summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: sunxi: Remove pinctrl groups setting biasMaxime Ripard2019-04-041-16/+2Star
| | | | | | | | | | | | | So far we've enabled pull-up and pull-down resistors on GPIOs using a pinctrl node. Now that the GPIO binding allows for a flag to declare this, let's switch to it. This brings us closer to removing all the GPIO pinctrl nodes, which will in turn allow us to switch the pinctrl strict mode on. Acked-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
* ARM: sunxi: Fix the USB PHY VBUS detect GPIO propertiesMaxime Ripard2019-03-251-1/+1
| | | | | | | | | | | | While the USB PHY Device Tree mandates that the name of the VBUS detect pin should be usb0_vbus_det-gpios, a significant number of device tree use usb0_vbus_det-gpio instead. This was functional because the GPIO framework falls back to the gpio suffix that is legacy, but we should fix this. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
* ARM: sunxi: Fix the USB PHY ID detect GPIO propertiesMaxime Ripard2019-03-251-1/+1
| | | | | | | | | | | | While the USB PHY Device Tree mandates that the name of the ID detect pin should be usb0_id_det-gpios, a significant number of device tree use usb0_id_det-gpio instead. This was functional because the GPIO framework falls back to the gpio suffix that is legacy, but we should fix this. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
* ARM: dts: sun7i: Provide default muxing for relevant controllersMaxime Ripard2018-11-281-10/+0Star
| | | | | | | | | The I2C and MMC controllers have only one muxing option in the SoC. In such a case, we can just move the muxing into the DTSI, and remove it from the DTS. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
* ARM: dts: sun7i: Remove underscores from nodes namesMaxime Ripard2018-11-281-4/+4
| | | | | | | | | | | | | Some GPIO pinctrl nodes cannot be easily removed, because they would also change the pin configuration, for example to add a pull resistor or change the current delivered by the pin. Those nodes still have underscores and unit-addresses in their node names in our DTs, so adjust their name to remove the warnings. Use that occasion to also fix some poorly chosen node-names. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
* ARM: dts: sun7i: Change pinctrl nodes to avoid warningMaxime Ripard2018-11-281-13/+13
| | | | | | | | | | | | | All our pinctrl nodes were using a node name convention with a unit-address to differentiate the different muxing options. However, since those nodes didn't have a reg property, they were generating warnings in DTC. In order to accomodate for this, convert the old nodes to the syntax we've been using for the new SoCs, including removing the letter suffix of the node labels to the bank of those pins to make things more readable. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
* ARM: dts: sun7i: Change LRADC node names to avoid warningsMaxime Ripard2018-11-281-7/+7
| | | | | | | | | | | | | | | One of the usage of the LRADC is to implement buttons. The bindings define that we should have one subnode per button, with their associated voltage as a property. However, there was no reg property but we still used the voltage associated to the button as the unit-address, which eventually generated warnings in DTC. Rename the node names to avoid those warnings. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
* ARM: dts: sun7i: Remove card detect pull-upMaxime Ripard2018-11-281-7/+1Star
| | | | | | | | | | Boards usually have an external pull-up on the card-detect signal, so there's no need to add another one. This also removes a DTC warning. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
* ARM: dts: sunxi: Switch MMC nodes away from cd-inverted propertyTuomas Tynkkynen2018-02-131-4/+2Star
| | | | | | | | | | Using the cd-inverted property is not useful when GPIOs are used as card detects since the polarity can be specified with the usual GPIO_ACTIVE_(HIGH|LOW) GPIO flags. It has also caused confusion for U-Boot developers, so migrate all sunxi boards away from cd-inverted. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
* ARM: dts: sun7i: Enable HDMI support on some A20 devicesChen-Yu Tsai2017-10-181-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | All the A20 devices I own have standard HDMI connectors wired to the dedicated HDMI pins on the SoC: - Bananapi M1+ - Cubieboard 2 - Cubietruck - Lamobo R1 (or Bananapi R1) Development boards from Olimex also have standard HDMI connectors. Schematics for them are publicly available. Enable HDMI on them as well. - Olimex A20-OLinuXino-LIME - Olimex A20-OLinuXino-LIME2 - Olimex A20-OLinuXino-MICRO Enable the display pipeline and HDMI output for them. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Priit Laes <plaes@plaes.org> # Cubietruck, A20-OLinuXino-MICRO Tested-by: Olliver Schinagl <oliver@schinagl.nl> # A20-OLinuXino-LIME2 Tested-by: Jonathan Liu <net147@gmail.com> # A20-OLinuXino-LIME Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: dts: sun7i: Fix A20-OLinuXino-MICRO dts for LAN8710Stefan Mavrodiev2017-09-171-1/+6
| | | | | | | | | | | | | From revision J the board uses new phy chip LAN8710. Compared with RTL8201, RA17 pin is TXERR. It has pullup which causes phy not to work. To fix this PA17 is muxed with GMAC function. This makes the pin output-low. This patch is compatible with earlier board revisions, since this pin wasn't connected to phy. Signed-off-by: Stefan Mavrodiev <stefan@olimex.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: dts: sun7i: Enable power supplies on A20-OLinuxIno-MicroHarald Geyer2017-09-171-0/+12
| | | | | | | | | | | The axp209.dtsi defines nodes for ac, usb and battery supplies for a while now. This patch enables these nodes for the A20-Olinuxino-Micro, which has connectors for all three of them. The patch was run-tested against linux-next-20170825. Signed-off-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sunxi: Drop mmc0_cd_pin_reference_design pinmux settingChen-Yu Tsai2017-05-141-1/+1
| | | | | | | | | | As part of our effort to move pinctrl/GPIO interlocking into the driver where it belongs, this patch drops the definition and usage of the mmc0_cd_pin_reference_design pinmux setting for the default mmc0 card detect GPIO pin. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: dts: sun7i: Use axp209.dtsi on A20-OLinuXino-MicroEzequiel Garcia2017-03-271-4/+27
| | | | | | | | | | | | This commit makes use of the axp209.dtsi file to define the AXP209 PMIC. While here, define the rails that are enabled on this board. Tested checking the regulator voltage varies according to the CPU frequency. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: dts: sunxi: Remove no longer used pinctrl/sun4i-a10.h headerChen-Yu Tsai2017-03-271-1/+0Star
| | | | | | | | | | | | | | | | | All dts files for the sunxi platform have been switched to the generic pinconf bindings. As a result, the sunxi specific pinctrl macros are no longer used. Remove the #include entry with the following command: sed --follow-symlinks -i -e '/pinctrl\/sun4i-a10.h/D' \ arch/arm/boot/dts/sun?i*.* arch/arm/boot/dts/sun9i-a80.dtsi was then edited to remove the extra empty line. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sun7i: Enable audio codec on A20-OLinuXino-MicroJonathan Liu2017-03-061-0/+4
| | | | | | | | The A20-OLinuXino-Micro has 3.5 mm sockets for headphone output and microphone input. Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sunxi: Convert pinctrl nodes to generic bindingsMaxime Ripard2016-12-261-12/+12
| | | | | | | | Now that we can handle the generic pinctrl bindings, convert our DT to it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
* ARM: sunxi: Remove useless allwinner,pull propertyMaxime Ripard2016-12-261-1/+0Star
| | | | | | | | | | | | The allwinner,pull property set to NO_PULL was really considered our default (and wasn't even changing the default value in the code). Remove these properties to make it obvious that we do not set anything in such a case. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
* ARM: sunxi: Remove useless allwinner,drive propertyMaxime Ripard2016-12-261-3/+0Star
| | | | | | | | | The allwinner,drive property set to 10mA was really considered as our default. Remove all those properties entirely to make that obvious. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
* dts: sunxi: add eeprom to A20 OLinuXino micro boardOlliver Schinagl2015-09-271-0/+6
| | | | | | | | The Olimex A20 OLinuXino Micro features an eeprom that is always on the board. This patch adds it to the dts. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: dts: sun7i: Enable USB DRC on A20-OLinuxIno-MicroHans de Goede2015-07-061-0/+32
| | | | | | | Enable the otg/drc usb controller on the A20-OLinuxIno-Micro. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sunxi: dt: Split the SPI pinctrl groupsMaxime Ripard2015-05-101-2/+4
| | | | | | | | | | | | | | | | | | | The pinctrl groups for SPI until now were also adding the chip selects in the SPI pinctrl group. This was causing a few issues, since a board was forced to use a random number of chipselects, even though it might use one of these chip selects for another pin. The number of chipselects defined was also not the same from one group to another because of different needs at the time these groups have been introduced, resulting in no clear view from the board DTS on what exactly is being muxed, which even might change in the future. Solve this by creating different pinctrl groups for the chipselects and the standard SPI pins (CLK, MOSI and MISO) so that we fix both issues. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sunxi: dt: Remove the FSF addressMaxime Ripard2015-05-101-5/+0Star
| | | | | | | | | | The FSF address triggers a warning on checkpatch, saying that the FSF license is already present in the Linux source code, and that it has already changed in the past. Remove it from our DT, as suggested. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sunxi: DT: Add stdout-path propertyMaxime Ripard2015-04-271-0/+4
| | | | | | | | | | | | Add UART aliases and stdout-path property for all the Allwinner boards so that we won't have to rely on the bootargs' console= value, while working with legacy bootloaders. While we're at it, also remove the mentions of earlyprintk in the bootargs, that will remove our default bootargs entirely, and allow the kernel to boot on a system even if DEBUG_LL is configured for another system. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sun7i: olinuxino micro: Convert to DT label based syntaxMaxime Ripard2015-04-271-183/+181Star
| | | | | | | | In order to lessen the amount of duplication of the DT tree, ease the new and follow the trend that prefers to use label based references when overriding DTSI nodes, convert the board to this syntax Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sun7i: olinuxino micro: Relicense the device tree under GPLv2/X11Maxime Ripard2015-04-271-5/+41
| | | | | | | | | | | | | | The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Carlo Caione <carlo@caione.org> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Zalan Blenessy <zalan.blenessy@gmail.com>
* Merge tag 'dt-for-linus' of ↵Linus Torvalds2015-02-171-10/+69
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Olof Johansson: "DT changes continue to be the bulk of our merge window contents. We continue to have a large set of changes across the board as new platforms and drivers are added. Some of the new platforms are: - Alphascale ASM9260 - Marvell Armada 388 - CSR Atlas7 - TI Davinci DM816x - Hisilicon HiP01 - ST STiH418 There have also been some sweeping changes, including relicensing of DTS contents from GPL to GPLv2+/X11 so that the same files can be reused in other non-GPL projects more easily. There's also been changes to the DT Makefile to make it a little less conflict-ridden and churny down the road" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (330 commits) ARM: dts: Add PPMU node for exynos4412-trats2 ARM: dts: Add PPMU node for exynos3250-monk and exynos3250-rinato ARM: dts: Add PPMU dt node for exynos4 and exynos4210 ARM: dts: Add PPMU dt node for exynos3250 ARM: dts: add mipi dsi device node for exynos4415 ARM: dts: add fimd device node for exynos4415 ARM: dts: Add syscon phandle to the video-phy node for Exynos4 ARM: dts: Add sound nodes for exynos4412-trats2 ARM: dts: Fix CLK_MOUT_CAMn parent clocks assignment for exynos4412-trats2 ARM: dts: Fix CLK_UART_ISP_SCLK clock assignment in exynos4x12.dtsi ARM: dts: Add max77693 charger node for exynos4412-trats2 ARM: dts: Switch max77686 regulators to GPIO control for exynos4412-trats2 ARM: dts: Add suspend configuration for max77686 regulators for exynos4412-trats2 ARM: dts: Add Maxim 77693 fuel gauge node for exynos4412-trats2 ARM: dts: am57xx-beagle-x15: Fix USB2 mode ARM: dts: am57xx-beagle-x15: Add extcon nodes for USB ARM: dts: dra72-evm: Add extcon nodes for USB ARM: dts: dra7-evm: Add extcon nodes for USB ARM: dts: rockchip: move the hdmi ddc-i2c-bus property to the actual boards ARM: dts: rockchip: enable vops and hdmi output on rk3288-firefly and -evb ...
| * ARM: sunxi: DT: Convert the DTs to use the generic interrupt headerMaxime Ripard2015-01-211-1/+2
| | | | | | | | | | | | | | | | | | The NMI IRQ controller uses the standard flags definition for the IRQ level and edges. Use the common header to use defines instead of opaque numbers. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| * ARM: sunxi: DT: Convert the DTs to use a header for the pinctrl nodesMaxime Ripard2015-01-211-4/+5
| | | | | | | | | | | | | | | | | | | | The pinctrl nodes require some extra opaque arguments for the pull up and drive strength values. Introduce a new header file and convert the device trees to replace these opaque numbers by defines. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| * ARM: sunxi: DT: convert DTs to use common GPIOs includesMaxime Ripard2015-01-211-3/+5
| | | | | | | | | | | | | | Replace the various raw GPIO flags by their definition in the common dt-bindings header. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| * ARM: dts: sun7i: Add lradc nodeHans de Goede2015-01-211-2/+57
| | | | | | | | | | Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* | ARM: sunxi: dt: Fix aliasesMaxime Ripard2015-01-251-0/+3
|/ | | | | | | | | | Commit f77d55a3b56a ("serial: 8250_dw: get index of serial line from DT aliases") made the serial driver now use the serial aliases to get the tty number, pointing out that our aliases have been wrong all along. Remove them from the DTSI and add custom ones in the relevant boards. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: dts: sun7i: Add AXP209 support to various boardsCarlo Caione2014-07-011-0/+10
| | | | | | | | | | | | | | | At a node for the axp209, and where necessary the i2c controller to the dts for various boards. Note the axp209 regulators are omitted as we don't have any use for them yet, and on some boards were not sure how exactly they are wired up. Adding support for just the axp209 without the regulators is still useful, as it will give us power-button and poweroff support. Signed-off-by: Carlo Caione <carlo@caione.org> [hdegoede@redhat.com: Drop the regulator bits for now] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: dts: sun7i: Add reg_vcc3v3 to sun7i board mmc nodesHans de Goede2014-05-111-0/+2
| | | | | Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: dts: sun7i: Enable mmc controller on various A20 boardsHans de Goede2014-05-051-0/+25
| | | | | | | | The cd pin settings have been taken from the original firmware fex files, and have been confirmed to work on the actual boards. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sun7i: dt: Add USB host nodes to a20-olinuxino-micro dtsZalan Blenessy2014-03-041-0/+30
| | | | | | | Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sun7i: dt: Add ahci / sata supportHans de Goede2014-03-041-0/+10
| | | | | | | | | | This patch adds sunxi sata support to A20 boards that have such a connector. Some boards also feature a regulator via a GPIO and support for this is also added. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: dts: sun7i: Enable the SPI controllers of the A20-olinuxino-microMaxime Ripard2014-02-241-0/+17
| | | | | | | The A20-Olinuxino-micro has two SPI bus exposed on its UEXT connectors, enable them. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: dts: sun7i: a20-olinuxino-micro: Enable GMAC instead of EMACChen-Yu Tsai2014-02-101-15/+12Star
| | | | | | | | GMAC has better performance and fewer hardware issues. Use the GMAC in MII mode for ethernet instead of the EMAC. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sun7i: olinuxino-micro: Enable the I2C controllersMaxime Ripard2013-09-181-0/+18
| | | | | | | The A20-olinuxino-micro uses the first three I2C controllers found on the A20. Enable them in the DT. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: dts: sun7i: olinuxino-micro: Enable the EMACMaxime Ripard2013-09-121-0/+15
| | | | | | | | The A20-olinuxino-micro has the EMAC wired in. Enable it in the DT so that we can use it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
* ARM: sun7i: a20-olinuxino: Enable the user LEDMaxime Ripard2013-08-221-0/+21
| | | | | | | The A20-olinuxino Micro has a LED connected to the PH2 pin. Use the gpio-led driver to enable the control over this LED. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sun7i: a20-olinuxino: Enable UARTs muxingMaxime Ripard2013-08-221-0/+6
| | | | | | | | Instead of relying on the bootloader to mux the UART pins properly, do it on our own and register the rightful pins for the A20-olinuxino in the DT using pinctrl. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sun7i: Add Olimex A20-Olinuxino-Micro supportMaxime Ripard2013-08-201-0/+34
The Olimex A20-Olinuxino is an open-hardware board based on the Allwinner A20 SoC, with most of the pins exported on headers, a 10/100M ethernet port, SATA, SD and uSD slots, etc. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-17 01:22:52 +0200