diff options
Diffstat (limited to 'initramfs/eglibc-rootfs/etc/functions')
| -rw-r--r-- | initramfs/eglibc-rootfs/etc/functions | 1029 |
1 files changed, 1029 insertions, 0 deletions
diff --git a/initramfs/eglibc-rootfs/etc/functions b/initramfs/eglibc-rootfs/etc/functions new file mode 100644 index 0000000..3985bd5 --- /dev/null +++ b/initramfs/eglibc-rootfs/etc/functions @@ -0,0 +1,1029 @@ +# Copyright (c) 2003..2006 - RZ Uni Freiburg +# Copyright (c) 2006..2009 - OpenSLX GmbH +# +# This program/file is free software distributed under the GPL version 2. +# See http://openslx.org/COPYING +# +# If you have any feedback please consult http://openslx.org/feedback and +# send your feedback to feedback@openslx.org +# +# General information about OpenSLX can be found at http://openslx.org +# +# Common functions file for the configuration of linux diskless clients +# (included by init, hwautocfg, servconfig, ... within OpenSLX initialramfs) + +############################################################################# +# set of empty dummy functions (loaded before real functions in the +# distro specific files - to have no undeclared function in init, serv- +# config, hwautocfg, ...) + +# distro specific funtion called at the beginning of init script +preinit () { +: +} +# distro specific funtion called at the end of init script +postinit () { +: +} +# distro specific general function called from servconfig script +config_distro () { +: +} + +############################################################################# +# produce error message and if $2 is empty run (debug) shell +error () { +local e_msg="$1" +# set LOGFILE if not defined +[ -z "${LOGFILE}" ] && LOGFILE="/dev/null" +# if nonfatal error else fatal error message and shell +if [ -n "$2" ] ; then + [ "$DEBUGLEVEL" -ge 1 -a "$DEBUGLEVEL" != 8 ] && \ + echo -e "${error_msg}${e_msg}${error_nfe}" >> ${LOGFILE} + [ "$DEBUGLEVEL" -gt 1 -a "$DEBUGLEVEL" != 8 ] && \ + echo -e "${error_msg}${e_msg}${error_nfe}" + [ "$DEBUGLEVEL" -gt 2 -a "$DEBUGLEVEL" != 8 ] && usleep 10 +else + echo -e "${error_msg}${e_msg}${error_shell}" + /bin/sh + echo -n "Reboot now? [y] (nothing happens here at the moment)" + exec < /dev/console > /dev/console + #input="y" + #read input + #[ -z "$input" -o "$input" = "y" -o "$input" = "Y" ] && { + # sleep 4 + # [ -f /proc/sysrq-trigger ] || mount -t proc none /proc + # echo "b" > /proc/sysrq-trigger + #} +fi +} +############################################################################# +# system uptime for performance analysis +sysup () { +uptime=$(sed -e "s, .*,," /proc/uptime) +echo "${uptime} s." +# if start times are kept, a summary of runtimes would be possible too +} +############################################################################# +# (re)generate dynamic linked libraries cache from /etc/ld.so.conf +ldcfg () { +[ -n "${ldsc}" ] && echo -e "$init_ldcfg" && ldconfig /tmp/ld.so.cache & +} +############################################################################# +# URI interpreter $1 variable to interprete, $2 type of token to return +# prot: tftp, http, nbd, ... server: IP or FQDN +uri_token () { +local var=$1 +local prot +local rest +local server +local path +local port +local tmpval +local query="" +# first check if URI starts with prot:// - URI scheme +if strinstr "://" "$1" ; then + prot=${var%://*} + rest=${var#*://} +else + rest="$var" + prot="" +fi +# remove temporary '::' from path, since it conflicts with port specification +# ticket #232 +if strinstr "::" "$rest" ; then + rest=$(echo $rest | sed -e 's,::,§§§§§,g') +elif strinstr "\:\:" "$rest" ; then + rest=$(echo $rest | sed -e 's,\:\:,§§§§§,g') +fi +# get the server IP or name and port - URI authority +# you get the path or other token without leading "/" - add it later if +# needed (fixme: port might be broken) +if strinstr ":" "$rest" ; then + server="${rest%:*}" + rest="${rest#*:}" + path="${rest#*/}" + port="${rest%/$path}" +else + tmpval=$rest + rest="${rest#*/}" + server="$(echo $tmpval|sed 's,/.*,,')" + path="${tmpval#${server}}" + port="" +fi +# get path and query components - URI path, query +if strinstr "\?" "$rest" ; then + path="${path%\?*}" + query="${rest#*\?}" +fi +# return the requested token +case "$2" in + prot) echo "$prot" ;; + server) echo "$server" ;; + # add '::' again to path, remove duplicate "//" + path) echo "$path" | sed -e 's,§§§§§,\:\:,g;s,//,/,' ;; + port) echo "$port" ;; + query) echo "$query" ;; +esac +} +############################################################################# +# mounter for different file sources +fsmount () { +local proto=$1 +local server=$2 +local srcpath=$3 +local target=$4 +local mntopt=$5 +local transport +testmkd ${target} +case "${proto}" in + *nbd) + # TODO: to be filled in ... + ;; + lbdev) + # we expect the stuff on toplevel directory, filesystem type should be + # autodetected here ... (vmimgserv is blockdev here) + vmbdev=/dev/${server} + waitfor ${vmbdev} 20000 + mount -o ro ${vmbdev} ${target} || error "$scfg_evmlm" nonfatal + ;; + nfs) + # we expect nfs mounts here ... check that nfs module is loaded before + cat /proc/filesystems | grep -q -E "[[:space:]]nfs" || \ + { modprobe ${MODPRV} nfs 2>/dev/null || error "$error_nfsmod" nonfatal; } + for transport in tcp udp fail; do + [ $transport = "fail" ] && { error "$init_nfs" nonfatal; + noimg=yes; break;} + mount -n -t nfs -o ${mntopt},nolock,${transport} \ + ${server}:${srcpath} ${target} && break + done + ;; + smb|cifs) + # cifs mounts might be problematic if accessed with superuser id + mount -n -o ${mntopt},user=guest,guest,file_mode=0755,dir_mode=0755 \ + -t ${proto} //${server}${srcpath} ${target} + #d_mkrlscript entry boot.slx "/opt/openslx/uclib-rootfs/bin/mount -n \ + #-o ${mntopt},guest,user=guest,file_mode=0755,dir_mode=0755 -t ${proto} \ + #//${server}${srcpath} ${target#/mnt}" + ;; +esac +} +############################################################################# +# replace @@@serverip@@@ with real serverip. Allows the usage of a variable +# for the server ip address (e.g. in machine-setup or kernel commandline) +checkip () +{ +if [ "@@@serverip@@@" = "$1" -a -n "$serverip" ] ; then + echo $serverip +else + echo $1 +fi +} +############################################################################# +# replacement for which command to find executables inside stage4 rootfs +binfinder() +{ +local program="$1" +local s4path +local notfound=1 +for s4path in bin sbin usr/bin usr/sbin usr/local/bin \ + usr/local/sbin usr/bin/X11; do + if [ -f "/mnt/$s4path/$program" ] && \ + [ -x "/mnt/$s4path/$program" ]; then + printf '%s\n' "/$s4path/$program" + notfound=0 + break + fi +done +return $notfound +} +############################################################################# +# disk formatter and mounter. some proper error message output should be +# added. It uses programs invoked from stage 4 root filesystem. First +# argument is blockdev or file to be formatted, second mountpoint if not +# /mnt/tmp (default) +diskfm () { +local target=$1 +local mntpnt=$2 +local fs +local path +[ -f /lib/ld-linux.so.2 ] || ln -s /mnt/lib/ld-linux.so.2 /lib/ld-linux.so.2 +for fs in xfs reiserfs ext2 ; do + if strinfile "$fs" /proc/filesystems || modprobe ${MODPRV} $fs ; then + unset $found + for path in /sbin /bin /usr/sbin /usr/bin ; do + if test -x /mnt/$path/mkfs.$fs ; then + found=yes + case mkfs.$fs in + mkfs.xfs) + fopt="-f" + mopt="-o noexec" + ;; + mkfs.ext2) + fopt="-Fq" + mopt="-o nocheck,noexec" + ;; + mkfs.reiserfs) + fopt="-f" + mopt="-o noexec" + ;; + esac + LD_LIBRARY_PATH=/mnt/lib /mnt/$path/mkfs.$fs $fopt $target \ + >/dev/null 2>&1 #|| error + if [ -z $mntpnt ] ; then + umount /mnt/tmp 2>/dev/null + if mount -t $fs -n $mopt $target /mnt/tmp 2>/dev/null; then + return 0 + else + mount -n -t tmpfs none /mnt/tmp + fi + else + testmkd $mntpnt + mount -t $fs -n -o loop $target $mntpnt 2>/dev/null + return 0 + fi + fi + done + [ -z $found ] && continue + else break + fi +done +} + +############################################################################# +# dhcp client function +rundhcp () +{ +local vci="$1" +# ensure the interface is up - might produce conflicts - nbd could fail!! +# fixme: really needed? +# [ -n "$noipyet" ] && ip link set dev $nwif up +[ -f /lib/modules/${KERNEL}/kernel/net/packet/af_packet.ko ] && \ + modprobe ${MODPRV} af_packet +echo "Starting udhcpc for IP configuration" +mkdir /var/lib/dhcp >/dev/null 2>&1 +[ -n $vci ] && vci="-V $vci" +testmkd /usr/share/udhcpc +ln -sf /bin/dhcpmkconfig /usr/share/udhcpc/default.script +# see for options.c file in udhcp subdir of busybox for accepted "-O option" +udhcpc -O nissrv -O nisdomain -t 8 -q $vci \ + -s /usr/share/udhcpc/default.script -i $nwif 2>/dev/null +} + +############################################################################# +# function for retrieving configuration file (machine-setup) via tftp from a +# predefined server or given source (file=tftp-server:/path via kernel +# command line) +unpack () { +# $1 is config file name to get, $2 IP of server to get file from +local dst=$1 +if [ -s $dst ] ; then + # fixme: handle different types of packaging (gzip/bzip2)?? + if ! tar -xpzf $dst 2> /tmp/ConfTGZ-tar-error ; then + cat /tmp/ConfTGZ-tar-error + error "$unpack_ConfTGZ" nonfatal + rm /tmp/ConfTGZ-tar-error + fi + [ "$DEBUGLEVEL" -le 2 -o "$DEBUGLEVEL" -eq 8 ] && rm $dst + return 0 +else + return 1 +fi +} + +# tftp wrapper +# usage tftp_get <path> <tftpdserver> [count] +# count is optional - default is 3 - use -1 for indefinit +tftp_get () { + local file="$1" + local file_server="$2" + local download_successful=0 + local countdown="$3" + + if [ -z "$1" -o -z "$2" ]; then + [ $DEBUGLEVEL -ge 1 ] && \ + echo "[tftp_get] Usage: tftp_get <path> <server> [count]" + return 1; + fi + + [ "$countdown" = "" ] && countdown=3 + + until [ $download_successful -eq 1 ] + do + if [ "$countdown" = "0" ]; then + [ $DEBUGLEVEL -ge 1 ] && \ + echo "[tftp_get] download of \"$file\" from \"$file_server\" ... failed" + return 0; + fi + tftp -g -r $file -l /tmp/$(basename $file) $file_server + [ -s /tmp/$(basename $file) ] && download_successful=1 + countdown=$(expr $countdown - 1) + usleep 200000 + done + [ $DEBUGLEVEL -ge 1 ] && \ + echo "[tftp_get] download of \"$file\" from \"$file_server\" ... successful" + return 0; +} + + +# wget wrapper +# usage wget_get <path> <ftp/httpserver> [count] +# count is optional - default is 3 - use -1 for indefinit +wget_get () { + local file="$1" + local file_server="$2" + local download_successful=0 + local countdown="$3" + + if [ -z "$1" -o -z "$2" ]; then + [ $DEBUGLEVEL -ge 1 ] && \ + echo "[wget_get] Usage: wget_get <path> <server> [count]" + return 1; + fi + + [ "$countdown" = "" ] && countdown=3 + + until [ $download_successful -eq 1 ] + do + if [ "$countdown" = "0" ]; then + [ $DEBUGLEVEL -ge 1 ] && \ + echo "[wget_get] download of \"$file\" from \"$file_server\" ... failed" + return 0; + fi + wget -q $file_server$file -O /tmp/$(basename $file) + [ -s /tmp/$(basename $file) ] && download_successful=1 + countdown=$(expr $countdown - 1) + usleep 200000 + done + [ $DEBUGLEVEL -ge 1 ] && \ + echo "[wget_get] download of \"$file\" from \"$file_server\" ... successful" + return 0; +} + + +fileget () { +# normally tftp would be used, alternatively use wget for ftp or http +# if local device file is specified - mount and unmount after copying +local cfgfile +[ "x$fileprot" = "x" ] && fileprot=tftp +if [ "x$filepath" != "x" ] ; then + cfgfile=${filepath} + [ "x$fileserv" = "x" ] && fileserv=$(checkip ${serverip}) + # wait for dns if "fileserv" is a name and not lbd device + [ "$fileprot" != "lbd" ] && \ + echo ${fileserv} | grep -qi [a-z] && waitfor /tmp/dhcp-done 10000 + [ $DEBUGLEVEL -ge 1 ] && echo "fileget - fileprot:$fileprot, filepath:\ +$filepath, fileserv:$fileserv" >>$LOGFILE + case "$fileprot" in + ftp|http) + wget_get $cfgfile $fileprot://$fileserv \ + && { unpack /tmp/$(basename $cfgfile) && break; } 2>>$LOGFILE + ;; + lbd) + local ldev=$fileserv + echo "Waiting for configuration file ${cfgfile} ...." + [ $DEBUGLEVEL -ge 1 ] && echo "fileget - fileprot:$fileprot, filepath:\ +$filepath, fileserv:$fileserv" >>$LOGFILE + waitfor /mnt/${cfgfile} 10000 + if [ -f /mnt/${cfgfile} ]; then + unpack /mnt/$cfgfile + else + error "$init_errlfg" + fi + ;; + *) + tftp_get $cfgfile $fileserv \ + && unpack /tmp/$(basename $cfgfile) 2>>$LOGFILE + ;; + esac +else + # predefined value for OpenSLX environment; it is expected that this + # directory is just below the tftpboot (path to which the daemon is + # restricted to) + filepath="client-config" + [ "x$fileserv" = "x" ] && fileserv=$(checkip ${serverip}) + [ $DEBUGLEVEL -ge 1 ] && echo "fileget - fileprot:$fileprot, filepath:\ +$filepath, fileserv:$fileserv" >>$LOGFILE + # try to get configuration files successively; start with distro client + # and try last distro default ... + mac=$(echo $macaddr|sed "s/:/-/g") + for cfgfile in ${filepath}/${SYSTEM_NAME}/01-$mac.tgz \ + ${filepath}/${SYSTEM_NAME}/default.tgz ; do + case "$fileprot" in + ftp|http) + wget $fileprot://$fileserv/$cfgfile -O /tmp/$(basename $cfgfile) \ + 2>>$LOGFILE && { unpack /tmp/$(basename $cfgfile) && break; } + ;; + tftp) + tftp_get $cfgfile $fileserv \ + 2>>$LOGFILE && { unpack /tmp/$(basename $cfgfile) && break; } + ;; + esac + done + echo -e "\n## Configuration via fileget from ${fileprot}://${fileserv}/\ +${cfgfile}\n# Hierarchy is distro client and as last distro/default" \ + >>/tmp/confviafile +fi +cat /initramfs/machine-setup >>/tmp/confviafile 2>/dev/null || \ + error "$nomachsetup" +echo "fileget via $fileprot from $fileserv/$cfgfile finished" >/tmp/file-done +[ $DEBUGLEVEL -ge 1 ] && echo "fileget from $cfgfile finished" >>$LOGFILE +} + +############################################################################# +# function for creating directories after testing of their existance avoids +# to recreate directories in union mounts. If second and/or third parameters +# are given check for permission patterns +testmkd () { + test -d $1 || mkdir -p $1 >/dev/null 2>&1 + [ $# -ge 2 ] && for i in "$2" "$3" ; do + echo "$i" | grep -q -E "^[0-9]{3,4}$" && chmod "$i" $1 >/dev/null 2>&1 + echo "$i" | grep -q -E ":." && chown "$i" $1 >/dev/null 2>&1 + done +} + +############################################################################# +# function for writing a syslog-ng.conf file. First parameter is absolute +# destination (incl. /mnt prefix) +# sysngwriter $dest $start_syslog +sysngwriter () { +local mysyslogngcfg=$1 +# logging servers might be specified in $log_servers (from e.g. dhcp) +# fixme!? only first logserver from dhcp variable is used +[ -n "$log_servers" ] && start_syslog="syslog://${log_servers% *}:514/udp" +echo -e "# File written by $0 within InitRamFS\n\ +source src {\n\tfile(\"/proc/kmsg\");\n\ +\tunix-dgram(\"/dev/log\");\n\tinternal();\n};\ndestination console_all {\ +\n\tfile(\"/dev/tty10\");\n};" >$mysyslogngcfg +case "$start_syslog" in + yes|Yes|YES) + echo -e "\nlog {\n\tsource(src);\n\tdestination(console_all);\n};" \ + >>$mysyslogngcfg + ;; + file) + echo -e "destination allmessages {\n\tfile(\"/var/log/allmessages\");\n};\ +\nlog {\n\tsource(src); destination(allmessages);\n};" >>$mysyslogngcfg + ;; + *) + syslogsrv=$(uri_token $start_syslog server) + syslogport=$(uri_token $start_syslog port) + syslogprot=$(uri_token $start_syslog path) + [ -z ${syslogport} ] && syslogport=514 + [ -z ${syslogprot} ] && syslogprot=udp + echo -e "destination loghost {\n\t${syslogprot}(\"${syslogsrv}\" \ +port(${syslogport}));\n};\nlog {\n\tsource(src);\n\tdestination(loghost);\n};"\ + >>$mysyslogngcfg + ;; +esac +} + +############################################################################# +# simple string in string search +strinstr () { + case "$2" in *$1*) return 0;; esac + return 1 +} + +############################################################################# +# simple string in file search, for the future grep should be used instead +strinfile () { + case "$(cat $2)" in *$1*) return 0;; esac + return 1 +} + +############################################################################# +# wait for a file to appear and stop after maxwait counts +waitfor () { +local file=$1 +local maxwait=$2 +local count=0 +[ -z $file ] && return 0 +[ -z $maxwait ] && maxwait=5000 +while [ ! -e $file ] ; do + usleep 1000 + count=$(($count + 1)) + [ $count -gt $maxwait ] && return 1 +done +return 0 +} + +############################################################################# +# ldconfig is needed if rootfilesystem is composed of several parts. Search +# for ldconfig and execute it (we expect ldconfig not to be a dynamically +# linked tool) +# check that /mnt/etc/ld.so.conf is never lost +ldconfig () { +local cachefile="$1" +for ldcfg in /mnt/sbin/ldconfig \ + /mnt/bin/ldconfig \ + /mnt/usr/sbin/ldconfig; do + test -x $ldcfg && { + $ldcfg -r /mnt -C $cachefile; break; } +done +echo "finished at $(sysup)" >/tmp/ldcfg +} + +############################################################################# +# base passwd/shadow, the standard user present in every system. All other +# system users should be generated within the service function +basepasswd () { +# hack (see Ticket #206) +root_pw="$1" +# strip every line with userid between 500 and 99999 from the passwd +# file +sed '/^[a-zA-Z0-9]*:[a-zA-Z0-9]*:[1-9][0-9]\{3,4\}:/d;/^+:*/d;/^+$/d; + /^[a-zA-Z0-9]*:[a-zA-Z0-9]*:[5-9][0-9]\{2\}:/d' /mnt/etc/passwd \ + >/tmp/newpasswd +# and add user nobody again (is there a more elegant way?) +sed -n -e '/nobody/p' /mnt/etc/passwd >>/tmp/newpasswd +# create the shadow from passwd file +echo -e "root:"${root_pw}":12958:0:10000::::" >/mnt/etc/shadow +sed 's/:.*/:!:13078:0:99999:7:::/;/^root.*/d' /tmp/newpasswd \ + >>/mnt/etc/shadow +mv /tmp/newpasswd /mnt/etc/passwd +chmod 0640 /mnt/etc/shadow +} + +############################################################################# +# wait for the completion of configuration file (machine-setup). It is +# composed from different sources +cfgcomplete () { +waitfor /tmp/dhcp-done 10000 || error "$error_errdcfg" nonfatal +waitfor /tmp/file-done 10000 || error "$error_errfcfg" nonfatal +waitfor /tmp/ldap-done 10000 || error "$error_errlcfg" nonfatal +# concatenate the different files now into the central config file, order +# matters - ldap (not implemented yet) data has highest priority +if ! test -f /tmp/cfgcomplete ; then + echo "## Stage3 configuration via initial/early /etc/initramfs-setup" \ + >/etc/ext-initramfs-setup + for config in /etc/initramfs-setup /tmp/confviadhcp /tmp/confviafile \ + /tmp/confvialdap + do test -f $config && cat $config >>/etc/ext-initramfs-setup + done +# check again and replace @@@serverip@@@ and produce a final version for +# stage4 (no much use, just debugging) +sed "s,@@@serverip@@@,$serverip," -i /etc/ext-initramfs-setup +. /etc/ext-initramfs-setup +cp /etc/ext-initramfs-setup /mnt/etc/machine-setup +mv /etc/ext-initramfs-setup /etc/initramfs-setup +echo "config completed" >/tmp/cfgcomplete +fi +} + +############################################################################# +# execute all shell scripts in the given init-hook folder +runinithook () { +local hook=$1 +if [ -d /etc/init-hooks/$hook ]; then + for hook_script in /etc/init-hooks/$hook/*.sh; do + if [ -e $hook_script ]; then + /bin/init-wrapper $hook_script $DEBUGLEVEL + . /tmp/env/wrapper.env + fi + done +fi +} + +############################################################################# +# localization simply derived from $language variable set in machine-setup or +# other sources - mostly taken from knoppix +localization () { +country="$1" +CONSOLE_FONT="lat9w-16.psfu" +case "$country" in + # German version + de*) + COUNTRY="de" + LANG="de_DE.UTF-8" + KEYTABLE="de-latin1-nodeadkeys" + XKEYBOARD="de" + KDEKEYBOARD="de" + CHARSET="utf8" + KDEKEYBOARDS="us,fr" + TZ="Europe/Berlin" + ;; + # Belgian version + be*) + COUNTRY="be" + LANG="C" + KEYTABLE="be2-latin1" + XKEYBOARD="be" + KDEKEYBOARD="be" + CHARSET="iso8859-15" + KDEKEYBOARDS="us,de,fr" + TZ="Europe/Brussels" + ;; + # Bulgarian version + bg*) + COUNTRY="bg" + LANG="bg_BG" + KEYTABLE="bg" + XKEYBOARD="bg" + KDEKEYBOARD="bg" + CHARSET="microsoft-cp1251" + KDEKEYBOARDS="us,de,fr" + TZ="Europe/Sofia" + ;; + # Switzerland (basically de with some modifications) + ch) + LANGUAGE="de" + COUNTRY="ch" + LANG="de_CH" + KEYTABLE="sg-latin1" + XKEYBOARD="de_CH" + KDEKEYBOARD="de_CH" + CHARSET="iso8859-15" + KDEKEYBOARDS="de,us,fr" + TZ="Europe/Zurich" + ;; + # Simplified Chinese + cn) + COUNTRY="cn" + LANG="zh_CN.GB2312" + KEYTABLE="us" + XKEYBOARD="us" + KDEKEYBOARD="us" + CHARSET="gb2312.1980-0" + KDEKEYBOARDS="us,de,fr" + XMODIFIERS="@im=Chinput" + TZ="Asia/Shanghai" + ;; + # Czechoslovakia + cs|cz) + LANGUAGE="cs" + COUNTRY="cs" + LANG="cs_CZ.UTF-8" + KEYTABLE="cz-lat2" + XKEYBOARD="cs" + KDEKEYBOARD="cz" + CHARSET="iso8859-2" + KDEKEYBOARDS="us,de,fr" + TZ="Europe/Prague" + CONSOLE_FONT="iso02g" + ;; + # Denmark + dk|da) + COUNTRY="dk" + LANG="da_DK.UTF-8" + # Workaround: "dk" broken in gettext, use da:da_DK + LANGUAGE="da:da_DK" + KEYTABLE="dk" + XKEYBOARD="dk" + KDEKEYBOARD="dk" + CHARSET="iso8859-15" + KDEKEYBOARDS="dk,de,us,fr" + TZ="Europe/Copenhagen" + ;; + es) + # Spain + COUNTRY="es.UTF-8" + LANG="es_ES" + KEYTABLE="es" + XKEYBOARD="es" + KDEKEYBOARD="es" + CHARSET="iso8859-15" + KDEKEYBOARDS="de,us,fr" + TZ="Europe/Madrid" + ;; + # Finland + fi) + COUNTRY="fi" + LANG="fi_FI.UTF-8" + KEYTABLE="fi" + XKEYBOARD="fi" + KDEKEYBOARD="fi" + CHARSET="iso8859-15" + KDEKEYBOARDS="us" + TZ="Europe/Helsinki" + ;; + # France + fr*) + COUNTRY="fr" + LANG="fr_FR.UTF-8" + KEYTABLE="fr" + XKEYBOARD="fr" + KDEKEYBOARD="fr" + CHARSET="iso8859-15" + KDEKEYBOARDS="de,us" + TZ="Europe/Paris" + ;; + he|il) + # Hebrew version + LANGUAGE="he" + COUNTRY="il" + LANG="he_IL.UTF-8" + KEYTABLE="us" + XKEYBOARD="us" + KDEKEYBOARD="il" + CHARSET="iso8859-8" + KDEKEYBOARDS="us,fr,de" + TZ="Asia/Jerusalem" + ;; + # Ireland + ie) + COUNTRY="ie" + LANG="en_IE.UTF-8" + KEYTABLE="uk" + XKEYBOARD="uk" + KDEKEYBOARD="gb" + CHARSET="iso8859-15" + KDEKEYBOARDS="us,de,es,fr,it" + TZ="Europe/Dublin" + ;; + # Italy + it) + COUNTRY="it" + LANG="it_IT.UTF-8" + KEYTABLE="it" + XKEYBOARD="it" + KDEKEYBOARD="it" + CHARSET="iso8859-15" + KDEKEYBOARDS="fr,us,de" + TZ="Europe/Rome" + ;; + # Japan + ja) + COUNTRY="jp" + LANG="ja_JP.UTF-8" + LANGUAGE="ja" + KEYTABLE="us" + XKEYBOARD="us" + KDEKEYBOARD="us" + CHARSET="iso8859-15" + KDEKEYBOARDS="fr,us,de" + TZ="Asia/Tokyo" + ;; + # The Netherlands + nl) + COUNTRY="nl" + LANG="nl_NL.UTF-8" + KEYTABLE="us" + XKEYBOARD="us" + KDEKEYBOARD="en_US" + CHARSET="iso8859-15" + KDEKEYBOARDS="nl,de,fr" + TZ="Europe/Amsterdam" + ;; + # Poland + pl) + COUNTRY="pl" + LANG="pl_PL.UTF-8" + KEYTABLE="pl" + XKEYBOARD="pl" + KDEKEYBOARD="pl" + CHARSET="iso8859-2" + KDEKEYBOARDS="de,us,fr" + TZ="Europe/Warsaw" + CONSOLE_FONT="iso02g" + ;; + # Russia + ru) + COUNTRY="ru" + LANG="ru_RU.UTF-8" + KEYTABLE="ru" + XKEYBOARD="ru" + KDEKEYBOARD="ru" + CHARSET="koi8-r" + CONSOLE_FONT="Cyr_a8x16" + KDEKEYBOARDS="de,us,fr" + TZ="Europe/Moscow" + ;; + # Slovakia + sk) + COUNTRY="sk" + LANG="sk_SK.UTF-8" + KEYTABLE="sk-qwerty" + XKEYBOARD="sk" + KDEKEYBOARD="sk" + CHARSET="iso8859-2" + KDEKEYBOARDS="us,de" + TZ="Europe/Bratislava" + CONSOLE_FONT="iso02g" + ;; + # Slovenia + sl) + LANGUAGE="sl" + COUNTRY="si" + LANG="sl_SI.UTF-8" + KEYTABLE="slovene" + XKEYBOARD="sl" + KDEKEYBOARD="si" + CHARSET="iso8859-2" + KDEKEYBOARDS="us,de" + TZ="Europe/Ljubljana" + CONSOLE_FONT="iso02g" + ;; + tr) +# Turkish version (guessed) + COUNTRY="tr" + LANG="tr_TR.UTF-8" + KEYTABLE="tr_q-latin5" + XKEYBOARD="tr" + KDEKEYBOARD="tr" + CHARSET="iso8859-9" + KDEKEYBOARDS="us,de,fr" + TZ="Europe/Istanbul" + ;; + # Taiwan - Traditional Chinese version + tw) + COUNTRY="tw" + LANG="zh_TW.UTF-8" + LANGUAGE="zh_TW.Big5" + KEYTABLE="us" + XKEYBOARD="us" + KDEKEYBOARD="us" + CHARSET="iso8859-1" + KDEKEYBOARDS="us" + XMODIFIERS="@im=xcin" + TZ="Asia/Taipei" + ;; + # Great Britian + uk) + COUNTRY="uk" + LANG="en_GB.UTF-8" + LANGUAGE="en" + KEYTABLE="uk" + XKEYBOARD="uk" + KDEKEYBOARD="gb" + CHARSET="iso8859-1" + KDEKEYBOARDS="us" + TZ="Europe/London" + ;; + # US and default configuration + *) + LANGUAGE="us" + COUNTRY="us" + LANG="C" + KEYTABLE="us" + XKEYBOARD="us" + KDEKEYBOARD="us" + CHARSET="iso8859-1" + KDEKEYBOARDS="de,fr" + TZ="America/New_York" + ;; +esac +} + +############################################################################# +# This function gets an uri or a comma separated list of uris as parameter. +# It will then try to mount these uris and add them to the union at / +include_in_fsroot_union () { + union_id=0 # used to have guarantee differing names for the unions mount point + union_type=$1 + for ROOTFS in $(echo $2 |sed 's/,/ /g'); do + union_id=$(($union_id + 1)) + srvproto=$(uri_token $ROOTFS prot) + case $srvproto in + nfs) + # activate kernel nfs if not present, nfsroot consists now of two + # different parts + root_path=$(uri_token $ROOTFS path) + nfsserver=$(uri_token $ROOTFS server) + mkdir -p /mnt/tmp/${root_path}_${union_id} + for proto in tcp udp fail; do + [ $proto = "fail" ] && { error "$scfg_nfs"; break; } + mount -n -t nfs -o ro,nolock,$proto $nfsserver:$root_path \ + /mnt/tmp/${root_path}_${union_id} && break + done + ;; + *nbd) + echo "Not working yet" + nbdmod=$srvproto + # get settings for nbd-client, filesystem equals to path in URI + # notation + nbdhost=$(uri_token $ROOTFS server) + nbdport=$(uri_token $ROOTFS port) + nbdrfst=$(uri_token $ROOTFS path) + echo -e "(D)NBD $ROOTFS parsed to $srvproto - $nbdhost - \ + $nbdport - $nbdrfst" >> /tmp/testlog + #FIXME: do mount + ;; + aoe) + echo "Not implemented yet" + ;; + iscsi) + echo "Not implemented yet" + #iscsiserver=$(uri_token $ROOTFS server) + #iscsiport=$(uri_token $ROOTFS port) + #iscsitarget=$(uri_token $ROOTFS path) + ;; + esac + if [ "X$union_type" == "XUnionFS" ]; then + [ "$DEBUGLEVEL" -gt 2 -a "$DEBUGLEVEL" != 8 ] && \ + echo "Using unionctl to mount ${root_path}_${union_id} (type: \ + $union_type)" + unionctl /mnt/ --add --after 1 --mode ro /mnt/tmp/${root_path}_${union_id} + elif [ "X$union_type" == "XAUFS" ]; then + # unionctl for aufs is a sh script needing tools not included in our + # initramfs + [ "$DEBUGLEVEL" -gt 2 -a "$DEBUGLEVEL" != 8 ] && \ + echo "Using aufs-mount to mount ${root_path}_${union_id} (type: $union_type)" + mount -n -o remount,add:1:/mnt/tmp/${root_path}_${union_id}=ro none /mnt + else + error ${init_loadunions} nonfatal + fi + done +} + +############################################################################# +# dummy functions - avoid undefined functions in servconfig (functions are +# normally overwritten by settings within distro-functions) - a file +# generated by mkdxsinitrd from <distro>/functions-default & ~-version + +# setup initial boot scripts (for most standard distributions, gentoo is to +# be handled differently) +initial_boot () { +: +} +# function for udev configuration +config_udev () { +: +} +# function for ntp configuration +config_ntp () { +: +} +# function for afs +config_afs () { +: +} +# function for atd +config_atd () { +: +} +# function for configuration of cron services +config_cron () { +: +} +# syslog service +config_syslog () { +: +} +# secure shell service +config_sshd () { +: +} +# snmp agent for remote monitoring +config_snmp () { +: +} +# consolefont +consolefont () { +: +} +# acpi and powersave +config_acpi () { +: +} +# configure hal, dbus, resmgr and services like that +config_dreshal () { +: +} +# configure automounter, simple NFSv3 imports only +config_automount () { +: +} +# configure print services / start requested printer daemon +config_printer () { +: +} +# configure bluetooth services +config_bt () { +: +} +# create a compliant runlevel script, needed for boot.slx +d_mkrlscript () { +: +} +# start name service caching daemon +config_nscd () { +: +} +# configure automounter +config_automount () { +: +} +# configure samba service (not winbind, but nmbd, smbd) +config_samba () { +: +} +# start portmapper (needed at least for nfs and nis services) +config_portmap () { +: +} +# start nis/ypbind +config_nis () { +: +} +# configure nfsv4 stuff +config_nfsv4 () { +: +} +# configure keyboard layout +keytable () { +: +} +# set up localization like keytable, console +dlocale () { +: +} |