summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
Commit message (Collapse)AuthorAgeFilesLines
* bnx2x: Fix VF's VLAN reconfiguration in reload.Manish Chopra2019-08-181-0/+2
| | | | | | | | | | | | | | | | | | Commit 04f05230c5c13 ("bnx2x: Remove configured vlans as part of unload sequence."), introduced a regression in driver that as a part of VF's reload flow, VLANs created on the VF doesn't get re-configured in hardware as vlan metadata/info was not getting cleared for the VFs which causes vlan PING to stop. This patch clears the vlan metadata/info so that VLANs gets re-configured back in the hardware in VF's reload flow and PING/traffic continues for VLANs created over the VFs. Fixes: 04f05230c5c13 ("bnx2x: Remove configured vlans as part of unload sequence.") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Sudarsana Kalluru <skalluru@marvell.com> Signed-off-by: Shahed Shaikh <shshaikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2019-05-081-2/+1Star
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: "Highlights: 1) Support AES128-CCM ciphers in kTLS, from Vakul Garg. 2) Add fib_sync_mem to control the amount of dirty memory we allow to queue up between synchronize RCU calls, from David Ahern. 3) Make flow classifier more lockless, from Vlad Buslov. 4) Add PHY downshift support to aquantia driver, from Heiner Kallweit. 5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces contention on SLAB spinlocks in heavy RPC workloads. 6) Partial GSO offload support in XFRM, from Boris Pismenny. 7) Add fast link down support to ethtool, from Heiner Kallweit. 8) Use siphash for IP ID generator, from Eric Dumazet. 9) Pull nexthops even further out from ipv4/ipv6 routes and FIB entries, from David Ahern. 10) Move skb->xmit_more into a per-cpu variable, from Florian Westphal. 11) Improve eBPF verifier speed and increase maximum program size, from Alexei Starovoitov. 12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit spinlocks. From Neil Brown. 13) Allow tunneling with GUE encap in ipvs, from Jacky Hu. 14) Improve link partner cap detection in generic PHY code, from Heiner Kallweit. 15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan Maguire. 16) Remove SKB list implementation assumptions in SCTP, your's truly. 17) Various cleanups, optimizations, and simplifications in r8169 driver. From Heiner Kallweit. 18) Add memory accounting on TX and RX path of SCTP, from Xin Long. 19) Switch PHY drivers over to use dynamic featue detection, from Heiner Kallweit. 20) Support flow steering without masking in dpaa2-eth, from Ioana Ciocoi. 21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri Pirko. 22) Increase the strict parsing of current and future netlink attributes, also export such policies to userspace. From Johannes Berg. 23) Allow DSA tag drivers to be modular, from Andrew Lunn. 24) Remove legacy DSA probing support, also from Andrew Lunn. 25) Allow ll_temac driver to be used on non-x86 platforms, from Esben Haabendal. 26) Add a generic tracepoint for TX queue timeouts to ease debugging, from Cong Wang. 27) More indirect call optimizations, from Paolo Abeni" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits) cxgb4: Fix error path in cxgb4_init_module net: phy: improve pause mode reporting in phy_print_status dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings net: macb: Change interrupt and napi enable order in open net: ll_temac: Improve error message on error IRQ net/sched: remove block pointer from common offload structure net: ethernet: support of_get_mac_address new ERR_PTR error net: usb: smsc: fix warning reported by kbuild test robot staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check net: dsa: support of_get_mac_address new ERR_PTR error net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats vrf: sit mtu should not be updated when vrf netdev is the link net: dsa: Fix error cleanup path in dsa_init_module l2tp: Fix possible NULL pointer dereference taprio: add null check on sched_nest to avoid potential null pointer dereference net: mvpp2: cls: fix less than zero check on a u32 variable net_sched: sch_fq: handle non connected flows net_sched: sch_fq: do not assume EDT packets are ordered net: hns3: use devm_kcalloc when allocating desc_cb net: hns3: some cleanup for struct hns3_enet_ring ...
| * net: remove 'fallback' argument from dev->ndo_select_queue()Paolo Abeni2019-03-201-2/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After the previous patch, all the callers of ndo_select_queue() provide as a 'fallback' argument netdev_pick_tx. The only exceptions are nested calls to ndo_select_queue(), which pass down the 'fallback' available in the current scope - still netdev_pick_tx. We can drop such argument and replace fallback() invocation with netdev_pick_tx(). This avoids an indirect call per xmit packet in some scenarios (TCP syn, UDP unconnected, XDP generic, pktgen) with device drivers implementing such ndo. It also clean the code a bit. Tested with ixgbe and CONFIG_FCOE=m With pktgen using queue xmit: threads vanilla patched (kpps) (kpps) 1 2334 2428 2 4166 4278 4 7895 8100 v1 -> v2: - rebased after helper's name change Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | drivers: Remove explicit invocations of mmiowb()Will Deacon2019-04-081-4/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mmiowb() is now implied by spin_unlock() on architectures that require it, so there is no reason to call it from driver code. This patch was generated using coccinelle: @mmiowb@ @@ - mmiowb(); and invoked as: $ for d in drivers include/linux/qed sound; do \ spatch --include-headers --sp-file mmiowb.cocci --dir $d --in-place; done NOTE: mmiowb() has only ever guaranteed ordering in conjunction with spin_unlock(). However, pairing each mmiowb() removal in this patch with the corresponding call to spin_unlock() is not at all trivial, so there is a small chance that this change may regress any drivers incorrectly relying on mmiowb() to order MMIO writes between CPUs using lock-free synchronisation. If you've ended up bisecting to this commit, you can reintroduce the mmiowb() calls using wmb() instead, which should restore the old behaviour on all architectures other than some esoteric ia64 systems. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
* | drivers: Remove useless trailing comments from mmiowb() invocationsWill Deacon2019-04-081-1/+1
|/ | | | | | | | | In preparation for using coccinelle to remove all mmiowb() instances from drivers, remove all trailing comments since they won't be picked up by spatch later on and will end up being preserved in the code. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
* cross-tree: phase out dma_zalloc_coherent() on headersLuis Chamberlain2019-01-081-1/+1
| | | | | | | | | | The last few stragglers coccinelle doesn't pick up are on driver specific header files. Phase those out as well as dma_alloc_coherent() zeroes out the memory as well now too. Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
* bnx2x: Add VF spoof-checking configurationShahed Shaikh2018-09-211-0/+1
| | | | | | | | | Add support for `ndo_set_vf_spoofchk' to allow PF control over its VF spoof-checking configuration. Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: allow ndo_select_queue to pass netdevAlexander Duyck2018-07-091-1/+2
| | | | | | | | | | | | This patch makes it so that instead of passing a void pointer as the accel_priv we instead pass a net_device pointer as sb_dev. Making this change allows us to pass the subordinate device through to the fallback function eventually so that we can keep the actual code in the ndo_select_queue call as focused on possible on the exception cases. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* bnx2x: Eliminate duplicate barriers on weakly-ordered archsSinan Kaya2018-03-261-2/+2
| | | | | | | | | | | | | | Code includes wmb() followed by writel(). writel() already has a barrier on some architectures like arm64. This ends up CPU observing two barriers back to back before executing the register write. Since code already has an explicit barrier call, changing writel() to writel_relaxed(). Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sched: get rid of struct tc_to_netdevJiri Pirko2017-08-071-1/+1
| | | | | | | | | | | Get rid of struct tc_to_netdev which is now just unnecessary container and rather pass per-type structures down to drivers directly. Along with that, consolidate the naming of per-type structure variables in cls_*. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sched: push cls related args into cls_common structureJiri Pirko2017-08-071-1/+0Star
| | | | | | | | | | As ndo_setup_tc is generic offload op for whole tc subsystem, does not really make sense to have cls-specific args. So move them under cls_common structurure which is embedded in all cls structs. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sched: make type an argument for ndo_setup_tcJiri Pirko2017-08-071-2/+3
| | | | | | | | | Since the type is always present, push it to be a separate argument to ndo_setup_tc. On the way, name the type enum and use it for arg type. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: propagate tc filter chain index down the ndo_setup_tc callJiri Pirko2017-06-081-2/+2
| | | | | | | | | | | We need to push the chain index down to the drivers, so they have the information to which chain the rule belongs. For now, no driver supports multichain offload, so only chain 0 is supported. This is needed to prevent chain squashes during offload for now. Later this will be used to implement multichain offload. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Update API for VF vlan protocol 802.1ad supportMoshe Shemesh2016-09-241-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Introduce new rtnl UAPI that exposes a list of vlans per VF, giving the ability for user-space application to specify it for the VF, as an option to support 802.1ad. We adjusted IP Link tool to support this option. For future use cases, the new UAPI supports multiple vlans. For now we limit the list size to a single vlan in kernel. Add IFLA_VF_VLAN_LIST in addition to IFLA_VF_VLAN to keep backward compatibility with older versions of IP Link tool. Add a vlan protocol parameter to the ndo_set_vf_vlan callback. We kept 802.1Q as the drivers' default vlan protocol. Suitable ip link tool command examples: Set vf vlan protocol 802.1ad: ip link set eth0 vf 1 vlan 100 proto 802.1ad Set vf to VST (802.1Q) mode: ip link set eth0 vf 1 vlan 100 proto 802.1Q Or by omitting the new parameter ip link set eth0 vf 1 vlan 100 Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: rework setup_tc ndo op to consume general tc operandJohn Fastabend2016-02-171-1/+2
| | | | | | | | | | | | | | | This patch updates setup_tc so we can pass additional parameters into the ndo op in a generic way. To do this we provide structured union and type flag. This lets each classifier and qdisc provide its own set of attributes without having to add new ndo ops or grow the signature of the callback. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: rework ndo tc op to consume additional qdisc handle parameterJohn Fastabend2016-02-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | The ndo_setup_tc() op was added to support drivers offloading tx qdiscs however only support for mqprio was ever added. So we only ever added support for passing the number of traffic classes to the driver. This patch generalizes the ndo_setup_tc op so that a handle can be provided to indicate if the offload is for ingress or egress or potentially even child qdiscs. CC: Murali Karicheri <m-karicheri2@ti.com> CC: Shradha Shah <sshah@solarflare.com> CC: Or Gerlitz <ogerlitz@mellanox.com> CC: Ariel Elior <ariel.elior@qlogic.com> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Bruce Allan <bruce.w.allan@intel.com> CC: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Add Geneve inner-RSS supportYuval Mintz2016-02-171-2/+9
| | | | | | | | | | | | This adds the ability to perform RSS hashing based on encapsulated headers for a geneve-encapsulated packet. This also changes the Vxlan implementation in bnx2x to be uniform for both vxlan and geneve [from configuration perspective]. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: remove bnx2x_low_latency_recv() supportEric Dumazet2015-11-181-7/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Switch to native NAPI polling, as this reduces overhead and complexity. Normal path is faster, since one cmpxchg() is not anymore requested, and busy polling with the NAPI polling has same performance. Tested: lpk50:~# cat /proc/sys/net/core/busy_read 70 lpk50:~# nstat >/dev/null;./netperf -H lpk55 -t TCP_RR;nstat MIGRATED TCP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to lpk55.prod.google.com () port 0 AF_INET : first burst 0 Local /Remote Socket Size Request Resp. Elapsed Trans. Send Recv Size Size Time Rate bytes Bytes bytes bytes secs. per sec 16384 87380 1 1 10.00 40095.07 16384 87380 IpInReceives 401062 0.0 IpInDelivers 401062 0.0 IpOutRequests 401079 0.0 TcpActiveOpens 7 0.0 TcpPassiveOpens 3 0.0 TcpAttemptFails 3 0.0 TcpEstabResets 5 0.0 TcpInSegs 401036 0.0 TcpOutSegs 401052 0.0 TcpOutRsts 38 0.0 UdpInDatagrams 26 0.0 UdpOutDatagrams 27 0.0 Ip6OutNoRoutes 1 0.0 TcpExtDelayedACKs 1 0.0 TcpExtTCPPrequeued 98 0.0 TcpExtTCPDirectCopyFromPrequeue 98 0.0 TcpExtTCPHPHits 4 0.0 TcpExtTCPHPHitsToUser 98 0.0 TcpExtTCPPureAcks 5 0.0 TcpExtTCPHPAcks 101 0.0 TcpExtTCPAbortOnData 6 0.0 TcpExtBusyPollRxPackets 400832 0.0 TcpExtTCPOrigDataSent 400983 0.0 IpExtInOctets 21273867 0.0 IpExtOutOctets 21261254 0.0 IpExtInNoECTPkts 401064 0.0 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Fix vxlan endianity issueYuval Mintz2015-08-201-1/+1
| | | | | | | | | Commit f34fa14cc033 ("bnx2x: Add vxlan RSS support") has introduced an endianity issue when passing the vxlan UDP port to the HW. Reported-by: <fengguang.wu@intel.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Add vxlan RSS supportRajesh Borundia2015-08-181-0/+2
| | | | | | | | | | | | | Latest FW submission added some vxlan offload capabilities to our device. This patch adds the ability to connect to the vxlan NDOs and configure the UDP port associated with it in the HW. The device would now be capable of performing RSS according to the inner headers of the vxlan packets. Signed-off-by: Rajesh Borundia <Rajesh.Borundia@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Add BD support for storageYuval Mintz2015-08-071-0/+12
| | | | | | | | | Commit 230d00eb4bfe ("bnx2x: new Multi-function mode - BD") adds support for the new mode in bnx2x. This expands this support by implementing APIs required by our storage drivers to support that mode. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: add vlan filtering offloadYuval Mintz2015-07-301-1/+12
| | | | | | | | | | | | | | Current driver always uses vlan-promisc mode, i.e., it receives both tagged and untagged traffic and lets the network stack drop packets tagged with unrequested vlan tags. This patch implements vlan-filtering offload in the driver - Unless explicitly configured to promisc mode, only untagged packets or packets tagged with requested vlans would reach the Rx flow. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: new Multi-function mode - BDYuval Mintz2015-07-221-0/+36
| | | | | | | | | | This adds support to a new multi-function mode, enabling driver to initialize such devices and correctly interacting with management FW for fully utilizing their features. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Rebrand from 'broadcom' into 'qlogic'Yuval Mintz2015-07-221-1/+3
| | | | | | | | | | | | bnx2x still appears as a Broadcom driver even though the devices it utilizes belong to Qlogic for more than a year. This patch changes the various headers and the device strings to indicate the correct ownership of the device. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Utilize FW 7.12.30Yuval Mintz2015-07-221-3/+1Star
| | | | | | | | | | | | | | | | | | | This moves bnx2x into using 7.12.30 FW. Said firmware fixes the following: - Packets from a VF with pvid configured which were sent with a different vlan were transmitted instead of being discarded. - FCoE traffic might not recover after a failue while there's traffic to another function. In addition, this FW opens the door for the driver to implement several new features; Specifically, this enhances the device's support for encapsulated packets and will allow vxlan/geneve offloads to be added in the future, as well as vlan filtering offload. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: fix DMA API usageMichal Schmidt2015-06-291-10/+2Star
| | | | | | | | | | | | | | | | | | | | With CONFIG_DMA_API_DEBUG=y bnx2x triggers the error "DMA-API: device driver frees DMA memory with wrong function". On archs where PAGE_SIZE > SGE_PAGE_SIZE it also triggers "DMA-API: device driver frees DMA memory with different size". Fix this by making the mapping and unmapping symmetric: - Do not map the whole pool page at once. Instead map the SGE_PAGE_SIZE-sized pieces individually, so they can be unmapped in the same manner. - What's mapped using dma_map_page() must be unmapped using dma_unmap_page(). Tested on ppc64. Fixes: 4cace675d687 ("bnx2x: Alloc 4k fragment for each rx ring buffer element") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Alloc 4k fragment for each rx ring buffer elementGabriel Krisman Bertazi2015-06-021-3/+28
| | | | | | | | | | | | | | | | | | | | | | The driver allocates one page for each buffer on the rx ring, which is too much on architectures like ppc64 and can cause unexpected allocation failures when the system is under stress. Now, we keep a memory pool per queue, and if the architecture's PAGE_SIZE is greater than 4k, we fragment pages and assign each 4k segment to a ring element, which reduces the overall memory consumption on such architectures. This helps avoiding errors like the example below: [bnx2x_alloc_rx_sge:435(eth1)]Can't alloc sge [c00000037ffeb900] [d000000075eddeb4] .bnx2x_alloc_rx_sge+0x44/0x200 [bnx2x] [c00000037ffeb9b0] [d000000075ee0b34] .bnx2x_fill_frag_skb+0x1ac/0x460 [bnx2x] [c00000037ffebac0] [d000000075ee11f0] .bnx2x_tpa_stop+0x160/0x2e8 [bnx2x] [c00000037ffebb90] [d000000075ee1560] .bnx2x_rx_int+0x1e8/0xc30 [bnx2x] [c00000037ffebcd0] [d000000075ee2084] .bnx2x_poll+0xdc/0x3d8 [bnx2x] (unreliable) Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Acked-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: merge fp->disable_tpa with fp->modeMichal Schmidt2015-04-291-1/+1
| | | | | | | It is simpler to have the TPA mode as one three-state variable. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: New multi-function mode: UFPYuval Mintz2014-09-191-0/+6
| | | | | | | | | | | | | | Add support for a new multi-function mode based on the Unified Fabric Port system specifications. Support includes configuration of: 1. Outer vlan tags. 2. Bandwidth settings. 3. Virtual link enable/disable. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Dmitry Kravkov <Dmitry.Kravkov@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Changes with storage & MAC macrosDmitry Kravkov2014-09-191-8/+0Star
| | | | | | | | | | | | | | Rearrange macros to query for storage-only modes in different MF environment. Improves the readibility and maintainability of the code. E.g.: - if (IS_MF_STORAGE_SD(bp) || IS_MF_FCOE_AFEX(bp)) + if (IS_MF_STORAGE_ONLY(bp)) In addition, this removes the need for bnx2x_is_valid_ether_addr(). Signed-off-by: Dmitry Kravkov <Dmitry.Kravkov@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Utilize FW 7.10.51Dmitry Kravkov2014-08-221-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | - (L2) In some multi-function configurations, inter-PF and inter-VF Tx switching is incorrectly enabled. - (L2) Wrong assert code in FLR final cleanup in case it is sent not after FLR. - (L2) Chip may stall in very rare cases under heavy traffic with FW GRO enabled. - (L2) VF malicious notification error fixes. - (L2) Default gre tunnel to IPGRE which allows proper RSS for IPGRE packets, L2GRE traffic will reach single queue. - (FCoE) Fix data being placed in wrong buffer when corrupt FCoE frame is received. - (FCoE) Burst of FIP packets with destination MAC of ALL-FCF_MACs causes FCoE traffic to stop. Signed-off-by: Dmitry Kravkov <Dmitry.Kravkov@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: update MAINTAINERS for bnx2x and e-mail addressesAriel Elior2014-05-311-1/+1
| | | | | | | | | | | | | The bnx2x development team has transferred from Broadcom to Qlogic. This patch updates some obsolete email addresses to usable ones. The bnx2x files contain headers with legal information from Broadcom. Qlogic Legal depratment is taking their time coming up with their own legal info. So this patch only updates contact information. I will follow up with a patch for the headers once I have the required info. Signed-off-by: Ariel Elior <ariel.elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bnx2x: include irq.h for irqreturn_t definitionsJosh Boyer2014-04-031-0/+1
| | | | | | | | | | | | | | | | | | The bnx2x driver fails to build on ARM with: In file included from drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c:28:0: drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h:243:1: error: unknown type name 'irqreturn_t' irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance); ^ drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h:251:1: error: unknown type name 'irqreturn_t' irqreturn_t bnx2x_interrupt(int irq, void *dev_instance); ^ Nothing in bnx2x_link.c or bnx2x_cmn.h is explicitly including the irq definitions, so we add an include of linux/irq.h to pick them up. Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Remove hidden flow control goto from BNX2X_ALLOC macrosJoe Perches2014-02-251-25/+20Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BNX2X_ALLOC macros use "goto alloc_mem_err" so these labels appear unused in some functions. Expand these macros in-place via coccinelle and some typing. Update the macros to use statement expressions and remove the BNX2X_ALLOC macro. This adds some > 80 char lines. $ cat bnx2x_pci_alloc.cocci @@ expression e1; expression e2; expression e3; @@ - BNX2X_PCI_ALLOC(e1, e2, e3); + e1 = BNX2X_PCI_ALLOC(e2, e3); if (!e1) goto alloc_mem_err; @@ expression e1; expression e2; expression e3; @@ - BNX2X_PCI_FALLOC(e1, e2, e3); + e1 = BNX2X_PCI_FALLOC(e2, e3); if (!e1) goto alloc_mem_err; @@ expression e1; expression e2; @@ - BNX2X_ALLOC(e1, e2); + e1 = kzalloc(e2, GFP_KERNEL); if (!e1) goto alloc_mem_err; @@ expression e1; expression e2; expression e3; @@ - kzalloc(sizeof(e1) * e2, e3) + kcalloc(e2, sizeof(e1), e3) @@ expression e1; expression e2; expression e3; @@ - kzalloc(e1 * sizeof(e2), e3) + kcalloc(e1, sizeof(e2), e3) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-02-191-1/+1
|\ | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/bonding/bond_3ad.h drivers/net/bonding/bond_main.c Two minor conflicts in bonding, both of which were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
| * netdevice: add queue selection fallback handler for ndo_select_queueDaniel Borkmann2014-02-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a new argument for ndo_select_queue() callback that passes a fallback handler. This gets invoked through netdev_pick_tx(); fallback handler is currently __netdev_pick_tx() as most drivers invoke this function within their customized implementation in case for skbs that don't need any special handling. This fallback handler can then be replaced on other call-sites with different queue selection methods (e.g. in packet sockets, pktgen etc). This also has the nice side-effect that __netdev_pick_tx() is then only invoked from netdev_pick_tx() and export of that function to modules can be undone. Suggested-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2x: (semantic) revise scheduling of sp_rtnlYuval Mintz2014-02-131-0/+3
|/ | | | | | | | | | This removes the various points where the driver use bit operations in order to schedule the sp_rtnl_task from the code, adding a single utility function that does it instead. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: fix L2-GRE TCP issuesDmitry Kravkov2014-02-051-1/+1
| | | | | | | | | | | | When configuring GRE tunnel using OVS, tcp stream is distributed over all RSS queues which may cause TCP reordering. It happens since OVS uses L2GRE protocol when kernel gre uses IPGRE. Patch defaults gre tunnel to L2GRE which allows proper RSS for L2GRE packets and (implicitly) disables RSS for IPGRE traffic. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-01-141-1/+2
|\
| * net: core: explicitly select a txq before doing l2 forwardingJason Wang2014-01-101-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the tx queue were selected implicitly in ndo_dfwd_start_xmit(). The will cause several issues: - NETIF_F_LLTX were removed for macvlan, so txq lock were done for macvlan instead of lower device which misses the necessary txq synchronization for lower device such as txq stopping or frozen required by dev watchdog or control path. - dev_hard_start_xmit() was called with NULL txq which bypasses the net device watchdog. - dev_hard_start_xmit() does not check txq everywhere which will lead a crash when tso is disabled for lower device. Fix this by explicitly introducing a new param for .ndo_select_queue() for just selecting queues in the case of l2 forwarding offload. netdev_pick_tx() was also extended to accept this parameter and dev_queue_xmit_accel() was used to do l2 forwarding transmission. With this fixes, NETIF_F_LLTX could be preserved for macvlan and there's no need to check txq against NULL in dev_hard_start_xmit(). Also there's no need to keep a dedicated ndo_dfwd_start_xmit() and we can just reuse the code of dev_queue_xmit() to do the transmission. In the future, it was also required for macvtap l2 forwarding support since it provides a necessary synchronization method. Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: e1000-devel@lists.sourceforge.net Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2x: namespace and dead code cleanupsstephen hemminger2014-01-131-122/+2Star
|/ | | | | | | | | | | | | | | | | | | | | | | | | Fix a bunch of whole lot of namespace issues with the Broadcom bnx2x driver found by running 'make namespacecheck' * global variables must be prefixed with bnx2x_ naming a variable int_mode, or num_queue is invitation to disaster * make local functions static * move some inline's used in one file out of header (this driver has a bad case of inline-itis) * remove resulting dead code fallout bnx2x_pfc_statistic, bnx2x_emac_get_pfc_stat bnx2x_init_vlan_mac_obj, Looks like vlan mac support in this driver was a botch from day one either never worked, or not implemented or missing support functions Compile tested only. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: VF RSS support - VF sideAriel Elior2013-09-051-3/+4
| | | | | | | | | | In this patch capabilities are added to the Vf driver to request multiple queues over the VF PF channel, and the logic for requesting rss configuration for said queues. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilong Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers:net: Convert dma_alloc_coherent(...__GFP_ZERO) to dma_zalloc_coherentJoe Perches2013-08-301-2/+1Star
| | | | | | | | | | | | | | | | | | | | | __GFP_ZERO is an uncommon flag and perhaps is better not used. static inline dma_zalloc_coherent exists so convert the uses of dma_alloc_coherent with __GFP_ZERO to the more common kernel style with zalloc. Remove memset from the static inline dma_zalloc_coherent and add just one use of __GFP_ZERO instead. Trivially reduces the size of the existing uses of dma_zalloc_coherent. Realign arguments as appropriate. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Revising locking scheme for MAC configurationYuval Mintz2013-08-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On very rare occasions, repeated load/unload stress test in the presence of our storage driver (bnx2i/bnx2fc) causes a kernel panic in bnx2x code (NULL pointer dereference). Stack traces indicate the issue happens during MAC configuration; thorough code review showed that indeed several races exist in which one thread can iterate over the list of configured MACs while another deletes entries from the same list. This patch adds a varient on the single-writer/Multiple-reader lock mechanism - It utilizes an already exsiting bottom-half lock, using it so that Whenever a writer is unable to continue due to the existence of another writer/reader, it pends its request for future deliverance. The writer / last readers will check for the existence of such requests and perform them instead of the original initiator. This prevents the writer from having to sleep while waiting for the lock to be accessible, which might cause deadlocks given the locks already held by the writer. Another result of this patch is that setting of Rx Mode is now made in sleepable context - Setting of Rx Mode is made under a bottom-half lock, which was always nontrivial for the bnx2x driver, as the HW/FW configuration requires wait for completions. Since sleep was impossible (due to the sleepless-context), various mechanisms were utilized to prevent the calling thread from sleep, but the truth was that when the caller thread (i.e, the one calling ndo_set_rx_mode()) returned, the Rx mode was still not set in HW/FW. bnx2x_set_rx_mode() will now overtly schedule for the Rx changes to be configured by the sp_rtnl_task which hold the RTNL lock and is sleepable context. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: replace mechanism to check for next available packetDmitry Kravkov2013-06-201-7/+19
| | | | | | | | | | Check next packet availability by validating that HW has finished CQE placement. This saves latency of another dma transaction performed to update SB indexes. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: add support for ndo_ll_pollDmitry Kravkov2013-06-201-4/+19
| | | | | | | | | | | | Adds ndo_ll_poll method and locking for FPs between LL and the napi. When receiving a packet we use skb_mark_ll to record the napi it came from. Add each napi to the napi_hash right after netif_napi_add(). Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Revise printsYuval Mintz2013-06-031-7/+9
| | | | | | | | | | This patch revises many bnx2x prints - mainly fixing print typos and adding some new debug prints (mostly for parity issues). Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Semantic removal and beautificationYuval Mintz2013-06-031-3/+0Star
| | | | | | | | | | | | | | This patch introduces several small changes to the driver, none which actually change any flow: 1. Removes prototypes of unexisting functions and unused defines. 2. Fixes alignment and spacing issues. 3. Changes numeric usage into constants. 4. Remove unnecessary parenthesis. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Revise comments and alignmentYuval Mintz2013-06-031-2/+2
| | | | | | | | | | This patch correct various typos, fix comments conventions and adds/removes a few comments. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Semantic change of empty linesYuval Mintz2013-06-031-3/+0Star
| | | | | | | | | | This patch removes unnecessary blank lines and adds a few where such are needed (between variable declarations and code) Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-05-23 10:23:09 +0200