1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
|
Berkshire Products PC Watchdog Card
Support for ISA Cards Revision A and C
Documentation and Driver by Ken Hollis <kenji@bitgate.com>
The PC Watchdog is a card that offers the same type of functionality that
the WDT card does, only it doesn't require an IRQ to run. Furthermore,
the Revision C card allows you to monitor any IO Port to automatically
trigger the card into being reset. This way you can make the card
monitor hard drive status, or anything else you need.
The Watchdog Driver has one basic role: to talk to the card and send
signals to it so it doesn't reset your computer ... at least during
normal operation.
The Watchdog Driver will automatically find your watchdog card, and will
attach a running driver for use with that card. After the watchdog
drivers have initialized, you can then talk to the card using the PC
Watchdog program, available from http://ftp.bitgate.com/pcwd/.
I suggest putting a "watchdog -d" before the beginning of an fsck, and
a "watchdog -e -t 1" immediately after the end of an fsck. (Remember
to run the program with an "&" to run it in the background!)
If you want to write a program to be compatible with the PC Watchdog
driver, simply do the following:
-- Snippet of code --
/*
* Watchdog Driver Test Program
*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#include <linux/types.h>
#include <linux/watchdog.h>
int fd;
/*
* This function simply sends an IOCTL to the driver, which in turn ticks
* the PC Watchdog card to reset its internal timer so it doesn't trigger
* a computer reset.
*/
void keep_alive(void)
{
int dummy;
ioctl(fd, WDIOC_KEEPALIVE, &dummy);
}
/*
* The main program. Run the program with "-d" to disable the card,
* or "-e" to enable the card.
*/
int main(int argc, char *argv[])
{
fd = open("/dev/watchdog", O_WRONLY);
if (fd == -1) {
fprintf(stderr, "Watchdog device not enabled.\n");
fflush(stderr);
exit(-1);
}
if (argc > 1) {
if (!strncasecmp(argv[1], "-d", 2)) {
ioctl(fd, WDIOC_SETOPTIONS, WDIOS_DISABLECARD);
fprintf(stderr, "Watchdog card disabled.\n");
fflush(stderr);
exit(0);
} else if (!strncasecmp(argv[1], "-e", 2)) {
ioctl(fd, WDIOC_SETOPTIONS, WDIOS_ENABLECARD);
fprintf(stderr, "Watchdog card enabled.\n");
fflush(stderr);
exit(0);
} else {
fprintf(stderr, "-d to disable, -e to enable.\n");
fprintf(stderr, "run by itself to tick the card.\n");
fflush(stderr);
exit(0);
}
} else {
fprintf(stderr, "Watchdog Ticking Away!\n");
fflush(stderr);
}
while(1) {
keep_alive();
sleep(1);
}
}
-- End snippet --
Other IOCTL functions include:
WDIOC_GETSUPPORT
This returns the support of the card itself. This
returns in structure "PCWDS" which returns:
options = WDIOS_TEMPPANIC
(This card supports temperature)
firmware_version = xxxx
(Firmware version of the card)
WDIOC_GETSTATUS
This returns the status of the card, with the bits of
WDIOF_* bitwise-anded into the value. (The comments
are in linux/pcwd.h)
WDIOC_GETBOOTSTATUS
This returns the status of the card that was reported
at bootup.
WDIOC_GETTEMP
This returns the temperature of the card. (You can also
read /dev/watchdog, which gives a temperature update
every second.)
WDIOC_SETOPTIONS
This lets you set the options of the card. You can either
enable or disable the card this way.
WDIOC_KEEPALIVE
This pings the card to tell it not to reset your computer.
And that's all she wrote!
-- Ken Hollis
(kenji@bitgate.com)
(This documentation may be out of date. Check
http://ftp.bitgate.com/pcwd/ for the absolute latest additions.)
|
