3 files changed, 174 insertions, 304 deletions

diff --git a/include/linux/mfd/db5500-prcmu.h b/include/linux/mfd/db5500-prcmu.h
index f0977986402c..9890687f582d 100644
--- a/include/linux/mfd/db5500-prcmu.h
+++ b/include/linux/mfd/db5500-prcmu.h
@@ -5,21 +5,35 @@
  *
  * U5500 PRCMU API.
  */
-#ifndef __MACH_PRCMU_U5500_H
-#define __MACH_PRCMU_U5500_H
+#ifndef __MFD_DB5500_PRCMU_H
+#define __MFD_DB5500_PRCMU_H
 
-#ifdef CONFIG_UX500_SOC_DB5500
+#ifdef CONFIG_MFD_DB5500_PRCMU
 
 void db5500_prcmu_early_init(void);
-
+int db5500_prcmu_set_epod(u16 epod_id, u8 epod_state);
+int db5500_prcmu_set_display_clocks(void);
+int db5500_prcmu_disable_dsipll(void);
+int db5500_prcmu_enable_dsipll(void);
 int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
 int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
+void db5500_prcmu_enable_wakeups(u32 wakeups);
+int db5500_prcmu_request_clock(u8 clock, bool enable);
+void db5500_prcmu_config_abb_event_readout(u32 abb_events);
+void db5500_prcmu_get_abb_event_buffer(void __iomem **buf);
+int prcmu_resetout(u8 resoutn, u8 state);
+int db5500_prcmu_set_power_state(u8 state, bool keep_ulp_clk,
+	bool keep_ap_pll);
+int db5500_prcmu_config_esram0_deep_sleep(u8 state);
+void db5500_prcmu_system_reset(u16 reset_code);
+u16 db5500_prcmu_get_reset_code(void);
+bool db5500_prcmu_is_ac_wake_requested(void);
+int db5500_prcmu_set_arm_opp(u8 opp);
+int db5500_prcmu_get_arm_opp(void);
 
 #else /* !CONFIG_UX500_SOC_DB5500 */
 
-static inline void db5500_prcmu_early_init(void)
-{
-}
+static inline void db5500_prcmu_early_init(void) {}
 
 static inline int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
 {
@@ -31,15 +45,75 @@ static inline int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
 	return -ENOSYS;
 }
 
-#endif /* CONFIG_UX500_SOC_DB5500 */
+static inline int db5500_prcmu_request_clock(u8 clock, bool enable)
+{
+	return 0;
+}
+
+static inline int db5500_prcmu_set_display_clocks(void)
+{
+	return 0;
+}
+
+static inline int db5500_prcmu_disable_dsipll(void)
+{
+	return 0;
+}
+
+static inline int db5500_prcmu_enable_dsipll(void)
+{
+	return 0;
+}
 
-static inline int db5500_prcmu_config_abb_event_readout(u32 abb_events)
+static inline int db5500_prcmu_config_esram0_deep_sleep(u8 state)
 {
-#ifdef CONFIG_MACH_U5500_SIMULATOR
 	return 0;
-#else
-	return -1;
-#endif
 }
 
-#endif /* __MACH_PRCMU_U5500_H */
+static inline void db5500_prcmu_enable_wakeups(u32 wakeups) {}
+
+static inline int prcmu_resetout(u8 resoutn, u8 state)
+{
+	return 0;
+}
+
+static inline int db5500_prcmu_set_epod(u16 epod_id, u8 epod_state)
+{
+	return 0;
+}
+
+static inline void db5500_prcmu_get_abb_event_buffer(void __iomem **buf) {}
+static inline void db5500_prcmu_config_abb_event_readout(u32 abb_events) {}
+
+static inline int db5500_prcmu_set_power_state(u8 state, bool keep_ulp_clk,
+	bool keep_ap_pll)
+{
+	return 0;
+}
+
+static inline void db5500_prcmu_system_reset(u16 reset_code) {}
+
+static inline u16 db5500_prcmu_get_reset_code(void)
+{
+	return 0;
+}
+
+static inline bool db5500_prcmu_is_ac_wake_requested(void)
+{
+	return 0;
+}
+
+static inline int db5500_prcmu_set_arm_opp(u8 opp)
+{
+	return 0;
+}
+
+static inline int db5500_prcmu_get_arm_opp(void)
+{
+	return 0;
+}
+
+
+#endif /* CONFIG_MFD_DB5500_PRCMU */
+
+#endif /* __MFD_DB5500_PRCMU_H */
diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h
index 917dbcab701c..60d27f7bfc1f 100644
--- a/include/linux/mfd/db8500-prcmu.h
+++ b/include/linux/mfd/db8500-prcmu.h
@@ -11,7 +11,6 @@
 #define __MFD_DB8500_PRCMU_H
 
 #include <linux/interrupt.h>
-#include <linux/notifier.h>
 
 /* This portion previously known as <mach/prcmu-fw-defs_v1.h> */
 
@@ -133,7 +132,7 @@ enum ap_pwrst {
  * @APEXECUTE_TO_APIDLE: Power state transition from ApExecute to ApIdle
  */
 enum ap_pwrst_trans {
-	NO_TRANSITION			= 0x00,
+	PRCMU_AP_NO_CHANGE		= 0x00,
 	APEXECUTE_TO_APSLEEP		= 0x01,
 	APIDLE_TO_APSLEEP		= 0x02, /* To be removed */
 	PRCMU_AP_SLEEP			= 0x01,
@@ -146,54 +145,6 @@ enum ap_pwrst_trans {
 };
 
 /**
- * enum ddr_pwrst - DDR power states definition
- * @DDR_PWR_STATE_UNCHANGED: SDRAM and DDR controller state is unchanged
- * @DDR_PWR_STATE_ON:
- * @DDR_PWR_STATE_OFFLOWLAT:
- * @DDR_PWR_STATE_OFFHIGHLAT:
- */
-enum ddr_pwrst {
-	DDR_PWR_STATE_UNCHANGED     = 0x00,
-	DDR_PWR_STATE_ON            = 0x01,
-	DDR_PWR_STATE_OFFLOWLAT     = 0x02,
-	DDR_PWR_STATE_OFFHIGHLAT    = 0x03
-};
-
-/**
- * enum arm_opp - ARM OPP states definition
- * @ARM_OPP_INIT:
- * @ARM_NO_CHANGE: The ARM operating point is unchanged
- * @ARM_100_OPP: The new ARM operating point is arm100opp
- * @ARM_50_OPP: The new ARM operating point is arm50opp
- * @ARM_MAX_OPP: Operating point is "max" (more than 100)
- * @ARM_MAX_FREQ100OPP: Set max opp if available, else 100
- * @ARM_EXTCLK: The new ARM operating point is armExtClk
- */
-enum arm_opp {
-	ARM_OPP_INIT = 0x00,
-	ARM_NO_CHANGE = 0x01,
-	ARM_100_OPP = 0x02,
-	ARM_50_OPP = 0x03,
-	ARM_MAX_OPP = 0x04,
-	ARM_MAX_FREQ100OPP = 0x05,
-	ARM_EXTCLK = 0x07
-};
-
-/**
- * enum ape_opp - APE OPP states definition
- * @APE_OPP_INIT:
- * @APE_NO_CHANGE: The APE operating point is unchanged
- * @APE_100_OPP: The new APE operating point is ape100opp
- * @APE_50_OPP: 50%
- */
-enum ape_opp {
-	APE_OPP_INIT = 0x00,
-	APE_NO_CHANGE = 0x01,
-	APE_100_OPP = 0x02,
-	APE_50_OPP = 0x03
-};
-
-/**
  * enum hw_acc_state - State definition for hardware accelerator
  * @HW_NO_CHANGE: The hardware accelerator state must remain unchanged
  * @HW_OFF: The hardware accelerator must be switched off
@@ -469,26 +420,6 @@ enum auto_enable {
 
 /* End of file previously known as prcmu-fw-defs_v1.h */
 
-/* PRCMU Wakeup defines */
-enum prcmu_wakeup_index {
-	PRCMU_WAKEUP_INDEX_RTC,
-	PRCMU_WAKEUP_INDEX_RTT0,
-	PRCMU_WAKEUP_INDEX_RTT1,
-	PRCMU_WAKEUP_INDEX_HSI0,
-	PRCMU_WAKEUP_INDEX_HSI1,
-	PRCMU_WAKEUP_INDEX_USB,
-	PRCMU_WAKEUP_INDEX_ABB,
-	PRCMU_WAKEUP_INDEX_ABB_FIFO,
-	PRCMU_WAKEUP_INDEX_ARM,
-	NUM_PRCMU_WAKEUP_INDICES
-};
-#define PRCMU_WAKEUP(_name) (BIT(PRCMU_WAKEUP_INDEX_##_name))
-
-/* PRCMU QoS APE OPP class */
-#define PRCMU_QOS_APE_OPP 1
-#define PRCMU_QOS_DDR_OPP 2
-#define PRCMU_QOS_DEFAULT_VALUE -1
-
 /**
  * enum hw_acc_dev - enum for hw accelerators
  * @HW_ACC_SVAMMDSP: for SVAMMDSP
@@ -527,64 +458,6 @@ enum hw_acc_dev {
 };
 
 /*
- * Ids for all EPODs (power domains)
- * - EPOD_ID_SVAMMDSP: power domain for SVA MMDSP
- * - EPOD_ID_SVAPIPE: power domain for SVA pipe
- * - EPOD_ID_SIAMMDSP: power domain for SIA MMDSP
- * - EPOD_ID_SIAPIPE: power domain for SIA pipe
- * - EPOD_ID_SGA: power domain for SGA
- * - EPOD_ID_B2R2_MCDE: power domain for B2R2 and MCDE
- * - EPOD_ID_ESRAM12: power domain for ESRAM 1 and 2
- * - EPOD_ID_ESRAM34: power domain for ESRAM 3 and 4
- * - NUM_EPOD_ID: number of power domains
- */
-#define EPOD_ID_SVAMMDSP	0
-#define EPOD_ID_SVAPIPE		1
-#define EPOD_ID_SIAMMDSP	2
-#define EPOD_ID_SIAPIPE		3
-#define EPOD_ID_SGA		4
-#define EPOD_ID_B2R2_MCDE	5
-#define EPOD_ID_ESRAM12		6
-#define EPOD_ID_ESRAM34		7
-#define NUM_EPOD_ID		8
-
-/*
- * state definition for EPOD (power domain)
- * - EPOD_STATE_NO_CHANGE: The EPOD should remain unchanged
- * - EPOD_STATE_OFF: The EPOD is switched off
- * - EPOD_STATE_RAMRET: The EPOD is switched off with its internal RAM in
- *                         retention
- * - EPOD_STATE_ON_CLK_OFF: The EPOD is switched on, clock is still off
- * - EPOD_STATE_ON: Same as above, but with clock enabled
- */
-#define EPOD_STATE_NO_CHANGE	0x00
-#define EPOD_STATE_OFF		0x01
-#define EPOD_STATE_RAMRET	0x02
-#define EPOD_STATE_ON_CLK_OFF	0x03
-#define EPOD_STATE_ON		0x04
-
-/*
- * CLKOUT sources
- */
-#define PRCMU_CLKSRC_CLK38M		0x00
-#define PRCMU_CLKSRC_ACLK		0x01
-#define PRCMU_CLKSRC_SYSCLK		0x02
-#define PRCMU_CLKSRC_LCDCLK		0x03
-#define PRCMU_CLKSRC_SDMMCCLK		0x04
-#define PRCMU_CLKSRC_TVCLK		0x05
-#define PRCMU_CLKSRC_TIMCLK		0x06
-#define PRCMU_CLKSRC_CLK009		0x07
-/* These are only valid for CLKOUT1: */
-#define PRCMU_CLKSRC_SIAMMDSPCLK	0x40
-#define PRCMU_CLKSRC_I2CCLK		0x41
-#define PRCMU_CLKSRC_MSP02CLK		0x42
-#define PRCMU_CLKSRC_ARMPLL_OBSCLK	0x43
-#define PRCMU_CLKSRC_HSIRXCLK		0x44
-#define PRCMU_CLKSRC_HSITXCLK		0x45
-#define PRCMU_CLKSRC_ARMCLKFIX		0x46
-#define PRCMU_CLKSRC_HDMICLK		0x47
-
-/*
  * Definitions for autonomous power management configuration.
  */
 
@@ -620,88 +493,12 @@ struct prcmu_auto_pm_config {
 	u8 sva_policy;
 };
 
-/**
- * enum ddr_opp - DDR OPP states definition
- * @DDR_100_OPP: The new DDR operating point is ddr100opp
- * @DDR_50_OPP: The new DDR operating point is ddr50opp
- * @DDR_25_OPP: The new DDR operating point is ddr25opp
- */
-enum ddr_opp {
-	DDR_100_OPP = 0x00,
-	DDR_50_OPP = 0x01,
-	DDR_25_OPP = 0x02,
-};
-
-/*
- * Clock identifiers.
- */
-enum prcmu_clock {
-	PRCMU_SGACLK,
-	PRCMU_UARTCLK,
-	PRCMU_MSP02CLK,
-	PRCMU_MSP1CLK,
-	PRCMU_I2CCLK,
-	PRCMU_SDMMCCLK,
-	PRCMU_SLIMCLK,
-	PRCMU_PER1CLK,
-	PRCMU_PER2CLK,
-	PRCMU_PER3CLK,
-	PRCMU_PER5CLK,
-	PRCMU_PER6CLK,
-	PRCMU_PER7CLK,
-	PRCMU_LCDCLK,
-	PRCMU_BMLCLK,
-	PRCMU_HSITXCLK,
-	PRCMU_HSIRXCLK,
-	PRCMU_HDMICLK,
-	PRCMU_APEATCLK,
-	PRCMU_APETRACECLK,
-	PRCMU_MCDECLK,
-	PRCMU_IPI2CCLK,
-	PRCMU_DSIALTCLK,
-	PRCMU_DMACLK,
-	PRCMU_B2R2CLK,
-	PRCMU_TVCLK,
-	PRCMU_SSPCLK,
-	PRCMU_RNGCLK,
-	PRCMU_UICCCLK,
-	PRCMU_NUM_REG_CLOCKS,
-	PRCMU_SYSCLK = PRCMU_NUM_REG_CLOCKS,
-	PRCMU_TIMCLK,
-};
-
-/*
- * Definitions for controlling ESRAM0 in deep sleep.
- */
-#define ESRAM0_DEEP_SLEEP_STATE_OFF 1
-#define ESRAM0_DEEP_SLEEP_STATE_RET 2
-
-#ifdef CONFIG_MFD_DB8500_PRCMU
-void __init prcmu_early_init(void);
-int prcmu_set_display_clocks(void);
-int prcmu_disable_dsipll(void);
-int prcmu_enable_dsipll(void);
-#else
-static inline void __init prcmu_early_init(void) {}
-#endif
-
 #ifdef CONFIG_MFD_DB8500_PRCMU
 
+void db8500_prcmu_early_init(void);
 int prcmu_set_rc_a2p(enum romcode_write);
 enum romcode_read prcmu_get_rc_p2a(void);
 enum ap_pwrst prcmu_get_xp70_current_state(void);
-int prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll);
-
-void prcmu_enable_wakeups(u32 wakeups);
-static inline void prcmu_disable_wakeups(void)
-{
-	prcmu_enable_wakeups(0);
-}
-
-void prcmu_config_abb_event_readout(u32 abb_events);
-void prcmu_get_abb_event_buffer(void __iomem **buf);
-int prcmu_set_arm_opp(u8 opp);
-int prcmu_get_arm_opp(void);
 bool prcmu_has_arm_maxopp(void);
 bool prcmu_is_u8400(void);
 int prcmu_set_ape_opp(u8 opp);
@@ -710,19 +507,14 @@ int prcmu_request_ape_opp_100_voltage(bool enable);
 int prcmu_release_usb_wakeup_state(void);
 int prcmu_set_ddr_opp(u8 opp);
 int prcmu_get_ddr_opp(void);
-unsigned long prcmu_qos_get_cpufreq_opp_delay(void);
-void prcmu_qos_set_cpufreq_opp_delay(unsigned long);
 /* NOTE! Use regulator framework instead */
 int prcmu_set_hwacc(u16 hw_acc_dev, u8 state);
-int prcmu_set_epod(u16 epod_id, u8 epod_state);
 void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep,
 	struct prcmu_auto_pm_config *idle);
 bool prcmu_is_auto_pm_enabled(void);
 
 int prcmu_config_clkout(u8 clkout, u8 source, u8 div);
-int prcmu_request_clock(u8 clock, bool enable);
 int prcmu_set_clock_divider(u8 clock, u8 divider);
-int prcmu_config_esram0_deep_sleep(u8 state);
 int prcmu_config_hotdog(u8 threshold);
 int prcmu_config_hotmon(u8 low, u8 high);
 int prcmu_start_temp_sense(u16 cycles32k);
@@ -732,14 +524,36 @@ int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
 
 void prcmu_ac_wake_req(void);
 void prcmu_ac_sleep_req(void);
-void prcmu_system_reset(u16 reset_code);
 void prcmu_modem_reset(void);
-bool prcmu_is_ac_wake_requested(void);
 void prcmu_enable_spi2(void);
 void prcmu_disable_spi2(void);
 
+int prcmu_config_a9wdog(u8 num, bool sleep_auto_off);
+int prcmu_enable_a9wdog(u8 id);
+int prcmu_disable_a9wdog(u8 id);
+int prcmu_kick_a9wdog(u8 id);
+int prcmu_load_a9wdog(u8 id, u32 val);
+
+void db8500_prcmu_system_reset(u16 reset_code);
+int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll);
+void db8500_prcmu_enable_wakeups(u32 wakeups);
+int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state);
+int db8500_prcmu_request_clock(u8 clock, bool enable);
+int db8500_prcmu_set_display_clocks(void);
+int db8500_prcmu_disable_dsipll(void);
+int db8500_prcmu_enable_dsipll(void);
+void db8500_prcmu_config_abb_event_readout(u32 abb_events);
+void db8500_prcmu_get_abb_event_buffer(void __iomem **buf);
+int db8500_prcmu_config_esram0_deep_sleep(u8 state);
+u16 db8500_prcmu_get_reset_code(void);
+bool db8500_prcmu_is_ac_wake_requested(void);
+int db8500_prcmu_set_arm_opp(u8 opp);
+int db8500_prcmu_get_arm_opp(void);
+
 #else /* !CONFIG_MFD_DB8500_PRCMU */
 
+static inline void db8500_prcmu_early_init(void) {}
+
 static inline int prcmu_set_rc_a2p(enum romcode_write code)
 {
 	return 0;
@@ -755,34 +569,12 @@ static inline enum ap_pwrst prcmu_get_xp70_current_state(void)
 	return AP_EXECUTE;
 }
 
-static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk,
-	bool keep_ap_pll)
-{
-	return 0;
-}
-
-static inline void prcmu_enable_wakeups(u32 wakeups) {}
-
-static inline void prcmu_disable_wakeups(void) {}
-
-static inline void prcmu_config_abb_event_readout(u32 abb_events) {}
-
-static inline int prcmu_set_arm_opp(u8 opp)
-{
-	return 0;
-}
-
-static inline int prcmu_get_arm_opp(void)
-{
-	return ARM_100_OPP;
-}
-
-static bool prcmu_has_arm_maxopp(void)
+static inline bool prcmu_has_arm_maxopp(void)
 {
 	return false;
 }
 
-static bool prcmu_is_u8400(void)
+static inline bool prcmu_is_u8400(void)
 {
 	return false;
 }
@@ -817,13 +609,6 @@ static inline int prcmu_get_ddr_opp(void)
 	return DDR_100_OPP;
 }
 
-static inline unsigned long prcmu_qos_get_cpufreq_opp_delay(void)
-{
-	return 0;
-}
-
-static inline void prcmu_qos_set_cpufreq_opp_delay(unsigned long n) {}
-
 static inline int prcmu_set_hwacc(u16 hw_acc_dev, u8 state)
 {
 	return 0;
@@ -844,21 +629,11 @@ static inline int prcmu_config_clkout(u8 clkout, u8 source, u8 div)
 	return 0;
 }
 
-static inline int prcmu_request_clock(u8 clock, bool enable)
-{
-	return 0;
-}
-
 static inline int prcmu_set_clock_divider(u8 clock, u8 divider)
 {
 	return 0;
 }
 
-int prcmu_config_esram0_deep_sleep(u8 state)
-{
-	return 0;
-}
-
 static inline int prcmu_config_hotdog(u8 threshold)
 {
 	return 0;
@@ -893,86 +668,107 @@ static inline void prcmu_ac_wake_req(void) {}
 
 static inline void prcmu_ac_sleep_req(void) {}
 
-static inline void prcmu_system_reset(u16 reset_code) {}
-
 static inline void prcmu_modem_reset(void) {}
 
-static inline bool prcmu_is_ac_wake_requested(void)
+static inline int prcmu_enable_spi2(void)
 {
-	return false;
+	return 0;
 }
 
-#ifndef CONFIG_UX500_SOC_DB5500
-static inline int prcmu_set_display_clocks(void)
+static inline int prcmu_disable_spi2(void)
 {
 	return 0;
 }
 
-static inline int prcmu_disable_dsipll(void)
+static inline void db8500_prcmu_system_reset(u16 reset_code) {}
+
+static inline int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk,
+	bool keep_ap_pll)
 {
 	return 0;
 }
 
-static inline int prcmu_enable_dsipll(void)
+static inline void db8500_prcmu_enable_wakeups(u32 wakeups) {}
+
+static inline int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state)
 {
 	return 0;
 }
-#endif
 
-static inline int prcmu_enable_spi2(void)
+static inline int db8500_prcmu_request_clock(u8 clock, bool enable)
 {
 	return 0;
 }
 
-static inline int prcmu_disable_spi2(void)
+static inline int db8500_prcmu_set_display_clocks(void)
 {
 	return 0;
 }
 
-#endif /* !CONFIG_MFD_DB8500_PRCMU */
+static inline int db8500_prcmu_disable_dsipll(void)
+{
+	return 0;
+}
+
+static inline int db8500_prcmu_enable_dsipll(void)
+{
+	return 0;
+}
+
+static inline int db8500_prcmu_config_esram0_deep_sleep(u8 state)
+{
+	return 0;
+}
+
+static inline void db8500_prcmu_config_abb_event_readout(u32 abb_events) {}
 
-#ifdef CONFIG_UX500_PRCMU_QOS_POWER
-int prcmu_qos_requirement(int pm_qos_class);
-int prcmu_qos_add_requirement(int pm_qos_class, char *name, s32 value);
-int prcmu_qos_update_requirement(int pm_qos_class, char *name, s32 new_value);
-void prcmu_qos_remove_requirement(int pm_qos_class, char *name);
-int prcmu_qos_add_notifier(int prcmu_qos_class,
-			   struct notifier_block *notifier);
-int prcmu_qos_remove_notifier(int prcmu_qos_class,
-			      struct notifier_block *notifier);
-#else
-static inline int prcmu_qos_requirement(int prcmu_qos_class)
+static inline void db8500_prcmu_get_abb_event_buffer(void __iomem **buf) {}
+
+static inline u16 db8500_prcmu_get_reset_code(void)
 {
 	return 0;
 }
 
-static inline int prcmu_qos_add_requirement(int prcmu_qos_class,
-					    char *name, s32 value)
+static inline int prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
 {
 	return 0;
 }
 
-static inline int prcmu_qos_update_requirement(int prcmu_qos_class,
-					       char *name, s32 new_value)
+static inline int prcmu_enable_a9wdog(u8 id)
 {
 	return 0;
 }
 
-static inline void prcmu_qos_remove_requirement(int prcmu_qos_class, char *name)
+static inline int prcmu_disable_a9wdog(u8 id)
 {
+	return 0;
 }
 
-static inline int prcmu_qos_add_notifier(int prcmu_qos_class,
-					 struct notifier_block *notifier)
+static inline int prcmu_kick_a9wdog(u8 id)
 {
 	return 0;
 }
-static inline int prcmu_qos_remove_notifier(int prcmu_qos_class,
-					    struct notifier_block *notifier)
+
+static inline int prcmu_load_a9wdog(u8 id, u32 val)
 {
 	return 0;
 }
 
-#endif
+static inline bool db8500_prcmu_is_ac_wake_requested(void)
+{
+	return 0;
+}
+
+static inline int db8500_prcmu_set_arm_opp(u8 opp)
+{
+	return 0;
+}
+
+static inline int db8500_prcmu_get_arm_opp(void)
+{
+	return 0;
+}
+
+#endif /* !CONFIG_MFD_DB8500_PRCMU */
 
 #endif /* __MFD_DB8500_PRCMU_H */
diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h
index 6c7584d69d8f..bac942f959c1 100644
--- a/include/linux/mfd/dbx500-prcmu.h
+++ b/include/linux/mfd/dbx500-prcmu.h
@@ -240,7 +240,7 @@ static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk,
 static inline int prcmu_set_epod(u16 epod_id, u8 epod_state)
 {
 	if (machine_is_u5500())
-		return db5500_prcmu_set_epod(epod_id, epod_state);
+		return -EINVAL;
 	else
 		return db8500_prcmu_set_epod(epod_id, epod_state);
 }
@@ -295,7 +295,7 @@ int prcmu_get_ddr_opp(void);
 static inline int prcmu_set_arm_opp(u8 opp)
 {
 	if (machine_is_u5500())
-		return db5500_prcmu_set_arm_opp(opp);
+		return -EINVAL;
 	else
 		return db8500_prcmu_set_arm_opp(opp);
 }
@@ -303,7 +303,7 @@ static inline int prcmu_set_arm_opp(u8 opp)
 static inline int prcmu_get_arm_opp(void)
 {
 	if (machine_is_u5500())
-		return db5500_prcmu_get_arm_opp();
+		return -EINVAL;
 	else
 		return db8500_prcmu_get_arm_opp();
 }
@@ -362,7 +362,7 @@ static inline int prcmu_enable_dsipll(void)
 static inline int prcmu_config_esram0_deep_sleep(u8 state)
 {
 	if (machine_is_u5500())
-		return db5500_prcmu_config_esram0_deep_sleep(state);
+		return -EINVAL;
 	else
 		return db8500_prcmu_config_esram0_deep_sleep(state);
 }