diff options
Diffstat (limited to 'drivers/usb/dwc2/gadget.c')
| -rw-r--r-- | drivers/usb/dwc2/gadget.c | 180 |
1 files changed, 1 insertions, 179 deletions
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index a8db29e54320..dc0faee031fb 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -37,175 +37,7 @@ #include <linux/usb/phy.h> #include <linux/platform_data/s3c-hsotg.h> -#include "hw.h" - -static const char * const s3c_hsotg_supply_names[] = { - "vusb_d", /* digital USB supply, 1.2V */ - "vusb_a", /* analog USB supply, 1.1V */ -}; - -/* - * EP0_MPS_LIMIT - * - * Unfortunately there seems to be a limit of the amount of data that can - * be transferred by IN transactions on EP0. This is either 127 bytes or 3 - * packets (which practically means 1 packet and 63 bytes of data) when the - * MPS is set to 64. - * - * This means if we are wanting to move >127 bytes of data, we need to - * split the transactions up, but just doing one packet at a time does - * not work (this may be an implicit DATA0 PID on first packet of the - * transaction) and doing 2 packets is outside the controller's limits. - * - * If we try to lower the MPS size for EP0, then no transfers work properly - * for EP0, and the system will fail basic enumeration. As no cause for this - * has currently been found, we cannot support any large IN transfers for - * EP0. - */ -#define EP0_MPS_LIMIT 64 - -struct s3c_hsotg; -struct s3c_hsotg_req; - -/** - * struct s3c_hsotg_ep - driver endpoint definition. - * @ep: The gadget layer representation of the endpoint. - * @name: The driver generated name for the endpoint. - * @queue: Queue of requests for this endpoint. - * @parent: Reference back to the parent device structure. - * @req: The current request that the endpoint is processing. This is - * used to indicate an request has been loaded onto the endpoint - * and has yet to be completed (maybe due to data move, or simply - * awaiting an ack from the core all the data has been completed). - * @debugfs: File entry for debugfs file for this endpoint. - * @lock: State lock to protect contents of endpoint. - * @dir_in: Set to true if this endpoint is of the IN direction, which - * means that it is sending data to the Host. - * @index: The index for the endpoint registers. - * @mc: Multi Count - number of transactions per microframe - * @interval - Interval for periodic endpoints - * @name: The name array passed to the USB core. - * @halted: Set if the endpoint has been halted. - * @periodic: Set if this is a periodic ep, such as Interrupt - * @isochronous: Set if this is a isochronous ep - * @sent_zlp: Set if we've sent a zero-length packet. - * @total_data: The total number of data bytes done. - * @fifo_size: The size of the FIFO (for periodic IN endpoints) - * @fifo_load: The amount of data loaded into the FIFO (periodic IN) - * @last_load: The offset of data for the last start of request. - * @size_loaded: The last loaded size for DxEPTSIZE for periodic IN - * - * This is the driver's state for each registered enpoint, allowing it - * to keep track of transactions that need doing. Each endpoint has a - * lock to protect the state, to try and avoid using an overall lock - * for the host controller as much as possible. - * - * For periodic IN endpoints, we have fifo_size and fifo_load to try - * and keep track of the amount of data in the periodic FIFO for each - * of these as we don't have a status register that tells us how much - * is in each of them. (note, this may actually be useless information - * as in shared-fifo mode periodic in acts like a single-frame packet - * buffer than a fifo) - */ -struct s3c_hsotg_ep { - struct usb_ep ep; - struct list_head queue; - struct s3c_hsotg *parent; - struct s3c_hsotg_req *req; - struct dentry *debugfs; - - - unsigned long total_data; - unsigned int size_loaded; - unsigned int last_load; - unsigned int fifo_load; - unsigned short fifo_size; - - unsigned char dir_in; - unsigned char index; - unsigned char mc; - unsigned char interval; - - unsigned int halted:1; - unsigned int periodic:1; - unsigned int isochronous:1; - unsigned int sent_zlp:1; - - char name[10]; -}; - -/** - * struct s3c_hsotg - driver state. - * @dev: The parent device supplied to the probe function - * @driver: USB gadget driver - * @phy: The otg phy transceiver structure for phy control. - * @uphy: The otg phy transceiver structure for old USB phy control. - * @plat: The platform specific configuration data. This can be removed once - * all SoCs support usb transceiver. - * @regs: The memory area mapped for accessing registers. - * @irq: The IRQ number we are using - * @supplies: Definition of USB power supplies - * @phyif: PHY interface width - * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos. - * @num_of_eps: Number of available EPs (excluding EP0) - * @debug_root: root directrory for debugfs. - * @debug_file: main status file for debugfs. - * @debug_fifo: FIFO status file for debugfs. - * @ep0_reply: Request used for ep0 reply. - * @ep0_buff: Buffer for EP0 reply data, if needed. - * @ctrl_buff: Buffer for EP0 control requests. - * @ctrl_req: Request for EP0 control packets. - * @setup: NAK management for EP0 SETUP - * @last_rst: Time of last reset - * @eps: The endpoints being supplied to the gadget framework - */ -struct s3c_hsotg { - struct device *dev; - struct usb_gadget_driver *driver; - struct phy *phy; - struct usb_phy *uphy; - struct s3c_hsotg_plat *plat; - - spinlock_t lock; - - void __iomem *regs; - int irq; - struct clk *clk; - - struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsotg_supply_names)]; - - u32 phyif; - unsigned int dedicated_fifos:1; - unsigned char num_of_eps; - - struct dentry *debug_root; - struct dentry *debug_file; - struct dentry *debug_fifo; - - struct usb_request *ep0_reply; - struct usb_request *ctrl_req; - u8 ep0_buff[8]; - u8 ctrl_buff[8]; - - struct usb_gadget gadget; - unsigned int setup; - unsigned long last_rst; - struct s3c_hsotg_ep *eps; -}; - -/** - * struct s3c_hsotg_req - data transfer request - * @req: The USB gadget request - * @queue: The list of requests for the endpoint this is queued for. - * @in_progress: Has already had size/packets written to core - * @mapped: DMA buffer for this request has been mapped via dma_map_single(). - */ -struct s3c_hsotg_req { - struct usb_request req; - struct list_head queue; - unsigned char in_progress; - unsigned char mapped; -}; +#include "core.h" /* conversion functions */ static inline struct s3c_hsotg_req *our_req(struct usb_request *req) @@ -2166,16 +1998,6 @@ static void kill_all_requests(struct s3c_hsotg *hsotg, s3c_hsotg_txfifo_flush(hsotg, ep->index); } -#define call_gadget(_hs, _entry) \ -do { \ - if ((_hs)->gadget.speed != USB_SPEED_UNKNOWN && \ - (_hs)->driver && (_hs)->driver->_entry) { \ - spin_unlock(&_hs->lock); \ - (_hs)->driver->_entry(&(_hs)->gadget); \ - spin_lock(&_hs->lock); \ - } \ -} while (0) - /** * s3c_hsotg_disconnect - disconnect service * @hsotg: The device state. |