diff options
Diffstat (limited to 'contrib/syslinux-4.02/gpxe/src/include/gpxe/efi/Protocol/SimpleTextOut.h')
| -rw-r--r-- | contrib/syslinux-4.02/gpxe/src/include/gpxe/efi/Protocol/SimpleTextOut.h | 404 |
1 files changed, 404 insertions, 0 deletions
diff --git a/contrib/syslinux-4.02/gpxe/src/include/gpxe/efi/Protocol/SimpleTextOut.h b/contrib/syslinux-4.02/gpxe/src/include/gpxe/efi/Protocol/SimpleTextOut.h new file mode 100644 index 0000000..426ce81 --- /dev/null +++ b/contrib/syslinux-4.02/gpxe/src/include/gpxe/efi/Protocol/SimpleTextOut.h @@ -0,0 +1,404 @@ +/** @file + Simple Text Out protocol from the UEFI 2.0 specification. + + Abstraction of a very simple text based output device like VGA text mode or + a serial terminal. The Simple Text Out protocol instance can represent + a single hardware device or a virtual device that is an agregation + of multiple physical devices. + + Copyright (c) 2006 - 2008, Intel Corporation + All rights reserved. This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD License + which accompanies this distribution. The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +**/ + +#ifndef __SIMPLE_TEXT_OUT_H__ +#define __SIMPLE_TEXT_OUT_H__ + +#define EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL_GUID \ + { \ + 0x387477c2, 0x69c7, 0x11d2, {0x8e, 0x39, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b } \ + } + +/// +/// Protocol GUID defined in EFI1.1. +/// +#define SIMPLE_TEXT_OUTPUT_PROTOCOL EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL_GUID + +typedef struct _EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL; + +/// +/// Backward-compatible with EFI1.1. +/// +typedef EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL SIMPLE_TEXT_OUTPUT_INTERFACE; + +// +// Define's for required EFI Unicode Box Draw characters +// +#define BOXDRAW_HORIZONTAL 0x2500 +#define BOXDRAW_VERTICAL 0x2502 +#define BOXDRAW_DOWN_RIGHT 0x250c +#define BOXDRAW_DOWN_LEFT 0x2510 +#define BOXDRAW_UP_RIGHT 0x2514 +#define BOXDRAW_UP_LEFT 0x2518 +#define BOXDRAW_VERTICAL_RIGHT 0x251c +#define BOXDRAW_VERTICAL_LEFT 0x2524 +#define BOXDRAW_DOWN_HORIZONTAL 0x252c +#define BOXDRAW_UP_HORIZONTAL 0x2534 +#define BOXDRAW_VERTICAL_HORIZONTAL 0x253c +#define BOXDRAW_DOUBLE_HORIZONTAL 0x2550 +#define BOXDRAW_DOUBLE_VERTICAL 0x2551 +#define BOXDRAW_DOWN_RIGHT_DOUBLE 0x2552 +#define BOXDRAW_DOWN_DOUBLE_RIGHT 0x2553 +#define BOXDRAW_DOUBLE_DOWN_RIGHT 0x2554 +#define BOXDRAW_DOWN_LEFT_DOUBLE 0x2555 +#define BOXDRAW_DOWN_DOUBLE_LEFT 0x2556 +#define BOXDRAW_DOUBLE_DOWN_LEFT 0x2557 +#define BOXDRAW_UP_RIGHT_DOUBLE 0x2558 +#define BOXDRAW_UP_DOUBLE_RIGHT 0x2559 +#define BOXDRAW_DOUBLE_UP_RIGHT 0x255a +#define BOXDRAW_UP_LEFT_DOUBLE 0x255b +#define BOXDRAW_UP_DOUBLE_LEFT 0x255c +#define BOXDRAW_DOUBLE_UP_LEFT 0x255d +#define BOXDRAW_VERTICAL_RIGHT_DOUBLE 0x255e +#define BOXDRAW_VERTICAL_DOUBLE_RIGHT 0x255f +#define BOXDRAW_DOUBLE_VERTICAL_RIGHT 0x2560 +#define BOXDRAW_VERTICAL_LEFT_DOUBLE 0x2561 +#define BOXDRAW_VERTICAL_DOUBLE_LEFT 0x2562 +#define BOXDRAW_DOUBLE_VERTICAL_LEFT 0x2563 +#define BOXDRAW_DOWN_HORIZONTAL_DOUBLE 0x2564 +#define BOXDRAW_DOWN_DOUBLE_HORIZONTAL 0x2565 +#define BOXDRAW_DOUBLE_DOWN_HORIZONTAL 0x2566 +#define BOXDRAW_UP_HORIZONTAL_DOUBLE 0x2567 +#define BOXDRAW_UP_DOUBLE_HORIZONTAL 0x2568 +#define BOXDRAW_DOUBLE_UP_HORIZONTAL 0x2569 +#define BOXDRAW_VERTICAL_HORIZONTAL_DOUBLE 0x256a +#define BOXDRAW_VERTICAL_DOUBLE_HORIZONTAL 0x256b +#define BOXDRAW_DOUBLE_VERTICAL_HORIZONTAL 0x256c + +// +// EFI Required Block Elements Code Chart +// +#define BLOCKELEMENT_FULL_BLOCK 0x2588 +#define BLOCKELEMENT_LIGHT_SHADE 0x2591 + +// +// EFI Required Geometric Shapes Code Chart +// +#define GEOMETRICSHAPE_UP_TRIANGLE 0x25b2 +#define GEOMETRICSHAPE_RIGHT_TRIANGLE 0x25ba +#define GEOMETRICSHAPE_DOWN_TRIANGLE 0x25bc +#define GEOMETRICSHAPE_LEFT_TRIANGLE 0x25c4 + +// +// EFI Required Arrow shapes +// +#define ARROW_LEFT 0x2190 +#define ARROW_UP 0x2191 +#define ARROW_RIGHT 0x2192 +#define ARROW_DOWN 0x2193 + +// +// EFI Console Colours +// +#define EFI_BLACK 0x00 +#define EFI_BLUE 0x01 +#define EFI_GREEN 0x02 +#define EFI_CYAN (EFI_BLUE | EFI_GREEN) +#define EFI_RED 0x04 +#define EFI_MAGENTA (EFI_BLUE | EFI_RED) +#define EFI_BROWN (EFI_GREEN | EFI_RED) +#define EFI_LIGHTGRAY (EFI_BLUE | EFI_GREEN | EFI_RED) +#define EFI_BRIGHT 0x08 +#define EFI_DARKGRAY (EFI_BRIGHT) +#define EFI_LIGHTBLUE (EFI_BLUE | EFI_BRIGHT) +#define EFI_LIGHTGREEN (EFI_GREEN | EFI_BRIGHT) +#define EFI_LIGHTCYAN (EFI_CYAN | EFI_BRIGHT) +#define EFI_LIGHTRED (EFI_RED | EFI_BRIGHT) +#define EFI_LIGHTMAGENTA (EFI_MAGENTA | EFI_BRIGHT) +#define EFI_YELLOW (EFI_BROWN | EFI_BRIGHT) +#define EFI_WHITE (EFI_BLUE | EFI_GREEN | EFI_RED | EFI_BRIGHT) + +#define EFI_TEXT_ATTR(f, b) ((f) | ((b) << 4)) + +#define EFI_BACKGROUND_BLACK 0x00 +#define EFI_BACKGROUND_BLUE 0x10 +#define EFI_BACKGROUND_GREEN 0x20 +#define EFI_BACKGROUND_CYAN (EFI_BACKGROUND_BLUE | EFI_BACKGROUND_GREEN) +#define EFI_BACKGROUND_RED 0x40 +#define EFI_BACKGROUND_MAGENTA (EFI_BACKGROUND_BLUE | EFI_BACKGROUND_RED) +#define EFI_BACKGROUND_BROWN (EFI_BACKGROUND_GREEN | EFI_BACKGROUND_RED) +#define EFI_BACKGROUND_LIGHTGRAY (EFI_BACKGROUND_BLUE | EFI_BACKGROUND_GREEN | EFI_BACKGROUND_RED) + +// +// We currently define attributes from 0 - 7F for color manipulations +// To internally handle the local display characteristics for a particular character, we are defining +// Bit 7 to signify the local glyph representation for a character. If turned on, glyphs will be +// pulled from the wide glyph database and will display locally as a wide character (16 X 19 versus 8 X 19) +// If bit 7 is off, the narrow glyph database will be used. This does NOT affect information that is sent to +// non-local displays (e.g. serial or LAN consoles). +// +#define EFI_WIDE_ATTRIBUTE 0x80 + +/** + Reset the text output device hardware and optionaly run diagnostics + + @param This Protocol instance pointer. + @param ExtendedVerification Driver may perform more exhaustive verfication + operation of the device during reset. + + @retval EFI_SUCCESS The text output device was reset. + @retval EFI_DEVICE_ERROR The text output device is not functioning correctly and + could not be reset. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_TEXT_RESET)( + IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This, + IN BOOLEAN ExtendedVerification + ); + +/** + Write a Unicode string to the output device. + + @param This Protocol instance pointer. + @param String The NULL-terminated Unicode string to be displayed on the output + device(s). All output devices must also support the Unicode + drawing defined in this file. + + @retval EFI_SUCCESS The string was output to the device. + @retval EFI_DEVICE_ERROR The device reported an error while attempting to output + the text. + @retval EFI_UNSUPPORTED The output device's mode is not currently in a + defined text mode. + @retval EFI_WARN_UNKNOWN_GLYPH This warning code indicates that some of the + characters in the Unicode string could not be + rendered and were skipped. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_TEXT_STRING)( + IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This, + IN CHAR16 *String + ); + +/** + Verifies that all characters in a Unicode string can be output to the + target device. + + @param This Protocol instance pointer. + @param String The NULL-terminated Unicode string to be examined for the output + device(s). + + @retval EFI_SUCCESS The device(s) are capable of rendering the output string. + @retval EFI_UNSUPPORTED Some of the characters in the Unicode string cannot be + rendered by one or more of the output devices mapped + by the EFI handle. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_TEXT_TEST_STRING)( + IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This, + IN CHAR16 *String + ); + +/** + Returns information for an available text mode that the output device(s) + supports. + + @param This Protocol instance pointer. + @param ModeNumber The mode number to return information on. + @param Columns Returns the geometry of the text output device for the + requested ModeNumber. + @param Rows Returns the geometry of the text output device for the + requested ModeNumber. + + @retval EFI_SUCCESS The requested mode information was returned. + @retval EFI_DEVICE_ERROR The device had an error and could not complete the request. + @retval EFI_UNSUPPORTED The mode number was not valid. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_TEXT_QUERY_MODE)( + IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This, + IN UINTN ModeNumber, + OUT UINTN *Columns, + OUT UINTN *Rows + ); + +/** + Sets the output device(s) to a specified mode. + + @param This Protocol instance pointer. + @param ModeNumber The mode number to set. + + @retval EFI_SUCCESS The requested text mode was set. + @retval EFI_DEVICE_ERROR The device had an error and could not complete the request. + @retval EFI_UNSUPPORTED The mode number was not valid. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_TEXT_SET_MODE)( + IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This, + IN UINTN ModeNumber + ); + +/** + Sets the background and foreground colors for the OutputString () and + ClearScreen () functions. + + @param This Protocol instance pointer. + @param Attribute The attribute to set. Bits 0..3 are the foreground color, and + bits 4..6 are the background color. All other bits are undefined + and must be zero. The valid Attributes are defined in this file. + + @retval EFI_SUCCESS The attribute was set. + @retval EFI_DEVICE_ ERROR The device had an error and could not complete the request. + @retval EFI_UNSUPPORTED The attribute requested is not defined. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_TEXT_SET_ATTRIBUTE)( + IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This, + IN UINTN Attribute + ); + +/** + Clears the output device(s) display to the currently selected background + color. + + @param This Protocol instance pointer. + + @retval EFI_SUCCESS The operation completed successfully. + @retval EFI_DEVICE_ERROR The device had an error and could not complete the request. + @retval EFI_UNSUPPORTED The output device is not in a valid text mode. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_TEXT_CLEAR_SCREEN)( + IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This + ); + +/** + Sets the current coordinates of the cursor position + + @param This Protocol instance pointer. + @param Column The position to set the cursor to. Must be greater than or + equal to zero and less than the number of columns and rows + by QueryMode (). + @param Row The position to set the cursor to. Must be greater than or + equal to zero and less than the number of columns and rows + by QueryMode (). + + @retval EFI_SUCCESS The operation completed successfully. + @retval EFI_DEVICE_ERROR The device had an error and could not complete the request. + @retval EFI_UNSUPPORTED The output device is not in a valid text mode, or the + cursor position is invalid for the current mode. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_TEXT_SET_CURSOR_POSITION)( + IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This, + IN UINTN Column, + IN UINTN Row + ); + +/** + Makes the cursor visible or invisible + + @param This Protocol instance pointer. + @param Visible If TRUE, the cursor is set to be visible. If FALSE, the cursor is + set to be invisible. + + @retval EFI_SUCCESS The operation completed successfully. + @retval EFI_DEVICE_ERROR The device had an error and could not complete the + request, or the device does not support changing + the cursor mode. + @retval EFI_UNSUPPORTED The output device is not in a valid text mode. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_TEXT_ENABLE_CURSOR)( + IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This, + IN BOOLEAN Visible + ); + +/** + @par Data Structure Description: + Mode Structure pointed to by Simple Text Out protocol. + + @param MaxMode + The number of modes supported by QueryMode () and SetMode (). + + @param Mode + The text mode of the output device(s). + + @param Attribute + The current character output attribute + + @param CursorColumn + The cursor's column. + + @param CursorRow + The cursor's row. + + @param CursorVisible + The cursor is currently visbile or not. + +**/ +typedef struct { + INT32 MaxMode; + + // + // current settings + // + INT32 Mode; + INT32 Attribute; + INT32 CursorColumn; + INT32 CursorRow; + BOOLEAN CursorVisible; +} EFI_SIMPLE_TEXT_OUTPUT_MODE; + +/// +/// The SIMPLE_TEXT_OUTPUT protocol is used to control text-based output devices. +/// It is the minimum required protocol for any handle supplied as the ConsoleOut +/// or StandardError device. In addition, the minimum supported text mode of such +/// devices is at least 80 x 25 characters. +/// +struct _EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL { + EFI_TEXT_RESET Reset; + + EFI_TEXT_STRING OutputString; + EFI_TEXT_TEST_STRING TestString; + + EFI_TEXT_QUERY_MODE QueryMode; + EFI_TEXT_SET_MODE SetMode; + EFI_TEXT_SET_ATTRIBUTE SetAttribute; + + EFI_TEXT_CLEAR_SCREEN ClearScreen; + EFI_TEXT_SET_CURSOR_POSITION SetCursorPosition; + EFI_TEXT_ENABLE_CURSOR EnableCursor; + + /// + /// Pointer to SIMPLE_TEXT_OUTPUT_MODE data. + /// + EFI_SIMPLE_TEXT_OUTPUT_MODE *Mode; +}; + +extern EFI_GUID gEfiSimpleTextOutProtocolGuid; + +#endif |