diff options
Diffstat (limited to 'example.files/rc.serial')
| -rw-r--r-- | example.files/rc.serial | 194 |
1 files changed, 194 insertions, 0 deletions
diff --git a/example.files/rc.serial b/example.files/rc.serial new file mode 100644 index 000000000..1f3b07d03 --- /dev/null +++ b/example.files/rc.serial @@ -0,0 +1,194 @@ +# +# /etc/rc.serial +# Initializes the serial ports on your system +# +# Distributed with setserial version 2.10 +# + +# Standard flags you want your serial devices to have +# Examples: SAK, pgrp_lockout, session_lockout +# +STD_FLAGS="session_lockout" + +SETSERIAL=/sbin/setserial + +echo -n "Configuring serial ports...." + +# Do wild interrupt detection +# +${SETSERIAL} -W /dev/cua0 + +############################################################### +# +# AUTOMATIC CONFIGURATION +# +# Uncomment the appropriate lines below to enable auto-configuration +# of a particular board. Or comment them out to disable them.... +# +# NOTE! Although the automatic configuration is enabled by default, +# I strongly suggest that you comment out this section and use the +# manual configuration section instead. It's more work to set up, but +# it's more reliable. +# +############################################################### + +# Do AUTOMATIC_IRQ probing +# +AUTO_IRQ=auto_irq + +# These are the standard COM1 through COM4 devices +# +# If you have an internal modeme with a Rockwell Chipset, add a "skip_test" +# to the /dev/cua3 line below. (It's not added by default because it will +# screw up people with 8514 displays). +# +${SETSERIAL} /dev/cua0 ${AUTO_IRQ} skip_test autoconfig ${STD_FLAGS} +${SETSERIAL} /dev/cua1 ${AUTO_IRQ} skip_test autoconfig ${STD_FLAGS} +${SETSERIAL} /dev/cua2 ${AUTO_IRQ} skip_test autoconfig ${STD_FLAGS} +${SETSERIAL} /dev/cua3 ${AUTO_IRQ} autoconfig ${STD_FLAGS} + +# These are for the first AST Fourport board (base address 0x1A0) +# +${SETSERIAL} /dev/cua4 ${AUTO_IRQ} autoconfig ${STD_FLAGS} +${SETSERIAL} /dev/cua5 ${AUTO_IRQ} autoconfig ${STD_FLAGS} +${SETSERIAL} /dev/cua6 ${AUTO_IRQ} autoconfig ${STD_FLAGS} +${SETSERIAL} /dev/cua7 ${AUTO_IRQ} autoconfig ${STD_FLAGS} + +# These are for the second AST Fourport board (base address 0x2A0) +# +${SETSERIAL} /dev/cua8 ${AUTO_IRQ} autoconfig ${STD_FLAGS} +${SETSERIAL} /dev/cua9 ${AUTO_IRQ} autoconfig ${STD_FLAGS} +${SETSERIAL} /dev/cua10 ${AUTO_IRQ} autoconfig ${STD_FLAGS} +${SETSERIAL} /dev/cua11 ${AUTO_IRQ} autoconfig ${STD_FLAGS} + +# These are the 3rd and 4th ports on the Accent Async board. +# +#${SETSERIAL} /dev/cua12 ${AUTO_IRQ} autoconfig ${STD_FLAGS} +#${SETSERIAL} /dev/cua13 ${AUTO_IRQ} autoconfig ${STD_FLAGS} + +# Usenet Serial Board II (base address 0x100) +# +#${SETSERIAL} /dev/cua16 ${AUTO_IRQ} autoconfig ${STD_FLAGS} +#${SETSERIAL} /dev/cua17 ${AUTO_IRQ} autoconfig ${STD_FLAGS} +#${SETSERIAL} /dev/cua18 ${AUTO_IRQ} autoconfig ${STD_FLAGS} +#${SETSERIAL} /dev/cua19 ${AUTO_IRQ} autoconfig ${STD_FLAGS} + + +# BocaBoard 4 port (BB-1004) (base address 0x100) +# +#${SETSERIAL} /dev/cua16 ${AUTO_IRQ} autoconfig ${STD_FLAGS} +#${SETSERIAL} /dev/cua17 ${AUTO_IRQ} autoconfig ${STD_FLAGS} +#${SETSERIAL} /dev/cua18 ${AUTO_IRQ} autoconfig ${STD_FLAGS} +#${SETSERIAL} /dev/cua19 ${AUTO_IRQ} autoconfig ${STD_FLAGS} + +# BocaBoard 8 port (BB-1008) (base address 0x100), +# or two BB-1004's (base addresses 0x100 and 0x120) +# +#${SETSERIAL} /dev/cua16 ${AUTO_IRQ} autoconfig ${STD_FLAGS} +#${SETSERIAL} /dev/cua17 ${AUTO_IRQ} autoconfig ${STD_FLAGS} +#${SETSERIAL} /dev/cua18 ${AUTO_IRQ} autoconfig ${STD_FLAGS} +#${SETSERIAL} /dev/cua19 ${AUTO_IRQ} autoconfig ${STD_FLAGS} +#${SETSERIAL} /dev/cua20 ${AUTO_IRQ} autoconfig ${STD_FLAGS} +#${SETSERIAL} /dev/cua21 ${AUTO_IRQ} autoconfig ${STD_FLAGS} +#${SETSERIAL} /dev/cua22 ${AUTO_IRQ} autoconfig ${STD_FLAGS} +#${SETSERIAL} /dev/cua23 ${AUTO_IRQ} autoconfig ${STD_FLAGS} + +# BocaBoard 16 port (BB-1008), (base address 0x100), +# or two BB-1008's (base addresses 0x100 and 0x140), +# or four BB-1004's (base address 0x100, 0x120, 0x140, and 0x160) +# +# Warning --- some of these ports may conflict with the Future Domain +# SCSI controller. If you want to run both the BocaBoards and the +# Future Domain controller, you may need to change the port assignment +# of the Bocaboards -- see below in the section on manual configuration. +# +${SETSERIAL} /dev/cua16 ${AUTO_IRQ} autoconfig ${STD_FLAGS} +${SETSERIAL} /dev/cua17 ${AUTO_IRQ} autoconfig ${STD_FLAGS} +${SETSERIAL} /dev/cua18 ${AUTO_IRQ} autoconfig ${STD_FLAGS} +${SETSERIAL} /dev/cua19 ${AUTO_IRQ} autoconfig ${STD_FLAGS} +${SETSERIAL} /dev/cua20 ${AUTO_IRQ} autoconfig ${STD_FLAGS} +${SETSERIAL} /dev/cua21 ${AUTO_IRQ} autoconfig ${STD_FLAGS} +${SETSERIAL} /dev/cua22 ${AUTO_IRQ} autoconfig ${STD_FLAGS} +${SETSERIAL} /dev/cua23 ${AUTO_IRQ} autoconfig ${STD_FLAGS} +${SETSERIAL} /dev/cua24 ${AUTO_IRQ} autoconfig ${STD_FLAGS} +${SETSERIAL} /dev/cua25 ${AUTO_IRQ} autoconfig ${STD_FLAGS} +${SETSERIAL} /dev/cua26 ${AUTO_IRQ} autoconfig ${STD_FLAGS} +${SETSERIAL} /dev/cua27 ${AUTO_IRQ} autoconfig ${STD_FLAGS} +${SETSERIAL} /dev/cua28 ${AUTO_IRQ} autoconfig ${STD_FLAGS} +${SETSERIAL} /dev/cua29 ${AUTO_IRQ} autoconfig ${STD_FLAGS} +${SETSERIAL} /dev/cua30 ${AUTO_IRQ} autoconfig ${STD_FLAGS} +${SETSERIAL} /dev/cua31 ${AUTO_IRQ} autoconfig ${STD_FLAGS} + +############################################################### +# +# MANUAL CONFIGURATION +# +# If you want to do manual configuration of one or more of your +# serial ports, uncomment and modify the relevant lines. +# +############################################################### + +# These are the standard COM1 through COM4 devices +# +#${SETSERIAL} /dev/cua0 uart 16450 port 0x3F8 irq 4 ${STD_FLAGS} +#${SETSERIAL} /dev/cua1 uart 16450 port 0x2F8 irq 3 ${STD_FLAGS} +#${SETSERIAL} /dev/cua2 uart 16450 port 0x3E8 irq 4 ${STD_FLAGS} +#${SETSERIAL} /dev/cua3 uart 16450 port 0x2E8 irq 3 ${STD_FLAGS} + +# These are the first set of AST Fourport ports +# +#${SETSERIAL} /dev/cua4 uart 16450 port 0x1A0 irq 9 fourport ${STD_FLAGS} +#${SETSERIAL} /dev/cua5 uart 16450 port 0x1A8 irq 9 fourport ${STD_FLAGS} +#${SETSERIAL} /dev/cua6 uart 16450 port 0x1B0 irq 9 fourport ${STD_FLAGS} +#${SETSERIAL} /dev/cua7 uart 16450 port 0x1B8 irq 9 fourport ${STD_FLAGS} + +# These are the second set of AST Fourport ports +# +#${SETSERIAL} /dev/cua8 uart 16450 port 0x2A0 irq 5 fourport ${STD_FLAGS} +#${SETSERIAL} /dev/cua9 uart 16450 port 0x2A8 irq 5 fourport ${STD_FLAGS} +#${SETSERIAL} /dev/cua10 uart 16450 port 0x2B0 irq 5 fourport ${STD_FLAGS} +#${SETSERIAL} /dev/cua11 uart 16450 port 0x2B8 irq 5 fourport ${STD_FLAGS} + +# These are the 3rd and 4th ports on the Accent Async board. +# +#${SETSERIAL} /dev/cua12 uart 16450 port 0x330 irq 4 ${STD_FLAGS} +#${SETSERIAL} /dev/cua13 uart 16450 port 0x338 irq 4 ${STD_FLAGS} + +# These are two spare devices you can use to customize for +# some board which is not supported above.... +#${SETSERIAL} /dev/cua14 uart XXXXX port XXXX irq X ${STD_FLAGS} +#${SETSERIAL} /dev/cua15 uart XXXXX port XXXX irq X ${STD_FLAGS} + +# These are the ports used for either the Usenet Serial II +# board, or the Boca Board 4, 8, or 16 port boards. +# +# Uncomment only the first 4 lines for the Usenet Serial II board, +# and uncomment the first 4, 8, or all 16 lines for the +# Boca Board BB-1004, BB-1008, and BB-2016 respectively. +# +#${SETSERIAL} /dev/cua16 uart 16550A port 0x100 irq 12 ${STD_FLAGS} +#${SETSERIAL} /dev/cua17 uart 16550A port 0x108 irq 12 ${STD_FLAGS} +#${SETSERIAL} /dev/cua18 uart 16550A port 0x110 irq 12 ${STD_FLAGS} +#${SETSERIAL} /dev/cua19 uart 16550A port 0x118 irq 12 ${STD_FLAGS} +#${SETSERIAL} /dev/cua20 uart 16550A port 0x120 irq 12 ${STD_FLAGS} +#${SETSERIAL} /dev/cua21 uart 16550A port 0x128 irq 12 ${STD_FLAGS} +#${SETSERIAL} /dev/cua22 uart 16550A port 0x130 irq 12 ${STD_FLAGS} +#${SETSERIAL} /dev/cua23 uart 16550A port 0x138 irq 12 ${STD_FLAGS} +#${SETSERIAL} /dev/cua24 uart 16550A port 0x140 irq 12 ${STD_FLAGS} +#${SETSERIAL} /dev/cua25 uart 16550A port 0x148 irq 12 ${STD_FLAGS} +#${SETSERIAL} /dev/cua26 uart 16550A port 0x150 irq 12 ${STD_FLAGS} +#${SETSERIAL} /dev/cua27 uart 16550A port 0x158 irq 12 ${STD_FLAGS} +#${SETSERIAL} /dev/cua28 uart 16550A port 0x160 irq 12 ${STD_FLAGS} +#${SETSERIAL} /dev/cua29 uart 16550A port 0x168 irq 12 ${STD_FLAGS} +#${SETSERIAL} /dev/cua30 uart 16550A port 0x170 irq 12 ${STD_FLAGS} +#${SETSERIAL} /dev/cua31 uart 16550A port 0x178 irq 12 ${STD_FLAGS} + +########################################################### +# +# Print the results of the serial configuration process +# +########################################################### + +echo "done." + +${SETSERIAL} -bg /dev/cua? /dev/cua?? |