summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
Commit message (Collapse)AuthorAgeFilesLines
* ixgbe: fix possible deadlock in ixgbe_service_task()Taehee Yoo2019-08-091-4/+1Star
| | | | | | | | | | | | ixgbe_service_task() calls unregister_netdev() under rtnl_lock(). But unregister_netdev() internally calls rtnl_lock(). So deadlock would occur. Fixes: 59dd45d550c5 ("ixgbe: firmware recovery mode") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers: net: use flow block APIPablo Neira Ayuso2019-07-091-1/+4
| | | | | | | | | | | | | This patch updates flow_block_cb_setup_simple() to use the flow block API. Several drivers are also adjusted to use it. This patch introduces the per-driver list of flow blocks to account for blocks that are already in use. Remove tc_block_offload alias. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: flow_offload: add flow_block_cb_setup_simple()Pablo Neira Ayuso2019-07-091-22/+5Star
| | | | | | | | | | | | | | | | | | | | | | | Most drivers do the same thing to set up the flow block callbacks, this patch adds a helper function to do this. This preparation patch reduces the number of changes to adapt the existing drivers to use the flow block callback API. This new helper function takes a flow block list per-driver, which is set to NULL until this driver list is used. This patch also introduces the flow_block_command and flow_block_binder_type enumerations, which are renamed to use FLOW_BLOCK_* in follow up patches. There are three definitions (aliases) in order to reduce the number of updates in this patch, which go away once drivers are fully adapted to use this flow block API. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: add tracking of AF_XDP zero-copy state for each queue pairJan Sokolowski2019-06-051-0/+6
| | | | | | | | | | | | Here, we add a bitmap to the ixgbe_adapter that tracks if a certain queue pair has been "zero-copy enabled" via the ndo_bpf. The bitmap is used in ixgbe_xsk_umem, and enables zero-copy if and only if XDP is enabled, the corresponding qid in the bitmap is set, and the umem is non-NULL; Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2019-05-081-6/+5Star
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: "Highlights: 1) Support AES128-CCM ciphers in kTLS, from Vakul Garg. 2) Add fib_sync_mem to control the amount of dirty memory we allow to queue up between synchronize RCU calls, from David Ahern. 3) Make flow classifier more lockless, from Vlad Buslov. 4) Add PHY downshift support to aquantia driver, from Heiner Kallweit. 5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces contention on SLAB spinlocks in heavy RPC workloads. 6) Partial GSO offload support in XFRM, from Boris Pismenny. 7) Add fast link down support to ethtool, from Heiner Kallweit. 8) Use siphash for IP ID generator, from Eric Dumazet. 9) Pull nexthops even further out from ipv4/ipv6 routes and FIB entries, from David Ahern. 10) Move skb->xmit_more into a per-cpu variable, from Florian Westphal. 11) Improve eBPF verifier speed and increase maximum program size, from Alexei Starovoitov. 12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit spinlocks. From Neil Brown. 13) Allow tunneling with GUE encap in ipvs, from Jacky Hu. 14) Improve link partner cap detection in generic PHY code, from Heiner Kallweit. 15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan Maguire. 16) Remove SKB list implementation assumptions in SCTP, your's truly. 17) Various cleanups, optimizations, and simplifications in r8169 driver. From Heiner Kallweit. 18) Add memory accounting on TX and RX path of SCTP, from Xin Long. 19) Switch PHY drivers over to use dynamic featue detection, from Heiner Kallweit. 20) Support flow steering without masking in dpaa2-eth, from Ioana Ciocoi. 21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri Pirko. 22) Increase the strict parsing of current and future netlink attributes, also export such policies to userspace. From Johannes Berg. 23) Allow DSA tag drivers to be modular, from Andrew Lunn. 24) Remove legacy DSA probing support, also from Andrew Lunn. 25) Allow ll_temac driver to be used on non-x86 platforms, from Esben Haabendal. 26) Add a generic tracepoint for TX queue timeouts to ease debugging, from Cong Wang. 27) More indirect call optimizations, from Paolo Abeni" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits) cxgb4: Fix error path in cxgb4_init_module net: phy: improve pause mode reporting in phy_print_status dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings net: macb: Change interrupt and napi enable order in open net: ll_temac: Improve error message on error IRQ net/sched: remove block pointer from common offload structure net: ethernet: support of_get_mac_address new ERR_PTR error net: usb: smsc: fix warning reported by kbuild test robot staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check net: dsa: support of_get_mac_address new ERR_PTR error net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats vrf: sit mtu should not be updated when vrf netdev is the link net: dsa: Fix error cleanup path in dsa_init_module l2tp: Fix possible NULL pointer dereference taprio: add null check on sched_nest to avoid potential null pointer dereference net: mvpp2: cls: fix less than zero check on a u32 variable net_sched: sch_fq: handle non connected flows net_sched: sch_fq: do not assume EDT packets are ordered net: hns3: use devm_kcalloc when allocating desc_cb net: hns3: some cleanup for struct hns3_enet_ring ...
| * net: pass net_device argument to the eth_get_headlenStanislav Fomichev2019-04-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update all users of eth_get_headlen to pass network device, fetch network namespace from it and pass it down to the flow dissector. This commit is a noop until administrator inserts BPF flow dissector program. Cc: Maxim Krasnyansky <maxk@qti.qualcomm.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: intel-wired-lan@lists.osuosl.org Cc: Yisen Zhuang <yisen.zhuang@huawei.com> Cc: Salil Mehta <salil.mehta@huawei.com> Cc: Michael Chan <michael.chan@broadcom.com> Cc: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| * net: move skb->xmit_more hint to softnet dataFlorian Westphal2019-04-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are two reasons for this. First, the xmit_more flag conceptually doesn't fit into the skb, as xmit_more is not a property related to the skb. Its only a hint to the driver that the stack is about to transmit another packet immediately. Second, it was only done this way to not have to pass another argument to ndo_start_xmit(). We can place xmit_more in the softnet data, next to the device recursion. The recursion counter is already written to on each transmit. The "more" indicator is placed right next to it. Drivers can use the netdev_xmit_more() helper instead of skb->xmit_more to check the "more packets coming" hint. skb->xmit_more is retained (but always 0) to not cause build breakage. This change takes care of the simple s/skb->xmit_more/netdev_xmit_more()/ conversions. Remaining drivers are converted in the next patches. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: remove 'fallback' argument from dev->ndo_select_queue()Paolo Abeni2019-03-201-3/+2Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After the previous patch, all the callers of ndo_select_queue() provide as a 'fallback' argument netdev_pick_tx. The only exceptions are nested calls to ndo_select_queue(), which pass down the 'fallback' available in the current scope - still netdev_pick_tx. We can drop such argument and replace fallback() invocation with netdev_pick_tx(). This avoids an indirect call per xmit packet in some scenarios (TCP syn, UDP unconnected, XDP generic, pktgen) with device drivers implementing such ndo. It also clean the code a bit. Tested with ixgbe and CONFIG_FCOE=m With pktgen using queue xmit: threads vanilla patched (kpps) (kpps) 1 2334 2428 2 4166 4278 4 7895 8100 v1 -> v2: - rebased after helper's name change Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * intel: correct return from set features callbackSerhey Popovych2019-03-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | According to comments in <linux/netdevice.h> we should return either >0 or -errno from ->ndo_set_features() if changing dev->features by itself. Return 1 in such places to notify netdev_update_features() about applied changes in dev->features. Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | drivers: Remove explicit invocations of mmiowb()Will Deacon2019-04-081-5/+0Star
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | mmiowb() is now implied by spin_unlock() on architectures that require it, so there is no reason to call it from driver code. This patch was generated using coccinelle: @mmiowb@ @@ - mmiowb(); and invoked as: $ for d in drivers include/linux/qed sound; do \ spatch --include-headers --sp-file mmiowb.cocci --dir $d --in-place; done NOTE: mmiowb() has only ever guaranteed ordering in conjunction with spin_unlock(). However, pairing each mmiowb() removal in this patch with the corresponding call to spin_unlock() is not at all trivial, so there is a small chance that this change may regress any drivers incorrectly relying on mmiowb() to order MMIO writes between CPUs using lock-free synchronisation. If you've ended up bisecting to this commit, you can reintroduce the mmiowb() calls using wmb() instead, which should restore the old behaviour on all architectures other than some esoteric ia64 systems. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
* mm: replace all open encodings for NUMA_NO_NODEAnshuman Khandual2019-03-061-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch series "Replace all open encodings for NUMA_NO_NODE", v3. All these places for replacement were found by running the following grep patterns on the entire kernel code. Please let me know if this might have missed some instances. This might also have replaced some false positives. I will appreciate suggestions, inputs and review. 1. git grep "nid == -1" 2. git grep "node == -1" 3. git grep "nid = -1" 4. git grep "node = -1" This patch (of 2): At present there are multiple places where invalid node number is encoded as -1. Even though implicitly understood it is always better to have macros in there. Replace these open encodings for an invalid node number with the global macro NUMA_NO_NODE. This helps remove NUMA related assumptions like 'invalid node' from various places redirecting them to a common definition. Link: http://lkml.kernel.org/r/1545127933-10711-2-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> [ixgbe] Acked-by: Jens Axboe <axboe@kernel.dk> [mtip32xx] Acked-by: Vinod Koul <vkoul@kernel.org> [dmaengine.c] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Doug Ledford <dledford@redhat.com> [drivers/infiniband] Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2019-02-241-3/+16
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | Three conflicts, one of which, for marvell10g.c is non-trivial and requires some follow-up from Heiner or someone else. The issue is that Heiner converted the marvell10g driver over to use the generic c45 code as much as possible. However, in 'net' a bug fix appeared which makes sure that a new local mask (MDIO_AN_10GBT_CTRL_ADV_NBT_MASK) with value 0x01e0 is cleared. Signed-off-by: David S. Miller <davem@davemloft.net>
| * ixgbe: fix potential RX buffer starvation for AF_XDPMagnus Karlsson2019-02-211-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the RX rings are created they are also populated with buffers so that packets can be received. Usually these are kernel buffers, but for AF_XDP in zero-copy mode, these are user-space buffers and in this case the application might not have sent down any buffers to the driver at this point. And if no buffers are allocated at ring creation time, no packets can be received and no interrupts will be generated so the NAPI poll function that allocates buffers to the rings will never get executed. To rectify this, we kick the NAPI context of any queue with an attached AF_XDP zero-copy socket in two places in the code. Once after an XDP program has loaded and once after the umem is registered. This take care of both cases: XDP program gets loaded first then AF_XDP socket is created, and the reverse, AF_XDP socket is created first, then XDP program is loaded. Fixes: d0bcacd0a130 ("ixgbe: add AF_XDP zero-copy Rx support") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * ixgbe: fix older devices that do not support IXGBE_MRQC_L3L4TXSWENJeff Kirsher2019-02-211-2/+5
| | | | | | | | | | | | | | | | | | | | | | The enabling L3/L4 filtering for transmit switched packets for all devices caused unforeseen issue on older devices when trying to send UDP traffic in an ordered sequence. This bit was originally intended for X550 devices, which supported this feature, so limit the scope of this bit to only X550 devices. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
* | net: bpf: remove XDP_QUERY_XSK_UMEM enumeratorJan Sokolowski2019-02-151-3/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit c9b47cc1fabc ("xsk: fix bug when trying to use both copy and zero-copy on one queue id") moved the umem query code to the AF_XDP core, and therefore removed the need to query the netdevice for a umem. This patch removes XDP_QUERY_XSK_UMEM and all code that implement that behavior, which is just dead code. Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Acked-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* | net: Add extack argument to ndo_fdb_add()Petr Machata2019-01-181-1/+2
|/ | | | | | | | | | | | | Drivers may not be able to support certain FDB entries, and an error code is insufficient to give clear hints as to the reasons of rejection. In order to make it possible to communicate the rejection reason, extend ndo_fdb_add() with an extack argument. Adapt the existing implementations of ndo_fdb_add() to take the parameter (and ignore it). Pass the extack parameter when invoking ndo_fdb_add() from rtnl_fdb_add(). Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: use mii_bus to handle MII related ioctlsSteve Douthit2018-12-201-0/+18
| | | | | | | | | | | | | | | | Use the mii_bus callbacks to address the entire clause 22/45 address space. Enables userspace to poke switch registers instead of a single PHY address. The ixgbe firmware may be polling PHYs in a way that is not protected by the mii_bus lock. This isn't new behavior, but as Andrew Lunn pointed out there are more addresses available for conflicts. Signed-off-by: Stephen Douthit <stephend@silicom-usa.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: register a mdiobusSteve Douthit2018-12-201-0/+5
| | | | | | | | | | | | | | | Most dsa devices expect a 'struct mii_bus' pointer to talk to switches via the MII interface. While this works for dsa devices, it will not work safely with Linux PHYs in all configurations since the firmware of the ixgbe device may be polling some PHY addresses in the background. Signed-off-by: Stephen Douthit <stephend@silicom-usa.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* drivers: net: intel: use secpath helpers in more placesFlorian Westphal2018-12-191-2/+3
| | | | | | | | | | | Use skb_sec_path and secpath_exists helpers where possible. This reduces noise in followup patch that removes skb->sp pointer. v2: no changes, preseve acks from v1. Acked-by: Shannon Nelson <shannon.lee.nelson@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ndo_bridge_setlink: Add extackPetr Machata2018-12-131-1/+2
| | | | | | | | | | | | | | | | Drivers may not be able to implement a VLAN addition or reconfiguration. In those cases it's desirable to explain to the user that it was rejected (and why). To that end, add extack argument to ndo_bridge_setlink. Adapt all users to that change. Following patches will use the new argument in the bridge driver. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: Replace synchronize_sched() with synchronize_rcu()Paul E. McKenney2018-11-211-3/+3
| | | | | | | | | | Now that synchronize_rcu() waits for preempt-disable regions of code as well as RCU read-side critical sections, synchronize_sched() can be replaced by synchronize_rcu(). This commit therefore makes this change. Signed-off-by: "Paul E. McKenney" <paulmck@linux.ibm.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* intel-ethernet: software timestamp skbs as late as possibleJacob Keller2018-11-071-2/+2
| | | | | | | | | | | | | | | | | Many of the Intel Ethernet drivers call skb_tx_timestamp() earlier than necessary. Move the calls to this function to the latest point possible, just prior to notifying hardware of the new Tx packet when we bump the tail register. This affects i40e, iavf, igb, igc, and ixgbe. The e100, e1000, e1000e, fm10k, and ice drivers already call the skb_tx_timestamp() function just prior to indicating the Tx packet to hardware, so they do not need to be changed. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: don't clear_bit on xdp_ring->state if xdp_ring is nullColin Ian King2018-11-071-1/+2
| | | | | | | | | | | | | | There is an earlier check to see if xdp_ring is null when configuring the tx ring, so assuming that it can still be null, the clearing of the xdp_ring->state currently could end up with a null pointer dereference. Fix this by only clearing the bit if xdp_ring is not null. Detected by CoverityScan, CID#1473795 ("Dereference after null check") Fixes: 024aa5800f32 ("ixgbe: added Rx/Tx ring disable/enable functions") Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe/ixgbevf: fix XFRM_ALGO dependencyJeff Kirsher2018-10-311-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Based on the original work from Arnd Bergmann. When XFRM_ALGO is not enabled, the new ixgbe IPsec code produces a link error: drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.o: In function `ixgbe_ipsec_vf_add_sa': ixgbe_ipsec.c:(.text+0x1266): undefined reference to `xfrm_aead_get_byname' Simply selecting XFRM_ALGO from here causes circular dependencies, so to fix it, we probably want this slightly more complex solution that is similar to what other drivers with XFRM offload do: A separate Kconfig symbol now controls whether we include the IPsec offload code. To keep the old behavior, this is left as 'default y'. The dependency in XFRM_OFFLOAD still causes a circular dependency but is not actually needed because this symbol is not user visible, so removing that dependency on top makes it all work. CC: Arnd Bergmann <arnd@arndb.de> CC: Shannon Nelson <shannon.nelson@oracle.com> Fixes: eda0333ac293 ("ixgbe: add VF IPsec management") Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
* Merge tag 'pci-v4.20-changes' of ↵Linus Torvalds2018-10-251-10/+0Star
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - Fix ASPM link_state teardown on removal (Lukas Wunner) - Fix misleading _OSC ASPM message (Sinan Kaya) - Make _OSC optional for PCI (Sinan Kaya) - Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set (Patrick Talbert) - Remove x86 and arm64 node-local allocation for host bridge structures (Punit Agrawal) - Pay attention to device-specific _PXM node values (Jonathan Cameron) - Support new Immediate Readiness bit (Felipe Balbi) - Differentiate between pciehp surprise and safe removal (Lukas Wunner) - Remove unnecessary pciehp includes (Lukas Wunner) - Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner) - Tolerate PCIe Slot Presence Detect being hardwired to zero to workaround broken hardware, e.g., the Wilocity switch/wireless device (Lukas Wunner) - Unify pciehp controller & slot structs (Lukas Wunner) - Constify hotplug_slot_ops (Lukas Wunner) - Drop hotplug_slot_info (Lukas Wunner) - Embed hotplug_slot struct into users instead of allocating it separately (Lukas Wunner) - Initialize PCIe port service drivers directly instead of relying on initcall ordering (Keith Busch) - Restore PCI config state after a slot reset (Keith Busch) - Save/restore DPC config state along with other PCI config state (Keith Busch) - Reference count devices during AER handling to avoid race issue with concurrent hot removal (Keith Busch) - If an Upstream Port reports ERR_FATAL, don't try to read the Port's config space because it is probably unreachable (Keith Busch) - During error handling, use slot-specific reset instead of secondary bus reset to avoid link up/down issues on hotplug ports (Keith Busch) - Restore previous AER/DPC handling that does not remove and re-enumerate devices on ERR_FATAL (Keith Busch) - Notify all drivers that may be affected by error recovery resets (Keith Busch) - Always generate error recovery uevents, even if a driver doesn't have error callbacks (Keith Busch) - Make PCIe link active reporting detection generic (Keith Busch) - Support D3cold in PCIe hierarchies during system sleep and runtime, including hotplug and Thunderbolt ports (Mika Westerberg) - Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots are empty or occupied (Jon Derrick) - Remove duplicated include from pci/pcie/err.c and unused variable from cpqphp (YueHaibing) - Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza Pawandeep) - Uninline PCI bus accessors for better ftracing (Keith Busch) - Remove unused AER Root Port .error_resume method (Keith Busch) - Use kfifo in AER instead of a local version (Keith Busch) - Use threaded IRQ in AER bottom half (Keith Busch) - Use managed resources in AER core (Keith Busch) - Reuse pcie_port_find_device() for AER injection (Keith Busch) - Abstract AER interrupt handling to disconnect error injection (Keith Busch) - Refactor AER injection callbacks to simplify future improvments (Keith Busch) - Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski) - Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko) - Add switch fall-through annotations (Gustavo A. R. Silva) - Remove unused Switchtec quirk variable (Joshua Abraham) - Fix pci.c kernel-doc warning (Randy Dunlap) - Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig) - Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng) - Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid useless dmesg errors (Logan Gunthorpe) - Update Switchtec NTB documentation (Wesley Yung) - Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz) - Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang) - Add PCI support for peer-to-peer DMA (Logan Gunthorpe) - Add sysfs group for PCI peer-to-peer memory statistics (Logan Gunthorpe) - Add PCI peer-to-peer DMA scatterlist mapping interface (Logan Gunthorpe) - Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan Gunthorpe) - Add PCI peer-to-peer DMA driver writer's documentation (Logan Gunthorpe) - Add block layer flag to indicate driver support for PCI peer-to-peer DMA (Logan Gunthorpe) - Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P memory (Logan Gunthorpe) - Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan Gunthorpe) - Add nvme-pci support for PCI peer-to-peer memory in requests (Logan Gunthorpe) - Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise, Christoph Hellwig, Logan Gunthorpe) - Cache VF config space size to optimize enumeration of many VFs (KarimAllah Ahmed) - Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas) - Fix VMD AERSID quirk Device ID matching (Jon Derrick) - Fix Cadence PHY handling during probe (Alan Douglas) - Signal Cadence Endpoint interrupts via AXI region 0 instead of last region (Alan Douglas) - Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan Douglas) - Remove redundant controller tests for "device_type == pci" (Rob Herring) - Document R-Car E3 (R8A77990) bindings (Tho Vu) - Add device tree support for R-Car r8a7744 (Biju Das) - Drop unused mvebu PCIe capability code (Thomas Petazzoni) - Add shared PCI bridge emulation code (Thomas Petazzoni) - Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni) - Add aardvark Root Port emulation (Thomas Petazzoni) - Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach) - Add initial power management for i.MX7 (Leonard Crestez) - Add PME_Turn_Off support for i.MX7 (Leonard Crestez) - Fix qcom runtime power management error handling (Bjorn Andersson) - Update TI dra7xx unaligned access errata workaround for host mode as well as endpoint mode (Vignesh R) - Fix kirin section mismatch warning (Nathan Chancellor) - Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare) - Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I) - Update Keystone to use MRRS quirk for host bridge instead of open coding (Kishon Vijay Abraham I) - Refactor Keystone link establishment (Kishon Vijay Abraham I) - Simplify and speed up Keystone link training (Kishon Vijay Abraham I) - Remove unused Keystone host_init argument (Kishon Vijay Abraham I) - Merge Keystone driver files into one (Kishon Vijay Abraham I) - Remove redundant Keystone platform_set_drvdata() (Kishon Vijay Abraham I) - Rename Keystone functions for uniformity (Kishon Vijay Abraham I) - Add Keystone device control module DT binding (Kishon Vijay Abraham I) - Use SYSCON API to get Keystone control module device IDs (Kishon Vijay Abraham I) - Clean up Keystone PHY handling (Kishon Vijay Abraham I) - Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I) - Clean up Keystone config space access checks (Kishon Vijay Abraham I) - Get Keystone outbound window count from DT (Kishon Vijay Abraham I) - Clean up Keystone outbound window configuration (Kishon Vijay Abraham I) - Clean up Keystone DBI setup (Kishon Vijay Abraham I) - Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I) - Fix Keystone IRQ status checking (Kishon Vijay Abraham I) - Add debug messages for all Keystone errors (Kishon Vijay Abraham I) - Clean up Keystone includes and macros (Kishon Vijay Abraham I) - Fix Mediatek unchecked return value from devm_pci_remap_iospace() (Gustavo A. R. Silva) - Fix Mediatek endpoint/port matching logic (Honghui Zhang) - Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui Zhang) - Remove redundant Mediatek PM domain check (Honghui Zhang) - Convert Mediatek to pci_host_probe() (Honghui Zhang) - Fix Mediatek MSI enablement (Honghui Zhang) - Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang) - Add Mediatek loadable module support (Honghui Zhang) - Detach VMD resources after stopping root bus to prevent orphan resources (Jon Derrick) - Convert pcitest build process to that used by other tools (iio, perf, etc) (Gustavo Pimentel) * tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI/AER: Refactor error injection fallbacks PCI/AER: Abstract AER interrupt handling PCI/AER: Reuse existing pcie_port_find_device() interface PCI/AER: Use managed resource allocations PCI: pcie: Remove redundant 'default n' from Kconfig PCI: aardvark: Implement emulated root PCI bridge config space PCI: mvebu: Convert to PCI emulated bridge config space PCI: mvebu: Drop unused PCI express capability code PCI: Introduce PCI bridge emulated config space common logic PCI: vmd: Detach resources after stopping root bus nvmet: Optionally use PCI P2P memory nvmet: Introduce helper functions to allocate and free request SGLs nvme-pci: Add support for P2P memory in requests nvme-pci: Use PCI p2pmem subsystem to manage the CMB IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]() block: Add PCI P2P flag for request queue PCI/P2PDMA: Add P2P DMA driver writer's documentation docs-rst: Add a new directory for PCI documentation PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset ...
| * PCI/AER: Remove pci_cleanup_aer_uncorrect_error_status() callsOza Pawandeep2018-10-021-10/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | After bfcb79fca19d ("PCI/ERR: Run error recovery callbacks for all affected devices"), AER errors are always cleared by the PCI core and drivers don't need to do it themselves. Remove calls to pci_cleanup_aer_uncorrect_error_status() from device driver error recovery functions. Signed-off-by: Oza Pawandeep <poza@codeaurora.org> [bhelgaas: changelog, remove PCI core changes, remove unused variables] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2018-10-041-5/+7
|\ \ | | | | | | | | | | | | | | | | | | Minor conflict in net/core/rtnetlink.c, David Ahern's bug fix in 'net' overlapped the renaming of a netlink attribute in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ixgbe: check return value of napi_complete_done()Song Liu2018-10-031-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The NIC driver should only enable interrupts when napi_complete_done() returns true. This patch adds the check for ixgbe. Cc: stable@vger.kernel.org # 4.10+ Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Song Liu <songliubraving@fb.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | ixgbe: add AF_XDP zero-copy Tx supportBjörn Töpel2018-10-031-1/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds zero-copy Tx support for AF_XDP sockets. It implements the ndo_xsk_async_xmit netdev ndo and performs all the Tx logic from a NAPI context. This means pulling egress packets from the Tx ring, placing the frames on the NIC HW descriptor ring and completing sent frames back to the application via the completion ring. The regular XDP Tx ring is used for AF_XDP as well. This rationale for this is as follows: XDP_REDIRECT guarantees mutual exclusion between different NAPI contexts based on CPU id. In other words, a netdev can XDP_REDIRECT to another netdev with a different NAPI context, since the operation is bound to a specific core and each core has its own hardware ring. As the AF_XDP Tx action is running in the same NAPI context and using the same ring, it will also be protected from XDP_REDIRECT actions with the exact same mechanism. As with AF_XDP Rx, all AF_XDP Tx specific functions are added to ixgbe_xsk.c. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: William Tu <u9012063@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | | ixgbe: move common Tx functions to ixgbe_txrx_common.hBjörn Töpel2018-10-031-6/+3Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch prepares for the upcoming zero-copy Tx functionality by moving common functions used both by the regular path and zero-copy path. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: William Tu <u9012063@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | | ixgbe: add AF_XDP zero-copy Rx supportBjörn Töpel2018-10-031-12/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds zero-copy Rx support for AF_XDP sockets. Instead of allocating buffers of type MEM_TYPE_PAGE_SHARED, the Rx frames are allocated as MEM_TYPE_ZERO_COPY when AF_XDP is enabled for a certain queue. All AF_XDP specific functions are added to a new file, ixgbe_xsk.c. Note that when AF_XDP zero-copy is enabled, the XDP action XDP_PASS will allocate a new buffer and copy the zero-copy frame prior passing it to the kernel stack. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: William Tu <u9012063@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | | ixgbe: move common Rx functions to ixgbe_txrx_common.hBjörn Töpel2018-10-031-18/+11Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch prepares for the upcoming zero-copy Rx functionality, by moving/changing linkage of common functions, used both by the regular path and zero-copy path. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: William Tu <u9012063@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | | ixgbe: added Rx/Tx ring disable/enable functionsBjörn Töpel2018-10-031-0/+158
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add functions for Rx/Tx ring enable/disable. Instead of resetting the whole device, only the affected ring is disabled or enabled. This plumbing is used in later commits, when zero-copy AF_XDP support is introduced. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: William Tu <u9012063@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | | ixgbe: Fix crash with VFs and flow director on interface flapRadoslaw Tyl2018-10-031-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fix crash when we have restore flow director filters after reset adapter. In ixgbe_fdir_filter_restore() filter->action is outside of the rx_ring array, as it has a VF identifier in the upper 32 bits. Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | | ixgbe: Fix ixgbe TX hangs with XDP_TX beyond queue limitRadoslaw Tyl2018-10-031-4/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | We have Tx hang when number Tx and XDP queues are more than 64. In XDP always is MTQC == 0x0 (64TxQs). We need more space for Tx queues. Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | | Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller2018-09-251-25/+0Star
|\| | | | | | | | | | | | | | | | | | | | | | | | | | Version bump conflict in batman-adv, take what's in net-next. iavf conflict, adjustment of netdev_ops in net-next conflicting with poll controller method removal in net. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ixgbe: remove ndo_poll_controllerEric Dumazet2018-09-241-25/+0Star
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. ixgbe uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Reported-by: Song Liu <songliubraving@fb.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Song Liu <songliubraving@fb.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | intel-ethernet: use correct module licenseJesse Brandeburg2018-09-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | We recently updated all our SPDX identifiers to correctly indicate our net/ethernet/intel/* drivers were always released and intended to be released under GPL v2, but the MODULE_LICENSE declaration was never updated. Fix the MODULE_LICENSE to be GPL v2, for all our drivers. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | ixgbe: firmware recovery modeSebastian Basierski2018-08-281-0/+41
|/ | | | | | | | | Add check for FW NVM recovery mode during driver initialization and service task. If in recovery mode, log message and unregister device Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com> Tested-by: Don Buchholz <donald.buchholz@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Prevent unsupported configurations with XDPTony Nguyen2018-08-241-2/+26
| | | | | | | | | | | | | | | | | | | These changes address comments by Jakub Kicinski on commit 38b7e7f8ae82 ("ixgbe: Do not allow LRO or MTU change with XDP"). Change the MTU check with XDP to allow any supported value and only reject those outside of the range as opposed to rejecting any change when XDP is active. In situations where MTU size is not supported, return -EINVAL instead of -EPERM. Add checks when enabling SRIOV, DCB, or adding L2FW offloaded device as they are not supported with XDP. CC: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Replace GFP_ATOMIC with GFP_KERNELJia-Ju Bai2018-08-241-1/+1
| | | | | | | | | | | | | | ixgbe_fcoe_ddp_setup(), ixgbe_setup_fcoe_ddp_resources() and ixgbe_sw_init() are never called in atomic context. They call kmalloc(), dma_pool_alloc() and kzalloc() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC can be replaced with GFP_KERNEL. This is found by a static analysis tool named DCNS written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Acked-by: Sebastian Basierski <sebastianx.basierski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* net_sched: remove list_head from tc_actionCong Wang2018-08-211-4/+2Star
| | | | | | | | | | | | After commit 90b73b77d08e, list_head is no longer needed. Now we just need to convert the list iteration to array iteration for drivers. Fixes: 90b73b77d08e ("net: sched: change action API to use array of pointers to actions") Cc: Jiri Pirko <jiri@mellanox.com> Cc: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: Refactor queue disable logic to take completion time into accountAlexander Duyck2018-07-261-65/+215
| | | | | | | | | | | | | | This change is meant to allow us to take completion time into account when disabling queues. Previously we were just working with hard coded values for how long we should wait. This worked fine for the standard case where completion timeout was operating in the 50us to 50ms range, however on platforms that have higher completion timeout times this was resulting in Rx queues disable messages being displayed as we weren't waiting long enough for outstanding Rx DMA completions. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Don Buchholz <donald.buchholz@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Reorder Tx/Rx shutdown to reduce time needed to stop deviceAlexander Duyck2018-07-261-7/+7
| | | | | | | | | | | | | | | | | | This change is meant to help reduce the time needed to shutdown the transmit and receive paths for the device. Specifically what we now do after this patch is disable the transmit path first at the netdev level, and then work on disabling the Rx. This way while we are waiting on the Rx queues to be disabled the Tx queues have an opportunity to drain out. In addition I have dropped the 10ms timeout that was left in the ixgbe_down function that seems to have been carried through from back in e1000 as far as I can tell. We shouldn't need it since we don't actually disable the Tx until much later and we have additional logic in place for verifying the Tx queues have been disabled. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Don Buchholz <donald.buchholz@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Do not allow LRO or MTU change with XDPTony Nguyen2018-07-261-0/+10
| | | | | | | | | | | | XDP does not support jumbo frames or LRO. These checks are being made outside the driver when an XDP program is loaded, however, there is nothing preventing these from changing after an XDP program is loaded. Add the checks so that while an XDP program is loaded, do not allow MTU to be changed or LRO to be enabled. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller2018-07-151-1/+0Star
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Daniel Borkmann says: ==================== pull-request: bpf-next 2018-07-15 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Various different arm32 JIT improvements in order to optimize code emission and make the JIT code itself more robust, from Russell. 2) Support simultaneous driver and offloaded XDP in order to allow for advanced use-cases where some work is offloaded to the NIC and some to the host. Also add ability for bpftool to load programs and maps beyond just the cgroup case, from Jakub. 3) Add BPF JIT support in nfp for multiplication as well as division. For the latter in particular, it uses the reciprocal algorithm to emulate it, from Jiong. 4) Add BTF pretty print functionality to bpftool in plain and JSON output format, from Okash. 5) Add build and installation to the BPF helper man page into bpftool, from Quentin. 6) Add a TCP BPF callback for listening sockets which is triggered right after the socket transitions to TCP_LISTEN state, from Andrey. 7) Add a new cgroup tree command to bpftool which iterates over the whole cgroup tree and prints all attached programs, from Roman. 8) Improve xdp_redirect_cpu sample to support parsing of double VLAN tagged packets, from Jesper. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * xdp: don't make drivers report attachment modeJakub Kicinski2018-07-131-1/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | prog_attached of struct netdev_bpf should have been superseded by simply setting prog_id long time ago, but we kept it around to allow offloading drivers to communicate attachment mode (drv vs hw). Subsequently drivers were also allowed to report back attachment flags (prog_flags), and since nowadays only programs attached will XDP_FLAGS_HW_MODE can get offloaded, we can tell the attachment mode from the flags driver reports. Remove prog_attached member. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* | net: allow fallback function to pass netdevAlexander Duyck2018-07-091-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For most of these calls we can just pass NULL through to the fallback function as the sb_dev. The only cases where we cannot are the cases where we might be dealing with either an upper device or a driver that would have configured things to support an sb_dev itself. The only driver that has any significant change in this patch set should be ixgbe as we can drop the redundant functionality that existed in both the ndo_select_queue function and the fallback function that was passed through to us. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | net: allow ndo_select_queue to pass netdevAlexander Duyck2018-07-091-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | This patch makes it so that instead of passing a void pointer as the accel_priv we instead pass a net_device pointer as sb_dev. Making this change allows us to pass the subordinate device through to the fallback function eventually so that we can keep the actual code in the ndo_select_queue call as focused on possible on the exception cases. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | net: Add support for subordinate traffic classes to netdev_pick_txAlexander Duyck2018-07-091-13/+6Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change makes it so that we can support the concept of subordinate device traffic classes to the core networking code. In doing this we can start pulling out the driver specific bits needed to support selecting a queue based on an upper device. The solution at is currently stands is only partially implemented. I have the start of some XPS bits in here, but I would still need to allow for configuration of the XPS maps on the queues reserved for the subordinate devices. For now I am using the reference to the sb_dev XPS map as just a way to skip the lookup of the lower device XPS map for now as that would result in the wrong queue being picked. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-05-20 17:04:32 +0200