summaryrefslogtreecommitdiffstats
path: root/include/asm-v850/teg.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-v850/teg.h')
-rw-r--r--include/asm-v850/teg.h101
1 files changed, 101 insertions, 0 deletions
diff --git a/include/asm-v850/teg.h b/include/asm-v850/teg.h
new file mode 100644
index 000000000000..acc8c7d95329
--- /dev/null
+++ b/include/asm-v850/teg.h
@@ -0,0 +1,101 @@
+/*
+ * include/asm-v850/teg.h -- NB85E-TEG cpu chip
+ *
+ * Copyright (C) 2001,02,03 NEC Electronics Corporation
+ * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_TEG_H__
+#define __V850_TEG_H__
+
+
+/* The TEG uses the V850E cpu core. */
+#include <asm/v850e.h>
+#include <asm/v850e_cache.h>
+
+
+#define CPU_MODEL "v850e/nb85e-teg"
+#define CPU_MODEL_LONG "NEC V850E/NB85E TEG"
+
+
+/* For <asm/entry.h> */
+/* We use on-chip RAM, for a few miscellaneous variables that must be
+ accessible using a load instruction relative to R0. On the NB85E/TEG,
+ There's 60KB of iRAM starting at 0xFFFF0000, however we need the base
+ address to be addressable by a 16-bit signed offset, so we only use the
+ second half of it starting from 0xFFFF8000. */
+#define R0_RAM_ADDR 0xFFFF8000
+
+
+/* Hardware-specific interrupt numbers (in the kernel IRQ namespace).
+ Some of these are parameterized even though there's only a single
+ interrupt, for compatibility with some generic code that works on other
+ processor models. */
+#define IRQ_INTCMD(n) 6 /* interval timer interrupt */
+#define IRQ_INTCMD_NUM 1
+#define IRQ_INTSER(n) 16 /* UART reception error */
+#define IRQ_INTSER_NUM 1
+#define IRQ_INTSR(n) 17 /* UART reception completion */
+#define IRQ_INTSR_NUM 1
+#define IRQ_INTST(n) 18 /* UART transmission completion */
+#define IRQ_INTST_NUM 1
+
+/* For <asm/irq.h> */
+#define NUM_CPU_IRQS 64
+
+
+/* TEG UART details. */
+#define V850E_UART_BASE_ADDR(n) (0xFFFFF600 + 0x10 * (n))
+#define V850E_UART_ASIM_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x0)
+#define V850E_UART_ASIS_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x2)
+#define V850E_UART_ASIF_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x4)
+#define V850E_UART_CKSR_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x6)
+#define V850E_UART_BRGC_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x8)
+#define V850E_UART_TXB_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0xA)
+#define V850E_UART_RXB_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0xC)
+#define V850E_UART_NUM_CHANNELS 1
+#define V850E_UART_BASE_FREQ CPU_CLOCK_FREQ
+/* This is a function that gets called before configuring the UART. */
+#define V850E_UART_PRE_CONFIGURE teg_uart_pre_configure
+#ifndef __ASSEMBLY__
+extern void teg_uart_pre_configure (unsigned chan,
+ unsigned cflags, unsigned baud);
+#endif
+
+
+/* The TEG RTPU. */
+#define V850E_RTPU_BASE_ADDR 0xFFFFF210
+
+
+/* TEG series timer D details. */
+#define V850E_TIMER_D_BASE_ADDR 0xFFFFF210
+#define V850E_TIMER_D_TMCD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x0)
+#define V850E_TIMER_D_TMD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x4)
+#define V850E_TIMER_D_CMD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x8)
+#define V850E_TIMER_D_BASE_FREQ CPU_CLOCK_FREQ
+
+
+/* `Interrupt Source Select' control register. */
+#define TEG_ISS_ADDR 0xFFFFF7FA
+#define TEG_ISS (*(volatile u8 *)TEG_ISS_ADDR)
+
+/* Port 0 I/O register (bits 0-3 used). */
+#define TEG_PORT0_IO_ADDR 0xFFFFF7F2
+#define TEG_PORT0_IO (*(volatile u8 *)TEG_PORT0_IO_ADDR)
+/* Port 0 control register (bits 0-3 control mode, 0 = output, 1 = input). */
+#define TEG_PORT0_PM_ADDR 0xFFFFF7F4
+#define TEG_PORT0_PM (*(volatile u8 *)TEG_PORT0_PM_ADDR)
+
+
+#ifndef __ASSEMBLY__
+extern void teg_init_irqs (void);
+#endif
+
+
+#endif /* __V850_TEG_H__ */