summaryrefslogtreecommitdiffstats
path: root/include/linux/qic117.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/qic117.h')
-rw-r--r--include/linux/qic117.h290
1 files changed, 290 insertions, 0 deletions
diff --git a/include/linux/qic117.h b/include/linux/qic117.h
new file mode 100644
index 000000000000..07b537e5d359
--- /dev/null
+++ b/include/linux/qic117.h
@@ -0,0 +1,290 @@
+#ifndef _QIC117_H
+#define _QIC117_H
+
+/*
+ * Copyright (C) 1993-1996 Bas Laarhoven,
+ * (C) 1997 Claus-Justus Heine.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING. If not, write to
+ the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+ *
+ * $Source: /homes/cvs/ftape-stacked/include/linux/qic117.h,v $
+ * $Revision: 1.2 $
+ * $Date: 1997/10/05 19:19:32 $
+ *
+ * This file contains QIC-117 spec. related definitions for the
+ * QIC-40/80/3010/3020 floppy-tape driver "ftape" for Linux.
+ *
+ * These data were taken from the Quarter-Inch Cartridge
+ * Drive Standards, Inc. document titled:
+ * `Common Command Set Interface Specification for Flexible
+ * Disk Controller Based Minicartridge Tape Drives'
+ * document QIC-117 Revision J, 28 Aug 96.
+ * For more information, contact:
+ * Quarter-Inch Cartridge Drive Standards, Inc.
+ * 311 East Carrillo Street
+ * Santa Barbara, California 93101
+ * Telephone (805) 963-3853
+ * Fax (805) 962-1541
+ * WWW http://www.qic.org
+ *
+ * Current QIC standard revisions (of interest) are:
+ * QIC-40-MC, Rev. M, 2 Sep 92.
+ * QIC-80-MC, Rev. N, 20 Mar 96.
+ * QIC-80-MC, Rev. K, 15 Dec 94.
+ * QIC-113, Rev. G, 15 Jun 95.
+ * QIC-117, Rev. J, 28 Aug 96.
+ * QIC-122, Rev. B, 6 Mar 91.
+ * QIC-130, Rev. C, 2 Sep 92.
+ * QIC-3010-MC, Rev. F, 14 Jun 95.
+ * QIC-3020-MC, Rev. G, 31 Aug 95.
+ * QIC-CRF3, Rev. B, 15 Jun 95.
+ * */
+
+/*
+ * QIC-117 common command set rev. J.
+ * These commands are sent to the tape unit
+ * as number of pulses over the step line.
+ */
+
+typedef enum {
+ QIC_NO_COMMAND = 0,
+ QIC_RESET = 1,
+ QIC_REPORT_NEXT_BIT = 2,
+ QIC_PAUSE = 3,
+ QIC_MICRO_STEP_PAUSE = 4,
+ QIC_ALTERNATE_TIMEOUT = 5,
+ QIC_REPORT_DRIVE_STATUS = 6,
+ QIC_REPORT_ERROR_CODE = 7,
+ QIC_REPORT_DRIVE_CONFIGURATION = 8,
+ QIC_REPORT_ROM_VERSION = 9,
+ QIC_LOGICAL_FORWARD = 10,
+ QIC_PHYSICAL_REVERSE = 11,
+ QIC_PHYSICAL_FORWARD = 12,
+ QIC_SEEK_HEAD_TO_TRACK = 13,
+ QIC_SEEK_LOAD_POINT = 14,
+ QIC_ENTER_FORMAT_MODE = 15,
+ QIC_WRITE_REFERENCE_BURST = 16,
+ QIC_ENTER_VERIFY_MODE = 17,
+ QIC_STOP_TAPE = 18,
+/* commands 19-20: reserved */
+ QIC_MICRO_STEP_HEAD_UP = 21,
+ QIC_MICRO_STEP_HEAD_DOWN = 22,
+ QIC_SOFT_SELECT = 23,
+ QIC_SOFT_DESELECT = 24,
+ QIC_SKIP_REVERSE = 25,
+ QIC_SKIP_FORWARD = 26,
+ QIC_SELECT_RATE = 27,
+/* command 27, in ccs2: Select Rate or Format */
+ QIC_ENTER_DIAGNOSTIC_1 = 28,
+ QIC_ENTER_DIAGNOSTIC_2 = 29,
+ QIC_ENTER_PRIMARY_MODE = 30,
+/* command 31: vendor unique */
+ QIC_REPORT_VENDOR_ID = 32,
+ QIC_REPORT_TAPE_STATUS = 33,
+ QIC_SKIP_EXTENDED_REVERSE = 34,
+ QIC_SKIP_EXTENDED_FORWARD = 35,
+ QIC_CALIBRATE_TAPE_LENGTH = 36,
+ QIC_REPORT_FORMAT_SEGMENTS = 37,
+ QIC_SET_FORMAT_SEGMENTS = 38,
+/* commands 39-45: reserved */
+ QIC_PHANTOM_SELECT = 46,
+ QIC_PHANTOM_DESELECT = 47
+} qic117_cmd_t;
+
+typedef enum {
+ discretional = 0, required, ccs1, ccs2
+} qic_compatibility;
+
+typedef enum {
+ unused, mode, motion, report
+} command_types;
+
+struct qic117_command_table {
+ char *name;
+ __u8 mask;
+ __u8 state;
+ __u8 cmd_type;
+ __u8 non_intr;
+ __u8 level;
+};
+
+#define QIC117_COMMANDS {\
+/* command mask state cmd_type */\
+/* | name | | | non_intr */\
+/* | | | | | | level */\
+/* 0*/ {NULL, 0x00, 0x00, mode, 0, discretional},\
+/* 1*/ {"soft reset", 0x00, 0x00, motion, 1, required},\
+/* 2*/ {"report next bit", 0x00, 0x00, report, 0, required},\
+/* 3*/ {"pause", 0x36, 0x24, motion, 1, required},\
+/* 4*/ {"micro step pause", 0x36, 0x24, motion, 1, required},\
+/* 5*/ {"alternate command timeout", 0x00, 0x00, mode, 0, required},\
+/* 6*/ {"report drive status", 0x00, 0x00, report, 0, required},\
+/* 7*/ {"report error code", 0x01, 0x01, report, 0, required},\
+/* 8*/ {"report drive configuration",0x00, 0x00, report, 0, required},\
+/* 9*/ {"report rom version", 0x00, 0x00, report, 0, required},\
+/*10*/ {"logical forward", 0x37, 0x25, motion, 0, required},\
+/*11*/ {"physical reverse", 0x17, 0x05, motion, 0, required},\
+/*12*/ {"physical forward", 0x17, 0x05, motion, 0, required},\
+/*13*/ {"seek head to track", 0x37, 0x25, motion, 0, required},\
+/*14*/ {"seek load point", 0x17, 0x05, motion, 1, required},\
+/*15*/ {"enter format mode", 0x1f, 0x05, mode, 0, required},\
+/*16*/ {"write reference burst", 0x1f, 0x05, motion, 1, required},\
+/*17*/ {"enter verify mode", 0x37, 0x25, mode, 0, required},\
+/*18*/ {"stop tape", 0x00, 0x00, motion, 1, required},\
+/*19*/ {"reserved (19)", 0x00, 0x00, unused, 0, discretional},\
+/*20*/ {"reserved (20)", 0x00, 0x00, unused, 0, discretional},\
+/*21*/ {"micro step head up", 0x02, 0x00, motion, 0, required},\
+/*22*/ {"micro step head down", 0x02, 0x00, motion, 0, required},\
+/*23*/ {"soft select", 0x00, 0x00, mode, 0, discretional},\
+/*24*/ {"soft deselect", 0x00, 0x00, mode, 0, discretional},\
+/*25*/ {"skip segments reverse", 0x36, 0x24, motion, 1, required},\
+/*26*/ {"skip segments forward", 0x36, 0x24, motion, 1, required},\
+/*27*/ {"select rate or format", 0x03, 0x01, mode, 0, required /* [ccs2] */},\
+/*28*/ {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional},\
+/*29*/ {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional},\
+/*30*/ {"enter primary mode", 0x00, 0x00, mode, 0, required},\
+/*31*/ {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional},\
+/*32*/ {"report vendor id", 0x00, 0x00, report, 0, required},\
+/*33*/ {"report tape status", 0x04, 0x04, report, 0, ccs1},\
+/*34*/ {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1},\
+/*35*/ {"skip extended forward", 0x36, 0x24, motion, 1, ccs1},\
+/*36*/ {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2},\
+/*37*/ {"report format segments", 0x17, 0x05, report, 0, ccs2},\
+/*38*/ {"set format segments", 0x17, 0x05, mode, 0, ccs2},\
+/*39*/ {"reserved (39)", 0x00, 0x00, unused, 0, discretional},\
+/*40*/ {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional},\
+/*41*/ {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional},\
+/*42*/ {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional},\
+/*43*/ {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional},\
+/*44*/ {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional},\
+/*45*/ {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional},\
+/*46*/ {"phantom select", 0x00, 0x00, mode, 0, discretional},\
+/*47*/ {"phantom deselect", 0x00, 0x00, mode, 0, discretional},\
+}
+
+/*
+ * Status bits returned by QIC_REPORT_DRIVE_STATUS
+ */
+
+#define QIC_STATUS_READY 0x01 /* Drive is ready or idle. */
+#define QIC_STATUS_ERROR 0x02 /* Error detected, must read
+ error code to clear this */
+#define QIC_STATUS_CARTRIDGE_PRESENT 0x04 /* Tape is present */
+#define QIC_STATUS_WRITE_PROTECT 0x08 /* Tape is write protected */
+#define QIC_STATUS_NEW_CARTRIDGE 0x10 /* New cartridge inserted, must
+ read error status to clear. */
+#define QIC_STATUS_REFERENCED 0x20 /* Cartridge appears to have been
+ formatted. */
+#define QIC_STATUS_AT_BOT 0x40 /* Cartridge is at physical
+ beginning of tape. */
+#define QIC_STATUS_AT_EOT 0x80 /* Cartridge is at physical end
+ of tape. */
+/*
+ * Status bits returned by QIC_REPORT_DRIVE_CONFIGURATION
+ */
+
+#define QIC_CONFIG_RATE_MASK 0x18
+#define QIC_CONFIG_RATE_SHIFT 3
+#define QIC_CONFIG_RATE_250 0
+#define QIC_CONFIG_RATE_500 2
+#define QIC_CONFIG_RATE_1000 3
+#define QIC_CONFIG_RATE_2000 1
+#define QIC_CONFIG_RATE_4000 0 /* since QIC-117 Rev. J */
+
+#define QIC_CONFIG_LONG 0x40 /* Extra Length Tape Detected */
+#define QIC_CONFIG_80 0x80 /* QIC-80 detected. */
+
+/*
+ * Status bits returned by QIC_REPORT_TAPE_STATUS
+ */
+
+#define QIC_TAPE_STD_MASK 0x0f
+#define QIC_TAPE_QIC40 0x01
+#define QIC_TAPE_QIC80 0x02
+#define QIC_TAPE_QIC3020 0x03
+#define QIC_TAPE_QIC3010 0x04
+
+#define QIC_TAPE_LEN_MASK 0x70
+#define QIC_TAPE_205FT 0x10
+#define QIC_TAPE_307FT 0x20
+#define QIC_TAPE_VARIABLE 0x30
+#define QIC_TAPE_1100FT 0x40
+#define QIC_TAPE_FLEX 0x60
+
+#define QIC_TAPE_WIDE 0x80
+
+/* Define a value (in feet) slightly higher than
+ * the possible maximum tape length.
+ */
+#define QIC_TOP_TAPE_LEN 1500
+
+/*
+ * Errors: List of error codes, and their severity.
+ */
+
+typedef struct {
+ char *message; /* Text describing the error. */
+ unsigned int fatal:1; /* Non-zero if the error is fatal. */
+} ftape_error;
+
+#define QIC117_ERRORS {\
+ /* 0*/ { "No error", 0, },\
+ /* 1*/ { "Command Received while Drive Not Ready", 0, },\
+ /* 2*/ { "Cartridge Not Present or Removed", 1, },\
+ /* 3*/ { "Motor Speed Error (not within 1%)", 1, },\
+ /* 4*/ { "Motor Speed Fault (jammed, or gross speed error", 1, },\
+ /* 5*/ { "Cartridge Write Protected", 1, },\
+ /* 6*/ { "Undefined or Reserved Command Code", 1, },\
+ /* 7*/ { "Illegal Track Address Specified for Seek", 1, },\
+ /* 8*/ { "Illegal Command in Report Subcontext", 0, },\
+ /* 9*/ { "Illegal Entry into a Diagnostic Mode", 1, },\
+ /*10*/ { "Broken Tape Detected (based on hole sensor)", 1, },\
+ /*11*/ { "Warning--Read Gain Setting Error", 1, },\
+ /*12*/ { "Command Received While Error Status Pending (obs)", 1, },\
+ /*13*/ { "Command Received While New Cartridge Pending", 1, },\
+ /*14*/ { "Command Illegal or Undefined in Primary Mode", 1, },\
+ /*15*/ { "Command Illegal or Undefined in Format Mode", 1, },\
+ /*16*/ { "Command Illegal or Undefined in Verify Mode", 1, },\
+ /*17*/ { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, },\
+ /*18*/ { "Logical EOT Before All Segments generated", 1, },\
+ /*19*/ { "Command Illegal When Cartridge Not Referenced", 1, },\
+ /*20*/ { "Self-Diagnostic Failed (cannot be cleared)", 1, },\
+ /*21*/ { "Warning EEPROM Not Initialized, Defaults Set", 1, },\
+ /*22*/ { "EEPROM Corrupted or Hardware Failure", 1, },\
+ /*23*/ { "Motion Time-out Error", 1, },\
+ /*24*/ { "Data Segment Too Long -- Logical Forward or Pause", 1, },\
+ /*25*/ { "Transmit Overrun (obs)", 1, },\
+ /*26*/ { "Power On Reset Occurred", 0, },\
+ /*27*/ { "Software Reset Occurred", 0, },\
+ /*28*/ { "Diagnostic Mode 1 Error", 1, },\
+ /*29*/ { "Diagnostic Mode 2 Error", 1, },\
+ /*30*/ { "Command Received During Non-Interruptible Process", 1, },\
+ /*31*/ { "Rate or Format Selection Error", 1, },\
+ /*32*/ { "Illegal Command While in High Speed Mode", 1, },\
+ /*33*/ { "Illegal Seek Segment Value", 1, },\
+ /*34*/ { "Invalid Media", 1, },\
+ /*35*/ { "Head Positioning Failure", 1, },\
+ /*36*/ { "Write Reference Burst Failure", 1, },\
+ /*37*/ { "Prom Code Missing", 1, },\
+ /*38*/ { "Invalid Format", 1, },\
+ /*39*/ { "EOT/BOT System Failure", 1, },\
+ /*40*/ { "Prom A Checksum Error", 1, },\
+ /*41*/ { "Drive Wakeup Reset Occurred", 1, },\
+ /*42*/ { "Prom B Checksum Error", 1, },\
+ /*43*/ { "Illegal Entry into Format Mode", 1, },\
+}
+
+#endif /* _QIC117_H */