summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial/ioc4_serial.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/ioc4_serial.c')
-rw-r--r--drivers/tty/serial/ioc4_serial.c2953
1 files changed, 2953 insertions, 0 deletions
diff --git a/drivers/tty/serial/ioc4_serial.c b/drivers/tty/serial/ioc4_serial.c
new file mode 100644
index 000000000000..fcfe82653ac8
--- /dev/null
+++ b/drivers/tty/serial/ioc4_serial.c
@@ -0,0 +1,2953 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003-2006 Silicon Graphics, Inc. All Rights Reserved.
+ */
+
+
+/*
+ * This file contains a module version of the ioc4 serial driver. This
+ * includes all the support functions needed (support functions, etc.)
+ * and the serial driver itself.
+ */
+#include <linux/errno.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serialP.h>
+#include <linux/circ_buf.h>
+#include <linux/serial_reg.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/ioc4.h>
+#include <linux/serial_core.h>
+#include <linux/slab.h>
+
+/*
+ * interesting things about the ioc4
+ */
+
+#define IOC4_NUM_SERIAL_PORTS 4 /* max ports per card */
+#define IOC4_NUM_CARDS 8 /* max cards per partition */
+
+#define GET_SIO_IR(_n) (_n == 0) ? (IOC4_SIO_IR_S0) : \
+ (_n == 1) ? (IOC4_SIO_IR_S1) : \
+ (_n == 2) ? (IOC4_SIO_IR_S2) : \
+ (IOC4_SIO_IR_S3)
+
+#define GET_OTHER_IR(_n) (_n == 0) ? (IOC4_OTHER_IR_S0_MEMERR) : \
+ (_n == 1) ? (IOC4_OTHER_IR_S1_MEMERR) : \
+ (_n == 2) ? (IOC4_OTHER_IR_S2_MEMERR) : \
+ (IOC4_OTHER_IR_S3_MEMERR)
+
+
+/*
+ * All IOC4 registers are 32 bits wide.
+ */
+
+/*
+ * PCI Memory Space Map
+ */
+#define IOC4_PCI_ERR_ADDR_L 0x000 /* Low Error Address */
+#define IOC4_PCI_ERR_ADDR_VLD (0x1 << 0)
+#define IOC4_PCI_ERR_ADDR_MST_ID_MSK (0xf << 1)
+#define IOC4_PCI_ERR_ADDR_MST_NUM_MSK (0xe << 1)
+#define IOC4_PCI_ERR_ADDR_MST_TYP_MSK (0x1 << 1)
+#define IOC4_PCI_ERR_ADDR_MUL_ERR (0x1 << 5)
+#define IOC4_PCI_ERR_ADDR_ADDR_MSK (0x3ffffff << 6)
+
+/* Interrupt types */
+#define IOC4_SIO_INTR_TYPE 0
+#define IOC4_OTHER_INTR_TYPE 1
+#define IOC4_NUM_INTR_TYPES 2
+
+/* Bitmasks for IOC4_SIO_IR, IOC4_SIO_IEC, and IOC4_SIO_IES */
+#define IOC4_SIO_IR_S0_TX_MT 0x00000001 /* Serial port 0 TX empty */
+#define IOC4_SIO_IR_S0_RX_FULL 0x00000002 /* Port 0 RX buf full */
+#define IOC4_SIO_IR_S0_RX_HIGH 0x00000004 /* Port 0 RX hiwat */
+#define IOC4_SIO_IR_S0_RX_TIMER 0x00000008 /* Port 0 RX timeout */
+#define IOC4_SIO_IR_S0_DELTA_DCD 0x00000010 /* Port 0 delta DCD */
+#define IOC4_SIO_IR_S0_DELTA_CTS 0x00000020 /* Port 0 delta CTS */
+#define IOC4_SIO_IR_S0_INT 0x00000040 /* Port 0 pass-thru intr */
+#define IOC4_SIO_IR_S0_TX_EXPLICIT 0x00000080 /* Port 0 explicit TX thru */
+#define IOC4_SIO_IR_S1_TX_MT 0x00000100 /* Serial port 1 */
+#define IOC4_SIO_IR_S1_RX_FULL 0x00000200 /* */
+#define IOC4_SIO_IR_S1_RX_HIGH 0x00000400 /* */
+#define IOC4_SIO_IR_S1_RX_TIMER 0x00000800 /* */
+#define IOC4_SIO_IR_S1_DELTA_DCD 0x00001000 /* */
+#define IOC4_SIO_IR_S1_DELTA_CTS 0x00002000 /* */
+#define IOC4_SIO_IR_S1_INT 0x00004000 /* */
+#define IOC4_SIO_IR_S1_TX_EXPLICIT 0x00008000 /* */
+#define IOC4_SIO_IR_S2_TX_MT 0x00010000 /* Serial port 2 */
+#define IOC4_SIO_IR_S2_RX_FULL 0x00020000 /* */
+#define IOC4_SIO_IR_S2_RX_HIGH 0x00040000 /* */
+#define IOC4_SIO_IR_S2_RX_TIMER 0x00080000 /* */
+#define IOC4_SIO_IR_S2_DELTA_DCD 0x00100000 /* */
+#define IOC4_SIO_IR_S2_DELTA_CTS 0x00200000 /* */
+#define IOC4_SIO_IR_S2_INT 0x00400000 /* */
+#define IOC4_SIO_IR_S2_TX_EXPLICIT 0x00800000 /* */
+#define IOC4_SIO_IR_S3_TX_MT 0x01000000 /* Serial port 3 */
+#define IOC4_SIO_IR_S3_RX_FULL 0x02000000 /* */
+#define IOC4_SIO_IR_S3_RX_HIGH 0x04000000 /* */
+#define IOC4_SIO_IR_S3_RX_TIMER 0x08000000 /* */
+#define IOC4_SIO_IR_S3_DELTA_DCD 0x10000000 /* */
+#define IOC4_SIO_IR_S3_DELTA_CTS 0x20000000 /* */
+#define IOC4_SIO_IR_S3_INT 0x40000000 /* */
+#define IOC4_SIO_IR_S3_TX_EXPLICIT 0x80000000 /* */
+
+/* Per device interrupt masks */
+#define IOC4_SIO_IR_S0 (IOC4_SIO_IR_S0_TX_MT | \
+ IOC4_SIO_IR_S0_RX_FULL | \
+ IOC4_SIO_IR_S0_RX_HIGH | \
+ IOC4_SIO_IR_S0_RX_TIMER | \
+ IOC4_SIO_IR_S0_DELTA_DCD | \
+ IOC4_SIO_IR_S0_DELTA_CTS | \
+ IOC4_SIO_IR_S0_INT | \
+ IOC4_SIO_IR_S0_TX_EXPLICIT)
+#define IOC4_SIO_IR_S1 (IOC4_SIO_IR_S1_TX_MT | \
+ IOC4_SIO_IR_S1_RX_FULL | \
+ IOC4_SIO_IR_S1_RX_HIGH | \
+ IOC4_SIO_IR_S1_RX_TIMER | \
+ IOC4_SIO_IR_S1_DELTA_DCD | \
+ IOC4_SIO_IR_S1_DELTA_CTS | \
+ IOC4_SIO_IR_S1_INT | \
+ IOC4_SIO_IR_S1_TX_EXPLICIT)
+#define IOC4_SIO_IR_S2 (IOC4_SIO_IR_S2_TX_MT | \
+ IOC4_SIO_IR_S2_RX_FULL | \
+ IOC4_SIO_IR_S2_RX_HIGH | \
+ IOC4_SIO_IR_S2_RX_TIMER | \
+ IOC4_SIO_IR_S2_DELTA_DCD | \
+ IOC4_SIO_IR_S2_DELTA_CTS | \
+ IOC4_SIO_IR_S2_INT | \
+ IOC4_SIO_IR_S2_TX_EXPLICIT)
+#define IOC4_SIO_IR_S3 (IOC4_SIO_IR_S3_TX_MT | \
+ IOC4_SIO_IR_S3_RX_FULL | \
+ IOC4_SIO_IR_S3_RX_HIGH | \
+ IOC4_SIO_IR_S3_RX_TIMER | \
+ IOC4_SIO_IR_S3_DELTA_DCD | \
+ IOC4_SIO_IR_S3_DELTA_CTS | \
+ IOC4_SIO_IR_S3_INT | \
+ IOC4_SIO_IR_S3_TX_EXPLICIT)
+
+/* Bitmasks for IOC4_OTHER_IR, IOC4_OTHER_IEC, and IOC4_OTHER_IES */
+#define IOC4_OTHER_IR_ATA_INT 0x00000001 /* ATAPI intr pass-thru */
+#define IOC4_OTHER_IR_ATA_MEMERR 0x00000002 /* ATAPI DMA PCI error */
+#define IOC4_OTHER_IR_S0_MEMERR 0x00000004 /* Port 0 PCI error */
+#define IOC4_OTHER_IR_S1_MEMERR 0x00000008 /* Port 1 PCI error */
+#define IOC4_OTHER_IR_S2_MEMERR 0x00000010 /* Port 2 PCI error */
+#define IOC4_OTHER_IR_S3_MEMERR 0x00000020 /* Port 3 PCI error */
+#define IOC4_OTHER_IR_KBD_INT 0x00000040 /* Keyboard/mouse */
+#define IOC4_OTHER_IR_RESERVED 0x007fff80 /* Reserved */
+#define IOC4_OTHER_IR_RT_INT 0x00800000 /* INT_OUT section output */
+#define IOC4_OTHER_IR_GEN_INT 0xff000000 /* Generic pins */
+
+#define IOC4_OTHER_IR_SER_MEMERR (IOC4_OTHER_IR_S0_MEMERR | IOC4_OTHER_IR_S1_MEMERR | \
+ IOC4_OTHER_IR_S2_MEMERR | IOC4_OTHER_IR_S3_MEMERR)
+
+/* Bitmasks for IOC4_SIO_CR */
+#define IOC4_SIO_CR_CMD_PULSE_SHIFT 0 /* byte bus strobe shift */
+#define IOC4_SIO_CR_ARB_DIAG_TX0 0x00000000
+#define IOC4_SIO_CR_ARB_DIAG_RX0 0x00000010
+#define IOC4_SIO_CR_ARB_DIAG_TX1 0x00000020
+#define IOC4_SIO_CR_ARB_DIAG_RX1 0x00000030
+#define IOC4_SIO_CR_ARB_DIAG_TX2 0x00000040
+#define IOC4_SIO_CR_ARB_DIAG_RX2 0x00000050
+#define IOC4_SIO_CR_ARB_DIAG_TX3 0x00000060
+#define IOC4_SIO_CR_ARB_DIAG_RX3 0x00000070
+#define IOC4_SIO_CR_SIO_DIAG_IDLE 0x00000080 /* 0 -> active request among
+ serial ports (ro) */
+/* Defs for some of the generic I/O pins */
+#define IOC4_GPCR_UART0_MODESEL 0x10 /* Pin is output to port 0
+ mode sel */
+#define IOC4_GPCR_UART1_MODESEL 0x20 /* Pin is output to port 1
+ mode sel */
+#define IOC4_GPCR_UART2_MODESEL 0x40 /* Pin is output to port 2
+ mode sel */
+#define IOC4_GPCR_UART3_MODESEL 0x80 /* Pin is output to port 3
+ mode sel */
+
+#define IOC4_GPPR_UART0_MODESEL_PIN 4 /* GIO pin controlling
+ uart 0 mode select */
+#define IOC4_GPPR_UART1_MODESEL_PIN 5 /* GIO pin controlling
+ uart 1 mode select */
+#define IOC4_GPPR_UART2_MODESEL_PIN 6 /* GIO pin controlling
+ uart 2 mode select */
+#define IOC4_GPPR_UART3_MODESEL_PIN 7 /* GIO pin controlling
+ uart 3 mode select */
+
+/* Bitmasks for serial RX status byte */
+#define IOC4_RXSB_OVERRUN 0x01 /* Char(s) lost */
+#define IOC4_RXSB_PAR_ERR 0x02 /* Parity error */
+#define IOC4_RXSB_FRAME_ERR 0x04 /* Framing error */
+#define IOC4_RXSB_BREAK 0x08 /* Break character */
+#define IOC4_RXSB_CTS 0x10 /* State of CTS */
+#define IOC4_RXSB_DCD 0x20 /* State of DCD */
+#define IOC4_RXSB_MODEM_VALID 0x40 /* DCD, CTS, and OVERRUN are valid */
+#define IOC4_RXSB_DATA_VALID 0x80 /* Data byte, FRAME_ERR PAR_ERR
+ * & BREAK valid */
+
+/* Bitmasks for serial TX control byte */
+#define IOC4_TXCB_INT_WHEN_DONE 0x20 /* Interrupt after this byte is sent */
+#define IOC4_TXCB_INVALID 0x00 /* Byte is invalid */
+#define IOC4_TXCB_VALID 0x40 /* Byte is valid */
+#define IOC4_TXCB_MCR 0x80 /* Data<7:0> to modem control reg */
+#define IOC4_TXCB_DELAY 0xc0 /* Delay data<7:0> mSec */
+
+/* Bitmasks for IOC4_SBBR_L */
+#define IOC4_SBBR_L_SIZE 0x00000001 /* 0 == 1KB rings, 1 == 4KB rings */
+
+/* Bitmasks for IOC4_SSCR_<3:0> */
+#define IOC4_SSCR_RX_THRESHOLD 0x000001ff /* Hiwater mark */
+#define IOC4_SSCR_TX_TIMER_BUSY 0x00010000 /* TX timer in progress */
+#define IOC4_SSCR_HFC_EN 0x00020000 /* Hardware flow control enabled */
+#define IOC4_SSCR_RX_RING_DCD 0x00040000 /* Post RX record on delta-DCD */
+#define IOC4_SSCR_RX_RING_CTS 0x00080000 /* Post RX record on delta-CTS */
+#define IOC4_SSCR_DIAG 0x00200000 /* Bypass clock divider for sim */
+#define IOC4_SSCR_RX_DRAIN 0x08000000 /* Drain RX buffer to memory */
+#define IOC4_SSCR_DMA_EN 0x10000000 /* Enable ring buffer DMA */
+#define IOC4_SSCR_DMA_PAUSE 0x20000000 /* Pause DMA */
+#define IOC4_SSCR_PAUSE_STATE 0x40000000 /* Sets when PAUSE takes effect */
+#define IOC4_SSCR_RESET 0x80000000 /* Reset DMA channels */
+
+/* All producer/comsumer pointers are the same bitfield */
+#define IOC4_PROD_CONS_PTR_4K 0x00000ff8 /* For 4K buffers */
+#define IOC4_PROD_CONS_PTR_1K 0x000003f8 /* For 1K buffers */
+#define IOC4_PROD_CONS_PTR_OFF 3
+
+/* Bitmasks for IOC4_SRCIR_<3:0> */
+#define IOC4_SRCIR_ARM 0x80000000 /* Arm RX timer */
+
+/* Bitmasks for IOC4_SHADOW_<3:0> */
+#define IOC4_SHADOW_DR 0x00000001 /* Data ready */
+#define IOC4_SHADOW_OE 0x00000002 /* Overrun error */
+#define IOC4_SHADOW_PE 0x00000004 /* Parity error */
+#define IOC4_SHADOW_FE 0x00000008 /* Framing error */
+#define IOC4_SHADOW_BI 0x00000010 /* Break interrupt */
+#define IOC4_SHADOW_THRE 0x00000020 /* Xmit holding register empty */
+#define IOC4_SHADOW_TEMT 0x00000040 /* Xmit shift register empty */
+#define IOC4_SHADOW_RFCE 0x00000080 /* Char in RX fifo has an error */
+#define IOC4_SHADOW_DCTS 0x00010000 /* Delta clear to send */
+#define IOC4_SHADOW_DDCD 0x00080000 /* Delta data carrier detect */
+#define IOC4_SHADOW_CTS 0x00100000 /* Clear to send */
+#define IOC4_SHADOW_DCD 0x00800000 /* Data carrier detect */
+#define IOC4_SHADOW_DTR 0x01000000 /* Data terminal ready */
+#define IOC4_SHADOW_RTS 0x02000000 /* Request to send */
+#define IOC4_SHADOW_OUT1 0x04000000 /* 16550 OUT1 bit */
+#define IOC4_SHADOW_OUT2 0x08000000 /* 16550 OUT2 bit */
+#define IOC4_SHADOW_LOOP 0x10000000 /* Loopback enabled */
+
+/* Bitmasks for IOC4_SRTR_<3:0> */
+#define IOC4_SRTR_CNT 0x00000fff /* Reload value for RX timer */
+#define IOC4_SRTR_CNT_VAL 0x0fff0000 /* Current value of RX timer */
+#define IOC4_SRTR_CNT_VAL_SHIFT 16
+#define IOC4_SRTR_HZ 16000 /* SRTR clock frequency */
+
+/* Serial port register map used for DMA and PIO serial I/O */
+struct ioc4_serialregs {
+ uint32_t sscr;
+ uint32_t stpir;
+ uint32_t stcir;
+ uint32_t srpir;
+ uint32_t srcir;
+ uint32_t srtr;
+ uint32_t shadow;
+};
+
+/* IOC4 UART register map */
+struct ioc4_uartregs {
+ char i4u_lcr;
+ union {
+ char iir; /* read only */
+ char fcr; /* write only */
+ } u3;
+ union {
+ char ier; /* DLAB == 0 */
+ char dlm; /* DLAB == 1 */
+ } u2;
+ union {
+ char rbr; /* read only, DLAB == 0 */
+ char thr; /* write only, DLAB == 0 */
+ char dll; /* DLAB == 1 */
+ } u1;
+ char i4u_scr;
+ char i4u_msr;
+ char i4u_lsr;
+ char i4u_mcr;
+};
+
+/* short names */
+#define i4u_dll u1.dll
+#define i4u_ier u2.ier
+#define i4u_dlm u2.dlm
+#define i4u_fcr u3.fcr
+
+/* Serial port registers used for DMA serial I/O */
+struct ioc4_serial {
+ uint32_t sbbr01_l;
+ uint32_t sbbr01_h;
+ uint32_t sbbr23_l;
+ uint32_t sbbr23_h;
+
+ struct ioc4_serialregs port_0;
+ struct ioc4_serialregs port_1;
+ struct ioc4_serialregs port_2;
+ struct ioc4_serialregs port_3;
+ struct ioc4_uartregs uart_0;
+ struct ioc4_uartregs uart_1;
+ struct ioc4_uartregs uart_2;
+ struct ioc4_uartregs uart_3;
+} ioc4_serial;
+
+/* UART clock speed */
+#define IOC4_SER_XIN_CLK_66 66666667
+#define IOC4_SER_XIN_CLK_33 33333333
+
+#define IOC4_W_IES 0
+#define IOC4_W_IEC 1
+
+typedef void ioc4_intr_func_f(void *, uint32_t);
+typedef ioc4_intr_func_f *ioc4_intr_func_t;
+
+static unsigned int Num_of_ioc4_cards;
+
+/* defining this will get you LOTS of great debug info */
+//#define DEBUG_INTERRUPTS
+#define DPRINT_CONFIG(_x...) ;
+//#define DPRINT_CONFIG(_x...) printk _x
+
+/* number of characters left in xmit buffer before we ask for more */
+#define WAKEUP_CHARS 256
+
+/* number of characters we want to transmit to the lower level at a time */
+#define IOC4_MAX_CHARS 256
+#define IOC4_FIFO_CHARS 255
+
+/* Device name we're using */
+#define DEVICE_NAME_RS232 "ttyIOC"
+#define DEVICE_NAME_RS422 "ttyAIOC"
+#define DEVICE_MAJOR 204
+#define DEVICE_MINOR_RS232 50
+#define DEVICE_MINOR_RS422 84
+
+
+/* register offsets */
+#define IOC4_SERIAL_OFFSET 0x300
+
+/* flags for next_char_state */
+#define NCS_BREAK 0x1
+#define NCS_PARITY 0x2
+#define NCS_FRAMING 0x4
+#define NCS_OVERRUN 0x8
+
+/* cause we need SOME parameters ... */
+#define MIN_BAUD_SUPPORTED 1200
+#define MAX_BAUD_SUPPORTED 115200
+
+/* protocol types supported */
+#define PROTO_RS232 3
+#define PROTO_RS422 7
+
+/* Notification types */
+#define N_DATA_READY 0x01
+#define N_OUTPUT_LOWAT 0x02
+#define N_BREAK 0x04
+#define N_PARITY_ERROR 0x08
+#define N_FRAMING_ERROR 0x10
+#define N_OVERRUN_ERROR 0x20
+#define N_DDCD 0x40
+#define N_DCTS 0x80
+
+#define N_ALL_INPUT (N_DATA_READY | N_BREAK | \
+ N_PARITY_ERROR | N_FRAMING_ERROR | \
+ N_OVERRUN_ERROR | N_DDCD | N_DCTS)
+
+#define N_ALL_OUTPUT N_OUTPUT_LOWAT
+
+#define N_ALL_ERRORS (N_PARITY_ERROR | N_FRAMING_ERROR | N_OVERRUN_ERROR)
+
+#define N_ALL (N_DATA_READY | N_OUTPUT_LOWAT | N_BREAK | \
+ N_PARITY_ERROR | N_FRAMING_ERROR | \
+ N_OVERRUN_ERROR | N_DDCD | N_DCTS)
+
+#define SER_DIVISOR(_x, clk) (((clk) + (_x) * 8) / ((_x) * 16))
+#define DIVISOR_TO_BAUD(div, clk) ((clk) / 16 / (div))
+
+/* Some masks */
+#define LCR_MASK_BITS_CHAR (UART_LCR_WLEN5 | UART_LCR_WLEN6 \
+ | UART_LCR_WLEN7 | UART_LCR_WLEN8)
+#define LCR_MASK_STOP_BITS (UART_LCR_STOP)
+
+#define PENDING(_p) (readl(&(_p)->ip_mem->sio_ir.raw) & _p->ip_ienb)
+#define READ_SIO_IR(_p) readl(&(_p)->ip_mem->sio_ir.raw)
+
+/* Default to 4k buffers */
+#ifdef IOC4_1K_BUFFERS
+#define RING_BUF_SIZE 1024
+#define IOC4_BUF_SIZE_BIT 0
+#define PROD_CONS_MASK IOC4_PROD_CONS_PTR_1K
+#else
+#define RING_BUF_SIZE 4096
+#define IOC4_BUF_SIZE_BIT IOC4_SBBR_L_SIZE
+#define PROD_CONS_MASK IOC4_PROD_CONS_PTR_4K
+#endif
+
+#define TOTAL_RING_BUF_SIZE (RING_BUF_SIZE * 4)
+
+/*
+ * This is the entry saved by the driver - one per card
+ */
+
+#define UART_PORT_MIN 0
+#define UART_PORT_RS232 UART_PORT_MIN
+#define UART_PORT_RS422 1
+#define UART_PORT_COUNT 2 /* one for each mode */
+
+struct ioc4_control {
+ int ic_irq;
+ struct {
+ /* uart ports are allocated here - 1 for rs232, 1 for rs422 */
+ struct uart_port icp_uart_port[UART_PORT_COUNT];
+ /* Handy reference material */
+ struct ioc4_port *icp_port;
+ } ic_port[IOC4_NUM_SERIAL_PORTS];
+ struct ioc4_soft *ic_soft;
+};
+
+/*
+ * per-IOC4 data structure
+ */
+#define MAX_IOC4_INTR_ENTS (8 * sizeof(uint32_t))
+struct ioc4_soft {
+ struct ioc4_misc_regs __iomem *is_ioc4_misc_addr;
+ struct ioc4_serial __iomem *is_ioc4_serial_addr;
+
+ /* Each interrupt type has an entry in the array */
+ struct ioc4_intr_type {
+
+ /*
+ * Each in-use entry in this array contains at least
+ * one nonzero bit in sd_bits; no two entries in this
+ * array have overlapping sd_bits values.
+ */
+ struct ioc4_intr_info {
+ uint32_t sd_bits;
+ ioc4_intr_func_f *sd_intr;
+ void *sd_info;
+ } is_intr_info[MAX_IOC4_INTR_ENTS];
+
+ /* Number of entries active in the above array */
+ atomic_t is_num_intrs;
+ } is_intr_type[IOC4_NUM_INTR_TYPES];
+
+ /* is_ir_lock must be held while
+ * modifying sio_ie values, so
+ * we can be sure that sio_ie is
+ * not changing when we read it
+ * along with sio_ir.
+ */
+ spinlock_t is_ir_lock; /* SIO_IE[SC] mod lock */
+};
+
+/* Local port info for each IOC4 serial ports */
+struct ioc4_port {
+ struct uart_port *ip_port; /* current active port ptr */
+ /* Ptrs for all ports */
+ struct uart_port *ip_all_ports[UART_PORT_COUNT];
+ /* Back ptrs for this port */
+ struct ioc4_control *ip_control;
+ struct pci_dev *ip_pdev;
+ struct ioc4_soft *ip_ioc4_soft;
+
+ /* pci mem addresses */
+ struct ioc4_misc_regs __iomem *ip_mem;
+ struct ioc4_serial __iomem *ip_serial;
+ struct ioc4_serialregs __iomem *ip_serial_regs;
+ struct ioc4_uartregs __iomem *ip_uart_regs;
+
+ /* Ring buffer page for this port */
+ dma_addr_t ip_dma_ringbuf;
+ /* vaddr of ring buffer */
+ struct ring_buffer *ip_cpu_ringbuf;
+
+ /* Rings for this port */
+ struct ring *ip_inring;
+ struct ring *ip_outring;
+
+ /* Hook to port specific values */
+ struct hooks *ip_hooks;
+
+ spinlock_t ip_lock;
+
+ /* Various rx/tx parameters */
+ int ip_baud;
+ int ip_tx_lowat;
+ int ip_rx_timeout;
+
+ /* Copy of notification bits */
+ int ip_notify;
+
+ /* Shadow copies of various registers so we don't need to PIO
+ * read them constantly
+ */
+ uint32_t ip_ienb; /* Enabled interrupts */
+ uint32_t ip_sscr;
+ uint32_t ip_tx_prod;
+ uint32_t ip_rx_cons;
+ int ip_pci_bus_speed;
+ unsigned char ip_flags;
+};
+
+/* tx low water mark. We need to notify the driver whenever tx is getting
+ * close to empty so it can refill the tx buffer and keep things going.
+ * Let's assume that if we interrupt 1 ms before the tx goes idle, we'll
+ * have no trouble getting in more chars in time (I certainly hope so).
+ */
+#define TX_LOWAT_LATENCY 1000
+#define TX_LOWAT_HZ (1000000 / TX_LOWAT_LATENCY)
+#define TX_LOWAT_CHARS(baud) (baud / 10 / TX_LOWAT_HZ)
+
+/* Flags per port */
+#define INPUT_HIGH 0x01
+#define DCD_ON 0x02
+#define LOWAT_WRITTEN 0x04
+#define READ_ABORTED 0x08
+#define PORT_ACTIVE 0x10
+#define PORT_INACTIVE 0 /* This is the value when "off" */
+
+
+/* Since each port has different register offsets and bitmasks
+ * for everything, we'll store those that we need in tables so we
+ * don't have to be constantly checking the port we are dealing with.
+ */
+struct hooks {
+ uint32_t intr_delta_dcd;
+ uint32_t intr_delta_cts;
+ uint32_t intr_tx_mt;
+ uint32_t intr_rx_timer;
+ uint32_t intr_rx_high;
+ uint32_t intr_tx_explicit;
+ uint32_t intr_dma_error;
+ uint32_t intr_clear;
+ uint32_t intr_all;
+ int rs422_select_pin;
+};
+
+static struct hooks hooks_array[IOC4_NUM_SERIAL_PORTS] = {
+ /* Values for port 0 */
+ {
+ IOC4_SIO_IR_S0_DELTA_DCD, IOC4_SIO_IR_S0_DELTA_CTS,
+ IOC4_SIO_IR_S0_TX_MT, IOC4_SIO_IR_S0_RX_TIMER,
+ IOC4_SIO_IR_S0_RX_HIGH, IOC4_SIO_IR_S0_TX_EXPLICIT,
+ IOC4_OTHER_IR_S0_MEMERR,
+ (IOC4_SIO_IR_S0_TX_MT | IOC4_SIO_IR_S0_RX_FULL |
+ IOC4_SIO_IR_S0_RX_HIGH | IOC4_SIO_IR_S0_RX_TIMER |
+ IOC4_SIO_IR_S0_DELTA_DCD | IOC4_SIO_IR_S0_DELTA_CTS |
+ IOC4_SIO_IR_S0_INT | IOC4_SIO_IR_S0_TX_EXPLICIT),
+ IOC4_SIO_IR_S0, IOC4_GPPR_UART0_MODESEL_PIN,
+ },
+
+ /* Values for port 1 */
+ {
+ IOC4_SIO_IR_S1_DELTA_DCD, IOC4_SIO_IR_S1_DELTA_CTS,
+ IOC4_SIO_IR_S1_TX_MT, IOC4_SIO_IR_S1_RX_TIMER,
+ IOC4_SIO_IR_S1_RX_HIGH, IOC4_SIO_IR_S1_TX_EXPLICIT,
+ IOC4_OTHER_IR_S1_MEMERR,
+ (IOC4_SIO_IR_S1_TX_MT | IOC4_SIO_IR_S1_RX_FULL |
+ IOC4_SIO_IR_S1_RX_HIGH | IOC4_SIO_IR_S1_RX_TIMER |
+ IOC4_SIO_IR_S1_DELTA_DCD | IOC4_SIO_IR_S1_DELTA_CTS |
+ IOC4_SIO_IR_S1_INT | IOC4_SIO_IR_S1_TX_EXPLICIT),
+ IOC4_SIO_IR_S1, IOC4_GPPR_UART1_MODESEL_PIN,
+ },
+
+ /* Values for port 2 */
+ {
+ IOC4_SIO_IR_S2_DELTA_DCD, IOC4_SIO_IR_S2_DELTA_CTS,
+ IOC4_SIO_IR_S2_TX_MT, IOC4_SIO_IR_S2_RX_TIMER,
+ IOC4_SIO_IR_S2_RX_HIGH, IOC4_SIO_IR_S2_TX_EXPLICIT,
+ IOC4_OTHER_IR_S2_MEMERR,
+ (IOC4_SIO_IR_S2_TX_MT | IOC4_SIO_IR_S2_RX_FULL |
+ IOC4_SIO_IR_S2_RX_HIGH | IOC4_SIO_IR_S2_RX_TIMER |
+ IOC4_SIO_IR_S2_DELTA_DCD | IOC4_SIO_IR_S2_DELTA_CTS |
+ IOC4_SIO_IR_S2_INT | IOC4_SIO_IR_S2_TX_EXPLICIT),
+ IOC4_SIO_IR_S2, IOC4_GPPR_UART2_MODESEL_PIN,
+ },
+
+ /* Values for port 3 */
+ {
+ IOC4_SIO_IR_S3_DELTA_DCD, IOC4_SIO_IR_S3_DELTA_CTS,
+ IOC4_SIO_IR_S3_TX_MT, IOC4_SIO_IR_S3_RX_TIMER,
+ IOC4_SIO_IR_S3_RX_HIGH, IOC4_SIO_IR_S3_TX_EXPLICIT,
+ IOC4_OTHER_IR_S3_MEMERR,
+ (IOC4_SIO_IR_S3_TX_MT | IOC4_SIO_IR_S3_RX_FULL |
+ IOC4_SIO_IR_S3_RX_HIGH | IOC4_SIO_IR_S3_RX_TIMER |
+ IOC4_SIO_IR_S3_DELTA_DCD | IOC4_SIO_IR_S3_DELTA_CTS |
+ IOC4_SIO_IR_S3_INT | IOC4_SIO_IR_S3_TX_EXPLICIT),
+ IOC4_SIO_IR_S3, IOC4_GPPR_UART3_MODESEL_PIN,
+ }
+};
+
+/* A ring buffer entry */
+struct ring_entry {
+ union {
+ struct {
+ uint32_t alldata;
+ uint32_t allsc;
+ } all;
+ struct {
+ char data[4]; /* data bytes */
+ char sc[4]; /* status/control */
+ } s;
+ } u;
+};
+
+/* Test the valid bits in any of the 4 sc chars using "allsc" member */
+#define RING_ANY_VALID \
+ ((uint32_t)(IOC4_RXSB_MODEM_VALID | IOC4_RXSB_DATA_VALID) * 0x01010101)
+
+#define ring_sc u.s.sc
+#define ring_data u.s.data
+#define ring_allsc u.all.allsc
+
+/* Number of entries per ring buffer. */
+#define ENTRIES_PER_RING (RING_BUF_SIZE / (int) sizeof(struct ring_entry))
+
+/* An individual ring */
+struct ring {
+ struct ring_entry entries[ENTRIES_PER_RING];
+};
+
+/* The whole enchilada */
+struct ring_buffer {
+ struct ring TX_0_OR_2;
+ struct ring RX_0_OR_2;
+ struct ring TX_1_OR_3;
+ struct ring RX_1_OR_3;
+};
+
+/* Get a ring from a port struct */
+#define RING(_p, _wh) &(((struct ring_buffer *)((_p)->ip_cpu_ringbuf))->_wh)
+
+/* Infinite loop detection.
+ */
+#define MAXITER 10000000
+
+/* Prototypes */
+static void receive_chars(struct uart_port *);
+static void handle_intr(void *arg, uint32_t sio_ir);
+
+/*
+ * port_is_active - determines if this port is currently active
+ * @port: ptr to soft struct for this port
+ * @uart_port: uart port to test for
+ */
+static inline int port_is_active(struct ioc4_port *port,
+ struct uart_port *uart_port)
+{
+ if (port) {
+ if ((port->ip_flags & PORT_ACTIVE)
+ && (port->ip_port == uart_port))
+ return 1;
+ }
+ return 0;
+}
+
+
+/**
+ * write_ireg - write the interrupt regs
+ * @ioc4_soft: ptr to soft struct for this port
+ * @val: value to write
+ * @which: which register
+ * @type: which ireg set
+ */
+static inline void
+write_ireg(struct ioc4_soft *ioc4_soft, uint32_t val, int which, int type)
+{
+ struct ioc4_misc_regs __iomem *mem = ioc4_soft->is_ioc4_misc_addr;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioc4_soft->is_ir_lock, flags);
+
+ switch (type) {
+ case IOC4_SIO_INTR_TYPE:
+ switch (which) {
+ case IOC4_W_IES:
+ writel(val, &mem->sio_ies.raw);
+ break;
+
+ case IOC4_W_IEC:
+ writel(val, &mem->sio_iec.raw);
+ break;
+ }
+ break;
+
+ case IOC4_OTHER_INTR_TYPE:
+ switch (which) {
+ case IOC4_W_IES:
+ writel(val, &mem->other_ies.raw);
+ break;
+
+ case IOC4_W_IEC:
+ writel(val, &mem->other_iec.raw);
+ break;
+ }
+ break;
+
+ default:
+ break;
+ }
+ spin_unlock_irqrestore(&ioc4_soft->is_ir_lock, flags);
+}
+
+/**
+ * set_baud - Baud rate setting code
+ * @port: port to set
+ * @baud: baud rate to use
+ */
+static int set_baud(struct ioc4_port *port, int baud)
+{
+ int actual_baud;
+ int diff;
+ int lcr;
+ unsigned short divisor;
+ struct ioc4_uartregs __iomem *uart;
+
+ divisor = SER_DIVISOR(baud, port->ip_pci_bus_speed);
+ if (!divisor)
+ return 1;
+ actual_baud = DIVISOR_TO_BAUD(divisor, port->ip_pci_bus_speed);
+
+ diff = actual_baud - baud;
+ if (diff < 0)
+ diff = -diff;
+
+ /* If we're within 1%, we've found a match */
+ if (diff * 100 > actual_baud)
+ return 1;
+
+ uart = port->ip_uart_regs;
+ lcr = readb(&uart->i4u_lcr);
+ writeb(lcr | UART_LCR_DLAB, &uart->i4u_lcr);
+ writeb((unsigned char)divisor, &uart->i4u_dll);
+ writeb((unsigned char)(divisor >> 8), &uart->i4u_dlm);
+ writeb(lcr, &uart->i4u_lcr);
+ return 0;
+}
+
+
+/**
+ * get_ioc4_port - given a uart port, return the control structure
+ * @port: uart port
+ * @set: set this port as current
+ */
+static struct ioc4_port *get_ioc4_port(struct uart_port *the_port, int set)
+{
+ struct ioc4_driver_data *idd = dev_get_drvdata(the_port->dev);
+ struct ioc4_control *control = idd->idd_serial_data;
+ struct ioc4_port *port;
+ int port_num, port_type;
+
+ if (control) {
+ for ( port_num = 0; port_num < IOC4_NUM_SERIAL_PORTS;
+ port_num++ ) {
+ port = control->ic_port[port_num].icp_port;
+ if (!port)
+ continue;
+ for (port_type = UART_PORT_MIN;
+ port_type < UART_PORT_COUNT;
+ port_type++) {
+ if (the_port == port->ip_all_ports
+ [port_type]) {
+ /* set local copy */
+ if (set) {
+ port->ip_port = the_port;
+ }
+ return port;
+ }
+ }
+ }
+ }
+ return NULL;
+}
+
+/* The IOC4 hardware provides no atomic way to determine if interrupts
+ * are pending since two reads are required to do so. The handler must
+ * read the SIO_IR and the SIO_IES, and take the logical and of the
+ * two. When this value is zero, all interrupts have been serviced and
+ * the handler may return.
+ *
+ * This has the unfortunate "hole" that, if some other CPU or
+ * some other thread or some higher level interrupt manages to
+ * modify SIO_IE between our reads of SIO_IR and SIO_IE, we may
+ * think we have observed SIO_IR&SIO_IE==0 when in fact this
+ * condition never really occurred.
+ *
+ * To solve this, we use a simple spinlock that must be held
+ * whenever modifying SIO_IE; holding this lock while observing
+ * both SIO_IR and SIO_IE guarantees that we do not falsely
+ * conclude that no enabled interrupts are pending.
+ */
+
+static inline uint32_t
+pending_intrs(struct ioc4_soft *soft, int type)
+{
+ struct ioc4_misc_regs __iomem *mem = soft->is_ioc4_misc_addr;
+ unsigned long flag;
+ uint32_t intrs = 0;
+
+ BUG_ON(!((type == IOC4_SIO_INTR_TYPE)
+ || (type == IOC4_OTHER_INTR_TYPE)));
+
+ spin_lock_irqsave(&soft->is_ir_lock, flag);
+
+ switch (type) {
+ case IOC4_SIO_INTR_TYPE:
+ intrs = readl(&mem->sio_ir.raw) & readl(&mem->sio_ies.raw);
+ break;
+
+ case IOC4_OTHER_INTR_TYPE:
+ intrs = readl(&mem->other_ir.raw) & readl(&mem->other_ies.raw);
+
+ /* Don't process any ATA interrupte */
+ intrs &= ~(IOC4_OTHER_IR_ATA_INT | IOC4_OTHER_IR_ATA_MEMERR);
+ break;
+
+ default:
+ break;
+ }
+ spin_unlock_irqrestore(&soft->is_ir_lock, flag);
+ return intrs;
+}
+
+/**
+ * port_init - Initialize the sio and ioc4 hardware for a given port
+ * called per port from attach...
+ * @port: port to initialize
+ */
+static int inline port_init(struct ioc4_port *port)
+{
+ uint32_t sio_cr;
+ struct hooks *hooks = port->ip_hooks;
+ struct ioc4_uartregs __iomem *uart;
+
+ /* Idle the IOC4 serial interface */
+ writel(IOC4_SSCR_RESET, &port->ip_serial_regs->sscr);
+
+ /* Wait until any pending bus activity for this port has ceased */
+ do
+ sio_cr = readl(&port->ip_mem->sio_cr.raw);
+ while (!(sio_cr & IOC4_SIO_CR_SIO_DIAG_IDLE));
+
+ /* Finish reset sequence */
+ writel(0, &port->ip_serial_regs->sscr);
+
+ /* Once RESET is done, reload cached tx_prod and rx_cons values
+ * and set rings to empty by making prod == cons
+ */
+ port->ip_tx_prod = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK;
+ writel(port->ip_tx_prod, &port->ip_serial_regs->stpir);
+ port->ip_rx_cons = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK;
+ writel(port->ip_rx_cons | IOC4_SRCIR_ARM, &port->ip_serial_regs->srcir);
+
+ /* Disable interrupts for this 16550 */
+ uart = port->ip_uart_regs;
+ writeb(0, &uart->i4u_lcr);
+ writeb(0, &uart->i4u_ier);
+
+ /* Set the default baud */
+ set_baud(port, port->ip_baud);
+
+ /* Set line control to 8 bits no parity */
+ writeb(UART_LCR_WLEN8 | 0, &uart->i4u_lcr);
+ /* UART_LCR_STOP == 1 stop */
+
+ /* Enable the FIFOs */
+ writeb(UART_FCR_ENABLE_FIFO, &uart->i4u_fcr);
+ /* then reset 16550 FIFOs */
+ writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
+ &uart->i4u_fcr);
+
+ /* Clear modem control register */
+ writeb(0, &uart->i4u_mcr);
+
+ /* Clear deltas in modem status register */
+ readb(&uart->i4u_msr);
+
+ /* Only do this once per port pair */
+ if (port->ip_hooks == &hooks_array[0]
+ || port->ip_hooks == &hooks_array[2]) {
+ unsigned long ring_pci_addr;
+ uint32_t __iomem *sbbr_l;
+ uint32_t __iomem *sbbr_h;
+
+ if (port->ip_hooks == &hooks_array[0]) {
+ sbbr_l = &port->ip_serial->sbbr01_l;
+ sbbr_h = &port->ip_serial->sbbr01_h;
+ } else {
+ sbbr_l = &port->ip_serial->sbbr23_l;
+ sbbr_h = &port->ip_serial->sbbr23_h;
+ }
+
+ ring_pci_addr = (unsigned long __iomem)port->ip_dma_ringbuf;
+ DPRINT_CONFIG(("%s: ring_pci_addr 0x%lx\n",
+ __func__, ring_pci_addr));
+
+ writel((unsigned int)((uint64_t)ring_pci_addr >> 32), sbbr_h);
+ writel((unsigned int)ring_pci_addr | IOC4_BUF_SIZE_BIT, sbbr_l);
+ }
+
+ /* Set the receive timeout value to 10 msec */
+ writel(IOC4_SRTR_HZ / 100, &port->ip_serial_regs->srtr);
+
+ /* Set rx threshold, enable DMA */
+ /* Set high water mark at 3/4 of full ring */
+ port->ip_sscr = (ENTRIES_PER_RING * 3 / 4);
+ writel(port->ip_sscr, &port->ip_serial_regs->sscr);
+
+ /* Disable and clear all serial related interrupt bits */
+ write_ireg(port->ip_ioc4_soft, hooks->intr_clear,
+ IOC4_W_IEC, IOC4_SIO_INTR_TYPE);
+ port->ip_ienb &= ~hooks->intr_clear;
+ writel(hooks->intr_clear, &port->ip_mem->sio_ir.raw);
+ return 0;
+}
+
+/**
+ * handle_dma_error_intr - service any pending DMA error interrupts for the
+ * given port - 2nd level called via sd_intr
+ * @arg: handler arg
+ * @other_ir: ioc4regs
+ */
+static void handle_dma_error_intr(void *arg, uint32_t other_ir)
+{
+ struct ioc4_port *port = (struct ioc4_port *)arg;
+ struct hooks *hooks = port->ip_hooks;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->ip_lock, flags);
+
+ /* ACK the interrupt */
+ writel(hooks->intr_dma_error, &port->ip_mem->other_ir.raw);
+
+ if (readl(&port->ip_mem->pci_err_addr_l.raw) & IOC4_PCI_ERR_ADDR_VLD) {
+ printk(KERN_ERR
+ "PCI error address is 0x%llx, "
+ "master is serial port %c %s\n",
+ (((uint64_t)readl(&port->ip_mem->pci_err_addr_h)
+ << 32)
+ | readl(&port->ip_mem->pci_err_addr_l.raw))
+ & IOC4_PCI_ERR_ADDR_ADDR_MSK, '1' +
+ ((char)(readl(&port->ip_mem->pci_err_addr_l.raw) &
+ IOC4_PCI_ERR_ADDR_MST_NUM_MSK) >> 1),
+ (readl(&port->ip_mem->pci_err_addr_l.raw)
+ & IOC4_PCI_ERR_ADDR_MST_TYP_MSK)
+ ? "RX" : "TX");
+
+ if (readl(&port->ip_mem->pci_err_addr_l.raw)
+ & IOC4_PCI_ERR_ADDR_MUL_ERR) {
+ printk(KERN_ERR
+ "Multiple errors occurred\n");
+ }
+ }
+ spin_unlock_irqrestore(&port->ip_lock, flags);
+
+ /* Re-enable DMA error interrupts */
+ write_ireg(port->ip_ioc4_soft, hooks->intr_dma_error, IOC4_W_IES,
+ IOC4_OTHER_INTR_TYPE);
+}
+
+/**
+ * intr_connect - interrupt connect function
+ * @soft: soft struct for this card
+ * @type: interrupt type
+ * @intrbits: bit pattern to set
+ * @intr: handler function
+ * @info: handler arg
+ */
+static void
+intr_connect(struct ioc4_soft *soft, int type,
+ uint32_t intrbits, ioc4_intr_func_f * intr, void *info)
+{
+ int i;
+ struct ioc4_intr_info *intr_ptr;
+
+ BUG_ON(!((type == IOC4_SIO_INTR_TYPE)
+ || (type == IOC4_OTHER_INTR_TYPE)));
+
+ i = atomic_inc(&soft-> is_intr_type[type].is_num_intrs) - 1;
+ BUG_ON(!(i < MAX_IOC4_INTR_ENTS || (printk("i %d\n", i), 0)));
+
+ /* Save off the lower level interrupt handler */
+ intr_ptr = &soft->is_intr_type[type].is_intr_info[i];
+ intr_ptr->sd_bits = intrbits;
+ intr_ptr->sd_intr = intr;
+ intr_ptr->sd_info = info;
+}
+
+/**
+ * ioc4_intr - Top level IOC4 interrupt handler.
+ * @irq: irq value
+ * @arg: handler arg
+ */
+
+static irqreturn_t ioc4_intr(int irq, void *arg)
+{
+ struct ioc4_soft *soft;
+ uint32_t this_ir, this_mir;
+ int xx, num_intrs = 0;
+ int intr_type;
+ int handled = 0;
+ struct ioc4_intr_info *intr_info;
+
+ soft = arg;
+ for (intr_type = 0; intr_type < IOC4_NUM_INTR_TYPES; intr_type++) {
+ num_intrs = (int)atomic_read(
+ &soft->is_intr_type[intr_type].is_num_intrs);
+
+ this_mir = this_ir = pending_intrs(soft, intr_type);
+
+ /* Farm out the interrupt to the various drivers depending on
+ * which interrupt bits are set.
+ */
+ for (xx = 0; xx < num_intrs; xx++) {
+ intr_info = &soft->is_intr_type[intr_type].is_intr_info[xx];
+ if ((this_mir = this_ir & intr_info->sd_bits)) {
+ /* Disable owned interrupts, call handler */
+ handled++;
+ write_ireg(soft, intr_info->sd_bits, IOC4_W_IEC,
+ intr_type);
+ intr_info->sd_intr(intr_info->sd_info, this_mir);
+ this_ir &= ~this_mir;
+ }
+ }
+ }
+#ifdef DEBUG_INTERRUPTS
+ {
+ struct ioc4_misc_regs __iomem *mem = soft->is_ioc4_misc_addr;
+ unsigned long flag;
+
+ spin_lock_irqsave(&soft->is_ir_lock, flag);
+ printk ("%s : %d : mem 0x%p sio_ir 0x%x sio_ies 0x%x "
+ "other_ir 0x%x other_ies 0x%x mask 0x%x\n",
+ __func__, __LINE__,
+ (void *)mem, readl(&mem->sio_ir.raw),
+ readl(&mem->sio_ies.raw),
+ readl(&mem->other_ir.raw),
+ readl(&mem->other_ies.raw),
+ IOC4_OTHER_IR_ATA_INT | IOC4_OTHER_IR_ATA_MEMERR);
+ spin_unlock_irqrestore(&soft->is_ir_lock, flag);
+ }
+#endif
+ return handled ? IRQ_HANDLED : IRQ_NONE;
+}
+
+/**
+ * ioc4_attach_local - Device initialization.
+ * Called at *_attach() time for each
+ * IOC4 with serial ports in the system.
+ * @idd: Master module data for this IOC4
+ */
+static int inline ioc4_attach_local(struct ioc4_driver_data *idd)
+{
+ struct ioc4_port *port;
+ struct ioc4_port *ports[IOC4_NUM_SERIAL_PORTS];
+ int port_number;
+ uint16_t ioc4_revid_min = 62;
+ uint16_t ioc4_revid;
+ struct pci_dev *pdev = idd->idd_pdev;
+ struct ioc4_control* control = idd->idd_serial_data;
+ struct ioc4_soft *soft = control->ic_soft;
+ void __iomem *ioc4_misc = idd->idd_misc_regs;
+ void __iomem *ioc4_serial = soft->is_ioc4_serial_addr;
+
+ /* IOC4 firmware must be at least rev 62 */
+ pci_read_config_word(pdev, PCI_COMMAND_SPECIAL, &ioc4_revid);
+
+ printk(KERN_INFO "IOC4 firmware revision %d\n", ioc4_revid);
+ if (ioc4_revid < ioc4_revid_min) {
+ printk(KERN_WARNING
+ "IOC4 serial not supported on firmware rev %d, "
+ "please upgrade to rev %d or higher\n",
+ ioc4_revid, ioc4_revid_min);
+ return -EPERM;
+ }
+ BUG_ON(ioc4_misc == NULL);
+ BUG_ON(ioc4_serial == NULL);
+
+ /* Create port structures for each port */
+ for (port_number = 0; port_number < IOC4_NUM_SERIAL_PORTS;
+ port_number++) {
+ port = kzalloc(sizeof(struct ioc4_port), GFP_KERNEL);
+ if (!port) {
+ printk(KERN_WARNING
+ "IOC4 serial memory not available for port\n");
+ return -ENOMEM;
+ }
+ spin_lock_init(&port->ip_lock);
+
+ /* we need to remember the previous ones, to point back to
+ * them farther down - setting up the ring buffers.
+ */
+ ports[port_number] = port;
+
+ /* Allocate buffers and jumpstart the hardware. */
+ control->ic_port[port_number].icp_port = port;
+ port->ip_ioc4_soft = soft;
+ port->ip_pdev = pdev;
+ port->ip_ienb = 0;
+ /* Use baud rate calculations based on detected PCI
+ * bus speed. Simply test whether the PCI clock is
+ * running closer to 66MHz or 33MHz.
+ */
+ if (idd->count_period/IOC4_EXTINT_COUNT_DIVISOR < 20) {
+ port->ip_pci_bus_speed = IOC4_SER_XIN_CLK_66;
+ } else {
+ port->ip_pci_bus_speed = IOC4_SER_XIN_CLK_33;
+ }
+ port->ip_baud = 9600;
+ port->ip_control = control;
+ port->ip_mem = ioc4_misc;
+ port->ip_serial = ioc4_serial;
+
+ /* point to the right hook */
+ port->ip_hooks = &hooks_array[port_number];
+
+ /* Get direct hooks to the serial regs and uart regs
+ * for this port
+ */
+ switch (port_number) {
+ case 0:
+ port->ip_serial_regs = &(port->ip_serial->port_0);
+ port->ip_uart_regs = &(port->ip_serial->uart_0);
+ break;
+ case 1:
+ port->ip_serial_regs = &(port->ip_serial->port_1);
+ port->ip_uart_regs = &(port->ip_serial->uart_1);
+ break;
+ case 2:
+ port->ip_serial_regs = &(port->ip_serial->port_2);
+ port->ip_uart_regs = &(port->ip_serial->uart_2);
+ break;
+ default:
+ case 3:
+ port->ip_serial_regs = &(port->ip_serial->port_3);
+ port->ip_uart_regs = &(port->ip_serial->uart_3);
+ break;
+ }
+
+ /* ring buffers are 1 to a pair of ports */
+ if (port_number && (port_number & 1)) {
+ /* odd use the evens buffer */
+ port->ip_dma_ringbuf =
+ ports[port_number - 1]->ip_dma_ringbuf;
+ port->ip_cpu_ringbuf =
+ ports[port_number - 1]->ip_cpu_ringbuf;
+ port->ip_inring = RING(port, RX_1_OR_3);
+ port->ip_outring = RING(port, TX_1_OR_3);
+
+ } else {
+ if (port->ip_dma_ringbuf == 0) {
+ port->ip_cpu_ringbuf = pci_alloc_consistent
+ (pdev, TOTAL_RING_BUF_SIZE,
+ &port->ip_dma_ringbuf);
+
+ }
+ BUG_ON(!((((int64_t)port->ip_dma_ringbuf) &
+ (TOTAL_RING_BUF_SIZE - 1)) == 0));
+ DPRINT_CONFIG(("%s : ip_cpu_ringbuf 0x%p "
+ "ip_dma_ringbuf 0x%p\n",
+ __func__,
+ (void *)port->ip_cpu_ringbuf,
+ (void *)port->ip_dma_ringbuf));
+ port->ip_inring = RING(port, RX_0_OR_2);
+ port->ip_outring = RING(port, TX_0_OR_2);
+ }
+ DPRINT_CONFIG(("%s : port %d [addr 0x%p] control 0x%p",
+ __func__,
+ port_number, (void *)port, (void *)control));
+ DPRINT_CONFIG((" ip_serial_regs 0x%p ip_uart_regs 0x%p\n",
+ (void *)port->ip_serial_regs,
+ (void *)port->ip_uart_regs));
+
+ /* Initialize the hardware for IOC4 */
+ port_init(port);
+
+ DPRINT_CONFIG(("%s: port_number %d port 0x%p inring 0x%p "
+ "outring 0x%p\n",
+ __func__,
+ port_number, (void *)port,
+ (void *)port->ip_inring,
+ (void *)port->ip_outring));
+
+ /* Attach interrupt handlers */
+ intr_connect(soft, IOC4_SIO_INTR_TYPE,
+ GET_SIO_IR(port_number),
+ handle_intr, port);
+
+ intr_connect(soft, IOC4_OTHER_INTR_TYPE,
+ GET_OTHER_IR(port_number),
+ handle_dma_error_intr, port);
+ }
+ return 0;
+}
+
+/**
+ * enable_intrs - enable interrupts
+ * @port: port to enable
+ * @mask: mask to use
+ */
+static void enable_intrs(struct ioc4_port *port, uint32_t mask)
+{
+ struct hooks *hooks = port->ip_hooks;
+
+ if ((port->ip_ienb & mask) != mask) {
+ write_ireg(port->ip_ioc4_soft, mask, IOC4_W_IES,
+ IOC4_SIO_INTR_TYPE);
+ port->ip_ienb |= mask;
+ }
+
+ if (port->ip_ienb)
+ write_ireg(port->ip_ioc4_soft, hooks->intr_dma_error,
+ IOC4_W_IES, IOC4_OTHER_INTR_TYPE);
+}
+
+/**
+ * local_open - local open a port
+ * @port: port to open
+ */
+static inline int local_open(struct ioc4_port *port)
+{
+ int spiniter = 0;
+
+ port->ip_flags = PORT_ACTIVE;
+
+ /* Pause the DMA interface if necessary */
+ if (port->ip_sscr & IOC4_SSCR_DMA_EN) {
+ writel(port->ip_sscr | IOC4_SSCR_DMA_PAUSE,
+ &port->ip_serial_regs->sscr);
+ while((readl(&port->ip_serial_regs-> sscr)
+ & IOC4_SSCR_PAUSE_STATE) == 0) {
+ spiniter++;
+ if (spiniter > MAXITER) {
+ port->ip_flags = PORT_INACTIVE;
+ return -1;
+ }
+ }
+ }
+
+ /* Reset the input fifo. If the uart received chars while the port
+ * was closed and DMA is not enabled, the uart may have a bunch of
+ * chars hanging around in its rx fifo which will not be discarded
+ * by rclr in the upper layer. We must get rid of them here.
+ */
+ writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR,
+ &port->ip_uart_regs->i4u_fcr);
+
+ writeb(UART_LCR_WLEN8, &port->ip_uart_regs->i4u_lcr);
+ /* UART_LCR_STOP == 1 stop */
+
+ /* Re-enable DMA, set default threshold to intr whenever there is
+ * data available.
+ */
+ port->ip_sscr &= ~IOC4_SSCR_RX_THRESHOLD;
+ port->ip_sscr |= 1; /* default threshold */
+
+ /* Plug in the new sscr. This implicitly clears the DMA_PAUSE
+ * flag if it was set above
+ */
+ writel(port->ip_sscr, &port->ip_serial_regs->sscr);
+ port->ip_tx_lowat = 1;
+ return 0;
+}
+
+/**
+ * set_rx_timeout - Set rx timeout and threshold values.
+ * @port: port to use
+ * @timeout: timeout value in ticks
+ */
+static inline int set_rx_timeout(struct ioc4_port *port, int timeout)
+{
+ int threshold;
+
+ port->ip_rx_timeout = timeout;
+
+ /* Timeout is in ticks. Let's figure out how many chars we
+ * can receive at the current baud rate in that interval
+ * and set the rx threshold to that amount. There are 4 chars
+ * per ring entry, so we'll divide the number of chars that will
+ * arrive in timeout by 4.
+ * So .... timeout * baud / 10 / HZ / 4, with HZ = 100.
+ */
+ threshold = timeout * port->ip_baud / 4000;
+ if (threshold == 0)
+ threshold = 1; /* otherwise we'll intr all the time! */
+
+ if ((unsigned)threshold > (unsigned)IOC4_SSCR_RX_THRESHOLD)
+ return 1;
+
+ port->ip_sscr &= ~IOC4_SSCR_RX_THRESHOLD;
+ port->ip_sscr |= threshold;
+
+ writel(port->ip_sscr, &port->ip_serial_regs->sscr);
+
+ /* Now set the rx timeout to the given value
+ * again timeout * IOC4_SRTR_HZ / HZ
+ */
+ timeout = timeout * IOC4_SRTR_HZ / 100;
+ if (timeout > IOC4_SRTR_CNT)
+ timeout = IOC4_SRTR_CNT;
+
+ writel(timeout, &port->ip_serial_regs->srtr);
+ return 0;
+}
+
+/**
+ * config_port - config the hardware
+ * @port: port to config
+ * @baud: baud rate for the port
+ * @byte_size: data size
+ * @stop_bits: number of stop bits
+ * @parenb: parity enable ?
+ * @parodd: odd parity ?
+ */
+static inline int
+config_port(struct ioc4_port *port,
+ int baud, int byte_size, int stop_bits, int parenb, int parodd)
+{
+ char lcr, sizebits;
+ int spiniter = 0;
+
+ DPRINT_CONFIG(("%s: baud %d byte_size %d stop %d parenb %d parodd %d\n",
+ __func__, baud, byte_size, stop_bits, parenb, parodd));
+
+ if (set_baud(port, baud))
+ return 1;
+
+ switch (byte_size) {
+ case 5:
+ sizebits = UART_LCR_WLEN5;
+ break;
+ case 6:
+ sizebits = UART_LCR_WLEN6;
+ break;
+ case 7:
+ sizebits = UART_LCR_WLEN7;
+ break;
+ case 8:
+ sizebits = UART_LCR_WLEN8;
+ break;
+ default:
+ return 1;
+ }
+
+ /* Pause the DMA interface if necessary */
+ if (port->ip_sscr & IOC4_SSCR_DMA_EN) {
+ writel(port->ip_sscr | IOC4_SSCR_DMA_PAUSE,
+ &port->ip_serial_regs->sscr);
+ while((readl(&port->ip_serial_regs->sscr)
+ & IOC4_SSCR_PAUSE_STATE) == 0) {
+ spiniter++;
+ if (spiniter > MAXITER)
+ return -1;
+ }
+ }
+
+ /* Clear relevant fields in lcr */
+ lcr = readb(&port->ip_uart_regs->i4u_lcr);
+ lcr &= ~(LCR_MASK_BITS_CHAR | UART_LCR_EPAR |
+ UART_LCR_PARITY | LCR_MASK_STOP_BITS);
+
+ /* Set byte size in lcr */
+ lcr |= sizebits;
+
+ /* Set parity */
+ if (parenb) {
+ lcr |= UART_LCR_PARITY;
+ if (!parodd)
+ lcr |= UART_LCR_EPAR;
+ }
+
+ /* Set stop bits */
+ if (stop_bits)
+ lcr |= UART_LCR_STOP /* 2 stop bits */ ;
+
+ writeb(lcr, &port->ip_uart_regs->i4u_lcr);
+
+ /* Re-enable the DMA interface if necessary */
+ if (port->ip_sscr & IOC4_SSCR_DMA_EN) {
+ writel(port->ip_sscr, &port->ip_serial_regs->sscr);
+ }
+ port->ip_baud = baud;
+
+ /* When we get within this number of ring entries of filling the
+ * entire ring on tx, place an EXPLICIT intr to generate a lowat
+ * notification when output has drained.
+ */
+ port->ip_tx_lowat = (TX_LOWAT_CHARS(baud) + 3) / 4;
+ if (port->ip_tx_lowat == 0)
+ port->ip_tx_lowat = 1;
+
+ set_rx_timeout(port, 2);
+
+ return 0;
+}
+
+/**
+ * do_write - Write bytes to the port. Returns the number of bytes
+ * actually written. Called from transmit_chars
+ * @port: port to use
+ * @buf: the stuff to write
+ * @len: how many bytes in 'buf'
+ */
+static inline int do_write(struct ioc4_port *port, char *buf, int len)
+{
+ int prod_ptr, cons_ptr, total = 0;
+ struct ring *outring;
+ struct ring_entry *entry;
+ struct hooks *hooks = port->ip_hooks;
+
+ BUG_ON(!(len >= 0));
+
+ prod_ptr = port->ip_tx_prod;
+ cons_ptr = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK;
+ outring = port->ip_outring;
+
+ /* Maintain a 1-entry red-zone. The ring buffer is full when
+ * (cons - prod) % ring_size is 1. Rather than do this subtraction
+ * in the body of the loop, I'll do it now.
+ */
+ cons_ptr = (cons_ptr - (int)sizeof(struct ring_entry)) & PROD_CONS_MASK;
+
+ /* Stuff the bytes into the output */
+ while ((prod_ptr != cons_ptr) && (len > 0)) {
+ int xx;
+
+ /* Get 4 bytes (one ring entry) at a time */
+ entry = (struct ring_entry *)((caddr_t) outring + prod_ptr);
+
+ /* Invalidate all entries */
+ entry->ring_allsc = 0;
+
+ /* Copy in some bytes */
+ for (xx = 0; (xx < 4) && (len > 0); xx++) {
+ entry->ring_data[xx] = *buf++;
+ entry->ring_sc[xx] = IOC4_TXCB_VALID;
+ len--;
+ total++;
+ }
+
+ /* If we are within some small threshold of filling up the
+ * entire ring buffer, we must place an EXPLICIT intr here
+ * to generate a lowat interrupt in case we subsequently
+ * really do fill up the ring and the caller goes to sleep.
+ * No need to place more than one though.
+ */
+ if (!(port->ip_flags & LOWAT_WRITTEN) &&
+ ((cons_ptr - prod_ptr) & PROD_CONS_MASK)
+ <= port->ip_tx_lowat
+ * (int)sizeof(struct ring_entry)) {
+ port->ip_flags |= LOWAT_WRITTEN;
+ entry->ring_sc[0] |= IOC4_TXCB_INT_WHEN_DONE;
+ }
+
+ /* Go on to next entry */
+ prod_ptr += sizeof(struct ring_entry);
+ prod_ptr &= PROD_CONS_MASK;
+ }
+
+ /* If we sent something, start DMA if necessary */
+ if (total > 0 && !(port->ip_sscr & IOC4_SSCR_DMA_EN)) {
+ port->ip_sscr |= IOC4_SSCR_DMA_EN;
+ writel(port->ip_sscr, &port->ip_serial_regs->sscr);
+ }
+
+ /* Store the new producer pointer. If tx is disabled, we stuff the
+ * data into the ring buffer, but we don't actually start tx.
+ */
+ if (!uart_tx_stopped(port->ip_port)) {
+ writel(prod_ptr, &port->ip_serial_regs->stpir);
+
+ /* If we are now transmitting, enable tx_mt interrupt so we
+ * can disable DMA if necessary when the tx finishes.
+ */
+ if (total > 0)
+ enable_intrs(port, hooks->intr_tx_mt);
+ }
+ port->ip_tx_prod = prod_ptr;
+ return total;
+}
+
+/**
+ * disable_intrs - disable interrupts
+ * @port: port to enable
+ * @mask: mask to use
+ */
+static void disable_intrs(struct ioc4_port *port, uint32_t mask)
+{
+ struct hooks *hooks = port->ip_hooks;
+
+ if (port->ip_ienb & mask) {
+ write_ireg(port->ip_ioc4_soft, mask, IOC4_W_IEC,
+ IOC4_SIO_INTR_TYPE);
+ port->ip_ienb &= ~mask;
+ }
+
+ if (!port->ip_ienb)
+ write_ireg(port->ip_ioc4_soft, hooks->intr_dma_error,
+ IOC4_W_IEC, IOC4_OTHER_INTR_TYPE);
+}
+
+/**
+ * set_notification - Modify event notification
+ * @port: port to use
+ * @mask: events mask
+ * @set_on: set ?
+ */
+static int set_notification(struct ioc4_port *port, int mask, int set_on)
+{
+ struct hooks *hooks = port->ip_hooks;
+ uint32_t intrbits, sscrbits;
+
+ BUG_ON(!mask);
+
+ intrbits = sscrbits = 0;
+
+ if (mask & N_DATA_READY)
+ intrbits |= (hooks->intr_rx_timer | hooks->intr_rx_high);
+ if (mask & N_OUTPUT_LOWAT)
+ intrbits |= hooks->intr_tx_explicit;
+ if (mask & N_DDCD) {
+ intrbits |= hooks->intr_delta_dcd;
+ sscrbits |= IOC4_SSCR_RX_RING_DCD;
+ }
+ if (mask & N_DCTS)
+ intrbits |= hooks->intr_delta_cts;
+
+ if (set_on) {
+ enable_intrs(port, intrbits);
+ port->ip_notify |= mask;
+ port->ip_sscr |= sscrbits;
+ } else {
+ disable_intrs(port, intrbits);
+ port->ip_notify &= ~mask;
+ port->ip_sscr &= ~sscrbits;
+ }
+
+ /* We require DMA if either DATA_READY or DDCD notification is
+ * currently requested. If neither of these is requested and
+ * there is currently no tx in progress, DMA may be disabled.
+ */
+ if (port->ip_notify & (N_DATA_READY | N_DDCD))
+ port->ip_sscr |= IOC4_SSCR_DMA_EN;
+ else if (!(port->ip_ienb & hooks->intr_tx_mt))
+ port->ip_sscr &= ~IOC4_SSCR_DMA_EN;
+
+ writel(port->ip_sscr, &port->ip_serial_regs->sscr);
+ return 0;
+}
+
+/**
+ * set_mcr - set the master control reg
+ * @the_port: port to use
+ * @mask1: mcr mask
+ * @mask2: shadow mask
+ */
+static inline int set_mcr(struct uart_port *the_port,
+ int mask1, int mask2)
+{
+ struct ioc4_port *port = get_ioc4_port(the_port, 0);
+ uint32_t shadow;
+ int spiniter = 0;
+ char mcr;
+
+ if (!port)
+ return -1;
+
+ /* Pause the DMA interface if necessary */
+ if (port->ip_sscr & IOC4_SSCR_DMA_EN) {
+ writel(port->ip_sscr | IOC4_SSCR_DMA_PAUSE,
+ &port->ip_serial_regs->sscr);
+ while ((readl(&port->ip_serial_regs->sscr)
+ & IOC4_SSCR_PAUSE_STATE) == 0) {
+ spiniter++;
+ if (spiniter > MAXITER)
+ return -1;
+ }
+ }
+ shadow = readl(&port->ip_serial_regs->shadow);
+ mcr = (shadow & 0xff000000) >> 24;
+
+ /* Set new value */
+ mcr |= mask1;
+ shadow |= mask2;
+
+ writeb(mcr, &port->ip_uart_regs->i4u_mcr);
+ writel(shadow, &port->ip_serial_regs->shadow);
+
+ /* Re-enable the DMA interface if necessary */
+ if (port->ip_sscr & IOC4_SSCR_DMA_EN) {
+ writel(port->ip_sscr, &port->ip_serial_regs->sscr);
+ }
+ return 0;
+}
+
+/**
+ * ioc4_set_proto - set the protocol for the port
+ * @port: port to use
+ * @proto: protocol to use
+ */
+static int ioc4_set_proto(struct ioc4_port *port, int proto)
+{
+ struct hooks *hooks = port->ip_hooks;
+
+ switch (proto) {
+ case PROTO_RS232:
+ /* Clear the appropriate GIO pin */
+ writel(0, (&port->ip_mem->gppr[hooks->rs422_select_pin].raw));
+ break;
+
+ case PROTO_RS422:
+ /* Set the appropriate GIO pin */
+ writel(1, (&port->ip_mem->gppr[hooks->rs422_select_pin].raw));
+ break;
+
+ default:
+ return 1;
+ }
+ return 0;
+}
+
+/**
+ * transmit_chars - upper level write, called with ip_lock
+ * @the_port: port to write
+ */
+static void transmit_chars(struct uart_port *the_port)
+{
+ int xmit_count, tail, head;
+ int result;
+ char *start;
+ struct tty_struct *tty;
+ struct ioc4_port *port = get_ioc4_port(the_port, 0);
+ struct uart_state *state;
+
+ if (!the_port)
+ return;
+ if (!port)
+ return;
+
+ state = the_port->state;
+ tty = state->port.tty;
+
+ if (uart_circ_empty(&state->xmit) || uart_tx_stopped(the_port)) {
+ /* Nothing to do or hw stopped */
+ set_notification(port, N_ALL_OUTPUT, 0);
+ return;
+ }
+
+ head = state->xmit.head;
+ tail = state->xmit.tail;
+ start = (char *)&state->xmit.buf[tail];
+
+ /* write out all the data or until the end of the buffer */
+ xmit_count = (head < tail) ? (UART_XMIT_SIZE - tail) : (head - tail);
+ if (xmit_count > 0) {
+ result = do_write(port, start, xmit_count);
+ if (result > 0) {
+ /* booking */
+ xmit_count -= result;
+ the_port->icount.tx += result;
+ /* advance the pointers */
+ tail += result;
+ tail &= UART_XMIT_SIZE - 1;
+ state->xmit.tail = tail;
+ start = (char *)&state->xmit.buf[tail];
+ }
+ }
+ if (uart_circ_chars_pending(&state->xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(the_port);
+
+ if (uart_circ_empty(&state->xmit)) {
+ set_notification(port, N_OUTPUT_LOWAT, 0);
+ } else {
+ set_notification(port, N_OUTPUT_LOWAT, 1);
+ }
+}
+
+/**
+ * ioc4_change_speed - change the speed of the port
+ * @the_port: port to change
+ * @new_termios: new termios settings
+ * @old_termios: old termios settings
+ */
+static void
+ioc4_change_speed(struct uart_port *the_port,
+ struct ktermios *new_termios, struct ktermios *old_termios)
+{
+ struct ioc4_port *port = get_ioc4_port(the_port, 0);
+ int baud, bits;
+ unsigned cflag, iflag;
+ int new_parity = 0, new_parity_enable = 0, new_stop = 0, new_data = 8;
+ struct uart_state *state = the_port->state;
+
+ cflag = new_termios->c_cflag;
+ iflag = new_termios->c_iflag;
+
+ switch (cflag & CSIZE) {
+ case CS5:
+ new_data = 5;
+ bits = 7;
+ break;
+ case CS6:
+ new_data = 6;
+ bits = 8;
+ break;
+ case CS7:
+ new_data = 7;
+ bits = 9;
+ break;
+ case CS8:
+ new_data = 8;
+ bits = 10;
+ break;
+ default:
+ /* cuz we always need a default ... */
+ new_data = 5;
+ bits = 7;
+ break;
+ }
+ if (cflag & CSTOPB) {
+ bits++;
+ new_stop = 1;
+ }
+ if (cflag & PARENB) {
+ bits++;
+ new_parity_enable = 1;
+ if (cflag & PARODD)
+ new_parity = 1;
+ }
+ baud = uart_get_baud_rate(the_port, new_termios, old_termios,
+ MIN_BAUD_SUPPORTED, MAX_BAUD_SUPPORTED);
+ DPRINT_CONFIG(("%s: returned baud %d\n", __func__, baud));
+
+ /* default is 9600 */
+ if (!baud)
+ baud = 9600;
+
+ if (!the_port->fifosize)
+ the_port->fifosize = IOC4_FIFO_CHARS;
+ the_port->timeout = ((the_port->fifosize * HZ * bits) / (baud / 10));
+ the_port->timeout += HZ / 50; /* Add .02 seconds of slop */
+
+ the_port->ignore_status_mask = N_ALL_INPUT;
+
+ state->port.tty->low_latency = 1;
+
+ if (iflag & IGNPAR)
+ the_port->ignore_status_mask &= ~(N_PARITY_ERROR
+ | N_FRAMING_ERROR);
+ if (iflag & IGNBRK) {
+ the_port->ignore_status_mask &= ~N_BREAK;
+ if (iflag & IGNPAR)
+ the_port->ignore_status_mask &= ~N_OVERRUN_ERROR;
+ }
+ if (!(cflag & CREAD)) {
+ /* ignore everything */
+ the_port->ignore_status_mask &= ~N_DATA_READY;
+ }
+
+ if (cflag & CRTSCTS) {
+ port->ip_sscr |= IOC4_SSCR_HFC_EN;
+ }
+ else {
+ port->ip_sscr &= ~IOC4_SSCR_HFC_EN;
+ }
+ writel(port->ip_sscr, &port->ip_serial_regs->sscr);
+
+ /* Set the configuration and proper notification call */
+ DPRINT_CONFIG(("%s : port 0x%p cflag 0%o "
+ "config_port(baud %d data %d stop %d p enable %d parity %d),"
+ " notification 0x%x\n",
+ __func__, (void *)port, cflag, baud, new_data, new_stop,
+ new_parity_enable, new_parity, the_port->ignore_status_mask));
+
+ if ((config_port(port, baud, /* baud */
+ new_data, /* byte size */
+ new_stop, /* stop bits */
+ new_parity_enable, /* set parity */
+ new_parity)) >= 0) { /* parity 1==odd */
+ set_notification(port, the_port->ignore_status_mask, 1);
+ }
+}
+
+/**
+ * ic4_startup_local - Start up the serial port - returns >= 0 if no errors
+ * @the_port: Port to operate on
+ */
+static inline int ic4_startup_local(struct uart_port *the_port)
+{
+ struct ioc4_port *port;
+ struct uart_state *state;
+
+ if (!the_port)
+ return -1;
+
+ port = get_ioc4_port(the_port, 0);
+ if (!port)
+ return -1;
+
+ state = the_port->state;
+
+ local_open(port);
+
+ /* set the protocol - mapbase has the port type */
+ ioc4_set_proto(port, the_port->mapbase);
+
+ /* set the speed of the serial port */
+ ioc4_change_speed(the_port, state->port.tty->termios,
+ (struct ktermios *)0);
+
+ return 0;
+}
+
+/*
+ * ioc4_cb_output_lowat - called when the output low water mark is hit
+ * @the_port: port to output
+ */
+static void ioc4_cb_output_lowat(struct uart_port *the_port)
+{
+ unsigned long pflags;
+
+ /* ip_lock is set on the call here */
+ if (the_port) {
+ spin_lock_irqsave(&the_port->lock, pflags);
+ transmit_chars(the_port);
+ spin_unlock_irqrestore(&the_port->lock, pflags);
+ }
+}
+
+/**
+ * handle_intr - service any interrupts for the given port - 2nd level
+ * called via sd_intr
+ * @arg: handler arg
+ * @sio_ir: ioc4regs
+ */
+static void handle_intr(void *arg, uint32_t sio_ir)
+{
+ struct ioc4_port *port = (struct ioc4_port *)arg;
+ struct hooks *hooks = port->ip_hooks;
+ unsigned int rx_high_rd_aborted = 0;
+ unsigned long flags;
+ struct uart_port *the_port;
+ int loop_counter;
+
+ /* Possible race condition here: The tx_mt interrupt bit may be
+ * cleared without the intervention of the interrupt handler,
+ * e.g. by a write. If the top level interrupt handler reads a
+ * tx_mt, then some other processor does a write, starting up
+ * output, then we come in here, see the tx_mt and stop DMA, the
+ * output started by the other processor will hang. Thus we can
+ * only rely on tx_mt being legitimate if it is read while the
+ * port lock is held. Therefore this bit must be ignored in the
+ * passed in interrupt mask which was read by the top level
+ * interrupt handler since the port lock was not held at the time
+ * it was read. We can only rely on this bit being accurate if it
+ * is read while the port lock is held. So we'll clear it for now,
+ * and reload it later once we have the port lock.
+ */
+ sio_ir &= ~(hooks->intr_tx_mt);
+
+ spin_lock_irqsave(&port->ip_lock, flags);
+
+ loop_counter = MAXITER; /* to avoid hangs */
+
+ do {
+ uint32_t shadow;
+
+ if ( loop_counter-- <= 0 ) {
+ printk(KERN_WARNING "IOC4 serial: "
+ "possible hang condition/"
+ "port stuck on interrupt.\n");
+ break;
+ }
+
+ /* Handle a DCD change */
+ if (sio_ir & hooks->intr_delta_dcd) {
+ /* ACK the interrupt */
+ writel(hooks->intr_delta_dcd,
+ &port->ip_mem->sio_ir.raw);
+
+ shadow = readl(&port->ip_serial_regs->shadow);
+
+ if ((port->ip_notify & N_DDCD)
+ && (shadow & IOC4_SHADOW_DCD)
+ && (port->ip_port)) {
+ the_port = port->ip_port;
+ the_port->icount.dcd = 1;
+ wake_up_interruptible
+ (&the_port->state->port.delta_msr_wait);
+ } else if ((port->ip_notify & N_DDCD)
+ && !(shadow & IOC4_SHADOW_DCD)) {
+ /* Flag delta DCD/no DCD */
+ port->ip_flags |= DCD_ON;
+ }
+ }
+
+ /* Handle a CTS change */
+ if (sio_ir & hooks->intr_delta_cts) {
+ /* ACK the interrupt */
+ writel(hooks->intr_delta_cts,
+ &port->ip_mem->sio_ir.raw);
+
+ shadow = readl(&port->ip_serial_regs->shadow);
+
+ if ((port->ip_notify & N_DCTS)
+ && (port->ip_port)) {
+ the_port = port->ip_port;
+ the_port->icount.cts =
+ (shadow & IOC4_SHADOW_CTS) ? 1 : 0;
+ wake_up_interruptible
+ (&the_port->state->port.delta_msr_wait);
+ }
+ }
+
+ /* rx timeout interrupt. Must be some data available. Put this
+ * before the check for rx_high since servicing this condition
+ * may cause that condition to clear.
+ */
+ if (sio_ir & hooks->intr_rx_timer) {
+ /* ACK the interrupt */
+ writel(hooks->intr_rx_timer,
+ &port->ip_mem->sio_ir.raw);
+
+ if ((port->ip_notify & N_DATA_READY)
+ && (port->ip_port)) {
+ /* ip_lock is set on call here */
+ receive_chars(port->ip_port);
+ }
+ }
+
+ /* rx high interrupt. Must be after rx_timer. */
+ else if (sio_ir & hooks->intr_rx_high) {
+ /* Data available, notify upper layer */
+ if ((port->ip_notify & N_DATA_READY)
+ && port->ip_port) {
+ /* ip_lock is set on call here */
+ receive_chars(port->ip_port);
+ }
+
+ /* We can't ACK this interrupt. If receive_chars didn't
+ * cause the condition to clear, we'll have to disable
+ * the interrupt until the data is drained.
+ * If the read was aborted, don't disable the interrupt
+ * as this may cause us to hang indefinitely. An
+ * aborted read generally means that this interrupt
+ * hasn't been delivered to the cpu yet anyway, even
+ * though we see it as asserted when we read the sio_ir.
+ */
+ if ((sio_ir = PENDING(port)) & hooks->intr_rx_high) {
+ if ((port->ip_flags & READ_ABORTED) == 0) {
+ port->ip_ienb &= ~hooks->intr_rx_high;
+ port->ip_flags |= INPUT_HIGH;
+ } else {
+ rx_high_rd_aborted++;
+ }
+ }
+ }
+
+ /* We got a low water interrupt: notify upper layer to
+ * send more data. Must come before tx_mt since servicing
+ * this condition may cause that condition to clear.
+ */
+ if (sio_ir & hooks->intr_tx_explicit) {
+ port->ip_flags &= ~LOWAT_WRITTEN;
+
+ /* ACK the interrupt */
+ writel(hooks->intr_tx_explicit,
+ &port->ip_mem->sio_ir.raw);
+
+ if (port->ip_notify & N_OUTPUT_LOWAT)
+ ioc4_cb_output_lowat(port->ip_port);
+ }
+
+ /* Handle tx_mt. Must come after tx_explicit. */
+ else if (sio_ir & hooks->intr_tx_mt) {
+ /* If we are expecting a lowat notification
+ * and we get to this point it probably means that for
+ * some reason the tx_explicit didn't work as expected
+ * (that can legitimately happen if the output buffer is
+ * filled up in just the right way).
+ * So send the notification now.
+ */
+ if (port->ip_notify & N_OUTPUT_LOWAT) {
+ ioc4_cb_output_lowat(port->ip_port);
+
+ /* We need to reload the sio_ir since the lowat
+ * call may have caused another write to occur,
+ * clearing the tx_mt condition.
+ */
+ sio_ir = PENDING(port);
+ }
+
+ /* If the tx_mt condition still persists even after the
+ * lowat call, we've got some work to do.
+ */
+ if (sio_ir & hooks->intr_tx_mt) {
+
+ /* If we are not currently expecting DMA input,
+ * and the transmitter has just gone idle,
+ * there is no longer any reason for DMA, so
+ * disable it.
+ */
+ if (!(port->ip_notify
+ & (N_DATA_READY | N_DDCD))) {
+ BUG_ON(!(port->ip_sscr
+ & IOC4_SSCR_DMA_EN));
+ port->ip_sscr &= ~IOC4_SSCR_DMA_EN;
+ writel(port->ip_sscr,
+ &port->ip_serial_regs->sscr);
+ }
+
+ /* Prevent infinite tx_mt interrupt */
+ port->ip_ienb &= ~hooks->intr_tx_mt;
+ }
+ }
+ sio_ir = PENDING(port);
+
+ /* if the read was aborted and only hooks->intr_rx_high,
+ * clear hooks->intr_rx_high, so we do not loop forever.
+ */
+
+ if (rx_high_rd_aborted && (sio_ir == hooks->intr_rx_high)) {
+ sio_ir &= ~hooks->intr_rx_high;
+ }
+ } while (sio_ir & hooks->intr_all);
+
+ spin_unlock_irqrestore(&port->ip_lock, flags);
+
+ /* Re-enable interrupts before returning from interrupt handler.
+ * Getting interrupted here is okay. It'll just v() our semaphore, and
+ * we'll come through the loop again.
+ */
+
+ write_ireg(port->ip_ioc4_soft, port->ip_ienb, IOC4_W_IES,
+ IOC4_SIO_INTR_TYPE);
+}
+
+/*
+ * ioc4_cb_post_ncs - called for some basic errors
+ * @port: port to use
+ * @ncs: event
+ */
+static void ioc4_cb_post_ncs(struct uart_port *the_port, int ncs)
+{
+ struct uart_icount *icount;
+
+ icount = &the_port->icount;
+
+ if (ncs & NCS_BREAK)
+ icount->brk++;
+ if (ncs & NCS_FRAMING)
+ icount->frame++;
+ if (ncs & NCS_OVERRUN)
+ icount->overrun++;
+ if (ncs & NCS_PARITY)
+ icount->parity++;
+}
+
+/**
+ * do_read - Read in bytes from the port. Return the number of bytes
+ * actually read.
+ * @the_port: port to use
+ * @buf: place to put the stuff we read
+ * @len: how big 'buf' is
+ */
+
+static inline int do_read(struct uart_port *the_port, unsigned char *buf,
+ int len)
+{
+ int prod_ptr, cons_ptr, total;
+ struct ioc4_port *port = get_ioc4_port(the_port, 0);
+ struct ring *inring;
+ struct ring_entry *entry;
+ struct hooks *hooks = port->ip_hooks;
+ int byte_num;
+ char *sc;
+ int loop_counter;
+
+ BUG_ON(!(len >= 0));
+ BUG_ON(!port);
+
+ /* There is a nasty timing issue in the IOC4. When the rx_timer
+ * expires or the rx_high condition arises, we take an interrupt.
+ * At some point while servicing the interrupt, we read bytes from
+ * the ring buffer and re-arm the rx_timer. However the rx_timer is
+ * not started until the first byte is received *after* it is armed,
+ * and any bytes pending in the rx construction buffers are not drained
+ * to memory until either there are 4 bytes available or the rx_timer
+ * expires. This leads to a potential situation where data is left
+ * in the construction buffers forever - 1 to 3 bytes were received
+ * after the interrupt was generated but before the rx_timer was
+ * re-armed. At that point as long as no subsequent bytes are received
+ * the timer will never be started and the bytes will remain in the
+ * construction buffer forever. The solution is to execute a DRAIN
+ * command after rearming the timer. This way any bytes received before
+ * the DRAIN will be drained to memory, and any bytes received after
+ * the DRAIN will start the TIMER and be drained when it expires.
+ * Luckily, this only needs to be done when the DMA buffer is empty
+ * since there is no requirement that this function return all
+ * available data as long as it returns some.
+ */
+ /* Re-arm the timer */
+ writel(port->ip_rx_cons | IOC4_SRCIR_ARM, &port->ip_serial_regs->srcir);
+
+ prod_ptr = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK;
+ cons_ptr = port->ip_rx_cons;
+
+ if (prod_ptr == cons_ptr) {
+ int reset_dma = 0;
+
+ /* Input buffer appears empty, do a flush. */
+
+ /* DMA must be enabled for this to work. */
+ if (!(port->ip_sscr & IOC4_SSCR_DMA_EN)) {
+ port->ip_sscr |= IOC4_SSCR_DMA_EN;
+ reset_dma = 1;
+ }
+
+ /* Potential race condition: we must reload the srpir after
+ * issuing the drain command, otherwise we could think the rx
+ * buffer is empty, then take a very long interrupt, and when
+ * we come back it's full and we wait forever for the drain to
+ * complete.
+ */
+ writel(port->ip_sscr | IOC4_SSCR_RX_DRAIN,
+ &port->ip_serial_regs->sscr);
+ prod_ptr = readl(&port->ip_serial_regs->srpir)
+ & PROD_CONS_MASK;
+
+ /* We must not wait for the DRAIN to complete unless there are
+ * at least 8 bytes (2 ring entries) available to receive the
+ * data otherwise the DRAIN will never complete and we'll
+ * deadlock here.
+ * In fact, to make things easier, I'll just ignore the flush if
+ * there is any data at all now available.
+ */
+ if (prod_ptr == cons_ptr) {
+ loop_counter = 0;
+ while (readl(&port->ip_serial_regs->sscr) &
+ IOC4_SSCR_RX_DRAIN) {
+ loop_counter++;
+ if (loop_counter > MAXITER)
+ return -1;
+ }
+
+ /* SIGH. We have to reload the prod_ptr *again* since
+ * the drain may have caused it to change
+ */
+ prod_ptr = readl(&port->ip_serial_regs->srpir)
+ & PROD_CONS_MASK;
+ }
+ if (reset_dma) {
+ port->ip_sscr &= ~IOC4_SSCR_DMA_EN;
+ writel(port->ip_sscr, &port->ip_serial_regs->sscr);
+ }
+ }
+ inring = port->ip_inring;
+ port->ip_flags &= ~READ_ABORTED;
+
+ total = 0;
+ loop_counter = 0xfffff; /* to avoid hangs */
+
+ /* Grab bytes from the hardware */
+ while ((prod_ptr != cons_ptr) && (len > 0)) {
+ entry = (struct ring_entry *)((caddr_t)inring + cons_ptr);
+
+ if ( loop_counter-- <= 0 ) {
+ printk(KERN_WARNING "IOC4 serial: "
+ "possible hang condition/"
+ "port stuck on read.\n");
+ break;
+ }
+
+ /* According to the producer pointer, this ring entry
+ * must contain some data. But if the PIO happened faster
+ * than the DMA, the data may not be available yet, so let's
+ * wait until it arrives.
+ */
+ if ((entry->ring_allsc & RING_ANY_VALID) == 0) {
+ /* Indicate the read is aborted so we don't disable
+ * the interrupt thinking that the consumer is
+ * congested.
+ */
+ port->ip_flags |= READ_ABORTED;
+ len = 0;
+ break;
+ }
+
+ /* Load the bytes/status out of the ring entry */
+ for (byte_num = 0; byte_num < 4 && len > 0; byte_num++) {
+ sc = &(entry->ring_sc[byte_num]);
+
+ /* Check for change in modem state or overrun */
+ if ((*sc & IOC4_RXSB_MODEM_VALID)
+ && (port->ip_notify & N_DDCD)) {
+ /* Notify upper layer if DCD dropped */
+
+ if ((port->ip_flags & DCD_ON)
+ && !(*sc & IOC4_RXSB_DCD)) {
+
+ /* If we have already copied some data,
+ * return it. We'll pick up the carrier
+ * drop on the next pass. That way we
+ * don't throw away the data that has
+ * already been copied back to
+ * the caller's buffer.
+ */
+ if (total > 0) {
+ len = 0;
+ break;
+ }
+ port->ip_flags &= ~DCD_ON;
+
+ /* Turn off this notification so the
+ * carrier drop protocol won't see it
+ * again when it does a read.
+ */
+ *sc &= ~IOC4_RXSB_MODEM_VALID;
+
+ /* To keep things consistent, we need
+ * to update the consumer pointer so
+ * the next reader won't come in and
+ * try to read the same ring entries
+ * again. This must be done here before
+ * the dcd change.
+ */
+
+ if ((entry->ring_allsc & RING_ANY_VALID)
+ == 0) {
+ cons_ptr += (int)sizeof
+ (struct ring_entry);
+ cons_ptr &= PROD_CONS_MASK;
+ }
+ writel(cons_ptr,
+ &port->ip_serial_regs->srcir);
+ port->ip_rx_cons = cons_ptr;
+
+ /* Notify upper layer of carrier drop */
+ if ((port->ip_notify & N_DDCD)
+ && port->ip_port) {
+ the_port->icount.dcd = 0;
+ wake_up_interruptible
+ (&the_port->state->
+ port.delta_msr_wait);
+ }
+
+ /* If we had any data to return, we
+ * would have returned it above.
+ */
+ return 0;
+ }
+ }
+ if (*sc & IOC4_RXSB_MODEM_VALID) {
+ /* Notify that an input overrun occurred */
+ if ((*sc & IOC4_RXSB_OVERRUN)
+ && (port->ip_notify & N_OVERRUN_ERROR)) {
+ ioc4_cb_post_ncs(the_port, NCS_OVERRUN);
+ }
+ /* Don't look at this byte again */
+ *sc &= ~IOC4_RXSB_MODEM_VALID;
+ }
+
+ /* Check for valid data or RX errors */
+ if ((*sc & IOC4_RXSB_DATA_VALID) &&
+ ((*sc & (IOC4_RXSB_PAR_ERR
+ | IOC4_RXSB_FRAME_ERR
+ | IOC4_RXSB_BREAK))
+ && (port->ip_notify & (N_PARITY_ERROR
+ | N_FRAMING_ERROR
+ | N_BREAK)))) {
+ /* There is an error condition on the next byte.
+ * If we have already transferred some bytes,
+ * we'll stop here. Otherwise if this is the
+ * first byte to be read, we'll just transfer
+ * it alone after notifying the
+ * upper layer of its status.
+ */
+ if (total > 0) {
+ len = 0;
+ break;
+ } else {
+ if ((*sc & IOC4_RXSB_PAR_ERR) &&
+ (port->ip_notify & N_PARITY_ERROR)) {
+ ioc4_cb_post_ncs(the_port,
+ NCS_PARITY);
+ }
+ if ((*sc & IOC4_RXSB_FRAME_ERR) &&
+ (port->ip_notify & N_FRAMING_ERROR)){
+ ioc4_cb_post_ncs(the_port,
+ NCS_FRAMING);
+ }
+ if ((*sc & IOC4_RXSB_BREAK)
+ && (port->ip_notify & N_BREAK)) {
+ ioc4_cb_post_ncs
+ (the_port,
+ NCS_BREAK);
+ }
+ len = 1;
+ }
+ }
+ if (*sc & IOC4_RXSB_DATA_VALID) {
+ *sc &= ~IOC4_RXSB_DATA_VALID;
+ *buf = entry->ring_data[byte_num];
+ buf++;
+ len--;
+ total++;
+ }
+ }
+
+ /* If we used up this entry entirely, go on to the next one,
+ * otherwise we must have run out of buffer space, so
+ * leave the consumer pointer here for the next read in case
+ * there are still unread bytes in this entry.
+ */
+ if ((entry->ring_allsc & RING_ANY_VALID) == 0) {
+ cons_ptr += (int)sizeof(struct ring_entry);
+ cons_ptr &= PROD_CONS_MASK;
+ }
+ }
+
+ /* Update consumer pointer and re-arm rx timer interrupt */
+ writel(cons_ptr, &port->ip_serial_regs->srcir);
+ port->ip_rx_cons = cons_ptr;
+
+ /* If we have now dipped below the rx high water mark and we have
+ * rx_high interrupt turned off, we can now turn it back on again.
+ */
+ if ((port->ip_flags & INPUT_HIGH) && (((prod_ptr - cons_ptr)
+ & PROD_CONS_MASK) < ((port->ip_sscr &
+ IOC4_SSCR_RX_THRESHOLD)
+ << IOC4_PROD_CONS_PTR_OFF))) {
+ port->ip_flags &= ~INPUT_HIGH;
+ enable_intrs(port, hooks->intr_rx_high);
+ }
+ return total;
+}
+
+/**
+ * receive_chars - upper level read. Called with ip_lock.
+ * @the_port: port to read from
+ */
+static void receive_chars(struct uart_port *the_port)
+{
+ struct tty_struct *tty;
+ unsigned char ch[IOC4_MAX_CHARS];
+ int read_count, request_count = IOC4_MAX_CHARS;
+ struct uart_icount *icount;
+ struct uart_state *state = the_port->state;
+ unsigned long pflags;
+
+ /* Make sure all the pointers are "good" ones */
+ if (!state)
+ return;
+ if (!state->port.tty)
+ return;
+
+ spin_lock_irqsave(&the_port->lock, pflags);
+ tty = state->port.tty;
+
+ request_count = tty_buffer_request_room(tty, IOC4_MAX_CHARS);
+
+ if (request_count > 0) {
+ icount = &the_port->icount;
+ read_count = do_read(the_port, ch, request_count);
+ if (read_count > 0) {
+ tty_insert_flip_string(tty, ch, read_count);
+ icount->rx += read_count;
+ }
+ }
+
+ spin_unlock_irqrestore(&the_port->lock, pflags);
+
+ tty_flip_buffer_push(tty);
+}
+
+/**
+ * ic4_type - What type of console are we?
+ * @port: Port to operate with (we ignore since we only have one port)
+ *
+ */
+static const char *ic4_type(struct uart_port *the_port)
+{
+ if (the_port->mapbase == PROTO_RS232)
+ return "SGI IOC4 Serial [rs232]";
+ else
+ return "SGI IOC4 Serial [rs422]";
+}
+
+/**
+ * ic4_tx_empty - Is the transmitter empty?
+ * @port: Port to operate on
+ *
+ */
+static unsigned int ic4_tx_empty(struct uart_port *the_port)
+{
+ struct ioc4_port *port = get_ioc4_port(the_port, 0);
+ unsigned int ret = 0;
+
+ if (port_is_active(port, the_port)) {
+ if (readl(&port->ip_serial_regs->shadow) & IOC4_SHADOW_TEMT)
+ ret = TIOCSER_TEMT;
+ }
+ return ret;
+}
+
+/**
+ * ic4_stop_tx - stop the transmitter
+ * @port: Port to operate on
+ *
+ */
+static void ic4_stop_tx(struct uart_port *the_port)
+{
+ struct ioc4_port *port = get_ioc4_port(the_port, 0);
+
+ if (port_is_active(port, the_port))
+ set_notification(port, N_OUTPUT_LOWAT, 0);
+}
+
+/**
+ * null_void_function -
+ * @port: Port to operate on
+ *
+ */
+static void null_void_function(struct uart_port *the_port)
+{
+}
+
+/**
+ * ic4_shutdown - shut down the port - free irq and disable
+ * @port: Port to shut down
+ *
+ */
+static void ic4_shutdown(struct uart_port *the_port)
+{
+ unsigned long port_flags;
+ struct ioc4_port *port;
+ struct uart_state *state;
+
+ port = get_ioc4_port(the_port, 0);
+ if (!port)
+ return;
+
+ state = the_port->state;
+ port->ip_port = NULL;
+
+ wake_up_interruptible(&state->port.delta_msr_wait);
+
+ if (state->port.tty)
+ set_bit(TTY_IO_ERROR, &state->port.tty->flags);
+
+ spin_lock_irqsave(&the_port->lock, port_flags);
+ set_notification(port, N_ALL, 0);
+ port->ip_flags = PORT_INACTIVE;
+ spin_unlock_irqrestore(&the_port->lock, port_flags);
+}
+
+/**
+ * ic4_set_mctrl - set control lines (dtr, rts, etc)
+ * @port: Port to operate on
+ * @mctrl: Lines to set/unset
+ *
+ */
+static void ic4_set_mctrl(struct uart_port *the_port, unsigned int mctrl)
+{
+ unsigned char mcr = 0;
+ struct ioc4_port *port;
+
+ port = get_ioc4_port(the_port, 0);
+ if (!port_is_active(port, the_port))
+ return;
+
+ if (mctrl & TIOCM_RTS)
+ mcr |= UART_MCR_RTS;
+ if (mctrl & TIOCM_DTR)
+ mcr |= UART_MCR_DTR;
+ if (mctrl & TIOCM_OUT1)
+ mcr |= UART_MCR_OUT1;
+ if (mctrl & TIOCM_OUT2)
+ mcr |= UART_MCR_OUT2;
+ if (mctrl & TIOCM_LOOP)
+ mcr |= UART_MCR_LOOP;
+
+ set_mcr(the_port, mcr, IOC4_SHADOW_DTR);
+}
+
+/**
+ * ic4_get_mctrl - get control line info
+ * @port: port to operate on
+ *
+ */
+static unsigned int ic4_get_mctrl(struct uart_port *the_port)
+{
+ struct ioc4_port *port = get_ioc4_port(the_port, 0);
+ uint32_t shadow;
+ unsigned int ret = 0;
+
+ if (!port_is_active(port, the_port))
+ return 0;
+
+ shadow = readl(&port->ip_serial_regs->shadow);
+ if (shadow & IOC4_SHADOW_DCD)
+ ret |= TIOCM_CAR;
+ if (shadow & IOC4_SHADOW_DR)
+ ret |= TIOCM_DSR;
+ if (shadow & IOC4_SHADOW_CTS)
+ ret |= TIOCM_CTS;
+ return ret;
+}
+
+/**
+ * ic4_start_tx - Start transmitter, flush any output
+ * @port: Port to operate on
+ *
+ */
+static void ic4_start_tx(struct uart_port *the_port)
+{
+ struct ioc4_port *port = get_ioc4_port(the_port, 0);
+
+ if (port_is_active(port, the_port)) {
+ set_notification(port, N_OUTPUT_LOWAT, 1);
+ enable_intrs(port, port->ip_hooks->intr_tx_mt);
+ }
+}
+
+/**
+ * ic4_break_ctl - handle breaks
+ * @port: Port to operate on
+ * @break_state: Break state
+ *
+ */
+static void ic4_break_ctl(struct uart_port *the_port, int break_state)
+{
+}
+
+/**
+ * ic4_startup - Start up the serial port
+ * @port: Port to operate on
+ *
+ */
+static int ic4_startup(struct uart_port *the_port)
+{
+ int retval;
+ struct ioc4_port *port;
+ struct ioc4_control *control;
+ struct uart_state *state;
+ unsigned long port_flags;
+
+ if (!the_port)
+ return -ENODEV;
+ port = get_ioc4_port(the_port, 1);
+ if (!port)
+ return -ENODEV;
+ state = the_port->state;
+
+ control = port->ip_control;
+ if (!control) {
+ port->ip_port = NULL;
+ return -ENODEV;
+ }
+
+ /* Start up the serial port */
+ spin_lock_irqsave(&the_port->lock, port_flags);
+ retval = ic4_startup_local(the_port);
+ spin_unlock_irqrestore(&the_port->lock, port_flags);
+ return retval;
+}
+
+/**
+ * ic4_set_termios - set termios stuff
+ * @port: port to operate on
+ * @termios: New settings
+ * @termios: Old
+ *
+ */
+static void
+ic4_set_termios(struct uart_port *the_port,
+ struct ktermios *termios, struct ktermios *old_termios)
+{
+ unsigned long port_flags;
+
+ spin_lock_irqsave(&the_port->lock, port_flags);
+ ioc4_change_speed(the_port, termios, old_termios);
+ spin_unlock_irqrestore(&the_port->lock, port_flags);
+}
+
+/**
+ * ic4_request_port - allocate resources for port - no op....
+ * @port: port to operate on
+ *
+ */
+static int ic4_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+/* Associate the uart functions above - given to serial core */
+
+static struct uart_ops ioc4_ops = {
+ .tx_empty = ic4_tx_empty,
+ .set_mctrl = ic4_set_mctrl,
+ .get_mctrl = ic4_get_mctrl,
+ .stop_tx = ic4_stop_tx,
+ .start_tx = ic4_start_tx,
+ .stop_rx = null_void_function,
+ .enable_ms = null_void_function,
+ .break_ctl = ic4_break_ctl,
+ .startup = ic4_startup,
+ .shutdown = ic4_shutdown,
+ .set_termios = ic4_set_termios,
+ .type = ic4_type,
+ .release_port = null_void_function,
+ .request_port = ic4_request_port,
+};
+
+/*
+ * Boot-time initialization code
+ */
+
+static struct uart_driver ioc4_uart_rs232 = {
+ .owner = THIS_MODULE,
+ .driver_name = "ioc4_serial_rs232",
+ .dev_name = DEVICE_NAME_RS232,
+ .major = DEVICE_MAJOR,
+ .minor = DEVICE_MINOR_RS232,
+ .nr = IOC4_NUM_CARDS * IOC4_NUM_SERIAL_PORTS,
+};
+
+static struct uart_driver ioc4_uart_rs422 = {
+ .owner = THIS_MODULE,
+ .driver_name = "ioc4_serial_rs422",
+ .dev_name = DEVICE_NAME_RS422,
+ .major = DEVICE_MAJOR,
+ .minor = DEVICE_MINOR_RS422,
+ .nr = IOC4_NUM_CARDS * IOC4_NUM_SERIAL_PORTS,
+};
+
+
+/**
+ * ioc4_serial_remove_one - detach function
+ *
+ * @idd: IOC4 master module data for this IOC4
+ */
+
+static int ioc4_serial_remove_one(struct ioc4_driver_data *idd)
+{
+ int port_num, port_type;
+ struct ioc4_control *control;
+ struct uart_port *the_port;
+ struct ioc4_port *port;
+ struct ioc4_soft *soft;
+
+ /* If serial driver did not attach, don't try to detach */
+ control = idd->idd_serial_data;
+ if (!control)
+ return 0;
+
+ for (port_num = 0; port_num < IOC4_NUM_SERIAL_PORTS; port_num++) {
+ for (port_type = UART_PORT_MIN;
+ port_type < UART_PORT_COUNT;
+ port_type++) {
+ the_port = &control->ic_port[port_num].icp_uart_port
+ [port_type];
+ if (the_port) {
+ switch (port_type) {
+ case UART_PORT_RS422:
+ uart_remove_one_port(&ioc4_uart_rs422,
+ the_port);
+ break;
+ default:
+ case UART_PORT_RS232:
+ uart_remove_one_port(&ioc4_uart_rs232,
+ the_port);
+ break;
+ }
+ }
+ }
+ port = control->ic_port[port_num].icp_port;
+ /* we allocate in pairs */
+ if (!(port_num & 1) && port) {
+ pci_free_consistent(port->ip_pdev,
+ TOTAL_RING_BUF_SIZE,
+ port->ip_cpu_ringbuf,
+ port->ip_dma_ringbuf);
+ kfree(port);
+ }
+ }
+ soft = control->ic_soft;
+ if (soft) {
+ free_irq(control->ic_irq, soft);
+ if (soft->is_ioc4_serial_addr) {
+ iounmap(soft->is_ioc4_serial_addr);
+ release_mem_region((unsigned long)
+ soft->is_ioc4_serial_addr,
+ sizeof(struct ioc4_serial));
+ }
+ kfree(soft);
+ }
+ kfree(control);
+ idd->idd_serial_data = NULL;
+
+ return 0;
+}
+
+
+/**
+ * ioc4_serial_core_attach_rs232 - register with serial core
+ * This is done during pci probing
+ * @pdev: handle for this card
+ */
+static inline int
+ioc4_serial_core_attach(struct pci_dev *pdev, int port_type)
+{
+ struct ioc4_port *port;
+ struct uart_port *the_port;
+ struct ioc4_driver_data *idd = pci_get_drvdata(pdev);
+ struct ioc4_control *control = idd->idd_serial_data;
+ int port_num;
+ int port_type_idx;
+ struct uart_driver *u_driver;
+
+
+ DPRINT_CONFIG(("%s: attach pdev 0x%p - control 0x%p\n",
+ __func__, pdev, (void *)control));
+
+ if (!control)
+ return -ENODEV;
+
+ port_type_idx = (port_type == PROTO_RS232) ? UART_PORT_RS232
+ : UART_PORT_RS422;
+
+ u_driver = (port_type == PROTO_RS232) ? &ioc4_uart_rs232
+ : &ioc4_uart_rs422;
+
+ /* once around for each port on this card */
+ for (port_num = 0; port_num < IOC4_NUM_SERIAL_PORTS; port_num++) {
+ the_port = &control->ic_port[port_num].icp_uart_port
+ [port_type_idx];
+ port = control->ic_port[port_num].icp_port;
+ port->ip_all_ports[port_type_idx] = the_port;
+
+ DPRINT_CONFIG(("%s: attach the_port 0x%p / port 0x%p : type %s\n",
+ __func__, (void *)the_port,
+ (void *)port,
+ port_type == PROTO_RS232 ? "rs232" : "rs422"));
+
+ /* membase, iobase and mapbase just need to be non-0 */
+ the_port->membase = (unsigned char __iomem *)1;
+ the_port->iobase = (pdev->bus->number << 16) | port_num;
+ the_port->line = (Num_of_ioc4_cards << 2) | port_num;
+ the_port->mapbase = port_type;
+ the_port->type = PORT_16550A;
+ the_port->fifosize = IOC4_FIFO_CHARS;
+ the_port->ops = &ioc4_ops;
+ the_port->irq = control->ic_irq;
+ the_port->dev = &pdev->dev;
+ spin_lock_init(&the_port->lock);
+ if (uart_add_one_port(u_driver, the_port) < 0) {
+ printk(KERN_WARNING
+ "%s: unable to add port %d bus %d\n",
+ __func__, the_port->line, pdev->bus->number);
+ } else {
+ DPRINT_CONFIG(
+ ("IOC4 serial port %d irq = %d, bus %d\n",
+ the_port->line, the_port->irq, pdev->bus->number));
+ }
+ }
+ return 0;
+}
+
+/**
+ * ioc4_serial_attach_one - register attach function
+ * called per card found from IOC4 master module.
+ * @idd: Master module data for this IOC4
+ */
+int
+ioc4_serial_attach_one(struct ioc4_driver_data *idd)
+{
+ unsigned long tmp_addr1;
+ struct ioc4_serial __iomem *serial;
+ struct ioc4_soft *soft;
+ struct ioc4_control *control;
+ int ret = 0;
+
+
+ DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __func__, idd->idd_pdev,
+ idd->idd_pci_id));
+
+ /* PCI-RT does not bring out serial connections.
+ * Do not attach to this particular IOC4.
+ */
+ if (idd->idd_variant == IOC4_VARIANT_PCI_RT)
+ return 0;
+
+ /* request serial registers */
+ tmp_addr1 = idd->idd_bar0 + IOC4_SERIAL_OFFSET;
+
+ if (!request_mem_region(tmp_addr1, sizeof(struct ioc4_serial),
+ "sioc4_uart")) {
+ printk(KERN_WARNING
+ "ioc4 (%p): unable to get request region for "
+ "uart space\n", (void *)idd->idd_pdev);
+ ret = -ENODEV;
+ goto out1;
+ }
+ serial = ioremap(tmp_addr1, sizeof(struct ioc4_serial));
+ if (!serial) {
+ printk(KERN_WARNING
+ "ioc4 (%p) : unable to remap ioc4 serial register\n",
+ (void *)idd->idd_pdev);
+ ret = -ENODEV;
+ goto out2;
+ }
+ DPRINT_CONFIG(("%s : mem 0x%p, serial 0x%p\n",
+ __func__, (void *)idd->idd_misc_regs,
+ (void *)serial));
+
+ /* Get memory for the new card */
+ control = kzalloc(sizeof(struct ioc4_control), GFP_KERNEL);
+
+ if (!control) {
+ printk(KERN_WARNING "ioc4_attach_one"
+ ": unable to get memory for the IOC4\n");
+ ret = -ENOMEM;
+ goto out2;
+ }
+ idd->idd_serial_data = control;
+
+ /* Allocate the soft structure */
+ soft = kzalloc(sizeof(struct ioc4_soft), GFP_KERNEL);
+ if (!soft) {
+ printk(KERN_WARNING
+ "ioc4 (%p): unable to get memory for the soft struct\n",
+ (void *)idd->idd_pdev);
+ ret = -ENOMEM;
+ goto out3;
+ }
+
+ spin_lock_init(&soft->is_ir_lock);
+ soft->is_ioc4_misc_addr = idd->idd_misc_regs;
+ soft->is_ioc4_serial_addr = serial;
+
+ /* Init the IOC4 */
+ writel(0xf << IOC4_SIO_CR_CMD_PULSE_SHIFT,
+ &idd->idd_misc_regs->sio_cr.raw);
+
+ /* Enable serial port mode select generic PIO pins as outputs */
+ writel(IOC4_GPCR_UART0_MODESEL | IOC4_GPCR_UART1_MODESEL
+ | IOC4_GPCR_UART2_MODESEL | IOC4_GPCR_UART3_MODESEL,
+ &idd->idd_misc_regs->gpcr_s.raw);
+
+ /* Clear and disable all serial interrupts */
+ write_ireg(soft, ~0, IOC4_W_IEC, IOC4_SIO_INTR_TYPE);
+ writel(~0, &idd->idd_misc_regs->sio_ir.raw);
+ write_ireg(soft, IOC4_OTHER_IR_SER_MEMERR, IOC4_W_IEC,
+ IOC4_OTHER_INTR_TYPE);
+ writel(IOC4_OTHER_IR_SER_MEMERR, &idd->idd_misc_regs->other_ir.raw);
+ control->ic_soft = soft;
+
+ /* Hook up interrupt handler */
+ if (!request_irq(idd->idd_pdev->irq, ioc4_intr, IRQF_SHARED,
+ "sgi-ioc4serial", soft)) {
+ control->ic_irq = idd->idd_pdev->irq;
+ } else {
+ printk(KERN_WARNING
+ "%s : request_irq fails for IRQ 0x%x\n ",
+ __func__, idd->idd_pdev->irq);
+ }
+ ret = ioc4_attach_local(idd);
+ if (ret)
+ goto out4;
+
+ /* register port with the serial core - 1 rs232, 1 rs422 */
+
+ if ((ret = ioc4_serial_core_attach(idd->idd_pdev, PROTO_RS232)))
+ goto out4;
+
+ if ((ret = ioc4_serial_core_attach(idd->idd_pdev, PROTO_RS422)))
+ goto out5;
+
+ Num_of_ioc4_cards++;
+
+ return ret;
+
+ /* error exits that give back resources */
+out5:
+ ioc4_serial_remove_one(idd);
+out4:
+ kfree(soft);
+out3:
+ kfree(control);
+out2:
+ if (serial)
+ iounmap(serial);
+ release_mem_region(tmp_addr1, sizeof(struct ioc4_serial));
+out1:
+
+ return ret;
+}
+
+
+static struct ioc4_submodule ioc4_serial_submodule = {
+ .is_name = "IOC4_serial",
+ .is_owner = THIS_MODULE,
+ .is_probe = ioc4_serial_attach_one,
+ .is_remove = ioc4_serial_remove_one,
+};
+
+/**
+ * ioc4_serial_init - module init
+ */
+static int __init ioc4_serial_init(void)
+{
+ int ret;
+
+ /* register with serial core */
+ if ((ret = uart_register_driver(&ioc4_uart_rs232)) < 0) {
+ printk(KERN_WARNING
+ "%s: Couldn't register rs232 IOC4 serial driver\n",
+ __func__);
+ goto out;
+ }
+ if ((ret = uart_register_driver(&ioc4_uart_rs422)) < 0) {
+ printk(KERN_WARNING
+ "%s: Couldn't register rs422 IOC4 serial driver\n",
+ __func__);
+ goto out_uart_rs232;
+ }
+
+ /* register with IOC4 main module */
+ ret = ioc4_register_submodule(&ioc4_serial_submodule);
+ if (ret)
+ goto out_uart_rs422;
+ return 0;
+
+out_uart_rs422:
+ uart_unregister_driver(&ioc4_uart_rs422);
+out_uart_rs232:
+ uart_unregister_driver(&ioc4_uart_rs232);
+out:
+ return ret;
+}
+
+static void __exit ioc4_serial_exit(void)
+{
+ ioc4_unregister_submodule(&ioc4_serial_submodule);
+ uart_unregister_driver(&ioc4_uart_rs232);
+ uart_unregister_driver(&ioc4_uart_rs422);
+}
+
+late_initcall(ioc4_serial_init); /* Call only after tty init is done */
+module_exit(ioc4_serial_exit);
+
+MODULE_AUTHOR("Pat Gefre - Silicon Graphics Inc. (SGI) <pfg@sgi.com>");
+MODULE_DESCRIPTION("Serial PCI driver module for SGI IOC4 Base-IO Card");
+MODULE_LICENSE("GPL");