build-sys: move agetty to term-utils

Signed-off-by: Karel Zak <kzak@redhat.com>

1 files changed, 0 insertions, 307 deletions

diff --git a/login-utils/agetty.8 b/login-utils/agetty.8
deleted file mode 100644
index a7f3bd054..000000000
--- a/login-utils/agetty.8
+++ /dev/null
@@ -1,307 +0,0 @@
-.TH AGETTY 8 
-.SH NAME
-agetty \- alternative Linux getty
-
-.SH SYNOPSIS
-.BR "agetty " [\-c8ihLmnsUw]
-.RI "[-f " issue_file ]
-.RI "[-l " login_program ]
-.RI "[-I " init ]
-.RI "[-t " timeout ]
-.RI "[-H " login_host ]
-.I port
-.I baud_rate,...
-.RI [ term ]
-
-.SH DESCRIPTION
-.ad
-.fi
-\fBagetty\fP opens a tty port, prompts for a login name and invokes
-the /bin/login command. It is normally invoked by \fIinit(8)\fP.
-
-\fBagetty\fP has several \fInon-standard\fP features that are useful
-for hard-wired and for dial-in lines:
-.IP o
-Adapts the tty settings to parity bits and to erase, kill,
-end-of-line and uppercase characters when it reads a login name.
-The program can handle 7-bit characters with even, odd, none or space
-parity, and 8-bit characters with no parity. The following special
-characters are recognized: @ and Control-U (kill); #, DEL and
-back space (erase); carriage return and line feed (end of line).
-.IP o
-Optionally deduces the baud rate from the CONNECT messages produced by
-Hayes(tm)-compatible modems.
-.IP o
-Optionally does not hang up when it is given an already opened line
-(useful for call-back applications).
-.IP o
-Optionally does not display the contents of the \fI/etc/issue\fP file.
-.IP o
-Optionally displays an alternative issue file instead of \fI/etc/issue\fP.
-.IP o
-Optionally does not ask for a login name.
-.IP o
-Optionally invokes a non-standard login program instead of
-\fI/bin/login\fP.
-.IP o
-Optionally turns on hard-ware flow control
-.IP o
-Optionally forces the line to be local with no need for carrier detect.
-.PP
-This program does not use the \fI/etc/gettydefs\fP (System V) or
-\fI/etc/gettytab\fP (SunOS 4) files.
-.SH ARGUMENTS
-.na
-.nf
-.fi
-.ad
-.TP
-port
-A path name relative to the \fI/dev\fP directory. If a "-" is
-specified, \fBagetty\fP assumes that its standard input is
-already connected to a tty port and that a connection to a
-remote user has already been established.
-.sp
-Under System V, a "-" \fIport\fP argument should be preceded
-by a "--".
-.TP
-baud_rate,...
-A comma-separated list of one or more baud rates. Each time
-\fBagetty\fP receives a BREAK character it advances through
-the list, which is treated as if it were circular.
-.sp
-Baud rates should be specified in descending order, so that the
-null character (Ctrl-@) can also be used for baud rate switching.
-.TP
-term
-The value to be used for the TERM environment variable. This overrides
-whatever init(8) may have set, and is inherited by login and the shell.
-.SH OPTIONS
-.na
-.nf
-.fi
-.ad
-.TP
-\-c
-Don't reset terminal cflags (control modes). See \fItermios(3)\fP for more
-details.
-.TP
-\-8
-Assume that the tty is 8-bit clean, hence disable parity detection.
-.TP
-\-h
-Enable hardware (RTS/CTS) flow control. It is left up to the
-application to disable software (XON/XOFF) flow protocol where
-appropriate.
-.TP
-\-i
-Do not display the contents of \fI/etc/issue\fP (or other) before writing the
-login prompt. Terminals or communications hardware may become confused
-when receiving lots of text at the wrong baud rate; dial-up scripts
-may fail if the login prompt is preceded by too much text.
-.TP
-\-f \fIissue_file\fP
-Display the contents of \fIissue_file\fP instead of \fI/etc/issue\fP.
-This allows custom messages to be displayed on different terminals.
-The \-i option will override this option.
-.TP
-\-I \fIinitstring\fP
-Set an initial string to be sent to the tty or modem before sending
-anything else. This may be used to initialize a modem.  Non printable
-characters may be sent by writing their octal code preceded by a
-backslash (\\). For example to send a linefeed character (ASCII 10,
-octal 012) write \\012.
-.PP
-.TP
-\-l \fIlogin_program\fP
-Invoke the specified \fIlogin_program\fP instead of /bin/login.
-This allows the use of a non-standard login program (for example,
-one that asks for a dial-up password or that uses a different
-password file).
-.TP
-\-H \fIlogin_host\fP
-Write the specified \fIlogin_host\fP into the utmp file. (Normally,
-no login host is given, since \fBagetty\fP is used for local hardwired
-connections and consoles. However, this option can be useful for 
-identifying terminal concentrators and the like.
-.TP
-\-m
-Try to extract the baud rate the CONNECT status message
-produced by Hayes(tm)\-compatible modems. These status
-messages are of the form: "<junk><speed><junk>".
-\fBagetty\fP assumes that the modem emits its status message at
-the same speed as specified with (the first) \fIbaud_rate\fP value
-on the command line.
-.sp
-Since the \fI\-m\fP feature may fail on heavily-loaded systems,
-you still should enable BREAK processing by enumerating all
-expected baud rates on the command line.
-.TP 
-\-n 
-Do not prompt the user for a login name. This can be used in
-connection with \-l option to invoke a non-standard login process such
-as a BBS system. Note that with the \-n option, \fBagetty\fR gets no input from
-user who logs in and therefore won't be able to figure out parity,
-character size, and newline processing of the connection. It defaults to 
-space parity, 7 bit characters, and ASCII CR (13) end-of-line character.
-Beware that the program that \fBagetty\fR starts (usually /bin/login)
-is run as root.
-.TP
-\-t \fItimeout\fP
-Terminate if no user name could be read within \fItimeout\fP
-seconds. This option should probably not be used with hard-wired
-lines.
-.TP
-\-L
-Force the line to be a local line with no need for carrier detect. This can
-be useful when you have a locally attached terminal where the serial line
-does not set the carrier detect signal.
-.TP
-\-s
-Try to keep the existing baud rate. The baud rates from
-the command line are used when agetty receives a BREAK character.
-.TP
-\-U
-Turn on support for detecting an uppercase only terminal.  This setting will
-detect a login name containing only capitals as indicating an uppercase
-only terminal and turn on some upper to lower case conversions.  Note that
-this has no support for any unicode characters.
-.TP
-\-w 
-Wait for the user or the modem to send a carriage-return or a
-linefeed character before sending the \fI/etc/issue\fP (or other) file
-and the login prompt. Very useful in connection with the \-I option.
-.PP
-.SH EXAMPLES
-This section shows examples for the process field of an entry in the
-\fI/etc/inittab\fP file.  You'll have to prepend appropriate values
-for the other fields.  See \fIinittab(5)\fP for more details.
-
-For a hard-wired line or a console tty:
-.ti +5
-/sbin/agetty 9600 ttyS1
-
-For a directly connected terminal without proper carriage detect wiring:
-(try this if your terminal just sleeps instead of giving you a password:
-prompt.)
-.ti +5
-/sbin/agetty \-L 9600 ttyS1 vt100
-
-For a old style dial-in line with a 9600/2400/1200 baud modem:
-.ti +5
-/sbin/agetty \-mt60 ttyS1 9600,2400,1200
-
-For a Hayes modem with a fixed 115200 bps interface to the machine:
-(the example init string turns off modem echo and result codes, makes
-modem/computer DCD track modem/modem DCD, makes a DTR drop cause a 
-dis-connection and turn on auto-answer after 1 ring.)
-.ti +5
-/sbin/agetty \-w \-I 'ATE0Q1&D2&C1S0=1\\015' 115200 ttyS1
-
-.SH ISSUE ESCAPES
-The issue-file (\fI/etc/issue\fP or the file set with the \-f option)
-may contain certain escape codes to display the system name, date and
-time etc. All escape codes consist of a backslash (\\) immediately
-followed by one of the letters explained below.
-
-.TP
-b
-Insert the baudrate of the current line.
-.TP
-d
-Insert the current date.
-.TP
-s
-Insert the system name, the name of the operating system.
-.TP
-l
-Insert the name of the current tty line.
-.TP
-m
-Insert the architecture identifier of the machine, eg. i486
-.TP
-n
-Insert the nodename of the machine, also known as the hostname.
-.TP
-o
-Insert the NIS domainname of the machine.
-.TP
-O
-Insert the DNS domainname of the machine.
-.TP
-r
-Insert the release number of the OS, eg. 1.1.9.
-.TP
-t
-Insert the current time.
-.TP
-u
-Insert the number of current users logged in.
-.TP
-U
-Insert the string "1 user" or "<n> users" where <n> is the number of current
-users logged in.
-.TP
-v
-Insert the version of the OS, eg. the build-date etc.
-.TP
-Example: On my system, the following \fI/etc/issue\fP file:
-
-.na
-.nf
-.ti +.5
-This is \\n.\\o (\\s \\m \\r) \\t
-.TP
-displays as
-
-.ti +.5
-This is thingol.orcan.dk (Linux i386 1.1.9) 18:29:30
-
-.fi
-
-.SH FILES
-.na
-.nf
-/var/run/utmp, the system status file.
-/etc/issue, printed before the login prompt.
-/dev/console, problem reports (if syslog(3) is not used).
-/etc/inittab, \fIinit\fP(8) configuration file.
-.SH BUGS
-.ad
-.fi
-The baud-rate detection feature (the \fI-m\fP option) requires that
-\fBagetty\fP be scheduled soon enough after completion of a dial-in
-call (within 30 ms with modems that talk at 2400 baud). For robustness,
-always use the \fI\-m\fP option in combination with a multiple baud
-rate command-line argument, so that BREAK processing is enabled.
-
-The text in the \fI/etc/issue\fP file (or other) and the login prompt
-are always output with 7-bit characters and space parity.
-
-The baud-rate detection feature (the \fI-m\fP option) requires that
-the modem emits its status message \fIafter\fP raising the DCD line.
-.SH DIAGNOSTICS
-.ad
-.fi
-Depending on how the program was configured, all diagnostics are
-written to the console device or reported via the syslog(3) facility.
-Error messages are produced if the \fIport\fP argument does not
-specify a terminal device; if there is no utmp entry for the
-current process (System V only); and so on.
-.SH AUTHOR(S)
-.na
-.nf
-W.Z. Venema <wietse@wzv.win.tue.nl>
-Eindhoven University of Technology
-Department of Mathematics and Computer Science
-Den Dolech 2, P.O. Box 513, 5600 MB Eindhoven, The Netherlands
-
-Peter Orbaek <poe@daimi.aau.dk>
-Linux port and more options. Still maintains the code.
-
-Eric Rasmussen <ear@usfirst.org>
-Added \-f option to display custom login messages on different terminals.
-
-.SH AVAILABILITY
-The agetty command is part of the util-linux package and is available from
-ftp://ftp.kernel.org/pub/linux/utils/util-linux/.