summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/alchemy-common.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/alchemy-common.c')
-rw-r--r--drivers/usb/host/alchemy-common.c614
1 files changed, 0 insertions, 614 deletions
diff --git a/drivers/usb/host/alchemy-common.c b/drivers/usb/host/alchemy-common.c
deleted file mode 100644
index 936af8359fb2..000000000000
--- a/drivers/usb/host/alchemy-common.c
+++ /dev/null
@@ -1,614 +0,0 @@
-/*
- * USB block power/access management abstraction.
- *
- * Au1000+: The OHCI block control register is at the far end of the OHCI memory
- * area. Au1550 has OHCI on different base address. No need to handle
- * UDC here.
- * Au1200: one register to control access and clocks to O/EHCI, UDC and OTG
- * as well as the PHY for EHCI and UDC.
- *
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/syscore_ops.h>
-#include <asm/mach-au1x00/au1000.h>
-
-/* control register offsets */
-#define AU1000_OHCICFG 0x7fffc
-#define AU1550_OHCICFG 0x07ffc
-#define AU1200_USBCFG 0x04
-
-/* Au1000 USB block config bits */
-#define USBHEN_RD (1 << 4) /* OHCI reset-done indicator */
-#define USBHEN_CE (1 << 3) /* OHCI block clock enable */
-#define USBHEN_E (1 << 2) /* OHCI block enable */
-#define USBHEN_C (1 << 1) /* OHCI block coherency bit */
-#define USBHEN_BE (1 << 0) /* OHCI Big-Endian */
-
-/* Au1200 USB config bits */
-#define USBCFG_PFEN (1 << 31) /* prefetch enable (undoc) */
-#define USBCFG_RDCOMB (1 << 30) /* read combining (undoc) */
-#define USBCFG_UNKNOWN (5 << 20) /* unknown, leave this way */
-#define USBCFG_SSD (1 << 23) /* serial short detect en */
-#define USBCFG_PPE (1 << 19) /* HS PHY PLL */
-#define USBCFG_UCE (1 << 18) /* UDC clock enable */
-#define USBCFG_ECE (1 << 17) /* EHCI clock enable */
-#define USBCFG_OCE (1 << 16) /* OHCI clock enable */
-#define USBCFG_FLA(x) (((x) & 0x3f) << 8)
-#define USBCFG_UCAM (1 << 7) /* coherent access (undoc) */
-#define USBCFG_GME (1 << 6) /* OTG mem access */
-#define USBCFG_DBE (1 << 5) /* UDC busmaster enable */
-#define USBCFG_DME (1 << 4) /* UDC mem enable */
-#define USBCFG_EBE (1 << 3) /* EHCI busmaster enable */
-#define USBCFG_EME (1 << 2) /* EHCI mem enable */
-#define USBCFG_OBE (1 << 1) /* OHCI busmaster enable */
-#define USBCFG_OME (1 << 0) /* OHCI mem enable */
-#define USBCFG_INIT_AU1200 (USBCFG_PFEN | USBCFG_RDCOMB | USBCFG_UNKNOWN |\
- USBCFG_SSD | USBCFG_FLA(0x20) | USBCFG_UCAM | \
- USBCFG_GME | USBCFG_DBE | USBCFG_DME | \
- USBCFG_EBE | USBCFG_EME | USBCFG_OBE | \
- USBCFG_OME)
-
-/* Au1300 USB config registers */
-#define USB_DWC_CTRL1 0x00
-#define USB_DWC_CTRL2 0x04
-#define USB_VBUS_TIMER 0x10
-#define USB_SBUS_CTRL 0x14
-#define USB_MSR_ERR 0x18
-#define USB_DWC_CTRL3 0x1C
-#define USB_DWC_CTRL4 0x20
-#define USB_OTG_STATUS 0x28
-#define USB_DWC_CTRL5 0x2C
-#define USB_DWC_CTRL6 0x30
-#define USB_DWC_CTRL7 0x34
-#define USB_PHY_STATUS 0xC0
-#define USB_INT_STATUS 0xC4
-#define USB_INT_ENABLE 0xC8
-
-#define USB_DWC_CTRL1_OTGD 0x04 /* set to DISable OTG */
-#define USB_DWC_CTRL1_HSTRS 0x02 /* set to ENable EHCI */
-#define USB_DWC_CTRL1_DCRS 0x01 /* set to ENable UDC */
-
-#define USB_DWC_CTRL2_PHY1RS 0x04 /* set to enable PHY1 */
-#define USB_DWC_CTRL2_PHY0RS 0x02 /* set to enable PHY0 */
-#define USB_DWC_CTRL2_PHYRS 0x01 /* set to enable PHY */
-
-#define USB_DWC_CTRL3_OHCI1_CKEN (1 << 19)
-#define USB_DWC_CTRL3_OHCI0_CKEN (1 << 18)
-#define USB_DWC_CTRL3_EHCI0_CKEN (1 << 17)
-#define USB_DWC_CTRL3_OTG0_CKEN (1 << 16)
-
-#define USB_SBUS_CTRL_SBCA 0x04 /* coherent access */
-
-#define USB_INTEN_FORCE 0x20
-#define USB_INTEN_PHY 0x10
-#define USB_INTEN_UDC 0x08
-#define USB_INTEN_EHCI 0x04
-#define USB_INTEN_OHCI1 0x02
-#define USB_INTEN_OHCI0 0x01
-
-static DEFINE_SPINLOCK(alchemy_usb_lock);
-
-static inline void __au1300_usb_phyctl(void __iomem *base, int enable)
-{
- unsigned long r, s;
-
- r = __raw_readl(base + USB_DWC_CTRL2);
- s = __raw_readl(base + USB_DWC_CTRL3);
-
- s &= USB_DWC_CTRL3_OHCI1_CKEN | USB_DWC_CTRL3_OHCI0_CKEN |
- USB_DWC_CTRL3_EHCI0_CKEN | USB_DWC_CTRL3_OTG0_CKEN;
-
- if (enable) {
- /* simply enable all PHYs */
- r |= USB_DWC_CTRL2_PHY1RS | USB_DWC_CTRL2_PHY0RS |
- USB_DWC_CTRL2_PHYRS;
- __raw_writel(r, base + USB_DWC_CTRL2);
- wmb();
- } else if (!s) {
- /* no USB block active, do disable all PHYs */
- r &= ~(USB_DWC_CTRL2_PHY1RS | USB_DWC_CTRL2_PHY0RS |
- USB_DWC_CTRL2_PHYRS);
- __raw_writel(r, base + USB_DWC_CTRL2);
- wmb();
- }
-}
-
-static inline void __au1300_ohci_control(void __iomem *base, int enable, int id)
-{
- unsigned long r;
-
- if (enable) {
- __raw_writel(1, base + USB_DWC_CTRL7); /* start OHCI clock */
- wmb();
-
- r = __raw_readl(base + USB_DWC_CTRL3); /* enable OHCI block */
- r |= (id == 0) ? USB_DWC_CTRL3_OHCI0_CKEN
- : USB_DWC_CTRL3_OHCI1_CKEN;
- __raw_writel(r, base + USB_DWC_CTRL3);
- wmb();
-
- __au1300_usb_phyctl(base, enable); /* power up the PHYs */
-
- r = __raw_readl(base + USB_INT_ENABLE);
- r |= (id == 0) ? USB_INTEN_OHCI0 : USB_INTEN_OHCI1;
- __raw_writel(r, base + USB_INT_ENABLE);
- wmb();
-
- /* reset the OHCI start clock bit */
- __raw_writel(0, base + USB_DWC_CTRL7);
- wmb();
- } else {
- r = __raw_readl(base + USB_INT_ENABLE);
- r &= ~((id == 0) ? USB_INTEN_OHCI0 : USB_INTEN_OHCI1);
- __raw_writel(r, base + USB_INT_ENABLE);
- wmb();
-
- r = __raw_readl(base + USB_DWC_CTRL3);
- r &= ~((id == 0) ? USB_DWC_CTRL3_OHCI0_CKEN
- : USB_DWC_CTRL3_OHCI1_CKEN);
- __raw_writel(r, base + USB_DWC_CTRL3);
- wmb();
-
- __au1300_usb_phyctl(base, enable);
- }
-}
-
-static inline void __au1300_ehci_control(void __iomem *base, int enable)
-{
- unsigned long r;
-
- if (enable) {
- r = __raw_readl(base + USB_DWC_CTRL3);
- r |= USB_DWC_CTRL3_EHCI0_CKEN;
- __raw_writel(r, base + USB_DWC_CTRL3);
- wmb();
-
- r = __raw_readl(base + USB_DWC_CTRL1);
- r |= USB_DWC_CTRL1_HSTRS;
- __raw_writel(r, base + USB_DWC_CTRL1);
- wmb();
-
- __au1300_usb_phyctl(base, enable);
-
- r = __raw_readl(base + USB_INT_ENABLE);
- r |= USB_INTEN_EHCI;
- __raw_writel(r, base + USB_INT_ENABLE);
- wmb();
- } else {
- r = __raw_readl(base + USB_INT_ENABLE);
- r &= ~USB_INTEN_EHCI;
- __raw_writel(r, base + USB_INT_ENABLE);
- wmb();
-
- r = __raw_readl(base + USB_DWC_CTRL1);
- r &= ~USB_DWC_CTRL1_HSTRS;
- __raw_writel(r, base + USB_DWC_CTRL1);
- wmb();
-
- r = __raw_readl(base + USB_DWC_CTRL3);
- r &= ~USB_DWC_CTRL3_EHCI0_CKEN;
- __raw_writel(r, base + USB_DWC_CTRL3);
- wmb();
-
- __au1300_usb_phyctl(base, enable);
- }
-}
-
-static inline void __au1300_udc_control(void __iomem *base, int enable)
-{
- unsigned long r;
-
- if (enable) {
- r = __raw_readl(base + USB_DWC_CTRL1);
- r |= USB_DWC_CTRL1_DCRS;
- __raw_writel(r, base + USB_DWC_CTRL1);
- wmb();
-
- __au1300_usb_phyctl(base, enable);
-
- r = __raw_readl(base + USB_INT_ENABLE);
- r |= USB_INTEN_UDC;
- __raw_writel(r, base + USB_INT_ENABLE);
- wmb();
- } else {
- r = __raw_readl(base + USB_INT_ENABLE);
- r &= ~USB_INTEN_UDC;
- __raw_writel(r, base + USB_INT_ENABLE);
- wmb();
-
- r = __raw_readl(base + USB_DWC_CTRL1);
- r &= ~USB_DWC_CTRL1_DCRS;
- __raw_writel(r, base + USB_DWC_CTRL1);
- wmb();
-
- __au1300_usb_phyctl(base, enable);
- }
-}
-
-static inline void __au1300_otg_control(void __iomem *base, int enable)
-{
- unsigned long r;
- if (enable) {
- r = __raw_readl(base + USB_DWC_CTRL3);
- r |= USB_DWC_CTRL3_OTG0_CKEN;
- __raw_writel(r, base + USB_DWC_CTRL3);
- wmb();
-
- r = __raw_readl(base + USB_DWC_CTRL1);
- r &= ~USB_DWC_CTRL1_OTGD;
- __raw_writel(r, base + USB_DWC_CTRL1);
- wmb();
-
- __au1300_usb_phyctl(base, enable);
- } else {
- r = __raw_readl(base + USB_DWC_CTRL1);
- r |= USB_DWC_CTRL1_OTGD;
- __raw_writel(r, base + USB_DWC_CTRL1);
- wmb();
-
- r = __raw_readl(base + USB_DWC_CTRL3);
- r &= ~USB_DWC_CTRL3_OTG0_CKEN;
- __raw_writel(r, base + USB_DWC_CTRL3);
- wmb();
-
- __au1300_usb_phyctl(base, enable);
- }
-}
-
-static inline int au1300_usb_control(int block, int enable)
-{
- void __iomem *base =
- (void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR);
- int ret = 0;
-
- switch (block) {
- case ALCHEMY_USB_OHCI0:
- __au1300_ohci_control(base, enable, 0);
- break;
- case ALCHEMY_USB_OHCI1:
- __au1300_ohci_control(base, enable, 1);
- break;
- case ALCHEMY_USB_EHCI0:
- __au1300_ehci_control(base, enable);
- break;
- case ALCHEMY_USB_UDC0:
- __au1300_udc_control(base, enable);
- break;
- case ALCHEMY_USB_OTG0:
- __au1300_otg_control(base, enable);
- break;
- default:
- ret = -ENODEV;
- }
- return ret;
-}
-
-static inline void au1300_usb_init(void)
-{
- void __iomem *base =
- (void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR);
-
- /* set some sane defaults. Note: we don't fiddle with DWC_CTRL4
- * here at all: Port 2 routing (EHCI or UDC) must be set either
- * by boot firmware or platform init code; I can't autodetect
- * a sane setting.
- */
- __raw_writel(0, base + USB_INT_ENABLE); /* disable all USB irqs */
- wmb();
- __raw_writel(0, base + USB_DWC_CTRL3); /* disable all clocks */
- wmb();
- __raw_writel(~0, base + USB_MSR_ERR); /* clear all errors */
- wmb();
- __raw_writel(~0, base + USB_INT_STATUS); /* clear int status */
- wmb();
- /* set coherent access bit */
- __raw_writel(USB_SBUS_CTRL_SBCA, base + USB_SBUS_CTRL);
- wmb();
-}
-
-static inline void __au1200_ohci_control(void __iomem *base, int enable)
-{
- unsigned long r = __raw_readl(base + AU1200_USBCFG);
- if (enable) {
- __raw_writel(r | USBCFG_OCE, base + AU1200_USBCFG);
- wmb();
- udelay(2000);
- } else {
- __raw_writel(r & ~USBCFG_OCE, base + AU1200_USBCFG);
- wmb();
- udelay(1000);
- }
-}
-
-static inline void __au1200_ehci_control(void __iomem *base, int enable)
-{
- unsigned long r = __raw_readl(base + AU1200_USBCFG);
- if (enable) {
- __raw_writel(r | USBCFG_ECE | USBCFG_PPE, base + AU1200_USBCFG);
- wmb();
- udelay(1000);
- } else {
- if (!(r & USBCFG_UCE)) /* UDC also off? */
- r &= ~USBCFG_PPE; /* yes: disable HS PHY PLL */
- __raw_writel(r & ~USBCFG_ECE, base + AU1200_USBCFG);
- wmb();
- udelay(1000);
- }
-}
-
-static inline void __au1200_udc_control(void __iomem *base, int enable)
-{
- unsigned long r = __raw_readl(base + AU1200_USBCFG);
- if (enable) {
- __raw_writel(r | USBCFG_UCE | USBCFG_PPE, base + AU1200_USBCFG);
- wmb();
- } else {
- if (!(r & USBCFG_ECE)) /* EHCI also off? */
- r &= ~USBCFG_PPE; /* yes: disable HS PHY PLL */
- __raw_writel(r & ~USBCFG_UCE, base + AU1200_USBCFG);
- wmb();
- }
-}
-
-static inline int au1200_coherency_bug(void)
-{
-#if defined(CONFIG_DMA_COHERENT)
- /* Au1200 AB USB does not support coherent memory */
- if (!(read_c0_prid() & 0xff)) {
- printk(KERN_INFO "Au1200 USB: this is chip revision AB !!\n");
- printk(KERN_INFO "Au1200 USB: update your board or re-configure"
- " the kernel\n");
- return -ENODEV;
- }
-#endif
- return 0;
-}
-
-static inline int au1200_usb_control(int block, int enable)
-{
- void __iomem *base =
- (void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR);
- int ret = 0;
-
- switch (block) {
- case ALCHEMY_USB_OHCI0:
- ret = au1200_coherency_bug();
- if (ret && enable)
- goto out;
- __au1200_ohci_control(base, enable);
- break;
- case ALCHEMY_USB_UDC0:
- __au1200_udc_control(base, enable);
- break;
- case ALCHEMY_USB_EHCI0:
- ret = au1200_coherency_bug();
- if (ret && enable)
- goto out;
- __au1200_ehci_control(base, enable);
- break;
- default:
- ret = -ENODEV;
- }
-out:
- return ret;
-}
-
-
-/* initialize USB block(s) to a known working state */
-static inline void au1200_usb_init(void)
-{
- void __iomem *base =
- (void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR);
- __raw_writel(USBCFG_INIT_AU1200, base + AU1200_USBCFG);
- wmb();
- udelay(1000);
-}
-
-static inline void au1000_usb_init(unsigned long rb, int reg)
-{
- void __iomem *base = (void __iomem *)KSEG1ADDR(rb + reg);
- unsigned long r = __raw_readl(base);
-
-#if defined(__BIG_ENDIAN)
- r |= USBHEN_BE;
-#endif
- r |= USBHEN_C;
-
- __raw_writel(r, base);
- wmb();
- udelay(1000);
-}
-
-
-static inline void __au1xx0_ohci_control(int enable, unsigned long rb, int creg)
-{
- void __iomem *base = (void __iomem *)KSEG1ADDR(rb);
- unsigned long r = __raw_readl(base + creg);
-
- if (enable) {
- __raw_writel(r | USBHEN_CE, base + creg);
- wmb();
- udelay(1000);
- __raw_writel(r | USBHEN_CE | USBHEN_E, base + creg);
- wmb();
- udelay(1000);
-
- /* wait for reset complete (read reg twice: au1500 erratum) */
- while (__raw_readl(base + creg),
- !(__raw_readl(base + creg) & USBHEN_RD))
- udelay(1000);
- } else {
- __raw_writel(r & ~(USBHEN_CE | USBHEN_E), base + creg);
- wmb();
- }
-}
-
-static inline int au1000_usb_control(int block, int enable, unsigned long rb,
- int creg)
-{
- int ret = 0;
-
- switch (block) {
- case ALCHEMY_USB_OHCI0:
- __au1xx0_ohci_control(enable, rb, creg);
- break;
- default:
- ret = -ENODEV;
- }
- return ret;
-}
-
-/*
- * alchemy_usb_control - control Alchemy on-chip USB blocks
- * @block: USB block to target
- * @enable: set 1 to enable a block, 0 to disable
- */
-int alchemy_usb_control(int block, int enable)
-{
- unsigned long flags;
- int ret;
-
- spin_lock_irqsave(&alchemy_usb_lock, flags);
- switch (alchemy_get_cputype()) {
- case ALCHEMY_CPU_AU1000:
- case ALCHEMY_CPU_AU1500:
- case ALCHEMY_CPU_AU1100:
- ret = au1000_usb_control(block, enable,
- AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG);
- break;
- case ALCHEMY_CPU_AU1550:
- ret = au1000_usb_control(block, enable,
- AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG);
- break;
- case ALCHEMY_CPU_AU1200:
- ret = au1200_usb_control(block, enable);
- break;
- case ALCHEMY_CPU_AU1300:
- ret = au1300_usb_control(block, enable);
- break;
- default:
- ret = -ENODEV;
- }
- spin_unlock_irqrestore(&alchemy_usb_lock, flags);
- return ret;
-}
-EXPORT_SYMBOL_GPL(alchemy_usb_control);
-
-
-static unsigned long alchemy_usb_pmdata[2];
-
-static void au1000_usb_pm(unsigned long br, int creg, int susp)
-{
- void __iomem *base = (void __iomem *)KSEG1ADDR(br);
-
- if (susp) {
- alchemy_usb_pmdata[0] = __raw_readl(base + creg);
- /* There appears to be some undocumented reset register.... */
- __raw_writel(0, base + 0x04);
- wmb();
- __raw_writel(0, base + creg);
- wmb();
- } else {
- __raw_writel(alchemy_usb_pmdata[0], base + creg);
- wmb();
- }
-}
-
-static void au1200_usb_pm(int susp)
-{
- void __iomem *base =
- (void __iomem *)KSEG1ADDR(AU1200_USB_OTG_PHYS_ADDR);
- if (susp) {
- /* save OTG_CAP/MUX registers which indicate port routing */
- /* FIXME: write an OTG driver to do that */
- alchemy_usb_pmdata[0] = __raw_readl(base + 0x00);
- alchemy_usb_pmdata[1] = __raw_readl(base + 0x04);
- } else {
- /* restore access to all MMIO areas */
- au1200_usb_init();
-
- /* restore OTG_CAP/MUX registers */
- __raw_writel(alchemy_usb_pmdata[0], base + 0x00);
- __raw_writel(alchemy_usb_pmdata[1], base + 0x04);
- wmb();
- }
-}
-
-static void au1300_usb_pm(int susp)
-{
- void __iomem *base =
- (void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR);
- /* remember Port2 routing */
- if (susp) {
- alchemy_usb_pmdata[0] = __raw_readl(base + USB_DWC_CTRL4);
- } else {
- au1300_usb_init();
- __raw_writel(alchemy_usb_pmdata[0], base + USB_DWC_CTRL4);
- wmb();
- }
-}
-
-static void alchemy_usb_pm(int susp)
-{
- switch (alchemy_get_cputype()) {
- case ALCHEMY_CPU_AU1000:
- case ALCHEMY_CPU_AU1500:
- case ALCHEMY_CPU_AU1100:
- au1000_usb_pm(AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG, susp);
- break;
- case ALCHEMY_CPU_AU1550:
- au1000_usb_pm(AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG, susp);
- break;
- case ALCHEMY_CPU_AU1200:
- au1200_usb_pm(susp);
- break;
- case ALCHEMY_CPU_AU1300:
- au1300_usb_pm(susp);
- break;
- }
-}
-
-static int alchemy_usb_suspend(void)
-{
- alchemy_usb_pm(1);
- return 0;
-}
-
-static void alchemy_usb_resume(void)
-{
- alchemy_usb_pm(0);
-}
-
-static struct syscore_ops alchemy_usb_pm_ops = {
- .suspend = alchemy_usb_suspend,
- .resume = alchemy_usb_resume,
-};
-
-static int __init alchemy_usb_init(void)
-{
- switch (alchemy_get_cputype()) {
- case ALCHEMY_CPU_AU1000:
- case ALCHEMY_CPU_AU1500:
- case ALCHEMY_CPU_AU1100:
- au1000_usb_init(AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG);
- break;
- case ALCHEMY_CPU_AU1550:
- au1000_usb_init(AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG);
- break;
- case ALCHEMY_CPU_AU1200:
- au1200_usb_init();
- break;
- case ALCHEMY_CPU_AU1300:
- au1300_usb_init();
- break;
- }
-
- register_syscore_ops(&alchemy_usb_pm_ops);
-
- return 0;
-}
-arch_initcall(alchemy_usb_init);