/*
* Definitions for RTL818x hardware
*
* Copyright 2007 Michael Wu <flamingice@sourmilk.net>
* Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
*
* Modified for gPXE, June 2009, by Joshua Oreman <oremanj@rwcr.net>
*
* Based on the r8187 driver, which is:
* Copyright 2005 Andrea Merello <andreamrl@tiscali.it>, et al.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef RTL818X_H
#define RTL818X_H
#include <gpxe/spi_bit.h>
#include <gpxe/tables.h>
FILE_LICENCE(GPL2_ONLY);
struct rtl818x_csr {
u8 MAC[6];
u8 reserved_0[2];
u32 MAR[2];
u8 RX_FIFO_COUNT;
u8 reserved_1;
u8 TX_FIFO_COUNT;
u8 BQREQ;
u8 reserved_2[4];
u32 TSFT[2];
u32 TLPDA;
u32 TNPDA;
u32 THPDA;
u16 BRSR;
u8 BSSID[6];
u8 RESP_RATE;
u8 EIFS;
u8 reserved_3[1];
u8 CMD;
#define RTL818X_CMD_TX_ENABLE (1 << 2)
#define RTL818X_CMD_RX_ENABLE (1 << 3)
#define RTL818X_CMD_RESET (1 << 4)
u8 reserved_4[4];
u16 INT_MASK;
u16 INT_STATUS;
#define RTL818X_INT_RX_OK (1 << 0)
#define RTL818X_INT_RX_ERR (1 << 1)
#define RTL818X_INT_TXL_OK (1 << 2)
#define RTL818X_INT_TXL_ERR (1 << 3)
#define RTL818X_INT_RX_DU (1 << 4)
#define RTL818X_INT_RX_FO (1 << 5)
#define RTL818X_INT_TXN_OK (1 << 6)
#define RTL818X_INT_TXN_ERR (1 << 7)
#define RTL818X_INT_TXH_OK (1 << 8)
#define RTL818X_INT_TXH_ERR (1 << 9)
#define RTL818X_INT_TXB_OK (1 << 10)
#define RTL818X_INT_TXB_ERR (1 << 11)
#define RTL818X_INT_ATIM (1 << 12)
#define RTL818X_INT_BEACON (1 << 13)
#define RTL818X_INT_TIME_OUT (1 << 14)
#define RTL818X_INT_TX_FO (1 << 15)
u32 TX_CONF;
#define RTL818X_TX_CONF_LOOPBACK_MAC (1 << 17)
#define RTL818X_TX_CONF_LOOPBACK_CONT (3 << 17)
#define RTL818X_TX_CONF_NO_ICV (1 << 19)
#define RTL818X_TX_CONF_DISCW (1 << 20)
#define RTL818X_TX_CONF_SAT_HWPLCP (1 << 24)
#define RTL818X_TX_CONF_R8180_ABCD (2 << 25)
#define RTL818X_TX_CONF_R8180_F (3 << 25)
#define RTL818X_TX_CONF_R8185_ABC (4 << 25)
#define RTL818X_TX_CONF_R8185_D (5 << 25)
#define RTL818X_TX_CONF_R8187vD (5 << 25)
#define RTL818X_TX_CONF_R8187vD_B (6 << 25)
#define RTL818X_TX_CONF_HWVER_MASK (7 << 25)
#define RTL818X_TX_CONF_DISREQQSIZE (1 << 28)
#define RTL818X_TX_CONF_PROBE_DTS (1 << 29)
#define RTL818X_TX_CONF_HW_SEQNUM (1 << 30)
#define RTL818X_TX_CONF_CW_MIN (1 << 31)
u32 RX_CONF;
#define RTL818X_RX_CONF_MONITOR (1 << 0)
#define RTL818X_RX_CONF_NICMAC (1 << 1)
#define RTL818X_RX_CONF_MULTICAST (1 << 2)
#define RTL818X_RX_CONF_BROADCAST (1 << 3)
#define RTL818X_RX_CONF_FCS (1 << 5)
#define RTL818X_RX_CONF_DATA (1 << 18)
#define RTL818X_RX_CONF_CTRL (1 << 19)
#define RTL818X_RX_CONF_MGMT (1 << 20)
#define RTL818X_RX_CONF_ADDR3 (1 << 21)
#define RTL818X_RX_CONF_PM (1 << 22)
#define RTL818X_RX_CONF_BSSID (1 << 23)
#define RTL818X_RX_CONF_RX_AUTORESETPHY (1 << 28)
#define RTL818X_RX_CONF_CSDM1 (1 << 29)
#define RTL818X_RX_CONF_CSDM2 (1 << 30)
#define RTL818X_RX_CONF_ONLYERLPKT (1 << 31)
u32 INT_TIMEOUT;
u32 TBDA;
u8 EEPROM_CMD;
#define RTL818X_EEPROM_CMD_READ (1 << 0)
#define RTL818X_EEPROM_CMD_WRITE (1 << 1)
#define RTL818X_EEPROM_CMD_CK (1 << 2)
#define RTL818X_EEPROM_CMD_CS (1 << 3)
#define RTL818X_EEPROM_CMD_NORMAL (0 << 6)
#define RTL818X_EEPROM_CMD_LOAD (1 << 6)
#define RTL818X_EEPROM_CMD_PROGRAM (2 << 6)
#define RTL818X_EEPROM_CMD_CONFIG (3 << 6)
u8 CONFIG0;
u8 CONFIG1;
u8 CONFIG2;
#define RTL818X_CONFIG2_ANTENNA_DIV (1 << 6)
u32 ANAPARAM;
u8 MSR;
#define RTL818X_MSR_NO_LINK (0 << 2)
#define RTL818X_MSR_ADHOC (1 << 2)
#define RTL818X_MSR_INFRA (2 << 2)
#define RTL818X_MSR_MASTER (3 << 2)
#define RTL818X_MSR_ENEDCA (4 << 2)
u8 CONFIG3;
#define RTL818X_CONFIG3_ANAPARAM_WRITE (1 << 6)
#define RTL818X_CONFIG3_GNT_SELECT (1 << 7)
u8 CONFIG4;
#define RTL818X_CONFIG4_POWEROFF (1 << 6)
#define RTL818X_CONFIG4_VCOOFF (1 << 7)
u8 TESTR;
u8 reserved_9[2];
u8 PGSELECT;
u8 SECURITY;
u32 ANAPARAM2;
u8 reserved_10[12];
u16 BEACON_INTERVAL;
u16 ATIM_WND;
u16 BEACON_INTERVAL_TIME;
u16 ATIMTR_INTERVAL;
u8 PHY_DELAY;
u8 CARRIER_SENSE_COUNTER;
u8 reserved_11[2];
u8 PHY[4];
u16 RFPinsOutput;
u16 RFPinsEnable;
u16 RFPinsSelect;
u16 RFPinsInput;
u32 RF_PARA;
u32 RF_TIMING;
u8 GP_ENABLE;
u8 GPIO;
u8 reserved_12[2];
u32 HSSI_PARA;
u8 reserved_13[4];
u8 TX_AGC_CTL;
#define RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT (1 << 0)
#define RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT (1 << 1)
#define RTL818X_TX_AGC_CTL_FEEDBACK_ANT (1 << 2)
u8 TX_GAIN_CCK;
u8 TX_GAIN_OFDM;
u8 TX_ANTENNA;
u8 reserved_14[16];
u8 WPA_CONF;
u8 reserved_15[3];
u8 SIFS;
u8 DIFS;
u8 SLOT;
u8 reserved_16[5];
u8 CW_CONF;
#define RTL818X_CW_CONF_PERPACKET_CW_SHIFT (1 << 0)
#define RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT (1 << 1)
u8 CW_VAL;
u8 RATE_FALLBACK;
#define RTL818X_RATE_FALLBACK_ENABLE (1 << 7)
u8 ACM_CONTROL;
u8 reserved_17[24];
u8 CONFIG5;
u8 TX_DMA_POLLING;
u8 reserved_18[2];
u16 CWR;
u8 RETRY_CTR;
u8 reserved_19[3];
u16 INT_MIG;
/* RTL818X_R8187B_*: magic numbers from ioregisters */
#define RTL818X_R8187B_B 0
#define RTL818X_R8187B_D 1
#define RTL818X_R8187B_E 2
u32 RDSAR;
u16 TID_AC_MAP;
u8 reserved_20[4];
u8 ANAPARAM3;
u8 reserved_21[5];
u16 FEMR;
u8 reserved_22[4];
u16 TALLY_CNT;
u8 TALLY_SEL;
} __attribute__((packed));
#define MAX_RX_SIZE IEEE80211_MAX_FRAME_LEN
#define RF_PARAM_ANALOGPHY (1 << 0)
#define RF_PARAM_ANTBDEFAULT (1 << 1)
#define RF_PARAM_CARRIERSENSE1 (1 << 2)
#define RF_PARAM_CARRIERSENSE2 (1 << 3)
#define BB_ANTATTEN_CHAN14 0x0C
#define BB_ANTENNA_B 0x40
#define BB_HOST_BANG (1 << 30)
#define BB_HOST_BANG_EN (1 << 2)
#define BB_HOST_BANG_CLK (1 << 1)
#define BB_HOST_BANG_DATA 1
#define ANAPARAM_TXDACOFF_SHIFT 27
#define ANAPARAM_PWR0_SHIFT 28
#define ANAPARAM_PWR0_MASK (0x07 << ANAPARAM_PWR0_SHIFT)
#define ANAPARAM_PWR1_SHIFT 20
#define ANAPARAM_PWR1_MASK (0x7F << ANAPARAM_PWR1_SHIFT)
#define RTL818X_RX_RING_SIZE 8 /* doesn't have to be a power of 2 */
#define RTL818X_TX_RING_SIZE 8 /* nor this [but 2^n is very slightly faster] */
#define RTL818X_RING_ALIGN 256
#define RTL818X_MAX_RETRIES 4
enum rtl818x_tx_desc_flags {
RTL818X_TX_DESC_FLAG_NO_ENC = (1 << 15),
RTL818X_TX_DESC_FLAG_TX_OK = (1 << 15),
RTL818X_TX_DESC_FLAG_SPLCP = (1 << 16),
RTL818X_TX_DESC_FLAG_RX_UNDER = (1 << 16),
RTL818X_TX_DESC_FLAG_MOREFRAG = (1 << 17),
RTL818X_TX_DESC_FLAG_CTS = (1 << 18),
RTL818X_TX_DESC_FLAG_RTS = (1 << 23),
RTL818X_TX_DESC_FLAG_LS = (1 << 28),
RTL818X_TX_DESC_FLAG_FS = (1 << 29),
RTL818X_TX_DESC_FLAG_DMA = (1 << 30),
RTL818X_TX_DESC_FLAG_OWN = (1 << 31)
};
struct rtl818x_tx_desc {
u32 flags;
u16 rts_duration;
u16 plcp_len;
u32 tx_buf;
u32 frame_len;
u32 next_tx_desc;
u8 cw;
u8 retry_limit;
u8 agc;
u8 flags2;
u32 reserved[2];
} __attribute__ ((packed));
enum rtl818x_rx_desc_flags {
RTL818X_RX_DESC_FLAG_ICV_ERR = (1 << 12),
RTL818X_RX_DESC_FLAG_CRC32_ERR = (1 << 13),
RTL818X_RX_DESC_FLAG_PM = (1 << 14),
RTL818X_RX_DESC_FLAG_RX_ERR = (1 << 15),
RTL818X_RX_DESC_FLAG_BCAST = (1 << 16),
RTL818X_RX_DESC_FLAG_PAM = (1 << 17),
RTL818X_RX_DESC_FLAG_MCAST = (1 << 18),
RTL818X_RX_DESC_FLAG_QOS = (1 << 19), /* RTL8187(B) only */
RTL818X_RX_DESC_FLAG_TRSW = (1 << 24), /* RTL8187(B) only */
RTL818X_RX_DESC_FLAG_SPLCP = (1 << 25),
RTL818X_RX_DESC_FLAG_FOF = (1 << 26),
RTL818X_RX_DESC_FLAG_DMA_FAIL = (1 << 27),
RTL818X_RX_DESC_FLAG_LS = (1 << 28),
RTL818X_RX_DESC_FLAG_FS = (1 << 29),
RTL818X_RX_DESC_FLAG_EOR = (1 << 30),
RTL818X_RX_DESC_FLAG_OWN = (1 << 31)
};
struct rtl818x_rx_desc {
u32 flags;
u32 flags2;
union {
u32 rx_buf;
u64 tsft;
};
} __attribute__ ((packed));
struct rtl818x_priv {
struct rtl818x_csr *map;
const struct rtl818x_rf_ops *rf;
int rf_flag; /* whatever RF driver wishes to use it for */
int hw_rate;
int hw_rtscts_rate;
struct spi_bit_basher spibit;
struct spi_device eeprom;
struct rtl818x_rx_desc *rx_ring;
u32 rx_ring_dma;
unsigned int rx_idx; /* next desc to be filled by card */
struct io_buffer *rx_buf[RTL818X_RX_RING_SIZE];
struct rtl818x_tx_desc *tx_ring;
u32 tx_ring_dma;
unsigned int tx_cons; /* next desc to be filled by card */
unsigned int tx_prod; /* next desc to be filled by driver */
struct io_buffer *tx_buf[RTL818X_TX_RING_SIZE];
struct pci_device *pdev;
u32 rx_conf;
u16 txpower[14];
int r8185;
u32 anaparam;
u16 rfparam;
u8 csthreshold;
};
void rtl818x_write_phy(struct net80211_device *dev, u8 addr, u32 data);
void rtl818x_set_anaparam(struct rtl818x_priv *priv, u32 anaparam);
static inline u8 rtl818x_ioread8(struct rtl818x_priv *priv __unused, u8 *addr)
{
return inb(addr);
}
static inline u16 rtl818x_ioread16(struct rtl818x_priv *priv __unused, u16 *addr)
{
return inw(addr);
}
static inline u32 rtl818x_ioread32(struct rtl818x_priv *priv __unused, u32 *addr)
{
return inl(addr);
}
static inline void rtl818x_iowrite8(struct rtl818x_priv *priv __unused,
u8 *addr, u8 val)
{
outb(val, addr);
}
static inline void rtl818x_iowrite16(struct rtl818x_priv *priv __unused,
u16 *addr, u16 val)
{
outw(val, addr);
}
static inline void rtl818x_iowrite32(struct rtl818x_priv *priv __unused,
u32 *addr, u32 val)
{
outl(val, addr);
}
#define RTL818X_RF_DRIVERS __table(struct rtl818x_rf_ops, "rtl818x_rf_drivers")
#define __rtl818x_rf_driver __table_entry(RTL818X_RF_DRIVERS, 01)
struct rtl818x_rf_ops {
char *name;
u8 id; /* as identified in EEPROM */
void (*init)(struct net80211_device *dev);
void (*stop)(struct net80211_device *dev);
void (*set_chan)(struct net80211_device *dev, struct net80211_channel *chan);
void (*conf_erp)(struct net80211_device *dev); /* set based on dev->erp_flags */
};
#endif /* RTL818X_H */
