summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial
Commit message (Collapse)AuthorAgeFilesLines
* serial: 8250: add uart_config entry for PORT_RT2880Mans Rullgard2015-10-041-0/+8
| | | | | | | | | | | This adds an entry to the uart_config table for PORT_RT2880 enabling rx/tx FIFOs. The UART is actually a Palmchip BK-3103 which is found in several devices from Alchemy/RMI, Ralink, and Sigma Designs. Signed-off-by: Mans Rullgard <mans@mansr.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: atmel: fix error path of probe functionUwe Kleine-König2015-10-041-1/+1
| | | | | | | | | | | | | | | | If atmel_init_gpios fails the port has already been marked as busy (in line 2629), so this must be undone in the error path. This bug was introduced because I created the patch that finally became 722ccf416ac2 ("serial: atmel: fix error handling when mctrl_gpio_init fails") on top of 3.19 which didn't have commit 6fbb9bdf0f3f ("tty/serial: at91: fix error handling in atmel_serial_probe()") yet. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 722ccf416ac2 ("serial: atmel: fix error handling when mctrl_gpio_init fails") Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Revert "serial: imx: remove unbalanced clk_prepare"Fabio Estevam2015-10-041-6/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 9e7b399d6528eac33a6fbfceb2b92af209c3454d. Commit ("9e7b399d6528ea") causes the following warning and sometimes also hangs the system: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/locking/mutex.c:868 mutex_trylock+0x20c/0x22c() DEBUG_LOCKS_WARN_ON(in_interrupt()) Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.2.0-rc7-next-20150818-00001-g14418a6 #4 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Backtrace: [<80012f08>] (dump_backtrace) from [<800130a4>] (show_stack+0x18/0x1c) r6:00000364 r5:00000000 r4:00000000 r3:00000000 [<8001308c>] (show_stack) from [<807902b8>] (dump_stack+0x88/0xa4) [<80790230>] (dump_stack) from [<8002a604>] (warn_slowpath_common+0x80/0xbc) r5:807945c4 r4:80ab3b50 [<8002a584>] (warn_slowpath_common) from [<8002a6e4>] (warn_slowpath_fmt+0x38/0x40) r8:00000000 r7:8131100c r6:8054c3cc r5:8131300c r4:80b0a570 [<8002a6b0>] (warn_slowpath_fmt) from [<807945c4>] (mutex_trylock+0x20c/0x22c) r3:8095d0d8 r2:8095ab28 [<807943b8>] (mutex_trylock) from [<8054c3cc>] (clk_prepare_lock+0x14/0xf4) r7:8131100c r6:be3f0c80 r5:00000037 r4:be3f0c80 [<8054c3b8>] (clk_prepare_lock) from [<8054dbfc>] (clk_prepare+0x18/0x30) r5:00000037 r4:be3f0c80 [<8054dbe4>] (clk_prepare) from [<8036a600>] (imx_console_write+0x30/0x244) r4:812d0bc8 r3:8132b9a4 To reproduce the problem we only need to let the board idle for something like 30 seconds. Tested on a imx6q-sabresd. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tty: serial: Add missing module license for 8250_base.koJonathan McDowell2015-09-221-0/+2
| | | | | | | | | | | | The split of the 8250 driver into a 8250_base/8250.ko resulted in a lack of a license for the 8250_base.ko module. This caused the module to fail to load and the kernel to be tainted. Add the appropriate MODULE_LICENSE to 8250_port.c, which is always compiled into 8250_base.ko Signed-off-by: Jonathan McDowell <noodles@earth.li> Reported-by: Mikael Pettersson <mikpelinux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'tty-4.3-rc1' of ↵Linus Torvalds2015-09-092-382/+125Star
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty driver reverts from Greg KH: "Here are some reverts for some tty patches (specifically the pl011 driver) that ended up breaking a bunch of machines (i.e. almost all of the ones with this chip). People are working on a fix for this, but in the meantime, it's best to just revert all 5 patches to restore people's serial consoles. These reverts have been in linux-next for many days now" * tag 'tty-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "uart: pl011: Rename regs with enumeration" Revert "uart: pl011: Introduce register accessor" Revert "uart: pl011: Introduce register look up table" Revert "uart: pl011: Improve LCRH register access decision" Revert "uart: pl011: Add support to ZTE ZX296702 uart"
| * Revert "uart: pl011: Rename regs with enumeration"Greg Kroah-Hartman2015-09-041-114/+93Star
| | | | | | | | | | | | | | | | | | | | | | This reverts commit 534e14e2293d8cd714b94513686228453b21fae2 as with this patch the serial console is broken on lots of platforms. Reported-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jun Nie <jun.nie@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Tested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * Revert "uart: pl011: Introduce register accessor"Greg Kroah-Hartman2015-09-041-141/+122Star
| | | | | | | | | | | | | | | | | | | | | | This reverts commit 7b753f318d1456c8e7740f3bd96d1dbb362d5449 as with this patch the serial console is broken on lots of platforms. Reported-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jun Nie <jun.nie@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Tested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * Revert "uart: pl011: Introduce register look up table"Greg Kroah-Hartman2015-09-041-50/+5Star
| | | | | | | | | | | | | | | | | | | | | | This reverts commit 2c096a9eedc6841d3610545f4e6c3d72bd0962be as with this patch the serial console is broken on lots of platforms. Reported-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jun Nie <jun.nie@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Tested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * Revert "uart: pl011: Improve LCRH register access decision"Greg Kroah-Hartman2015-09-041-7/+2Star
| | | | | | | | | | | | | | | | | | | | | | This reverts commit 09dcc7dfc05b31bf0bbcd1511cd1a2644908d5c8 as with this patch the serial console is broken on lots of platforms. Reported-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jun Nie <jun.nie@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Tested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * Revert "uart: pl011: Add support to ZTE ZX296702 uart"Greg Kroah-Hartman2015-09-042-183/+16Star
| | | | | | | | | | | | | | | | | | | | | | This reverts commit 8cd90e50d1408c65c355084b1c7f8f9085f49c6b as with this patch the serial console is broken on lots of platforms. Reported-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jun Nie <jun.nie@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Tested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge tag 'libnvdimm-for-4.3' of ↵Linus Torvalds2015-09-081-1/+1
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "This update has successfully completed a 0day-kbuild run and has appeared in a linux-next release. The changes outside of the typical drivers/nvdimm/ and drivers/acpi/nfit.[ch] paths are related to the removal of IORESOURCE_CACHEABLE, the introduction of memremap(), and the introduction of ZONE_DEVICE + devm_memremap_pages(). Summary: - Introduce ZONE_DEVICE and devm_memremap_pages() as a generic mechanism for adding device-driver-discovered memory regions to the kernel's direct map. This facility is used by the pmem driver to enable pfn_to_page() operations on the page frames returned by DAX ('direct_access' in 'struct block_device_operations'). For now, the 'memmap' allocation for these "device" pages comes from "System RAM". Support for allocating the memmap from device memory will arrive in a later kernel. - Introduce memremap() to replace usages of ioremap_cache() and ioremap_wt(). memremap() drops the __iomem annotation for these mappings to memory that do not have i/o side effects. The replacement of ioremap_cache() with memremap() is limited to the pmem driver to ease merging the api change in v4.3. Completion of the conversion is targeted for v4.4. - Similar to the usage of memcpy_to_pmem() + wmb_pmem() in the pmem driver, update the VFS DAX implementation and PMEM api to provide persistence guarantees for kernel operations on a DAX mapping. - Convert the ACPI NFIT 'BLK' driver to map the block apertures as cacheable to improve performance. - Miscellaneous updates and fixes to libnvdimm including support for issuing "address range scrub" commands, clarifying the optimal 'sector size' of pmem devices, a clarification of the usage of the ACPI '_STA' (status) property for DIMM devices, and other minor fixes" * tag 'libnvdimm-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (34 commits) libnvdimm, pmem: direct map legacy pmem by default libnvdimm, pmem: 'struct page' for pmem libnvdimm, pfn: 'struct page' provider infrastructure x86, pmem: clarify that ARCH_HAS_PMEM_API implies PMEM mapped WB add devm_memremap_pages mm: ZONE_DEVICE for "device memory" mm: move __phys_to_pfn and __pfn_to_phys to asm/generic/memory_model.h dax: drop size parameter to ->direct_access() nd_blk: change aperture mapping from WC to WB nvdimm: change to use generic kvfree() pmem, dax: have direct_access use __pmem annotation dax: update I/O path to do proper PMEM flushing pmem: add copy_from_iter_pmem() and clear_pmem() pmem, x86: clean up conditional pmem includes pmem: remove layer when calling arch_has_wmb_pmem() pmem, x86: move x86 PMEM API to new pmem.h header libnvdimm, e820: make CONFIG_X86_PMEM_LEGACY a tristate option pmem: switch to devm_ allocations devres: add devm_memremap libnvdimm, btt: write and validate parent_uuid ...
| * arch, drivers: don't include <asm/io.h> directly, use <linux/io.h> insteadDan Williams2015-08-111-1/+1
| | | | | | | | | | | | | | | | Preparation for uniform definition of ioremap, ioremap_wc, ioremap_wt, and ioremap_cache, tree-wide. Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* | serial: imx: save and restore context in the suspend pathEduardo Valentin2015-08-151-21/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change teaches the imx serial driver to save its context and restore it across suspend and resume path. To do so, it introduces serial_imx_restore_context() and serial_imx_save_context() functions. They use a shadow set of registers to save key registers and restore them accordingly. These functions can be reused on other situations, when the device context is lost. Cc: Fabio Estevam <festevam@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-serial@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: imx: allow waking up on RTSDEduardo Valentin2015-08-151-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch sets RTSDEN bit when going into idle (Stop mode). We add the RTSDEN for the case RTS is sent from the remote connection. This way we allow the system to wakeup when RTS is received. Cc: Fabio Stevam <festevam@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-serial@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: imx: introduce serial_imx_enable_wakeup()Eduardo Valentin2015-08-151-8/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change is a code reorganization. Here we introduce serial_imx_enable_wakeup() helper function to do the job of configuring and preparing wakeup sources on imx serial device. The idea is to allow other parts of the code to call this function whenever the device is known to go to idle. Cc: Fabio Estevam <festevam@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-serial@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: imx: remove unbalanced clk_prepareEduardo Valentin2015-08-151-14/+6Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current code attempts to prepare clk_per and clk_ipg before using the device. However, the result is an extra prepare call on each clock. Here is the output of uart clocks (only uart enabled and used as console): $ grep uart /sys/kernel/debug/clk/clk_summary uart_serial 1 2 80000000 0 0 uart 1 2 66000000 0 0 This patch balances the calls of prepares. The result is: $ grep uart /sys/kernel/debug/clk/clk_summary uart_serial 1 1 80000000 0 0 uart 1 1 66000000 0 0 Cc: Fabio Estevam <festevam@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-serial@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: 8250: move rx_running out of the bitfieldJohn Ogness2015-08-151-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | That bitfield is modified by read + or + write operation. If someone sets any of the other two bits it might render the lock useless. While at it, remove other bitfields as well to avoid more such errors. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | tty: serial: 8250_omap: do not use RX DMA if pause is not supportedSebastian Andrzej Siewior2015-08-151-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The 8250-omap driver requires the DMA-engine driver to support the pause command in order to properly turn off programmed RX transfer before the driver stars manually reading from the FIFO. The lacking support of the requirement has been discovered recently. In order to stay safe here we disable RX-DMA completly on probe. The rx_dma_broken assignment on probe could be removed once we working pause function in omap-dma. Cc: <stable@vger.kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial:8250_dw: do not alter CTS and DCTS since AFE is enabledQipeng Zha2015-08-151-22/+0Star
| | | | | | | | | | | | | | | | | | | | | | Since the serial core is informed that this device is doing automatic flow control, it is not necessary to alter CTS and DCTS of the MSR as the core no longer attempts stop the port in uart_handle_cts_change(). Signed-off-by: Huiquan Zhong <huiquan.zhong@intel.com> Signed-off-by: Qipeng Zha <qipeng.zha@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | tty: serial: men_z135_uart.c: Don't initialize port->lockJohannes Thumshirn2015-08-151-1/+0Star
| | | | | | | | | | | | | | | | | | port->lock get's initialized in uart_add_one_port(), no need to do it in men_z135_probe(). Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | tty: serial: men_z135_uart.c: Fix race between IRQ and set_termios()Johannes Thumshirn2015-08-151-5/+4Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix panic caused by a race between men_z135_intr() and men_z135_set_termios(). men_z135_intr() and men_z135_set_termios() both hold the struct uart_port::lock spinlock, but men_z135_intr() does a spin_lock_irqsave() and men_z135_set_termios() does a normal spin_lock(), which can lead to a deadlock when an interrupt is called while the lock is being helt by men_z135_set_termios(). This was discovered using a insmod, hardware looppback send/receive, rmmod stress test. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Cc: Andreas Werner <andreas.werner@men.de> Cc: stable@vger.kernel.org # v4.0+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: 8250: bind to ALi Fast Infrared Controller (ALI5123)Maciej S. Szmigiero2015-08-151-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This way this device can be used with irtty-sir - at least on Toshiba Satellite A20-S103 it is not configured by default and needs PNP activation before it starts to respond on I/O ports. This device has actually its own driver (ali-ircc), but this driver seems to be non-functional for a very long time (see http://permalink.gmane.org/gmane.linux.irda.general/484 http://permalink.gmane.org/gmane.network.protocols.obex.openobex.user/943 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=535070 ). Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: 8250: don't bind to SMSC IrCC IR portMaciej S. Szmigiero2015-08-151-0/+5
| | | | | | | | | | | | | | | | | | | | SMSC IrCC SIR/FIR port should not be bound to by (legacy) serial driver so its own driver (smsc-ircc2) can bind to it. Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: mxs-auart: fix baud rate rangeStefan Wahren2015-08-151-2/+6
| | | | | | | | | | | | | | | | | | | | | | Currently mxs-auart doesn't care correctly about the baud rate divisor. According to reference manual the baud rate divisor must be between 0x000000EC and 0x003FFFC0. So calculate the possible baud rate range and use it for uart_get_baud_rate(). Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: mxs-auart: keep the AUART unit in reset state when not in useJuergen Borleis2015-08-151-7/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Whenever the UART device driver gets closed from userland, the driver disables the UART unit and then stops the clocks to save power. The bit which disabled the UART unit is described as:  "UART Enable. If this bit is set to 1, the UART is enabled. Data transmission and reception occurs for the UART signals. When the UART is disabled in the middle of transmission or reception, it completes the current character before stopping." The important part is the "it completes the current character". Whenever a reception is ongoing when the UART gets disabled (including the clock off) the statemachine freezes and "remembers" this state on the next open() when re-enabling the unit's clock. In this case we end up receiving an additional bogus character immediately. The solution in this change is to switch the AUART unit into its reset state on close() and only release it from its reset state on the next open(). Note: when the unit is also used as system console it is always 'in use', so we cannot reset it on close(). Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: mxs-auart: use a function name to reflect what it really doesJuergen Borleis2015-08-151-2/+2
| | | | | | | | | | | | | | | | | | This function clears the reset the AUART unit is in after system start to make it work. Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: 8250_pci: fix mode after S3/S4 resume for F81504/508/512Peter Hung2015-08-051-4/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix RS232/485 mode incorrect setting after S3/S4 resume for F81504/508/512 We had add RS232/485 RTS control with fecf27a373f5. But when it resume from S3/S4, the mode register 0x40 + 0x08 * idx + 7 will rewrite to 0x01 (RS232 mode). This patch will modify 2 sections. One is pci_fintek_init(), if it called when first init, it will write mode register with 0x01. If it called from S3/S4 resume, it's will get the relative port data and pass it to pci_fintek_rs485_config() with NULL rs485 parameter. The another modification is in pci_fintek_rs485_config(). It'll re-apply old configuration when the parameter rs485 is NULL. Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | sc16is7xx: constify devtypeJakub Kicinski2015-08-051-4/+4
| | | | | | | | | | | | | | | | | | devtype structures are all declared as const. Compiler does not complain because we cast their pointers to save them in .driver_data. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | sc16is7xx: support multiple devicesJakub Kicinski2015-08-051-24/+49
| | | | | | | | | | | | | | | | | | | | | | We currently register the uart driver during device probe which makes it hard to support more than one chip. Move the driver registration to module init/exit time and preallocate space for up to 8 lines (4-8 chips). Reported-by: Michael Allwright <michael.allwright@upb.de> Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | sc16is7xx: save and use per-chip line numberJakub Kicinski2015-08-051-10/+21
| | | | | | | | | | | | | | | | | | | | In preparation of supporting multiple devices we should save the per-chip line number (0 or 1), because the uart_port line will reflect system-wide uart number and will be offseted for chips other than the first to register. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | uart: pl011: Add support to ZTE ZX296702 uartJun Nie2015-08-052-16/+183
| | | | | | | | | | | | | | | | | | Support ZTE uart with some registers differing offset. Probe as platform device for not AMBA IP ID is available on ZTE uart. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | uart: pl011: Improve LCRH register access decisionJun Nie2015-08-051-2/+7
| | | | | | | | | | | | | | | | | | Improve LCRH register access decision as ARM PL011 lcrh register serve as both TX and RX, while other SOC may implement TX and RX function with separated register. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | uart: pl011: Introduce register look up tableJun Nie2015-08-051-5/+50
| | | | | | | | | | | | | | | | | | Introduce register look up table as different SOC venders may have different register offset for the some register. Signed-off-by: Jun Nie <jun.nie@linaro.org> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | uart: pl011: Introduce register accessorJun Nie2015-08-051-122/+141
| | | | | | | | | | | | | | | | | | Introduce register accessor to ease loop up table access in later patch. Signed-off-by: Jun Nie <jun.nie@linaro.org> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | uart: pl011: Rename regs with enumerationJun Nie2015-08-051-93/+114
| | | | | | | | | | | | | | | | | | Rename regs with enumeration to generalize register names. Signed-off-by: Jun Nie <jun.nie@linaro.org> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: 8250_pci: Add support for Pericom PI7C9X795[1248]Adam Lee2015-08-051-21/+61
| | | | | | | | | | | | | | | | | | Pericom PI7C9X795[1248] are Uno/Dual/Quad/Octal UART devices, this patch enables them, also defines PCI_VENDOR_ID_PERICOM here. Signed-off-by: Adam Lee <adam.lee@canonical.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: samsung: fix DMA for FIFO smaller than cache line sizeRobert Baldyga2015-08-051-15/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So far DMA mode were activated when only number of bytes to send was equal or greater than min_dma_size. Due to requirement that DMA transaction buffer should be aligned to cache line size, the excessive bytes were written to FIFO before starting DMA transaction. The problem occurred when FIFO size were smaller than cache alignment, because writing all excessive bytes to FIFO would fail. It happened in DMA mode when PIO interrupts disabled, which caused driver hung. The solution is to test if buffer is alligned to cache line size before activating DMA mode, and if it's not, running PIO mode to align buffer and then starting DMA transaction. In PIO mode, when interrupts are enabled, lack of space in FIFO isn't the problem, so buffer aligning will always finish with success. Cc: <stable@vger.kernel.org> # v3.18+ Reported-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: samsung: fix DMA mode enter condition for small FIFO sizesMarek Szyprowski2015-08-052-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to some of serial ports can have FIFO size smaller than cache line size, and because of need to align DMA buffer address to cache line size, it's necessary to calculate minimum number of bytes for which we want to start DMA transaction to be at least cache line size. The simplest way to meet this requirement is to get maximum of cache line size and FIFO size. Cc: <stable@vger.kernel.org> # v3.18+ Reported-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: core: Remove tty port activate() and shutdown() methodsPeter Hurley2015-08-051-7/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | serial core does not use tty_port_open() or tty_port_close(); serial core defines and extends it's own tty open() and close() methods (uart_open() and uart_close(), respectively). Remove the tty_port activate() and shutdown() initializations, and the uart_port_activate() function, which is never called. NB: uart_port_shutdown() is used by uart_close() => uart_shutdown() call chain (but not via the tty_port methods). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: core: Use proper spinlock flavor in uart_close()Peter Hurley2015-08-051-10/+8Star
| | | | | | | | | | | | | | | | | | uart_close() runs in non-atomic context only; use spin_lock/unlock_irq instead of saving the interrupt state (which == on). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | tty/serial: at91: fix I/O accesses on RHR and THR for AVR32Cyrille Pitchen2015-08-051-10/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes I/O accesses on the Receiver Holding Register and on the Transmitter Holding Register. Indeed AVR32 can only perform 32bit I/O accesses on registers: using 8bit I/O accesses would read or write garbage data. Fixes: commit b5199d468177 ("tty/serial: at91: add support to FIFOs") Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: Allow compile test of GPIO consumers if !GPIOLIBGeert Uytterhoeven2015-08-051-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: 8250: Auto CTS control by HW if AFE enabledQipeng Zha2015-08-052-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to DesignWare 8250 spec, if auto flow control mode is enabled, a change in CTS does not cause an interrupt, so sw-assisted CTS flow control mode will not work properly. There reported an GPS firmware download failure issue, and we verified the root cause is, the default sw-assisted CTS flow control mode can not work properly since no interrupt when got CTS signal. This patch is to enable auto CTS mode by defaut if CRTSCTS is enable for DesignWare 8250 controller. Signed-off-by: Huiquan Zhong <huiquan.zhong@intel.com> Signed-off-by: Qipeng Zha <qipeng.zha@intel.com> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: mpc52xx: let tx_empty callback return either 0 or TIOCSER_TEMTUwe Kleine-König2015-08-051-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | Documenation/serial/driver requests that the tx_empty callback should return 0 if there are still chars in the fifo or shifter or TIOCSER_TEMT (0x01) if no character is pending to be sent. Fix the mpc52xx serial driver to not return MPC52xx_PSC_SR_TXEMP (i.e. 0x0800) but TIOCSER_TEMT as documented. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: etraxfs-uart: use mctrl_gpio helpers for handling modem signalsNiklas Cassel2015-08-052-30/+11Star
| | | | | | | | | | | | | | | | | | | | | | | | In order to use the mctrl_gpio helpers, we change the DT bindings: ri-gpios renamed to rng-gpios. cd-gpios renamed to dcd-gpios. However, no in-tree dts/dtsi specifies these, so no worries. Signed-off-by: Niklas Cassel <nks@flawful.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: etraxfs-uart: remove empty functionsNiklas Cassel2015-08-051-10/+0Star
| | | | | | | | | | | | | | | | | | | | Implementing enable_ms is optional by serial_core. check_modem_status is just an empty local function. Signed-off-by: Niklas Cassel <nks@flawful.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Serial: imx: add dev_pm_ops to support suspend to ram/diskShenwei Wang2015-08-041-32/+94
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When system goes into low power states like SUSPEND_MEM and HIBERNATION, the hardware IP block may be powered off to reduce the power consumption. This power down may cause problems on some imx platforms, because the hardware settings are reset to its power on default values which may differ from the ones when it power off. This patch added the dev_pm_ops and implemented two callbacks: suspend_noirq and resume_noirq, which will save the necessory hardware parameters right before power down and recover them before system uses the hardware. Because added the dev_pm_ops, the old suspend/resume callbacks under platform_driver will not be called any more. Changed their prototypes and moved those two callbacks into dev_pm_ops too. Signed-off-by: Shenwei Wang <shenwei.wang@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: 8250_uniphier: call clk_disable_unprepare() on failure pathMasahiro Yamada2015-08-041-0/+1
| | | | | | | | | | | | | | | | | | | | If serial8250_register_8250_port() fails, disable and unprepare the clock before exiting. Fixes: 1a8d2903cb6a ("serial: 8250_uniphier: add UniPhier serial driver") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: 8250_pci: add RS485 for F81504/508/512Peter Hung2015-08-041-0/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add RS485 control for Fintek F81504/508/512 F81504/508/512 can control their RTS with H/W mode. PCI configuration space for each port is 0x40 + idx * 8 + 7. When it set with 0x01, it's configured with RS232 mode. RTS is controlled by MCR. When it set with 0x11, it's configured with RS485 mode. RTS is controlled by H/W, RTS low with idle & RX, high with TX. When it set with 0x31, it's configured with RS485 mode. RTS is controlled by H/W, RTS high with idle & RX, low with TX. We will force 0x01 on pci_fintek_setup(). Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Revert "tty: serial: imx.c: Reset UART before activating interrupts"Fabio Estevam2015-07-271-23/+9Star
| | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit e95044ba4fee93f5ea8a1a24b2d921e148503833. Commit e95044ba4fee93 ("tty: serial: imx.c: Reset UART before activating interrupts") terribly messes up with the console on mx6 boards, so let's revert it. Reported-by: kernelci.org bot <bot@kernelci.org> Cc: David Jander <david@protonic.nl> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-23 10:21:10 +0200