1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
|
/*
* Copyright 2017 Armadeus Systems <support@armadeus.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public
* License along with this file; if not, write to the Free
* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
* MA 02110-1301 USA
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "imx6ul-opos6ul.dtsi"
/ {
model = "Armadeus Systems OPOS6UL SoM on OPOS6ULDev board";
compatible = "armadeus,opos6uldev", "armadeus,opos6ul", "fsl,imx6ul";
chosen {
stdout-path = &uart1;
};
backlight {
compatible = "pwm-backlight";
pwms = <&pwm3 0 191000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
power-supply = <®_5v>;
status = "okay";
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
user-button {
label = "User button";
gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
linux,code = <BTN_MISC>;
wakeup-source;
};
};
leds {
compatible = "gpio-leds";
user-led {
label = "User";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led>;
gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
onewire {
compatible = "w1-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_w1>;
gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
};
reg_5v: regulator-5v {
compatible = "regulator-fixed";
regulator-name = "5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
reg_usbotg1_vbus: regulator-usbotg1vbus {
compatible = "regulator-fixed";
regulator-name = "usbotg1vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg1_vbus>;
gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usbotg2_vbus: regulator-usbotg2vbus {
compatible = "regulator-fixed";
regulator-name = "usbotg2vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg2_vbus>;
gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&adc1 {
vref-supply = <®_3v3>;
status = "okay";
};
&can1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1>;
xceiver-supply = <®_5v>;
status = "okay";
};
&can2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan2>;
xceiver-supply = <®_5v>;
status = "okay";
};
&ecspi4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi4>;
cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>;
status = "okay";
spidev0: spi@0 {
compatible = "spidev";
reg = <0>;
spi-max-frequency = <5000000>;
};
spidev1: spi@1 {
compatible = "spidev";
reg = <1>;
spi-max-frequency = <5000000>;
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clock_frequency = <400000>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clock_frequency = <400000>;
status = "okay";
};
&lcdif {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcdif>;
display = <&display0>;
lcd-supply = <®_3v3>;
status = "okay";
display0: display0 {
bits-per-pixel = <32>;
bus-width = <18>;
display-timings {
timing0: timing0 {
clock-frequency = <33000033>;
hactive = <800>;
vactive = <480>;
hback-porch = <96>;
hfront-porch = <96>;
vback-porch = <20>;
vfront-porch = <21>;
hsync-len = <64>;
vsync-len = <4>;
de-active = <1>;
pixelclk-active = <0>;
};
};
};
};
&pwm3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm3>;
status = "okay";
};
&snvs_pwrkey {
status = "disabled";
};
&tsc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tsc>;
xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
measure-delay-time = <0xffff>;
pre-charge-time = <0xffff>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&usbotg1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg1_id>;
vbus-supply = <®_usbotg1_vbus>;
dr_mode = "otg";
disable-over-current;
status = "okay";
};
&usbotg2 {
vbus-supply = <®_usbotg2_vbus>;
dr_mode = "host";
disable-over-current;
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpios>;
pinctrl_ecspi4: ecspi4grp {
fsl,pins = <
MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK 0x1b0b0
MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI 0x1b0b0
MX6UL_PAD_NAND_DATA06__ECSPI4_MISO 0x1b0b0
MX6UL_PAD_NAND_DATA01__GPIO4_IO03 0x1b0b0
MX6UL_PAD_NAND_DATA07__GPIO4_IO09 0x1b0b0
>;
};
pinctrl_flexcan1: flexcan1grp {
fsl,pins = <
MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0
MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0
>;
};
pinctrl_flexcan2: flexcan2grp {
fsl,pins = <
MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x0b0b0
MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x0b0b0
>;
};
pinctrl_gpios: gpiosgrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x0b0b0
MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x0b0b0
MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x0b0b0
MX6UL_PAD_NAND_RE_B__GPIO4_IO00 0x0b0b0
MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x0b0b0
MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0b0b0
MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0b0b0
MX6UL_PAD_NAND_WE_B__GPIO4_IO01 0x0b0b0
MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x0b0b0
MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x0b0b0
MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0b0b0
MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0b0b0
MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0b0
MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x0b0b0
MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x0b0b0
MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x0b0b0
>;
};
pinctrl_gpio_keys: gpiokeysgrp {
fsl,pins = <
MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x0b0b0
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
>;
};
pinctrl_lcdif: lcdifgrp {
fsl,pins = <
MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x100b1
MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x100b1
MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x100b1
MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x100b1
MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x100b1
MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x100b1
MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x100b1
MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x100b1
MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x100b1
MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x100b1
MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x100b1
MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x100b1
MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x100b1
MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x100b1
MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x100b1
MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x100b1
MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x100b1
MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x100b1
MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x100b1
MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x100b1
MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x100b1
MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x100b1
>;
};
pinctrl_led: ledgrp {
fsl,pins = <
MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x0b0b0
>;
};
pinctrl_pwm3: pwm3grp {
fsl,pins = <
MX6UL_PAD_NAND_ALE__PWM3_OUT 0x1b0b0
>;
};
pinctrl_tsc: tscgrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0
MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0
MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0
MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
>;
};
pinctrl_usbotg1_id: usbotg1idgrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x1b0b0
>;
};
pinctrl_usbotg1_vbus: usbotg1vbusgrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x1b0b0
>;
};
pinctrl_usbotg2_vbus: usbotg2vbusgrp {
fsl,pins = <
MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0
>;
};
pinctrl_w1: w1grp {
fsl,pins = <
MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x0b0b0
>;
};
};
|
