summaryrefslogtreecommitdiffstats
path: root/contrib/syslinux-4.02/gpxe/src/drivers/net/3c509.h
diff options
context:
space:
mode:
Diffstat (limited to 'contrib/syslinux-4.02/gpxe/src/drivers/net/3c509.h')
-rw-r--r--contrib/syslinux-4.02/gpxe/src/drivers/net/3c509.h394
1 files changed, 394 insertions, 0 deletions
diff --git a/contrib/syslinux-4.02/gpxe/src/drivers/net/3c509.h b/contrib/syslinux-4.02/gpxe/src/drivers/net/3c509.h
new file mode 100644
index 0000000..f030d4b
--- /dev/null
+++ b/contrib/syslinux-4.02/gpxe/src/drivers/net/3c509.h
@@ -0,0 +1,394 @@
+/*
+ * Copyright (c) 1993 Herb Peyerl (hpeyerl@novatel.ca) All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met: 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer. 2. The name
+ * of the author may not be used to endorse or promote products derived from
+ * this software withough specific prior written permission
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+ * EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * if_epreg.h,v 1.4 1994/11/13 10:12:37 gibbs Exp Modified by:
+ *
+ October 2, 1994
+
+ Modified by: Andres Vega Garcia
+
+ INRIA - Sophia Antipolis, France
+ e-mail: avega@sophia.inria.fr
+ finger: avega@pax.inria.fr
+
+ */
+
+FILE_LICENCE ( BSD3 );
+
+#include "nic.h"
+
+/*
+ * Ethernet software status per interface.
+ */
+/*
+ * Some global constants
+ */
+
+#define TX_INIT_RATE 16
+#define TX_INIT_MAX_RATE 64
+#define RX_INIT_LATENCY 64
+#define RX_INIT_EARLY_THRESH 64
+#define MIN_RX_EARLY_THRESHF 16 /* not less than ether_header */
+#define MIN_RX_EARLY_THRESHL 4
+
+#define EEPROMSIZE 0x40
+#define MAX_EEPROMBUSY 1000
+#define EP_ID_PORT_START 0x110 /* avoid 0x100 to avoid conflict with SB16 */
+#define EP_ID_PORT_INC 0x10
+#define EP_ID_PORT_END 0x200
+#define EP_TAG_MAX 0x7 /* must be 2^n - 1 */
+
+/*
+ * Commands to read/write EEPROM trough EEPROM command register (Window 0,
+ * Offset 0xa)
+ */
+#define EEPROM_CMD_RD 0x0080 /* Read: Address required (5 bits) */
+#define EEPROM_CMD_WR 0x0040 /* Write: Address required (5 bits) */
+#define EEPROM_CMD_ERASE 0x00c0 /* Erase: Address required (5 bits) */
+#define EEPROM_CMD_EWEN 0x0030 /* Erase/Write Enable: No data required */
+
+#define EEPROM_BUSY (1<<15)
+#define EEPROM_TST_MODE (1<<14)
+
+/*
+ * Some short functions, worth to let them be a macro
+ */
+#define is_eeprom_busy(b) (inw((b)+EP_W0_EEPROM_COMMAND)&EEPROM_BUSY)
+#define GO_WINDOW(b,x) outw(WINDOW_SELECT|(x), (b)+EP_COMMAND)
+
+/**************************************************************************
+ *
+ * These define the EEPROM data structure. They are used in the probe
+ * function to verify the existance of the adapter after having sent
+ * the ID_Sequence.
+ *
+ * There are others but only the ones we use are defined here.
+ *
+ **************************************************************************/
+
+#define EEPROM_NODE_ADDR_0 0x0 /* Word */
+#define EEPROM_NODE_ADDR_1 0x1 /* Word */
+#define EEPROM_NODE_ADDR_2 0x2 /* Word */
+#define EEPROM_PROD_ID 0x3 /* 0x9[0-f]50 */
+#define EEPROM_MFG_ID 0x7 /* 0x6d50 */
+#define EEPROM_ADDR_CFG 0x8 /* Base addr */
+#define EEPROM_RESOURCE_CFG 0x9 /* IRQ. Bits 12-15 */
+
+/**************************************************************************
+ *
+ * These are the registers for the 3Com 3c509 and their bit patterns when
+ * applicable. They have been taken out the the "EtherLink III Parallel
+ * Tasking EISA and ISA Technical Reference" "Beta Draft 10/30/92" manual
+ * from 3com.
+ *
+ * Getting this document out of 3Com is almost impossible. However,
+ * archived copies are available at
+ * http://www.osdever.net/cottontail/downloads/docs/3c5x9b.zip and
+ * several other places on the web (search for 3c5x9b.pdf).
+ *
+ **************************************************************************/
+
+#define EP_COMMAND 0x0e /* Write. BASE+0x0e is always a
+ * command reg. */
+#define EP_STATUS 0x0e /* Read. BASE+0x0e is always status
+ * reg. */
+#define EP_WINDOW 0x0f /* Read. BASE+0x0f is always window
+ * reg. */
+/*
+ * Window 0 registers. Setup.
+ */
+/* Write */
+#define EP_W0_EEPROM_DATA 0x0c
+#define EP_W0_EEPROM_COMMAND 0x0a
+#define EP_W0_RESOURCE_CFG 0x08
+#define EP_W0_ADDRESS_CFG 0x06
+#define EP_W0_CONFIG_CTRL 0x04
+/* Read */
+#define EP_W0_PRODUCT_ID 0x02
+#define EP_W0_MFG_ID 0x00
+
+/*
+ * Window 1 registers. Operating Set.
+ */
+/* Write */
+#define EP_W1_TX_PIO_WR_2 0x02
+#define EP_W1_TX_PIO_WR_1 0x00
+/* Read */
+#define EP_W1_FREE_TX 0x0c
+#define EP_W1_TX_STATUS 0x0b /* byte */
+#define EP_W1_TIMER 0x0a /* byte */
+#define EP_W1_RX_STATUS 0x08
+#define EP_W1_RX_PIO_RD_2 0x02
+#define EP_W1_RX_PIO_RD_1 0x00
+
+/*
+ * Window 2 registers. Station Address Setup/Read
+ */
+/* Read/Write */
+#define EP_W2_ADDR_5 0x05
+#define EP_W2_ADDR_4 0x04
+#define EP_W2_ADDR_3 0x03
+#define EP_W2_ADDR_2 0x02
+#define EP_W2_ADDR_1 0x01
+#define EP_W2_ADDR_0 0x00
+
+/*
+ * Window 3 registers. FIFO Management.
+ */
+/* Read */
+#define EP_W3_FREE_TX 0x0c
+#define EP_W3_FREE_RX 0x0a
+
+/*
+ * Window 4 registers. Diagnostics.
+ */
+/* Read/Write */
+#define EP_W4_MEDIA_TYPE 0x0a
+#define EP_W4_CTRLR_STATUS 0x08
+#define EP_W4_NET_DIAG 0x06
+#define EP_W4_FIFO_DIAG 0x04
+#define EP_W4_HOST_DIAG 0x02
+#define EP_W4_TX_DIAG 0x00
+
+/*
+ * Window 5 Registers. Results and Internal status.
+ */
+/* Read */
+#define EP_W5_READ_0_MASK 0x0c
+#define EP_W5_INTR_MASK 0x0a
+#define EP_W5_RX_FILTER 0x08
+#define EP_W5_RX_EARLY_THRESH 0x06
+#define EP_W5_TX_AVAIL_THRESH 0x02
+#define EP_W5_TX_START_THRESH 0x00
+
+/*
+ * Window 6 registers. Statistics.
+ */
+/* Read/Write */
+#define TX_TOTAL_OK 0x0c
+#define RX_TOTAL_OK 0x0a
+#define TX_DEFERRALS 0x08
+#define RX_FRAMES_OK 0x07
+#define TX_FRAMES_OK 0x06
+#define RX_OVERRUNS 0x05
+#define TX_COLLISIONS 0x04
+#define TX_AFTER_1_COLLISION 0x03
+#define TX_AFTER_X_COLLISIONS 0x02
+#define TX_NO_SQE 0x01
+#define TX_CD_LOST 0x00
+
+/****************************************
+ *
+ * Register definitions.
+ *
+ ****************************************/
+
+/*
+ * Command register. All windows.
+ *
+ * 16 bit register.
+ * 15-11: 5-bit code for command to be executed.
+ * 10-0: 11-bit arg if any. For commands with no args;
+ * this can be set to anything.
+ */
+#define GLOBAL_RESET (unsigned short) 0x0000 /* Wait at least 1ms
+ * after issuing */
+#define WINDOW_SELECT (unsigned short) (0x1<<11)
+#define START_TRANSCEIVER (unsigned short) (0x2<<11) /* Read ADDR_CFG reg to
+ * determine whether
+ * this is needed. If
+ * so; wait 800 uSec
+ * before using trans-
+ * ceiver. */
+#define RX_DISABLE (unsigned short) (0x3<<11) /* state disabled on
+ * power-up */
+#define RX_ENABLE (unsigned short) (0x4<<11)
+#define RX_RESET (unsigned short) (0x5<<11)
+#define RX_DISCARD_TOP_PACK (unsigned short) (0x8<<11)
+#define TX_ENABLE (unsigned short) (0x9<<11)
+#define TX_DISABLE (unsigned short) (0xa<<11)
+#define TX_RESET (unsigned short) (0xb<<11)
+#define REQ_INTR (unsigned short) (0xc<<11)
+#define SET_INTR_MASK (unsigned short) (0xe<<11)
+#define SET_RD_0_MASK (unsigned short) (0xf<<11)
+#define SET_RX_FILTER (unsigned short) (0x10<<11)
+#define FIL_INDIVIDUAL (unsigned short) (0x1)
+#define FIL_GROUP (unsigned short) (0x2)
+#define FIL_BRDCST (unsigned short) (0x4)
+#define FIL_ALL (unsigned short) (0x8)
+#define SET_RX_EARLY_THRESH (unsigned short) (0x11<<11)
+#define SET_TX_AVAIL_THRESH (unsigned short) (0x12<<11)
+#define SET_TX_START_THRESH (unsigned short) (0x13<<11)
+#define STATS_ENABLE (unsigned short) (0x15<<11)
+#define STATS_DISABLE (unsigned short) (0x16<<11)
+#define STOP_TRANSCEIVER (unsigned short) (0x17<<11)
+/*
+ * The following C_* acknowledge the various interrupts. Some of them don't
+ * do anything. See the manual.
+ */
+#define ACK_INTR (unsigned short) (0x6800)
+#define C_INTR_LATCH (unsigned short) (ACK_INTR|0x1)
+#define C_CARD_FAILURE (unsigned short) (ACK_INTR|0x2)
+#define C_TX_COMPLETE (unsigned short) (ACK_INTR|0x4)
+#define C_TX_AVAIL (unsigned short) (ACK_INTR|0x8)
+#define C_RX_COMPLETE (unsigned short) (ACK_INTR|0x10)
+#define C_RX_EARLY (unsigned short) (ACK_INTR|0x20)
+#define C_INT_RQD (unsigned short) (ACK_INTR|0x40)
+#define C_UPD_STATS (unsigned short) (ACK_INTR|0x80)
+
+/*
+ * Status register. All windows.
+ *
+ * 15-13: Window number(0-7).
+ * 12: Command_in_progress.
+ * 11: reserved.
+ * 10: reserved.
+ * 9: reserved.
+ * 8: reserved.
+ * 7: Update Statistics.
+ * 6: Interrupt Requested.
+ * 5: RX Early.
+ * 4: RX Complete.
+ * 3: TX Available.
+ * 2: TX Complete.
+ * 1: Adapter Failure.
+ * 0: Interrupt Latch.
+ */
+#define S_INTR_LATCH (unsigned short) (0x1)
+#define S_CARD_FAILURE (unsigned short) (0x2)
+#define S_TX_COMPLETE (unsigned short) (0x4)
+#define S_TX_AVAIL (unsigned short) (0x8)
+#define S_RX_COMPLETE (unsigned short) (0x10)
+#define S_RX_EARLY (unsigned short) (0x20)
+#define S_INT_RQD (unsigned short) (0x40)
+#define S_UPD_STATS (unsigned short) (0x80)
+#define S_5_INTS (S_CARD_FAILURE|S_TX_COMPLETE|\
+ S_TX_AVAIL|S_RX_COMPLETE|S_RX_EARLY)
+#define S_COMMAND_IN_PROGRESS (unsigned short) (0x1000)
+
+/*
+ * FIFO Registers.
+ * RX Status. Window 1/Port 08
+ *
+ * 15: Incomplete or FIFO empty.
+ * 14: 1: Error in RX Packet 0: Incomplete or no error.
+ * 13-11: Type of error.
+ * 1000 = Overrun.
+ * 1011 = Run Packet Error.
+ * 1100 = Alignment Error.
+ * 1101 = CRC Error.
+ * 1001 = Oversize Packet Error (>1514 bytes)
+ * 0010 = Dribble Bits.
+ * (all other error codes, no errors.)
+ *
+ * 10-0: RX Bytes (0-1514)
+ */
+#define ERR_RX_INCOMPLETE (unsigned short) (0x1<<15)
+#define ERR_RX (unsigned short) (0x1<<14)
+#define ERR_RX_OVERRUN (unsigned short) (0x8<<11)
+#define ERR_RX_RUN_PKT (unsigned short) (0xb<<11)
+#define ERR_RX_ALIGN (unsigned short) (0xc<<11)
+#define ERR_RX_CRC (unsigned short) (0xd<<11)
+#define ERR_RX_OVERSIZE (unsigned short) (0x9<<11)
+#define ERR_RX_DRIBBLE (unsigned short) (0x2<<11)
+
+/*
+ * FIFO Registers.
+ * TX Status. Window 1/Port 0B
+ *
+ * Reports the transmit status of a completed transmission. Writing this
+ * register pops the transmit completion stack.
+ *
+ * Window 1/Port 0x0b.
+ *
+ * 7: Complete
+ * 6: Interrupt on successful transmission requested.
+ * 5: Jabber Error (TP Only, TX Reset required. )
+ * 4: Underrun (TX Reset required. )
+ * 3: Maximum Collisions.
+ * 2: TX Status Overflow.
+ * 1-0: Undefined.
+ *
+ */
+#define TXS_COMPLETE 0x80
+#define TXS_SUCCES_INTR_REQ 0x40
+#define TXS_JABBER 0x20
+#define TXS_UNDERRUN 0x10
+#define TXS_MAX_COLLISION 0x8
+#define TXS_STATUS_OVERFLOW 0x4
+
+/*
+ * Configuration control register.
+ * Window 0/Port 04
+ */
+/* Read */
+#define IS_AUI (1<<13)
+#define IS_BNC (1<<12)
+#define IS_UTP (1<<9)
+/* Write */
+#define ENABLE_DRQ_IRQ 0x0001
+#define W0_P4_CMD_RESET_ADAPTER 0x4
+#define W0_P4_CMD_ENABLE_ADAPTER 0x1
+/*
+ * Media type and status.
+ * Window 4/Port 0A
+ */
+#define ENABLE_UTP 0xc0
+#define DISABLE_UTP 0x0
+
+/*
+ * Resource control register
+ */
+
+#define SET_IRQ(i) ( ((i)<<12) | 0xF00) /* set IRQ i */
+
+/*
+ * Receive status register
+ */
+
+#define RX_BYTES_MASK (unsigned short) (0x07ff)
+#define RX_ERROR 0x4000
+#define RX_INCOMPLETE 0x8000
+
+/*
+ * Misc defines for various things.
+ */
+#define MFG_ID 0x6d50 /* in EEPROM and W0 ADDR_CONFIG */
+#define PROD_ID 0x9150
+
+#define AUI 0x1
+#define BNC 0x2
+#define UTP 0x4
+
+#define RX_BYTES_MASK (unsigned short) (0x07ff)
+
+/*
+ * Function shared between 3c509.c and 3c529.c
+ */
+extern int t5x9_probe ( struct nic *nic,
+ uint16_t prod_id_check, uint16_t prod_id_mask );
+extern void t5x9_disable ( struct nic *nic );
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */