summaryrefslogtreecommitdiffstats
path: root/include/hw/misc
Commit message (Collapse)AuthorAgeFilesLines
* hw/misc/pvpanic: add PCI interface supportMihai Carabas2021-01-291-0/+1
| | | | | | | | | | | | Add PCI interface support for PVPANIC device. Create a new file pvpanic-pci.c where the PCI specific routines reside and update the build system with the new files and config structure. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/misc/pvpanic: split-out generic and bus dependent codeMihai Carabas2021-01-291-2/+21
| | | | | | | | | | | | | | | | | | To ease the PCI device addition in next patches, split the code as follows: - generic code (read/write/setup) is being kept in pvpanic.c - ISA dependent code moved to pvpanic-isa.c Also, rename: - ISA_PVPANIC_DEVICE -> PVPANIC_ISA_DEVICE. - TYPE_PVPANIC -> TYPE_PVPANIC_ISA. - MemoryRegion io -> mr. - pvpanic_ioport_* in pvpanic_*. Update the build system with the new files and config structure. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* macio: wire macio GPIOs to OpenPIC using sysbus IRQsMark Cave-Ayland2021-01-131-2/+0Star
| | | | | | | | | This both allows the wiring to be done as Ben suggested in his original comment in gpio.c and also enables the OpenPIC object property link to be removed. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20201229175619.6051-7-mark.cave-ayland@ilande.co.uk> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
* macio: move OpenPIC inside macio-newworld deviceMark Cave-Ayland2021-01-131-1/+1
| | | | | | | | | | | | The OpenPIC device is located within the macio device on real hardware so make it a child of the macio-newworld device. This also removes the need for setting and checking a separate PIC object property link on the macio-newworld device which currently causes the automated QOM introspection tests to fail. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20201229175619.6051-6-mark.cave-ayland@ilande.co.uk> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
* macio: move heathrow PIC inside macio-oldworld deviceMark Cave-Ayland2021-01-131-1/+1
| | | | | | | | | | | | The heathrow PIC is located within the macio device on real hardware so make it a child of the macio-oldworld device. This also removes the need for setting and checking a separate PIC object property link on the macio-oldworld device which currently causes the automated QOM introspection tests to fail. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20201229175619.6051-4-mark.cave-ayland@ilande.co.uk> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
* hw/misc: Add a PWM module for NPCM7XXHao Wu2021-01-121-0/+105
| | | | | | | | | | | | | | | | | | | | | | The PWM module is part of NPCM7XX module. Each NPCM7XX module has two identical PWM modules. Each module contains 4 PWM entries. Each PWM has two outputs: frequency and duty_cycle. Both are computed using inputs from software side. This module does not model detail pulse signals since it is expensive. It also does not model interrupts and watchdogs that are dependant on the detail models. The interfaces for these are left in the module so that anyone in need for these functionalities can implement on their own. The user can read the duty cycle and frequency using qom-get command. Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210108190945.949196-5-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/timer: Refactor NPCM7XX Timer to use CLK clockHao Wu2021-01-121-6/+0Star
| | | | | | | | | | | | This patch makes NPCM7XX Timer to use a the timer clock generated by the CLK module instead of the magic number TIMER_REF_HZ. Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210108190945.949196-3-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/misc: Add clock converter in NPCM7XX CLK moduleHao Wu2021-01-121-2/+138
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch allows NPCM7XX CLK module to compute clocks that are used by other NPCM7XX modules. Add a new struct NPCM7xxClockConverterState which represents a single converter. Each clock converter in CLK module represents one converter in NPCM7XX CLK Module(PLL, SEL or Divider). Each converter takes one or more input clocks and converts them into one output clock. They form a clock hierarchy in the CLK module and are responsible for outputing clocks for various other modules in an NPCM7XX SoC. Each converter has a function pointer called "convert" which represents the unique logic for that converter. The clock contains two initialization information: ConverterInitInfo and ConverterConnectionInfo. They represent the vertices and edges in the clock diagram respectively. Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210108190945.949196-2-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/ssi: Rename SSI 'slave' as 'peripheral'Philippe Mathieu-Daudé2020-12-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | In order to use inclusive terminology, rename SSI 'slave' as 'peripheral', following the specification resolution: https://www.oshwa.org/a-resolution-to-redefine-spi-signal-names/ Patch created mechanically using: $ sed -i s/SSISlave/SSIPeripheral/ $(git grep -l SSISlave) $ sed -i s/SSI_SLAVE/SSI_PERIPHERAL/ $(git grep -l SSI_SLAVE) $ sed -i s/ssi-slave/ssi-peripheral/ $(git grep -l ssi-slave) $ sed -i s/ssi_slave/ssi_peripheral/ $(git grep -l ssi_slave) $ sed -i s/ssi_create_slave/ssi_create_peripheral/ \ $(git grep -l ssi_create_slave) Then in VMStateDescription vmstate_ssi_peripheral we restored the "SSISlave" migration stream name (to avoid breaking migration). Finally the following files have been manually tweaked: - hw/ssi/pl022.c - hw/ssi/xilinx_spips.c Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20201012124955.3409127-4-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* hw/misc: add an EMC141{3,4} device modelJohn Wang2020-12-101-0/+37
| | | | | | | | | | | | | Largely inspired by the TMP421 temperature sensor, here is a model for the EMC1413/EMC1414 temperature sensors. Specs can be found here : http://ww1.microchip.com/downloads/en/DeviceDoc/20005274A.pdf Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20201122105134.671-1-wangzhiqiang.bj@bytedance.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
* hw/misc/stm32f2xx_syscfg: Remove extraneous IRQPhilippe Mathieu-Daudé2020-11-101-2/+0Star
| | | | | | | | | | | | The system configuration controller (SYSCFG) doesn't have any output IRQ (and the INTC input #71 belongs to the UART6). Remove the invalid code. Fixes: db635521a02 ("stm32f205: Add the stm32f205 SoC") Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201107193403.436146-3-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Merge remote-tracking branch ↵Peter Maydell2020-11-042-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/philmd-gitlab/tags/mips-fixes-20201103' into staging MIPS patches queue - Removal of the 'r4k' machine (deprecated before 5.0) - Fix LGPL license text (Chetan Pant) - Support unaligned accesses on Loongson-3 (Huacai Chen) - Fix out-of-bound access in Loongson-3 embedded I/O interrupt controller (Alex Chen) CI jobs results: . https://cirrus-ci.com/build/6324890389184512 . https://gitlab.com/philmd/qemu/-/pipelines/211275262 . https://travis-ci.org/github/philmd/qemu/builds/741188958 # gpg: Signature made Tue 03 Nov 2020 17:30:30 GMT # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd-gitlab/tags/mips-fixes-20201103: target/mips: Add unaligned access support for MIPS64R6 and Loongson-3 target/mips: Fix Lesser GPL version number hw/intc/loongson: Fix incorrect 'core' calculation in liointc_read/write hw/mips/boston: Fix Lesser GPL version number hw/mips: Fix Lesser GPL version number hw/mips: Remove the 'r4k' machine Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * hw/mips: Fix Lesser GPL version numberChetan Pant2020-11-032-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | There is no "version 2" of the "Lesser" General Public License. It is either "GPL version 2.0" or "Lesser GPL version 2.1". This patch replaces all occurrences of "Lesser GPL version 2" with "Lesser GPL version 2.1" in comment section. Signed-off-by: Chetan Pant <chetan4windows@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20201016143509.26692-1-chetan4windows@gmail.com> [PMD: Split hw/ vs target/] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
* | hw/misc: Add Microchip PolarFire SoC SYSREG module supportBin Meng2020-11-031-0/+39
| | | | | | | | | | | | | | | | | | | | | | This creates a minimum model for Microchip PolarFire SoC SYSREG module. It only implements the ENVM_CR register to tell guest software that eNVM is running at the configured divider rate. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1603863010-15807-7-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
* | hw/misc: Add Microchip PolarFire SoC IOSCB module supportBin Meng2020-11-031-0/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This creates a model for PolarFire SoC IOSCB [1] module. It actually contains lots of sub-modules like various PLLs to control different peripherals. Only the mininum capabilities are emulated to make the HSS DDR memory initialization codes happy. Lots of sub-modules are created as an unimplemented devices. [1] PF_SoC_RegMap_V1_1/MPFS250T/mpfs250t_ioscb_memmap_dri.htm in https://www.microsemi.com/document-portal/doc_download/1244581-polarfire-soc-register-map Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1603863010-15807-5-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
* | hw/misc: Add Microchip PolarFire SoC DDR Memory Controller supportBin Meng2020-11-031-0/+56
|/ | | | | | | | | | | | | | | The PolarFire SoC DDR Memory Controller mainly includes 2 modules, called SGMII PHY module and the CFG module, as documented in the chipset datasheet. This creates a single file that groups these 2 modules, providing the minimum functionalities that make the HSS DDR initialization codes happy. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1603863010-15807-3-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
* Merge remote-tracking branch ↵Peter Maydell2020-10-294-0/+1265
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/pmaydell/tags/pull-target-arm-20201027-1' into staging target-arm queue: * raspi: add model of cprman clock manager * sbsa-ref: add an SBSA generic watchdog device * arm/trace: Fix hex printing * raspi: Add models of Pi 3 model A+, Pi Zero and Pi A+ * hw/arm/smmuv3: Set the restoration priority of the vSMMUv3 explicitly * Nuvoton NPCM7xx: Add USB, RNG, GPIO and watchdog support * hw/arm: fix min_cpus for xlnx-versal-virt platform * hw/arm/highbank: Silence warnings about missing fallthrough statements * linux-user: Support Aarch64 BTI * Armv7M systick: fix corner case bugs by rewriting to use ptimer # gpg: Signature made Tue 27 Oct 2020 11:27:10 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20201027-1: (48 commits) hw/timer/armv7m_systick: Rewrite to use ptimers hw/core/ptimer: Support ptimer being disabled by timer callback hw/arm/sbsa-ref: add SBSA watchdog device hw/watchdog: Implement SBSA watchdog device hw/arm/bcm2835_peripherals: connect the UART clock hw/char/pl011: add a clock input hw/misc/bcm2835_cprman: add sane reset values to the registers hw/misc/bcm2835_cprman: add the DSI0HSCK multiplexer hw/misc/bcm2835_cprman: implement clock mux behaviour hw/misc/bcm2835_cprman: add a clock mux skeleton implementation hw/misc/bcm2835_cprman: implement PLL channels behaviour hw/misc/bcm2835_cprman: add a PLL channel skeleton implementation hw/misc/bcm2835_cprman: implement PLLs behaviour hw/misc/bcm2835_cprman: add a PLL skeleton implementation hw/arm/raspi: add a skeleton implementation of the CPRMAN hw/arm/raspi: fix CPRMAN base address hw/core/clock: trace clock values in Hz instead of ns hw/core/clock: provide the VMSTATE_ARRAY_CLOCK macro arm/trace: Fix hex printing hw/arm/raspi: Add the Raspberry Pi 3 model A+ ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * hw/misc/bcm2835_cprman: add sane reset values to the registersLuc Michel2020-10-271-0/+269
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Those reset values have been extracted from a Raspberry Pi 3 model B v1.2, using the 2020-08-20 version of raspios. The dump was done using the debugfs interface of the CPRMAN driver in Linux (under '/sys/kernel/debug/clk'). Each exposed clock tree stage (PLLs, channels and muxes) can be observed by reading the 'regdump' file (e.g. 'plla/regdump'). Those values are set by the Raspberry Pi firmware at boot time (Linux expects them to be set when it boots up). Some stages are not exposed by the Linux driver (e.g. the PLL B). For those, the reset values are unknown and left to 0 which implies a disabled output. Once booted in QEMU, the final clock tree is very similar to the one visible on real hardware. The differences come from some unimplemented devices for which the driver simply disable the corresponding clock. Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * hw/misc/bcm2835_cprman: add the DSI0HSCK multiplexerLuc Michel2020-10-272-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | This simple mux sits between the PLL channels and the DSI0E and DSI0P clock muxes. This mux selects between PLLA-DSI0 and PLLD-DSI0 channel and outputs the selected signal to source number 4 of DSI0E/P clock muxes. It is controlled by the cm_dsi0hsck register. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * hw/misc/bcm2835_cprman: add a clock mux skeleton implementationLuc Michel2020-10-272-0/+507
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The clock multiplexers are the last clock stage in the CPRMAN. Each mux outputs one clock signal that goes out of the CPRMAN to the SoC peripherals. Each mux has at most 10 sources. The sources 0 to 3 are common to all muxes. They are: 0. ground (no clock signal) 1. the main oscillator (xosc) 2. "test debug 0" clock 3. "test debug 1" clock Test debug 0 and 1 are actual clock muxes that can be used as sources to other muxes (for debug purpose). Sources 4 to 9 are mux specific and can be unpopulated (grounded). Those sources are fed by the PLL channels outputs. One corner case exists for DSI0E and DSI0P muxes. They have their source number 4 connected to an intermediate multiplexer that can select between PLLA-DSI0 and PLLD-DSI0 channel. This multiplexer is called DSI0HSCK and is not a clock mux as such. It is really a simple mux from the hardware point of view (see https://elinux.org/The_Undocumented_Pi). This mux is not implemented in this commit. Note that there is some muxes for which sources are unknown (because of a lack of documentation). For those cases all the sources are connected to ground in this implementation. Each clock mux output is exported by the CPRMAN at the qdev level, adding the suffix '-out' to the mux name to form the output clock name. (E.g. the 'uart' mux sees its output exported as 'uart-out' at the CPRMAN level.) Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * hw/misc/bcm2835_cprman: add a PLL channel skeleton implementationLuc Michel2020-10-272-0/+190
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PLLs are composed of multiple channels. Each channel outputs one clock signal. They are modeled as one device taking the PLL generated clock as input, and outputting a new clock. A channel shares the CM register with its parent PLL, and has its own A2W_CTRL register. A write to the CM register will trigger an update of the PLL and all its channels, while a write to an A2W_CTRL channel register will update the required channel only. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * hw/misc/bcm2835_cprman: implement PLLs behaviourLuc Michel2020-10-271-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The CPRMAN PLLs generate a clock based on a prescaler, a multiplier and a divider. The prescaler doubles the parent (xosc) frequency, then the multiplier/divider are applied. The multiplier has an integer and a fractional part. This commit also implements the CPRMAN CM_LOCK register. This register reports which PLL is currently locked. We consider a PLL has being locked as soon as it is enabled (on real hardware, there is a delay after turning a PLL on, for it to stabilize). Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * hw/misc/bcm2835_cprman: add a PLL skeleton implementationLuc Michel2020-10-272-0/+173
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are 5 PLLs in the CPRMAN, namely PLL A, C, D, H and B. All of them take the xosc clock as input and produce a new clock. This commit adds a skeleton implementation for the PLLs as sub-devices of the CPRMAN. The PLLs are instantiated and connected internally to the main oscillator. Each PLL has 6 registers : CM, A2W_CTRL, A2W_ANA[0,1,2,3], A2W_FRAC. A write to any of them triggers a call to the (not yet implemented) pll_update function. If the main oscillator changes frequency, an update is also triggered. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * hw/arm/raspi: add a skeleton implementation of the CPRMANLuc Michel2020-10-272-0/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The BCM2835 CPRMAN is the clock manager of the SoC. It is composed of a main oscillator, and several sub-components (PLLs, multiplexers, ...) to generate the BCM2835 clock tree. This commit adds a skeleton of the CPRMAN, with a dummy register read/write implementation. It embeds the main oscillator (xosc) from which all the clocks will be derived. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * hw/misc: Add npcm7xx random number generatorHavard Skinnemoen2020-10-271-0/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The RNG module returns a byte of randomness when the Data Valid bit is set. This implementation ignores the prescaler setting, and loads a new value into RNGD every time RNGCS is read while the RNG is enabled and random data is available. A qtest featuring some simple randomness tests is included. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * hw/timer: Adding watchdog for NPCM7XX Timer.Hao Wu2020-10-271-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The watchdog is part of NPCM7XX's timer module. Its behavior is controlled by the WTCR register in the timer. When enabled, the watchdog issues an interrupt signal after a pre-set amount of cycles, and issues a reset signal shortly after that. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: deleted blank line at end of npcm_watchdog_timer-test.c] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* | Merge remote-tracking branch 'remotes/philmd-gitlab/tags/led-api-20201026' ↵Peter Maydell2020-10-283-0/+101
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into staging API to model LED. CI jobs results: . https://cirrus-ci.com/build/4879251751043072 . https://gitlab.com/philmd/qemu/-/pipelines/207661784 . https://travis-ci.org/github/philmd/qemu/builds/738958191 . https://app.shippable.com/github/philmd/qemu/runs/891/summary/console # gpg: Signature made Mon 26 Oct 2020 22:03:59 GMT # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd-gitlab/tags/led-api-20201026: hw/arm/tosa: Replace fprintf() calls by LED devices hw/misc/mps2-scc: Use the LED device hw/misc/mps2-fpgaio: Use the LED device hw/arm/aspeed: Add the 3 front LEDs drived by the PCA9552 #1 hw/misc/led: Emit a trace event when LED intensity has changed hw/misc/led: Allow connecting from GPIO output hw/misc/led: Add a LED device Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * hw/misc/mps2-scc: Use the LED devicePhilippe Mathieu-Daudé2020-10-261-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Per the 'ARM MPS2 and MPS2+ FPGA Prototyping Boards Technical Reference Manual' (100112_0200_07_en): 2.1 Overview of the MPS2 and MPS2+ hardware The MPS2 and MPS2+ FPGA Prototyping Boards contain the following components and interfaces: * User switches and user LEDs: - Two green LEDs and two push buttons that connect to the FPGA. - Eight green LEDs and one 8-way dip switch that connect to the MCC. Add the 8 LEDs connected to the MCC. This replaces the 'mps2_scc_leds' trace events by the generic 'led_set_intensity' event. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-Id: <20200912134041.946260-7-f4bug@amsat.org>
| * hw/misc/mps2-fpgaio: Use the LED devicePhilippe Mathieu-Daudé2020-10-261-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Per the 'ARM MPS2 and MPS2+ FPGA Prototyping Boards Technical Reference Manual' (100112_0200_07_en): 2.1 Overview of the MPS2 and MPS2+ hardware The MPS2 and MPS2+ FPGA Prototyping Boards contain the following components and interfaces: * User switches and user LEDs: - Two green LEDs and two push buttons that connect to the FPGA. - Eight green LEDs and one 8-way dip switch that connect to the MCC. Add the 2 LEDs connected to the FPGA. This replaces the 'mps2_fpgaio_leds' trace events by the generic 'led_set_intensity' event. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-Id: <20200912134041.946260-6-f4bug@amsat.org>
| * hw/misc/led: Allow connecting from GPIO outputPhilippe Mathieu-Daudé2020-10-261-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some devices expose GPIO lines. Add a GPIO qdev input to our LED device, so we can connect a GPIO output using qdev_connect_gpio_out(). When used with GPIOs, the intensity can only be either minium or maximum. This depends of the polarity of the GPIO (which can be inverted). Declare the GpioPolarity type to model the polarity. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-Id: <20200912134041.946260-3-f4bug@amsat.org>
| * hw/misc/led: Add a LED devicePhilippe Mathieu-Daudé2020-10-261-0/+87
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a LED device which can be connected to a GPIO output. They can also be dimmed with PWM devices. For now we do not implement the dimmed mode, but in preparation of a future implementation, we start using the LED intensity. LEDs are limited to a fixed set of colors. Reviewed-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200912134041.946260-2-f4bug@amsat.org>
* | hw/misc/sifive_u_otp: Add backend drive supportGreen Wan2020-10-221-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add '-drive' support to OTP device. Allow users to assign a raw file as OTP image. test commands for 16k otp.img filled with zero: $ dd if=/dev/zero of=./otp.img bs=1k count=16 $ ./qemu-system-riscv64 -M sifive_u -m 256M -nographic -bios none \ -kernel ../opensbi/build/platform/sifive/fu540/firmware/fw_payload.elf \ -d guest_errors -drive if=none,format=raw,file=otp.img Signed-off-by: Green Wan <green.wan@sifive.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20201020033732.12921-3-green.wan@sifive.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
* | hw/misc/sifive_u_otp: Add write function and write-once protectionGreen Wan2020-10-221-0/+3
|/ | | | | | | | | | | | | - Add write operation to update fuse data bit when PWE bit is on. - Add array, fuse_wo, to store the 'written' status for all bits of OTP to block the write operation. Signed-off-by: Green Wan <green.wan@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-id: 20201020033732.12921-2-green.wan@sifive.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
* qom: fix objects with improper parent typePaolo Bonzini2020-10-121-1/+1
| | | | | | | | | | | Some objects accidentally inherit ObjectClass instead of Object. They compile silently but may crash after downcasting. In this patch, we introduce a coccinelle script to find broken declarations and fix them manually with proper base type. Signed-off-by: Sergey Nizovtsev <snizovtsev@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Use OBJECT_DECLARE_SIMPLE_TYPE when possibleEduardo Habkost2020-09-1851-187/+63Star
| | | | | | | | | | | | | This converts existing DECLARE_INSTANCE_CHECKER usage to OBJECT_DECLARE_SIMPLE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-6-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* Use OBJECT_DECLARE_TYPE when possibleEduardo Habkost2020-09-184-16/+4Star
| | | | | | | | | | | | | | This converts existing DECLARE_OBJ_CHECKERS usage to OBJECT_DECLARE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-5-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* sifive: Use DECLARE_*CHECKER* macrosEduardo Habkost2020-09-184-8/+8
| | | | | | | | | | $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* sifive: Move QOM typedefs and add missing includesEduardo Habkost2020-09-184-8/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* hw/misc: Add NPCM7xx Clock Controller device modelHavard Skinnemoen2020-09-141-0/+48
| | | | | | | | | | | | | | | | | | | | | | Enough functionality to boot the Linux kernel has been implemented. This includes: - Correct power-on reset values so the various clock rates can be accurately calculated. - Clock enables stick around when written. In addition, a best effort attempt to implement SECCNT and CNTR25M was made even though I don't think the kernel needs them. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-3-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/misc: Add NPCM7xx System Global Control Registers device modelHavard Skinnemoen2020-09-141-0/+43
| | | | | | | | | | | | | | | | | | | | | Implement a device model for the System Global Control Registers in the NPCM730 and NPCM750 BMC SoCs. This is primarily used to enable SMP boot (the boot ROM spins reading the SCRPAD register) and DDR memory initialization; other registers are best effort for now. The reset values of the MDLR and PWRON registers are determined by the SoC variant (730 vs 750) and board straps respectively. Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-2-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Merge remote-tracking branch ↵Peter Maydell2020-09-134-0/+287
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/alistair/tags/pull-riscv-to-apply-20200910' into staging This PR includes multiple fixes and features for RISC-V: - Fixes a bug in printing trap causes - Allows 16-bit writes to the SiFive test device. This fixes the failure to reboot the RISC-V virt machine - Support for the Microchip PolarFire SoC and Icicle Kit - A reafactor of RISC-V code out of hw/riscv # gpg: Signature made Thu 10 Sep 2020 19:08:06 BST # gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054 # gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full] # Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054 * remotes/alistair/tags/pull-riscv-to-apply-20200910: (30 commits) hw/riscv: Sort the Kconfig options in alphabetical order hw/riscv: Drop CONFIG_SIFIVE hw/riscv: Always build riscv_hart.c hw/riscv: Move sifive_test model to hw/misc hw/riscv: Move sifive_uart model to hw/char hw/riscv: Move riscv_htif model to hw/char hw/riscv: Move sifive_plic model to hw/intc hw/riscv: Move sifive_clint model to hw/intc hw/riscv: Move sifive_gpio model to hw/gpio hw/riscv: Move sifive_u_otp model to hw/misc hw/riscv: Move sifive_u_prci model to hw/misc hw/riscv: Move sifive_e_prci model to hw/misc hw/riscv: sifive_u: Connect a DMA controller hw/riscv: clint: Avoid using hard-coded timebase frequency hw/riscv: microchip_pfsoc: Hook GPIO controllers hw/riscv: microchip_pfsoc: Connect 2 Cadence GEMs hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23 hw/net: cadence_gem: Add a new 'phy-addr' property hw/riscv: microchip_pfsoc: Connect a DMA controller hw/dma: Add SiFive platform DMA controller emulation ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/riscv/trace-events
| * hw/riscv: Move sifive_test model to hw/miscBin Meng2020-09-101-0/+45
| | | | | | | | | | | | | | | | | | | | | | This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_test model to hw/misc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-10-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
| * hw/riscv: Move sifive_u_otp model to hw/miscBin Meng2020-09-101-0/+80
| | | | | | | | | | | | | | | | | | | | | | This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_u_otp model to hw/misc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-4-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
| * hw/riscv: Move sifive_u_prci model to hw/miscBin Meng2020-09-101-0/+91
| | | | | | | | | | | | | | | | | | | | | | This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_u_prci model to hw/misc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-3-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
| * hw/riscv: Move sifive_e_prci model to hw/miscBin Meng2020-09-101-0/+71
| | | | | | | | | | | | | | | | | | | | | | This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_e_prci model to hw/misc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-2-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
* | Use DECLARE_*CHECKER* macrosEduardo Habkost2020-09-0957-113/+138
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* | Move QOM typedefs and add missing includesEduardo Habkost2020-09-0957-132/+247
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* Merge remote-tracking branch 'remotes/legoater/tags/pull-aspeed-20200901' ↵Peter Maydell2020-09-032-1/+13
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into staging Various fixes of Aspeed machines : * New Supermicro X11 BMC machine (Erik) * Fixed valid access size on AST2400 SCU * Improved robustness of the ftgmac100 model. * New flash models in m25p80 (Igor) * Fixed reset sequence of SDHCI/eMMC controllers * Improved support of the AST2600 SDMC (Joel) * Couple of SMC cleanups # gpg: Signature made Tue 01 Sep 2020 13:39:20 BST # gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1 # gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1 * remotes/legoater/tags/pull-aspeed-20200901: hw: add a number of SPI-flash's of m25p80 family arm: aspeed: add strap define `25HZ` of AST2500 aspeed/smc: Open AHB window of the second chip of the AST2600 FMC controller aspeed/sdmc: Simplify calculation of RAM bits aspeed/sdmc: Allow writes to unprotected registers aspeed/sdmc: Perform memory training ftgmac100: Improve software reset ftgmac100: Fix integer overflow in ftgmac100_do_tx() ftgmac100: Check for invalid len and address before doing a DMA transfer ftgmac100: Change interrupt status when a DMA error occurs ftgmac100: Fix interrupt status "Packet moved to RX FIFO" ftgmac100: Fix interrupt status "Packet transmitted on ethernet" ftgmac100: Fix registers that can be read aspeed/sdhci: Fix reset sequence aspeed/smc: Fix max_slaves of the legacy SMC device aspeed/smc: Fix MemoryRegionOps definition hw/arm/aspeed: Add board model for Supermicro X11 BMC aspeed/scu: Fix valid access size on AST2400 m25p80: Add support for n25q512ax3 m25p80: Return the JEDEC ID twice for mx25l25635e Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * arm: aspeed: add strap define `25HZ` of AST2500Igor Kononenko2020-09-011-0/+1
| | | | | | | | | | | | | | | | | | | | Provide a definition for the "25Hz reference clock input mode" strap Signed-off-by: Igor Kononenko <i.kononenko@yadro.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200811203502.20382-1-i.kononenko@yadro.com> Message-Id: <20200819100956.2216690-21-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
| * aspeed/sdmc: Perform memory trainingJoel Stanley2020-09-011-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows qemu to run the "normal" power on reset boot path through u-boot, where the DDR is trained. An enhancement would be to have the SCU bit stick across qemu reboots, but be unset on initial boot. Proper modelling would be to discard all writes to the phy setting regs at offset 0x100 - 0x400 and to model the phy status regs at offset 0x400. The status regs model would only need to account for offets 0x00, 0x50, 0x68 and 0x7c. Signed-off-by: Joel Stanley <joel@jms.id.au> [ clg: checkpatch fixes ] Message-Id: <20200819100956.2216690-17-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2025-01-03 18:16:30 +0100