diff options
Diffstat (limited to 'drivers/staging/rtl8192su/r8192U_dm.c')
| -rw-r--r-- | drivers/staging/rtl8192su/r8192U_dm.c | 178 |
1 files changed, 1 insertions, 177 deletions
diff --git a/drivers/staging/rtl8192su/r8192U_dm.c b/drivers/staging/rtl8192su/r8192U_dm.c index ef1dcc2e88f8..5f970e4dfd2f 100644 --- a/drivers/staging/rtl8192su/r8192U_dm.c +++ b/drivers/staging/rtl8192su/r8192U_dm.c @@ -15,7 +15,6 @@ Major Change History: --*/ -#ifdef RTL8192SU #include "r8192U.h" #include "r8192U_dm.h" //#include "r8190_rtl8256.h" @@ -23,15 +22,6 @@ Major Change History: #include "r8192S_hw.h" #include "r8192S_phy.h" #include "r8192S_phyreg.h" -#else -#include "r8192U.h" -#include "r8192U_dm.h" -#include "r8192U_hw.h" -#include "r819xU_phy.h" -#include "r819xU_phyreg.h" -#include "r8190_rtl8256.h" -#include "r819xU_cmdpkt.h" -#endif /*---------------------------Define Local Constant---------------------------*/ // @@ -50,7 +40,6 @@ typedef enum _HT_IOT_PEER }HT_IOT_PEER_E, *PHTIOT_PEER_E; #endif #if 1 -#ifdef RTL8192SU static u32 edca_setting_DL[HT_IOT_PEER_MAX] = // UNKNOWN REALTEK_90 /*REALTEK_92SE*/ BROADCOM RALINK ATHEROS CISCO MARVELL 92U_AP SELF_AP { 0xa44f, 0x5ea44f, 0x5ea44f, 0xa44f, 0xa44f, 0xa44f, 0xa630, 0xa42b, 0x5e4322, 0x5e4322}; @@ -58,14 +47,6 @@ typedef enum _HT_IOT_PEER // UNKNOWN REALTEK /*REALTEK_92SE*/ BROADCOM RALINK ATHEROS CISCO MARVELL 92U_AP SELF_AP { 0x5ea44f, 0xa44f, 0x5ea44f, 0x5e4322, 0x5ea422, 0x5e4322, 0x3ea44f, 0x5ea42b, 0x5e4322, 0x5e4322}; -#else - -static u32 edca_setting_DL[HT_IOT_PEER_MAX] = - { 0x5e4322, 0x5e4322, 0x5ea44f, 0x5e4322, 0x604322, 0xa44f, 0x5ea44f}; -static u32 edca_setting_UL[HT_IOT_PEER_MAX] = - { 0x5e4322, 0xa44f, 0x5ea44f, 0x5e4322, 0x604322, 0x5ea44f, 0x5ea44f}; - -#endif #endif #define RTK_UL_EDCA 0xa44f @@ -202,7 +183,6 @@ static void dm_ctstoself(struct net_device *dev); //================================================================================ // HW Dynamic mechanism interface. //================================================================================ -#ifdef RTL8192SU static void dm_CheckAggrPolicy(struct net_device *dev) { struct r8192_priv *priv = ieee80211_priv(dev); @@ -273,7 +253,6 @@ static void dm_CheckAggrPolicy(struct net_device *dev) lastTxOkCnt = priv->stats.txbytesunicast; lastRxOkCnt = priv->stats.rxbytesunicast; } -#endif // // Description: // Prepare SW resource for HW dynamic mechanism. @@ -293,11 +272,7 @@ init_hal_dm(struct net_device *dev) //Initial TX Power Control for near/far range , add by amy 2008/05/15, porting from windows code. dm_init_dynamic_txpower(dev); init_rate_adaptive(dev); -#ifdef RTL8192SU dm_initialize_txpower_tracking(dev); -#else - //dm_initialize_txpower_tracking(dev); -#endif dm_dig_init(dev); dm_init_edca_turbo(dev); dm_init_bandwidth_autoswitch(dev); @@ -317,7 +292,6 @@ extern void deinit_hal_dm(struct net_device *dev) -#ifdef RTL8192SU //#if 0 extern void hal_dm_watchdog(struct net_device *dev) { @@ -372,31 +346,6 @@ extern void hal_dm_watchdog(struct net_device *dev) dm_ctstoself(dev); } //HalDmWatchDog -#else -extern void hal_dm_watchdog(struct net_device *dev) -{ - //struct r8192_priv *priv = ieee80211_priv(dev); - - //static u8 previous_bssid[6] ={0}; - - /*Add by amy 2008/05/15 ,porting from windows code.*/ - dm_check_rate_adaptive(dev); - dm_dynamic_txpower(dev); - dm_check_txrateandretrycount(dev); - dm_check_txpower_tracking(dev); - dm_ctrl_initgain_byrssi(dev); - dm_check_edca_turbo(dev); - dm_bandwidth_autoswitch(dev); - dm_check_rfctrl_gpio(dev); - dm_check_rx_path_selection(dev); - dm_check_fsync(dev); - - // Add by amy 2008-05-15 porting from windows code. - dm_check_pbc_gpio(dev); - dm_send_rssi_tofw(dev); - dm_ctstoself(dev); -} //HalDmWatchDog -#endif /* * Decide Rate Adaptive Set according to distance (signal strength) @@ -1595,37 +1544,15 @@ static void dm_InitializeTXPowerTracking_TSSI(struct net_device *dev) } -#ifndef RTL8192SU -static void dm_InitializeTXPowerTracking_ThermalMeter(struct net_device *dev) -{ - struct r8192_priv *priv = ieee80211_priv(dev); - - // Tx Power tracking by Theremal Meter require Firmware R/W 3-wire. This mechanism - // can be enabled only when Firmware R/W 3-wire is enabled. Otherwise, frequent r/w - // 3-wire by driver cause RF goes into wrong state. - if(priv->ieee80211->FwRWRF) - priv->btxpower_tracking = TRUE; - else - priv->btxpower_tracking = FALSE; - priv->txpower_count = 0; - priv->btxpower_trackingInit = FALSE; -} -#endif void dm_initialize_txpower_tracking(struct net_device *dev) { #if (defined RTL8190P) dm_InitializeTXPowerTracking_TSSI(dev); -#elif (defined RTL8192SU) +#else // 2009/01/12 MH Enable for 92S series channel 1-14 CCK tx pwer setting for MP. // dm_InitializeTXPowerTracking_TSSI(dev); -#else - struct r8192_priv *priv = ieee80211_priv(dev); - if(priv->bDcut == TRUE) - dm_InitializeTXPowerTracking_TSSI(dev); - else - dm_InitializeTXPowerTracking_ThermalMeter(dev); #endif }// dm_InitializeTXPowerTracking @@ -1683,17 +1610,10 @@ static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev) //Attention!! You have to wirte all 12bits data to RF, or it may cause RF to crash //actually write reg0x02 bit1=0, then bit1=1. //DbgPrint("Trigger ThermalMeter, write RF reg0x2 = 0x4d to 0x4f\n"); -#ifdef RTL8192SU rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bRFRegOffsetMask, 0x4d); rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bRFRegOffsetMask, 0x4f); rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bRFRegOffsetMask, 0x4d); rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bRFRegOffsetMask, 0x4f); -#else - rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4d); - rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4f); - rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4d); - rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4f); -#endif TM_Trigger = 1; return; } @@ -2021,14 +1941,12 @@ extern void dm_change_dynamic_initgain_thresh(struct net_device *dev, u32 dm_type, u32 dm_value) { -#ifdef RTL8192SU struct r8192_priv *priv = ieee80211_priv(dev); if(dm_type == DIG_TYPE_THRESH_HIGHPWR_HIGH) priv->MidHighPwrTHR_L2 = (u8)dm_value; else if(dm_type == DIG_TYPE_THRESH_HIGHPWR_LOW) priv->MidHighPwrTHR_L1 = (u8)dm_value; return; -#endif if (dm_type == DIG_TYPE_THRESH_HIGH) { dm_digtable.rssi_high_thresh = dm_value; @@ -2400,15 +2318,7 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm( { /* 2008/01/11 MH 40MHZ 90/92 register are not the same. */ // 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same. -#ifdef RTL8192SU rtl8192_setBBreg(dev, (rOFDM0_XATxAFE+3), bMaskByte0, 0x00); -#else - #ifdef RTL8190P - write_nic_byte(dev, rOFDM0_RxDetector1, 0x40); - #else - write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x00); - #endif -#endif /*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P) write_nic_byte(pAdapter, rOFDM0_RxDetector1, 0x40); */ @@ -2552,15 +2462,7 @@ static void dm_ctrl_initgain_byrssi_highpwr( // 3.1 Higher PD_TH for OFDM for high power state. if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) { -#ifdef RTL8192SU rtl8192_setBBreg(dev, (rOFDM0_XATxAFE+3), bMaskByte0, 0x10); -#else - #ifdef RTL8190P - write_nic_byte(dev, rOFDM0_RxDetector1, 0x41); - #else - write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x10); - #endif -#endif /*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P) write_nic_byte(dev, rOFDM0_RxDetector1, 0x41); */ @@ -2727,15 +2629,7 @@ static void dm_pd_th( { /* 2008/01/11 MH 40MHZ 90/92 register are not the same. */ // 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same. -#ifdef RTL8192SU rtl8192_setBBreg(dev, (rOFDM0_XATxAFE+3), bMaskByte0, 0x00); -#else - #ifdef RTL8190P - write_nic_byte(dev, rOFDM0_RxDetector1, 0x40); - #else - write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x00); - #endif -#endif /*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P) write_nic_byte(dev, rOFDM0_RxDetector1, 0x40); */ @@ -2899,7 +2793,6 @@ static void dm_check_edca_turbo( { curTxOkCnt = priv->stats.txbytesunicast - lastTxOkCnt; curRxOkCnt = priv->stats.rxbytesunicast - lastRxOkCnt; -#ifdef RTL8192SU // Modify EDCA parameters selection bias // For some APs, use downlink EDCA parameters for uplink+downlink if(priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_EDCA_BIAS_ON_RX) @@ -2942,31 +2835,6 @@ static void dm_check_edca_turbo( } priv->bcurrent_turbo_EDCA = true; } -#else - // For RT-AP, we needs to turn it on when Rx>Tx - if(curRxOkCnt > 4*curTxOkCnt) - { - //printk("%s():curRxOkCnt > 4*curTxOkCnt\n"); - if(!priv->bis_cur_rdlstate || !priv->bcurrent_turbo_EDCA) - { - write_nic_dword(dev, EDCAPARA_BE, edca_setting_DL[pHTInfo->IOTPeer]); - priv->bis_cur_rdlstate = true; - } - } - else - { - - //printk("%s():curRxOkCnt < 4*curTxOkCnt\n"); - if(priv->bis_cur_rdlstate || !priv->bcurrent_turbo_EDCA) - { - write_nic_dword(dev, EDCAPARA_BE, edca_setting_UL[pHTInfo->IOTPeer]); - priv->bis_cur_rdlstate = false; - } - - } - - priv->bcurrent_turbo_EDCA = true; -#endif } else { @@ -3212,9 +3080,7 @@ static void dm_check_rfctrl_gpio(struct net_device * dev) #ifdef RTL8192U return; #endif -#ifdef RTL8192SU return; -#endif #ifdef RTL8192E queue_delayed_work(priv->priv_wq,&priv->gpio_change_rf_wq,0); #endif @@ -3257,7 +3123,6 @@ static void dm_check_pbc_gpio(struct net_device *dev) priv->bpbc_pressed = true; } #endif -#ifdef RTL8192SU struct r8192_priv *priv = ieee80211_priv(dev); u8 tmp1byte; @@ -3283,7 +3148,6 @@ static void dm_check_pbc_gpio(struct net_device *dev) priv->bpbc_pressed = true; } -#endif } @@ -3862,15 +3726,7 @@ extern void dm_fsync_timer_callback(unsigned long data) write_nic_byte(dev, 0xC3e, 0x96); } priv->ContiuneDiffCount = 0; -#ifdef RTL8192SU rtl8192_setBBreg(dev, rOFDM0_RxDetector2, bMaskDWord, 0x164052cd); -#else - #ifdef RTL8190P - write_nic_dword(dev, rOFDM0_RxDetector2, 0x164052cd); - #else - write_nic_dword(dev, rOFDM0_RxDetector2, 0x465c52cd); - #endif -#endif } RT_TRACE(COMP_HALDM, "ContiuneDiffCount %d\n", priv->ContiuneDiffCount); RT_TRACE(COMP_HALDM, "rateRecord %d rateCount %d, rateCountdiff %d bSwitchFsync %d\n", priv->rate_record, rate_count, rate_count_diff , priv->bswitch_fsync); @@ -4283,16 +4139,6 @@ static void dm_dynamic_txpower(struct net_device *dev) (priv->bDynamicTxLowPower != priv->bLastDTPFlag_Low ) ) { RT_TRACE(COMP_TXAGC,"SetTxPowerLevel8190() channel = %d \n" , priv->ieee80211->current_network.channel); -#ifndef RTL8192SU -#if defined(RTL8190P) || defined(RTL8192E) - SetTxPowerLevel8190(Adapter,pHalData->CurrentChannel); -#endif - -#ifdef RTL8192U - rtl8192_phy_setTxPower(dev,priv->ieee80211->current_network.channel); - //pHalData->bStartTxCtrlByTPCNFR = FALSE; //Clear th flag of Set TX Power from Sitesurvey -#endif -#endif } priv->bLastDTPFlag_High = priv->bDynamicTxHighPower; priv->bLastDTPFlag_Low = priv->bDynamicTxLowPower; @@ -4306,11 +4152,7 @@ static void dm_check_txrateandretrycount(struct net_device * dev) struct ieee80211_device* ieee = priv->ieee80211; //for 11n tx rate // priv->stats.CurrentShowTxate = read_nic_byte(dev, Current_Tx_Rate_Reg); -#ifdef RTL8192SU ieee->softmac_stats.CurrentShowTxate = read_nic_byte(dev, TX_RATE_REG); -#else - ieee->softmac_stats.CurrentShowTxate = read_nic_byte(dev, Current_Tx_Rate_Reg); -#endif //printk("=============>tx_rate_reg:%x\n", ieee->softmac_stats.CurrentShowTxate); //for initial tx rate // priv->stats.last_packet_rate = read_nic_byte(dev, Initial_Tx_Rate_Reg); @@ -4322,24 +4164,6 @@ static void dm_check_txrateandretrycount(struct net_device * dev) static void dm_send_rssi_tofw(struct net_device *dev) { -#ifndef RTL8192SU - DCMD_TXCMD_T tx_cmd; - struct r8192_priv *priv = ieee80211_priv(dev); - - // If we test chariot, we should stop the TX command ? - // Because 92E will always silent reset when we send tx command. We use register - // 0x1e0(byte) to botify driver. - write_nic_byte(dev, DRIVER_RSSI, (u8)priv->undecorated_smoothed_pwdb); - return; -#if 1 - tx_cmd.Op = TXCMD_SET_RX_RSSI; - tx_cmd.Length = 4; - tx_cmd.Value = priv->undecorated_smoothed_pwdb; - - cmpk_message_handle_tx(dev, (u8*)&tx_cmd, - DESC_PACKET_TYPE_INIT, sizeof(DCMD_TXCMD_T)); -#endif -#endif } #ifdef TO_DO_LIST |