
+ dws->dmac = pci_get_device(PCI_VENDOR_ID_INTEL, 0x0827, NULL);
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ /* 1. Init rx channel */
+ dws->rxchan = dma_request_channel(mask, mid_spi_dma_chan_filter, dws);
+ if (!dws->rxchan)
+ goto err_exit;
+ rxs = &dw_dma->dmas_rx;
+ rxs->hs_mode = LNW_DMA_HW_HS;
+ rxs->cfg_mode = LNW_DMA_PER_TO_MEM;
+ dws->rxchan->private = rxs;
+
+ /* 2. Init tx channel */
+ dws->txchan = dma_request_channel(mask, mid_spi_dma_chan_filter, dws);
+ if (!dws->txchan)
+ goto free_rxchan;
+ txs = &dw_dma->dmas_tx;
+ txs->hs_mode = LNW_DMA_HW_HS;
+ txs->cfg_mode = LNW_DMA_MEM_TO_PER;
+ dws->txchan->private = txs;
+
+ dws->dma_inited = 1;
+ return 0;
+
+free_rxchan:
+ dma_release_channel(dws->rxchan);
+err_exit:
+ return -1;
+
+}
+
+static void mid_spi_dma_exit(struct dw_spi *dws)
+{
+ dma_release_channel(dws->txchan);
+ dma_release_channel(dws->rxchan);
+}
+
+/*
+ * dws->dma_chan_done is cleared before the dma transfer starts,
+ * callback for rx/tx channel will each increment it by 1.
+ * Reaching 2 means the whole spi transaction is done.
+ */
+static void dw_spi_dma_done(void *arg)
+{
+ struct dw_spi *dws = arg;
+
+ if (++dws->dma_chan_done != 2)
+ return;
+ dw_spi_xfer_done(dws);
+}
+
+static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change)
+{
+ struct dma_async_tx_descriptor *txdesc = NULL, *rxdesc = NULL;
+ struct dma_chan *txchan, *rxchan;
+ struct dma_slave_config txconf, rxconf;
+ u16 dma_ctrl = 0;
+
+ /* 1. setup DMA related registers */
+ if (cs_change) {
+ spi_enable_chip(dws, 0);
+ dw_writew(dws, dmardlr, 0xf);
+ dw_writew(dws, dmatdlr, 0x10);
+ if (dws->tx_dma)
+ dma_ctrl |= 0x2;
+ if (dws->rx_dma)
+ dma_ctrl |= 0x1;
+ dw_writew(dws, dmacr, dma_ctrl);
+ spi_enable_chip(dws, 1);
+ }
+
+ dws->dma_chan_done = 0;
+ txchan = dws->txchan;
+ rxchan = dws->rxchan;
+
+ /* 2. Prepare the TX dma transfer */
+ txconf.direction = DMA_TO_DEVICE;
+ txconf.dst_addr = dws->dma_addr;
+ txconf.dst_maxburst = LNW_DMA_MSIZE_16;
+ txconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ txconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
+
+ txchan->device->device_control(txchan, DMA_SLAVE_CONFIG,
+ (unsigned long) &txconf);
+
+ memset(&dws->tx_sgl, 0, sizeof(dws->tx_sgl));
+ dws->tx_sgl.dma_address = dws->tx_dma;
+ dws->tx_sgl.length = dws->len;
+
+ txdesc = txchan->device->device_prep_slave_sg(txchan,
+ &dws->tx_sgl,
+ 1,
+ DMA_TO_DEVICE,
+ DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_DEST_UNMAP);
+ txdesc->callback = dw_spi_dma_done;
+ txdesc->callback_param = dws;
+
+ /* 3. Prepare the RX dma transfer */
+ rxconf.direction = DMA_FROM_DEVICE;
+ rxconf.src_addr = dws->dma_addr;
+ rxconf.src_maxburst = LNW_DMA_MSIZE_16;
+ rxconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ rxconf.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
+
+ rxchan->device->device_control(rxchan, DMA_SLAVE_CONFIG,
+ (unsigned long) &rxconf);
+
+ memset(&dws->rx_sgl, 0, sizeof(dws->rx_sgl));
+ dws->rx_sgl.dma_address = dws->rx_dma;
+ dws->rx_sgl.length = dws->len;
+
+ rxdesc = rxchan->device->device_prep_slave_sg(rxchan,
+ &dws->rx_sgl,
+ 1,
+ DMA_FROM_DEVICE,
+ DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_DEST_UNMAP);
+ rxdesc->callback = dw_spi_dma_done;
+ rxdesc->callback_param = dws;
+
+ /* rx must be started before tx due to spi instinct */
+ rxdesc->tx_submit(rxdesc);
+ txdesc->tx_submit(txdesc);
+ return 0;
+}
+
+static struct dw_spi_dma_ops mid_dma_ops = {
+ .dma_init = mid_spi_dma_init,
+ .dma_exit = mid_spi_dma_exit,
+ .dma_transfer = mid_spi_dma_transfer,
+};
+#endif
+
+/* Some specific info for SPI0 controller on Moorestown */
+
+/* HW info for MRST CLk Control Unit, one 32b reg */
+#define MRST_SPI_CLK_BASE 100000000 /* 100m */
+#define MRST_CLK_SPI0_REG 0xff11d86c
+#define CLK_SPI_BDIV_OFFSET 0
+#define CLK_SPI_BDIV_MASK 0x00000007
+#define CLK_SPI_CDIV_OFFSET 9
+#define CLK_SPI_CDIV_MASK 0x00000e00
+#define CLK_SPI_DISABLE_OFFSET 8
+
+int dw_spi_mid_init(struct dw_spi *dws)
+{
+ u32 *clk_reg, clk_cdiv;
+
+ clk_reg = ioremap_nocache(MRST_CLK_SPI0_REG, 16);
+ if (!clk_reg)
+ return -ENOMEM;
+
+ /* get SPI controller operating freq info */
+ clk_cdiv = (readl(clk_reg) & CLK_SPI_CDIV_MASK) >> CLK_SPI_CDIV_OFFSET;
+ dws->max_freq = MRST_SPI_CLK_BASE / (clk_cdiv + 1);
+ iounmap(clk_reg);
+
+ dws->num_cs = 16;
+ dws->fifo_len = 40; /* FIFO has 40 words buffer */
+
+#ifdef CONFIG_SPI_DW_MID_DMA
+ dws->dma_priv = kzalloc(sizeof(struct mid_dma), GFP_KERNEL);
+ if (!dws->dma_priv)
+ return -ENOMEM;
+ dws->dma_ops = &mid_dma_ops;
+#endif
+ return 0;
+}