summaryrefslogtreecommitdiffstats
path: root/drivers/tty/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/Kconfig')
-rw-r--r--drivers/tty/Kconfig321
1 files changed, 321 insertions, 0 deletions
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
new file mode 100644
index 000000000000..3fd7199301b6
--- /dev/null
+++ b/drivers/tty/Kconfig
@@ -0,0 +1,321 @@
+config VT
+ bool "Virtual terminal" if EXPERT
+ depends on !S390
+ select INPUT
+ default y
+ ---help---
+ If you say Y here, you will get support for terminal devices with
+ display and keyboard devices. These are called "virtual" because you
+ can run several virtual terminals (also called virtual consoles) on
+ one physical terminal. This is rather useful, for example one
+ virtual terminal can collect system messages and warnings, another
+ one can be used for a text-mode user session, and a third could run
+ an X session, all in parallel. Switching between virtual terminals
+ is done with certain key combinations, usually Alt-<function key>.
+
+ The setterm command ("man setterm") can be used to change the
+ properties (such as colors or beeping) of a virtual terminal. The
+ man page console_codes(4) ("man console_codes") contains the special
+ character sequences that can be used to change those properties
+ directly. The fonts used on virtual terminals can be changed with
+ the setfont ("man setfont") command and the key bindings are defined
+ with the loadkeys ("man loadkeys") command.
+
+ You need at least one virtual terminal device in order to make use
+ of your keyboard and monitor. Therefore, only people configuring an
+ embedded system would want to say N here in order to save some
+ memory; the only way to log into such a system is then via a serial
+ or network connection.
+
+ If unsure, say Y, or else you won't be able to do much with your new
+ shiny Linux system :-)
+
+config CONSOLE_TRANSLATIONS
+ depends on VT
+ default y
+ bool "Enable character translations in console" if EXPERT
+ ---help---
+ This enables support for font mapping and Unicode translation
+ on virtual consoles.
+
+config VT_CONSOLE
+ bool "Support for console on virtual terminal" if EXPERT
+ depends on VT
+ default y
+ ---help---
+ The system console is the device which receives all kernel messages
+ and warnings and which allows logins in single user mode. If you
+ answer Y here, a virtual terminal (the device used to interact with
+ a physical terminal) can be used as system console. This is the most
+ common mode of operations, so you should say Y here unless you want
+ the kernel messages be output only to a serial port (in which case
+ you should say Y to "Console on serial port", below).
+
+ If you do say Y here, by default the currently visible virtual
+ terminal (/dev/tty0) will be used as system console. You can change
+ that with a kernel command line option such as "console=tty3" which
+ would use the third virtual terminal as system console. (Try "man
+ bootparam" or see the documentation of your boot loader (lilo or
+ loadlin) about how to pass options to the kernel at boot time.)
+
+ If unsure, say Y.
+
+config HW_CONSOLE
+ bool
+ depends on VT && !S390 && !UML
+ default y
+
+config VT_HW_CONSOLE_BINDING
+ bool "Support for binding and unbinding console drivers"
+ depends on HW_CONSOLE
+ default n
+ ---help---
+ The virtual terminal is the device that interacts with the physical
+ terminal through console drivers. On these systems, at least one
+ console driver is loaded. In other configurations, additional console
+ drivers may be enabled, such as the framebuffer console. If more than
+ 1 console driver is enabled, setting this to 'y' will allow you to
+ select the console driver that will serve as the backend for the
+ virtual terminals.
+
+ See <file:Documentation/console/console.txt> for more
+ information. For framebuffer console users, please refer to
+ <file:Documentation/fb/fbcon.txt>.
+
+config UNIX98_PTYS
+ bool "Unix98 PTY support" if EXPERT
+ default y
+ ---help---
+ A pseudo terminal (PTY) is a software device consisting of two
+ halves: a master and a slave. The slave device behaves identical to
+ a physical terminal; the master device is used by a process to
+ read data from and write data to the slave, thereby emulating a
+ terminal. Typical programs for the master side are telnet servers
+ and xterms.
+
+ Linux has traditionally used the BSD-like names /dev/ptyxx for
+ masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
+ has a number of problems. The GNU C library glibc 2.1 and later,
+ however, supports the Unix98 naming standard: in order to acquire a
+ pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
+ terminal is then made available to the process and the pseudo
+ terminal slave can be accessed as /dev/pts/<number>. What was
+ traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
+
+ All modern Linux systems use the Unix98 ptys. Say Y unless
+ you're on an embedded system and want to conserve memory.
+
+config DEVPTS_MULTIPLE_INSTANCES
+ bool "Support multiple instances of devpts"
+ depends on UNIX98_PTYS
+ default n
+ ---help---
+ Enable support for multiple instances of devpts filesystem.
+ If you want to have isolated PTY namespaces (eg: in containers),
+ say Y here. Otherwise, say N. If enabled, each mount of devpts
+ filesystem with the '-o newinstance' option will create an
+ independent PTY namespace.
+
+config LEGACY_PTYS
+ bool "Legacy (BSD) PTY support"
+ default y
+ ---help---
+ A pseudo terminal (PTY) is a software device consisting of two
+ halves: a master and a slave. The slave device behaves identical to
+ a physical terminal; the master device is used by a process to
+ read data from and write data to the slave, thereby emulating a
+ terminal. Typical programs for the master side are telnet servers
+ and xterms.
+
+ Linux has traditionally used the BSD-like names /dev/ptyxx
+ for masters and /dev/ttyxx for slaves of pseudo
+ terminals. This scheme has a number of problems, including
+ security. This option enables these legacy devices; on most
+ systems, it is safe to say N.
+
+
+config LEGACY_PTY_COUNT
+ int "Maximum number of legacy PTY in use"
+ depends on LEGACY_PTYS
+ range 0 256
+ default "256"
+ ---help---
+ The maximum number of legacy PTYs that can be used at any one time.
+ The default is 256, and should be more than enough. Embedded
+ systems may want to reduce this to save memory.
+
+ When not in use, each legacy PTY occupies 12 bytes on 32-bit
+ architectures and 24 bytes on 64-bit architectures.
+
+config BFIN_JTAG_COMM
+ tristate "Blackfin JTAG Communication"
+ depends on BLACKFIN
+ help
+ Add support for emulating a TTY device over the Blackfin JTAG.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bfin_jtag_comm.
+
+config BFIN_JTAG_COMM_CONSOLE
+ bool "Console on Blackfin JTAG"
+ depends on BFIN_JTAG_COMM=y
+
+config SERIAL_NONSTANDARD
+ bool "Non-standard serial port support"
+ depends on HAS_IOMEM
+ ---help---
+ Say Y here if you have any non-standard serial boards -- boards
+ which aren't supported using the standard "dumb" serial driver.
+ This includes intelligent serial boards such as Cyclades,
+ Digiboards, etc. These are usually used for systems that need many
+ serial ports because they serve many terminals or dial-in
+ connections.
+
+ Note that the answer to this question won't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about non-standard serial boards.
+
+ Most people can say N here.
+
+config ROCKETPORT
+ tristate "Comtrol RocketPort support"
+ depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
+ help
+ This driver supports Comtrol RocketPort and RocketModem PCI boards.
+ These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or
+ modems. For information about the RocketPort/RocketModem boards
+ and this driver read <file:Documentation/serial/rocket.txt>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rocket.
+
+ If you want to compile this driver into the kernel, say Y here. If
+ you don't have a Comtrol RocketPort/RocketModem card installed, say N.
+
+config CYCLADES
+ tristate "Cyclades async mux support"
+ depends on SERIAL_NONSTANDARD && (PCI || ISA)
+ select FW_LOADER
+ ---help---
+ This driver supports Cyclades Z and Y multiserial boards.
+ You would need something like this to connect more than two modems to
+ your Linux box, for instance in order to become a dial-in server.
+
+ For information about the Cyclades-Z card, read
+ <file:Documentation/serial/README.cycladesZ>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cyclades.
+
+ If you haven't heard about it, it's safe to say N.
+
+config CYZ_INTR
+ bool "Cyclades-Z interrupt mode operation (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && CYCLADES
+ help
+ The Cyclades-Z family of multiport cards allows 2 (two) driver op
+ modes: polling and interrupt. In polling mode, the driver will check
+ the status of the Cyclades-Z ports every certain amount of time
+ (which is called polling cycle and is configurable). In interrupt
+ mode, it will use an interrupt line (IRQ) in order to check the
+ status of the Cyclades-Z ports. The default op mode is polling. If
+ unsure, say N.
+
+config MOXA_INTELLIO
+ tristate "Moxa Intellio support"
+ depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
+ select FW_LOADER
+ help
+ Say Y here if you have a Moxa Intellio multiport serial card.
+
+ To compile this driver as a module, choose M here: the
+ module will be called moxa.
+
+config MOXA_SMARTIO
+ tristate "Moxa SmartIO support v. 2.0"
+ depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA)
+ help
+ Say Y here if you have a Moxa SmartIO multiport serial card and/or
+ want to help develop a new version of this driver.
+
+ This is upgraded (1.9.1) driver from original Moxa drivers with
+ changes finally resulting in PCI probing.
+
+ This driver can also be built as a module. The module will be called
+ mxser. If you want to do that, say M here.
+
+config SYNCLINK
+ tristate "Microgate SyncLink card support"
+ depends on SERIAL_NONSTANDARD && PCI && ISA_DMA_API
+ help
+ Provides support for the SyncLink ISA and PCI multiprotocol serial
+ adapters. These adapters support asynchronous and HDLC bit
+ synchronous communication up to 10Mbps (PCI adapter).
+
+ This driver can only be built as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called synclink. If you want to do that, say M
+ here.
+
+config SYNCLINKMP
+ tristate "SyncLink Multiport support"
+ depends on SERIAL_NONSTANDARD && PCI
+ help
+ Enable support for the SyncLink Multiport (2 or 4 ports)
+ serial adapter, running asynchronous and HDLC communications up
+ to 2.048Mbps. Each ports is independently selectable for
+ RS-232, V.35, RS-449, RS-530, and X.21
+
+ This driver may be built as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called synclinkmp. If you want to do that, say M
+ here.
+
+config SYNCLINK_GT
+ tristate "SyncLink GT/AC support"
+ depends on SERIAL_NONSTANDARD && PCI
+ help
+ Support for SyncLink GT and SyncLink AC families of
+ synchronous and asynchronous serial adapters
+ manufactured by Microgate Systems, Ltd. (www.microgate.com)
+
+config NOZOMI
+ tristate "HSDPA Broadband Wireless Data Card - Globe Trotter"
+ depends on PCI && EXPERIMENTAL
+ help
+ If you have a HSDPA driver Broadband Wireless Data Card -
+ Globe Trotter PCMCIA card, say Y here.
+
+ To compile this driver as a module, choose M here, the module
+ will be called nozomi.
+
+config ISI
+ tristate "Multi-Tech multiport card support (EXPERIMENTAL)"
+ depends on SERIAL_NONSTANDARD && PCI
+ select FW_LOADER
+ help
+ This is a driver for the Multi-Tech cards which provide several
+ serial ports. The driver is experimental and can currently only be
+ built as a module. The module will be called isicom.
+ If you want to do that, choose M here.
+
+config N_HDLC
+ tristate "HDLC line discipline support"
+ depends on SERIAL_NONSTANDARD
+ help
+ Allows synchronous HDLC communications with tty device drivers that
+ support synchronous HDLC such as the Microgate SyncLink adapter.
+
+ This driver can be built as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called n_hdlc. If you want to do that, say M
+ here.
+
+config N_GSM
+ tristate "GSM MUX line discipline support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ depends on NET
+ help
+ This line discipline provides support for the GSM MUX protocol and
+ presents the mux as a set of 61 individual tty devices.
+