summaryrefslogtreecommitdiffstats
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/class/cdc-acm.c5
-rw-r--r--drivers/usb/host/ehci-hcd.c2
-rw-r--r--drivers/usb/host/ehci-pci.c2
-rw-r--r--drivers/usb/host/ehci-ps3.c2
-rw-r--r--drivers/usb/host/ohci-at91.c4
-rw-r--r--drivers/usb/host/ohci-ps3.c2
-rw-r--r--drivers/usb/serial/pl2303.c1
-rw-r--r--drivers/usb/serial/pl2303.h4
-rw-r--r--drivers/usb/serial/symbolserial.c67
9 files changed, 15 insertions, 74 deletions
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index b3d5a23ab56f..869d47cb6db3 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1358,6 +1358,9 @@ static struct usb_device_id acm_ids[] = {
{ USB_DEVICE(0x079b, 0x000f), /* BT On-Air USB MODEM */
.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
},
+ { USB_DEVICE(0x0ace, 0x1602), /* ZyDAS 56K USB MODEM */
+ .driver_info = SINGLE_RX_URB,
+ },
{ USB_DEVICE(0x0ace, 0x1608), /* ZyDAS 56K USB MODEM */
.driver_info = SINGLE_RX_URB, /* firmware bug */
},
@@ -1493,4 +1496,4 @@ module_exit(acm_exit);
MODULE_AUTHOR( DRIVER_AUTHOR );
MODULE_DESCRIPTION( DRIVER_DESC );
MODULE_LICENSE("GPL");
-
+MODULE_ALIAS_CHARDEV_MAJOR(ACM_TTY_MAJOR);
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index f2618d17710d..c637207a1c80 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -622,7 +622,7 @@ static int ehci_run (struct usb_hcd *hcd)
ehci_writel(ehci, 0, &ehci->regs->segment);
#if 0
// this is deeply broken on almost all architectures
- if (!dma_set_mask(hcd->self.controller, DMA_64BIT_MASK))
+ if (!dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64)))
ehci_info(ehci, "enabled 64bit DMA\n");
#endif
}
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index abb9a7706ec7..5aa8bce90e1f 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -108,7 +108,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
case 0x00d8: /* CK8 */
case 0x00e8: /* CK8S */
if (pci_set_consistent_dma_mask(pdev,
- DMA_31BIT_MASK) < 0)
+ DMA_BIT_MASK(31)) < 0)
ehci_warn(ehci, "can't enable NVidia "
"workaround for >2GB RAM\n");
break;
diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c
index 9c9da35abc6c..1ba9f9a8c308 100644
--- a/drivers/usb/host/ehci-ps3.c
+++ b/drivers/usb/host/ehci-ps3.c
@@ -81,7 +81,7 @@ static int ps3_ehci_probe(struct ps3_system_bus_device *dev)
int result;
struct usb_hcd *hcd;
unsigned int virq;
- static u64 dummy_mask = DMA_32BIT_MASK;
+ static u64 dummy_mask = DMA_BIT_MASK(32);
if (usb_disabled()) {
result = -ENODEV;
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 4ed228a89943..bb5e6f671578 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -280,7 +280,7 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
* are always powered while this driver is active, and use
* active-low power switches.
*/
- for (i = 0; i < pdata->ports; i++) {
+ for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
if (pdata->vbus_pin[i] <= 0)
continue;
gpio_request(pdata->vbus_pin[i], "ohci_vbus");
@@ -298,7 +298,7 @@ static int ohci_hcd_at91_drv_remove(struct platform_device *pdev)
int i;
if (pdata) {
- for (i = 0; i < pdata->ports; i++) {
+ for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
if (pdata->vbus_pin[i] <= 0)
continue;
gpio_direction_output(pdata->vbus_pin[i], 1);
diff --git a/drivers/usb/host/ohci-ps3.c b/drivers/usb/host/ohci-ps3.c
index 3c1a3b5f89f1..3d1910317328 100644
--- a/drivers/usb/host/ohci-ps3.c
+++ b/drivers/usb/host/ohci-ps3.c
@@ -80,7 +80,7 @@ static int ps3_ohci_probe(struct ps3_system_bus_device *dev)
int result;
struct usb_hcd *hcd;
unsigned int virq;
- static u64 dummy_mask = DMA_32BIT_MASK;
+ static u64 dummy_mask = DMA_BIT_MASK(32);
if (usb_disabled()) {
result = -ENODEV;
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 1aed584be5eb..751a533a4347 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -79,6 +79,7 @@ static struct usb_device_id id_table [] = {
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65) },
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X75) },
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_EF81) },
+ { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_ID_S81) }, /* Benq/Siemens S81 */
{ USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) },
{ USB_DEVICE(NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID) },
{ USB_DEVICE(CA_42_CA42_VENDOR_ID, CA_42_CA42_PRODUCT_ID) },
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 54974f446a8c..1d7a22e3a9fd 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -7,6 +7,10 @@
* (at your option) any later version.
*
*/
+
+#define BENQ_VENDOR_ID 0x04a5
+#define BENQ_PRODUCT_ID_S81 0x4027
+
#define PL2303_VENDOR_ID 0x067b
#define PL2303_PRODUCT_ID 0x2303
#define PL2303_PRODUCT_ID_RSAQ2 0x04bb
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
index 8b3cbc87adc7..69879e437940 100644
--- a/drivers/usb/serial/symbolserial.c
+++ b/drivers/usb/serial/symbolserial.c
@@ -139,14 +139,6 @@ static int symbol_open(struct tty_struct *tty, struct usb_serial_port *port,
priv->port = port;
spin_unlock_irqrestore(&priv->lock, flags);
- /*
- * Force low_latency on so that our tty_push actually forces the data
- * through, otherwise it is scheduled, and with high data rates (like
- * with OHCI) data can get lost.
- */
- if (tty)
- tty->low_latency = 1;
-
/* Start reading from the device */
usb_fill_int_urb(priv->int_urb, priv->udev,
usb_rcvintpipe(priv->udev, priv->int_address),
@@ -205,62 +197,6 @@ static void symbol_unthrottle(struct tty_struct *tty)
__func__, result);
}
-static int symbol_ioctl(struct tty_struct *tty, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- struct usb_serial_port *port = tty->driver_data;
- struct device *dev = &port->dev;
-
- /*
- * Right now we need to figure out what commands
- * most userspace tools want to see for this driver,
- * so just log the things.
- */
- switch (cmd) {
- case TIOCSERGETLSR:
- dev_info(dev, "%s: TIOCSERGETLSR\n", __func__);
- break;
-
- case TIOCGSERIAL:
- dev_info(dev, "%s: TIOCGSERIAL\n", __func__);
- break;
-
- case TIOCMIWAIT:
- dev_info(dev, "%s: TIOCMIWAIT\n", __func__);
- break;
-
- case TIOCGICOUNT:
- dev_info(dev, "%s: TIOCGICOUNT\n", __func__);
- break;
- default:
- dev_info(dev, "%s: unknown (%d)\n", __func__, cmd);
- }
- return -ENOIOCTLCMD;
-}
-
-static int symbol_tiocmget(struct tty_struct *tty, struct file *file)
-{
- struct usb_serial_port *port = tty->driver_data;
- struct device *dev = &port->dev;
-
- /* TODO */
- /* probably just need to shadow whatever was sent to us here */
- dev_info(dev, "%s\n", __func__);
- return 0;
-}
-
-static int symbol_tiocmset(struct tty_struct *tty, struct file *file,
- unsigned int set, unsigned int clear)
-{
- struct usb_serial_port *port = tty->driver_data;
- struct device *dev = &port->dev;
-
- /* TODO */
- /* probably just need to shadow whatever was sent to us here */
- dev_info(dev, "%s\n", __func__);
- return 0;
-}
-
static int symbol_startup(struct usb_serial *serial)
{
struct symbol_private *priv;
@@ -367,9 +303,6 @@ static struct usb_serial_driver symbol_device = {
.shutdown = symbol_shutdown,
.throttle = symbol_throttle,
.unthrottle = symbol_unthrottle,
- .ioctl = symbol_ioctl,
- .tiocmget = symbol_tiocmget,
- .tiocmset = symbol_tiocmset,
};
static int __init symbol_init(void)
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-06-30 04:38:34 +0200