summaryrefslogtreecommitdiffstats
path: root/drivers/usb/gadget/pxa27x_udc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/gadget/pxa27x_udc.c')
-rw-r--r--drivers/usb/gadget/pxa27x_udc.c71
1 files changed, 53 insertions, 18 deletions
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 8cc676ecbb23..1937d8c7b433 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -38,7 +38,6 @@
#include <linux/usb.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
-#include <mach/pxa2xx-regs.h> /* FIXME: for PSSR */
#include <mach/udc.h>
#include "pxa27x_udc.h"
@@ -474,6 +473,23 @@ static inline void udc_clear_mask_UDCCR(struct pxa_udc *udc, int mask)
}
/**
+ * ep_write_UDCCSR - set bits in UDCCSR
+ * @udc: udc device
+ * @mask: bits to set in UDCCR
+ *
+ * Sets bits in UDCCSR (UDCCSR0 and UDCCSR*).
+ *
+ * A specific case is applied to ep0 : the ACM bit is always set to 1, for
+ * SET_INTERFACE and SET_CONFIGURATION.
+ */
+static inline void ep_write_UDCCSR(struct pxa_ep *ep, int mask)
+{
+ if (is_ep0(ep))
+ mask |= UDCCSR0_ACM;
+ udc_ep_writel(ep, UDCCSR, mask);
+}
+
+/**
* ep_count_bytes_remain - get how many bytes in udc endpoint
* @ep: udc endpoint
*
@@ -861,7 +877,7 @@ static int read_packet(struct pxa_ep *ep, struct pxa27x_request *req)
*buf++ = udc_ep_readl(ep, UDCDR);
req->req.actual += count;
- udc_ep_writel(ep, UDCCSR, UDCCSR_PC);
+ ep_write_UDCCSR(ep, UDCCSR_PC);
return count;
}
@@ -969,12 +985,12 @@ static int write_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
if (udccsr & UDCCSR_PC) {
ep_vdbg(ep, "Clearing Transmit Complete, udccsr=%x\n",
udccsr);
- udc_ep_writel(ep, UDCCSR, UDCCSR_PC);
+ ep_write_UDCCSR(ep, UDCCSR_PC);
}
if (udccsr & UDCCSR_TRN) {
ep_vdbg(ep, "Clearing Underrun on, udccsr=%x\n",
udccsr);
- udc_ep_writel(ep, UDCCSR, UDCCSR_TRN);
+ ep_write_UDCCSR(ep, UDCCSR_TRN);
}
count = write_packet(ep, req, max);
@@ -996,7 +1012,7 @@ static int write_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
}
if (is_short)
- udc_ep_writel(ep, UDCCSR, UDCCSR_SP);
+ ep_write_UDCCSR(ep, UDCCSR_SP);
/* requests complete when all IN data is in the FIFO */
if (is_last) {
@@ -1029,7 +1045,7 @@ static int read_ep0_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
while (epout_has_pkt(ep)) {
count = read_packet(ep, req);
- udc_ep_writel(ep, UDCCSR, UDCCSR0_OPC);
+ ep_write_UDCCSR(ep, UDCCSR0_OPC);
inc_ep_stats_bytes(ep, count, !USB_DIR_IN);
is_short = (count < ep->fifo_size);
@@ -1074,7 +1090,7 @@ static int write_ep0_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
/* Sends either a short packet or a 0 length packet */
if (unlikely(is_short))
- udc_ep_writel(ep, UDCCSR, UDCCSR0_IPR);
+ ep_write_UDCCSR(ep, UDCCSR0_IPR);
ep_dbg(ep, "in %d bytes%s%s, %d left, req=%p, udccsr0=0x%03x\n",
count, is_short ? "/S" : "", is_last ? "/L" : "",
@@ -1277,7 +1293,7 @@ static int pxa_ep_set_halt(struct usb_ep *_ep, int value)
/* FST, FEF bits are the same for control and non control endpoints */
rc = 0;
- udc_ep_writel(ep, UDCCSR, UDCCSR_FST | UDCCSR_FEF);
+ ep_write_UDCCSR(ep, UDCCSR_FST | UDCCSR_FEF);
if (is_ep0(ep))
set_ep0state(ep->dev, STALL);
@@ -1343,7 +1359,7 @@ static void pxa_ep_fifo_flush(struct usb_ep *_ep)
udc_ep_readl(ep, UDCDR);
} else {
/* most IN status is the same, but ISO can't stall */
- udc_ep_writel(ep, UDCCSR,
+ ep_write_UDCCSR(ep,
UDCCSR_PC | UDCCSR_FEF | UDCCSR_TRN
| (EPXFERTYPE_is_ISO(ep) ? 0 : UDCCSR_SST));
}
@@ -1728,6 +1744,7 @@ static void udc_enable(struct pxa_udc *udc)
memset(&udc->stats, 0, sizeof(udc->stats));
udc_set_mask_UDCCR(udc, UDCCR_UDE);
+ ep_write_UDCCSR(&udc->pxa_ep[0], UDCCSR0_ACM);
udelay(2);
if (udc_readl(udc, UDCCR) & UDCCR_EMCE)
dev_err(udc->dev, "Configuration errors, udc disabled\n");
@@ -1893,6 +1910,15 @@ static void handle_ep0_ctrl_req(struct pxa_udc *udc,
nuke(ep, -EPROTO);
+ /*
+ * In the PXA320 manual, in the section about Back-to-Back setup
+ * packets, it describes this situation. The solution is to set OPC to
+ * get rid of the status packet, and then continue with the setup
+ * packet. Generalize to pxa27x CPUs.
+ */
+ if (epout_has_pkt(ep) && (ep_count_bytes_remain(ep) == 0))
+ ep_write_UDCCSR(ep, UDCCSR0_OPC);
+
/* read SETUP packet */
for (i = 0; i < 2; i++) {
if (unlikely(ep_is_empty(ep)))
@@ -1919,7 +1945,7 @@ static void handle_ep0_ctrl_req(struct pxa_udc *udc,
set_ep0state(udc, OUT_DATA_STAGE);
/* Tell UDC to enter Data Stage */
- udc_ep_writel(ep, UDCCSR, UDCCSR0_SA | UDCCSR0_OPC);
+ ep_write_UDCCSR(ep, UDCCSR0_SA | UDCCSR0_OPC);
i = udc->driver->setup(&udc->gadget, &u.r);
if (i < 0)
@@ -1929,7 +1955,7 @@ out:
stall:
ep_dbg(ep, "protocol STALL, udccsr0=%03x err %d\n",
udc_ep_readl(ep, UDCCSR), i);
- udc_ep_writel(ep, UDCCSR, UDCCSR0_FST | UDCCSR0_FTF);
+ ep_write_UDCCSR(ep, UDCCSR0_FST | UDCCSR0_FTF);
set_ep0state(udc, STALL);
goto out;
}
@@ -1966,6 +1992,8 @@ stall:
* cleared by software.
* - clearing UDCCSR0_OPC always flushes ep0. If in setup stage, never do it
* before reading ep0.
+ * This is true only for PXA27x. This is not true anymore for PXA3xx family
+ * (check Back-to-Back setup packet in developers guide).
* - irq can be called on a "packet complete" event (opc_irq=1), while
* UDCCSR0_OPC is not yet raised (delta can be as big as 100ms
* from experimentation).
@@ -1998,7 +2026,7 @@ static void handle_ep0(struct pxa_udc *udc, int fifo_irq, int opc_irq)
if (udccsr0 & UDCCSR0_SST) {
ep_dbg(ep, "clearing stall status\n");
nuke(ep, -EPIPE);
- udc_ep_writel(ep, UDCCSR, UDCCSR0_SST);
+ ep_write_UDCCSR(ep, UDCCSR0_SST);
ep0_idle(udc);
}
@@ -2023,7 +2051,7 @@ static void handle_ep0(struct pxa_udc *udc, int fifo_irq, int opc_irq)
break;
case IN_DATA_STAGE: /* GET_DESCRIPTOR */
if (epout_has_pkt(ep))
- udc_ep_writel(ep, UDCCSR, UDCCSR0_OPC);
+ ep_write_UDCCSR(ep, UDCCSR0_OPC);
if (req && !ep_is_full(ep))
completed = write_ep0_fifo(ep, req);
if (completed)
@@ -2036,7 +2064,7 @@ static void handle_ep0(struct pxa_udc *udc, int fifo_irq, int opc_irq)
ep0_end_out_req(ep, req);
break;
case STALL:
- udc_ep_writel(ep, UDCCSR, UDCCSR0_FST);
+ ep_write_UDCCSR(ep, UDCCSR0_FST);
break;
case IN_STATUS_STAGE:
/*
@@ -2131,6 +2159,7 @@ static void pxa27x_change_configuration(struct pxa_udc *udc, int config)
set_ep0state(udc, WAIT_ACK_SET_CONF_INTERF);
udc->driver->setup(&udc->gadget, &req);
+ ep_write_UDCCSR(&udc->pxa_ep[0], UDCCSR0_AREN);
}
/**
@@ -2159,6 +2188,7 @@ static void pxa27x_change_interface(struct pxa_udc *udc, int iface, int alt)
set_ep0state(udc, WAIT_ACK_SET_CONF_INTERF);
udc->driver->setup(&udc->gadget, &req);
+ ep_write_UDCCSR(&udc->pxa_ep[0], UDCCSR0_AREN);
}
/*
@@ -2280,7 +2310,7 @@ static void irq_udc_reset(struct pxa_udc *udc)
memset(&udc->stats, 0, sizeof udc->stats);
nuke(ep, -EPROTO);
- udc_ep_writel(ep, UDCCSR, UDCCSR0_FTF | UDCCSR0_OPC);
+ ep_write_UDCCSR(ep, UDCCSR0_FTF | UDCCSR0_OPC);
ep0_idle(udc);
}
@@ -2479,6 +2509,12 @@ static void pxa_udc_shutdown(struct platform_device *_dev)
udc_disable(udc);
}
+#ifdef CONFIG_CPU_PXA27x
+extern void pxa27x_clear_otgph(void);
+#else
+#define pxa27x_clear_otgph() do {} while (0)
+#endif
+
#ifdef CONFIG_PM
/**
* pxa_udc_suspend - Suspend udc device
@@ -2546,8 +2582,7 @@ static int pxa_udc_resume(struct platform_device *_dev)
* Software must configure the USB OTG pad, UDC, and UHC
* to the state they were in before entering sleep mode.
*/
- if (cpu_is_pxa27x())
- PSSR |= PSSR_OTGPH;
+ pxa27x_clear_otgph();
return 0;
}
@@ -2571,7 +2606,7 @@ static struct platform_driver udc_driver = {
static int __init udc_init(void)
{
- if (!cpu_is_pxa27x())
+ if (!cpu_is_pxa27x() && !cpu_is_pxa3xx())
return -ENODEV;
printk(KERN_INFO "%s: version %s\n", driver_name, DRIVER_VERSION);