summaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* hw/arm/virt: KVM: The IPA lower bound is 32Andrew Jones2021-03-122-3/+7
| | | | | | | | | | | | | | | | | | | | | The virt machine already checks KVM_CAP_ARM_VM_IPA_SIZE to get the upper bound of the IPA size. If that bound is lower than the highest possible GPA for the machine, then QEMU will error out. However, the IPA is set to 40 when the highest GPA is less than or equal to 40, even when KVM may support an IPA limit as low as 32. This means KVM may fail the VM creation unnecessarily. Additionally, 40 is selected with the value 0, which means use the default, and that gets around a check in some versions of KVM, causing a difficult to debug fail. Always use the IPA size that corresponds to the highest possible GPA, unless it's lower than 32, in which case use 32. Also, we must still use 0 when KVM only supports the legacy fixed 40 bit IPA. Suggested-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Message-id: 20210310135218.255205-3-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* target/arm: Update sve reduction vs simd_descRichard Henderson2021-03-122-2/+2
| | | | | | | | | | | | | | | With the reduction operations, we intentionally increase maxsz to the next power of 2, so as to fill out the reduction tree correctly. Since e2e7168a214b, oprsz must equal maxsz, with exceptions for small vectors, so this triggers an assertion for vector sizes > 32 that are not themselves a power of 2. Pass the power-of-two value in the simd_data field instead. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210309155305.11301-9-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* target/arm: Update WHILE for PREDDESCRichard Henderson2021-03-122-5/+6
| | | | | | | | | | Since b64ee454a4a0, all predicate operations should be using these field macros for predicates. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210309155305.11301-8-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* target/arm: Update CNTP for PREDDESCRichard Henderson2021-03-122-6/+6
| | | | | | | | | | Since b64ee454a4a0, all predicate operations should be using these field macros for predicates. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210309155305.11301-7-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* target/arm: Update BRKA, BRKB, BRKN for PREDDESCRichard Henderson2021-03-122-18/+16Star
| | | | | | | | | | Since b64ee454a4a0, all predicate operations should be using these field macros for predicates. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210309155305.11301-6-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* target/arm: Update find_last_active for PREDDESCRichard Henderson2021-03-122-7/+6Star
| | | | | | | | | | Since b64ee454a4a0, all predicate operations should be using these field macros for predicates. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210309155305.11301-5-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* target/arm: Fix sve_punpk_p vs odd vector lengthsRichard Henderson2021-03-121-2/+2
| | | | | | | | | | Wrote too much with punpk1 with vl % 512 != 0. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210309155305.11301-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* target/arm: Fix sve_zip_p vs odd vector lengthsRichard Henderson2021-03-121-11/+14
| | | | | | | | | | | | | | | | Wrote too much with low-half zip (zip1) with vl % 512 != 0. Adjust all of the x + (y << s) to x | (y << s) as a style fix. We only ever have exact overlap between D, M, and N. Therefore we only need a single temporary, and we do not need to check for partial overlap. Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210309155305.11301-3-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* target/arm: Fix sve_uzp_p vs odd vector lengthsRichard Henderson2021-03-121-9/+21
| | | | | | | | | | | | | | | | Missed out on compressing the second half of a predicate with length vl % 512 > 256. Adjust all of the x + (y << s) to x | (y << s) as a general style fix. Drop the extract64 because the input uint64_t are known to be already zero-extended from the current size of the predicate. Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210309155305.11301-2-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Merge remote-tracking branch ↵Peter Maydell2021-03-1112-19/+19
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/vivier2/tags/trivial-branch-for-6.0-pull-request' into staging Pull request # gpg: Signature made Wed 10 Mar 2021 21:56:09 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-6.0-pull-request: (22 commits) sysemu: Let VMChangeStateHandler take boolean 'running' argument sysemu/runstate: Let runstate_is_running() return bool hw/lm32/Kconfig: Have MILKYMIST select LM32_DEVICES hw/lm32/Kconfig: Rename CONFIG_LM32 -> CONFIG_LM32_DEVICES hw/lm32/Kconfig: Introduce CONFIG_LM32_EVR for lm32-evr/uclinux boards qemu-common.h: Update copyright string to 2021 tests/fp/fp-test: Replace the word 'blacklist' qemu-options: Replace the word 'blacklist' seccomp: Replace the word 'blacklist' scripts/tracetool: Replace the word 'whitelist' ui: Replace the word 'whitelist' virtio-gpu: Adjust code space style exec/memory: Use struct Object typedef fuzz-test: remove unneccessary debugging flags net: Use id_generate() in the network subsystem, too MAINTAINERS: Fix the location of tools manuals vhost_user_gpu: Drop dead check for g_malloc() failure backends/dbus-vmstate: Fix short read error handling target/hexagon/gen_tcg_funcs: Fix a typo hw/elf_ops: Fix a typo ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * sysemu: Let VMChangeStateHandler take boolean 'running' argumentPhilippe Mathieu-Daudé2021-03-097-8/+8
| | | | | | | | | | | | | | | | | | | | | | The 'running' argument from VMChangeStateHandler does not require other value than 0 / 1. Make it a plain boolean. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20210111152020.1422021-3-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
| * target/hexagon/gen_tcg_funcs: Fix a typoPhilippe Mathieu-Daudé2021-03-091-7/+7
| | | | | | | | | | | | | | Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Message-Id: <20210225181507.3624509-1-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
| * Various spelling fixesMichael Tokarev2021-03-094-4/+4
| | | | | | | | | | | | | | | | | | | | | | An assorted set of spelling fixes in various places. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20210309111510.79495-1-mjt@msgid.tls.msk.ru> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* | Merge remote-tracking branch ↵Peter Maydell2021-03-1114-17/+17
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/stsquad/tags/pull-testing-docs-xen-updates-100321-2' into staging Testing, guest-loader and other misc tweaks - add warning text to quickstart example - add CFI tests to CI - use --arch-only for docker pre-requisites - fix .editorconfig for emacs - add guest-loader for Xen-like hypervisor testing - move generic-loader docs into manual proper - move semihosting out of hw/ # gpg: Signature made Wed 10 Mar 2021 15:35:31 GMT # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * remotes/stsquad/tags/pull-testing-docs-xen-updates-100321-2: semihosting: Move hw/semihosting/ -> semihosting/ semihosting: Move include/hw/semihosting/ -> include/semihosting/ tests/avocado: add boot_xen tests docs: add some documentation for the guest-loader docs: move generic-loader documentation into the main manual hw/core: implement a guest-loader to support static hypervisor guests device_tree: add qemu_fdt_setprop_string_array helper hw/riscv: migrate fdt field to generic MachineState hw/board: promote fdt from ARM VirtMachineState to MachineState .editorconfig: update the automatic mode setting for Emacs tests/docker: Use --arch-only when building Debian cross image gitlab-ci.yml: Add jobs to test CFI flags gitlab-ci.yml: Allow custom # of parallel linkers tests/docker: add a test-tcg for building then running check-tcg docs/system: add a gentle prompt for the complexity to come Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * | semihosting: Move include/hw/semihosting/ -> include/semihosting/Philippe Mathieu-Daudé2021-03-1014-17/+17
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | We want to move the semihosting code out of hw/ in the next patch. This patch contains the mechanical steps, created using: $ git mv include/hw/semihosting/ include/ $ sed -i s,hw/semihosting,semihosting, $(git grep -l hw/semihosting) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210226131356.3964782-2-f4bug@amsat.org> Message-Id: <20210305135451.15427-2-alex.bennee@linaro.org>
* | Merge remote-tracking branch ↵Peter Maydell2021-03-1012-4764/+0Star
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/thuth-gitlab/tags/pull-request-2021-03-09' into staging * Add some missing gitlab-CI job dependencies * Re-enable "make check SPEED=slow" * Improve the gitlab-pipeline-status script * Clean up inclusing of qtest.h headers * Improve libqos/qgraph documentation * Fix downloading problem in the acceptance tests * Remove deprecated target tilegx * Add new bsd-user maintainers # gpg: Signature made Tue 09 Mar 2021 10:27:29 GMT # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * remotes/thuth-gitlab/tags/pull-request-2021-03-09: bsd-user: Add new maintainers Remove deprecated target tilegx Acceptance Tests: restore filtering of tests by target arch Acceptance Tests: restore downloading of VM images docs/devel/qgraph: improve qgraph documentation libqos/qgraph: format qgraph comments for sphinx documentation scripts/ci/gitlab-pipeline-status: give more info when pipeline not found scripts/ci/gitlab-pipeline-status: give more information on failures scripts/ci/gitlab-pipeline-status: split utlity function for HTTP GET meson: Re-enable the possibility to run "make check SPEED=slow" docker: OpenSBI build job depends on OpenSBI container docker: EDK2 build job depends on EDK2 container docker: Alpine build job depends on Alpine container qtest: delete superfluous inclusions of qtest.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * | Remove deprecated target tilegxThomas Huth2021-03-0911-4763/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TILE-Gx was only implemented in linux-user mode, but support for this CPU was removed from the upstream Linux kernel in 2018, and it has also been dropped from glibc, so there is no new Linux development taking place with this architecture. For running the old binaries, users can simply use older versions of QEMU. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210224183952.80463-1-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
| * | qtest: delete superfluous inclusions of qtest.hChen Qun2021-03-091-1/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are 23 files that include the "sysemu/qtest.h", but they do not use any qtest functions. Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com> Acked-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210226081414.205946-1-kuhn.chenqun@huawei.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
* | | Merge remote-tracking branch ↵Peter Maydell2021-03-103-336/+319Star
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/pmaydell/tags/pull-target-arm-20210310' into staging target-arm queue: * Add new mps3-an547 board * target/arm: Restrict v7A TCG cpus to TCG accel * Implement a Xilinx CSU DMA model * hw/timer/renesas_tmr: Fix use of uninitialized data in read_tcnt() # gpg: Signature made Wed 10 Mar 2021 13:56:20 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20210310: (54 commits) hw/timer/renesas_tmr: Fix use of uninitialized data in read_tcnt() hw/timer/renesas_tmr: Prefix constants for CSS values with CSS_ hw/ssi: xilinx_spips: Remove DMA related dead codes from zynqmp_spips hw/ssi: xilinx_spips: Clean up coding convention issues hw/arm: xlnx-zynqmp: Connect a Xilinx CSU DMA module for QSPI hw/arm: xlnx-zynqmp: Clean up coding convention issues hw/dma: Implement a Xilinx CSU DMA model target/arm: Restrict v7A TCG cpus to TCG accel tests/qtest/sse-timer-test: Test counter scaling changes tests/qtest/sse-timer-test: Test the system timer tests/qtest/sse-timer-test: Add simple test of the SSE counter docs/system/arm/mps2.rst: Document the new mps3-an547 board hw/arm/mps2-tz: Add new mps3-an547 board hw/arm/mps2-tz: Make initsvtor0 setting board-specific hw/arm/mps2-tz: Support running APB peripherals on different clock hw/misc/mps2-scc: Implement changes for AN547 hw/misc/mps2-fpgaio: Support AN547 DBGCTRL register hw/misc/mps2-fpgaio: Fold counters subsection into main vmstate hw/arm/mps2-tz: Make UART overflow IRQ board-specific hw/arm/armsse: Add SSE-300 support ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * | target/arm: Restrict v7A TCG cpus to TCG accelPhilippe Mathieu-Daudé2021-03-082-335/+318Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | KVM requires the target cpu to be at least ARMv8 architecture (support on ARMv7 has been dropped in commit 82bf7ae84ce: "target/arm: Remove KVM support for 32-bit Arm hosts"). A KVM-only build won't be able to run TCG cpus, move the v7A CPU definitions to cpu_tcg.c. Reported-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210306151801.2388182-1-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * | clock: Add ClockEvent parameter to callbacksPeter Maydell2021-03-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Clock framework allows users to specify a callback which is called after the clock's period has been updated. Some users need to also have a callback which is called before the clock period is updated. As the first step in adding support for notifying Clock users on pre-update events, add an argument to the ClockCallback to specify what event is being notified, and add an argument to the various functions for registering a callback to specify which events are of interest to that callback. Note that the documentation update renders correct the previously incorrect claim in 'Adding a new clock' that callbacks "will be explained in a following section". Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-2-peter.maydell@linaro.org
* | | Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-hex-20210306' ↵Peter Maydell2021-03-092-2/+3
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into staging Add hexagon to include/exec/poison.h Two Coverity fixes for target/hexagon/ # gpg: Signature made Sun 07 Mar 2021 01:37:05 GMT # gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F # gpg: issuer "richard.henderson@linaro.org" # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full] # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth-gitlab/tags/pull-hex-20210306: target/hexagon/opcodes: Add missing varargs cleanup target/hexagon: Fix shift amount check in fASHIFTL/fLSHIFTR exec: Poison Hexagon target-specific definitions Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * | target/hexagon/opcodes: Add missing varargs cleanupPhilippe Mathieu-Daudé2021-03-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix a trivial incorrect usage of variable argument macros detected by Coverity (missing_va_end: va_end was not called for ap). Fixes: Coverity CID 1446720 (VARARGS) Fixes: e3c00c2ed75 ("Hexagon (target/hexagon) opcode data structures") Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Message-Id: <20210223111253.2831285-1-f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
| * | target/hexagon: Fix shift amount check in fASHIFTL/fLSHIFTRTaylor Simpson2021-03-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes: a646e99cb90 ("Hexagon (target/hexagon) macros") Eliminate the following Coverity CIDs (Bad bit shift operation) 325227 325292 325425 325526 325561 325564 325578 325637 325736 325748 325786 325815 325837 Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Message-Id: <1614879425-9259-1-git-send-email-tsimpson@quicinc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* | | Merge remote-tracking branch 'remotes/philmd-gitlab/tags/renesas-20210306' ↵Peter Maydell2021-03-082-62/+50Star
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into staging Renesas patches queue - MMU prototype cleanups - Clarify licenses - Fine-grained Kconfig entries for SH-4 devices # gpg: Signature made Sat 06 Mar 2021 15:30:46 GMT # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd-gitlab/tags/renesas-20210306: hw/sh4/sh7750_regs: Replace link to license by its full content hw/sh4: Remove now unused CONFIG_SH4 from Kconfig hw/pci-host: Introduce SH_PCI Kconfig entry hw/block: Introduce TC58128 eeprom Kconfig entry hw/timer: Introduce SH_TIMER Kconfig entry hw/char: Introduce SH_SCI Kconfig entry hw/intc: Introduce SH_INTC Kconfig entry hw/sh4: Add missing Kconfig dependency on SH7750 for the R2D board hw/sh4: Add missing license target/sh4: Remove unused definitions target/sh4: Let get_physical_address() use MMUAccessType access_type target/sh4: Remove unused 'int access_type' argument target/sh4: Replace magic value by MMUAccessType definitions target/sh4: Fix code style for checkpatch.pl Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * | target/sh4: Remove unused definitionsPhilippe Mathieu-Daudé2021-03-061-11/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | Remove these confusing and unused definitions. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210127232151.3523581-6-f4bug@amsat.org>
| * | target/sh4: Let get_physical_address() use MMUAccessType access_typePhilippe Mathieu-Daudé2021-03-061-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | superh_cpu_tlb_fill() already provides a access_type variable of type MMUAccessType, and it is passed along, but casted as integer and renamed 'rw'. Simply replace 'int rw' by 'MMUAccessType access_type'. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210127232151.3523581-5-f4bug@amsat.org>
| * | target/sh4: Remove unused 'int access_type' argumentPhilippe Mathieu-Daudé2021-03-061-8/+7Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | get_mmu_address() and get_physical_address() don't use their 'int access_type' argument: remove it along with ACCESS_INT in superh_cpu_tlb_fill(). Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
| * | target/sh4: Replace magic value by MMUAccessType definitionsPhilippe Mathieu-Daudé2021-03-061-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | Replace the 0/1/2 magic values by the corresponding MMUAccessType. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210127232151.3523581-3-f4bug@amsat.org>
| * | target/sh4: Fix code style for checkpatch.plPhilippe Mathieu-Daudé2021-03-061-41/+41
| |/ | | | | | | | | | | | | | | We are going to move this code, fix its style first. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210127232151.3523581-2-f4bug@amsat.org>
* | Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into ↵Peter Maydell2021-03-081-2/+7
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | staging * fix tracing vs -daemonize (Daniel) * detect invalid CFI configuration (Daniele) * 32-bit PVH fix (David) * forward SCSI passthrough host-status to the SCSI HBA (Hannes) * detect ill-formed id in QMP object-add (Kevin) * miscellaneous bugfixes and cleanups (Keqian, Kostiantyn, myself, Peng Liang) * add nodelay option for chardev (myself) * deprecate -M kernel-irqchip=off on x86 (myself) * keep .d files (myself) * Fix -trace file (myself) # gpg: Signature made Sat 06 Mar 2021 10:43:12 GMT # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini-gitlab/tags/for-upstream: (23 commits) meson: Stop if cfi is enabled with system slirp trace: skip qemu_set_log_filename if no "-D" option was passed trace: fix "-trace file=..." meson: adjust timeouts for some slower tests build-sys: invoke ninja with -d keepdepfile qemu-option: do not suggest using the delay option scsi: move host_status handling into SCSI drivers scsi: inline sg_io_sense_from_errno() into the callers. scsi-generic: do not snoop the output of failed commands scsi: Add mapping for generic SCSI_HOST status to sense codes scsi: Rename linux-specific SG_ERR codes to generic SCSI_HOST error codes qemu-config: add error propagation to qemu_config_parse x86/pvh: extract only 4 bytes of start address for 32 bit kernels elf_ops: correct loading of 32 bit PVH kernel lsilogic: Use PCIDevice::exit instead of DeviceState::unrealize accel: kvm: Add aligment assert for kvm_log_clear_one_slot accel: kvm: Fix memory waste under mismatch page size vl.c: do not execute trace_init_backends() before daemonizing qom: Check for wellformed id in user_creatable_add_type() chardev: add nodelay option ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * | KVM: x86: do not fail if software breakpoint has already been removedPaolo Bonzini2021-03-061-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If kvm_arch_remove_sw_breakpoint finds that a software breakpoint does not have an INT3 instruction, it fails. This can happen if one sets a software breakpoint in a kernel module and then reloads it. gdb then thinks the breakpoint cannot be deleted and there is no way to add it back. Suggested-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* | | Merge remote-tracking branch ↵Peter Maydell2021-03-0811-101/+160
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/pmaydell/tags/pull-target-arm-20210308' into staging target-arm queue: * sbsa-ref: remove cortex-a53 from list of supported cpus * sbsa-ref: add 'max' to list of allowed cpus * target/arm: Add support for FEAT_SSBS, Speculative Store Bypass Safe * npcm7xx: add EMC model * xlnx-zynqmp: Remove obsolete 'has_rpu' property * target/arm: Speed up aarch64 TBL/TBX * virtio-mmio: improve virtio-mmio get_dev_path alog * target/arm: Use TCF0 and TFSRE0 for unprivileged tag checks * target/arm: Restrict v8M IDAU to TCG * target/arm/cpu: Update coding style to make checkpatch.pl happy * musicpal, tc6393xb, omap_lcdc, tcx: drop dead code for non-32-bit-RGB surfaces * Add new board: mps3-an524 # gpg: Signature made Mon 08 Mar 2021 11:56:24 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20210308: (49 commits) hw/arm/mps2: Update old infocenter.arm.com URLs docs/system/arm/mps2.rst: Document the new mps3-an524 board hw/arm/mps2-tz: Provide PL031 RTC on mps3-an524 hw/arm/mps2-tz: Stub out USB controller for mps3-an524 hw/arm/mps2-tz: Add new mps3-an524 board hw/arm/mps2-tz: Get armv7m_load_kernel() size argument from RAMInfo hw/arm/mps2-tz: Support ROMs as well as RAMs hw/arm/mps2-tz: Set MachineClass default_ram info from RAMInfo data hw/arm/mps2-tz: Make RAM arrangement board-specific hw/arm/mps2-tz: Allow boards to have different PPCInfo data hw/arm/mps2-tz: Size the uart-irq-orgate based on the number of UARTs hw/arm/mps2-tz: Move device IRQ info to data structures hw/arm/mps2-tz: Allow PPCPortInfo structures to specify device interrupts hw/arm/mps2-tz: Correct wrong interrupt numbers for DMA and SPI hw/misc/mps2-scc: Implement CFG_REG5 and CFG_REG6 for MPS3 AN524 hw/arm/mps2-tz: Make number of IRQs board-specific hw/arm/mps2-tz: Condition IRQ splitting on number of CPUs, not board type hw/arm/mps2-tz: Make FPGAIO switch and LED config per-board hw/misc/mps2-fpgaio: Support SWITCH register hw/misc/mps2-fpgaio: Make number of LEDs configurable by board ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * | target/arm/cpu: Update coding style to make checkpatch.pl happyPhilippe Mathieu-Daudé2021-03-051-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We will move this code in the next commit. Clean it up first to avoid checkpatch.pl errors. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210221222617.2579610-3-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * | target/arm: Restrict v8M IDAU to TCGPhilippe Mathieu-Daudé2021-03-052-7/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IDAU is specific to M-profile. KVM only supports A-profile. Restrict this interface to TCG, as it is pointless (and confusing) on a KVM-only build. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210221222617.2579610-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * | target/arm: Use TCF0 and TFSRE0 for unprivileged tag checksPeter Collingbourne2021-03-052-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Section D6.7 of the ARM ARM states: For the purpose of determining Tag Check Fault handling, unprivileged load and store instructions are treated as if executed at EL0 when executed at either: - EL1, when the Effective value of PSTATE.UAO is 0. - EL2, when both the Effective value of HCR_EL2.{E2H, TGE} is {1, 1} and the Effective value of PSTATE.UAO is 0. ARM has confirmed a defect in the pseudocode function AArch64.TagCheckFault that makes it inconsistent with the above wording. The remedy is to adjust references to PSTATE.EL in that function to instead refer to AArch64.AccessUsesEL(acctype), so that unprivileged instructions use SCTLR_EL1.TCF0 and TFSRE0_EL1. The exception type for synchronous tag check faults remains unchanged. This patch implements the described change by partially reverting commits 50244cc76abc and cc97b0019bb5. Signed-off-by: Peter Collingbourne <pcc@google.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219201820.2672077-1-pcc@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * | target/arm: Speed up aarch64 TBL/TBXRichard Henderson2021-03-054-84/+56Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Always perform one call instead of two for 16-byte operands. Use byte loads/stores directly into the vector register file instead of extractions and deposits to a 64-bit local variable. In order to easily receive pointers into the vector register file, convert the helper to the gvec out-of-line signature. Move the helper into vec_helper.c, where it can make use of H1 and clear_tail. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20210224230532.276878-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * | target/arm: Set ID_PFR2.SSBS to 1 for "max" 32-bit CPURebecca Cran2021-03-051-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable FEAT_SSBS for the "max" 32-bit CPU. Signed-off-by: Rebecca Cran <rebecca@nuviainc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210216224543.16142-4-rebecca@nuviainc.com [PMM: fix typo causing compilation failure] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * | target/arm: Enable FEAT_SSBS for "max" AARCH64 CPURebecca Cran2021-03-051-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | Set ID_AA64PFR1_EL1.SSBS to 2 and ID_PFR2.SSBS to 1. Signed-off-by: Rebecca Cran <rebecca@nuviainc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210216224543.16142-3-rebecca@nuviainc.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * | target/arm: Add support for FEAT_SSBS, Speculative Store Bypass SafeRebecca Cran2021-03-054-1/+69
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for FEAT_SSBS. SSBS (Speculative Store Bypass Safe) is an optional feature in ARMv8.0, and mandatory in ARMv8.5. Signed-off-by: Rebecca Cran <rebecca@nuviainc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210216224543.16142-2-rebecca@nuviainc.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* | | Merge remote-tracking branch 'remotes/cohuck-gitlab/tags/s390x-20210305' ↵Peter Maydell2021-03-054-3/+20
|\ \ \ | |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into staging some accumulated s390x fixes # gpg: Signature made Fri 05 Mar 2021 15:50:00 GMT # gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF # gpg: issuer "cohuck@redhat.com" # gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown] # gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full] # gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full] # gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown] # gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown] # Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF * remotes/cohuck-gitlab/tags/s390x-20210305: target/s390x/kvm: Simplify debug code vfio-ccw: Do not read region ret_code after write css: SCHIB measurement block origin must be aligned virtio-ccw: commands on revision-less devices s390x/pci: restore missing Query PCI Function CLP data hw/s390x: fix build for virtio-9p-ccw target/s390x/arch_dump: Fix warning for the name field in the PT_NOTE section s390x/cpu_model: disallow unpack for --only-migratable Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * | target/s390x/kvm: Simplify debug codePhilippe Mathieu-Daudé2021-03-041-2/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | We already have the 'run' variable holding 'cs->kvm_run' value. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210303182219.1631042-3-philmd@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
| * | css: SCHIB measurement block origin must be alignedPierre Morel2021-03-041-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Measurement Block Origin inside the SCHIB is used when Measurement Block format 1 is in used and must be aligned on 64 bytes otherwise an operand exception is recognized when issuing the Modify Sub CHannel (MSCH) instruction. Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <1613741973-3711-2-git-send-email-pmorel@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
| * | target/s390x/arch_dump: Fix warning for the name field in the PT_NOTE sectionThomas Huth2021-03-041-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a compiler warning with GCC 9.3 when compiling with the -fsanitize=thread compiler flag: In function 'strncpy', inlined from 's390x_write_elf64_notes' at ../target/s390x/arch_dump.c:219:9: /usr/include/x86_64-linux-gnu/bits/string_fortified.h:106:10: error: '__builtin_strncpy' specified bound 8 equals destination size [-Werror=stringop-truncation] Since the name should always be NUL-terminated, let's use g_strlcpy() to silence this warning. And while we're at it, also add an assert() to make sure that the provided names always fit the size field (which is fine for the current callers, the function is called once with "CORE" and once with "LINUX" as a name). Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-Id: <20210205093921.848260-1-thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
| * | s390x/cpu_model: disallow unpack for --only-migratableChristian Borntraeger2021-03-041-0/+10
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Secure execution (aka protected virtualization) guests cannot be migrated at the moment. If the unpack facility is provided in the cpu model, a guest may choose to transition to secure mode, making the guest unmigratable at that point in time. If the machine was explicitly started with --only-migratable, we would get a failure only when the guest actually tries to transition; instead, explicitly disallow the unpack facility if --only-migratable was specified to avoid late surprises. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Message-Id: <20210125135332.181324-1-borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
* | target-riscv: support QMP dump-guest-memoryYifei Jiang2021-03-045-0/+210
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the support needed for creating prstatus elf notes. This allows us to use QMP dump-guest-memory. Now ELF notes of RISC-V only contain prstatus elf notes. Signed-off-by: Yifei Jiang <jiangyifei@huawei.com> Signed-off-by: Mingwang Li <limingwang@huawei.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Message-id: 20210201124458.1248-2-jiangyifei@huawei.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
* | target/riscv: Declare csr_ops[] with a known sizeBin Meng2021-03-041-1/+1
|/ | | | | | | | | | | csr_ops[] is currently declared with an unknown size in cpu.h. Since the array size is known, let's do a complete declaration. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1611024723-14293-1-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
* Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into ↵Peter Maydell2021-03-023-3/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | staging * fix --enable-fuzzing linker failures (Alexander) * target/i386: Add bus lock debug exception support (Chenyi) * update documentation for preferred boolean option syntax (Daniel) * make SCSI io_timeout configurable (Hannes) * fix handling of guest recoverable SCSI errors (myself) * misc fixes (Pavel, Zheng Zhan Liang, Zihao) * fix installation of binaries with entitlements (Akihiko) # gpg: Signature made Thu 25 Feb 2021 14:41:56 GMT # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini-gitlab/tags/for-upstream: (29 commits) tcg/i386: rdpmc: fix the the condtions chardev: do not use short form boolean options in non-QemuOpts character device descriptions vl: deprecate -writeconfig target/i386: Add bus lock debug exception support qom/object.c: Fix typo target/i386: update to show preferred boolean syntax for -cpu docs: update to show preferred boolean syntax for -cpu docs: update to show preferred boolean syntax for -vnc docs: update to show preferred boolean syntax for -chardev qemu-options: update to show preferred boolean syntax for -vnc qemu-options: update to show preferred boolean syntax for -incoming qemu-options: update to show preferred boolean syntax for -netdev qemu-options: update to show preferred boolean syntax for -spice qemu-options: update to show preferred boolean syntax for -chardev gdbstub: use preferred boolean option syntax char: don't fail when client is not connected scsi: drop 'result' argument from command_complete callback scsi-disk: pass guest recoverable errors through even for rerror=stop scsi-disk: pass SCSI status to scsi_handle_rw_error scsi: introduce scsi_sense_from_errno() ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * tcg/i386: rdpmc: fix the the condtionsZheng Zhan Liang2021-02-251-1/+2
| | | | | | | | | | | | Signed-off-by: Zheng Zhan Liang <linuxmaker@163.com> Message-Id: <20210225054756.35962-1-linuxmaker@163.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
| * target/i386: Add bus lock debug exception supportChenyi Qiang2021-02-252-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Bus lock debug exception is a feature that can notify the kernel by generate an #DB trap after the instruction acquires a bus lock when CPL>0. This allows the kernel to enforce user application throttling or mitigations. This feature is enumerated via CPUID.(EAX=7,ECX=0).ECX[bit 24]. Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com> Message-Id: <20210202090224.13274-1-chenyi.qiang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-12-22 21:21:11 +0100