diff options
Diffstat (limited to 'tools/include')
| -rw-r--r-- | tools/include/linux/coresight-pmu.h | 2 | ||||
| -rw-r--r-- | tools/include/linux/filter.h | 21 | ||||
| -rw-r--r-- | tools/include/nolibc/nolibc.h | 194 | ||||
| -rw-r--r-- | tools/include/uapi/linux/bpf.h | 364 | ||||
| -rw-r--r-- | tools/include/uapi/linux/btf.h | 32 | ||||
| -rw-r--r-- | tools/include/uapi/sound/asound.h | 1 |
6 files changed, 568 insertions, 46 deletions
diff --git a/tools/include/linux/coresight-pmu.h b/tools/include/linux/coresight-pmu.h index a1a959ba24ff..b0e35eec6499 100644 --- a/tools/include/linux/coresight-pmu.h +++ b/tools/include/linux/coresight-pmu.h @@ -12,11 +12,13 @@ /* ETMv3.5/PTM's ETMCR config bit */ #define ETM_OPT_CYCACC 12 +#define ETM_OPT_CTXTID 14 #define ETM_OPT_TS 28 #define ETM_OPT_RETSTK 29 /* ETMv4 CONFIGR programming bits for the ETM OPTs */ #define ETM4_CFG_BIT_CYCACC 4 +#define ETM4_CFG_BIT_CTXTID 6 #define ETM4_CFG_BIT_TS 11 #define ETM4_CFG_BIT_RETSTK 12 diff --git a/tools/include/linux/filter.h b/tools/include/linux/filter.h index cce0b02c0e28..ca28b6ab8db7 100644 --- a/tools/include/linux/filter.h +++ b/tools/include/linux/filter.h @@ -278,10 +278,29 @@ .off = 0, \ .imm = ((__u64) (IMM)) >> 32 }) +#define BPF_LD_IMM64_RAW_FULL(DST, SRC, OFF1, OFF2, IMM1, IMM2) \ + ((struct bpf_insn) { \ + .code = BPF_LD | BPF_DW | BPF_IMM, \ + .dst_reg = DST, \ + .src_reg = SRC, \ + .off = OFF1, \ + .imm = IMM1 }), \ + ((struct bpf_insn) { \ + .code = 0, /* zero is reserved opcode */ \ + .dst_reg = 0, \ + .src_reg = 0, \ + .off = OFF2, \ + .imm = IMM2 }) + /* pseudo BPF_LD_IMM64 insn used to refer to process-local map_fd */ #define BPF_LD_MAP_FD(DST, MAP_FD) \ - BPF_LD_IMM64_RAW(DST, BPF_PSEUDO_MAP_FD, MAP_FD) + BPF_LD_IMM64_RAW_FULL(DST, BPF_PSEUDO_MAP_FD, 0, 0, \ + MAP_FD, 0) + +#define BPF_LD_MAP_VALUE(DST, MAP_FD, VALUE_OFF) \ + BPF_LD_IMM64_RAW_FULL(DST, BPF_PSEUDO_MAP_VALUE, 0, 0, \ + MAP_FD, VALUE_OFF) /* Relative call */ diff --git a/tools/include/nolibc/nolibc.h b/tools/include/nolibc/nolibc.h index 1708e9f9f8aa..2551e9b71167 100644 --- a/tools/include/nolibc/nolibc.h +++ b/tools/include/nolibc/nolibc.h @@ -1243,6 +1243,200 @@ struct sys_stat_struct { long st_pad4[14]; }; +#elif defined(__riscv) + +#if __riscv_xlen == 64 +#define PTRLOG "3" +#define SZREG "8" +#elif __riscv_xlen == 32 +#define PTRLOG "2" +#define SZREG "4" +#endif + +/* Syscalls for RISCV : + * - stack is 16-byte aligned + * - syscall number is passed in a7 + * - arguments are in a0, a1, a2, a3, a4, a5 + * - the system call is performed by calling ecall + * - syscall return comes in a0 + * - the arguments are cast to long and assigned into the target + * registers which are then simply passed as registers to the asm code, + * so that we don't have to experience issues with register constraints. + */ + +#define my_syscall0(num) \ +({ \ + register long _num asm("a7") = (num); \ + register long _arg1 asm("a0"); \ + \ + asm volatile ( \ + "ecall\n\t" \ + : "=r"(_arg1) \ + : "r"(_num) \ + : "memory", "cc" \ + ); \ + _arg1; \ +}) + +#define my_syscall1(num, arg1) \ +({ \ + register long _num asm("a7") = (num); \ + register long _arg1 asm("a0") = (long)(arg1); \ + \ + asm volatile ( \ + "ecall\n" \ + : "+r"(_arg1) \ + : "r"(_num) \ + : "memory", "cc" \ + ); \ + _arg1; \ +}) + +#define my_syscall2(num, arg1, arg2) \ +({ \ + register long _num asm("a7") = (num); \ + register long _arg1 asm("a0") = (long)(arg1); \ + register long _arg2 asm("a1") = (long)(arg2); \ + \ + asm volatile ( \ + "ecall\n" \ + : "+r"(_arg1) \ + : "r"(_arg2), \ + "r"(_num) \ + : "memory", "cc" \ + ); \ + _arg1; \ +}) + +#define my_syscall3(num, arg1, arg2, arg3) \ +({ \ + register long _num asm("a7") = (num); \ + register long _arg1 asm("a0") = (long)(arg1); \ + register long _arg2 asm("a1") = (long)(arg2); \ + register long _arg3 asm("a2") = (long)(arg3); \ + \ + asm volatile ( \ + "ecall\n\t" \ + : "+r"(_arg1) \ + : "r"(_arg2), "r"(_arg3), \ + "r"(_num) \ + : "memory", "cc" \ + ); \ + _arg1; \ +}) + +#define my_syscall4(num, arg1, arg2, arg3, arg4) \ +({ \ + register long _num asm("a7") = (num); \ + register long _arg1 asm("a0") = (long)(arg1); \ + register long _arg2 asm("a1") = (long)(arg2); \ + register long _arg3 asm("a2") = (long)(arg3); \ + register long _arg4 asm("a3") = (long)(arg4); \ + \ + asm volatile ( \ + "ecall\n" \ + : "+r"(_arg1) \ + : "r"(_arg2), "r"(_arg3), "r"(_arg4), \ + "r"(_num) \ + : "memory", "cc" \ + ); \ + _arg1; \ +}) + +#define my_syscall5(num, arg1, arg2, arg3, arg4, arg5) \ +({ \ + register long _num asm("a7") = (num); \ + register long _arg1 asm("a0") = (long)(arg1); \ + register long _arg2 asm("a1") = (long)(arg2); \ + register long _arg3 asm("a2") = (long)(arg3); \ + register long _arg4 asm("a3") = (long)(arg4); \ + register long _arg5 asm("a4") = (long)(arg5); \ + \ + asm volatile ( \ + "ecall\n" \ + : "+r"(_arg1) \ + : "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), \ + "r"(_num) \ + : "memory", "cc" \ + ); \ + _arg1; \ +}) + +#define my_syscall6(num, arg1, arg2, arg3, arg4, arg5, arg6) \ +({ \ + register long _num asm("a7") = (num); \ + register long _arg1 asm("a0") = (long)(arg1); \ + register long _arg2 asm("a1") = (long)(arg2); \ + register long _arg3 asm("a2") = (long)(arg3); \ + register long _arg4 asm("a3") = (long)(arg4); \ + register long _arg5 asm("a4") = (long)(arg5); \ + register long _arg6 asm("a5") = (long)(arg6); \ + \ + asm volatile ( \ + "ecall\n" \ + : "+r"(_arg1) \ + : "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), "r"(_arg6), \ + "r"(_num) \ + : "memory", "cc" \ + ); \ + _arg1; \ +}) + +/* startup code */ +asm(".section .text\n" + ".global _start\n" + "_start:\n" + ".option push\n" + ".option norelax\n" + "lla gp, __global_pointer$\n" + ".option pop\n" + "ld a0, 0(sp)\n" // argc (a0) was in the stack + "add a1, sp, "SZREG"\n" // argv (a1) = sp + "slli a2, a0, "PTRLOG"\n" // envp (a2) = SZREG*argc ... + "add a2, a2, "SZREG"\n" // + SZREG (skip null) + "add a2,a2,a1\n" // + argv + "andi sp,a1,-16\n" // sp must be 16-byte aligned + "call main\n" // main() returns the status code, we'll exit with it. + "andi a0, a0, 0xff\n" // limit exit code to 8 bits + "li a7, 93\n" // NR_exit == 93 + "ecall\n" + ""); + +/* fcntl / open */ +#define O_RDONLY 0 +#define O_WRONLY 1 +#define O_RDWR 2 +#define O_CREAT 0x100 +#define O_EXCL 0x200 +#define O_NOCTTY 0x400 +#define O_TRUNC 0x1000 +#define O_APPEND 0x2000 +#define O_NONBLOCK 0x4000 +#define O_DIRECTORY 0x200000 + +struct sys_stat_struct { + unsigned long st_dev; /* Device. */ + unsigned long st_ino; /* File serial number. */ + unsigned int st_mode; /* File mode. */ + unsigned int st_nlink; /* Link count. */ + unsigned int st_uid; /* User ID of the file's owner. */ + unsigned int st_gid; /* Group ID of the file's group. */ + unsigned long st_rdev; /* Device number, if device. */ + unsigned long __pad1; + long st_size; /* Size of file, in bytes. */ + int st_blksize; /* Optimal block size for I/O. */ + int __pad2; + long st_blocks; /* Number 512-byte blocks allocated. */ + long st_atime; /* Time of last access. */ + unsigned long st_atime_nsec; + long st_mtime; /* Time of last modification. */ + unsigned long st_mtime_nsec; + long st_ctime; /* Time of last status change. */ + unsigned long st_ctime_nsec; + unsigned int __unused4; + unsigned int __unused5; +}; + #endif diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h index 929c8e537a14..63e0cf66f01a 100644 --- a/tools/include/uapi/linux/bpf.h +++ b/tools/include/uapi/linux/bpf.h @@ -105,6 +105,7 @@ enum bpf_cmd { BPF_BTF_GET_FD_BY_ID, BPF_TASK_FD_QUERY, BPF_MAP_LOOKUP_AND_DELETE_ELEM, + BPF_MAP_FREEZE, }; enum bpf_map_type { @@ -132,6 +133,7 @@ enum bpf_map_type { BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE, BPF_MAP_TYPE_QUEUE, BPF_MAP_TYPE_STACK, + BPF_MAP_TYPE_SK_STORAGE, }; /* Note that tracing related programs such as @@ -166,6 +168,8 @@ enum bpf_prog_type { BPF_PROG_TYPE_LIRC_MODE2, BPF_PROG_TYPE_SK_REUSEPORT, BPF_PROG_TYPE_FLOW_DISSECTOR, + BPF_PROG_TYPE_CGROUP_SYSCTL, + BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE, }; enum bpf_attach_type { @@ -187,6 +191,7 @@ enum bpf_attach_type { BPF_CGROUP_UDP6_SENDMSG, BPF_LIRC_MODE2, BPF_FLOW_DISSECTOR, + BPF_CGROUP_SYSCTL, __MAX_BPF_ATTACH_TYPE }; @@ -255,8 +260,19 @@ enum bpf_attach_type { */ #define BPF_F_ANY_ALIGNMENT (1U << 1) -/* when bpf_ldimm64->src_reg == BPF_PSEUDO_MAP_FD, bpf_ldimm64->imm == fd */ +/* When BPF ldimm64's insn[0].src_reg != 0 then this can have + * two extensions: + * + * insn[0].src_reg: BPF_PSEUDO_MAP_FD BPF_PSEUDO_MAP_VALUE + * insn[0].imm: map fd map fd + * insn[1].imm: 0 offset into value + * insn[0].off: 0 0 + * insn[1].off: 0 0 + * ldimm64 rewrite: address of map address of map[0]+offset + * verifier type: CONST_PTR_TO_MAP PTR_TO_MAP_VALUE + */ #define BPF_PSEUDO_MAP_FD 1 +#define BPF_PSEUDO_MAP_VALUE 2 /* when bpf_call->src_reg == BPF_PSEUDO_CALL, bpf_call->imm == pc-relative * offset to another bpf function @@ -283,7 +299,7 @@ enum bpf_attach_type { #define BPF_OBJ_NAME_LEN 16U -/* Flags for accessing BPF object */ +/* Flags for accessing BPF object from syscall side. */ #define BPF_F_RDONLY (1U << 3) #define BPF_F_WRONLY (1U << 4) @@ -293,6 +309,10 @@ enum bpf_attach_type { /* Zero-initialize hash function seed. This should only be used for testing. */ #define BPF_F_ZERO_SEED (1U << 6) +/* Flags for accessing BPF object from program side. */ +#define BPF_F_RDONLY_PROG (1U << 7) +#define BPF_F_WRONLY_PROG (1U << 8) + /* flags for BPF_PROG_QUERY */ #define BPF_F_QUERY_EFFECTIVE (1U << 0) @@ -396,6 +416,13 @@ union bpf_attr { __aligned_u64 data_out; __u32 repeat; __u32 duration; + __u32 ctx_size_in; /* input: len of ctx_in */ + __u32 ctx_size_out; /* input/output: len of ctx_out + * returns ENOSPC if ctx_out + * is too small. + */ + __aligned_u64 ctx_in; + __aligned_u64 ctx_out; } test; struct { /* anonymous struct used by BPF_*_GET_*_ID */ @@ -602,7 +629,7 @@ union bpf_attr { * **BPF_F_INVALIDATE_HASH** (set *skb*\ **->hash**, *skb*\ * **->swhash** and *skb*\ **->l4hash** to 0). * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -627,7 +654,7 @@ union bpf_attr { * flexibility and can handle sizes larger than 2 or 4 for the * checksum to update. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -659,7 +686,7 @@ union bpf_attr { * flexibility and can handle sizes larger than 2 or 4 for the * checksum to update. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -714,7 +741,7 @@ union bpf_attr { * efficient, but it is handled through an action code where the * redirection happens only after the eBPF program has returned. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -779,7 +806,7 @@ union bpf_attr { * **ETH_P_8021Q** and **ETH_P_8021AD**, it is considered to * be **ETH_P_8021Q**. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -791,7 +818,7 @@ union bpf_attr { * Description * Pop a VLAN header from the packet associated to *skb*. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1141,7 +1168,7 @@ union bpf_attr { * All values for *flags* are reserved for future usage, and must * be left at zero. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1254,7 +1281,7 @@ union bpf_attr { * implicitly linearizes, unclones and drops offloads from the * *skb*. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1290,7 +1317,7 @@ union bpf_attr { * **bpf_skb_pull_data()** to effectively unclone the *skb* from * the very beginning in case it is indeed cloned. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1342,7 +1369,7 @@ union bpf_attr { * All values for *flags* are reserved for future usage, and must * be left at zero. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1357,7 +1384,7 @@ union bpf_attr { * can be used to prepare the packet for pushing or popping * headers. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1478,15 +1505,33 @@ union bpf_attr { * Grow or shrink the room for data in the packet associated to * *skb* by *len_diff*, and according to the selected *mode*. * - * There is a single supported mode at this time: + * There are two supported modes at this time: + * + * * **BPF_ADJ_ROOM_MAC**: Adjust room at the mac layer + * (room space is added or removed below the layer 2 header). * * * **BPF_ADJ_ROOM_NET**: Adjust room at the network layer * (room space is added or removed below the layer 3 header). * - * All values for *flags* are reserved for future usage, and must - * be left at zero. + * The following flags are supported at this time: + * + * * **BPF_F_ADJ_ROOM_FIXED_GSO**: Do not adjust gso_size. + * Adjusting mss in this way is not allowed for datagrams. + * + * * **BPF_F_ADJ_ROOM_ENCAP_L3_IPV4**, + * **BPF_F_ADJ_ROOM_ENCAP_L3_IPV6**: + * Any new space is reserved to hold a tunnel header. + * Configure skb offsets and other fields accordingly. + * + * * **BPF_F_ADJ_ROOM_ENCAP_L4_GRE**, + * **BPF_F_ADJ_ROOM_ENCAP_L4_UDP**: + * Use with ENCAP_L3 flags to further specify the tunnel type. + * + * * **BPF_F_ADJ_ROOM_ENCAP_L2**\ (*len*): + * Use with ENCAP_L3/L4 flags to further specify the tunnel + * type; *len* is the length of the inner MAC header. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1565,7 +1610,7 @@ union bpf_attr { * more flexibility as the user is free to store whatever meta * data they need. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1694,12 +1739,19 @@ union bpf_attr { * error if an eBPF program tries to set a callback that is not * supported in the current kernel. * - * The supported callback values that *argval* can combine are: + * *argval* is a flag array which can combine these flags: * * * **BPF_SOCK_OPS_RTO_CB_FLAG** (retransmission time out) * * **BPF_SOCK_OPS_RETRANS_CB_FLAG** (retransmission) * * **BPF_SOCK_OPS_STATE_CB_FLAG** (TCP state change) * + * Therefore, this function can be used to clear a callback flag by + * setting the appropriate bit to zero. e.g. to disable the RTO + * callback: + * + * **bpf_sock_ops_cb_flags_set(bpf_sock,** + * **bpf_sock->bpf_sock_ops_cb_flags & ~BPF_SOCK_OPS_RTO_CB_FLAG)** + * * Here are some examples of where one could call such eBPF * program: * @@ -1800,7 +1852,7 @@ union bpf_attr { * copied if necessary (i.e. if data was not linear and if start * and end pointers do not point to the same chunk). * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1834,7 +1886,7 @@ union bpf_attr { * only possible to shrink the packet as of this writing, * therefore *delta* must be a negative integer. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -2009,18 +2061,18 @@ union bpf_attr { * **BPF_LWT_ENCAP_IP** * IP encapsulation (GRE/GUE/IPIP/etc). The outer header * must be IPv4 or IPv6, followed by zero or more - * additional headers, up to LWT_BPF_MAX_HEADROOM total - * bytes in all prepended headers. Please note that - * if skb_is_gso(skb) is true, no more than two headers - * can be prepended, and the inner header, if present, - * should be either GRE or UDP/GUE. - * - * BPF_LWT_ENCAP_SEG6*** types can be called by bpf programs of - * type BPF_PROG_TYPE_LWT_IN; BPF_LWT_ENCAP_IP type can be called - * by bpf programs of types BPF_PROG_TYPE_LWT_IN and - * BPF_PROG_TYPE_LWT_XMIT. - * - * A call to this helper is susceptible to change the underlaying + * additional headers, up to **LWT_BPF_MAX_HEADROOM** + * total bytes in all prepended headers. Please note that + * if **skb_is_gso**\ (*skb*) is true, no more than two + * headers can be prepended, and the inner header, if + * present, should be either GRE or UDP/GUE. + * + * **BPF_LWT_ENCAP_SEG6**\ \* types can be called by BPF programs + * of type **BPF_PROG_TYPE_LWT_IN**; **BPF_LWT_ENCAP_IP** type can + * be called by bpf programs of types **BPF_PROG_TYPE_LWT_IN** and + * **BPF_PROG_TYPE_LWT_XMIT**. + * + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -2035,7 +2087,7 @@ union bpf_attr { * inside the outermost IPv6 Segment Routing Header can be * modified through this helper. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -2051,7 +2103,7 @@ union bpf_attr { * after the segments are accepted. *delta* can be as well * positive (growing) as negative (shrinking). * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -2074,13 +2126,13 @@ union bpf_attr { * Type of *param*: **int**. * **SEG6_LOCAL_ACTION_END_B6** * End.B6 action: Endpoint bound to an SRv6 policy. - * Type of param: **struct ipv6_sr_hdr**. + * Type of *param*: **struct ipv6_sr_hdr**. * **SEG6_LOCAL_ACTION_END_B6_ENCAP** * End.B6.Encap action: Endpoint bound to an SRv6 * encapsulation policy. - * Type of param: **struct ipv6_sr_hdr**. + * Type of *param*: **struct ipv6_sr_hdr**. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -2233,7 +2285,8 @@ union bpf_attr { * Return * Pointer to **struct bpf_sock**, or **NULL** in case of failure. * For sockets with reuseport option, the **struct bpf_sock** - * result is from **reuse->socks**\ [] using the hash of the tuple. + * result is from *reuse*\ **->socks**\ [] using the hash of the + * tuple. * * struct bpf_sock *bpf_sk_lookup_udp(void *ctx, struct bpf_sock_tuple *tuple, u32 tuple_size, u64 netns, u64 flags) * Description @@ -2269,7 +2322,8 @@ union bpf_attr { * Return * Pointer to **struct bpf_sock**, or **NULL** in case of failure. * For sockets with reuseport option, the **struct bpf_sock** - * result is from **reuse->socks**\ [] using the hash of the tuple. + * result is from *reuse*\ **->socks**\ [] using the hash of the + * tuple. * * int bpf_sk_release(struct bpf_sock *sock) * Description @@ -2431,6 +2485,193 @@ union bpf_attr { * Return * A **struct bpf_sock** pointer on success, or **NULL** in * case of failure. + * + * struct bpf_sock *bpf_skc_lookup_tcp(void *ctx, struct bpf_sock_tuple *tuple, u32 tuple_size, u64 netns, u64 flags) + * Description + * Look for TCP socket matching *tuple*, optionally in a child + * network namespace *netns*. The return value must be checked, + * and if non-**NULL**, released via **bpf_sk_release**\ (). + * + * This function is identical to **bpf_sk_lookup_tcp**\ (), except + * that it also returns timewait or request sockets. Use + * **bpf_sk_fullsock**\ () or **bpf_tcp_sock**\ () to access the + * full structure. + * + * This helper is available only if the kernel was compiled with + * **CONFIG_NET** configuration option. + * Return + * Pointer to **struct bpf_sock**, or **NULL** in case of failure. + * For sockets with reuseport option, the **struct bpf_sock** + * result is from *reuse*\ **->socks**\ [] using the hash of the + * tuple. + * + * int bpf_tcp_check_syncookie(struct bpf_sock *sk, void *iph, u32 iph_len, struct tcphdr *th, u32 th_len) + * Description + * Check whether *iph* and *th* contain a valid SYN cookie ACK for + * the listening socket in *sk*. + * + * *iph* points to the start of the IPv4 or IPv6 header, while + * *iph_len* contains **sizeof**\ (**struct iphdr**) or + * **sizeof**\ (**struct ip6hdr**). + * + * *th* points to the start of the TCP header, while *th_len* + * contains **sizeof**\ (**struct tcphdr**). + * + * Return + * 0 if *iph* and *th* are a valid SYN cookie ACK, or a negative + * error otherwise. + * + * int bpf_sysctl_get_name(struct bpf_sysctl *ctx, char *buf, size_t buf_len, u64 flags) + * Description + * Get name of sysctl in /proc/sys/ and copy it into provided by + * program buffer *buf* of size *buf_len*. + * + * The buffer is always NUL terminated, unless it's zero-sized. + * + * If *flags* is zero, full name (e.g. "net/ipv4/tcp_mem") is + * copied. Use **BPF_F_SYSCTL_BASE_NAME** flag to copy base name + * only (e.g. "tcp_mem"). + * Return + * Number of character copied (not including the trailing NUL). + * + * **-E2BIG** if the buffer wasn't big enough (*buf* will contain + * truncated name in this case). + * + * int bpf_sysctl_get_current_value(struct bpf_sysctl *ctx, char *buf, size_t buf_len) + * Description + * Get current value of sysctl as it is presented in /proc/sys + * (incl. newline, etc), and copy it as a string into provided + * by program buffer *buf* of size *buf_len*. + * + * The whole value is copied, no matter what file position user + * space issued e.g. sys_read at. + * + * The buffer is always NUL terminated, unless it's zero-sized. + * Return + * Number of character copied (not including the trailing NUL). + * + * **-E2BIG** if the buffer wasn't big enough (*buf* will contain + * truncated name in this case). + * + * **-EINVAL** if current value was unavailable, e.g. because + * sysctl is uninitialized and read returns -EIO for it. + * + * int bpf_sysctl_get_new_value(struct bpf_sysctl *ctx, char *buf, size_t buf_len) + * Description + * Get new value being written by user space to sysctl (before + * the actual write happens) and copy it as a string into + * provided by program buffer *buf* of size *buf_len*. + * + * User space may write new value at file position > 0. + * + * The buffer is always NUL terminated, unless it's zero-sized. + * Return + * Number of character copied (not including the trailing NUL). + * + * **-E2BIG** if the buffer wasn't big enough (*buf* will contain + * truncated name in this case). + * + * **-EINVAL** if sysctl is being read. + * + * int bpf_sysctl_set_new_value(struct bpf_sysctl *ctx, const char *buf, size_t buf_len) + * Description + * Override new value being written by user space to sysctl with + * value provided by program in buffer *buf* of size *buf_len*. + * + * *buf* should contain a string in same form as provided by user + * space on sysctl write. + * + * User space may write new value at file position > 0. To override + * the whole sysctl value file position should be set to zero. + * Return + * 0 on success. + * + * **-E2BIG** if the *buf_len* is too big. + * + * **-EINVAL** if sysctl is being read. + * + * int bpf_strtol(const char *buf, size_t buf_len, u64 flags, long *res) + * Description + * Convert the initial part of the string from buffer *buf* of + * size *buf_len* to a long integer according to the given base + * and save the result in *res*. + * + * The string may begin with an arbitrary amount of white space + * (as determined by **isspace**\ (3)) followed by a single + * optional '**-**' sign. + * + * Five least significant bits of *flags* encode base, other bits + * are currently unused. + * + * Base must be either 8, 10, 16 or 0 to detect it automatically + * similar to user space **strtol**\ (3). + * Return + * Number of characters consumed on success. Must be positive but + * no more than *buf_len*. + * + * **-EINVAL** if no valid digits were found or unsupported base + * was provided. + * + * **-ERANGE** if resulting value was out of range. + * + * int bpf_strtoul(const char *buf, size_t buf_len, u64 flags, unsigned long *res) + * Description + * Convert the initial part of the string from buffer *buf* of + * size *buf_len* to an unsigned long integer according to the + * given base and save the result in *res*. + * + * The string may begin with an arbitrary amount of white space + * (as determined by **isspace**\ (3)). + * + * Five least significant bits of *flags* encode base, other bits + * are currently unused. + * + * Base must be either 8, 10, 16 or 0 to detect it automatically + * similar to user space **strtoul**\ (3). + * Return + * Number of characters consumed on success. Must be positive but + * no more than *buf_len*. + * + * **-EINVAL** if no valid digits were found or unsupported base + * was provided. + * + * **-ERANGE** if resulting value was out of range. + * + * void *bpf_sk_storage_get(struct bpf_map *map, struct bpf_sock *sk, void *value, u64 flags) + * Description + * Get a bpf-local-storage from a *sk*. + * + * Logically, it could be thought of getting the value from + * a *map* with *sk* as the **key**. From this + * perspective, the usage is not much different from + * **bpf_map_lookup_elem**\ (*map*, **&**\ *sk*) except this + * helper enforces the key must be a full socket and the map must + * be a **BPF_MAP_TYPE_SK_STORAGE** also. + * + * Underneath, the value is stored locally at *sk* instead of + * the *map*. The *map* is used as the bpf-local-storage + * "type". The bpf-local-storage "type" (i.e. the *map*) is + * searched against all bpf-local-storages residing at *sk*. + * + * An optional *flags* (**BPF_SK_STORAGE_GET_F_CREATE**) can be + * used such that a new bpf-local-storage will be + * created if one does not exist. *value* can be used + * together with **BPF_SK_STORAGE_GET_F_CREATE** to specify + * the initial value of a bpf-local-storage. If *value* is + * **NULL**, the new bpf-local-storage will be zero initialized. + * Return + * A bpf-local-storage pointer is returned on success. + * + * **NULL** if not found or there was an error in adding + * a new bpf-local-storage. + * + * int bpf_sk_storage_delete(struct bpf_map *map, struct bpf_sock *sk) + * Description + * Delete a bpf-local-storage from a *sk*. + * Return + * 0 on success. + * + * **-ENOENT** if the bpf-local-storage cannot be found. */ #define __BPF_FUNC_MAPPER(FN) \ FN(unspec), \ @@ -2531,7 +2772,17 @@ union bpf_attr { FN(sk_fullsock), \ FN(tcp_sock), \ FN(skb_ecn_set_ce), \ - FN(get_listener_sock), + FN(get_listener_sock), \ + FN(skc_lookup_tcp), \ + FN(tcp_check_syncookie), \ + FN(sysctl_get_name), \ + FN(sysctl_get_current_value), \ + FN(sysctl_get_new_value), \ + FN(sysctl_set_new_value), \ + FN(strtol), \ + FN(strtoul), \ + FN(sk_storage_get), \ + FN(sk_storage_delete), /* integer value in 'imm' field of BPF_CALL instruction selects which helper * function eBPF program intends to call @@ -2590,9 +2841,30 @@ enum bpf_func_id { /* Current network namespace */ #define BPF_F_CURRENT_NETNS (-1L) +/* BPF_FUNC_skb_adjust_room flags. */ +#define BPF_F_ADJ_ROOM_FIXED_GSO (1ULL << 0) + +#define BPF_ADJ_ROOM_ENCAP_L2_MASK 0xff +#define BPF_ADJ_ROOM_ENCAP_L2_SHIFT 56 + +#define BPF_F_ADJ_ROOM_ENCAP_L3_IPV4 (1ULL << 1) +#define BPF_F_ADJ_ROOM_ENCAP_L3_IPV6 (1ULL << 2) +#define BPF_F_ADJ_ROOM_ENCAP_L4_GRE (1ULL << 3) +#define BPF_F_ADJ_ROOM_ENCAP_L4_UDP (1ULL << 4) +#define BPF_F_ADJ_ROOM_ENCAP_L2(len) (((__u64)len & \ + BPF_ADJ_ROOM_ENCAP_L2_MASK) \ + << BPF_ADJ_ROOM_ENCAP_L2_SHIFT) + +/* BPF_FUNC_sysctl_get_name flags. */ +#define BPF_F_SYSCTL_BASE_NAME (1ULL << 0) + +/* BPF_FUNC_sk_storage_get flags */ +#define BPF_SK_STORAGE_GET_F_CREATE (1ULL << 0) + /* Mode for BPF_FUNC_skb_adjust_room helper. */ enum bpf_adj_room_mode { BPF_ADJ_ROOM_NET, + BPF_ADJ_ROOM_MAC, }; /* Mode for BPF_FUNC_skb_load_bytes_relative helper. */ @@ -3218,4 +3490,14 @@ struct bpf_line_info { struct bpf_spin_lock { __u32 val; }; + +struct bpf_sysctl { + __u32 write; /* Sysctl is being read (= 0) or written (= 1). + * Allows 1,2,4-byte read, but no write. + */ + __u32 file_pos; /* Sysctl file position to read from, write to. + * Allows 1,2,4-byte read an 4-byte write. + */ +}; + #endif /* _UAPI__LINUX_BPF_H__ */ diff --git a/tools/include/uapi/linux/btf.h b/tools/include/uapi/linux/btf.h index 7b7475ef2f17..9310652ca4f9 100644 --- a/tools/include/uapi/linux/btf.h +++ b/tools/include/uapi/linux/btf.h @@ -39,11 +39,11 @@ struct btf_type { * struct, union and fwd */ __u32 info; - /* "size" is used by INT, ENUM, STRUCT and UNION. + /* "size" is used by INT, ENUM, STRUCT, UNION and DATASEC. * "size" tells the size of the type it is describing. * * "type" is used by PTR, TYPEDEF, VOLATILE, CONST, RESTRICT, - * FUNC and FUNC_PROTO. + * FUNC, FUNC_PROTO and VAR. * "type" is a type_id referring to another type. */ union { @@ -70,8 +70,10 @@ struct btf_type { #define BTF_KIND_RESTRICT 11 /* Restrict */ #define BTF_KIND_FUNC 12 /* Function */ #define BTF_KIND_FUNC_PROTO 13 /* Function Proto */ -#define BTF_KIND_MAX 13 -#define NR_BTF_KINDS 14 +#define BTF_KIND_VAR 14 /* Variable */ +#define BTF_KIND_DATASEC 15 /* Section */ +#define BTF_KIND_MAX BTF_KIND_DATASEC +#define NR_BTF_KINDS (BTF_KIND_MAX + 1) /* For some specific BTF_KIND, "struct btf_type" is immediately * followed by extra data. @@ -138,4 +140,26 @@ struct btf_param { __u32 type; }; +enum { + BTF_VAR_STATIC = 0, + BTF_VAR_GLOBAL_ALLOCATED, +}; + +/* BTF_KIND_VAR is followed by a single "struct btf_var" to describe + * additional information related to the variable such as its linkage. + */ +struct btf_var { + __u32 linkage; +}; + +/* BTF_KIND_DATASEC is followed by multiple "struct btf_var_secinfo" + * to describe all BTF_KIND_VAR types it contains along with it's + * in-section offset as well as size. + */ +struct btf_var_secinfo { + __u32 type; + __u32 offset; + __u32 size; +}; + #endif /* _UAPI__LINUX_BTF_H__ */ diff --git a/tools/include/uapi/sound/asound.h b/tools/include/uapi/sound/asound.h index 404d4b9ffe76..df1153cea0b7 100644 --- a/tools/include/uapi/sound/asound.h +++ b/tools/include/uapi/sound/asound.h @@ -32,6 +32,7 @@ #ifndef __KERNEL__ #include <stdlib.h> +#include <time.h> #endif /* |