diff options
Diffstat (limited to 'include/asm-xtensa/xtensa/xt2000.h')
| -rw-r--r-- | include/asm-xtensa/xtensa/xt2000.h | 408 |
1 files changed, 0 insertions, 408 deletions
diff --git a/include/asm-xtensa/xtensa/xt2000.h b/include/asm-xtensa/xtensa/xt2000.h deleted file mode 100644 index 703a45002f8f..000000000000 --- a/include/asm-xtensa/xtensa/xt2000.h +++ /dev/null @@ -1,408 +0,0 @@ -#ifndef _INC_XT2000_H_ -#define _INC_XT2000_H_ - -/* - * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND - * - * include/asm-xtensa/xtensa/xt2000.h - Definitions specific to the - * Tensilica XT2000 Emulation Board - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002 Tensilica Inc. - */ - - -#include <xtensa/config/core.h> -#include <xtensa/config/system.h> - - -/* - * Default assignment of XT2000 devices to external interrupts. - */ - -/* Ethernet interrupt: */ -#ifdef XCHAL_EXTINT3_NUM -#define SONIC83934_INTNUM XCHAL_EXTINT3_NUM -#define SONIC83934_INTLEVEL XCHAL_EXTINT3_LEVEL -#define SONIC83934_INTMASK XCHAL_EXTINT3_MASK -#else -#define SONIC83934_INTMASK 0 -#endif - -/* DUART channel 1 interrupt (P1 - console): */ -#ifdef XCHAL_EXTINT4_NUM -#define DUART16552_1_INTNUM XCHAL_EXTINT4_NUM -#define DUART16552_1_INTLEVEL XCHAL_EXTINT4_LEVEL -#define DUART16552_1_INTMASK XCHAL_EXTINT4_MASK -#else -#define DUART16552_1_INTMASK 0 -#endif - -/* DUART channel 2 interrupt (P2 - 2nd serial port): */ -#ifdef XCHAL_EXTINT5_NUM -#define DUART16552_2_INTNUM XCHAL_EXTINT5_NUM -#define DUART16552_2_INTLEVEL XCHAL_EXTINT5_LEVEL -#define DUART16552_2_INTMASK XCHAL_EXTINT5_MASK -#else -#define DUART16552_2_INTMASK 0 -#endif - -/* FPGA-combined PCI/etc interrupts: */ -#ifdef XCHAL_EXTINT6_NUM -#define XT2000_FPGAPCI_INTNUM XCHAL_EXTINT6_NUM -#define XT2000_FPGAPCI_INTLEVEL XCHAL_EXTINT6_LEVEL -#define XT2000_FPGAPCI_INTMASK XCHAL_EXTINT6_MASK -#else -#define XT2000_FPGAPCI_INTMASK 0 -#endif - - - -/* - * Device addresses. - * - * Note: for endianness-independence, use 32-bit loads and stores for all - * register accesses to Ethernet, DUART and LED devices. Undefined bits - * may need to be masked out if needed when reading if the actual register - * size is smaller than 32 bits. - * - * Note: XT2000 bus byte lanes are defined in terms of msbyte and lsbyte - * relative to the processor. So 32-bit registers are accessed consistently - * from both big and little endian processors. However, this means byte - * sequences are not consistent between big and little endian processors. - * This is fine for RAM, and for ROM if ROM is created for a specific - * processor (and thus has correct byte sequences). However this may be - * unexpected for Flash, which might contain a file-system that one wants - * to use for multiple processor configurations (eg. the Flash might contain - * the Ethernet card's address, endianness-independent application data, etc). - * That is, byte sequences written in Flash by a core of a given endianness - * will be byte-swapped when seen by a core of the other endianness. - * Someone implementing an endianness-independent Flash file system will - * likely handle this byte-swapping issue in the Flash driver software. - */ - -#define DUART16552_XTAL_FREQ 18432000 /* crystal frequency in Hz */ -#define XTBOARD_FLASH_MAXSIZE 0x4000000 /* 64 MB (max; depends on what is socketed!) */ -#define XTBOARD_EPROM_MAXSIZE 0x0400000 /* 4 MB (max; depends on what is socketed!) */ -#define XTBOARD_EEPROM_MAXSIZE 0x0080000 /* 512 kB (max; depends on what is socketed!) */ -#define XTBOARD_ASRAM_SIZE 0x0100000 /* 1 MB */ -#define XTBOARD_PCI_MEM_SIZE 0x8000000 /* 128 MB (allocated) */ -#define XTBOARD_PCI_IO_SIZE 0x1000000 /* 16 MB (allocated) */ - -#ifdef XSHAL_IOBLOCK_BYPASS_PADDR -/* PCI memory space: */ -# define XTBOARD_PCI_MEM_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0x0000000) -/* Socketed Flash (eg. 2 x 16-bit devices): */ -# define XTBOARD_FLASH_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0x8000000) -/* PCI I/O space: */ -# define XTBOARD_PCI_IO_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xC000000) -/* V3 PCI interface chip register/config space: */ -# define XTBOARD_V3PCI_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD000000) -/* Bus Interface registers: */ -# define XTBOARD_BUSINT_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD010000) -/* FPGA registers: */ -# define XT2000_FPGAREGS_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD020000) -/* SONIC SN83934 Ethernet controller/transceiver: */ -# define SONIC83934_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD030000) -/* 8-character bitmapped LED display: */ -# define XTBOARD_LED_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD040000) -/* National-Semi PC16552D DUART: */ -# define DUART16552_1_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD050020) /* channel 1 (P1 - console) */ -# define DUART16552_2_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD050000) /* channel 2 (P2) */ -/* Asynchronous Static RAM: */ -# define XTBOARD_ASRAM_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD400000) -/* 8-bit EEPROM: */ -# define XTBOARD_EEPROM_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD600000) -/* 2 x 16-bit EPROMs: */ -# define XTBOARD_EPROM_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD800000) -#endif /* XSHAL_IOBLOCK_BYPASS_PADDR */ - -/* These devices might be accessed cached: */ -#ifdef XSHAL_IOBLOCK_CACHED_PADDR -# define XTBOARD_PCI_MEM_CACHED_PADDR (XSHAL_IOBLOCK_CACHED_PADDR+0x0000000) -# define XTBOARD_FLASH_CACHED_PADDR (XSHAL_IOBLOCK_CACHED_PADDR+0x8000000) -# define XTBOARD_ASRAM_CACHED_PADDR (XSHAL_IOBLOCK_CACHED_PADDR+0xD400000) -# define XTBOARD_EEPROM_CACHED_PADDR (XSHAL_IOBLOCK_CACHED_PADDR+0xD600000) -# define XTBOARD_EPROM_CACHED_PADDR (XSHAL_IOBLOCK_CACHED_PADDR+0xD800000) -#endif /* XSHAL_IOBLOCK_CACHED_PADDR */ - - -/*** Same thing over again, this time with virtual addresses: ***/ - -#ifdef XSHAL_IOBLOCK_BYPASS_VADDR -/* PCI memory space: */ -# define XTBOARD_PCI_MEM_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0x0000000) -/* Socketed Flash (eg. 2 x 16-bit devices): */ -# define XTBOARD_FLASH_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0x8000000) -/* PCI I/O space: */ -# define XTBOARD_PCI_IO_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xC000000) -/* V3 PCI interface chip register/config space: */ -# define XTBOARD_V3PCI_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD000000) -/* Bus Interface registers: */ -# define XTBOARD_BUSINT_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD010000) -/* FPGA registers: */ -# define XT2000_FPGAREGS_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD020000) -/* SONIC SN83934 Ethernet controller/transceiver: */ -# define SONIC83934_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD030000) -/* 8-character bitmapped LED display: */ -# define XTBOARD_LED_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD040000) -/* National-Semi PC16552D DUART: */ -# define DUART16552_1_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD050020) /* channel 1 (P1 - console) */ -# define DUART16552_2_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD050000) /* channel 2 (P2) */ -/* Asynchronous Static RAM: */ -# define XTBOARD_ASRAM_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD400000) -/* 8-bit EEPROM: */ -# define XTBOARD_EEPROM_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD600000) -/* 2 x 16-bit EPROMs: */ -# define XTBOARD_EPROM_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD800000) -#endif /* XSHAL_IOBLOCK_BYPASS_VADDR */ - -/* These devices might be accessed cached: */ -#ifdef XSHAL_IOBLOCK_CACHED_VADDR -# define XTBOARD_PCI_MEM_CACHED_VADDR (XSHAL_IOBLOCK_CACHED_VADDR+0x0000000) -# define XTBOARD_FLASH_CACHED_VADDR (XSHAL_IOBLOCK_CACHED_VADDR+0x8000000) -# define XTBOARD_ASRAM_CACHED_VADDR (XSHAL_IOBLOCK_CACHED_VADDR+0xD400000) -# define XTBOARD_EEPROM_CACHED_VADDR (XSHAL_IOBLOCK_CACHED_VADDR+0xD600000) -# define XTBOARD_EPROM_CACHED_VADDR (XSHAL_IOBLOCK_CACHED_VADDR+0xD800000) -#endif /* XSHAL_IOBLOCK_CACHED_VADDR */ - - -/* System ROM: */ -#define XTBOARD_ROM_SIZE XSHAL_ROM_SIZE -#ifdef XSHAL_ROM_VADDR -#define XTBOARD_ROM_VADDR XSHAL_ROM_VADDR -#endif -#ifdef XSHAL_ROM_PADDR -#define XTBOARD_ROM_PADDR XSHAL_ROM_PADDR -#endif - -/* System RAM: */ -#define XTBOARD_RAM_SIZE XSHAL_RAM_SIZE -#ifdef XSHAL_RAM_VADDR -#define XTBOARD_RAM_VADDR XSHAL_RAM_VADDR -#endif -#ifdef XSHAL_RAM_PADDR -#define XTBOARD_RAM_PADDR XSHAL_RAM_PADDR -#endif -#define XTBOARD_RAM_BYPASS_VADDR XSHAL_RAM_BYPASS_VADDR -#define XTBOARD_RAM_BYPASS_PADDR XSHAL_RAM_BYPASS_PADDR - - - -/* - * Things that depend on device addresses. - */ - - -#define XTBOARD_CACHEATTR_WRITEBACK XSHAL_XT2000_CACHEATTR_WRITEBACK -#define XTBOARD_CACHEATTR_WRITEALLOC XSHAL_XT2000_CACHEATTR_WRITEALLOC -#define XTBOARD_CACHEATTR_WRITETHRU XSHAL_XT2000_CACHEATTR_WRITETHRU -#define XTBOARD_CACHEATTR_BYPASS XSHAL_XT2000_CACHEATTR_BYPASS -#define XTBOARD_CACHEATTR_DEFAULT XSHAL_XT2000_CACHEATTR_DEFAULT - -#define XTBOARD_BUSINT_PIPE_REGIONS XSHAL_XT2000_PIPE_REGIONS -#define XTBOARD_BUSINT_SDRAM_REGIONS XSHAL_XT2000_SDRAM_REGIONS - - - -/* - * BusLogic (FPGA) registers. - * All these registers are normally accessed using 32-bit loads/stores. - */ - -/* Register offsets: */ -#define XT2000_DATECD_OFS 0x00 /* date code (read-only) */ -#define XT2000_STSREG_OFS 0x04 /* status (read-only) */ -#define XT2000_SYSLED_OFS 0x08 /* system LED */ -#define XT2000_WRPROT_OFS 0x0C /* write protect */ -#define XT2000_SWRST_OFS 0x10 /* software reset */ -#define XT2000_SYSRST_OFS 0x14 /* system (peripherals) reset */ -#define XT2000_IMASK_OFS 0x18 /* interrupt mask */ -#define XT2000_ISTAT_OFS 0x1C /* interrupt status */ -#define XT2000_V3CFG_OFS 0x20 /* V3 config (V320 PCI) */ - -/* Physical register addresses: */ -#ifdef XT2000_FPGAREGS_PADDR -#define XT2000_DATECD_PADDR (XT2000_FPGAREGS_PADDR+XT2000_DATECD_OFS) -#define XT2000_STSREG_PADDR (XT2000_FPGAREGS_PADDR+XT2000_STSREG_OFS) -#define XT2000_SYSLED_PADDR (XT2000_FPGAREGS_PADDR+XT2000_SYSLED_OFS) -#define XT2000_WRPROT_PADDR (XT2000_FPGAREGS_PADDR+XT2000_WRPROT_OFS) -#define XT2000_SWRST_PADDR (XT2000_FPGAREGS_PADDR+XT2000_SWRST_OFS) -#define XT2000_SYSRST_PADDR (XT2000_FPGAREGS_PADDR+XT2000_SYSRST_OFS) -#define XT2000_IMASK_PADDR (XT2000_FPGAREGS_PADDR+XT2000_IMASK_OFS) -#define XT2000_ISTAT_PADDR (XT2000_FPGAREGS_PADDR+XT2000_ISTAT_OFS) -#define XT2000_V3CFG_PADDR (XT2000_FPGAREGS_PADDR+XT2000_V3CFG_OFS) -#endif - -/* Virtual register addresses: */ -#ifdef XT2000_FPGAREGS_VADDR -#define XT2000_DATECD_VADDR (XT2000_FPGAREGS_VADDR+XT2000_DATECD_OFS) -#define XT2000_STSREG_VADDR (XT2000_FPGAREGS_VADDR+XT2000_STSREG_OFS) -#define XT2000_SYSLED_VADDR (XT2000_FPGAREGS_VADDR+XT2000_SYSLED_OFS) -#define XT2000_WRPROT_VADDR (XT2000_FPGAREGS_VADDR+XT2000_WRPROT_OFS) -#define XT2000_SWRST_VADDR (XT2000_FPGAREGS_VADDR+XT2000_SWRST_OFS) -#define XT2000_SYSRST_VADDR (XT2000_FPGAREGS_VADDR+XT2000_SYSRST_OFS) -#define XT2000_IMASK_VADDR (XT2000_FPGAREGS_VADDR+XT2000_IMASK_OFS) -#define XT2000_ISTAT_VADDR (XT2000_FPGAREGS_VADDR+XT2000_ISTAT_OFS) -#define XT2000_V3CFG_VADDR (XT2000_FPGAREGS_VADDR+XT2000_V3CFG_OFS) -/* Register access (for C code): */ -#define XT2000_DATECD_REG (*(volatile unsigned*) XT2000_DATECD_VADDR) -#define XT2000_STSREG_REG (*(volatile unsigned*) XT2000_STSREG_VADDR) -#define XT2000_SYSLED_REG (*(volatile unsigned*) XT2000_SYSLED_VADDR) -#define XT2000_WRPROT_REG (*(volatile unsigned*) XT2000_WRPROT_VADDR) -#define XT2000_SWRST_REG (*(volatile unsigned*) XT2000_SWRST_VADDR) -#define XT2000_SYSRST_REG (*(volatile unsigned*) XT2000_SYSRST_VADDR) -#define XT2000_IMASK_REG (*(volatile unsigned*) XT2000_IMASK_VADDR) -#define XT2000_ISTAT_REG (*(volatile unsigned*) XT2000_ISTAT_VADDR) -#define XT2000_V3CFG_REG (*(volatile unsigned*) XT2000_V3CFG_VADDR) -#endif - -/* DATECD (date code) bit fields: */ - -/* BCD-coded month (01..12): */ -#define XT2000_DATECD_MONTH_SHIFT 24 -#define XT2000_DATECD_MONTH_BITS 8 -#define XT2000_DATECD_MONTH_MASK 0xFF000000 -/* BCD-coded day (01..31): */ -#define XT2000_DATECD_DAY_SHIFT 16 -#define XT2000_DATECD_DAY_BITS 8 -#define XT2000_DATECD_DAY_MASK 0x00FF0000 -/* BCD-coded year (2001..9999): */ -#define XT2000_DATECD_YEAR_SHIFT 0 -#define XT2000_DATECD_YEAR_BITS 16 -#define XT2000_DATECD_YEAR_MASK 0x0000FFFF - -/* STSREG (status) bit fields: */ - -/* Switch SW3 setting bit fields (0=off/up, 1=on/down): */ -#define XT2000_STSREG_SW3_SHIFT 0 -#define XT2000_STSREG_SW3_BITS 4 -#define XT2000_STSREG_SW3_MASK 0x0000000F -/* Boot-select bits of switch SW3: */ -#define XT2000_STSREG_BOOTSEL_SHIFT 0 -#define XT2000_STSREG_BOOTSEL_BITS 2 -#define XT2000_STSREG_BOOTSEL_MASK 0x00000003 -/* Boot-select values: */ -#define XT2000_STSREG_BOOTSEL_FLASH 0 -#define XT2000_STSREG_BOOTSEL_EPROM16 1 -#define XT2000_STSREG_BOOTSEL_PROM8 2 -#define XT2000_STSREG_BOOTSEL_ASRAM 3 -/* User-defined bits of switch SW3: */ -#define XT2000_STSREG_SW3_2_SHIFT 2 -#define XT2000_STSREG_SW3_2_MASK 0x00000004 -#define XT2000_STSREG_SW3_3_SHIFT 3 -#define XT2000_STSREG_SW3_3_MASK 0x00000008 - -/* SYSLED (system LED) bit fields: */ - -/* LED control bit (0=off, 1=on): */ -#define XT2000_SYSLED_LEDON_SHIFT 0 -#define XT2000_SYSLED_LEDON_MASK 0x00000001 - -/* WRPROT (write protect) bit fields (0=writable, 1=write-protected [default]): */ - -/* Flash write protect: */ -#define XT2000_WRPROT_FLWP_SHIFT 0 -#define XT2000_WRPROT_FLWP_MASK 0x00000001 -/* Reserved but present write protect bits: */ -#define XT2000_WRPROT_WRP_SHIFT 1 -#define XT2000_WRPROT_WRP_BITS 7 -#define XT2000_WRPROT_WRP_MASK 0x000000FE - -/* SWRST (software reset; allows s/w to generate power-on equivalent reset): */ - -/* Software reset bits: */ -#define XT2000_SWRST_SWR_SHIFT 0 -#define XT2000_SWRST_SWR_BITS 16 -#define XT2000_SWRST_SWR_MASK 0x0000FFFF -/* Software reset value -- writing this value resets the board: */ -#define XT2000_SWRST_RESETVALUE 0x0000DEAD - -/* SYSRST (system reset; controls reset of individual peripherals): */ - -/* All-device reset: */ -#define XT2000_SYSRST_ALL_SHIFT 0 -#define XT2000_SYSRST_ALL_BITS 4 -#define XT2000_SYSRST_ALL_MASK 0x0000000F -/* HDSP-2534 LED display reset (1=reset, 0=nothing): */ -#define XT2000_SYSRST_LED_SHIFT 0 -#define XT2000_SYSRST_LED_MASK 0x00000001 -/* Sonic DP83934 Ethernet controller reset (1=reset, 0=nothing): */ -#define XT2000_SYSRST_SONIC_SHIFT 1 -#define XT2000_SYSRST_SONIC_MASK 0x00000002 -/* DP16552 DUART reset (1=reset, 0=nothing): */ -#define XT2000_SYSRST_DUART_SHIFT 2 -#define XT2000_SYSRST_DUART_MASK 0x00000004 -/* V3 V320 PCI bridge controller reset (1=reset, 0=nothing): */ -#define XT2000_SYSRST_V3_SHIFT 3 -#define XT2000_SYSRST_V3_MASK 0x00000008 - -/* IMASK (interrupt mask; 0=disable, 1=enable): */ -/* ISTAT (interrupt status; 0=inactive, 1=pending): */ - -/* PCI INTP interrupt: */ -#define XT2000_INTMUX_PCI_INTP_SHIFT 2 -#define XT2000_INTMUX_PCI_INTP_MASK 0x00000004 -/* PCI INTS interrupt: */ -#define XT2000_INTMUX_PCI_INTS_SHIFT 3 -#define XT2000_INTMUX_PCI_INTS_MASK 0x00000008 -/* PCI INTD interrupt: */ -#define XT2000_INTMUX_PCI_INTD_SHIFT 4 -#define XT2000_INTMUX_PCI_INTD_MASK 0x00000010 -/* V320 PCI controller interrupt: */ -#define XT2000_INTMUX_V3_SHIFT 5 -#define XT2000_INTMUX_V3_MASK 0x00000020 -/* PCI ENUM interrupt: */ -#define XT2000_INTMUX_PCI_ENUM_SHIFT 6 -#define XT2000_INTMUX_PCI_ENUM_MASK 0x00000040 -/* PCI DEG interrupt: */ -#define XT2000_INTMUX_PCI_DEG_SHIFT 7 -#define XT2000_INTMUX_PCI_DEG_MASK 0x00000080 - -/* V3CFG (V3 config, V320 PCI controller): */ - -/* V3 address control (0=pass-thru, 1=V3 address bits 31:28 set to 4'b0001 [default]): */ -#define XT2000_V3CFG_V3ADC_SHIFT 0 -#define XT2000_V3CFG_V3ADC_MASK 0x00000001 - -/* I2C Devices */ - -#define XT2000_I2C_RTC_ID 0x68 -#define XT2000_I2C_NVRAM0_ID 0x56 /* 1st 256 byte block */ -#define XT2000_I2C_NVRAM1_ID 0x57 /* 2nd 256 byte block */ - -/* NVRAM Board Info structure: */ - -#define XT2000_NVRAM_SIZE 512 - -#define XT2000_NVRAM_BINFO_START 0x100 -#define XT2000_NVRAM_BINFO_SIZE 0x20 -#define XT2000_NVRAM_BINFO_VERSION 0x10 /* version 1.0 */ -#if 0 -#define XT2000_NVRAM_BINFO_VERSION_OFFSET 0x00 -#define XT2000_NVRAM_BINFO_VERSION_SIZE 0x1 -#define XT2000_NVRAM_BINFO_ETH_ADDR_OFFSET 0x02 -#define XT2000_NVRAM_BINFO_ETH_ADDR_SIZE 0x6 -#define XT2000_NVRAM_BINFO_SN_OFFSET 0x10 -#define XT2000_NVRAM_BINFO_SN_SIZE 0xE -#define XT2000_NVRAM_BINFO_CRC_OFFSET 0x1E -#define XT2000_NVRAM_BINFO_CRC_SIZE 0x2 -#endif /*0*/ - -#if !defined(__ASSEMBLY__) && !defined(_NOCLANGUAGE) -typedef struct xt2000_nvram_binfo { - unsigned char version; - unsigned char reserved1; - unsigned char eth_addr[6]; - unsigned char reserved8[8]; - unsigned char serialno[14]; - unsigned char crc[2]; /* 16-bit CRC */ -} xt2000_nvram_binfo; -#endif /*!__ASSEMBLY__ && !_NOCLANGUAGE*/ - - -#endif /*_INC_XT2000_H_*/ - |