summaryrefslogtreecommitdiffstats
path: root/drivers/video/pvr2fb.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/video/pvr2fb.c')
-rw-r--r--drivers/video/pvr2fb.c1125
1 files changed, 1125 insertions, 0 deletions
diff --git a/drivers/video/pvr2fb.c b/drivers/video/pvr2fb.c
new file mode 100644
index 000000000000..31c547fd383b
--- /dev/null
+++ b/drivers/video/pvr2fb.c
@@ -0,0 +1,1125 @@
+/* drivers/video/pvr2fb.c
+ *
+ * Frame buffer and fbcon support for the NEC PowerVR2 found within the Sega
+ * Dreamcast.
+ *
+ * Copyright (c) 2001 M. R. Brown <mrbrown@0xd6.org>
+ * Copyright (c) 2001, 2002, 2003, 2004, 2005 Paul Mundt <lethal@linux-sh.org>
+ *
+ * This file is part of the LinuxDC project (linuxdc.sourceforge.net).
+ *
+ */
+
+/*
+ * This driver is mostly based on the excellent amifb and vfb sources. It uses
+ * an odd scheme for converting hardware values to/from framebuffer values,
+ * here are some hacked-up formulas:
+ *
+ * The Dreamcast has screen offsets from each side of its four borders and
+ * the start offsets of the display window. I used these values to calculate
+ * 'pseudo' values (think of them as placeholders) for the fb video mode, so
+ * that when it came time to convert these values back into their hardware
+ * values, I could just add mode- specific offsets to get the correct mode
+ * settings:
+ *
+ * left_margin = diwstart_h - borderstart_h;
+ * right_margin = borderstop_h - (diwstart_h + xres);
+ * upper_margin = diwstart_v - borderstart_v;
+ * lower_margin = borderstop_v - (diwstart_h + yres);
+ *
+ * hsync_len = borderstart_h + (hsync_total - borderstop_h);
+ * vsync_len = borderstart_v + (vsync_total - borderstop_v);
+ *
+ * Then, when it's time to convert back to hardware settings, the only
+ * constants are the borderstart_* offsets, all other values are derived from
+ * the fb video mode:
+ *
+ * // PAL
+ * borderstart_h = 116;
+ * borderstart_v = 44;
+ * ...
+ * borderstop_h = borderstart_h + hsync_total - hsync_len;
+ * ...
+ * diwstart_v = borderstart_v - upper_margin;
+ *
+ * However, in the current implementation, the borderstart values haven't had
+ * the benefit of being fully researched, so some modes may be broken.
+ */
+
+#undef DEBUG
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/config.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#ifdef CONFIG_SH_DREAMCAST
+#include <asm/machvec.h>
+#include <asm/mach/sysasic.h>
+#endif
+
+#ifdef CONFIG_SH_DMA
+#include <linux/pagemap.h>
+#include <asm/mach/dma.h>
+#include <asm/dma.h>
+#endif
+
+#ifdef CONFIG_SH_STORE_QUEUES
+#include <asm/uaccess.h>
+#include <asm/cpu/sq.h>
+#endif
+
+#ifndef PCI_DEVICE_ID_NEC_NEON250
+# define PCI_DEVICE_ID_NEC_NEON250 0x0067
+#endif
+
+/* 2D video registers */
+#define DISP_BASE par->mmio_base
+#define DISP_BRDRCOLR (DISP_BASE + 0x40)
+#define DISP_DIWMODE (DISP_BASE + 0x44)
+#define DISP_DIWADDRL (DISP_BASE + 0x50)
+#define DISP_DIWADDRS (DISP_BASE + 0x54)
+#define DISP_DIWSIZE (DISP_BASE + 0x5c)
+#define DISP_SYNCCONF (DISP_BASE + 0xd0)
+#define DISP_BRDRHORZ (DISP_BASE + 0xd4)
+#define DISP_SYNCSIZE (DISP_BASE + 0xd8)
+#define DISP_BRDRVERT (DISP_BASE + 0xdc)
+#define DISP_DIWCONF (DISP_BASE + 0xe8)
+#define DISP_DIWHSTRT (DISP_BASE + 0xec)
+#define DISP_DIWVSTRT (DISP_BASE + 0xf0)
+
+/* Pixel clocks, one for TV output, doubled for VGA output */
+#define TV_CLK 74239
+#define VGA_CLK 37119
+
+/* This is for 60Hz - the VTOTAL is doubled for interlaced modes */
+#define PAL_HTOTAL 863
+#define PAL_VTOTAL 312
+#define NTSC_HTOTAL 857
+#define NTSC_VTOTAL 262
+
+/* Supported cable types */
+enum { CT_VGA, CT_NONE, CT_RGB, CT_COMPOSITE };
+
+/* Supported video output types */
+enum { VO_PAL, VO_NTSC, VO_VGA };
+
+/* Supported palette types */
+enum { PAL_ARGB1555, PAL_RGB565, PAL_ARGB4444, PAL_ARGB8888 };
+
+struct pvr2_params { unsigned int val; char *name; };
+static struct pvr2_params cables[] __initdata = {
+ { CT_VGA, "VGA" }, { CT_RGB, "RGB" }, { CT_COMPOSITE, "COMPOSITE" },
+};
+
+static struct pvr2_params outputs[] __initdata = {
+ { VO_PAL, "PAL" }, { VO_NTSC, "NTSC" }, { VO_VGA, "VGA" },
+};
+
+/*
+ * This describes the current video mode
+ */
+
+static struct pvr2fb_par {
+ unsigned int hsync_total; /* Clocks/line */
+ unsigned int vsync_total; /* Lines/field */
+ unsigned int borderstart_h;
+ unsigned int borderstop_h;
+ unsigned int borderstart_v;
+ unsigned int borderstop_v;
+ unsigned int diwstart_h; /* Horizontal offset of the display field */
+ unsigned int diwstart_v; /* Vertical offset of the display field, for
+ interlaced modes, this is the long field */
+ unsigned long disp_start; /* Address of image within VRAM */
+ unsigned char is_interlaced; /* Is the display interlaced? */
+ unsigned char is_doublescan; /* Are scanlines output twice? (doublescan) */
+ unsigned char is_lowres; /* Is horizontal pixel-doubling enabled? */
+
+ unsigned long mmio_base; /* MMIO base */
+} *currentpar;
+
+static struct fb_info *fb_info;
+
+static struct fb_fix_screeninfo pvr2_fix __initdata = {
+ .id = "NEC PowerVR2",
+ .type = FB_TYPE_PACKED_PIXELS,
+ .visual = FB_VISUAL_TRUECOLOR,
+ .ypanstep = 1,
+ .ywrapstep = 1,
+ .accel = FB_ACCEL_NONE,
+};
+
+static struct fb_var_screeninfo pvr2_var __initdata = {
+ .xres = 640,
+ .yres = 480,
+ .xres_virtual = 640,
+ .yres_virtual = 480,
+ .bits_per_pixel =16,
+ .red = { 11, 5, 0 },
+ .green = { 5, 6, 0 },
+ .blue = { 0, 5, 0 },
+ .activate = FB_ACTIVATE_NOW,
+ .height = -1,
+ .width = -1,
+ .vmode = FB_VMODE_NONINTERLACED,
+};
+
+static int cable_type = CT_VGA;
+static int video_output = VO_VGA;
+
+static int nopan = 0;
+static int nowrap = 1;
+
+/*
+ * We do all updating, blanking, etc. during the vertical retrace period
+ */
+static unsigned int do_vmode_full = 0; /* Change the video mode */
+static unsigned int do_vmode_pan = 0; /* Update the video mode */
+static short do_blank = 0; /* (Un)Blank the screen */
+
+static unsigned int is_blanked = 0; /* Is the screen blanked? */
+
+#ifdef CONFIG_SH_STORE_QUEUES
+static struct sq_mapping *pvr2fb_map;
+#endif
+
+#ifdef CONFIG_SH_DMA
+static unsigned int shdma = PVR2_CASCADE_CHAN;
+static unsigned int pvr2dma = ONCHIP_NR_DMA_CHANNELS;
+#endif
+
+/* Interface used by the world */
+
+int pvr2fb_setup(char*);
+
+static int pvr2fb_setcolreg(unsigned int regno, unsigned int red, unsigned int green, unsigned int blue,
+ unsigned int transp, struct fb_info *info);
+static int pvr2fb_blank(int blank, struct fb_info *info);
+static unsigned long get_line_length(int xres_virtual, int bpp);
+static void set_color_bitfields(struct fb_var_screeninfo *var);
+static int pvr2fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info);
+static int pvr2fb_set_par(struct fb_info *info);
+static void pvr2_update_display(struct fb_info *info);
+static void pvr2_init_display(struct fb_info *info);
+static void pvr2_do_blank(void);
+static irqreturn_t pvr2fb_interrupt(int irq, void *dev_id, struct pt_regs *fp);
+static int pvr2_init_cable(void);
+static int pvr2_get_param(const struct pvr2_params *p, const char *s,
+ int val, int size);
+static ssize_t pvr2fb_write(struct file *file, const char *buf,
+ size_t count, loff_t *ppos);
+
+static struct fb_ops pvr2fb_ops = {
+ .owner = THIS_MODULE,
+ .fb_setcolreg = pvr2fb_setcolreg,
+ .fb_blank = pvr2fb_blank,
+ .fb_check_var = pvr2fb_check_var,
+ .fb_set_par = pvr2fb_set_par,
+#ifdef CONFIG_SH_DMA
+ .fb_write = pvr2fb_write,
+#endif
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+ .fb_cursor = soft_cursor,
+};
+
+static struct fb_videomode pvr2_modedb[] __initdata = {
+ /*
+ * Broadcast video modes (PAL and NTSC). I'm unfamiliar with
+ * PAL-M and PAL-N, but from what I've read both modes parallel PAL and
+ * NTSC, so it shouldn't be a problem (I hope).
+ */
+
+ {
+ /* 640x480 @ 60Hz interlaced (NTSC) */
+ "ntsc_640x480i", 60, 640, 480, TV_CLK, 38, 33, 0, 18, 146, 26,
+ FB_SYNC_BROADCAST, FB_VMODE_INTERLACED | FB_VMODE_YWRAP
+ }, {
+ /* 640x240 @ 60Hz (NTSC) */
+ /* XXX: Broken! Don't use... */
+ "ntsc_640x240", 60, 640, 240, TV_CLK, 38, 33, 0, 0, 146, 22,
+ FB_SYNC_BROADCAST, FB_VMODE_YWRAP
+ }, {
+ /* 640x480 @ 60hz (VGA) */
+ "vga_640x480", 60, 640, 480, VGA_CLK, 38, 33, 0, 18, 146, 26,
+ 0, FB_VMODE_YWRAP
+ },
+};
+
+#define NUM_TOTAL_MODES ARRAY_SIZE(pvr2_modedb)
+
+#define DEFMODE_NTSC 0
+#define DEFMODE_PAL 0
+#define DEFMODE_VGA 2
+
+static int defmode = DEFMODE_NTSC;
+static char *mode_option __initdata = NULL;
+
+static inline void pvr2fb_set_pal_type(unsigned int type)
+{
+ struct pvr2fb_par *par = (struct pvr2fb_par *)fb_info->par;
+
+ fb_writel(type, par->mmio_base + 0x108);
+}
+
+static inline void pvr2fb_set_pal_entry(struct pvr2fb_par *par,
+ unsigned int regno,
+ unsigned int val)
+{
+ fb_writel(val, par->mmio_base + 0x1000 + (4 * regno));
+}
+
+static int pvr2fb_blank(int blank, struct fb_info *info)
+{
+ do_blank = blank ? blank : -1;
+ return 0;
+}
+
+static inline unsigned long get_line_length(int xres_virtual, int bpp)
+{
+ return (unsigned long)((((xres_virtual*bpp)+31)&~31) >> 3);
+}
+
+static void set_color_bitfields(struct fb_var_screeninfo *var)
+{
+ switch (var->bits_per_pixel) {
+ case 16: /* RGB 565 */
+ pvr2fb_set_pal_type(PAL_RGB565);
+ var->red.offset = 11; var->red.length = 5;
+ var->green.offset = 5; var->green.length = 6;
+ var->blue.offset = 0; var->blue.length = 5;
+ var->transp.offset = 0; var->transp.length = 0;
+ break;
+ case 24: /* RGB 888 */
+ var->red.offset = 16; var->red.length = 8;
+ var->green.offset = 8; var->green.length = 8;
+ var->blue.offset = 0; var->blue.length = 8;
+ var->transp.offset = 0; var->transp.length = 0;
+ break;
+ case 32: /* ARGB 8888 */
+ pvr2fb_set_pal_type(PAL_ARGB8888);
+ var->red.offset = 16; var->red.length = 8;
+ var->green.offset = 8; var->green.length = 8;
+ var->blue.offset = 0; var->blue.length = 8;
+ var->transp.offset = 24; var->transp.length = 8;
+ break;
+ }
+}
+
+static int pvr2fb_setcolreg(unsigned int regno, unsigned int red,
+ unsigned int green, unsigned int blue,
+ unsigned int transp, struct fb_info *info)
+{
+ struct pvr2fb_par *par = (struct pvr2fb_par *)info->par;
+ unsigned int tmp;
+
+ if (regno > info->cmap.len)
+ return 1;
+
+ /*
+ * We only support the hardware palette for 16 and 32bpp. It's also
+ * expected that the palette format has been set by the time we get
+ * here, so we don't waste time setting it again.
+ */
+ switch (info->var.bits_per_pixel) {
+ case 16: /* RGB 565 */
+ tmp = (red & 0xf800) |
+ ((green & 0xfc00) >> 5) |
+ ((blue & 0xf800) >> 11);
+
+ pvr2fb_set_pal_entry(par, regno, tmp);
+ ((u16*)(info->pseudo_palette))[regno] = tmp;
+ break;
+ case 24: /* RGB 888 */
+ red >>= 8; green >>= 8; blue >>= 8;
+ ((u32*)(info->pseudo_palette))[regno] = (red << 16) | (green << 8) | blue;
+ break;
+ case 32: /* ARGB 8888 */
+ red >>= 8; green >>= 8; blue >>= 8;
+ tmp = (transp << 24) | (red << 16) | (green << 8) | blue;
+
+ pvr2fb_set_pal_entry(par, regno, tmp);
+ ((u32*)(info->pseudo_palette))[regno] = tmp;
+ break;
+ default:
+ pr_debug("Invalid bit depth %d?!?\n", info->var.bits_per_pixel);
+ return 1;
+ }
+
+ return 0;
+}
+
+static int pvr2fb_set_par(struct fb_info *info)
+{
+ struct pvr2fb_par *par = (struct pvr2fb_par *)info->par;
+ struct fb_var_screeninfo *var = &info->var;
+ unsigned long line_length;
+ unsigned int vtotal;
+
+ /*
+ * XXX: It's possible that a user could use a VGA box, change the cable
+ * type in hardware (i.e. switch from VGA<->composite), then change
+ * modes (i.e. switching to another VT). If that happens we should
+ * automagically change the output format to cope, but currently I
+ * don't have a VGA box to make sure this works properly.
+ */
+ cable_type = pvr2_init_cable();
+ if (cable_type == CT_VGA && video_output != VO_VGA)
+ video_output = VO_VGA;
+
+ var->vmode &= FB_VMODE_MASK;
+ if (var->vmode & FB_VMODE_INTERLACED && video_output != VO_VGA)
+ par->is_interlaced = 1;
+ /*
+ * XXX: Need to be more creative with this (i.e. allow doublecan for
+ * PAL/NTSC output).
+ */
+ if (var->vmode & FB_VMODE_DOUBLE && video_output == VO_VGA)
+ par->is_doublescan = 1;
+
+ par->hsync_total = var->left_margin + var->xres + var->right_margin +
+ var->hsync_len;
+ par->vsync_total = var->upper_margin + var->yres + var->lower_margin +
+ var->vsync_len;
+
+ if (var->sync & FB_SYNC_BROADCAST) {
+ vtotal = par->vsync_total;
+ if (par->is_interlaced)
+ vtotal /= 2;
+ if (vtotal > (PAL_VTOTAL + NTSC_VTOTAL)/2) {
+ /* XXX: Check for start values here... */
+ /* XXX: Check hardware for PAL-compatibility */
+ par->borderstart_h = 116;
+ par->borderstart_v = 44;
+ } else {
+ /* NTSC video output */
+ par->borderstart_h = 126;
+ par->borderstart_v = 18;
+ }
+ } else {
+ /* VGA mode */
+ /* XXX: What else needs to be checked? */
+ /*
+ * XXX: We have a little freedom in VGA modes, what ranges
+ * should be here (i.e. hsync/vsync totals, etc.)?
+ */
+ par->borderstart_h = 126;
+ par->borderstart_v = 40;
+ }
+
+ /* Calculate the remainding offsets */
+ par->diwstart_h = par->borderstart_h + var->left_margin;
+ par->diwstart_v = par->borderstart_v + var->upper_margin;
+ par->borderstop_h = par->diwstart_h + var->xres +
+ var->right_margin;
+ par->borderstop_v = par->diwstart_v + var->yres +
+ var->lower_margin;
+
+ if (!par->is_interlaced)
+ par->borderstop_v /= 2;
+ if (info->var.xres < 640)
+ par->is_lowres = 1;
+
+ line_length = get_line_length(var->xres_virtual, var->bits_per_pixel);
+ par->disp_start = info->fix.smem_start + (line_length * var->yoffset) * line_length;
+ info->fix.line_length = line_length;
+ return 0;
+}
+
+static int pvr2fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+ struct pvr2fb_par *par = (struct pvr2fb_par *)info->par;
+ unsigned int vtotal, hsync_total;
+ unsigned long line_length;
+
+ if (var->pixclock != TV_CLK && var->pixclock != VGA_CLK) {
+ pr_debug("Invalid pixclock value %d\n", var->pixclock);
+ return -EINVAL;
+ }
+
+ if (var->xres < 320)
+ var->xres = 320;
+ if (var->yres < 240)
+ var->yres = 240;
+ if (var->xres_virtual < var->xres)
+ var->xres_virtual = var->xres;
+ if (var->yres_virtual < var->yres)
+ var->yres_virtual = var->yres;
+
+ if (var->bits_per_pixel <= 16)
+ var->bits_per_pixel = 16;
+ else if (var->bits_per_pixel <= 24)
+ var->bits_per_pixel = 24;
+ else if (var->bits_per_pixel <= 32)
+ var->bits_per_pixel = 32;
+
+ set_color_bitfields(var);
+
+ if (var->vmode & FB_VMODE_YWRAP) {
+ if (var->xoffset || var->yoffset < 0 ||
+ var->yoffset >= var->yres_virtual) {
+ var->xoffset = var->yoffset = 0;
+ } else {
+ if (var->xoffset > var->xres_virtual - var->xres ||
+ var->yoffset > var->yres_virtual - var->yres ||
+ var->xoffset < 0 || var->yoffset < 0)
+ var->xoffset = var->yoffset = 0;
+ }
+ } else {
+ var->xoffset = var->yoffset = 0;
+ }
+
+ /*
+ * XXX: Need to be more creative with this (i.e. allow doublecan for
+ * PAL/NTSC output).
+ */
+ if (var->yres < 480 && video_output == VO_VGA)
+ var->vmode |= FB_VMODE_DOUBLE;
+
+ if (video_output != VO_VGA) {
+ var->sync |= FB_SYNC_BROADCAST;
+ var->vmode |= FB_VMODE_INTERLACED;
+ } else {
+ var->sync &= ~FB_SYNC_BROADCAST;
+ var->vmode &= ~FB_VMODE_INTERLACED;
+ var->vmode |= pvr2_var.vmode;
+ }
+
+ if ((var->activate & FB_ACTIVATE_MASK) != FB_ACTIVATE_TEST) {
+ var->right_margin = par->borderstop_h -
+ (par->diwstart_h + var->xres);
+ var->left_margin = par->diwstart_h - par->borderstart_h;
+ var->hsync_len = par->borderstart_h +
+ (par->hsync_total - par->borderstop_h);
+
+ var->upper_margin = par->diwstart_v - par->borderstart_v;
+ var->lower_margin = par->borderstop_v -
+ (par->diwstart_v + var->yres);
+ var->vsync_len = par->borderstop_v +
+ (par->vsync_total - par->borderstop_v);
+ }
+
+ hsync_total = var->left_margin + var->xres + var->right_margin +
+ var->hsync_len;
+ vtotal = var->upper_margin + var->yres + var->lower_margin +
+ var->vsync_len;
+
+ if (var->sync & FB_SYNC_BROADCAST) {
+ if (var->vmode & FB_VMODE_INTERLACED)
+ vtotal /= 2;
+ if (vtotal > (PAL_VTOTAL + NTSC_VTOTAL)/2) {
+ /* PAL video output */
+ /* XXX: Should be using a range here ... ? */
+ if (hsync_total != PAL_HTOTAL) {
+ pr_debug("invalid hsync total for PAL\n");
+ return -EINVAL;
+ }
+ } else {
+ /* NTSC video output */
+ if (hsync_total != NTSC_HTOTAL) {
+ pr_debug("invalid hsync total for NTSC\n");
+ return -EINVAL;
+ }
+ }
+ }
+
+ /* Check memory sizes */
+ line_length = get_line_length(var->xres_virtual, var->bits_per_pixel);
+ if (line_length * var->yres_virtual > info->fix.smem_len)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static void pvr2_update_display(struct fb_info *info)
+{
+ struct pvr2fb_par *par = (struct pvr2fb_par *) info->par;
+ struct fb_var_screeninfo *var = &info->var;
+
+ /* Update the start address of the display image */
+ fb_writel(par->disp_start, DISP_DIWADDRL);
+ fb_writel(par->disp_start +
+ get_line_length(var->xoffset+var->xres, var->bits_per_pixel),
+ DISP_DIWADDRS);
+}
+
+/*
+ * Initialize the video mode. Currently, the 16bpp and 24bpp modes aren't
+ * very stable. It's probably due to the fact that a lot of the 2D video
+ * registers are still undocumented.
+ */
+
+static void pvr2_init_display(struct fb_info *info)
+{
+ struct pvr2fb_par *par = (struct pvr2fb_par *) info->par;
+ struct fb_var_screeninfo *var = &info->var;
+ unsigned int diw_height, diw_width, diw_modulo = 1;
+ unsigned int bytesperpixel = var->bits_per_pixel >> 3;
+
+ /* hsync and vsync totals */
+ fb_writel((par->vsync_total << 16) | par->hsync_total, DISP_SYNCSIZE);
+
+ /* column height, modulo, row width */
+ /* since we're "panning" within vram, we need to offset things based
+ * on the offset from the virtual x start to our real gfx. */
+ if (video_output != VO_VGA && par->is_interlaced)
+ diw_modulo += info->fix.line_length / 4;
+ diw_height = (par->is_interlaced ? var->yres / 2 : var->yres);
+ diw_width = get_line_length(var->xres, var->bits_per_pixel) / 4;
+ fb_writel((diw_modulo << 20) | (--diw_height << 10) | --diw_width,
+ DISP_DIWSIZE);
+
+ /* display address, long and short fields */
+ fb_writel(par->disp_start, DISP_DIWADDRL);
+ fb_writel(par->disp_start +
+ get_line_length(var->xoffset+var->xres, var->bits_per_pixel),
+ DISP_DIWADDRS);
+
+ /* border horizontal, border vertical, border color */
+ fb_writel((par->borderstart_h << 16) | par->borderstop_h, DISP_BRDRHORZ);
+ fb_writel((par->borderstart_v << 16) | par->borderstop_v, DISP_BRDRVERT);
+ fb_writel(0, DISP_BRDRCOLR);
+
+ /* display window start position */
+ fb_writel(par->diwstart_h, DISP_DIWHSTRT);
+ fb_writel((par->diwstart_v << 16) | par->diwstart_v, DISP_DIWVSTRT);
+
+ /* misc. settings */
+ fb_writel((0x16 << 16) | par->is_lowres, DISP_DIWCONF);
+
+ /* clock doubler (for VGA), scan doubler, display enable */
+ fb_writel(((video_output == VO_VGA) << 23) |
+ (par->is_doublescan << 1) | 1, DISP_DIWMODE);
+
+ /* bits per pixel */
+ fb_writel(fb_readl(DISP_DIWMODE) | (--bytesperpixel << 2), DISP_DIWMODE);
+
+ /* video enable, color sync, interlace,
+ * hsync and vsync polarity (currently unused) */
+ fb_writel(0x100 | ((par->is_interlaced /*|4*/) << 4), DISP_SYNCCONF);
+}
+
+/* Simulate blanking by making the border cover the entire screen */
+
+#define BLANK_BIT (1<<3)
+
+static void pvr2_do_blank(void)
+{
+ struct pvr2fb_par *par = currentpar;
+ unsigned long diwconf;
+
+ diwconf = fb_readl(DISP_DIWCONF);
+ if (do_blank > 0)
+ fb_writel(diwconf | BLANK_BIT, DISP_DIWCONF);
+ else
+ fb_writel(diwconf & ~BLANK_BIT, DISP_DIWCONF);
+
+ is_blanked = do_blank > 0 ? do_blank : 0;
+}
+
+static irqreturn_t pvr2fb_interrupt(int irq, void *dev_id, struct pt_regs *fp)
+{
+ struct fb_info *info = dev_id;
+
+ if (do_vmode_pan || do_vmode_full)
+ pvr2_update_display(info);
+ if (do_vmode_full)
+ pvr2_init_display(info);
+ if (do_vmode_pan)
+ do_vmode_pan = 0;
+ if (do_vmode_full)
+ do_vmode_full = 0;
+ if (do_blank) {
+ pvr2_do_blank();
+ do_blank = 0;
+ }
+ return IRQ_HANDLED;
+}
+
+/*
+ * Determine the cable type and initialize the cable output format. Don't do
+ * anything if the cable type has been overidden (via "cable:XX").
+ */
+
+#define PCTRA 0xff80002c
+#define PDTRA 0xff800030
+#define VOUTC 0xa0702c00
+
+static int pvr2_init_cable(void)
+{
+ if (cable_type < 0) {
+ fb_writel((fb_readl(PCTRA) & 0xfff0ffff) | 0x000a0000,
+ PCTRA);
+ cable_type = (fb_readw(PDTRA) >> 8) & 3;
+ }
+
+ /* Now select the output format (either composite or other) */
+ /* XXX: Save the previous val first, as this reg is also AICA
+ related */
+ if (cable_type == CT_COMPOSITE)
+ fb_writel(3 << 8, VOUTC);
+ else
+ fb_writel(0, VOUTC);
+
+ return cable_type;
+}
+
+#ifdef CONFIG_SH_DMA
+static ssize_t pvr2fb_write(struct file *file, const char *buf,
+ size_t count, loff_t *ppos)
+{
+ unsigned long dst, start, end, len;
+ unsigned int nr_pages;
+ struct page **pages;
+ int ret, i;
+
+ nr_pages = (count + PAGE_SIZE - 1) >> PAGE_SHIFT;
+
+ pages = kmalloc(nr_pages * sizeof(struct page *), GFP_KERNEL);
+ if (!pages)
+ return -ENOMEM;
+
+ down_read(&current->mm->mmap_sem);
+ ret = get_user_pages(current, current->mm, (unsigned long)buf,
+ nr_pages, WRITE, 0, pages, NULL);
+ up_read(&current->mm->mmap_sem);
+
+ if (ret < nr_pages) {
+ nr_pages = ret;
+ ret = -EINVAL;
+ goto out_unmap;
+ }
+
+ dma_configure_channel(shdma, 0x12c1);
+
+ dst = (unsigned long)fb_info->screen_base + *ppos;
+ start = (unsigned long)page_address(pages[0]);
+ end = (unsigned long)page_address(pages[nr_pages]);
+ len = nr_pages << PAGE_SHIFT;
+
+ /* Half-assed contig check */
+ if (start + len == end) {
+ /* As we do this in one shot, it's either all or nothing.. */
+ if ((*ppos + len) > fb_info->fix.smem_len) {
+ ret = -ENOSPC;
+ goto out_unmap;
+ }
+
+ dma_write(shdma, start, 0, len);
+ dma_write(pvr2dma, 0, dst, len);
+ dma_wait_for_completion(pvr2dma);
+
+ goto out;
+ }
+
+ /* Not contiguous, writeout per-page instead.. */
+ for (i = 0; i < nr_pages; i++, dst += PAGE_SIZE) {
+ if ((*ppos + (i << PAGE_SHIFT)) > fb_info->fix.smem_len) {
+ ret = -ENOSPC;
+ goto out_unmap;
+ }
+
+ dma_write_page(shdma, (unsigned long)page_address(pages[i]), 0);
+ dma_write_page(pvr2dma, 0, dst);
+ dma_wait_for_completion(pvr2dma);
+ }
+
+out:
+ *ppos += count;
+ ret = count;
+
+out_unmap:
+ for (i = 0; i < nr_pages; i++)
+ page_cache_release(pages[i]);
+
+ kfree(pages);
+
+ return ret;
+}
+#endif /* CONFIG_SH_DMA */
+
+/**
+ * pvr2fb_common_init
+ *
+ * Common init code for the PVR2 chips.
+ *
+ * This mostly takes care of the common aspects of the fb setup and
+ * registration. It's expected that the board-specific init code has
+ * already setup pvr2_fix with something meaningful at this point.
+ *
+ * Device info reporting is also done here, as well as picking a sane
+ * default from the modedb. For board-specific modelines, simply define
+ * a per-board modedb.
+ *
+ * Also worth noting is that the cable and video output types are likely
+ * always going to be VGA for the PCI-based PVR2 boards, but we leave this
+ * in for flexibility anyways. Who knows, maybe someone has tv-out on a
+ * PCI-based version of these things ;-)
+ */
+static int __init pvr2fb_common_init(void)
+{
+ struct pvr2fb_par *par = currentpar;
+ unsigned long modememused, rev;
+
+ fb_info->screen_base = ioremap_nocache(pvr2_fix.smem_start,
+ pvr2_fix.smem_len);
+
+ if (!fb_info->screen_base) {
+ printk(KERN_ERR "pvr2fb: Failed to remap smem space\n");
+ goto out_err;
+ }
+
+ par->mmio_base = (unsigned long)ioremap_nocache(pvr2_fix.mmio_start,
+ pvr2_fix.mmio_len);
+ if (!par->mmio_base) {
+ printk(KERN_ERR "pvr2fb: Failed to remap mmio space\n");
+ goto out_err;
+ }
+
+ fb_memset((unsigned long)fb_info->screen_base, 0, pvr2_fix.smem_len);
+
+ pvr2_fix.ypanstep = nopan ? 0 : 1;
+ pvr2_fix.ywrapstep = nowrap ? 0 : 1;
+
+ fb_info->fbops = &pvr2fb_ops;
+ fb_info->fix = pvr2_fix;
+ fb_info->par = currentpar;
+ fb_info->pseudo_palette = (void *)(fb_info->par + 1);
+ fb_info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
+
+ if (video_output == VO_VGA)
+ defmode = DEFMODE_VGA;
+
+ if (!mode_option)
+ mode_option = "640x480@60";
+
+ if (!fb_find_mode(&fb_info->var, fb_info, mode_option, pvr2_modedb,
+ NUM_TOTAL_MODES, &pvr2_modedb[defmode], 16))
+ fb_info->var = pvr2_var;
+
+ fb_alloc_cmap(&fb_info->cmap, 256, 0);
+
+ if (register_framebuffer(fb_info) < 0)
+ goto out_err;
+
+ modememused = get_line_length(fb_info->var.xres_virtual,
+ fb_info->var.bits_per_pixel);
+ modememused *= fb_info->var.yres_virtual;
+
+ rev = fb_readl(par->mmio_base + 0x04);
+
+ printk("fb%d: %s (rev %ld.%ld) frame buffer device, using %ldk/%ldk of video memory\n",
+ fb_info->node, fb_info->fix.id, (rev >> 4) & 0x0f, rev & 0x0f,
+ modememused >> 10, (unsigned long)(fb_info->fix.smem_len >> 10));
+ printk("fb%d: Mode %dx%d-%d pitch = %ld cable: %s video output: %s\n",
+ fb_info->node, fb_info->var.xres, fb_info->var.yres,
+ fb_info->var.bits_per_pixel,
+ get_line_length(fb_info->var.xres, fb_info->var.bits_per_pixel),
+ (char *)pvr2_get_param(cables, NULL, cable_type, 3),
+ (char *)pvr2_get_param(outputs, NULL, video_output, 3));
+
+#ifdef CONFIG_SH_STORE_QUEUES
+ printk(KERN_NOTICE "fb%d: registering with SQ API\n", fb_info->node);
+
+ pvr2fb_map = sq_remap(fb_info->fix.smem_start, fb_info->fix.smem_len,
+ fb_info->fix.id);
+
+ printk(KERN_NOTICE "fb%d: Mapped video memory to SQ addr 0x%lx\n",
+ fb_info->node, pvr2fb_map->sq_addr);
+#endif
+
+ return 0;
+
+out_err:
+ if (fb_info->screen_base)
+ iounmap(fb_info->screen_base);
+ if (par->mmio_base)
+ iounmap((void *)par->mmio_base);
+
+ return -ENXIO;
+}
+
+#ifdef CONFIG_SH_DREAMCAST
+static int __init pvr2fb_dc_init(void)
+{
+ if (!mach_is_dreamcast())
+ return -ENXIO;
+
+ /* Make a guess at the monitor based on the attached cable */
+ if (pvr2_init_cable() == CT_VGA) {
+ fb_info->monspecs.hfmin = 30000;
+ fb_info->monspecs.hfmax = 70000;
+ fb_info->monspecs.vfmin = 60;
+ fb_info->monspecs.vfmax = 60;
+ } else {
+ /* Not VGA, using a TV (taken from acornfb) */
+ fb_info->monspecs.hfmin = 15469;
+ fb_info->monspecs.hfmax = 15781;
+ fb_info->monspecs.vfmin = 49;
+ fb_info->monspecs.vfmax = 51;
+ }
+
+ /*
+ * XXX: This needs to pull default video output via BIOS or other means
+ */
+ if (video_output < 0) {
+ if (cable_type == CT_VGA) {
+ video_output = VO_VGA;
+ } else {
+ video_output = VO_NTSC;
+ }
+ }
+
+ /*
+ * Nothing exciting about the DC PVR2 .. only a measly 8MiB.
+ */
+ pvr2_fix.smem_start = 0xa5000000; /* RAM starts here */
+ pvr2_fix.smem_len = 8 << 20;
+
+ pvr2_fix.mmio_start = 0xa05f8000; /* registers start here */
+ pvr2_fix.mmio_len = 0x2000;
+
+ if (request_irq(HW_EVENT_VSYNC, pvr2fb_interrupt, 0,
+ "pvr2 VBL handler", fb_info)) {
+ return -EBUSY;
+ }
+
+#ifdef CONFIG_SH_DMA
+ if (request_dma(pvr2dma, "pvr2") != 0) {
+ free_irq(HW_EVENT_VSYNC, 0);
+ return -EBUSY;
+ }
+#endif
+
+ return pvr2fb_common_init();
+}
+
+static void pvr2fb_dc_exit(void)
+{
+ free_irq(HW_EVENT_VSYNC, 0);
+#ifdef CONFIG_SH_DMA
+ free_dma(pvr2dma);
+#endif
+}
+#endif /* CONFIG_SH_DREAMCAST */
+
+#ifdef CONFIG_PCI
+static int __devinit pvr2fb_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ int ret;
+
+ ret = pci_enable_device(pdev);
+ if (ret) {
+ printk(KERN_ERR "pvr2fb: PCI enable failed\n");
+ return ret;
+ }
+
+ ret = pci_request_regions(pdev, "pvr2fb");
+ if (ret) {
+ printk(KERN_ERR "pvr2fb: PCI request regions failed\n");
+ return ret;
+ }
+
+ /*
+ * Slightly more exciting than the DC PVR2 .. 16MiB!
+ */
+ pvr2_fix.smem_start = pci_resource_start(pdev, 0);
+ pvr2_fix.smem_len = pci_resource_len(pdev, 0);
+
+ pvr2_fix.mmio_start = pci_resource_start(pdev, 1);
+ pvr2_fix.mmio_len = pci_resource_len(pdev, 1);
+
+ fb_info->device = &pdev->dev;
+
+ return pvr2fb_common_init();
+}
+
+static void __devexit pvr2fb_pci_remove(struct pci_dev *pdev)
+{
+ pci_release_regions(pdev);
+}
+
+static struct pci_device_id pvr2fb_pci_tbl[] __devinitdata = {
+ { PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_NEON250,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { 0, },
+};
+
+MODULE_DEVICE_TABLE(pci, pvr2fb_pci_tbl);
+
+static struct pci_driver pvr2fb_pci_driver = {
+ .name = "pvr2fb",
+ .id_table = pvr2fb_pci_tbl,
+ .probe = pvr2fb_pci_probe,
+ .remove = __devexit_p(pvr2fb_pci_remove),
+};
+
+static int __init pvr2fb_pci_init(void)
+{
+ return pci_register_driver(&pvr2fb_pci_driver);
+}
+
+static void pvr2fb_pci_exit(void)
+{
+ pci_unregister_driver(&pvr2fb_pci_driver);
+}
+#endif /* CONFIG_PCI */
+
+static int __init pvr2_get_param(const struct pvr2_params *p, const char *s,
+ int val, int size)
+{
+ int i;
+
+ for (i = 0 ; i < size ; i++ ) {
+ if (s != NULL) {
+ if (!strnicmp(p[i].name, s, strlen(s)))
+ return p[i].val;
+ } else {
+ if (p[i].val == val)
+ return (int)p[i].name;
+ }
+ }
+ return -1;
+}
+
+/*
+ * Parse command arguments. Supported arguments are:
+ * inverse Use inverse color maps
+ * cable:composite|rgb|vga Override the video cable type
+ * output:NTSC|PAL|VGA Override the video output format
+ *
+ * <xres>x<yres>[-<bpp>][@<refresh>] or,
+ * <name>[-<bpp>][@<refresh>] Startup using this video mode
+ */
+
+#ifndef MODULE
+int __init pvr2fb_setup(char *options)
+{
+ char *this_opt;
+ char cable_arg[80];
+ char output_arg[80];
+
+ if (!options || !*options)
+ return 0;
+
+ while ((this_opt = strsep(&options, ","))) {
+ if (!*this_opt)
+ continue;
+ if (!strcmp(this_opt, "inverse")) {
+ fb_invert_cmaps();
+ } else if (!strncmp(this_opt, "cable:", 6)) {
+ strcpy(cable_arg, this_opt + 6);
+ } else if (!strncmp(this_opt, "output:", 7)) {
+ strcpy(output_arg, this_opt + 7);
+ } else if (!strncmp(this_opt, "nopan", 5)) {
+ nopan = 1;
+ } else if (!strncmp(this_opt, "nowrap", 6)) {
+ nowrap = 1;
+ } else {
+ mode_option = this_opt;
+ }
+ }
+
+ if (*cable_arg)
+ cable_type = pvr2_get_param(cables, cable_arg, 0, 3);
+ if (*output_arg)
+ video_output = pvr2_get_param(outputs, output_arg, 0, 3);
+
+ return 0;
+}
+#endif
+
+static struct pvr2_board {
+ int (*init)(void);
+ void (*exit)(void);
+ char name[16];
+} board_list[] = {
+#ifdef CONFIG_SH_DREAMCAST
+ { pvr2fb_dc_init, pvr2fb_dc_exit, "Sega DC PVR2" },
+#endif
+#ifdef CONFIG_PCI
+ { pvr2fb_pci_init, pvr2fb_pci_exit, "PCI PVR2" },
+#endif
+ { 0, },
+};
+
+int __init pvr2fb_init(void)
+{
+ int i, ret = -ENODEV;
+ int size;
+
+#ifndef MODULE
+ char *option = NULL;
+
+ if (fb_get_options("pvr2fb", &option))
+ return -ENODEV;
+ pvr2fb_setup(option);
+#endif
+ size = sizeof(struct fb_info) + sizeof(struct pvr2fb_par) + 16 * sizeof(u32);
+
+ fb_info = kmalloc(size, GFP_KERNEL);
+ if (!fb_info) {
+ printk(KERN_ERR "Failed to allocate memory for fb_info\n");
+ return -ENOMEM;
+ }
+
+ memset(fb_info, 0, size);
+
+ currentpar = (struct pvr2fb_par *)(fb_info + 1);
+
+ for (i = 0; i < ARRAY_SIZE(board_list); i++) {
+ struct pvr2_board *pvr_board = board_list + i;
+
+ if (!pvr_board->init)
+ continue;
+
+ ret = pvr_board->init();
+
+ if (ret != 0) {
+ printk(KERN_ERR "pvr2fb: Failed init of %s device\n",
+ pvr_board->name);
+ kfree(fb_info);
+ break;
+ }
+ }
+
+ return ret;
+}
+
+static void __exit pvr2fb_exit(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(board_list); i++) {
+ struct pvr2_board *pvr_board = board_list + i;
+
+ if (pvr_board->exit)
+ pvr_board->exit();
+ }
+
+#ifdef CONFIG_SH_STORE_QUEUES
+ sq_unmap(pvr2fb_map);
+#endif
+
+ unregister_framebuffer(fb_info);
+ kfree(fb_info);
+}
+
+module_init(pvr2fb_init);
+module_exit(pvr2fb_exit);
+
+MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>, M. R. Brown <mrbrown@0xd6.org>");
+MODULE_DESCRIPTION("Framebuffer driver for NEC PowerVR 2 based graphics boards");
+MODULE_LICENSE("GPL");
+