summaryrefslogtreecommitdiffstats
path: root/fs/direct-io.c
diff options
context:
space:
mode:
Diffstat (limited to 'fs/direct-io.c')
-rw-r--r--fs/direct-io.c123
1 files changed, 95 insertions, 28 deletions
diff --git a/fs/direct-io.c b/fs/direct-io.c
index e82adc2debb7..7600aacf531d 100644
--- a/fs/direct-io.c
+++ b/fs/direct-io.c
@@ -82,6 +82,8 @@ struct dio {
int reap_counter; /* rate limit reaping */
get_block_t *get_block; /* block mapping function */
dio_iodone_t *end_io; /* IO completion function */
+ dio_submit_t *submit_io; /* IO submition function */
+ loff_t logical_offset_in_bio; /* current first logical block in bio */
sector_t final_block_in_bio; /* current final block in bio + 1 */
sector_t next_block_for_io; /* next block to be put under IO,
in dio_blocks units */
@@ -96,6 +98,7 @@ struct dio {
unsigned cur_page_offset; /* Offset into it, in bytes */
unsigned cur_page_len; /* Nr of bytes at cur_page_offset */
sector_t cur_page_block; /* Where it starts */
+ loff_t cur_page_fs_offset; /* Offset in file */
/* BIO completion state */
spinlock_t bio_lock; /* protects BIO fields below */
@@ -300,6 +303,26 @@ static void dio_bio_end_io(struct bio *bio, int error)
spin_unlock_irqrestore(&dio->bio_lock, flags);
}
+/**
+ * dio_end_io - handle the end io action for the given bio
+ * @bio: The direct io bio thats being completed
+ * @error: Error if there was one
+ *
+ * This is meant to be called by any filesystem that uses their own dio_submit_t
+ * so that the DIO specific endio actions are dealt with after the filesystem
+ * has done it's completion work.
+ */
+void dio_end_io(struct bio *bio, int error)
+{
+ struct dio *dio = bio->bi_private;
+
+ if (dio->is_async)
+ dio_bio_end_aio(bio, error);
+ else
+ dio_bio_end_io(bio, error);
+}
+EXPORT_SYMBOL_GPL(dio_end_io);
+
static int
dio_bio_alloc(struct dio *dio, struct block_device *bdev,
sector_t first_sector, int nr_vecs)
@@ -316,6 +339,7 @@ dio_bio_alloc(struct dio *dio, struct block_device *bdev,
bio->bi_end_io = dio_bio_end_io;
dio->bio = bio;
+ dio->logical_offset_in_bio = dio->cur_page_fs_offset;
return 0;
}
@@ -340,10 +364,15 @@ static void dio_bio_submit(struct dio *dio)
if (dio->is_async && dio->rw == READ)
bio_set_pages_dirty(bio);
- submit_bio(dio->rw, bio);
+ if (dio->submit_io)
+ dio->submit_io(dio->rw, bio, dio->inode,
+ dio->logical_offset_in_bio);
+ else
+ submit_bio(dio->rw, bio);
dio->bio = NULL;
dio->boundary = 0;
+ dio->logical_offset_in_bio = 0;
}
/*
@@ -603,10 +632,26 @@ static int dio_send_cur_page(struct dio *dio)
int ret = 0;
if (dio->bio) {
+ loff_t cur_offset = dio->block_in_file << dio->blkbits;
+ loff_t bio_next_offset = dio->logical_offset_in_bio +
+ dio->bio->bi_size;
+
/*
- * See whether this new request is contiguous with the old
+ * See whether this new request is contiguous with the old.
+ *
+ * Btrfs cannot handl having logically non-contiguous requests
+ * submitted. For exmple if you have
+ *
+ * Logical: [0-4095][HOLE][8192-12287]
+ * Phyiscal: [0-4095] [4096-8181]
+ *
+ * We cannot submit those pages together as one BIO. So if our
+ * current logical offset in the file does not equal what would
+ * be the next logical offset in the bio, submit the bio we
+ * have.
*/
- if (dio->final_block_in_bio != dio->cur_page_block)
+ if (dio->final_block_in_bio != dio->cur_page_block ||
+ cur_offset != bio_next_offset)
dio_bio_submit(dio);
/*
* Submit now if the underlying fs is about to perform a
@@ -701,6 +746,7 @@ submit_page_section(struct dio *dio, struct page *page,
dio->cur_page_offset = offset;
dio->cur_page_len = len;
dio->cur_page_block = blocknr;
+ dio->cur_page_fs_offset = dio->block_in_file << dio->blkbits;
out:
return ret;
}
@@ -935,7 +981,7 @@ static ssize_t
direct_io_worker(int rw, struct kiocb *iocb, struct inode *inode,
const struct iovec *iov, loff_t offset, unsigned long nr_segs,
unsigned blkbits, get_block_t get_block, dio_iodone_t end_io,
- struct dio *dio)
+ dio_submit_t submit_io, struct dio *dio)
{
unsigned long user_addr;
unsigned long flags;
@@ -952,6 +998,7 @@ direct_io_worker(int rw, struct kiocb *iocb, struct inode *inode,
dio->get_block = get_block;
dio->end_io = end_io;
+ dio->submit_io = submit_io;
dio->final_block_in_bio = -1;
dio->next_block_for_io = -1;
@@ -1008,7 +1055,7 @@ direct_io_worker(int rw, struct kiocb *iocb, struct inode *inode,
}
} /* end iovec loop */
- if (ret == -ENOTBLK && (rw & WRITE)) {
+ if (ret == -ENOTBLK) {
/*
* The remaining part of the request will be
* be handled by buffered I/O when we return
@@ -1087,30 +1134,11 @@ direct_io_worker(int rw, struct kiocb *iocb, struct inode *inode,
return ret;
}
-/*
- * This is a library function for use by filesystem drivers.
- *
- * The locking rules are governed by the flags parameter:
- * - if the flags value contains DIO_LOCKING we use a fancy locking
- * scheme for dumb filesystems.
- * For writes this function is called under i_mutex and returns with
- * i_mutex held, for reads, i_mutex is not held on entry, but it is
- * taken and dropped again before returning.
- * For reads and writes i_alloc_sem is taken in shared mode and released
- * on I/O completion (which may happen asynchronously after returning to
- * the caller).
- *
- * - if the flags value does NOT contain DIO_LOCKING we don't use any
- * internal locking but rather rely on the filesystem to synchronize
- * direct I/O reads/writes versus each other and truncate.
- * For reads and writes both i_mutex and i_alloc_sem are not held on
- * entry and are never taken.
- */
ssize_t
-__blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode,
+__blockdev_direct_IO_newtrunc(int rw, struct kiocb *iocb, struct inode *inode,
struct block_device *bdev, const struct iovec *iov, loff_t offset,
unsigned long nr_segs, get_block_t get_block, dio_iodone_t end_io,
- int flags)
+ dio_submit_t submit_io, int flags)
{
int seg;
size_t size;
@@ -1197,11 +1225,49 @@ __blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode,
(end > i_size_read(inode)));
retval = direct_io_worker(rw, iocb, inode, iov, offset,
- nr_segs, blkbits, get_block, end_io, dio);
+ nr_segs, blkbits, get_block, end_io,
+ submit_io, dio);
+
+out:
+ return retval;
+}
+EXPORT_SYMBOL(__blockdev_direct_IO_newtrunc);
+
+/*
+ * This is a library function for use by filesystem drivers.
+ *
+ * The locking rules are governed by the flags parameter:
+ * - if the flags value contains DIO_LOCKING we use a fancy locking
+ * scheme for dumb filesystems.
+ * For writes this function is called under i_mutex and returns with
+ * i_mutex held, for reads, i_mutex is not held on entry, but it is
+ * taken and dropped again before returning.
+ * For reads and writes i_alloc_sem is taken in shared mode and released
+ * on I/O completion (which may happen asynchronously after returning to
+ * the caller).
+ *
+ * - if the flags value does NOT contain DIO_LOCKING we don't use any
+ * internal locking but rather rely on the filesystem to synchronize
+ * direct I/O reads/writes versus each other and truncate.
+ * For reads and writes both i_mutex and i_alloc_sem are not held on
+ * entry and are never taken.
+ */
+ssize_t
+__blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode,
+ struct block_device *bdev, const struct iovec *iov, loff_t offset,
+ unsigned long nr_segs, get_block_t get_block, dio_iodone_t end_io,
+ dio_submit_t submit_io, int flags)
+{
+ ssize_t retval;
+ retval = __blockdev_direct_IO_newtrunc(rw, iocb, inode, bdev, iov,
+ offset, nr_segs, get_block, end_io, submit_io, flags);
/*
* In case of error extending write may have instantiated a few
* blocks outside i_size. Trim these off again for DIO_LOCKING.
+ * NOTE: DIO_NO_LOCK/DIO_OWN_LOCK callers have to handle this in
+ * their own manner. This is a further example of where the old
+ * truncate sequence is inadequate.
*
* NOTE: filesystems with their own locking have to handle this
* on their own.
@@ -1209,12 +1275,13 @@ __blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode,
if (flags & DIO_LOCKING) {
if (unlikely((rw & WRITE) && retval < 0)) {
loff_t isize = i_size_read(inode);
+ loff_t end = offset + iov_length(iov, nr_segs);
+
if (end > isize)
vmtruncate(inode, isize);
}
}
-out:
return retval;
}
EXPORT_SYMBOL(__blockdev_direct_IO);