summaryrefslogtreecommitdiffstats
path: root/drivers/i2c/busses/Kconfig
Commit message (Collapse)AuthorAgeFilesLines
* i2c: i801: Add support for Intel Tiger LakeJarkko Nikula2019-07-051-0/+1
| | | | | | | | Add SMBUS PCI ID for Intel Tiger Lake -LP. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driverStefan Roese2019-06-261-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a driver for the I2C controller found on the MediaTek MT7621/7628/7688 SoC's. The base version of this driver was done by Steven Liu (according to the copyright and MODULE_AUTHOR lines). It can be found in the OpenWRT repositories (v4.14 at the time I looked). The base driver had many issues, which are disccussed here: https://en.forum.labs.mediatek.com/t/openwrt-15-05-loads-non-working-i2c-kernel-module-for-mt7688/1286/3 >From this link an enhanced driver version (complete rewrite, mayor changes: support clock stretching, repeated start, ACK handling and unlimited message length) from Jan Breuer can be found here: https://gist.github.com/j123b567/9b555b635c2b4069d716b24198546954 This patch now adds this enhanced I2C driver to mainline. Changes by Stefan Roese for upstreaming: - Add devicetree bindings - checkpatch clean - Use module_platform_driver() - Minor cosmetic enhancements - Removed IO warpped functions - Use readl_relaxed_poll_timeout() and drop poll_down_timeout() - Removed superfluous barrier() in mtk_i2c_reset() - Use i2c_8bit_addr_from_msg() - Added I2C_FUNC_PROTOCOL_MANGLING - Removed adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: René van Dorst <opensource@vdorst.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: i801: Add support for Intel Elkhart LakeJarkko Nikula2019-06-211-0/+1
| | | | | | | | Add PCI ID for Intel Elkhart Lake PCH. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: jz4780: Drop dependency on MACH_JZ4780Paul Cercueil2019-05-271-1/+1
| | | | | | | | | Depending on MACH_JZ4780 prevent us from creating a generic kernel that works on more than one MIPS board. Instead, we just depend on MIPS being set. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: Allow selecting BCM2835 I2C controllers on ARCH_BRCMSTBKamal Dasu2019-05-271-1/+1
| | | | | | | | | | ARCH_BRCMSTB platforms have the BCM2835 I2C controllers, allow selecting the i2c-bcm2835 driver on such platforms. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2019-05-211-0/+1
| | | | | | | | | | | | | | Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* i2c-piix4: Add Hygon Dhyana SMBus supportPu Wen2019-05-031-0/+1
| | | | | | | | | | The Hygon Dhyana CPU has the SMBus device with PCI device ID 0x790b, which is the same as AMD CZ SMBus device. So add Hygon Dhyana support to the i2c-piix4 driver by using the code path of AMD. Signed-off-by: Pu Wen <puwen@hygon.cn> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* Merge branch 'i2c-mux/for-next' of https://github.com/peda-r/i2c-mux into ↵Wolfram Sang2019-05-031-0/+1
|\ | | | | | | | | | | | | | | i2c/for-5.2 Mainly some pca954x work, i.e. removal of unused platform data support and added support for sysfs interface for manipulating/examining the idle state. And then a mechanical cocci-style patch.
| * i2c: i801: Add support for Intel Comet LakeJarkko Nikula2019-03-201-0/+1
| | | | | | | | | | | | | | | | Add PCI ID for Intel Comet Lake PCH. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* | i2c: iproc: Add slave mode supportShreesha Rajashekar2019-04-031-0/+1
| | | | | | | | | | | | | | | | | | | | Add slave mode support to the iProc I2C driver. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Signed-off-by: Michael Cheng <ccheng@broadcom.com> Signed-off-by: Shreesha Rajashekar <shreesha.rajashekar@broadcom.com> Signed-off-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* | i2c: Add drivers for the AMD PCIe MP2 I2C controllerElie Morisse2019-03-251-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MP2 controllers have two separate busses, so may accommodate up to two I2C adapters. Those adapters are listed in the ACPI namespace with the "AMDI0011" HID, and probed by a platform driver. Communication with the MP2 takes place through MMIO registers, or through DMA for more than 32 bytes transfers. This is major rework of the patch submitted by Nehal-bakulchandra Shah from AMD (https://patchwork.kernel.org/patch/10597369/). Most of the event handling of v3 was rewritten to make it work with more than one bus (e.g on Ryzen-based Lenovo Yoga 530), and this version contains many other improvements. Signed-off-by: Elie Morisse <syniurge@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* | i2c: at91: added slave mode supportJuergen Fitschen2019-03-241-0/+13
|/ | | | | | | | | | Slave mode driver is based on the concept of i2c-designware driver. Signed-off-by: Juergen Fitschen <me@jue.yt> [ludovic.desroches@microchip.com: rework Kconfig and replace IS_ENABLED by defined] Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: add i2c bus driver for NVIDIA GPUAjay Gupta2018-11-091-0/+9
| | | | | | | | | | | | | Latest NVIDIA GPU card has USB Type-C interface. There is a Type-C controller which can be accessed over I2C. This driver adds I2C bus driver to communicate with Type-C controller. I2C client driver will be part of USB Type-C UCSI driver. Signed-off-by: Ajay Gupta <ajayg@nvidia.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> [wsa: kept Makefile sorting] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: omap: Enable for ARCH_K3Vignesh R2018-11-091-1/+1
| | | | | | | | Allow I2C_OMAP to be built for K3 platforms. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: brcmstb: Allow enabling the driver on DSL SoCsFlorian Fainelli2018-10-051-3/+4
| | | | | | | | | ARCH_BCM_63XX which is used by ARM-based DSL SoCs from Broadcom uses the same controller, make it possible to select the STB driver and update the Kconfig and help text a bit. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: Add Actions Semiconductor Owl family S900 I2C driverManivannan Sadhasivam2018-08-041-0/+7
| | | | | | | | Add Actions Semiconductor Owl family S900 I2C driver. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controllerKarthikeyan Ramasubramanian2018-07-311-0/+13
| | | | | | | | | | | | | | | | | This bus driver supports the GENI based i2c hardware controller in the Qualcomm SOCs. The Qualcomm Generic Interface (GENI) is a programmable module supporting a wide range of serial interfaces including I2C. The driver supports FIFO mode and DMA mode of transfer and switches modes dynamically depending on the size of the transfer. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@codeaurora.org> Signed-off-by: Sagar Dharia <sdharia@codeaurora.org> Signed-off-by: Girish Mahadevan <girishm@codeaurora.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Stephen Boyd <swboyd@chromium.org> [wsa: squashed the MAINTAINER addition and a RPM fix by Evan Green] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: Add FSI-attached I2C master algorithmEddie James2018-07-211-0/+11
| | | | | | | | | | | Add register definitions for FSI-attached I2C master and functions to access those registers over FSI. Add an FSI driver so that our I2C bus is probed up during an FSI scan. Signed-off-by: Eddie James <eajames@linux.vnet.ibm.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: i801: Add support for Intel Ice LakeMika Westerberg2018-07-031-0/+1
| | | | | | | | | | | Intel Ice Lake has the same SMBus host controller than Intel Cannon Lake. Add the PCI ID to the drivers list of supported devices. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> [jarkko.nikula@linux.intel.com: Add entries to Documentation and Kconfig] Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: i801: Consolidate chipset names in documentation and KconfigJarkko Nikula2018-07-031-7/+3Star
| | | | | | | | | Make list of supported chipsets a little bit shorter by consolidating names that belong to the same family. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* Merge branch 'i2c/for-4.18' of ↵Linus Torvalds2018-06-141-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - mainly feature additions to drivers (stm32f7, qup, xlp9xx, mlxcpld, ...) - conversion to use the i2c_8bit_addr_from_msg macro consistently - move includes to platform_data - core updates to allow the (still in review) I3C subsystem to connect - and the regular share of smaller driver updates * 'i2c/for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (68 commits) i2c: qup: fix building without CONFIG_ACPI i2c: tegra: Remove suspend-resume i2c: imx-lpi2c: Switch to SPDX identifier i2c: mxs: Switch to SPDX identifier i2c: busses: make use of i2c_8bit_addr_from_msg i2c: algos: make use of i2c_8bit_addr_from_msg i2c: rcar: document R8A77980 bindings i2c: qup: Add command-line parameter to override SCL frequency i2c: qup: Correct duty cycle for FM and FM+ i2c: qup: Add support for Fast Mode Plus i2c: qup: add probe path for Centriq ACPI devices i2c: robotfuzz-osif: drop pointless test i2c: robotfuzz-osif: remove pointless local variable i2c: rk3x: Don't print visible virtual mapping MMIO address i2c: opal: don't check number of messages in the driver i2c: ibm_iic: don't check number of messages in the driver i2c: imx: Switch to SPDX identifier i2c: mux: pca954x: merge calls to of_match_device and of_device_get_match_data i2c: mux: demux-pinctrl: use proper parent device for demux adapter i2c: mux: improve error message for failed symlink ...
| * i2c: i2c-stm32f7: Add slave supportPierre-Yves MORDRET2018-04-301-0/+1
| | | | | | | | | | | | | | | | This patch adds slave support for I2C controller embedded in STM32F7 SoC Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* | platform: x86: intel_cht_int33fe: Fix dependenciesHeikki Krogerus2018-05-241-2/+1Star
|/ | | | | | | | | | | The driver will not probe unless bq24190 is loaded, so making it a dependency. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Darren Hart <dvhart@infradead.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* i2c: Remove depends on HAS_DMA in case of platform dependencyGeert Uytterhoeven2018-04-181-3/+0Star
| | | | | | | | | | | | | | | | | | Remove dependencies on HAS_DMA where a Kconfig symbol depends on another symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST". In most cases this other symbol is an architecture or platform specific symbol, or PCI. Generic symbols and drivers without platform dependencies keep their dependencies on HAS_DMA, to prevent compiling subsystems or drivers that cannot work anyway. This simplifies the dependencies, and allows to improve compile-testing. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Mark Brown <broonie@kernel.org> Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* Merge branch 'i2c/for-4.17' of ↵Linus Torvalds2018-04-071-0/+10
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: -I2C core now reports proper OF style module alias. I'd like to repeat the note from the commit msg here (Thanks, Javier!): NOTE: This patch may break out-of-tree drivers that were relying on this behavior, and only had an I2C device ID table even when the device was registered via OF. There are no remaining drivers in mainline that do this, but out-of-tree drivers have to be fixed and define a proper OF device ID table to have module auto-loading working. - new driver for the SynQuacer I2C controller - major refactoring of the QUP driver - the piix4 driver now uses request_muxed_region which should fix a long standing resource conflict with the sp5100_tco watchdog - a bunch of small core & driver improvements * 'i2c/for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (53 commits) i2c: add support for Socionext SynQuacer I2C controller dt-bindings: i2c: add binding for Socionext SynQuacer I2C i2c: Update i2c_trace_msg static key to modern api i2c: fix parameter of trace_i2c_result i2c: imx: avoid taking clk_prepare mutex in PM callbacks i2c: imx: use clk notifier for rate changes i2c: make i2c_check_addr_validity() static i2c: rcar: fix mask value of prohibited bit dt-bindings: i2c: document R8A77965 bindings i2c: pca-platform: drop gpio from platform data i2c: pca-platform: use device_property_read_u32 i2c: pca-platform: unconditionally use devm_gpiod_get_optional sh: sh7785lcr: add GPIO lookup table for i2c controller reset i2c: qup: reorganization of driver code to remove polling for qup v2 i2c: qup: reorganization of driver code to remove polling for qup v1 i2c: qup: send NACK for last read sub transfers i2c: qup: fix buffer overflow for multiple msg of maximum xfer len i2c: qup: change completion timeout according to transfer length i2c: qup: use the complete transfer length to choose DMA mode i2c: qup: proper error handling for i2c error in BAM mode ...
| * i2c: add support for Socionext SynQuacer I2C controllerArd Biesheuvel2018-04-041-0/+10
| | | | | | | | | | | | | | | | | | | | | | This is a cleaned up version of the I2C controller driver for the Fujitsu F_I2C IP, which was never supported upstream, and has now been incorporated into the Socionext SynQuacer SoC. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> [wsa: updated MAINTAINERS entry and removed two empty lines] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* | i2c: remove bfin-twi driverArnd Bergmann2018-03-261-18/+0Star
| | | | | | | | | | | | | | | | | | The blackfin architecture is getting removed, so the twi driver can also be removed. Acked-by: Aaron Wu <aaron.wu@analog.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* | Merge tag 'metag_remove_2' of ↵Arnd Bergmann2018-03-071-1/+1
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jhogan/metag into asm-generic Remove metag architecture These patches remove the metag architecture and tightly dependent drivers from the kernel. With the 4.16 kernel the ancient gcc 4.2.4 based metag toolchain we have been using is hitting compiler bugs, so now seems a good time to drop it altogether. * tag 'metag_remove_2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: i2c: img-scb: Drop METAG dependency media: img-ir: Drop METAG dependency watchdog: imgpdc: Drop METAG dependency MAINTAINERS/CREDITS: Drop METAG ARCHITECTURE tty: Remove metag DA TTY and console driver clocksource: Remove metag generic timer driver irqchip: Remove metag irqchip drivers Drop a bunch of metag references docs: Remove remaining references to metag docs: Remove metag docs metag: Remove arch/metag/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * i2c: img-scb: Drop METAG dependencyJames Hogan2018-03-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | Now that arch/metag/ has been removed, remove the METAG dependency from the IMG SCB I2C device driver. The hardware is also present on MIPS SoCs so the driver still has value. Signed-off-by: James Hogan <jhogan@kernel.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> Cc: linux-i2c@vger.kernel.org Cc: linux-metag@vger.kernel.org
* | i2c: i801: Add missing documentation entries for Braswell and Kaby LakeJarkko Nikula2018-02-211-0/+2
|/ | | | | | | | | Commits adding PCI IDs for Intel Braswell and Kaby Lake PCH-H lacked the respective Kconfig and Documentation/i2c/busses/i2c-i801 change. Add them now. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: gpio: add fault injectorWolfram Sang2017-12-031-0/+8
| | | | | | | | Add fault injection capabilities to the i2c-gpio driver. When connected to another I2C bus, it can create unusual states which the other I2C bus master driver needs to handle. Only for debugging! Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
* i2c-cht-wc: Add device-properties for fusb302 integrationHans de Goede2017-10-271-0/+5
| | | | | | | | | | | | | | Add device-properties to make the bq24292i charger connected to the bus get its input-current-limit from the fusb302 Type-C port controller which is used on boards with the cht-wc PMIC, as well as regulator_init_data for the 5V boost converter on the bq24292i. Since this means we now hook-up the bq24292i to the fusb302 Type-C port controller add a check for the ACPI device which instantiates the fusb302. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: i801: Add support for Intel Cedar ForkJarkko Nikula2017-10-051-0/+1
| | | | | | | | Add PCI ID for Intel Cedar Fork PCH. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: i2c-stm32f7: add driverPierre-Yves MORDRET2017-09-141-0/+10
| | | | | | | | This patch adds initial support for the STM32F7 I2C controller. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: altera: Add Altera I2C Controller driverThor Thayer2017-09-131-0/+10
| | | | | | | | | Add driver support for the Altera I2C Controller. The I2C controller is soft IP for use in FPGAs. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* Merge branch 'i2c/for-4.14' of ↵Linus Torvalds2017-09-091-0/+15
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - new drivers for Spreadtrum I2C, Intel Cherry Trail Whiskey Cove SMBUS - quite some driver updates - cleanups for the i2c-mux subsystem - some subsystem-wide constification - further cleanup of include/linux/i2c * 'i2c/for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (50 commits) i2c: sprd: Fix undefined reference errors i2c: nomadik: constify amba_id i2c: versatile: Make i2c_algo_bit_data const i2c: busses: make i2c_adapter_quirks const i2c: busses: make i2c_adapter const i2c: busses: make i2c_algorithm const i2c: Add Spreadtrum I2C controller driver dt-bindings: i2c: Add Spreadtrum I2C controller documentation i2c-cht-wc: make cht_wc_i2c_adap_driver static MAINTAINERS: Add entry for drivers/i2c/busses/i2c-cht-wc.c i2c: aspeed: Retain delay/setup/hold values when configuring bus frequency dt-bindings: i2c: eeprom: Document vendor to be used and deprecated ones i2c: i801: Restore the presence state of P2SB PCI device after reading BAR MAINTAINERS: drop entry for Blackfin I2C and Sonic's email blackfin: merge the two TWI header files i2c: davinci: Preserve return value of devm_clk_get i2c: mediatek: Add i2c compatible for MediaTek MT7622 dt-bindings: i2c: Add MediaTek MT7622 i2c binding dt-bindings: i2c: modify information formats i2c: mux: i2c-arb-gpio-challenge: allow compiling w/o OF support ...
| * i2c: sprd: Fix undefined reference errorsBaolin Wang2017-08-311-1/+1
| | | | | | | | | | | | | | | | Since the i2c driver of Spreadtrum can not be build as one module, thus it should depend on CONFIG_I2C is build in. Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: Add Spreadtrum I2C controller driverBaolin Wang2017-08-291-0/+7
| | | | | | | | | | | | | | | | This patch adds the I2C controller driver for Spreadtrum SC9860 platform. Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c-cht-wc: Add Intel Cherry Trail Whiskey Cove SMBUS controller driverHans de Goede2017-08-131-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Intel Cherry Trail Whiskey Cove PMIC does not contain a builtin battery charger, instead boards with this PMIC use an external TI bq24292i charger IC, which is connected to a SMBUS controller built into the PMIC. This commit adds an i2c-bus driver for the PMIC's builtin SMBUS controller. The probe function for this i2c-bus will also register an i2c-client for the TI bq24292i charger after the i2c-bus has been registered. Note that several device-properties are set on the client-device to tell the bq24190 power-supply driver to integrate the Whiskey Cove PMIC and e.g. use the PMIC's BC1.2 detection (through extcon) to determine the maximum input current. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* | i2c: allow i2c-versatile for ARM MPS platformsRussell King2017-07-311-1/+1
|/ | | | | | | Allow i2c-versatile to be enabled for ARM MPS platforms. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: designware: Let slave adapter support be optionalJarkko Nikula2017-07-041-1/+0Star
| | | | | | | | | | | | | | Only certain system configurations may use the I2C slave mode so let the support be optional. This allow reducing module size if needed: text data bss dec hex filename 10328 1336 16 11680 2da0 drivers/i2c/busses/i2c-designware-core.ko 7222 1136 8 8366 20ae drivers/i2c/busses/i2c-designware-core.ko Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Luis Oliveira <lolivei@synopsys.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: designware: add SLAVE mode functionsLuis Oliveira2017-06-271-1/+13
| | | | | | | | | | | | | | | | | | - Changes in Kconfig to enable I2C_DESIGNWARE_SLAVE support - Slave functions added to core library file - Slave abort sources added to common source file - New driver: i2c-designware-slave added - Changes in the Makefile to compile the I2C_DESIGNWARE_SLAVE module when supported by the architecture. All the SLAVE flow is added but it is not enabled via platform driver. Signed-off-by: Luis Oliveira <lolivei@synopsys.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> [wsa: made a function static and one-lined a message] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: zx2967: drop COMPILE_TEST dependencyShawn Guo2017-06-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | 0-DAY kernel test reports the following build issue on IA64 architecture with allmodconfig. drivers/i2c/busses/i2c-zx2967.c: In function 'zx2967_i2c_writesb': >> drivers/i2c/busses/i2c-zx2967.c:87:2: error: implicit declaration of function 'writesb' [-Werror=implicit-function-declaration] writesb(i2c->reg_base + reg, data, len); ^~~~~~~ drivers/i2c/busses/i2c-zx2967.c: In function 'zx2967_i2c_readsb': >> drivers/i2c/busses/i2c-zx2967.c:93:2: error: implicit declaration of function 'readsb' [-Werror=implicit-function-declaration] readsb(i2c->reg_base + reg, data, len); ^~~~~~ cc1: some warnings being treated as errors It's caused by that writesb/readsb are unavailable on IA64 architecture. Let's drop COMPILE_TEST dependency to avoid the build issue. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: zx2967: add i2c controller driver for ZTE's zx2967 familyBaoyou Xie2017-06-231-0/+9
| | | | | | | | | | This patch adds i2c controller driver for ZTE's zx2967 family. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: aspeed: added driver for Aspeed I2CBrendan Higgins2017-06-231-0/+10
| | | | | | | | Added initial master support for Aspeed I2C controller. Supports fourteen busses present in AST24XX and AST25XX BMC SoCs by Aspeed. Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: i801: Add support for Intel Cannon LakeSrinivas Pandruvada2017-06-191-0/+2
| | | | | | | | | | Added SMBUS PCI Ids for SMBUS for Cannon Lake PCH. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [jarkko.nikula@linux.intel.com: Add entries to Documentation and Kconfig. Cover Cannon Lake-H too] Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: xlp9xx: update for ARCH_THUNDER2Jayachandran C2017-03-231-1/+1
| | | | | | | | | | | | | ARCH_VULCAN arm64 platform (for Broadcom Vulcan ARM64 processors) has been discontinued. Cavium's ThunderX2 CN99XX (ARCH_THUNDER2) will be the next revision of the platform. Update compile dependencies and ACPI ID to reflect this change. There is not need to retain ARCH_VULCAN since the Vulcan processor was never in production and the config option will be removed soon. Signed-off-by: Jayachandran C <jnair@caviumnetworks.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: tegra-bpmp: Enable Tegra BPMP I2C adapterJon Hunter2017-03-231-0/+1
| | | | | | | | | | Enable the Tegra BPMP I2C adapter by default if the Tegra BPMP itself is enabled. This adapter is used as the I2C interface for the PMIC on the Tegra186 Jetson-TX2 platform. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: Add Tegra BPMP I2C proxy driverShardar Shariff Md2017-02-201-0/+11
| | | | | | | | | | | | Add Tegra BPMP I2C driver. The BPMP is the boot and power management processor embedded in Tegra SoCs. In newer SoC versions, access to one of the I2C busses goes via the BPMP, requiring a different "proxy" I2C driver that accesses the bus via the real I2C driver embedded in the BPMP firmware. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: i801: Add support for Intel Gemini LakeMika Westerberg2017-02-091-0/+1
| | | | | | | | Intel Gemini Lake has the same SMBus host controller than Intel Broxton. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-06-28 13:57:51 +0200