diff options
Diffstat (limited to 'include/drm/drm_connector.h')
| -rw-r--r-- | include/drm/drm_connector.h | 778 |
1 files changed, 778 insertions, 0 deletions
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h new file mode 100644 index 000000000000..ac9d7d8e0e43 --- /dev/null +++ b/include/drm/drm_connector.h @@ -0,0 +1,778 @@ +/* + * Copyright (c) 2016 Intel Corporation + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#ifndef __DRM_CONNECTOR_H__ +#define __DRM_CONNECTOR_H__ + +#include <linux/list.h> +#include <linux/ctype.h> +#include <drm/drm_mode_object.h> + +#include <uapi/drm/drm_mode.h> + +struct drm_device; + +struct drm_connector_helper_funcs; +struct drm_device; +struct drm_crtc; +struct drm_encoder; +struct drm_property; +struct drm_property_blob; +struct edid; + +enum drm_connector_force { + DRM_FORCE_UNSPECIFIED, + DRM_FORCE_OFF, + DRM_FORCE_ON, /* force on analog part normally */ + DRM_FORCE_ON_DIGITAL, /* for DVI-I use digital connector */ +}; + +/** + * enum drm_connector_status - status for a &drm_connector + * + * This enum is used to track the connector status. There are no separate + * #defines for the uapi! + */ +enum drm_connector_status { + /** + * @connector_status_connected: The connector is definitely connected to + * a sink device, and can be enabled. + */ + connector_status_connected = 1, + /** + * @connector_status_disconnected: The connector isn't connected to a + * sink device which can be autodetect. For digital outputs like DP or + * HDMI (which can be realiable probed) this means there's really + * nothing there. It is driver-dependent whether a connector with this + * status can be lit up or not. + */ + connector_status_disconnected = 2, + /** + * @connector_status_unknown: The connector's status could not be + * reliably detected. This happens when probing would either cause + * flicker (like load-detection when the connector is in use), or when a + * hardware resource isn't available (like when load-detection needs a + * free CRTC). It should be possible to light up the connector with one + * of the listed fallback modes. For default configuration userspace + * should only try to light up connectors with unknown status when + * there's not connector with @connector_status_connected. + */ + connector_status_unknown = 3, +}; + +enum subpixel_order { + SubPixelUnknown = 0, + SubPixelHorizontalRGB, + SubPixelHorizontalBGR, + SubPixelVerticalRGB, + SubPixelVerticalBGR, + SubPixelNone, +}; + +/** + * struct drm_display_info - runtime data about the connected sink + * + * Describes a given display (e.g. CRT or flat panel) and its limitations. For + * fixed display sinks like built-in panels there's not much difference between + * this and struct &drm_connector. But for sinks with a real cable this + * structure is meant to describe all the things at the other end of the cable. + * + * For sinks which provide an EDID this can be filled out by calling + * drm_add_edid_modes(). + */ +struct drm_display_info { + /** + * @name: Name of the display. + */ + char name[DRM_DISPLAY_INFO_LEN]; + + /** + * @width_mm: Physical width in mm. + */ + unsigned int width_mm; + /** + * @height_mm: Physical height in mm. + */ + unsigned int height_mm; + + /** + * @pixel_clock: Maximum pixel clock supported by the sink, in units of + * 100Hz. This mismatches the clok in &drm_display_mode (which is in + * kHZ), because that's what the EDID uses as base unit. + */ + unsigned int pixel_clock; + /** + * @bpc: Maximum bits per color channel. Used by HDMI and DP outputs. + */ + unsigned int bpc; + + /** + * @subpixel_order: Subpixel order of LCD panels. + */ + enum subpixel_order subpixel_order; + +#define DRM_COLOR_FORMAT_RGB444 (1<<0) +#define DRM_COLOR_FORMAT_YCRCB444 (1<<1) +#define DRM_COLOR_FORMAT_YCRCB422 (1<<2) + + /** + * @color_formats: HDMI Color formats, selects between RGB and YCrCb + * modes. Used DRM_COLOR_FORMAT\_ defines, which are _not_ the same ones + * as used to describe the pixel format in framebuffers, and also don't + * match the formats in @bus_formats which are shared with v4l. + */ + u32 color_formats; + + /** + * @bus_formats: Pixel data format on the wire, somewhat redundant with + * @color_formats. Array of size @num_bus_formats encoded using + * MEDIA_BUS_FMT\_ defines shared with v4l and media drivers. + */ + const u32 *bus_formats; + /** + * @num_bus_formats: Size of @bus_formats array. + */ + unsigned int num_bus_formats; + +#define DRM_BUS_FLAG_DE_LOW (1<<0) +#define DRM_BUS_FLAG_DE_HIGH (1<<1) +/* drive data on pos. edge */ +#define DRM_BUS_FLAG_PIXDATA_POSEDGE (1<<2) +/* drive data on neg. edge */ +#define DRM_BUS_FLAG_PIXDATA_NEGEDGE (1<<3) + + /** + * @bus_flags: Additional information (like pixel signal polarity) for + * the pixel data on the bus, using DRM_BUS_FLAGS\_ defines. + */ + u32 bus_flags; + + /** + * @max_tmds_clock: Maximum TMDS clock rate supported by the + * sink in kHz. 0 means undefined. + */ + int max_tmds_clock; + + /** + * @dvi_dual: Dual-link DVI sink? + */ + bool dvi_dual; + + /** + * @edid_hdmi_dc_modes: Mask of supported hdmi deep color modes. Even + * more stuff redundant with @bus_formats. + */ + u8 edid_hdmi_dc_modes; + + /** + * @cea_rev: CEA revision of the HDMI sink. + */ + u8 cea_rev; +}; + +int drm_display_info_set_bus_formats(struct drm_display_info *info, + const u32 *formats, + unsigned int num_formats); + +/** + * struct drm_connector_state - mutable connector state + * @connector: backpointer to the connector + * @best_encoder: can be used by helpers and drivers to select the encoder + * @state: backpointer to global drm_atomic_state + */ +struct drm_connector_state { + struct drm_connector *connector; + + /** + * @crtc: CRTC to connect connector to, NULL if disabled. + * + * Do not change this directly, use drm_atomic_set_crtc_for_connector() + * instead. + */ + struct drm_crtc *crtc; + + struct drm_encoder *best_encoder; + + struct drm_atomic_state *state; +}; + +/** + * struct drm_connector_funcs - control connectors on a given device + * + * Each CRTC may have one or more connectors attached to it. The functions + * below allow the core DRM code to control connectors, enumerate available modes, + * etc. + */ +struct drm_connector_funcs { + /** + * @dpms: + * + * Legacy entry point to set the per-connector DPMS state. Legacy DPMS + * is exposed as a standard property on the connector, but diverted to + * this callback in the drm core. Note that atomic drivers don't + * implement the 4 level DPMS support on the connector any more, but + * instead only have an on/off "ACTIVE" property on the CRTC object. + * + * Drivers implementing atomic modeset should use + * drm_atomic_helper_connector_dpms() to implement this hook. + * + * RETURNS: + * + * 0 on success or a negative error code on failure. + */ + int (*dpms)(struct drm_connector *connector, int mode); + + /** + * @reset: + * + * Reset connector hardware and software state to off. This function isn't + * called by the core directly, only through drm_mode_config_reset(). + * It's not a helper hook only for historical reasons. + * + * Atomic drivers can use drm_atomic_helper_connector_reset() to reset + * atomic state using this hook. + */ + void (*reset)(struct drm_connector *connector); + + /** + * @detect: + * + * Check to see if anything is attached to the connector. The parameter + * force is set to false whilst polling, true when checking the + * connector due to a user request. force can be used by the driver to + * avoid expensive, destructive operations during automated probing. + * + * FIXME: + * + * Note that this hook is only called by the probe helper. It's not in + * the helper library vtable purely for historical reasons. The only DRM + * core entry point to probe connector state is @fill_modes. + * + * RETURNS: + * + * drm_connector_status indicating the connector's status. + */ + enum drm_connector_status (*detect)(struct drm_connector *connector, + bool force); + + /** + * @force: + * + * This function is called to update internal encoder state when the + * connector is forced to a certain state by userspace, either through + * the sysfs interfaces or on the kernel cmdline. In that case the + * @detect callback isn't called. + * + * FIXME: + * + * Note that this hook is only called by the probe helper. It's not in + * the helper library vtable purely for historical reasons. The only DRM + * core entry point to probe connector state is @fill_modes. + */ + void (*force)(struct drm_connector *connector); + + /** + * @fill_modes: + * + * Entry point for output detection and basic mode validation. The + * driver should reprobe the output if needed (e.g. when hotplug + * handling is unreliable), add all detected modes to connector->modes + * and filter out any the device can't support in any configuration. It + * also needs to filter out any modes wider or higher than the + * parameters max_width and max_height indicate. + * + * The drivers must also prune any modes no longer valid from + * connector->modes. Furthermore it must update connector->status and + * connector->edid. If no EDID has been received for this output + * connector->edid must be NULL. + * + * Drivers using the probe helpers should use + * drm_helper_probe_single_connector_modes() or + * drm_helper_probe_single_connector_modes_nomerge() to implement this + * function. + * + * RETURNS: + * + * The number of modes detected and filled into connector->modes. + */ + int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height); + + /** + * @set_property: + * + * This is the legacy entry point to update a property attached to the + * connector. + * + * Drivers implementing atomic modeset should use + * drm_atomic_helper_connector_set_property() to implement this hook. + * + * This callback is optional if the driver does not support any legacy + * driver-private properties. + * + * RETURNS: + * + * 0 on success or a negative error code on failure. + */ + int (*set_property)(struct drm_connector *connector, struct drm_property *property, + uint64_t val); + + /** + * @late_register: + * + * This optional hook can be used to register additional userspace + * interfaces attached to the connector, light backlight control, i2c, + * DP aux or similar interfaces. It is called late in the driver load + * sequence from drm_connector_register() when registering all the + * core drm connector interfaces. Everything added from this callback + * should be unregistered in the early_unregister callback. + * + * Returns: + * + * 0 on success, or a negative error code on failure. + */ + int (*late_register)(struct drm_connector *connector); + + /** + * @early_unregister: + * + * This optional hook should be used to unregister the additional + * userspace interfaces attached to the connector from + * late_register(). It is called from drm_connector_unregister(), + * early in the driver unload sequence to disable userspace access + * before data structures are torndown. + */ + void (*early_unregister)(struct drm_connector *connector); + + /** + * @destroy: + * + * Clean up connector resources. This is called at driver unload time + * through drm_mode_config_cleanup(). It can also be called at runtime + * when a connector is being hot-unplugged for drivers that support + * connector hotplugging (e.g. DisplayPort MST). + */ + void (*destroy)(struct drm_connector *connector); + + /** + * @atomic_duplicate_state: + * + * Duplicate the current atomic state for this connector and return it. + * The core and helpers guarantee that any atomic state duplicated with + * this hook and still owned by the caller (i.e. not transferred to the + * driver by calling ->atomic_commit() from struct + * &drm_mode_config_funcs) will be cleaned up by calling the + * @atomic_destroy_state hook in this structure. + * + * Atomic drivers which don't subclass struct &drm_connector_state should use + * drm_atomic_helper_connector_duplicate_state(). Drivers that subclass the + * state structure to extend it with driver-private state should use + * __drm_atomic_helper_connector_duplicate_state() to make sure shared state is + * duplicated in a consistent fashion across drivers. + * + * It is an error to call this hook before connector->state has been + * initialized correctly. + * + * NOTE: + * + * If the duplicate state references refcounted resources this hook must + * acquire a reference for each of them. The driver must release these + * references again in @atomic_destroy_state. + * + * RETURNS: + * + * Duplicated atomic state or NULL when the allocation failed. + */ + struct drm_connector_state *(*atomic_duplicate_state)(struct drm_connector *connector); + + /** + * @atomic_destroy_state: + * + * Destroy a state duplicated with @atomic_duplicate_state and release + * or unreference all resources it references + */ + void (*atomic_destroy_state)(struct drm_connector *connector, + struct drm_connector_state *state); + + /** + * @atomic_set_property: + * + * Decode a driver-private property value and store the decoded value + * into the passed-in state structure. Since the atomic core decodes all + * standardized properties (even for extensions beyond the core set of + * properties which might not be implemented by all drivers) this + * requires drivers to subclass the state structure. + * + * Such driver-private properties should really only be implemented for + * truly hardware/vendor specific state. Instead it is preferred to + * standardize atomic extension and decode the properties used to expose + * such an extension in the core. + * + * Do not call this function directly, use + * drm_atomic_connector_set_property() instead. + * + * This callback is optional if the driver does not support any + * driver-private atomic properties. + * + * NOTE: + * + * This function is called in the state assembly phase of atomic + * modesets, which can be aborted for any reason (including on + * userspace's request to just check whether a configuration would be + * possible). Drivers MUST NOT touch any persistent state (hardware or + * software) or data structures except the passed in @state parameter. + * + * Also since userspace controls in which order properties are set this + * function must not do any input validation (since the state update is + * incomplete and hence likely inconsistent). Instead any such input + * validation must be done in the various atomic_check callbacks. + * + * RETURNS: + * + * 0 if the property has been found, -EINVAL if the property isn't + * implemented by the driver (which shouldn't ever happen, the core only + * asks for properties attached to this connector). No other validation + * is allowed by the driver. The core already checks that the property + * value is within the range (integer, valid enum value, ...) the driver + * set when registering the property. + */ + int (*atomic_set_property)(struct drm_connector *connector, + struct drm_connector_state *state, + struct drm_property *property, + uint64_t val); + + /** + * @atomic_get_property: + * + * Reads out the decoded driver-private property. This is used to + * implement the GETCONNECTOR IOCTL. + * + * Do not call this function directly, use + * drm_atomic_connector_get_property() instead. + * + * This callback is optional if the driver does not support any + * driver-private atomic properties. + * + * RETURNS: + * + * 0 on success, -EINVAL if the property isn't implemented by the + * driver (which shouldn't ever happen, the core only asks for + * properties attached to this connector). + */ + int (*atomic_get_property)(struct drm_connector *connector, + const struct drm_connector_state *state, + struct drm_property *property, + uint64_t *val); +}; + +/* mode specified on the command line */ +struct drm_cmdline_mode { + bool specified; + bool refresh_specified; + bool bpp_specified; + int xres, yres; + int bpp; + int refresh; + bool rb; + bool interlace; + bool cvt; + bool margins; + enum drm_connector_force force; +}; + +/** + * struct drm_connector - central DRM connector control structure + * @dev: parent DRM device + * @kdev: kernel device for sysfs attributes + * @attr: sysfs attributes + * @head: list management + * @base: base KMS object + * @name: human readable name, can be overwritten by the driver + * @connector_type: one of the DRM_MODE_CONNECTOR_<foo> types from drm_mode.h + * @connector_type_id: index into connector type enum + * @interlace_allowed: can this connector handle interlaced modes? + * @doublescan_allowed: can this connector handle doublescan? + * @stereo_allowed: can this connector handle stereo modes? + * @registered: is this connector exposed (registered) with userspace? + * @modes: modes available on this connector (from fill_modes() + user) + * @status: one of the drm_connector_status enums (connected, not, or unknown) + * @probed_modes: list of modes derived directly from the display + * @funcs: connector control functions + * @edid_blob_ptr: DRM property containing EDID if present + * @properties: property tracking for this connector + * @dpms: current dpms state + * @helper_private: mid-layer private data + * @cmdline_mode: mode line parsed from the kernel cmdline for this connector + * @force: a DRM_FORCE_<foo> state for forced mode sets + * @override_edid: has the EDID been overwritten through debugfs for testing? + * @encoder_ids: valid encoders for this connector + * @encoder: encoder driving this connector, if any + * @eld: EDID-like data, if present + * @latency_present: AV delay info from ELD, if found + * @video_latency: video latency info from ELD, if found + * @audio_latency: audio latency info from ELD, if found + * @null_edid_counter: track sinks that give us all zeros for the EDID + * @bad_edid_counter: track sinks that give us an EDID with invalid checksum + * @edid_corrupt: indicates whether the last read EDID was corrupt + * @debugfs_entry: debugfs directory for this connector + * @state: current atomic state for this connector + * @has_tile: is this connector connected to a tiled monitor + * @tile_group: tile group for the connected monitor + * @tile_is_single_monitor: whether the tile is one monitor housing + * @num_h_tile: number of horizontal tiles in the tile group + * @num_v_tile: number of vertical tiles in the tile group + * @tile_h_loc: horizontal location of this tile + * @tile_v_loc: vertical location of this tile + * @tile_h_size: horizontal size of this tile. + * @tile_v_size: vertical size of this tile. + * + * Each connector may be connected to one or more CRTCs, or may be clonable by + * another connector if they can share a CRTC. Each connector also has a specific + * position in the broader display (referred to as a 'screen' though it could + * span multiple monitors). + */ +struct drm_connector { + struct drm_device *dev; + struct device *kdev; + struct device_attribute *attr; + struct list_head head; + + struct drm_mode_object base; + + char *name; + + /** + * @index: Compacted connector index, which matches the position inside + * the mode_config.list for drivers not supporting hot-add/removing. Can + * be used as an array index. It is invariant over the lifetime of the + * connector. + */ + unsigned index; + + int connector_type; + int connector_type_id; + bool interlace_allowed; + bool doublescan_allowed; + bool stereo_allowed; + bool registered; + struct list_head modes; /* list of modes on this connector */ + + enum drm_connector_status status; + + /* these are modes added by probing with DDC or the BIOS */ + struct list_head probed_modes; + + /** + * @display_info: Display information is filled from EDID information + * when a display is detected. For non hot-pluggable displays such as + * flat panels in embedded systems, the driver should initialize the + * display_info.width_mm and display_info.height_mm fields with the + * physical size of the display. + */ + struct drm_display_info display_info; + const struct drm_connector_funcs *funcs; + + struct drm_property_blob *edid_blob_ptr; + struct drm_object_properties properties; + + /** + * @path_blob_ptr: + * + * DRM blob property data for the DP MST path property. + */ + struct drm_property_blob *path_blob_ptr; + + /** + * @tile_blob_ptr: + * + * DRM blob property data for the tile property (used mostly by DP MST). + * This is meant for screens which are driven through separate display + * pipelines represented by &drm_crtc, which might not be running with + * genlocked clocks. For tiled panels which are genlocked, like + * dual-link LVDS or dual-link DSI, the driver should try to not expose + * the tiling and virtualize both &drm_crtc and &drm_plane if needed. + */ + struct drm_property_blob *tile_blob_ptr; + +/* should we poll this connector for connects and disconnects */ +/* hot plug detectable */ +#define DRM_CONNECTOR_POLL_HPD (1 << 0) +/* poll for connections */ +#define DRM_CONNECTOR_POLL_CONNECT (1 << 1) +/* can cleanly poll for disconnections without flickering the screen */ +/* DACs should rarely do this without a lot of testing */ +#define DRM_CONNECTOR_POLL_DISCONNECT (1 << 2) + + /** + * @polled: + * + * Connector polling mode, a combination of + * + * DRM_CONNECTOR_POLL_HPD + * The connector generates hotplug events and doesn't need to be + * periodically polled. The CONNECT and DISCONNECT flags must not + * be set together with the HPD flag. + * + * DRM_CONNECTOR_POLL_CONNECT + * Periodically poll the connector for connection. + * + * DRM_CONNECTOR_POLL_DISCONNECT + * Periodically poll the connector for disconnection. + * + * Set to 0 for connectors that don't support connection status + * discovery. + */ + uint8_t polled; + + /* requested DPMS state */ + int dpms; + + const struct drm_connector_helper_funcs *helper_private; + + /* forced on connector */ + struct drm_cmdline_mode cmdline_mode; + enum drm_connector_force force; + bool override_edid; + +#define DRM_CONNECTOR_MAX_ENCODER 3 + uint32_t encoder_ids[DRM_CONNECTOR_MAX_ENCODER]; + struct drm_encoder *encoder; /* currently active encoder */ + +#define MAX_ELD_BYTES 128 + /* EDID bits */ + uint8_t eld[MAX_ELD_BYTES]; + bool latency_present[2]; + int video_latency[2]; /* [0]: progressive, [1]: interlaced */ + int audio_latency[2]; + int null_edid_counter; /* needed to workaround some HW bugs where we get all 0s */ + unsigned bad_edid_counter; + + /* Flag for raw EDID header corruption - used in Displayport + * compliance testing - * Displayport Link CTS Core 1.2 rev1.1 4.2.2.6 + */ + bool edid_corrupt; + + struct dentry *debugfs_entry; + + struct drm_connector_state *state; + + /* DisplayID bits */ + bool has_tile; + struct drm_tile_group *tile_group; + bool tile_is_single_monitor; + + uint8_t num_h_tile, num_v_tile; + uint8_t tile_h_loc, tile_v_loc; + uint16_t tile_h_size, tile_v_size; +}; + +#define obj_to_connector(x) container_of(x, struct drm_connector, base) + +int drm_connector_init(struct drm_device *dev, + struct drm_connector *connector, + const struct drm_connector_funcs *funcs, + int connector_type); +int drm_connector_register(struct drm_connector *connector); +void drm_connector_unregister(struct drm_connector *connector); +int drm_mode_connector_attach_encoder(struct drm_connector *connector, + struct drm_encoder *encoder); + +void drm_connector_cleanup(struct drm_connector *connector); +static inline unsigned drm_connector_index(struct drm_connector *connector) +{ + return connector->index; +} + +/** + * drm_connector_lookup - lookup connector object + * @dev: DRM device + * @id: connector object id + * + * This function looks up the connector object specified by id + * add takes a reference to it. + */ +static inline struct drm_connector *drm_connector_lookup(struct drm_device *dev, + uint32_t id) +{ + struct drm_mode_object *mo; + mo = drm_mode_object_find(dev, id, DRM_MODE_OBJECT_CONNECTOR); + return mo ? obj_to_connector(mo) : NULL; +} + +/** + * drm_connector_reference - incr the connector refcnt + * @connector: connector + * + * This function increments the connector's refcount. + */ +static inline void drm_connector_reference(struct drm_connector *connector) +{ + drm_mode_object_reference(&connector->base); +} + +/** + * drm_connector_unreference - unref a connector + * @connector: connector to unref + * + * This function decrements the connector's refcount and frees it if it drops to zero. + */ +static inline void drm_connector_unreference(struct drm_connector *connector) +{ + drm_mode_object_unreference(&connector->base); +} + +const char *drm_get_connector_status_name(enum drm_connector_status status); +const char *drm_get_subpixel_order_name(enum subpixel_order order); +const char *drm_get_dpms_name(int val); +const char *drm_get_dvi_i_subconnector_name(int val); +const char *drm_get_dvi_i_select_name(int val); +const char *drm_get_tv_subconnector_name(int val); +const char *drm_get_tv_select_name(int val); + +int drm_mode_create_dvi_i_properties(struct drm_device *dev); +int drm_mode_create_tv_properties(struct drm_device *dev, + unsigned int num_modes, + const char * const modes[]); +int drm_mode_create_scaling_mode_property(struct drm_device *dev); +int drm_mode_create_aspect_ratio_property(struct drm_device *dev); +int drm_mode_create_suggested_offset_properties(struct drm_device *dev); + +int drm_mode_connector_set_path_property(struct drm_connector *connector, + const char *path); +int drm_mode_connector_set_tile_property(struct drm_connector *connector); +int drm_mode_connector_update_edid_property(struct drm_connector *connector, + const struct edid *edid); + +/** + * drm_for_each_connector - iterate over all connectors + * @connector: the loop cursor + * @dev: the DRM device + * + * Iterate over all connectors of @dev. + */ +#define drm_for_each_connector(connector, dev) \ + for (assert_drm_connector_list_read_locked(&(dev)->mode_config), \ + connector = list_first_entry(&(dev)->mode_config.connector_list, \ + struct drm_connector, head); \ + &connector->head != (&(dev)->mode_config.connector_list); \ + connector = list_next_entry(connector, head)) + +#endif |