diff options
Diffstat (limited to 'drivers/staging/comedi/drivers/s526.c')
| -rw-r--r-- | drivers/staging/comedi/drivers/s526.c | 90 |
1 files changed, 45 insertions, 45 deletions
diff --git a/drivers/staging/comedi/drivers/s526.c b/drivers/staging/comedi/drivers/s526.c index 20ac48e81514..c9bd985f9932 100644 --- a/drivers/staging/comedi/drivers/s526.c +++ b/drivers/staging/comedi/drivers/s526.c @@ -198,7 +198,7 @@ typedef struct { struct pci_dev *pci_dev; /* Used for AO readback */ - lsampl_t ao_readback[2]; + unsigned int ao_readback[2]; s526_gpct_config_t s526_gpct_config[4]; unsigned short s526_ai_config; @@ -246,23 +246,23 @@ static comedi_driver driver_s526 = { }; static int s526_gpct_rinsn(comedi_device * dev, comedi_subdevice * s, - comedi_insn * insn, lsampl_t * data); + comedi_insn * insn, unsigned int * data); static int s526_gpct_insn_config(comedi_device * dev, comedi_subdevice * s, - comedi_insn * insn, lsampl_t * data); + comedi_insn * insn, unsigned int * data); static int s526_gpct_winsn(comedi_device * dev, comedi_subdevice * s, - comedi_insn * insn, lsampl_t * data); + comedi_insn * insn, unsigned int * data); static int s526_ai_insn_config(comedi_device * dev, comedi_subdevice * s, - comedi_insn * insn, lsampl_t * data); + comedi_insn * insn, unsigned int * data); static int s526_ai_rinsn(comedi_device * dev, comedi_subdevice * s, - comedi_insn * insn, lsampl_t * data); + comedi_insn * insn, unsigned int * data); static int s526_ao_winsn(comedi_device * dev, comedi_subdevice * s, - comedi_insn * insn, lsampl_t * data); + comedi_insn * insn, unsigned int * data); static int s526_ao_rinsn(comedi_device * dev, comedi_subdevice * s, - comedi_insn * insn, lsampl_t * data); + comedi_insn * insn, unsigned int * data); static int s526_dio_insn_bits(comedi_device * dev, comedi_subdevice * s, - comedi_insn * insn, lsampl_t * data); + comedi_insn * insn, unsigned int * data); static int s526_dio_insn_config(comedi_device * dev, comedi_subdevice * s, - comedi_insn * insn, lsampl_t * data); + comedi_insn * insn, unsigned int * data); /* * Attach is called by the Comedi core to configure the driver @@ -275,7 +275,7 @@ static int s526_attach(comedi_device * dev, comedi_devconfig * it) comedi_subdevice *s; int iobase; int i, n; -// sampl_t value; +// short value; // int subdev_channel = 0; printk("comedi%d: s526: ", dev->minor); @@ -428,11 +428,11 @@ static int s526_attach(comedi_device * dev, comedi_devconfig * it) printk("Read back mode reg=0x%04x\n", inw(ADDR_CHAN_REG(REG_C0M, n))); // Load the pre-laod register high word -// value = (sampl_t) (0x55); +// value = (short) (0x55); // outw(value, ADDR_CHAN_REG(REG_C0H, n)); // Load the pre-laod register low word -// value = (sampl_t)(0xaa55); +// value = (short)(0xaa55); // outw(value, ADDR_CHAN_REG(REG_C0L, n)); // Write the Counter Control Register @@ -477,7 +477,7 @@ static int s526_detach(comedi_device * dev) } static int s526_gpct_rinsn(comedi_device * dev, comedi_subdevice * s, - comedi_insn * insn, lsampl_t * data) + comedi_insn * insn, unsigned int * data) { int i; // counts the Data int counter_channel = CR_CHAN(insn->chanspec); @@ -501,11 +501,11 @@ static int s526_gpct_rinsn(comedi_device * dev, comedi_subdevice * s, } static int s526_gpct_insn_config(comedi_device * dev, comedi_subdevice * s, - comedi_insn * insn, lsampl_t * data) + comedi_insn * insn, unsigned int * data) { int subdev_channel = CR_CHAN(insn->chanspec); // Unpack chanspec int i; - sampl_t value; + short value; // printk("s526: GPCT_INSN_CONFIG: Configuring Channel %d\n", subdev_channel); @@ -602,20 +602,20 @@ static int s526_gpct_insn_config(comedi_device * dev, comedi_subdevice * s, cmReg.reg.autoLoadResetRcap = 4; // Auto load with INDEX^ // Set Counter Mode Register - cmReg.value = (sampl_t) (insn->data[1] & 0xFFFF); + cmReg.value = (short) (insn->data[1] & 0xFFFF); outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel)); // Load the pre-laod register high word - value = (sampl_t) ((insn->data[2] >> 16) & 0xFFFF); + value = (short) ((insn->data[2] >> 16) & 0xFFFF); outw(value, ADDR_CHAN_REG(REG_C0H, subdev_channel)); // Load the pre-laod register low word - value = (sampl_t) (insn->data[2] & 0xFFFF); + value = (short) (insn->data[2] & 0xFFFF); outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel)); // Write the Counter Control Register if (insn->data[3] != 0) { - value = (sampl_t) (insn->data[3] & 0xFFFF); + value = (short) (insn->data[3] & 0xFFFF); outw(value, ADDR_CHAN_REG(REG_C0C, subdev_channel)); } // Reset the counter if it is software preload @@ -639,34 +639,34 @@ static int s526_gpct_insn_config(comedi_device * dev, comedi_subdevice * s, SinglePulseGeneration; // Set Counter Mode Register - cmReg.value = (sampl_t) (insn->data[1] & 0xFFFF); + cmReg.value = (short) (insn->data[1] & 0xFFFF); cmReg.reg.preloadRegSel = 0; // PR0 outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel)); // Load the pre-laod register 0 high word - value = (sampl_t) ((insn->data[2] >> 16) & 0xFFFF); + value = (short) ((insn->data[2] >> 16) & 0xFFFF); outw(value, ADDR_CHAN_REG(REG_C0H, subdev_channel)); // Load the pre-laod register 0 low word - value = (sampl_t) (insn->data[2] & 0xFFFF); + value = (short) (insn->data[2] & 0xFFFF); outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel)); // Set Counter Mode Register - cmReg.value = (sampl_t) (insn->data[1] & 0xFFFF); + cmReg.value = (short) (insn->data[1] & 0xFFFF); cmReg.reg.preloadRegSel = 1; // PR1 outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel)); // Load the pre-laod register 1 high word - value = (sampl_t) ((insn->data[3] >> 16) & 0xFFFF); + value = (short) ((insn->data[3] >> 16) & 0xFFFF); outw(value, ADDR_CHAN_REG(REG_C0H, subdev_channel)); // Load the pre-laod register 1 low word - value = (sampl_t) (insn->data[3] & 0xFFFF); + value = (short) (insn->data[3] & 0xFFFF); outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel)); // Write the Counter Control Register if (insn->data[3] != 0) { - value = (sampl_t) (insn->data[3] & 0xFFFF); + value = (short) (insn->data[3] & 0xFFFF); outw(value, ADDR_CHAN_REG(REG_C0C, subdev_channel)); } break; @@ -684,34 +684,34 @@ static int s526_gpct_insn_config(comedi_device * dev, comedi_subdevice * s, PulseTrainGeneration; // Set Counter Mode Register - cmReg.value = (sampl_t) (insn->data[1] & 0xFFFF); + cmReg.value = (short) (insn->data[1] & 0xFFFF); cmReg.reg.preloadRegSel = 0; // PR0 outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel)); // Load the pre-laod register 0 high word - value = (sampl_t) ((insn->data[2] >> 16) & 0xFFFF); + value = (short) ((insn->data[2] >> 16) & 0xFFFF); outw(value, ADDR_CHAN_REG(REG_C0H, subdev_channel)); // Load the pre-laod register 0 low word - value = (sampl_t) (insn->data[2] & 0xFFFF); + value = (short) (insn->data[2] & 0xFFFF); outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel)); // Set Counter Mode Register - cmReg.value = (sampl_t) (insn->data[1] & 0xFFFF); + cmReg.value = (short) (insn->data[1] & 0xFFFF); cmReg.reg.preloadRegSel = 1; // PR1 outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel)); // Load the pre-laod register 1 high word - value = (sampl_t) ((insn->data[3] >> 16) & 0xFFFF); + value = (short) ((insn->data[3] >> 16) & 0xFFFF); outw(value, ADDR_CHAN_REG(REG_C0H, subdev_channel)); // Load the pre-laod register 1 low word - value = (sampl_t) (insn->data[3] & 0xFFFF); + value = (short) (insn->data[3] & 0xFFFF); outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel)); // Write the Counter Control Register if (insn->data[3] != 0) { - value = (sampl_t) (insn->data[3] & 0xFFFF); + value = (short) (insn->data[3] & 0xFFFF); outw(value, ADDR_CHAN_REG(REG_C0C, subdev_channel)); } break; @@ -726,10 +726,10 @@ static int s526_gpct_insn_config(comedi_device * dev, comedi_subdevice * s, } static int s526_gpct_winsn(comedi_device * dev, comedi_subdevice * s, - comedi_insn * insn, lsampl_t * data) + comedi_insn * insn, unsigned int * data) { int subdev_channel = CR_CHAN(insn->chanspec); // Unpack chanspec - sampl_t value; + short value; printk("s526: GPCT_INSN_WRITE on channel %d\n", subdev_channel); cmReg.value = inw(ADDR_CHAN_REG(REG_C0M, subdev_channel)); @@ -769,9 +769,9 @@ static int s526_gpct_winsn(comedi_device * dev, comedi_subdevice * s, return -EINVAL; } - value = (sampl_t) ((*data >> 16) & 0xFFFF); + value = (short) ((*data >> 16) & 0xFFFF); outw(value, ADDR_CHAN_REG(REG_C0H, subdev_channel)); - value = (sampl_t) (*data & 0xFFFF); + value = (short) (*data & 0xFFFF); outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel)); break; default: // Impossible @@ -785,7 +785,7 @@ static int s526_gpct_winsn(comedi_device * dev, comedi_subdevice * s, #define ISR_ADC_DONE 0x4 static int s526_ai_insn_config(comedi_device * dev, comedi_subdevice * s, - comedi_insn * insn, lsampl_t * data) + comedi_insn * insn, unsigned int * data) { int result = -EINVAL; @@ -818,7 +818,7 @@ static int s526_ai_insn_config(comedi_device * dev, comedi_subdevice * s, * mode. */ static int s526_ai_rinsn(comedi_device * dev, comedi_subdevice * s, - comedi_insn * insn, lsampl_t * data) + comedi_insn * insn, unsigned int * data) { int n, i; int chan = CR_CHAN(insn->chanspec); @@ -868,7 +868,7 @@ static int s526_ai_rinsn(comedi_device * dev, comedi_subdevice * s, } static int s526_ao_winsn(comedi_device * dev, comedi_subdevice * s, - comedi_insn * insn, lsampl_t * data) + comedi_insn * insn, unsigned int * data) { int i; int chan = CR_CHAN(insn->chanspec); @@ -897,7 +897,7 @@ static int s526_ao_winsn(comedi_device * dev, comedi_subdevice * s, /* AO subdevices should have a read insn as well as a write insn. * Usually this means copying a value stored in devpriv. */ static int s526_ao_rinsn(comedi_device * dev, comedi_subdevice * s, - comedi_insn * insn, lsampl_t * data) + comedi_insn * insn, unsigned int * data) { int i; int chan = CR_CHAN(insn->chanspec); @@ -914,7 +914,7 @@ static int s526_ao_rinsn(comedi_device * dev, comedi_subdevice * s, * This allows packed reading/writing of the DIO channels. The * comedi core can convert between insn_bits and insn_read/write */ static int s526_dio_insn_bits(comedi_device * dev, comedi_subdevice * s, - comedi_insn * insn, lsampl_t * data) + comedi_insn * insn, unsigned int * data) { if (insn->n != 2) return -EINVAL; @@ -939,10 +939,10 @@ static int s526_dio_insn_bits(comedi_device * dev, comedi_subdevice * s, } static int s526_dio_insn_config(comedi_device * dev, comedi_subdevice * s, - comedi_insn * insn, lsampl_t * data) + comedi_insn * insn, unsigned int * data) { int chan = CR_CHAN(insn->chanspec); - sampl_t value; + short value; printk("S526 DIO insn_config\n"); |