summaryrefslogtreecommitdiffstats
path: root/drivers/video/sstfb.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/video/sstfb.c')
-rw-r--r--drivers/video/sstfb.c1722
1 files changed, 1722 insertions, 0 deletions
diff --git a/drivers/video/sstfb.c b/drivers/video/sstfb.c
new file mode 100644
index 000000000000..663d53657fa4
--- /dev/null
+++ b/drivers/video/sstfb.c
@@ -0,0 +1,1722 @@
+/*
+ * linux/drivers/video/sstfb.c -- voodoo graphics frame buffer
+ *
+ * Copyright (c) 2000-2002 Ghozlane Toumi <gtoumi@laposte.net>
+ *
+ * Created 15 Jan 2000 by Ghozlane Toumi
+ *
+ * Contributions (and many thanks) :
+ *
+ * 03/2001 James Simmons <jsimmons@infradead.org>
+ * 04/2001 Paul Mundt <lethal@chaoticdreams.org>
+ * 05/2001 Urs Ganse <ursg@uni.de>
+ * (initial work on voodoo2 port, interlace)
+ * 09/2002 Helge Deller <deller@gmx.de>
+ * (enable driver on big-endian machines (hppa), ioctl fixes)
+ * 12/2002 Helge Deller <deller@gmx.de>
+ * (port driver to new frambuffer infrastructure)
+ * 01/2003 Helge Deller <deller@gmx.de>
+ * (initial work on fb hardware acceleration for voodoo2)
+ *
+ */
+
+/*
+ * The voodoo1 has the following memory mapped address space:
+ * 0x000000 - 0x3fffff : registers (4MB)
+ * 0x400000 - 0x7fffff : linear frame buffer (4MB)
+ * 0x800000 - 0xffffff : texture memory (8MB)
+ */
+
+/*
+ * misc notes, TODOs, toASKs, and deep thoughts
+
+-TODO: at one time or another test that the mode is acceptable by the monitor
+-ASK: Can I choose different ordering for the color bitfields (rgba argb ...)
+ wich one should i use ? is there any preferred one ? It seems ARGB is
+ the one ...
+-TODO: in set_var check the validity of timings (hsync vsync)...
+-TODO: check and recheck the use of sst_wait_idle : we don't flush the fifo via
+ a nop command. so it's ok as long as the commands we pass don't go
+ through the fifo. warning: issuing a nop command seems to need pci_fifo
+-FIXME: in case of failure in the init sequence, be sure we return to a safe
+ state.
+-FIXME: 4MB boards have banked memory (FbiInit2 bits 1 & 20)
+ */
+
+/*
+ * debug info
+ * SST_DEBUG : enable debugging
+ * SST_DEBUG_REG : debug registers
+ * 0 : no debug
+ * 1 : dac calls, [un]set_bits, FbiInit
+ * 2 : insane debug level (log every register read/write)
+ * SST_DEBUG_FUNC : functions
+ * 0 : no debug
+ * 1 : function call / debug ioctl
+ * 2 : variables
+ * 3 : flood . you don't want to do that. trust me.
+ * SST_DEBUG_VAR : debug display/var structs
+ * 0 : no debug
+ * 1 : dumps display, fb_var
+ *
+ * sstfb specific ioctls:
+ * toggle vga (0x46db) : toggle vga_pass_through
+ * fill fb (0x46dc) : fills fb
+ * test disp (0x46de) : draws a test image
+ */
+
+#undef SST_DEBUG
+
+/* enable 24/32 bpp functions ? (completely untested!) */
+#undef EN_24_32_BPP
+
+/*
+ Default video mode .
+ 0 800x600@60 took from glide
+ 1 640x480@75 took from glide
+ 2 1024x768@76 std fb.mode
+ 3 640x480@60 glide default */
+#define DEFAULT_MODE 3
+
+/*
+ * Includes
+ */
+
+#include <linux/config.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/fb.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <asm/io.h>
+#include <asm/ioctl.h>
+#include <asm/uaccess.h>
+#include <video/sstfb.h>
+
+
+/* initialized by setup */
+
+static int vgapass; /* enable Vga passthrough cable */
+static int mem; /* mem size in MB, 0 = autodetect */
+static int clipping = 1; /* use clipping (slower, safer) */
+static int gfxclk; /* force FBI freq in Mhz . Dangerous */
+static int slowpci; /* slow PCI settings */
+
+static char *mode_option __devinitdata;
+
+enum {
+ ID_VOODOO1 = 0,
+ ID_VOODOO2 = 1,
+};
+
+#define IS_VOODOO2(par) ((par)->type == ID_VOODOO2)
+
+static struct sst_spec voodoo_spec[] __devinitdata = {
+ { .name = "Voodoo Graphics", .default_gfx_clock = 50000, .max_gfxclk = 60 },
+ { .name = "Voodoo2", .default_gfx_clock = 75000, .max_gfxclk = 85 },
+};
+
+static struct fb_var_screeninfo sstfb_default =
+#if ( DEFAULT_MODE == 0 )
+ { /* 800x600@60, 16 bpp .borowed from glide/sst1/include/sst1init.h */
+ 800, 600, 800, 600, 0, 0, 16, 0,
+ {11, 5, 0}, {5, 6, 0}, {0, 5, 0}, {0, 0, 0},
+ 0, 0, -1, -1, 0,
+ 25000, 86, 41, 23, 1, 127, 4,
+ 0, FB_VMODE_NONINTERLACED };
+#elif ( DEFAULT_MODE == 1 )
+ {/* 640x480@75, 16 bpp .borowed from glide/sst1/include/sst1init.h */
+ 640, 480, 640, 480, 0, 0, 16, 0,
+ {11, 5, 0}, {5, 6, 0}, {0, 5, 0}, {0, 0, 0},
+ 0, 0, -1, -1, 0,
+ 31746, 118, 17, 16, 1, 63, 3,
+ 0, FB_VMODE_NONINTERLACED };
+#elif ( DEFAULT_MODE == 2 )
+ { /* 1024x768@76 took from my /etc/fb.modes */
+ 1024, 768, 1024, 768,0, 0, 16,0,
+ {11, 5, 0}, {5, 6, 0}, {0, 5, 0}, {0, 0, 0},
+ 0, 0, -1, -1, 0,
+ 11764, 208, 8, 36, 16, 120, 3 ,
+ 0, FB_VMODE_NONINTERLACED };
+#elif ( DEFAULT_MODE == 3 )
+ { /* 640x480@60 , 16bpp glide default ?*/
+ 640, 480, 640, 480, 0, 0, 16, 0,
+ {11, 5, 0}, {5, 6, 0}, {0, 5, 0}, {0, 0, 0},
+ 0, 0, -1, -1, 0,
+ 39721 , 38, 26 , 25 ,18 , 96 ,2,
+ 0, FB_VMODE_NONINTERLACED };
+#elif
+ #error "Invalid DEFAULT_MODE value !"
+#endif
+
+
+/*
+ * debug functions
+ */
+
+static void sstfb_drawdebugimage(struct fb_info *info);
+static int sstfb_dump_regs(struct fb_info *info);
+
+
+#if (SST_DEBUG_REG > 0)
+static void sst_dbg_print_read_reg(u32 reg, u32 val) {
+ const char *regname;
+ switch (reg) {
+ case FBIINIT0: regname = "FbiInit0"; break;
+ case FBIINIT1: regname = "FbiInit1"; break;
+ case FBIINIT2: regname = "FbiInit2"; break;
+ case FBIINIT3: regname = "FbiInit3"; break;
+ case FBIINIT4: regname = "FbiInit4"; break;
+ case FBIINIT5: regname = "FbiInit5"; break;
+ case FBIINIT6: regname = "FbiInit6"; break;
+ default: regname = NULL; break;
+ }
+ if (regname == NULL)
+ r_ddprintk("sst_read(%#x): %#x\n", reg, val);
+ else
+ r_dprintk(" sst_read(%s): %#x\n", regname, val);
+}
+
+static void sst_dbg_print_write_reg(u32 reg, u32 val) {
+ const char *regname;
+ switch (reg) {
+ case FBIINIT0: regname = "FbiInit0"; break;
+ case FBIINIT1: regname = "FbiInit1"; break;
+ case FBIINIT2: regname = "FbiInit2"; break;
+ case FBIINIT3: regname = "FbiInit3"; break;
+ case FBIINIT4: regname = "FbiInit4"; break;
+ case FBIINIT5: regname = "FbiInit5"; break;
+ case FBIINIT6: regname = "FbiInit6"; break;
+ default: regname = NULL; break;
+ }
+ if (regname == NULL)
+ r_ddprintk("sst_write(%#x, %#x)\n", reg, val);
+ else
+ r_dprintk(" sst_write(%s, %#x)\n", regname, val);
+}
+#else /* (SST_DEBUG_REG > 0) */
+# define sst_dbg_print_read_reg(reg, val) do {} while(0)
+# define sst_dbg_print_write_reg(reg, val) do {} while(0)
+#endif /* (SST_DEBUG_REG > 0) */
+
+/*
+ * hardware access functions
+ */
+
+/* register access */
+#define sst_read(reg) __sst_read(par->mmio_vbase, reg)
+#define sst_write(reg,val) __sst_write(par->mmio_vbase, reg, val)
+#define sst_set_bits(reg,val) __sst_set_bits(par->mmio_vbase, reg, val)
+#define sst_unset_bits(reg,val) __sst_unset_bits(par->mmio_vbase, reg, val)
+#define sst_dac_read(reg) __sst_dac_read(par->mmio_vbase, reg)
+#define sst_dac_write(reg,val) __sst_dac_write(par->mmio_vbase, reg, val)
+#define dac_i_read(reg) __dac_i_read(par->mmio_vbase, reg)
+#define dac_i_write(reg,val) __dac_i_write(par->mmio_vbase, reg, val)
+
+static inline u32 __sst_read(u8 __iomem *vbase, u32 reg)
+{
+ u32 ret = readl(vbase + reg);
+ sst_dbg_print_read_reg(reg, ret);
+ return ret;
+}
+
+static inline void __sst_write(u8 __iomem *vbase, u32 reg, u32 val)
+{
+ sst_dbg_print_write_reg(reg, val);
+ writel(val, vbase + reg);
+}
+
+static inline void __sst_set_bits(u8 __iomem *vbase, u32 reg, u32 val)
+{
+ r_dprintk("sst_set_bits(%#x, %#x)\n", reg, val);
+ __sst_write(vbase, reg, __sst_read(vbase, reg) | val);
+}
+
+static inline void __sst_unset_bits(u8 __iomem *vbase, u32 reg, u32 val)
+{
+ r_dprintk("sst_unset_bits(%#x, %#x)\n", reg, val);
+ __sst_write(vbase, reg, __sst_read(vbase, reg) & ~val);
+}
+
+/*
+ * wait for the fbi chip. ASK: what happens if the fbi is stuck ?
+ *
+ * the FBI is supposed to be ready if we receive 5 time
+ * in a row a "idle" answer to our requests
+ */
+
+#define sst_wait_idle() __sst_wait_idle(par->mmio_vbase)
+
+static int __sst_wait_idle(u8 __iomem *vbase)
+{
+ int count = 0;
+
+ /* if (doFBINOP) __sst_write(vbase, NOPCMD, 0); */
+
+ while(1) {
+ if (__sst_read(vbase, STATUS) & STATUS_FBI_BUSY) {
+ f_dddprintk("status: busy\n");
+/* FIXME basicaly, this is a busy wait. maybe not that good. oh well;
+ * this is a small loop after all.
+ * Or maybe we should use mdelay() or udelay() here instead ? */
+ count = 0;
+ } else {
+ count++;
+ f_dddprintk("status: idle(%d)\n", count);
+ }
+ if (count >= 5) return 1;
+/* XXX do something to avoid hanging the machine if the voodoo is out */
+ }
+}
+
+
+/* dac access */
+/* dac_read should be remaped to FbiInit2 (via the pci reg init_enable) */
+static u8 __sst_dac_read(u8 __iomem *vbase, u8 reg)
+{
+ u8 ret;
+
+ reg &= 0x07;
+ __sst_write(vbase, DAC_DATA, ((u32)reg << 8) | DAC_READ_CMD );
+ __sst_wait_idle(vbase);
+ /* udelay(10); */
+ ret = __sst_read(vbase, DAC_READ) & 0xff;
+ r_dprintk("sst_dac_read(%#x): %#x\n", reg, ret);
+
+ return ret;
+}
+
+static void __sst_dac_write(u8 __iomem *vbase, u8 reg, u8 val)
+{
+ r_dprintk("sst_dac_write(%#x, %#x)\n", reg, val);
+ reg &= 0x07;
+ __sst_write(vbase, DAC_DATA,(((u32)reg << 8)) | (u32)val);
+}
+
+/* indexed access to ti/att dacs */
+static u32 __dac_i_read(u8 __iomem *vbase, u8 reg)
+{
+ u32 ret;
+
+ __sst_dac_write(vbase, DACREG_ADDR_I, reg);
+ ret = __sst_dac_read(vbase, DACREG_DATA_I);
+ r_dprintk("sst_dac_read_i(%#x): %#x\n", reg, ret);
+ return ret;
+}
+static void __dac_i_write(u8 __iomem *vbase, u8 reg,u8 val)
+{
+ r_dprintk("sst_dac_write_i(%#x, %#x)\n", reg, val);
+ __sst_dac_write(vbase, DACREG_ADDR_I, reg);
+ __sst_dac_write(vbase, DACREG_DATA_I, val);
+}
+
+/* compute the m,n,p , returns the real freq
+ * (ics datasheet : N <-> N1 , P <-> N2)
+ *
+ * Fout= Fref * (M+2)/( 2^P * (N+2))
+ * we try to get close to the asked freq
+ * with P as high, and M as low as possible
+ * range:
+ * ti/att : 0 <= M <= 255; 0 <= P <= 3; 0<= N <= 63
+ * ics : 1 <= M <= 127; 0 <= P <= 3; 1<= N <= 31
+ * we'll use the lowest limitation, should be precise enouth
+ */
+static int sst_calc_pll(const int freq, int *freq_out, struct pll_timing *t)
+{
+ int m, m2, n, p, best_err, fout;
+ int best_n = -1;
+ int best_m = -1;
+
+ best_err = freq;
+ p = 3;
+ /* f * 2^P = vco should be less than VCOmax ~ 250 MHz for ics*/
+ while (((1 << p) * freq > VCO_MAX) && (p >= 0))
+ p--;
+ if (p == -1)
+ return -EINVAL;
+ for (n = 1; n < 32; n++) {
+ /* calc 2 * m so we can round it later*/
+ m2 = (2 * freq * (1 << p) * (n + 2) ) / DAC_FREF - 4 ;
+
+ m = (m2 % 2 ) ? m2/2+1 : m2/2 ;
+ if (m >= 128)
+ break;
+ fout = (DAC_FREF * (m + 2)) / ((1 << p) * (n + 2));
+ if ((abs(fout - freq) < best_err) && (m > 0)) {
+ best_n = n;
+ best_m = m;
+ best_err = abs(fout - freq);
+ /* we get the lowest m , allowing 0.5% error in freq*/
+ if (200*best_err < freq) break;
+ }
+ }
+ if (best_n == -1) /* unlikely, but who knows ? */
+ return -EINVAL;
+ t->p = p;
+ t->n = best_n;
+ t->m = best_m;
+ *freq_out = (DAC_FREF * (t->m + 2)) / ((1 << t->p) * (t->n + 2));
+ f_ddprintk ("m: %d, n: %d, p: %d, F: %dKhz\n",
+ t->m, t->n, t->p, *freq_out);
+ return 0;
+}
+
+/*
+ * clear lfb screen
+ */
+static void sstfb_clear_screen(struct fb_info *info)
+{
+ /* clear screen */
+ fb_memset(info->screen_base, 0, info->fix.smem_len);
+}
+
+
+/**
+ * sstfb_check_var - Optional function. Validates a var passed in.
+ * @var: frame buffer variable screen structure
+ * @info: frame buffer structure that represents a single frame buffer
+ */
+static int sstfb_check_var(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ struct sstfb_par *par = (struct sstfb_par *) info->par;
+ int hSyncOff = var->xres + var->right_margin + var->left_margin;
+ int vSyncOff = var->yres + var->lower_margin + var->upper_margin;
+ int vBackPorch = var->left_margin, yDim = var->yres;
+ int vSyncOn = var->vsync_len;
+ int tiles_in_X, real_length;
+ unsigned int freq;
+
+ if (sst_calc_pll(PICOS2KHZ(var->pixclock), &freq, &par->pll)) {
+ eprintk("Pixclock at %ld KHZ out of range\n",
+ PICOS2KHZ(var->pixclock));
+ return -EINVAL;
+ }
+ var->pixclock = KHZ2PICOS(freq);
+
+ if (var->vmode & FB_VMODE_INTERLACED)
+ vBackPorch += (vBackPorch % 2);
+ if (var->vmode & FB_VMODE_DOUBLE) {
+ vBackPorch <<= 1;
+ yDim <<=1;
+ vSyncOn <<=1;
+ vSyncOff <<=1;
+ }
+
+ switch (var->bits_per_pixel) {
+ case 0 ... 16 :
+ var->bits_per_pixel = 16;
+ break;
+#ifdef EN_24_32_BPP
+ case 17 ... 24 :
+ var->bits_per_pixel = 24;
+ break;
+ case 25 ... 32 :
+ var->bits_per_pixel = 32;
+ break;
+#endif
+ default :
+ eprintk("Unsupported bpp %d\n", var->bits_per_pixel);
+ return -EINVAL;
+ }
+
+ /* validity tests */
+ if ((var->xres <= 1) || (yDim <= 0 )
+ || (var->hsync_len <= 1)
+ || (hSyncOff <= 1)
+ || (var->left_margin <= 2)
+ || (vSyncOn <= 0)
+ || (vSyncOff <= 0)
+ || (vBackPorch <= 0)) {
+ return -EINVAL;
+ }
+
+ if (IS_VOODOO2(par)) {
+ /* Voodoo 2 limits */
+ tiles_in_X = (var->xres + 63 ) / 64 * 2;
+
+ if (((var->xres - 1) >= POW2(11)) || (yDim >= POW2(11))) {
+ eprintk("Unsupported resolution %dx%d\n",
+ var->xres, var->yres);
+ return -EINVAL;
+ }
+
+ if (((var->hsync_len-1) >= POW2(9))
+ || ((hSyncOff-1) >= POW2(11))
+ || ((var->left_margin - 2) >= POW2(9))
+ || (vSyncOn >= POW2(13))
+ || (vSyncOff >= POW2(13))
+ || (vBackPorch >= POW2(9))
+ || (tiles_in_X >= POW2(6))
+ || (tiles_in_X <= 0)) {
+ eprintk("Unsupported Timings\n");
+ return -EINVAL;
+ }
+ } else {
+ /* Voodoo limits */
+ tiles_in_X = (var->xres + 63 ) / 64;
+
+ if (var->vmode) {
+ eprintk("Interlace/Doublescan not supported %#x\n",
+ var->vmode);
+ return -EINVAL;
+ }
+ if (((var->xres - 1) >= POW2(10)) || (var->yres >= POW2(10))) {
+ eprintk("Unsupported resolution %dx%d\n",
+ var->xres, var->yres);
+ return -EINVAL;
+ }
+ if (((var->hsync_len - 1) >= POW2(8))
+ || ((hSyncOff-1) >= POW2(10))
+ || ((var->left_margin - 2) >= POW2(8))
+ || (vSyncOn >= POW2(12))
+ || (vSyncOff >= POW2(12))
+ || (vBackPorch >= POW2(8))
+ || (tiles_in_X >= POW2(4))
+ || (tiles_in_X <= 0)) {
+ eprintk("Unsupported Timings\n");
+ return -EINVAL;
+ }
+ }
+
+ /* it seems that the fbi uses tiles of 64x16 pixels to "map" the mem */
+ /* FIXME: i don't like this... looks wrong */
+ real_length = tiles_in_X * (IS_VOODOO2(par) ? 32 : 64 )
+ * ((var->bits_per_pixel == 16) ? 2 : 4);
+
+ if ((real_length * yDim) > info->fix.smem_len) {
+ eprintk("Not enough video memory\n");
+ return -ENOMEM;
+ }
+
+ var->sync &= (FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT);
+ var->vmode &= (FB_VMODE_INTERLACED | FB_VMODE_DOUBLE);
+ var->xoffset = 0;
+ var->yoffset = 0;
+ var->height = -1;
+ var->width = -1;
+
+ /*
+ * correct the color bit fields
+ */
+ /* var->{red|green|blue}.msb_right = 0; */
+
+ switch (var->bits_per_pixel) {
+ case 16: /* RGB 565 LfbMode 0 */
+ var->red.length = 5;
+ var->green.length = 6;
+ var->blue.length = 5;
+ var->transp.length = 0;
+
+ var->red.offset = 11;
+ var->green.offset = 5;
+ var->blue.offset = 0;
+ var->transp.offset = 0;
+ break;
+#ifdef EN_24_32_BPP
+ case 24: /* RGB 888 LfbMode 4 */
+ case 32: /* ARGB 8888 LfbMode 5 */
+ var->red.length = 8;
+ var->green.length = 8;
+ var->blue.length = 8;
+ var->transp.length = 0;
+
+ var->red.offset = 16;
+ var->green.offset = 8;
+ var->blue.offset = 0;
+ var->transp.offset = 0; /* in 24bpp we fake a 32 bpp mode */
+ break;
+#endif
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/**
+ * sstfb_set_par - Optional function. Alters the hardware state.
+ * @info: frame buffer structure that represents a single frame buffer
+ */
+static int sstfb_set_par(struct fb_info *info)
+{
+ struct sstfb_par *par = (struct sstfb_par *) info->par;
+ u32 lfbmode, fbiinit1, fbiinit2, fbiinit3, fbiinit5, fbiinit6=0;
+ struct pci_dev *sst_dev = par->dev;
+ unsigned int freq;
+ int ntiles;
+
+ par->hSyncOff = info->var.xres + info->var.right_margin + info->var.left_margin;
+
+ par->yDim = info->var.yres;
+ par->vSyncOn = info->var.vsync_len;
+ par->vSyncOff = info->var.yres + info->var.lower_margin + info->var.upper_margin;
+ par->vBackPorch = info->var.upper_margin;
+
+ /* We need par->pll */
+ sst_calc_pll(PICOS2KHZ(info->var.pixclock), &freq, &par->pll);
+
+ if (info->var.vmode & FB_VMODE_INTERLACED)
+ par->vBackPorch += (par->vBackPorch % 2);
+ if (info->var.vmode & FB_VMODE_DOUBLE) {
+ par->vBackPorch <<= 1;
+ par->yDim <<=1;
+ par->vSyncOn <<=1;
+ par->vSyncOff <<=1;
+ }
+
+ if (IS_VOODOO2(par)) {
+ /* voodoo2 has 32 pixel wide tiles , BUT stange things
+ happen with odd number of tiles */
+ par->tiles_in_X = (info->var.xres + 63 ) / 64 * 2;
+ } else {
+ /* voodoo1 has 64 pixels wide tiles. */
+ par->tiles_in_X = (info->var.xres + 63 ) / 64;
+ }
+
+ f_ddprintk("hsync_len hSyncOff vsync_len vSyncOff\n");
+ f_ddprintk("%-7d %-8d %-7d %-8d\n",
+ info->var.hsync_len, par->hSyncOff,
+ par->vSyncOn, par->vSyncOff);
+ f_ddprintk("left_margin upper_margin xres yres Freq\n");
+ f_ddprintk("%-10d %-10d %-4d %-4d %-8ld\n",
+ info->var.left_margin, info->var.upper_margin,
+ info->var.xres, info->var.yres, PICOS2KHZ(info->var.pixclock));
+
+ sst_write(NOPCMD, 0);
+ sst_wait_idle();
+ pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, PCI_EN_INIT_WR);
+ sst_set_bits(FBIINIT1, VIDEO_RESET);
+ sst_set_bits(FBIINIT0, FBI_RESET | FIFO_RESET);
+ sst_unset_bits(FBIINIT2, EN_DRAM_REFRESH);
+ sst_wait_idle();
+
+ /*sst_unset_bits (FBIINIT0, FBI_RESET); / reenable FBI ? */
+
+ sst_write(BACKPORCH, par->vBackPorch << 16 | (info->var.left_margin - 2));
+ sst_write(VIDEODIMENSIONS, par->yDim << 16 | (info->var.xres - 1));
+ sst_write(HSYNC, (par->hSyncOff - 1) << 16 | (info->var.hsync_len - 1));
+ sst_write(VSYNC, par->vSyncOff << 16 | par->vSyncOn);
+
+ fbiinit2 = sst_read(FBIINIT2);
+ fbiinit3 = sst_read(FBIINIT3);
+
+ /* everything is reset. we enable fbiinit2/3 remap : dac acces ok */
+ pci_write_config_dword(sst_dev, PCI_INIT_ENABLE,
+ PCI_EN_INIT_WR | PCI_REMAP_DAC );
+
+ par->dac_sw.set_vidmod(info, info->var.bits_per_pixel);
+
+ /* set video clock */
+ par->dac_sw.set_pll(info, &par->pll, VID_CLOCK);
+
+ /* disable fbiinit2/3 remap */
+ pci_write_config_dword(sst_dev, PCI_INIT_ENABLE,
+ PCI_EN_INIT_WR);
+
+ /* restore fbiinit2/3 */
+ sst_write(FBIINIT2,fbiinit2);
+ sst_write(FBIINIT3,fbiinit3);
+
+ fbiinit1 = (sst_read(FBIINIT1) & VIDEO_MASK)
+ | EN_DATA_OE
+ | EN_BLANK_OE
+ | EN_HVSYNC_OE
+ | EN_DCLK_OE
+ /* | (15 << TILES_IN_X_SHIFT) */
+ | SEL_INPUT_VCLK_2X
+ /* | (2 << VCLK_2X_SEL_DEL_SHIFT)
+ | (2 << VCLK_DEL_SHIFT) */;
+/* try with vclk_in_delay =0 (bits 29:30) , vclk_out_delay =0 (bits(27:28)
+ in (near) future set them accordingly to revision + resolution (cf glide)
+ first understand what it stands for :)
+ FIXME: there are some artefacts... check for the vclk_in_delay
+ lets try with 6ns delay in both vclk_out & in...
+ doh... they're still there :\
+*/
+
+ ntiles = par->tiles_in_X;
+ if (IS_VOODOO2(par)) {
+ fbiinit1 |= ((ntiles & 0x20) >> 5) << TILES_IN_X_MSB_SHIFT
+ | ((ntiles & 0x1e) >> 1) << TILES_IN_X_SHIFT;
+/* as the only value of importance for us in fbiinit6 is tiles in X (lsb),
+ and as reading fbinit 6 will return crap (see FBIINIT6_DEFAULT) we just
+ write our value. BTW due to the dac unable to read odd number of tiles, this
+ field is always null ... */
+ fbiinit6 = (ntiles & 0x1) << TILES_IN_X_LSB_SHIFT;
+ }
+ else
+ fbiinit1 |= ntiles << TILES_IN_X_SHIFT;
+
+ switch (info->var.bits_per_pixel) {
+ case 16:
+ fbiinit1 |= SEL_SOURCE_VCLK_2X_SEL;
+ break;
+#ifdef EN_24_32_BPP
+ case 24:
+ case 32:
+ /* sst_set_bits(FBIINIT1, SEL_SOURCE_VCLK_2X_DIV2 | EN_24BPP);*/
+ fbiinit1 |= SEL_SOURCE_VCLK_2X_SEL | EN_24BPP;
+ break;
+#endif
+ default:
+ return -EINVAL;
+ }
+ sst_write(FBIINIT1, fbiinit1);
+ if (IS_VOODOO2(par)) {
+ sst_write(FBIINIT6, fbiinit6);
+ fbiinit5=sst_read(FBIINIT5) & FBIINIT5_MASK ;
+ if (info->var.vmode & FB_VMODE_INTERLACED)
+ fbiinit5 |= INTERLACE;
+ if (info->var.vmode & FB_VMODE_DOUBLE)
+ fbiinit5 |= VDOUBLESCAN;
+ if (info->var.sync & FB_SYNC_HOR_HIGH_ACT)
+ fbiinit5 |= HSYNC_HIGH;
+ if (info->var.sync & FB_SYNC_VERT_HIGH_ACT)
+ fbiinit5 |= VSYNC_HIGH;
+ sst_write(FBIINIT5, fbiinit5);
+ }
+ sst_wait_idle();
+ sst_unset_bits(FBIINIT1, VIDEO_RESET);
+ sst_unset_bits(FBIINIT0, FBI_RESET | FIFO_RESET);
+ sst_set_bits(FBIINIT2, EN_DRAM_REFRESH);
+ /* disables fbiinit writes */
+ pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, PCI_EN_FIFO_WR);
+
+ /* set lfbmode : set mode + front buffer for reads/writes
+ + disable pipeline */
+ switch (info->var.bits_per_pixel) {
+ case 16:
+ lfbmode = LFB_565;
+ break;
+#ifdef EN_24_32_BPP
+ case 24:
+ lfbmode = LFB_888;
+ break;
+ case 32:
+ lfbmode = LFB_8888;
+ break;
+#endif
+ default:
+ return -EINVAL;
+ }
+
+#if defined(__BIG_ENDIAN)
+ /* Enable byte-swizzle functionality in hardware.
+ * With this enabled, all our read- and write-accesses to
+ * the voodoo framebuffer can be done in native format, and
+ * the hardware will automatically convert it to little-endian.
+ * - tested on HP-PARISC, Helge Deller <deller@gmx.de> */
+ lfbmode |= ( LFB_WORD_SWIZZLE_WR | LFB_BYTE_SWIZZLE_WR |
+ LFB_WORD_SWIZZLE_RD | LFB_BYTE_SWIZZLE_RD );
+#endif
+
+ if (clipping) {
+ sst_write(LFBMODE, lfbmode | EN_PXL_PIPELINE);
+ /*
+ * Set "clipping" dimensions. If clipping is disabled and
+ * writes to offscreen areas of the framebuffer are performed,
+ * the "behaviour is undefined" (_very_ undefined) - Urs
+ */
+ /* btw, it requires enabling pixel pipeline in LFBMODE .
+ off screen read/writes will just wrap and read/print pixels
+ on screen. Ugly but not that dangerous */
+ f_ddprintk("setting clipping dimensions 0..%d, 0..%d\n",
+ info->var.xres - 1, par->yDim - 1);
+
+ sst_write(CLIP_LEFT_RIGHT, info->var.xres);
+ sst_write(CLIP_LOWY_HIGHY, par->yDim);
+ sst_set_bits(FBZMODE, EN_CLIPPING | EN_RGB_WRITE);
+ } else {
+ /* no clipping : direct access, no pipeline */
+ sst_write(LFBMODE, lfbmode);
+ }
+ return 0;
+}
+
+/**
+ * sstfb_setcolreg - Optional function. Sets a color register.
+ * @regno: hardware colormap register
+ * @red: frame buffer colormap structure
+ * @green: The green value which can be up to 16 bits wide
+ * @blue: The blue value which can be up to 16 bits wide.
+ * @transp: If supported the alpha value which can be up to 16 bits wide.
+ * @info: frame buffer info structure
+ */
+static int sstfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
+ u_int transp, struct fb_info *info)
+{
+ u32 col;
+
+ f_dddprintk("sstfb_setcolreg\n");
+ f_dddprintk("%-2d rgbt: %#x, %#x, %#x, %#x\n",
+ regno, red, green, blue, transp);
+ if (regno >= 16)
+ return -EINVAL;
+
+ red >>= (16 - info->var.red.length);
+ green >>= (16 - info->var.green.length);
+ blue >>= (16 - info->var.blue.length);
+ transp >>= (16 - info->var.transp.length);
+ col = (red << info->var.red.offset)
+ | (green << info->var.green.offset)
+ | (blue << info->var.blue.offset)
+ | (transp << info->var.transp.offset);
+
+ ((u32 *)info->pseudo_palette)[regno] = col;
+
+ return 0;
+}
+
+static int sstfb_ioctl(struct inode *inode, struct file *file,
+ u_int cmd, u_long arg, struct fb_info *info )
+{
+ struct sstfb_par *par = (struct sstfb_par *) info->par;
+ struct pci_dev *sst_dev = par->dev;
+ u32 fbiinit0, tmp, val;
+ u_long p;
+
+ switch (cmd) {
+
+ /* dump current FBIINIT values to system log */
+ case _IO('F', 0xdb): /* 0x46db */
+ return sstfb_dump_regs(info);
+
+ /* fills lfb with #arg pixels */
+ case _IOW('F', 0xdc, u32): /* 0x46dc */
+ if (copy_from_user(&val, (void __user *)arg, sizeof(val)))
+ return -EFAULT;
+ if (val > info->fix.smem_len)
+ val = info->fix.smem_len;
+ printk("filling %#x \n", val);
+ for (p=0 ; p<val; p+=2)
+ writew(p >> 6, info->screen_base + p);
+ return 0;
+
+ /* change VGA pass_through mode */
+ case _IOW('F', 0xdd, u32): /* 0x46dd */
+ if (copy_from_user(&val, (void __user *)arg, sizeof(val)))
+ return -EFAULT;
+ pci_read_config_dword(sst_dev, PCI_INIT_ENABLE, &tmp);
+ pci_write_config_dword(sst_dev, PCI_INIT_ENABLE,
+ tmp | PCI_EN_INIT_WR );
+ fbiinit0 = sst_read (FBIINIT0);
+ if (val) {
+ sst_write(FBIINIT0, fbiinit0 & ~EN_VGA_PASSTHROUGH);
+ iprintk("Disabling VGA pass-through\n");
+ } else {
+ sst_write(FBIINIT0, fbiinit0 | EN_VGA_PASSTHROUGH);
+ iprintk("Enabling VGA pass-through\n");
+ }
+ pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, tmp);
+ return 0;
+
+ /* draw test image */
+ case _IO('F', 0xde): /* 0x46de */
+ f_dprintk("test color display at %d bpp\n",
+ info->var.bits_per_pixel);
+ sstfb_drawdebugimage(info);
+ return 0;
+ }
+ return -EINVAL;
+}
+
+
+/*
+ * Screen-to-Screen BitBlt 2D command (for the bmove fb op.) - Voodoo2 only
+ */
+#if 0
+static void sstfb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
+{
+ struct sstfb_par *par = (struct sstfb_par *) info->par;
+ u32 stride = info->fix.line_length;
+
+ if (!IS_VOODOO2(par))
+ return;
+
+ sst_write(BLTSRCBASEADDR, 0);
+ sst_write(BLTDSTBASEADDR, 0);
+ sst_write(BLTROP, BLTROP_COPY);
+ sst_write(BLTXYSTRIDES, stride | (stride << 16));
+ sst_write(BLTSRCXY, area->sx | (area->sy << 16));
+ sst_write(BLTDSTXY, area->dx | (area->dy << 16));
+ sst_write(BLTSIZE, area->width | (area->height << 16));
+ sst_write(BLTCOMMAND, BLT_SCR2SCR_BITBLT | LAUNCH_BITBLT |
+ (BLT_16BPP_FMT << 3) /* | BIT(14) */ | BIT(15) );
+ sst_wait_idle();
+}
+#endif
+
+
+/*
+ * FillRect 2D command (solidfill or invert (via ROP_XOR)) - Voodoo2 only
+ */
+static void sstfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
+{
+ struct sstfb_par *par = (struct sstfb_par *) info->par;
+ u32 stride = info->fix.line_length;
+
+ if (!IS_VOODOO2(par))
+ return;
+
+ sst_write(BLTCLIPX, info->var.xres);
+ sst_write(BLTCLIPY, info->var.yres);
+
+ sst_write(BLTDSTBASEADDR, 0);
+ sst_write(BLTCOLOR, rect->color);
+ sst_write(BLTROP, rect->rop == ROP_COPY ? BLTROP_COPY : BLTROP_XOR);
+ sst_write(BLTXYSTRIDES, stride | (stride << 16));
+ sst_write(BLTDSTXY, rect->dx | (rect->dy << 16));
+ sst_write(BLTSIZE, rect->width | (rect->height << 16));
+ sst_write(BLTCOMMAND, BLT_RECFILL_BITBLT | LAUNCH_BITBLT
+ | (BLT_16BPP_FMT << 3) /* | BIT(14) */ | BIT(15) | BIT(16) );
+ sst_wait_idle();
+}
+
+
+
+/*
+ * get lfb size
+ */
+static int __devinit sst_get_memsize(struct fb_info *info, __u32 *memsize)
+{
+ u8 __iomem *fbbase_virt = info->screen_base;
+
+ /* force memsize */
+ if ((mem >= 1 ) && (mem <= 4)) {
+ *memsize = (mem * 0x100000);
+ iprintk("supplied memsize: %#x\n", *memsize);
+ return 1;
+ }
+
+ writel(0xdeadbeef, fbbase_virt);
+ writel(0xdeadbeef, fbbase_virt+0x100000);
+ writel(0xdeadbeef, fbbase_virt+0x200000);
+ f_ddprintk("0MB: %#x, 1MB: %#x, 2MB: %#x\n",
+ readl(fbbase_virt), readl(fbbase_virt + 0x100000),
+ readl(fbbase_virt + 0x200000));
+
+ writel(0xabcdef01, fbbase_virt);
+
+ f_ddprintk("0MB: %#x, 1MB: %#x, 2MB: %#x\n",
+ readl(fbbase_virt), readl(fbbase_virt + 0x100000),
+ readl(fbbase_virt + 0x200000));
+
+ /* checks for 4mb lfb, then 2, then defaults to 1 */
+ if (readl(fbbase_virt + 0x200000) == 0xdeadbeef)
+ *memsize = 0x400000;
+ else if (readl(fbbase_virt + 0x100000) == 0xdeadbeef)
+ *memsize = 0x200000;
+ else
+ *memsize = 0x100000;
+ f_ddprintk("detected memsize: %dMB\n", *memsize >> 20);
+ return 1;
+}
+
+
+/*
+ * DAC detection routines
+ */
+
+/* fbi should be idle, and fifo emty and mem disabled */
+/* supposed to detect AT&T ATT20C409 and Ti TVP3409 ramdacs */
+
+static int __devinit sst_detect_att(struct fb_info *info)
+{
+ struct sstfb_par *par = (struct sstfb_par *) info->par;
+ int i, mir, dir;
+
+ for (i=0; i<3; i++) {
+ sst_dac_write(DACREG_WMA, 0); /* backdoor */
+ sst_dac_read(DACREG_RMR); /* read 4 times RMR */
+ sst_dac_read(DACREG_RMR);
+ sst_dac_read(DACREG_RMR);
+ sst_dac_read(DACREG_RMR);
+ /* the fifth time, CR0 is read */
+ sst_dac_read(DACREG_RMR);
+ /* the 6th, manufacturer id register */
+ mir = sst_dac_read(DACREG_RMR);
+ /*the 7th, device ID register */
+ dir = sst_dac_read(DACREG_RMR);
+ f_ddprintk("mir: %#x, dir: %#x\n", mir, dir);
+ if ((mir == DACREG_MIR_ATT ) && (dir == DACREG_DIR_ATT)) {
+ return 1;
+ }
+ }
+ return 0;
+}
+
+static int __devinit sst_detect_ti(struct fb_info *info)
+{
+ struct sstfb_par *par = (struct sstfb_par *) info->par;
+ int i, mir, dir;
+
+ for (i = 0; i<3; i++) {
+ sst_dac_write(DACREG_WMA, 0); /* backdoor */
+ sst_dac_read(DACREG_RMR); /* read 4 times RMR */
+ sst_dac_read(DACREG_RMR);
+ sst_dac_read(DACREG_RMR);
+ sst_dac_read(DACREG_RMR);
+ /* the fifth time, CR0 is read */
+ sst_dac_read(DACREG_RMR);
+ /* the 6th, manufacturer id register */
+ mir = sst_dac_read(DACREG_RMR);
+ /*the 7th, device ID register */
+ dir = sst_dac_read(DACREG_RMR);
+ f_ddprintk("mir: %#x, dir: %#x\n", mir, dir);
+ if ((mir == DACREG_MIR_TI ) && (dir == DACREG_DIR_TI)) {
+ return 1;
+ }
+ }
+ return 0;
+}
+
+/*
+ * try to detect ICS5342 ramdac
+ * we get the 1st byte (M value) of preset f1,f7 and fB
+ * why those 3 ? mmmh... for now, i'll do it the glide way...
+ * and ask questions later. anyway, it seems that all the freq registers are
+ * realy at their default state (cf specs) so i ask again, why those 3 regs ?
+ * mmmmh.. it seems that's much more ugly than i thought. we use f0 and fA for
+ * pll programming, so in fact, we *hope* that the f1, f7 & fB won't be
+ * touched...
+ * is it realy safe ? how can i reset this ramdac ? geee...
+ */
+static int __devinit sst_detect_ics(struct fb_info *info)
+{
+ struct sstfb_par *par = (struct sstfb_par *) info->par;
+ int m_clk0_1, m_clk0_7, m_clk1_b;
+ int n_clk0_1, n_clk0_7, n_clk1_b;
+ int i;
+
+ for (i = 0; i<5; i++ ) {
+ sst_dac_write(DACREG_ICS_PLLRMA, 0x1); /* f1 */
+ m_clk0_1 = sst_dac_read(DACREG_ICS_PLLDATA);
+ n_clk0_1 = sst_dac_read(DACREG_ICS_PLLDATA);
+ sst_dac_write(DACREG_ICS_PLLRMA, 0x7); /* f7 */
+ m_clk0_7 = sst_dac_read(DACREG_ICS_PLLDATA);
+ n_clk0_7 = sst_dac_read(DACREG_ICS_PLLDATA);
+ sst_dac_write(DACREG_ICS_PLLRMA, 0xb); /* fB */
+ m_clk1_b= sst_dac_read(DACREG_ICS_PLLDATA);
+ n_clk1_b= sst_dac_read(DACREG_ICS_PLLDATA);
+ f_ddprintk("m_clk0_1: %#x, m_clk0_7: %#x, m_clk1_b: %#x\n",
+ m_clk0_1, m_clk0_7, m_clk1_b);
+ f_ddprintk("n_clk0_1: %#x, n_clk0_7: %#x, n_clk1_b: %#x\n",
+ n_clk0_1, n_clk0_7, n_clk1_b);
+ if (( m_clk0_1 == DACREG_ICS_PLL_CLK0_1_INI)
+ && (m_clk0_7 == DACREG_ICS_PLL_CLK0_7_INI)
+ && (m_clk1_b == DACREG_ICS_PLL_CLK1_B_INI)) {
+ return 1;
+ }
+ }
+ return 0;
+}
+
+
+/*
+ * gfx, video, pci fifo should be reset, dram refresh disabled
+ * see detect_dac
+ */
+
+static int sst_set_pll_att_ti(struct fb_info *info,
+ const struct pll_timing *t, const int clock)
+{
+ struct sstfb_par *par = (struct sstfb_par *) info->par;
+ u8 cr0, cc;
+
+ /* enable indexed mode */
+ sst_dac_write(DACREG_WMA, 0); /* backdoor */
+ sst_dac_read(DACREG_RMR); /* 1 time: RMR */
+ sst_dac_read(DACREG_RMR); /* 2 RMR */
+ sst_dac_read(DACREG_RMR); /* 3 // */
+ sst_dac_read(DACREG_RMR); /* 4 // */
+ cr0 = sst_dac_read(DACREG_RMR); /* 5 CR0 */
+
+ sst_dac_write(DACREG_WMA, 0);
+ sst_dac_read(DACREG_RMR);
+ sst_dac_read(DACREG_RMR);
+ sst_dac_read(DACREG_RMR);
+ sst_dac_read(DACREG_RMR);
+ sst_dac_write(DACREG_RMR, (cr0 & 0xf0)
+ | DACREG_CR0_EN_INDEXED
+ | DACREG_CR0_8BIT
+ | DACREG_CR0_PWDOWN );
+ /* so, now we are in indexed mode . dunno if its common, but
+ i find this way of doing things a little bit weird :p */
+
+ udelay(300);
+ cc = dac_i_read(DACREG_CC_I);
+ switch (clock) {
+ case VID_CLOCK:
+ dac_i_write(DACREG_AC0_I, t->m);
+ dac_i_write(DACREG_AC1_I, t->p << 6 | t->n);
+ dac_i_write(DACREG_CC_I,
+ (cc & 0x0f) | DACREG_CC_CLKA | DACREG_CC_CLKA_C);
+ break;
+ case GFX_CLOCK:
+ dac_i_write(DACREG_BD0_I, t->m);
+ dac_i_write(DACREG_BD1_I, t->p << 6 | t->n);
+ dac_i_write(DACREG_CC_I,
+ (cc & 0xf0) | DACREG_CC_CLKB | DACREG_CC_CLKB_D);
+ break;
+ default:
+ dprintk("%s: wrong clock code '%d'\n",
+ __FUNCTION__, clock);
+ return 0;
+ }
+ udelay(300);
+
+ /* power up the dac & return to "normal" non-indexed mode */
+ dac_i_write(DACREG_CR0_I,
+ cr0 & ~DACREG_CR0_PWDOWN & ~DACREG_CR0_EN_INDEXED);
+ return 1;
+}
+
+static int sst_set_pll_ics(struct fb_info *info,
+ const struct pll_timing *t, const int clock)
+{
+ struct sstfb_par *par = (struct sstfb_par *) info->par;
+ u8 pll_ctrl;
+
+ sst_dac_write(DACREG_ICS_PLLRMA, DACREG_ICS_PLL_CTRL);
+ pll_ctrl = sst_dac_read(DACREG_ICS_PLLDATA);
+ switch(clock) {
+ case VID_CLOCK:
+ sst_dac_write(DACREG_ICS_PLLWMA, 0x0); /* CLK0, f0 */
+ sst_dac_write(DACREG_ICS_PLLDATA, t->m);
+ sst_dac_write(DACREG_ICS_PLLDATA, t->p << 5 | t->n);
+ /* selects freq f0 for clock 0 */
+ sst_dac_write(DACREG_ICS_PLLWMA, DACREG_ICS_PLL_CTRL);
+ sst_dac_write(DACREG_ICS_PLLDATA,
+ (pll_ctrl & 0xd8)
+ | DACREG_ICS_CLK0
+ | DACREG_ICS_CLK0_0);
+ break;
+ case GFX_CLOCK :
+ sst_dac_write(DACREG_ICS_PLLWMA, 0xa); /* CLK1, fA */
+ sst_dac_write(DACREG_ICS_PLLDATA, t->m);
+ sst_dac_write(DACREG_ICS_PLLDATA, t->p << 5 | t->n);
+ /* selects freq fA for clock 1 */
+ sst_dac_write(DACREG_ICS_PLLWMA, DACREG_ICS_PLL_CTRL);
+ sst_dac_write(DACREG_ICS_PLLDATA,
+ (pll_ctrl & 0xef) | DACREG_ICS_CLK1_A);
+ break;
+ default:
+ dprintk("%s: wrong clock code '%d'\n",
+ __FUNCTION__, clock);
+ return 0;
+ }
+ udelay(300);
+ return 1;
+}
+
+static void sst_set_vidmod_att_ti(struct fb_info *info, const int bpp)
+{
+ struct sstfb_par *par = (struct sstfb_par *) info->par;
+ u8 cr0;
+
+ sst_dac_write(DACREG_WMA, 0); /* backdoor */
+ sst_dac_read(DACREG_RMR); /* read 4 times RMR */
+ sst_dac_read(DACREG_RMR);
+ sst_dac_read(DACREG_RMR);
+ sst_dac_read(DACREG_RMR);
+ /* the fifth time, CR0 is read */
+ cr0 = sst_dac_read(DACREG_RMR);
+
+ sst_dac_write(DACREG_WMA, 0); /* backdoor */
+ sst_dac_read(DACREG_RMR); /* read 4 times RMR */
+ sst_dac_read(DACREG_RMR);
+ sst_dac_read(DACREG_RMR);
+ sst_dac_read(DACREG_RMR);
+ /* cr0 */
+ switch(bpp) {
+ case 16:
+ sst_dac_write(DACREG_RMR, (cr0 & 0x0f) | DACREG_CR0_16BPP);
+ break;
+#ifdef EN_24_32_BPP
+ case 24:
+ case 32:
+ sst_dac_write(DACREG_RMR, (cr0 & 0x0f) | DACREG_CR0_24BPP);
+ break;
+#endif
+ default:
+ dprintk("%s: bad depth '%u'\n", __FUNCTION__, bpp);
+ break;
+ }
+}
+
+static void sst_set_vidmod_ics(struct fb_info *info, const int bpp)
+{
+ struct sstfb_par *par = (struct sstfb_par *) info->par;
+
+ switch(bpp) {
+ case 16:
+ sst_dac_write(DACREG_ICS_CMD, DACREG_ICS_CMD_16BPP);
+ break;
+#ifdef EN_24_32_BPP
+ case 24:
+ case 32:
+ sst_dac_write(DACREG_ICS_CMD, DACREG_ICS_CMD_24BPP);
+ break;
+#endif
+ default:
+ dprintk("%s: bad depth '%u'\n", __FUNCTION__, bpp);
+ break;
+ }
+}
+
+/*
+ * detect dac type
+ * prerequisite : write to FbiInitx enabled, video and fbi and pci fifo reset,
+ * dram refresh disabled, FbiInit remaped.
+ * TODO: mmh.. maybe i shoud put the "prerequisite" in the func ...
+ */
+
+
+static struct dac_switch dacs[] __devinitdata = {
+ { .name = "TI TVP3409",
+ .detect = sst_detect_ti,
+ .set_pll = sst_set_pll_att_ti,
+ .set_vidmod = sst_set_vidmod_att_ti },
+
+ { .name = "AT&T ATT20C409",
+ .detect = sst_detect_att,
+ .set_pll = sst_set_pll_att_ti,
+ .set_vidmod = sst_set_vidmod_att_ti },
+ { .name = "ICS ICS5342",
+ .detect = sst_detect_ics,
+ .set_pll = sst_set_pll_ics,
+ .set_vidmod = sst_set_vidmod_ics },
+};
+
+static int __devinit sst_detect_dactype(struct fb_info *info, struct sstfb_par *par)
+{
+ int i, ret = 0;
+
+ for (i=0; i<sizeof(dacs)/sizeof(dacs[0]); i++) {
+ ret = dacs[i].detect(info);
+ if (ret) break;
+ }
+ if (!ret)
+ return 0;
+ f_dprintk("%s found %s\n", __FUNCTION__, dacs[i].name);
+ par->dac_sw = dacs[i];
+ return 1;
+}
+
+/*
+ * Internal Routines
+ */
+static int __devinit sst_init(struct fb_info *info, struct sstfb_par *par)
+{
+ u32 fbiinit0, fbiinit1, fbiinit4;
+ struct pci_dev *dev = par->dev;
+ struct pll_timing gfx_timings;
+ struct sst_spec *spec;
+ int Fout;
+
+ spec = &voodoo_spec[par->type];
+ f_ddprintk(" fbiinit0 fbiinit1 fbiinit2 fbiinit3 fbiinit4 "
+ " fbiinit6\n");
+ f_ddprintk("%0#10x %0#10x %0#10x %0#10x %0#10x %0#10x\n",
+ sst_read(FBIINIT0), sst_read(FBIINIT1), sst_read(FBIINIT2),
+ sst_read(FBIINIT3), sst_read(FBIINIT4), sst_read(FBIINIT6));
+ /* disable video clock */
+ pci_write_config_dword(dev, PCI_VCLK_DISABLE, 0);
+
+ /* enable writing to init registers, disable pci fifo */
+ pci_write_config_dword(dev, PCI_INIT_ENABLE, PCI_EN_INIT_WR);
+ /* reset video */
+ sst_set_bits(FBIINIT1, VIDEO_RESET);
+ sst_wait_idle();
+ /* reset gfx + pci fifo */
+ sst_set_bits(FBIINIT0, FBI_RESET | FIFO_RESET);
+ sst_wait_idle();
+
+ /* unreset fifo */
+ /*sst_unset_bits(FBIINIT0, FIFO_RESET);
+ sst_wait_idle();*/
+ /* unreset FBI */
+ /*sst_unset_bits(FBIINIT0, FBI_RESET);
+ sst_wait_idle();*/
+
+ /* disable dram refresh */
+ sst_unset_bits(FBIINIT2, EN_DRAM_REFRESH);
+ sst_wait_idle();
+ /* remap fbinit2/3 to dac */
+ pci_write_config_dword(dev, PCI_INIT_ENABLE,
+ PCI_EN_INIT_WR | PCI_REMAP_DAC );
+ /* detect dac type */
+ if (!sst_detect_dactype(info, par)) {
+ eprintk("Unknown dac type\n");
+ //FIXME watch it: we are not in a safe state, bad bad bad.
+ return 0;
+ }
+
+ /* set graphic clock */
+ par->gfx_clock = spec->default_gfx_clock;
+ if ((gfxclk >10 ) && (gfxclk < spec->max_gfxclk)) {
+ iprintk("Using supplied graphic freq : %dMHz\n", gfxclk);
+ par->gfx_clock = gfxclk *1000;
+ } else if (gfxclk) {
+ wprintk ("%dMhz is way out of spec! Using default\n", gfxclk);
+ }
+
+ sst_calc_pll(par->gfx_clock, &Fout, &gfx_timings);
+ par->dac_sw.set_pll(info, &gfx_timings, GFX_CLOCK);
+
+ /* disable fbiinit remap */
+ pci_write_config_dword(dev, PCI_INIT_ENABLE,
+ PCI_EN_INIT_WR| PCI_EN_FIFO_WR );
+ /* defaults init registers */
+ /* FbiInit0: unreset gfx, unreset fifo */
+ fbiinit0 = FBIINIT0_DEFAULT;
+ fbiinit1 = FBIINIT1_DEFAULT;
+ fbiinit4 = FBIINIT4_DEFAULT;
+ if (vgapass)
+ fbiinit0 &= ~EN_VGA_PASSTHROUGH;
+ else
+ fbiinit0 |= EN_VGA_PASSTHROUGH;
+ if (slowpci) {
+ fbiinit1 |= SLOW_PCI_WRITES;
+ fbiinit4 |= SLOW_PCI_READS;
+ } else {
+ fbiinit1 &= ~SLOW_PCI_WRITES;
+ fbiinit4 &= ~SLOW_PCI_READS;
+ }
+ sst_write(FBIINIT0, fbiinit0);
+ sst_wait_idle();
+ sst_write(FBIINIT1, fbiinit1);
+ sst_wait_idle();
+ sst_write(FBIINIT2, FBIINIT2_DEFAULT);
+ sst_wait_idle();
+ sst_write(FBIINIT3, FBIINIT3_DEFAULT);
+ sst_wait_idle();
+ sst_write(FBIINIT4, fbiinit4);
+ sst_wait_idle();
+ if (IS_VOODOO2(par)) {
+ sst_write(FBIINIT6, FBIINIT6_DEFAULT);
+ sst_wait_idle();
+ }
+
+ pci_write_config_dword(dev, PCI_INIT_ENABLE, PCI_EN_FIFO_WR);
+ pci_write_config_dword(dev, PCI_VCLK_ENABLE, 0);
+ return 1;
+}
+
+static void __devexit sst_shutdown(struct fb_info *info)
+{
+ struct sstfb_par *par = (struct sstfb_par *) info->par;
+ struct pci_dev *dev = par->dev;
+ struct pll_timing gfx_timings;
+ int Fout;
+
+ /* reset video, gfx, fifo, disable dram + remap fbiinit2/3 */
+ pci_write_config_dword(dev, PCI_INIT_ENABLE, PCI_EN_INIT_WR);
+ sst_set_bits(FBIINIT1, VIDEO_RESET | EN_BLANKING);
+ sst_unset_bits(FBIINIT2, EN_DRAM_REFRESH);
+ sst_set_bits(FBIINIT0, FBI_RESET | FIFO_RESET);
+ sst_wait_idle();
+ pci_write_config_dword(dev, PCI_INIT_ENABLE,
+ PCI_EN_INIT_WR | PCI_REMAP_DAC);
+ /* set 20Mhz gfx clock */
+ sst_calc_pll(20000, &Fout, &gfx_timings);
+ par->dac_sw.set_pll(info, &gfx_timings, GFX_CLOCK);
+ /* TODO maybe shutdown the dac, vrefresh and so on... */
+ pci_write_config_dword(dev, PCI_INIT_ENABLE,
+ PCI_EN_INIT_WR);
+ sst_unset_bits(FBIINIT0, FBI_RESET | FIFO_RESET | EN_VGA_PASSTHROUGH);
+ pci_write_config_dword(dev, PCI_VCLK_DISABLE,0);
+ /* maybe keep fbiinit* and PCI_INIT_enable in the fb_info struct
+ * from start ? */
+ pci_write_config_dword(dev, PCI_INIT_ENABLE, 0);
+
+}
+
+/*
+ * Interface to the world
+ */
+#ifndef MODULE
+static int __init sstfb_setup(char *options)
+{
+ char *this_opt;
+
+ if (!options || !*options)
+ return 0;
+
+ while ((this_opt = strsep(&options, ",")) != NULL) {
+ if (!*this_opt) continue;
+
+ f_ddprintk("option %s\n", this_opt);
+
+ if (!strcmp(this_opt, "vganopass"))
+ vgapass = 0;
+ else if (!strcmp(this_opt, "vgapass"))
+ vgapass = 1;
+ else if (!strcmp(this_opt, "clipping"))
+ clipping = 1;
+ else if (!strcmp(this_opt, "noclipping"))
+ clipping = 0;
+ else if (!strcmp(this_opt, "fastpci"))
+ slowpci = 0;
+ else if (!strcmp(this_opt, "slowpci"))
+ slowpci = 1;
+ else if (!strncmp(this_opt, "mem:",4))
+ mem = simple_strtoul (this_opt+4, NULL, 0);
+ else if (!strncmp(this_opt, "gfxclk:",7))
+ gfxclk = simple_strtoul (this_opt+7, NULL, 0);
+ else
+ mode_option = this_opt;
+ }
+ return 0;
+}
+#endif
+
+static struct fb_ops sstfb_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = sstfb_check_var,
+ .fb_set_par = sstfb_set_par,
+ .fb_setcolreg = sstfb_setcolreg,
+ .fb_fillrect = cfb_fillrect, /* sstfb_fillrect */
+ .fb_copyarea = cfb_copyarea, /* sstfb_copyarea */
+ .fb_imageblit = cfb_imageblit,
+ .fb_cursor = soft_cursor,
+ .fb_ioctl = sstfb_ioctl,
+};
+
+static int __devinit sstfb_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct fb_info *info;
+ struct fb_fix_screeninfo *fix;
+ struct sstfb_par *par;
+ struct sst_spec *spec;
+ int err;
+
+ struct all_info {
+ struct fb_info info;
+ struct sstfb_par par;
+ u32 pseudo_palette[16];
+ } *all;
+
+ /* Enable device in PCI config. */
+ if ((err=pci_enable_device(pdev))) {
+ eprintk("cannot enable device\n");
+ return err;
+ }
+
+ /* Allocate the fb and par structures. */
+ all = kmalloc(sizeof(*all), GFP_KERNEL);
+ if (!all)
+ return -ENOMEM;
+ memset(all, 0, sizeof(*all));
+ pci_set_drvdata(pdev, all);
+
+ info = &all->info;
+ par = info->par = &all->par;
+ fix = &info->fix;
+
+ par->type = id->driver_data;
+ spec = &voodoo_spec[par->type];
+ f_ddprintk("found device : %s\n", spec->name);
+
+ par->dev = pdev;
+ pci_read_config_byte(pdev, PCI_REVISION_ID, &par->revision);
+
+ fix->mmio_start = pci_resource_start(pdev,0);
+ fix->mmio_len = 0x400000;
+ fix->smem_start = fix->mmio_start + 0x400000;
+
+ if (!request_mem_region(fix->mmio_start, fix->mmio_len, "sstfb MMIO")) {
+ eprintk("cannot reserve mmio memory\n");
+ goto fail_mmio_mem;
+ }
+
+ if (!request_mem_region(fix->smem_start, 0x400000,"sstfb FB")) {
+ eprintk("cannot reserve fb memory\n");
+ goto fail_fb_mem;
+ }
+
+ par->mmio_vbase = ioremap_nocache(fix->mmio_start,
+ fix->mmio_len);
+ if (!par->mmio_vbase) {
+ eprintk("cannot remap register area %#lx\n",
+ fix->mmio_start);
+ goto fail_mmio_remap;
+ }
+ info->screen_base = ioremap_nocache(fix->smem_start, 0x400000);
+ if (!info->screen_base) {
+ eprintk("cannot remap framebuffer %#lx\n",
+ fix->smem_start);
+ goto fail_fb_remap;
+ }
+
+ if (!sst_init(info, par)) {
+ eprintk("Init failed\n");
+ goto fail;
+ }
+ sst_get_memsize(info, &fix->smem_len);
+ strlcpy(fix->id, spec->name, sizeof(fix->id));
+
+ iprintk("%s (revision %d) with %s dac\n",
+ fix->id, par->revision, par->dac_sw.name);
+ iprintk("framebuffer at %#lx, mapped to 0x%p, size %dMB\n",
+ fix->smem_start, info->screen_base,
+ fix->smem_len >> 20);
+
+ f_ddprintk("regbase_virt: %#lx\n", par->mmio_vbase);
+ f_ddprintk("membase_phys: %#lx\n", fix->smem_start);
+ f_ddprintk("fbbase_virt: %p\n", info->screen_base);
+
+ info->flags = FBINFO_DEFAULT;
+ info->fbops = &sstfb_ops;
+ info->pseudo_palette = &all->pseudo_palette;
+
+ fix->type = FB_TYPE_PACKED_PIXELS;
+ fix->visual = FB_VISUAL_TRUECOLOR;
+ fix->accel = FB_ACCEL_NONE; /* FIXME */
+ /*
+ * According to the specs, the linelength must be of 1024 *pixels*
+ * and the 24bpp mode is in fact a 32 bpp mode.
+ */
+ fix->line_length = 2048; /* default value, for 24 or 32bit: 4096 */
+
+ if ( mode_option &&
+ fb_find_mode(&info->var, info, mode_option, NULL, 0, NULL, 16)) {
+ eprintk("can't set supplied video mode. Using default\n");
+ info->var = sstfb_default;
+ } else
+ info->var = sstfb_default;
+
+ if (sstfb_check_var(&info->var, info)) {
+ eprintk("invalid default video mode.\n");
+ goto fail;
+ }
+
+ if (sstfb_set_par(info)) {
+ eprintk("can't set default video mode.\n");
+ goto fail;
+ }
+
+ fb_alloc_cmap(&info->cmap, 256, 0);
+
+ /* register fb */
+ info->device = &pdev->dev;
+ if (register_framebuffer(info) < 0) {
+ eprintk("can't register framebuffer.\n");
+ goto fail;
+ }
+
+ if (1) /* set to 0 to see an initial bitmap instead */
+ sstfb_clear_screen(info);
+ else
+ sstfb_drawdebugimage(info);
+
+ printk(KERN_INFO "fb%d: %s frame buffer device at 0x%p\n",
+ info->node, fix->id, info->screen_base);
+
+ return 0;
+
+fail:
+ iounmap(info->screen_base);
+fail_fb_remap:
+ iounmap(par->mmio_vbase);
+fail_mmio_remap:
+ release_mem_region(fix->smem_start, 0x400000);
+fail_fb_mem:
+ release_mem_region(fix->mmio_start, info->fix.mmio_len);
+fail_mmio_mem:
+ kfree(info);
+ return -ENXIO; /* no voodoo detected */
+}
+
+static void __devexit sstfb_remove(struct pci_dev *pdev)
+{
+ struct sstfb_par *par;
+ struct fb_info *info;
+
+ info = pci_get_drvdata(pdev);
+ par = (struct sstfb_par *) info->par;
+
+ sst_shutdown(info);
+ unregister_framebuffer(info);
+ iounmap(info->screen_base);
+ iounmap(par->mmio_vbase);
+ release_mem_region(info->fix.smem_start, 0x400000);
+ release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
+ kfree(info);
+}
+
+
+static struct pci_device_id sstfb_id_tbl[] = {
+ { PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_VOODOO1 },
+ { PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO2,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_VOODOO2 },
+ { 0 },
+};
+
+static struct pci_driver sstfb_driver = {
+ .name = "sstfb",
+ .id_table = sstfb_id_tbl,
+ .probe = sstfb_probe,
+ .remove = __devexit_p(sstfb_remove),
+};
+
+
+static int __devinit sstfb_init(void)
+{
+#ifndef MODULE
+ char *option = NULL;
+
+ if (fb_get_options("sstfb", &option))
+ return -ENODEV;
+ sstfb_setup(option);
+#endif
+ return pci_register_driver(&sstfb_driver);
+}
+
+#ifdef MODULE
+static void __devexit sstfb_exit(void)
+{
+ pci_unregister_driver(&sstfb_driver);
+}
+#endif
+
+
+/*
+ * testing and debugging functions
+ */
+
+static int sstfb_dump_regs(struct fb_info *info)
+{
+#ifdef SST_DEBUG
+ static struct { u32 reg ; const char *reg_name;} pci_regs[] = {
+ { PCI_INIT_ENABLE, "initenable"},
+ { PCI_VCLK_ENABLE, "enable vclk"},
+ { PCI_VCLK_DISABLE, "disable vclk"},
+ };
+
+ static struct { u32 reg ; const char *reg_name;} sst_regs[] = {
+ {FBIINIT0,"fbiinit0"},
+ {FBIINIT1,"fbiinit1"},
+ {FBIINIT2,"fbiinit2"},
+ {FBIINIT3,"fbiinit3"},
+ {FBIINIT4,"fbiinit4"},
+ {FBIINIT5,"fbiinit5"},
+ {FBIINIT6,"fbiinit6"},
+ {FBIINIT7,"fbiinit7"},
+ {LFBMODE,"lfbmode"},
+ {FBZMODE,"fbzmode"},
+ };
+
+ const int pci_s = sizeof(pci_regs)/sizeof(pci_regs[0]);
+ const int sst_s = sizeof(sst_regs)/sizeof(sst_regs[0]);
+ struct sstfb_par *par = (struct sstfb_par *) info->par;
+ struct pci_dev *dev = par->dev;
+ u32 pci_res[pci_s];
+ u32 sst_res[sst_s];
+ int i;
+
+ for (i=0; i<pci_s; i++) {
+ pci_read_config_dword(dev, pci_regs[i].reg, &pci_res[i]);
+ }
+ for (i=0; i<sst_s; i++) {
+ sst_res[i] = sst_read(sst_regs[i].reg);
+ }
+
+ dprintk("hardware register dump:\n");
+ for (i=0; i<pci_s; i++) {
+ dprintk("%s %0#10x\n", pci_regs[i].reg_name, pci_res[i]);
+ }
+ for (i=0; i<sst_s; i++) {
+ dprintk("%s %0#10x\n", sst_regs[i].reg_name, sst_res[i]);
+ }
+ return 0;
+#else
+ return -EINVAL;
+#endif
+}
+
+static void sstfb_fillrect_softw( struct fb_info *info, const struct fb_fillrect *rect)
+{
+ u8 __iomem *fbbase_virt = info->screen_base;
+ int x, y, w = info->var.bits_per_pixel == 16 ? 2 : 4;
+ u32 color = rect->color, height = rect->height;
+ u8 __iomem *p;
+
+ if (w==2) color |= color<<16;
+ for (y=rect->dy; height; y++, height--) {
+ p = fbbase_virt + y*info->fix.line_length + rect->dx*w;
+ x = rect->width;
+ if (w==2) x>>=1;
+ while (x) {
+ writel(color, p);
+ p += 4;
+ x--;
+ }
+ }
+}
+
+static void sstfb_drawrect_XY( struct fb_info *info, int x, int y,
+ int w, int h, int color, int hwfunc)
+{
+ struct fb_fillrect rect;
+ rect.dx = x;
+ rect.dy = y;
+ rect.height = h;
+ rect.width = w;
+ rect.color = color;
+ rect.rop = ROP_COPY;
+ if (hwfunc)
+ sstfb_fillrect(info, &rect);
+ else
+ sstfb_fillrect_softw(info, &rect);
+}
+
+/* print some squares on the fb */
+static void sstfb_drawdebugimage(struct fb_info *info)
+{
+ static int idx;
+
+ /* clear screen */
+ sstfb_clear_screen(info);
+
+ idx = (idx+1) & 1;
+
+ /* white rect */
+ sstfb_drawrect_XY(info, 0, 0, 50, 50, 0xffff, idx);
+
+ /* blue rect */
+ sstfb_drawrect_XY(info, 50, 50, 50, 50, 0x001f, idx);
+
+ /* green rect */
+ sstfb_drawrect_XY(info, 100, 100, 80, 80, 0x07e0, idx);
+
+ /* red rect */
+ sstfb_drawrect_XY(info, 250, 250, 120, 100, 0xf800, idx);
+}
+
+module_init(sstfb_init);
+
+#ifdef MODULE
+module_exit(sstfb_exit);
+#endif
+
+MODULE_AUTHOR("(c) 2000,2002 Ghozlane Toumi <gtoumi@laposte.net>");
+MODULE_DESCRIPTION("FBDev driver for 3dfx Voodoo Graphics and Voodoo2 based video boards");
+MODULE_LICENSE("GPL");
+
+module_param(mem, int, 0);
+MODULE_PARM_DESC(mem, "Size of frame buffer memory in MB (1, 2, 4 MB, default=autodetect)");
+module_param(vgapass, bool, 0);
+MODULE_PARM_DESC(vgapass, "Enable VGA PassThrough mode (0 or 1) (default=0)");
+module_param(clipping, bool, 0);
+MODULE_PARM_DESC(clipping, "Enable clipping (slower, safer) (0 or 1) (default=1)");
+module_param(gfxclk, int, 0);
+MODULE_PARM_DESC(gfxclk, "Force graphic chip frequency in MHz. DANGEROUS. (default=auto)");
+module_param(slowpci, bool, 0);
+MODULE_PARM_DESC(slowpci, "Uses slow PCI settings (0 or 1) (default=0)");
+