summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial
Commit message (Collapse)AuthorAgeFilesLines
* kgdboc: disable the console lock when in kgdbDouglas Anderson2019-07-301-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After commit ddde3c18b700 ("vt: More locking checks") kdb / kgdb has become useless because my console is filled with spews of: WARNING: CPU: 0 PID: 0 at .../drivers/tty/vt/vt.c:3846 con_is_visible+0x50/0x74 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.0-rc1+ #48 Hardware name: Rockchip (Device Tree) Backtrace: [<c020ce9c>] (dump_backtrace) from [<c020d188>] (show_stack+0x20/0x24) [<c020d168>] (show_stack) from [<c0a8fc14>] (dump_stack+0xb0/0xd0) [<c0a8fb64>] (dump_stack) from [<c0232c58>] (__warn+0xec/0x11c) [<c0232b6c>] (__warn) from [<c0232dc4>] (warn_slowpath_null+0x4c/0x58) [<c0232d78>] (warn_slowpath_null) from [<c06338a0>] (con_is_visible+0x50/0x74) [<c0633850>] (con_is_visible) from [<c0634078>] (con_scroll+0x108/0x1ac) [<c0633f70>] (con_scroll) from [<c0634160>] (lf+0x44/0x88) [<c063411c>] (lf) from [<c06363ec>] (vt_console_print+0x1a4/0x2bc) [<c0636248>] (vt_console_print) from [<c02f628c>] (vkdb_printf+0x420/0x8a4) [<c02f5e6c>] (vkdb_printf) from [<c02f6754>] (kdb_printf+0x44/0x60) [<c02f6714>] (kdb_printf) from [<c02fa6f4>] (kdb_main_loop+0xf4/0x6e0) [<c02fa600>] (kdb_main_loop) from [<c02fd5f0>] (kdb_stub+0x268/0x398) [<c02fd388>] (kdb_stub) from [<c02f3ba0>] (kgdb_cpu_enter+0x1f8/0x674) [<c02f39a8>] (kgdb_cpu_enter) from [<c02f4330>] (kgdb_handle_exception+0x1c4/0x1fc) [<c02f416c>] (kgdb_handle_exception) from [<c0210fe0>] (kgdb_compiled_brk_fn+0x30/0x3c) [<c0210fb0>] (kgdb_compiled_brk_fn) from [<c020d7ac>] (do_undefinstr+0x180/0x1a0) [<c020d62c>] (do_undefinstr) from [<c0201b44>] (__und_svc_finish+0x0/0x3c) ... [<c02f3224>] (kgdb_breakpoint) from [<c02f3310>] (sysrq_handle_dbg+0x58/0x6c) [<c02f32b8>] (sysrq_handle_dbg) from [<c062abf0>] (__handle_sysrq+0xac/0x154) Let's disable this warning when we're in kgdb to avoid the spew. The whole system is stopped when we're in kgdb so we can't exactly wait for someone else to drop the lock. Presumably the best we can do is to disable the warning and hope for the best. Fixes: ddde3c18b700 ("vt: More locking checks") Cc: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20190725183551.169208-1-dianders@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tty: serial: netx: Delete driverLinus Walleij2019-07-253-753/+0Star
| | | | | | | | | | | | The Netx ARM machine was deleted from the kernel. This driver had no users and has to go. Cc: Robert Schwebel <r.schwebel@pengutronix.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20190722065146.4844-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds2019-07-202-4/+43
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM SoC platform updates from Olof Johansson: "SoC platform changes. Main theme this merge window: - The Netx platform (Netx 100/500) platform is removed by Linus Walleij-- the SoC doesn't have active maintainers with hardware, and in discussions with the vendor the agreement was that it's OK to remove. - Russell King has a series of patches that cleans up and refactors SA1101 and RiscPC support" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits) ARM: stm32: use "depends on" instead of "if" after prompt ARM: sa1100: convert to common clock framework ARM: exynos: Cleanup cppcheck shifting warning ARM: pxa/lubbock: remove lubbock_set_misc_wr() from global view ARM: exynos: Only build MCPM support if used arm: add missing include platform-data/atmel.h ARM: davinci: Use GPIO lookup table for DA850 LEDs ARM: OMAP2: drop explicit assembler architecture ARM: use arch_extension directive instead of arch argument ARM: imx: Switch imx7d to imx-cpufreq-dt for speed-grading ARM: bcm: Enable PINCTRL for ARCH_BRCMSTB ARM: bcm: Enable ARCH_HAS_RESET_CONTROLLER for ARCH_BRCMSTB ARM: riscpc: enable chained scatterlist support ARM: riscpc: reduce IRQ handling code ARM: riscpc: move RiscPC assembly files from arch/arm/lib to mach-rpc ARM: riscpc: parse video information from tagged list ARM: riscpc: add ecard quirk for Atomwide 3port serial card MAINTAINERS: mvebu: Add git entry soc: ti: pm33xx: Add a print while entering RTC only mode with DDR in self-refresh ARM: OMAP2+: Make some variables static ...
| * Merge branch 'for-arm-soc' of git://git.armlinux.org.uk/~rmk/linux-arm into ↵Olof Johansson2019-07-162-4/+43
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | arm/soc * 'for-arm-soc' of git://git.armlinux.org.uk/~rmk/linux-arm: (21 commits) ARM: sa1100: convert to common clock framework ARM: riscpc: enable chained scatterlist support ARM: riscpc: reduce IRQ handling code ARM: riscpc: move RiscPC assembly files from arch/arm/lib to mach-rpc ARM: riscpc: parse video information from tagged list ARM: riscpc: add ecard quirk for Atomwide 3port serial card ARM: sa1100/neponset: convert serial to use gpiod APIs ARM: sa1100/hackkit: remove empty serial mctrl functions ARM: sa1100/badge4: remove commented out modem control initialisers ARM: sa1100/h3xxx: convert serial to gpiod APIs ARM: sa1100/assabet: convert serial to gpiod APIs serial: sa1100: add note about modem control signals serial: sa1100: add support for mctrl gpios ARM: riscpc: dma: use __iomem pointers for writing DMA ARM: riscpc: dma: improve address/length writing ARM: riscpc: dma: make state a local variable ARM: riscpc: dma: eliminate "cur_sg" scatterlist usage ARM: riscpc: fix DMA ARM: riscpc: fix ecard printing ARM: riscpc: fix lack of keyboard interrupts after irq conversion ... Signed-off-by: Olof Johansson <olof@lixom.net>
| | * serial: sa1100: add note about modem control signalsRussell King2019-06-041-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | As suggested by Uwe, add a note indicating that the modem control signals do not support interrupts, which precludes the driver from using mctrl_gpio_init(). Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
| | * serial: sa1100: add support for mctrl gpiosRussell King2019-06-042-4/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the generic mctrl gpio helper. This will allow us to convert several board files to use the gpiod tables to assign GPIOs to serial ports, rather than needing to have private function callbacks. If the generic mctrl gpio helper fails, ignore the mctrl gpios rather than preventing the (possibly console) serial port from being created. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
* | | docs: serial: move it to the driver-apiMauro Carvalho Chehab2019-07-151-1/+1
| | | | | | | | | | | | | | | | | | The contents of this directory is mostly driver-api stuff. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* | | docs: arm: convert docs to ReST and rename to *.rstMauro Carvalho Chehab2019-07-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Converts ARM the text files to ReST, preparing them to be an architecture book. The conversion is actually: - add blank lines and identation in order to identify paragraphs; - fix tables markups; - add some lists markups; - mark literal blocks; - adjust title markups. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Reviewed-by Corentin Labbe <clabbe.montjoie@gmail.com> # For sun4i-ss
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds2019-07-141-1/+1
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull sparc updates from David Miller: "Just a few small changes: - Fix console naming inconsistency with hypervisor consoles, from John Paul Adrian Glaubitz - Fix userland compilation due to use of u_int, from Masahiro Yamada" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Add missing newline at end of file sparc: fix unknown type name u_int in uapi header sparc: configs: Remove useless UEVENT_HELPER_PATH sparc: Remove redundant copy of the LGPL-2.0 sunhv: Fix device naming inconsistency between sunhv_console and sunhv_reg
| * | | sunhv: Fix device naming inconsistency between sunhv_console and sunhv_regJohn Paul Adrian Glaubitz2019-06-131-1/+1
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In d5a2aa24, the name in struct console sunhv_console was changed from "ttyS" to "ttyHV" while the name in struct uart_ops sunhv_pops remained unchanged. This results in the hypervisor console device to be listed as "ttyHV0" under /proc/consoles while the device node is still named "ttyS0": root@osaka:~# cat /proc/consoles ttyHV0 -W- (EC p ) 4:64 tty0 -WU (E ) 4:1 root@osaka:~# readlink /sys/dev/char/4:64 ../../devices/root/f02836f0/f0285690/tty/ttyS0 root@osaka:~# This means that any userland code which tries to determine the name of the device file of the hypervisor console device can not rely on the information provided by /proc/consoles. In particular, booting current versions of debian- installer inside a SPARC LDOM will fail with the installer unable to determine the console device. After renaming the device in struct uart_ops sunhv_pops to "ttyHV" as well, the inconsistency is fixed and it is possible again to determine the name of the device file of the hypervisor console device by reading the contents of /proc/console: root@osaka:~# cat /proc/consoles ttyHV0 -W- (EC p ) 4:64 tty0 -WU (E ) 4:1 root@osaka:~# readlink /sys/dev/char/4:64 ../../devices/root/f02836f0/f0285690/tty/ttyHV0 root@osaka:~# With this change, debian-installer works correctly when installing inside a SPARC LDOM. Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | tty: serial: fsl_lpuart: add imx8qxp supportFugang Duan2019-07-041-20/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The lpuart of imx8ulp is basically the same as imx7ulp, but it has new feature support based on imx7ulp, like it can assert a DMA request on EOP(end-of-packet). imx8ulp lpuart use two clocks, one is ipg bus clock that is used to access registers, the other is baud clock that is used to transmit-receive data. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Link: https://lore.kernel.org/r/20190704134007.2316-1-fugang.duan@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: imx: set_termios(): preserve RTS stateSergey Organov2019-07-031-5/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | imx_set_termios() cleared RTS on every call, now fixed. Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sergey Organov <sorganov@gmail.com> Link: https://lore.kernel.org/r/1561558293-7683-5-git-send-email-sorganov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: imx: set_termios(): clarify RTS/CTS bits calculationSergey Organov2019-07-031-24/+14Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Avoid repeating the same code for rs485 twice. Make it obvious we clear CRTSCTS bit in termios->c_cflag whenever sport->have_rtscts is false. Make it obvious we clear UCR2_IRTS whenever CRTSCTS is set. Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sergey Organov <sorganov@gmail.com> Link: https://lore.kernel.org/r/1561558293-7683-4-git-send-email-sorganov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: imx: set_termios(): factor-out 'ucr2' initial valueSergey Organov2019-07-031-3/+2Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Set common bits in a separate statement to make initialization explicit and not repeat the common part. Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sergey Organov <sorganov@gmail.com> Reviewed-by: Uwe Kleine-Knig <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/1561558293-7683-3-git-send-email-sorganov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: sh-sci: Terminate TX DMA during buffer flushingGeert Uytterhoeven2019-07-031-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While the .flush_buffer() callback clears sci_port.tx_dma_len since commit 1cf4a7efdc71cab8 ("serial: sh-sci: Fix race condition causing garbage during shutdown"), it does not terminate a transmit DMA operation that may be in progress. Fix this by terminating any pending DMA operations, and resetting the corresponding cookie. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com> Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com> Link: https://lore.kernel.org/r/20190624123540.20629-3-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: sh-sci: Fix TX DMA buffer flushing and workqueue racesGeert Uytterhoeven2019-07-031-7/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When uart_flush_buffer() is called, the .flush_buffer() callback zeroes the tx_dma_len field. This may race with the work queue function handling transmit DMA requests: 1. If the buffer is flushed before the first DMA API call, dmaengine_prep_slave_single() may be called with a zero length, causing the DMA request to never complete, leading to messages like: rcar-dmac e7300000.dma-controller: Channel Address Error happen and, with debug enabled: sh-sci e6e88000.serial: sci_dma_tx_work_fn: ffff800639b55000: 0...0, cookie 126 and DMA timeouts. 2. If the buffer is flushed after the first DMA API call, but before the second, dma_sync_single_for_device() may be called with a zero length, causing the transmit data not to be flushed to RAM, and leading to stale data being output. Fix this by: 1. Letting sci_dma_tx_work_fn() return immediately if the transmit buffer is empty, 2. Extending the critical section to cover all DMA preparational work, so tx_dma_len stays consistent for all of it, 3. Using local copies of circ_buf.head and circ_buf.tail, to make sure they match the actual operation above. Reported-by: Eugeniu Rosca <erosca@de.adit-jv.com> Suggested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com> Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com> Link: https://lore.kernel.org/r/20190624123540.20629-2-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: mpsc: Remove obsolete MPSC driverMark Greer2019-07-033-2153/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support for the Marvell MV64x60 line of bridge chips that contained MPSC controllers has been removed and there are no other components that have that controller so remove its driver. Signed-off-by: Mark Greer <mgreer@animalcreek.com> Link: https://lore.kernel.org/r/20190626160553.28518-1-mgreer@animalcreek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: 8250: 8250_core: Fix missing unlock on error in ↵Wei Yongjun2019-07-031-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | serial8250_register_8250_port() Add the missing unlock before return from function serial8250_register_8250_port() in the error handling case. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20190703055908.141294-1-weiyongjun1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: stm32: add RX and TX FIFO flushErwan Le Ray2019-06-211-5/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds a flush of RX and TX FIFOs, and fixes some errors: - adds RX FIFO flush in startup fonction - removes the useless transmitter enabling in startup fonction (e.g. receiver only, see Documentation/serial/driver) - configures FIFO threshold before enabling it, rather than after - flushes both TX and RX in set_termios function Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: stm32: add support of RX FIFO thresholdErwan Le Ray2019-06-212-3/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds the support of RX FIFO threshold in order to improve the RX FIFO management. This is done by enabling fifo threshold interrupt, instead of relying on rx empty/fifo not full irq. That basically generates one irq/char currently. With this patch: - RXCFG is set to half fifo size (e.g. 16/2 = 8 data for a 16 data depth FIFO) - irq rate may be reduced by up to 1/RXCFG, e.g. 1 over 8 with current RXCFG setting. - Receiver timeout is used to gather chars when FIFO threshold isn't reached. Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: stm32: add support of TX FIFO thresholdErwan Le Ray2019-06-212-9/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds the support of TX FIFO threshold in order to improve the TX FIFO management: - TX FIFO threshold irq enabling (instead of relying on tx empty / fifo not full irq that generates one irq/char) - TXCFG is set to half fifo size (e.g. 16/2 = 8 data for a 16 data depth FIFO) - irq rate may be reduced by up to 1/TXCFG, e.g. 1 over 8 with current TXCFG setting. Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: stm32: update PIO transmissionErwan Le Ray2019-06-211-14/+13Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Improves PIO transmission: - Replaces the FIFO filling per character by a filling per blocks of characters, which provides better performances - Replaces the active waiting loop by TX empty interrupt dynamic handling. TXE interrupt is now enabled when data has to be sent (ie when uart_circ is not empty), and inhibited when there is no more data to send (ie when uart_circ is empty). Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: stm32: add support of timeout interrupt for RXErwan Le Ray2019-06-212-6/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support of RX timeout interrupts to limit the number of interrupts. RX timeout is a number of bits (baud clock cycles) without transmission seen in the receiver. One character is used as an arbitrary RX timeout value. If parity is enabled, the number of bits has to include parity bit. Signed-off-by: Gerald Baeza <gerald.baeza@st.com> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | Revert "serial: 8250: Don't service RX FIFO if interrupts are disabled"Oliver Barta2019-06-211-2/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 2e9fe539108320820016f78ca7704a7342788380. Reading LSR unconditionally but processing the error flags only if UART_IIR_RDI bit was set before in IIR may lead to a loss of transmission error information on UARTs where the transmission error flags are cleared by a read of LSR. Information are lost in case an error is detected right before the read of LSR while processing e.g. an UART_IIR_THRI interrupt. Signed-off-by: Oliver Barta <o.barta89@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Fixes: 2e9fe5391083 ("serial: 8250: Don't service RX FIFO if interrupts are disabled") Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | tty/serial/8250: use mctrl_gpio helpersYegor Yefremov2019-06-215-15/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch permits the usage for GPIOs to control the CTS/RTS/DTR/DSR/DCD/RI signals. Changed by Stefan: Only call mctrl_gpio_init(), if the device has no ACPI companion device to not break existing ACPI based systems. Also only use the mctrl_gpio_ functions when "gpios" is available. Use MSR / MCR <-> TIOCM wrapper functions. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Yegor Yefremov <yegorslists@googlemail.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Giulio Benetti <giulio.benetti@micronovasrl.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: mctrl_gpio: Check if GPIO property exisits before requesting itStefan Roese2019-06-211-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a check for the GPIOs property existence, before the GPIO is requested. This fixes an issue seen when the 8250 mctrl_gpio support is added (2nd patch in this patch series) on x86 platforms using ACPI. Here Mika's comments from 2016-08-09: " I noticed that with v4.8-rc1 serial console of some of our Broxton systems does not work properly anymore. I'm able to see output but input does not work. I bisected it down to commit 4ef03d328769eddbfeca1f1c958fdb181a69c341 ("tty/serial/8250: use mctrl_gpio helpers"). The reason why it fails is that in ACPI we do not have names for GPIOs (except when _DSD is used) so we use the "idx" to index into _CRS GPIO resources. Now mctrl_gpio_init_noauto() goes through a list of GPIOs calling devm_gpiod_get_index_optional() passing "idx" of 0 for each. The UART device in Broxton has following (simplified) ACPI description: Device (URT4) { ... Name (_CRS, ResourceTemplate () { GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\_SB.GPO0", 0x00, ResourceConsumer) { 0x003A } GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\_SB.GPO0", 0x00, ResourceConsumer) { 0x003D } }) In this case it finds the first GPIO (0x003A which happens to be RX pin for that UART), turns it into GPIO which then breaks input for the UART device. This also breaks systems with bluetooth connected to UART (those typically have some GPIOs in their _CRS). Any ideas how to fix this? We cannot just drop the _CRS index lookup fallback because that would break many existing machines out there so maybe we can limit this to only DT enabled machines. Or alternatively probe if the property first exists before trying to acquire the GPIOs (using device_property_present()). " This patch implements the fix suggested by Mika in his statement above. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Yegor Yefremov <yegorslists@googlemail.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Giulio Benetti <giulio.benetti@micronovasrl.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: 8250: pericom_do_set_divisor can be statickbuild test robot2019-06-181-1/+1
| | | | | | | | | | | | | | | | | | Fixes: 6bf4e42f1d19 ("serial: 8250: Add support for higher baud rates to Pericom chips") Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | tty: serial_core: Set port active bit in uart_port_activateSerge Semin2019-06-181-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A bug was introduced by commit b3b576461864 ("tty: serial_core: convert uart_open to use tty_port_open"). It caused a constant warning printed into the system log regarding the tty and port counter mismatch: [ 21.644197] ttyS ttySx: tty_port_close_start: tty->count = 1 port count = 2 in case if session hangup was detected so the warning is printed starting from the second open-close iteration. Particularly the problem was discovered in situation when there is a serial tty device without hardware back-end being setup. It is considered by the tty-serial subsystems as a hardware problem with session hang up. In this case uart_startup() will return a positive value with TTY_IO_ERROR flag set in corresponding tty_struct instance. The same value will get passed to be returned from the activate() callback and then being returned from tty_port_open(). But since in this case tty_port_block_til_ready() isn't called the TTY_PORT_ACTIVE flag isn't set (while the method had been called before tty_port_open conversion was introduced and the rest of the subsystem code expected the bit being set in this case), which prevents the uart_hangup() method to perform any cleanups including the tty port counter setting to zero. So the next attempt to open/close the tty device will discover the counters mismatch. In order to fix the problem we need to manually set the TTY_PORT_ACTIVE flag in case if uart_startup() returned a positive value. In this case the hang up procedure will perform a full set of cleanup actions including the port ref-counter resetting. Fixes: b3b576461864 "tty: serial_core: convert uart_open to use tty_port_open" Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: 8250: Add MSR/MCR TIOCM conversion wrapper functionsStefan Roese2019-06-182-22/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds wrapper functions to convert MSR <-> TIOCM and also MCR <-> TIOCM. These functions are used now in serial8250_do_set_mctrl() and serial8250_do_get_mctrl(). Signed-off-by: Stefan Roese <sr@denx.de> Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Giulio Benetti <giulio.benetti@micronovasrl.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: 8250: factor out serial8250_{set,clear}_THRI() helpersAndy Shevchenko2019-06-184-27/+26Star
| | | | | | | | | | | | | | | | | | | | | | | | Factor out similar code pieces that set or clear UART_IER_THRI bit to serial8250_{set,clear}_THRI() helpers. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: fsl_lpuart: Remove unneeded OOM error messageFabio Estevam2019-06-181-3/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no need to add an out-of-memory error message inside the driver because the core MM code will take care of it. Remove the unneeded OOM error message. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: uartps: Remove useless return from cdns_uart_poll_put_charNava kishore Manne2019-06-181-2/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no reason to call return at the end of function which should return void. The patch is also remove one checkpatch warning: WARNING: void function return statements are not generally useful + return; +} Fixes: 6ee04c6c5488 ("tty: xuartps: Add polled mode support for xuartps") Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: uartps: Do not add a trailing semicolon to macroNava kishore Manne2019-06-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes this checkpatch warning: WARNING: macros should not use a trailing semicolon +#define to_cdns_uart(_nb) container_of(_nb, struct cdns_uart, \ + clk_rate_change_nb); Fixes: d9bb3fb12685 ("tty: xuartps: Rebrand driver as Cadence UART") Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: uartps: Fix long line over 80 charsNava kishore Manne2019-06-181-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Trivial patch which fixes one checkpatch warning: WARNING: line over 80 characters + !(readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXFULL)) { Fixes: c8dbdc842d30 ("serial: xuartps: Rewrite the interrupt handling logic") Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: uartps: Fix multiple line dereferenceNava kishore Manne2019-06-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Trivial patch which fixes this checkpatch warning: WARNING: Avoid multiple line dereference - prefer 'port->state->xmit.tail' + port->state->xmit.buf[port->state->xmit. + tail], port->membase + CDNS_UART_FIFO); Fixes: c8dbdc842d30 ("serial: xuartps: Rewrite the interrupt handling logic") Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: uartps: Use octal permission for module_param()Nava kishore Manne2019-06-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Octal permission is preffered compare to symbolic one. This patch fixes checkpatch warnings: Symbolic permissions 'S_IRUGO' are not preferred. Consider using octal permissions '0444'. Fixes: 85baf542d54e ("tty: xuartps: support 64 byte FIFO size") Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: uartps: Use the same dynamic major number for all portsShubhrajyoti Datta2019-06-181-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Let kernel to find out major number dynamically for the first device and then reuse it for other instances. This fixes the issue that each uart is registered with a different major number. After the patch: crw------- 1 root root 253, 0 Jun 10 08:31 /dev/ttyPS0 crw--w---- 1 root root 253, 1 Jan 1 1970 /dev/ttyPS1 Fixes: 024ca329bfb9 ("serial: uartps: Register own uart console and driver structures") Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: 8250: Add support for higher baud rates to Pericom chipsJay Dolan2019-06-181-18/+79
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Pericom chips can achieve additional baud rates by programming the sample clock register. The baud rates can be described as 921600 * 16 / (16 - scr) for scr values 5 to 15. The divisor is set to 1 for these baud rates. Adds new quirk for Pericom chips other than the four port chips to use the Signed-off-by: Jay Dolan <jay.dolan@accesio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: imx: fix locking in set_termios()Sergey Organov2019-06-181-10/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | imx_uart_set_termios() called imx_uart_rts_active(), or imx_uart_rts_inactive() before taking port->port.lock. As a consequence, sport->port.mctrl that these functions modify could have been changed without holding port->port.lock. Moved locking of port->port.lock above the calls to fix the issue. Signed-off-by: Sergey Organov <sorganov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | Revert "serial: stm32: select pinctrl state in each suspend/resume function"Greg Kroah-Hartman2019-06-131-4/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit c70669ecef4e34af8913108fae4b8a9b1dc63fa1 as it breaks the build. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: kbuild test robot <lkp@intel.com> Cc: Bich Hemon <bich.hemon@st.com> Cc: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | tty: serial: msm_serial: avoid system lockup conditionJorge Ramirez-Ortiz2019-06-101-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function msm_wait_for_xmitr can be taken with interrupts disabled. In order to avoid a potential system lockup - demonstrated under stress testing conditions on SoC QCS404/5 - make sure we wait for a bounded amount of time. Tested on SoC QCS404. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: 8250: Fix TX interrupt handling conditionRautkoski Kimmo EXT2019-06-101-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Interrupt handler checked THRE bit (transmitter holding register empty) in LSR to detect if TX fifo is empty. In case when there is only receive interrupts the TX handling got called because THRE bit in LSR is set when there is no transmission (FIFO empty). TX handling caused TX stop, which in RS-485 half-duplex mode actually resets receiver FIFO. This is not desired during reception because of possible data loss. The fix is to check if THRI is set in IER in addition of the TX fifo status. THRI in IER is set when TX is started and cleared when TX is stopped. This ensures that TX handling is only called when there is really transmission on going and an interrupt for THRE and not when there are only RX interrupts. Signed-off-by: Kimmo Rautkoski <ext-kimmo.rautkoski@vaisala.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: stm32: fix a recursive locking in stm32_config_rs485Borut Seljak2019-06-101-3/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | Remove spin_lock_irqsave in stm32_config_rs485, it cause recursive locking. Already locked in uart_set_rs485_config. Fixes: 1bcda09d291081 ("serial: stm32: add support for RS485 hardware control mode") Signed-off-by: Borut Seljak <borut.seljak@t-2.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | tty: serial: 8250-of: Do not warn on deferred probeThierry Reding2019-06-101-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Deferred probe is an expected return value for clk_get() on many platforms. The driver deals with it properly, so there's no need to output a warning that may potentially confuse users. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: imx: Use dev_info() instead of pr_info()Fabio Estevam2019-06-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | dev_info() is more appropriate for printing messages inside drivers, so switch to dev_info(). Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: fsl_lpuart: Use dev_info() instead of printk()Fabio Estevam2019-06-101-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | dev_info() is more appropriate for printing messages inside drivers, so switch to dev_info(). Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | uart: mediatek: support Rx in-band wakeupClaire Chang2019-06-101-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to support Rx in-band wakeup, we need to enable irq wake on an edge sensitive interrupt of Rx pin before suspend and disable it when resuming. This interrupt is used only as wake source to resume the system when suspended. Note that the sent character will be lost as the controller is actually suspended. We use this to support wakeup on bluetooth. Bluetooth will repeatedly send 0xFD to wakeup host. Once host detects Rx falling, an interrupt is triggered, and the system leaves sleep state. Then, the bluetooth driver will send 0xFC to bluetooth and bluetooth can start to send normal HCI packets. Signed-off-by: Claire Chang <tientzu@chromium.org> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: uartps: Add a timeout to the tx empty waitShubhrajyoti Datta2019-06-101-4/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case the cable is not connected then the target gets into an infinite wait for tx empty. Add a timeout to the tx empty wait. Reported-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: uartps: Move the spinlock after the read of the tx emptyShubhrajyoti Datta2019-06-101-2/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | Currently we are doing a read of the status register. Move the spinlock after that as the reads need not be spinlock protected. This patch prevents relaxing the cpu with spinlock held. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | serial: 8250-mtk: modify uart DMA rxLong Cheng2019-06-101-29/+20Star
| | | | | | | | | | | | | | | | | | | | | | | | Modify uart rx and complete for DMA Signed-off-by: Long Cheng <long.cheng@mediatek.com> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-01 11:37:02 +0200