summaryrefslogtreecommitdiffstats
path: root/drivers/spi/xilinx_spi.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/spi/xilinx_spi.c')
-rw-r--r--drivers/spi/xilinx_spi.c358
1 files changed, 173 insertions, 185 deletions
diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c
index 46b8c5c2f45e..9f386379c169 100644
--- a/drivers/spi/xilinx_spi.c
+++ b/drivers/spi/xilinx_spi.c
@@ -14,22 +14,20 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-
-#include <linux/of_platform.h>
-#include <linux/of_device.h>
-#include <linux/of_spi.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
#include <linux/io.h>
+#include "xilinx_spi.h"
+#include <linux/spi/xilinx_spi.h>
+
#define XILINX_SPI_NAME "xilinx_spi"
/* Register definitions as per "OPB Serial Peripheral Interface (SPI) (v1.00e)
* Product Specification", DS464
*/
-#define XSPI_CR_OFFSET 0x62 /* 16-bit Control Register */
+#define XSPI_CR_OFFSET 0x60 /* Control Register */
#define XSPI_CR_ENABLE 0x02
#define XSPI_CR_MASTER_MODE 0x04
@@ -40,8 +38,9 @@
#define XSPI_CR_RXFIFO_RESET 0x40
#define XSPI_CR_MANUAL_SSELECT 0x80
#define XSPI_CR_TRANS_INHIBIT 0x100
+#define XSPI_CR_LSB_FIRST 0x200
-#define XSPI_SR_OFFSET 0x67 /* 8-bit Status Register */
+#define XSPI_SR_OFFSET 0x64 /* Status Register */
#define XSPI_SR_RX_EMPTY_MASK 0x01 /* Receive FIFO is empty */
#define XSPI_SR_RX_FULL_MASK 0x02 /* Receive FIFO is full */
@@ -49,8 +48,8 @@
#define XSPI_SR_TX_FULL_MASK 0x08 /* Transmit FIFO is full */
#define XSPI_SR_MODE_FAULT_MASK 0x10 /* Mode fault error */
-#define XSPI_TXD_OFFSET 0x6b /* 8-bit Data Transmit Register */
-#define XSPI_RXD_OFFSET 0x6f /* 8-bit Data Receive Register */
+#define XSPI_TXD_OFFSET 0x68 /* Data Transmit Register */
+#define XSPI_RXD_OFFSET 0x6c /* Data Receive Register */
#define XSPI_SSR_OFFSET 0x70 /* 32-bit Slave Select Register */
@@ -70,6 +69,7 @@
#define XSPI_INTR_TX_UNDERRUN 0x08 /* TxFIFO was underrun */
#define XSPI_INTR_RX_FULL 0x10 /* RxFIFO is full */
#define XSPI_INTR_RX_OVERRUN 0x20 /* RxFIFO was overrun */
+#define XSPI_INTR_TX_HALF_EMPTY 0x40 /* TxFIFO is half empty */
#define XIPIF_V123B_RESETR_OFFSET 0x40 /* IPIF reset register */
#define XIPIF_V123B_RESET_MASK 0x0a /* the value to write */
@@ -78,35 +78,85 @@ struct xilinx_spi {
/* bitbang has to be first */
struct spi_bitbang bitbang;
struct completion done;
-
+ struct resource mem; /* phys mem */
void __iomem *regs; /* virt. address of the control registers */
u32 irq;
- u32 speed_hz; /* SCK has a fixed frequency of speed_hz Hz */
-
u8 *rx_ptr; /* pointer in the Tx buffer */
const u8 *tx_ptr; /* pointer in the Rx buffer */
int remaining_bytes; /* the number of bytes left to transfer */
+ u8 bits_per_word;
+ unsigned int (*read_fn) (void __iomem *);
+ void (*write_fn) (u32, void __iomem *);
+ void (*tx_fn) (struct xilinx_spi *);
+ void (*rx_fn) (struct xilinx_spi *);
};
-static void xspi_init_hw(void __iomem *regs_base)
+static void xspi_tx8(struct xilinx_spi *xspi)
+{
+ xspi->write_fn(*xspi->tx_ptr, xspi->regs + XSPI_TXD_OFFSET);
+ xspi->tx_ptr++;
+}
+
+static void xspi_tx16(struct xilinx_spi *xspi)
+{
+ xspi->write_fn(*(u16 *)(xspi->tx_ptr), xspi->regs + XSPI_TXD_OFFSET);
+ xspi->tx_ptr += 2;
+}
+
+static void xspi_tx32(struct xilinx_spi *xspi)
+{
+ xspi->write_fn(*(u32 *)(xspi->tx_ptr), xspi->regs + XSPI_TXD_OFFSET);
+ xspi->tx_ptr += 4;
+}
+
+static void xspi_rx8(struct xilinx_spi *xspi)
+{
+ u32 data = xspi->read_fn(xspi->regs + XSPI_RXD_OFFSET);
+ if (xspi->rx_ptr) {
+ *xspi->rx_ptr = data & 0xff;
+ xspi->rx_ptr++;
+ }
+}
+
+static void xspi_rx16(struct xilinx_spi *xspi)
{
+ u32 data = xspi->read_fn(xspi->regs + XSPI_RXD_OFFSET);
+ if (xspi->rx_ptr) {
+ *(u16 *)(xspi->rx_ptr) = data & 0xffff;
+ xspi->rx_ptr += 2;
+ }
+}
+
+static void xspi_rx32(struct xilinx_spi *xspi)
+{
+ u32 data = xspi->read_fn(xspi->regs + XSPI_RXD_OFFSET);
+ if (xspi->rx_ptr) {
+ *(u32 *)(xspi->rx_ptr) = data;
+ xspi->rx_ptr += 4;
+ }
+}
+
+static void xspi_init_hw(struct xilinx_spi *xspi)
+{
+ void __iomem *regs_base = xspi->regs;
+
/* Reset the SPI device */
- out_be32(regs_base + XIPIF_V123B_RESETR_OFFSET,
- XIPIF_V123B_RESET_MASK);
+ xspi->write_fn(XIPIF_V123B_RESET_MASK,
+ regs_base + XIPIF_V123B_RESETR_OFFSET);
/* Disable all the interrupts just in case */
- out_be32(regs_base + XIPIF_V123B_IIER_OFFSET, 0);
+ xspi->write_fn(0, regs_base + XIPIF_V123B_IIER_OFFSET);
/* Enable the global IPIF interrupt */
- out_be32(regs_base + XIPIF_V123B_DGIER_OFFSET,
- XIPIF_V123B_GINTR_ENABLE);
+ xspi->write_fn(XIPIF_V123B_GINTR_ENABLE,
+ regs_base + XIPIF_V123B_DGIER_OFFSET);
/* Deselect the slave on the SPI bus */
- out_be32(regs_base + XSPI_SSR_OFFSET, 0xffff);
+ xspi->write_fn(0xffff, regs_base + XSPI_SSR_OFFSET);
/* Disable the transmitter, enable Manual Slave Select Assertion,
* put SPI controller into master mode, and enable it */
- out_be16(regs_base + XSPI_CR_OFFSET,
- XSPI_CR_TRANS_INHIBIT | XSPI_CR_MANUAL_SSELECT
- | XSPI_CR_MASTER_MODE | XSPI_CR_ENABLE);
+ xspi->write_fn(XSPI_CR_TRANS_INHIBIT | XSPI_CR_MANUAL_SSELECT |
+ XSPI_CR_MASTER_MODE | XSPI_CR_ENABLE | XSPI_CR_TXFIFO_RESET |
+ XSPI_CR_RXFIFO_RESET, regs_base + XSPI_CR_OFFSET);
}
static void xilinx_spi_chipselect(struct spi_device *spi, int is_on)
@@ -115,16 +165,16 @@ static void xilinx_spi_chipselect(struct spi_device *spi, int is_on)
if (is_on == BITBANG_CS_INACTIVE) {
/* Deselect the slave on the SPI bus */
- out_be32(xspi->regs + XSPI_SSR_OFFSET, 0xffff);
+ xspi->write_fn(0xffff, xspi->regs + XSPI_SSR_OFFSET);
} else if (is_on == BITBANG_CS_ACTIVE) {
/* Set the SPI clock phase and polarity */
- u16 cr = in_be16(xspi->regs + XSPI_CR_OFFSET)
+ u16 cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET)
& ~XSPI_CR_MODE_MASK;
if (spi->mode & SPI_CPHA)
cr |= XSPI_CR_CPHA;
if (spi->mode & SPI_CPOL)
cr |= XSPI_CR_CPOL;
- out_be16(xspi->regs + XSPI_CR_OFFSET, cr);
+ xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET);
/* We do not check spi->max_speed_hz here as the SPI clock
* frequency is not software programmable (the IP block design
@@ -132,24 +182,27 @@ static void xilinx_spi_chipselect(struct spi_device *spi, int is_on)
*/
/* Activate the chip select */
- out_be32(xspi->regs + XSPI_SSR_OFFSET,
- ~(0x0001 << spi->chip_select));
+ xspi->write_fn(~(0x0001 << spi->chip_select),
+ xspi->regs + XSPI_SSR_OFFSET);
}
}
/* spi_bitbang requires custom setup_transfer() to be defined if there is a
* custom txrx_bufs(). We have nothing to setup here as the SPI IP block
- * supports just 8 bits per word, and SPI clock can't be changed in software.
- * Check for 8 bits per word. Chip select delay calculations could be
+ * supports 8 or 16 bits per word which cannot be changed in software.
+ * SPI clock can't be changed in software either.
+ * Check for correct bits per word. Chip select delay calculations could be
* added here as soon as bitbang_work() can be made aware of the delay value.
*/
static int xilinx_spi_setup_transfer(struct spi_device *spi,
struct spi_transfer *t)
{
+ struct xilinx_spi *xspi = spi_master_get_devdata(spi->master);
u8 bits_per_word;
- bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word;
- if (bits_per_word != 8) {
+ bits_per_word = (t && t->bits_per_word)
+ ? t->bits_per_word : spi->bits_per_word;
+ if (bits_per_word != xspi->bits_per_word) {
dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
__func__, bits_per_word);
return -EINVAL;
@@ -160,17 +213,16 @@ static int xilinx_spi_setup_transfer(struct spi_device *spi,
static int xilinx_spi_setup(struct spi_device *spi)
{
- struct spi_bitbang *bitbang;
- struct xilinx_spi *xspi;
- int retval;
-
- xspi = spi_master_get_devdata(spi->master);
- bitbang = &xspi->bitbang;
-
- retval = xilinx_spi_setup_transfer(spi, NULL);
- if (retval < 0)
- return retval;
-
+ /* always return 0, we can not check the number of bits.
+ * There are cases when SPI setup is called before any driver is
+ * there, in that case the SPI core defaults to 8 bits, which we
+ * do not support in some cases. But if we return an error, the
+ * SPI device would not be registered and no driver can get hold of it
+ * When the driver is there, it will call SPI setup again with the
+ * correct number of bits per transfer.
+ * If a driver setups with the wrong bit number, it will fail when
+ * it tries to do a transfer
+ */
return 0;
}
@@ -179,15 +231,14 @@ static void xilinx_spi_fill_tx_fifo(struct xilinx_spi *xspi)
u8 sr;
/* Fill the Tx FIFO with as many bytes as possible */
- sr = in_8(xspi->regs + XSPI_SR_OFFSET);
+ sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET);
while ((sr & XSPI_SR_TX_FULL_MASK) == 0 && xspi->remaining_bytes > 0) {
- if (xspi->tx_ptr) {
- out_8(xspi->regs + XSPI_TXD_OFFSET, *xspi->tx_ptr++);
- } else {
- out_8(xspi->regs + XSPI_TXD_OFFSET, 0);
- }
- xspi->remaining_bytes--;
- sr = in_8(xspi->regs + XSPI_SR_OFFSET);
+ if (xspi->tx_ptr)
+ xspi->tx_fn(xspi);
+ else
+ xspi->write_fn(0, xspi->regs + XSPI_TXD_OFFSET);
+ xspi->remaining_bytes -= xspi->bits_per_word / 8;
+ sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET);
}
}
@@ -209,18 +260,19 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
/* Enable the transmit empty interrupt, which we use to determine
* progress on the transmission.
*/
- ipif_ier = in_be32(xspi->regs + XIPIF_V123B_IIER_OFFSET);
- out_be32(xspi->regs + XIPIF_V123B_IIER_OFFSET,
- ipif_ier | XSPI_INTR_TX_EMPTY);
+ ipif_ier = xspi->read_fn(xspi->regs + XIPIF_V123B_IIER_OFFSET);
+ xspi->write_fn(ipif_ier | XSPI_INTR_TX_EMPTY,
+ xspi->regs + XIPIF_V123B_IIER_OFFSET);
/* Start the transfer by not inhibiting the transmitter any longer */
- cr = in_be16(xspi->regs + XSPI_CR_OFFSET) & ~XSPI_CR_TRANS_INHIBIT;
- out_be16(xspi->regs + XSPI_CR_OFFSET, cr);
+ cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET) &
+ ~XSPI_CR_TRANS_INHIBIT;
+ xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET);
wait_for_completion(&xspi->done);
/* Disable the transmit empty interrupt */
- out_be32(xspi->regs + XIPIF_V123B_IIER_OFFSET, ipif_ier);
+ xspi->write_fn(ipif_ier, xspi->regs + XIPIF_V123B_IIER_OFFSET);
return t->len - xspi->remaining_bytes;
}
@@ -237,8 +289,8 @@ static irqreturn_t xilinx_spi_irq(int irq, void *dev_id)
u32 ipif_isr;
/* Get the IPIF interrupts, and clear them immediately */
- ipif_isr = in_be32(xspi->regs + XIPIF_V123B_IISR_OFFSET);
- out_be32(xspi->regs + XIPIF_V123B_IISR_OFFSET, ipif_isr);
+ ipif_isr = xspi->read_fn(xspi->regs + XIPIF_V123B_IISR_OFFSET);
+ xspi->write_fn(ipif_isr, xspi->regs + XIPIF_V123B_IISR_OFFSET);
if (ipif_isr & XSPI_INTR_TX_EMPTY) { /* Transmission completed */
u16 cr;
@@ -249,20 +301,15 @@ static irqreturn_t xilinx_spi_irq(int irq, void *dev_id)
* transmitter while the Isr refills the transmit register/FIFO,
* or make sure it is stopped if we're done.
*/
- cr = in_be16(xspi->regs + XSPI_CR_OFFSET);
- out_be16(xspi->regs + XSPI_CR_OFFSET,
- cr | XSPI_CR_TRANS_INHIBIT);
+ cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET);
+ xspi->write_fn(cr | XSPI_CR_TRANS_INHIBIT,
+ xspi->regs + XSPI_CR_OFFSET);
/* Read out all the data from the Rx FIFO */
- sr = in_8(xspi->regs + XSPI_SR_OFFSET);
+ sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET);
while ((sr & XSPI_SR_RX_EMPTY_MASK) == 0) {
- u8 data;
-
- data = in_8(xspi->regs + XSPI_RXD_OFFSET);
- if (xspi->rx_ptr) {
- *xspi->rx_ptr++ = data;
- }
- sr = in_8(xspi->regs + XSPI_SR_OFFSET);
+ xspi->rx_fn(xspi);
+ sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET);
}
/* See if there is more data to send */
@@ -271,7 +318,7 @@ static irqreturn_t xilinx_spi_irq(int irq, void *dev_id)
/* Start the transfer by not inhibiting the
* transmitter any longer
*/
- out_be16(xspi->regs + XSPI_CR_OFFSET, cr);
+ xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET);
} else {
/* No more data to send.
* Indicate the transfer is completed.
@@ -283,40 +330,22 @@ static irqreturn_t xilinx_spi_irq(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static int __init xilinx_spi_of_probe(struct of_device *ofdev,
- const struct of_device_id *match)
+struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem,
+ u32 irq, s16 bus_num)
{
struct spi_master *master;
struct xilinx_spi *xspi;
- struct resource r_irq_struct;
- struct resource r_mem_struct;
-
- struct resource *r_irq = &r_irq_struct;
- struct resource *r_mem = &r_mem_struct;
- int rc = 0;
- const u32 *prop;
- int len;
-
- /* Get resources(memory, IRQ) associated with the device */
- master = spi_alloc_master(&ofdev->dev, sizeof(struct xilinx_spi));
+ struct xspi_platform_data *pdata = dev->platform_data;
+ int ret;
- if (master == NULL) {
- return -ENOMEM;
+ if (!pdata) {
+ dev_err(dev, "No platform data attached\n");
+ return NULL;
}
- dev_set_drvdata(&ofdev->dev, master);
-
- rc = of_address_to_resource(ofdev->node, 0, r_mem);
- if (rc) {
- dev_warn(&ofdev->dev, "invalid address\n");
- goto put_master;
- }
-
- rc = of_irq_to_resource(ofdev->node, 0, r_irq);
- if (rc == NO_IRQ) {
- dev_warn(&ofdev->dev, "no IRQ found\n");
- goto put_master;
- }
+ master = spi_alloc_master(dev, sizeof(struct xilinx_spi));
+ if (!master)
+ return NULL;
/* the spi->mode bits understood by this driver: */
master->mode_bits = SPI_CPOL | SPI_CPHA;
@@ -329,128 +358,87 @@ static int __init xilinx_spi_of_probe(struct of_device *ofdev,
xspi->bitbang.master->setup = xilinx_spi_setup;
init_completion(&xspi->done);
- xspi->irq = r_irq->start;
-
- if (!request_mem_region(r_mem->start,
- r_mem->end - r_mem->start + 1, XILINX_SPI_NAME)) {
- rc = -ENXIO;
- dev_warn(&ofdev->dev, "memory request failure\n");
+ if (!request_mem_region(mem->start, resource_size(mem),
+ XILINX_SPI_NAME))
goto put_master;
- }
- xspi->regs = ioremap(r_mem->start, r_mem->end - r_mem->start + 1);
+ xspi->regs = ioremap(mem->start, resource_size(mem));
if (xspi->regs == NULL) {
- rc = -ENOMEM;
- dev_warn(&ofdev->dev, "ioremap failure\n");
- goto release_mem;
+ dev_warn(dev, "ioremap failure\n");
+ goto map_failed;
}
- xspi->irq = r_irq->start;
-
- /* dynamic bus assignment */
- master->bus_num = -1;
- /* number of slave select bits is required */
- prop = of_get_property(ofdev->node, "xlnx,num-ss-bits", &len);
- if (!prop || len < sizeof(*prop)) {
- dev_warn(&ofdev->dev, "no 'xlnx,num-ss-bits' property\n");
- goto unmap_io;
+ master->bus_num = bus_num;
+ master->num_chipselect = pdata->num_chipselect;
+
+ xspi->mem = *mem;
+ xspi->irq = irq;
+ if (pdata->little_endian) {
+ xspi->read_fn = ioread32;
+ xspi->write_fn = iowrite32;
+ } else {
+ xspi->read_fn = ioread32be;
+ xspi->write_fn = iowrite32be;
}
- master->num_chipselect = *prop;
+ xspi->bits_per_word = pdata->bits_per_word;
+ if (xspi->bits_per_word == 8) {
+ xspi->tx_fn = xspi_tx8;
+ xspi->rx_fn = xspi_rx8;
+ } else if (xspi->bits_per_word == 16) {
+ xspi->tx_fn = xspi_tx16;
+ xspi->rx_fn = xspi_rx16;
+ } else if (xspi->bits_per_word == 32) {
+ xspi->tx_fn = xspi_tx32;
+ xspi->rx_fn = xspi_rx32;
+ } else
+ goto unmap_io;
+
/* SPI controller initializations */
- xspi_init_hw(xspi->regs);
+ xspi_init_hw(xspi);
/* Register for SPI Interrupt */
- rc = request_irq(xspi->irq, xilinx_spi_irq, 0, XILINX_SPI_NAME, xspi);
- if (rc != 0) {
- dev_warn(&ofdev->dev, "irq request failure: %d\n", xspi->irq);
+ ret = request_irq(xspi->irq, xilinx_spi_irq, 0, XILINX_SPI_NAME, xspi);
+ if (ret)
goto unmap_io;
- }
- rc = spi_bitbang_start(&xspi->bitbang);
- if (rc != 0) {
- dev_err(&ofdev->dev, "spi_bitbang_start FAILED\n");
+ ret = spi_bitbang_start(&xspi->bitbang);
+ if (ret) {
+ dev_err(dev, "spi_bitbang_start FAILED\n");
goto free_irq;
}
- dev_info(&ofdev->dev, "at 0x%08X mapped to 0x%08X, irq=%d\n",
- (unsigned int)r_mem->start, (u32)xspi->regs, xspi->irq);
-
- /* Add any subnodes on the SPI bus */
- of_register_spi_devices(master, ofdev->node);
-
- return rc;
+ dev_info(dev, "at 0x%08llX mapped to 0x%p, irq=%d\n",
+ (unsigned long long)mem->start, xspi->regs, xspi->irq);
+ return master;
free_irq:
free_irq(xspi->irq, xspi);
unmap_io:
iounmap(xspi->regs);
-release_mem:
- release_mem_region(r_mem->start, resource_size(r_mem));
+map_failed:
+ release_mem_region(mem->start, resource_size(mem));
put_master:
spi_master_put(master);
- return rc;
+ return NULL;
}
+EXPORT_SYMBOL(xilinx_spi_init);
-static int __devexit xilinx_spi_remove(struct of_device *ofdev)
+void xilinx_spi_deinit(struct spi_master *master)
{
struct xilinx_spi *xspi;
- struct spi_master *master;
- struct resource r_mem;
- master = platform_get_drvdata(ofdev);
xspi = spi_master_get_devdata(master);
spi_bitbang_stop(&xspi->bitbang);
free_irq(xspi->irq, xspi);
iounmap(xspi->regs);
- if (!of_address_to_resource(ofdev->node, 0, &r_mem))
- release_mem_region(r_mem.start, resource_size(&r_mem));
- dev_set_drvdata(&ofdev->dev, 0);
- spi_master_put(xspi->bitbang.master);
-
- return 0;
-}
-
-/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:" XILINX_SPI_NAME);
-
-static int __exit xilinx_spi_of_remove(struct of_device *op)
-{
- return xilinx_spi_remove(op);
-}
-static struct of_device_id xilinx_spi_of_match[] = {
- { .compatible = "xlnx,xps-spi-2.00.a", },
- { .compatible = "xlnx,xps-spi-2.00.b", },
- {}
-};
-
-MODULE_DEVICE_TABLE(of, xilinx_spi_of_match);
-
-static struct of_platform_driver xilinx_spi_of_driver = {
- .owner = THIS_MODULE,
- .name = "xilinx-xps-spi",
- .match_table = xilinx_spi_of_match,
- .probe = xilinx_spi_of_probe,
- .remove = __exit_p(xilinx_spi_of_remove),
- .driver = {
- .name = "xilinx-xps-spi",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init xilinx_spi_init(void)
-{
- return of_register_platform_driver(&xilinx_spi_of_driver);
+ release_mem_region(xspi->mem.start, resource_size(&xspi->mem));
+ spi_master_put(xspi->bitbang.master);
}
-module_init(xilinx_spi_init);
+EXPORT_SYMBOL(xilinx_spi_deinit);
-static void __exit xilinx_spi_exit(void)
-{
- of_unregister_platform_driver(&xilinx_spi_of_driver);
-}
-module_exit(xilinx_spi_exit);
MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>");
MODULE_DESCRIPTION("Xilinx SPI driver");
MODULE_LICENSE("GPL");