[icplus] Add driver for IC+ network card

Signed-off-by: Sylvie Barlow <sylvie.c.barlow@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>

3 files changed, 1016 insertions, 0 deletions

diff --git a/src/drivers/net/icplus.c b/src/drivers/net/icplus.c
new file mode 100644
index 00000000..4bed9242
--- /dev/null
+++ b/src/drivers/net/icplus.c
@@ -0,0 +1,809 @@
+/*
+ * Copyright (C) 2018 Sylvie Barlow <sylvie.c.barlow@gmail.com>.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ * You can also choose to distribute this program under the terms of
+ * the Unmodified Binary Distribution Licence (as given in the file
+ * COPYING.UBDL), provided that you have satisfied its requirements.
+ */
+
+FILE_LICENCE ( GPL2_OR_LATER_OR_UBDL );
+
+#include <stdint.h>
+#include <string.h>
+#include <unistd.h>
+#include <errno.h>
+#include <byteswap.h>
+#include <ipxe/netdevice.h>
+#include <ipxe/ethernet.h>
+#include <ipxe/if_ether.h>
+#include <ipxe/iobuf.h>
+#include <ipxe/malloc.h>
+#include <ipxe/pci.h>
+#include "icplus.h"
+
+/** @file
+ *
+ * IC+ network driver
+ *
+ */
+
+/******************************************************************************
+ *
+ * Device reset
+ *
+ ******************************************************************************
+ */
+
+/**
+ * Reset hardware
+ *
+ * @v icp		IC+ device
+ * @ret rc		Return status code
+ */
+static int icplus_reset ( struct icplus_nic *icp ) {
+	uint32_t asicctrl;
+	unsigned int i;
+
+	/* Trigger reset */
+	writel ( ( ICP_ASICCTRL_GLOBALRESET | ICP_ASICCTRL_DMA |
+		   ICP_ASICCTRL_FIFO | ICP_ASICCTRL_NETWORK | ICP_ASICCTRL_HOST |
+		   ICP_ASICCTRL_AUTOINIT ), ( icp->regs + ICP_ASICCTRL ) );
+
+	/* Wait for reset to complete */
+	for ( i = 0 ; i < ICP_RESET_MAX_WAIT_MS ; i++ ) {
+
+		/* Check if device is ready */
+		asicctrl = readl ( icp->regs + ICP_ASICCTRL );
+		if ( ! ( asicctrl & ICP_ASICCTRL_RESETBUSY ) )
+			return 0;
+
+		/* Delay */
+		mdelay ( 1 );
+	}
+
+	DBGC ( icp, "ICPLUS %p timed out waiting for reset (asicctrl %#08x)\n",
+	       icp, asicctrl );
+	return -ETIMEDOUT;
+}
+
+/******************************************************************************
+ *
+ * EEPROM interface
+ *
+ ******************************************************************************
+ */
+
+/**
+ * Read data from EEPROM
+ *
+ * @v nvs		NVS device
+ * @v address		Address from which to read
+ * @v data		Data buffer
+ * @v len		Length of data buffer
+ * @ret rc		Return status code
+ */
+static int icplus_read_eeprom ( struct nvs_device *nvs, unsigned int address,
+				void *data, size_t len ) {
+	struct icplus_nic *icp =
+		container_of ( nvs, struct icplus_nic, eeprom );
+	unsigned int i;
+	uint16_t eepromctrl;
+	uint16_t *data_word = data;
+
+	/* Sanity check.  We advertise a blocksize of one word, so
+	 * should only ever receive single-word requests.
+	 */
+	assert ( len == sizeof ( *data_word ) );
+
+	/* Initiate read */
+	writew ( ( ICP_EEPROMCTRL_OPCODE_READ |
+		   ICP_EEPROMCTRL_ADDRESS ( address ) ),
+		 ( icp->regs + ICP_EEPROMCTRL ) );
+
+	/* Wait for read to complete */
+	for ( i = 0 ; i < ICP_EEPROM_MAX_WAIT_MS ; i++ ) {
+
+		/* If read is not complete, delay 1ms and retry */
+		eepromctrl = readw ( icp->regs + ICP_EEPROMCTRL );
+		if ( eepromctrl & ICP_EEPROMCTRL_BUSY ) {
+			mdelay ( 1 );
+			continue;
+		}
+
+		/* Extract data */
+		*data_word = cpu_to_le16 ( readw ( icp->regs + ICP_EEPROMDATA ));
+		return 0;
+	}
+
+	DBGC ( icp, "ICPLUS %p timed out waiting for EEPROM read\n", icp );
+	return -ETIMEDOUT;
+}
+
+/**
+ * Write data to EEPROM
+ *
+ * @v nvs		NVS device
+ * @v address		Address to which to write
+ * @v data		Data buffer
+ * @v len		Length of data buffer
+ * @ret rc		Return status code
+ */
+static int icplus_write_eeprom ( struct nvs_device *nvs,
+				 unsigned int address __unused,
+				 const void *data __unused,
+				 size_t len __unused ) {
+	struct icplus_nic *icp =
+		container_of ( nvs, struct icplus_nic, eeprom );
+
+	DBGC ( icp, "ICPLUS %p EEPROM write not supported\n", icp );
+	return -ENOTSUP;
+}
+
+/**
+ * Initialise EEPROM
+ *
+ * @v icp		IC+ device
+ */
+static void icplus_init_eeprom ( struct icplus_nic *icp ) {
+
+	/* The hardware supports only single-word reads */
+	icp->eeprom.word_len_log2 = ICP_EEPROM_WORD_LEN_LOG2;
+	icp->eeprom.size = ICP_EEPROM_MIN_SIZE_WORDS;
+	icp->eeprom.block_size = 1;
+	icp->eeprom.read = icplus_read_eeprom;
+	icp->eeprom.write = icplus_write_eeprom;
+}
+
+/******************************************************************************
+ *
+ * MII interface
+ *
+ ******************************************************************************
+ */
+
+/** Pin mapping for MII bit-bashing interface */
+static const uint8_t icplus_mii_bits[] = {
+	[MII_BIT_MDC]	= ICP_PHYCTRL_MGMTCLK,
+	[MII_BIT_MDIO]	= ICP_PHYCTRL_MGMTDATA,
+	[MII_BIT_DRIVE]	= ICP_PHYCTRL_MGMTDIR,
+};
+
+/**
+ * Read input bit
+ *
+ * @v basher		Bit-bashing interface
+ * @v bit_id		Bit number
+ * @ret zero		Input is a logic 0
+ * @ret non-zero	Input is a logic 1
+ */
+static int icplus_mii_read_bit ( struct bit_basher *basher,
+				 unsigned int bit_id ) {
+	struct icplus_nic *icp = container_of ( basher, struct icplus_nic,
+						miibit.basher );
+	uint8_t mask = icplus_mii_bits[bit_id];
+	uint8_t reg;
+
+	DBG_DISABLE ( DBGLVL_IO );
+	reg = readb ( icp->regs + ICP_PHYCTRL );
+	DBG_ENABLE ( DBGLVL_IO );
+	return ( reg & mask );
+}
+
+/**
+ * Set/clear output bit
+ *
+ * @v basher		Bit-bashing interface
+ * @v bit_id		Bit number
+ * @v data		Value to write
+ */
+static void icplus_mii_write_bit ( struct bit_basher *basher,
+				   unsigned int bit_id, unsigned long data ) {
+	struct icplus_nic *icp = container_of ( basher, struct icplus_nic,
+						miibit.basher );
+	uint8_t mask = icplus_mii_bits[bit_id];
+	uint8_t reg;
+
+	DBG_DISABLE ( DBGLVL_IO );
+	reg = readb ( icp->regs + ICP_PHYCTRL );
+	reg &= ~mask;
+	reg |= ( data & mask );
+	writeb ( reg, icp->regs + ICP_PHYCTRL );
+	readb ( icp->regs + ICP_PHYCTRL ); /* Ensure write reaches chip */
+	DBG_ENABLE ( DBGLVL_IO );
+}
+
+/** MII bit-bashing interface */
+static struct bit_basher_operations icplus_basher_ops = {
+	.read = icplus_mii_read_bit,
+	.write = icplus_mii_write_bit,
+};
+
+/******************************************************************************
+ *
+ * Link state
+ *
+ ******************************************************************************
+ */
+
+/**
+ * Configure PHY
+ *
+ * @v icp		IC+ device
+ * @ret rc		Return status code
+ */
+static int icplus_init_phy ( struct icplus_nic *icp ) {
+	uint32_t asicctrl;
+	int rc;
+
+	/* Find PHY address */
+	if ( ( rc = mii_find ( &icp->mii ) ) != 0 ) {
+		DBGC ( icp, "ICPLUS %p could not find PHY address: %s\n",
+		       icp, strerror ( rc ) );
+		return rc;
+	}
+
+	/* Configure PHY to advertise 1000Mbps if applicable */
+	asicctrl = readl ( icp->regs + ICP_ASICCTRL );
+	if ( asicctrl & ICP_ASICCTRL_PHYSPEED1000 ) {
+		if ( ( rc = mii_write ( &icp->mii, MII_CTRL1000,
+					ADVERTISE_1000FULL ) ) != 0 ) {
+			DBGC ( icp, "ICPLUS %p could not advertise 1000Mbps: "
+			       "%s\n", icp, strerror ( rc ) );
+			return rc;
+		}
+	}
+
+	/* Reset PHY */
+	if ( ( rc = mii_reset ( &icp->mii ) ) != 0 ) {
+		DBGC ( icp, "ICPLUS %p could not reset PHY: %s\n",
+		       icp, strerror ( rc ) );
+		return rc;
+	}
+
+	return 0;
+}
+
+/**
+ * Check link state
+ *
+ * @v netdev		Network device
+ */
+static void icplus_check_link ( struct net_device *netdev ) {
+	struct icplus_nic *icp = netdev->priv;
+	uint8_t phyctrl;
+
+	/* Read link status */
+	phyctrl = readb ( icp->regs + ICP_PHYCTRL );
+	DBGC ( icp, "ICPLUS %p PHY control is %02x\n", icp, phyctrl );
+
+	/* Update network device */
+	if ( phyctrl & ICP_PHYCTRL_LINKSPEED ) {
+		netdev_link_up ( netdev );
+	} else {
+		netdev_link_down ( netdev );
+	}
+}
+
+/******************************************************************************
+ *
+ * Network device interface
+ *
+ ******************************************************************************
+ */
+
+/**
+ * Set descriptor ring base address
+ *
+ * @v icp		IC+ device
+ * @v offset		Register offset
+ * @v address		Base address
+ */
+static inline void icplus_set_base ( struct icplus_nic *icp, unsigned int offset,
+				     void *base ) {
+	physaddr_t phys = virt_to_bus ( base );
+
+	/* Program base address registers */
+	writel ( ( phys & 0xffffffffUL ),
+		 ( icp->regs + offset + ICP_BASE_LO ) );
+	if ( sizeof ( phys ) > sizeof ( uint32_t ) ) {
+		writel ( ( ( ( uint64_t ) phys ) >> 32 ),
+			 ( icp->regs + offset + ICP_BASE_HI ) );
+	} else {
+		writel ( 0, ( icp->regs + offset + ICP_BASE_HI ) );
+	}
+}
+
+/**
+ * Create descriptor ring
+ *
+ * @v icp		IC+ device
+ * @v ring		Descriptor ring
+ * @ret rc		Return status code
+ */
+static int icplus_create_ring ( struct icplus_nic *icp, struct icplus_ring *ring ) {
+	size_t len = ( sizeof ( ring->entry[0] ) * ICP_NUM_DESC );
+	int rc;
+	unsigned int i;
+	struct icplus_descriptor *desc;
+	struct icplus_descriptor *next;
+
+	/* Allocate descriptor ring */
+	ring->entry = malloc_dma ( len, ICP_ALIGN );
+	if ( ! ring->entry ) {
+		rc = -ENOMEM;
+		goto err_alloc;
+	}
+
+	/* Initialise descriptor ring */
+	memset ( ring->entry, 0, len );
+	for ( i = 0 ; i < ICP_NUM_DESC ; i++ ) {
+		desc = &ring->entry[i];
+		next = &ring->entry[ ( i + 1 ) % ICP_NUM_DESC ];
+		desc->next = cpu_to_le64 ( virt_to_bus ( next ) );
+		desc->flags = ( ICP_TX_UNALIGN | ICP_TX_INDICATE );
+		desc->control = ( ICP_TX_SOLE_FRAG | ICP_DONE );
+	}
+
+	/* Reset transmit producer & consumer counters */
+	ring->prod = 0;
+	ring->cons = 0;
+
+	DBGC ( icp, "ICP %p %s ring at [%#08lx,%#08lx)\n",
+	       icp, ( ( ring->listptr == ICP_TFDLISTPTR ) ? "TX" : "RX" ),
+	       virt_to_bus ( ring->entry ),
+	       ( virt_to_bus ( ring->entry ) + len ) );
+	return 0;
+
+	free_dma ( ring->entry, len );
+	ring->entry = NULL;
+ err_alloc:
+	return rc;
+}
+
+/**
+ * Destroy descriptor ring
+ *
+ * @v icp		IC+ device
+ * @v ring		Descriptor ring
+ */
+static void icplus_destroy_ring ( struct icplus_nic *icp __unused,
+				  struct icplus_ring *ring ) {
+	size_t len = ( sizeof ( ring->entry[0] ) * ICP_NUM_DESC );
+
+	/* Free descriptor ring */
+	free_dma ( ring->entry, len );
+	ring->entry = NULL;
+}
+
+/**
+ * Refill receive descriptor ring
+ *
+ * @v icp		IC+ device
+ */
+void icplus_refill_rx ( struct icplus_nic *icp ) {
+	struct icplus_descriptor *desc;
+	struct io_buffer *iobuf;
+	unsigned int rx_idx;
+	physaddr_t address;
+	unsigned int refilled = 0;
+
+	/* Refill ring */
+	while ( ( icp->rx.prod - icp->rx.cons ) < ICP_NUM_DESC ) {
+
+		/* Allocate I/O buffer */
+		iobuf = alloc_iob ( ICP_RX_MAX_LEN );
+		if ( ! iobuf ) {
+			/* Wait for next refill */
+			break;
+		}
+
+		/* Get next receive descriptor */
+		rx_idx = ( icp->rx.prod++ % ICP_NUM_DESC );
+		desc = &icp->rx.entry[rx_idx];
+
+		/* Populate receive descriptor */
+		address = virt_to_bus ( iobuf->data );
+	        desc->data.address = cpu_to_le64 ( address );
+		desc->data.len = cpu_to_le16 ( ICP_RX_MAX_LEN );
+		wmb();
+		desc->control = 0;
+
+		/* Record I/O buffer */
+		assert ( icp->rx_iobuf[rx_idx] == NULL );
+		icp->rx_iobuf[rx_idx] = iobuf;
+
+		DBGC2 ( icp, "ICP %p RX %d is [%llx,%llx)\n", icp, rx_idx,
+			( ( unsigned long long ) address ),
+			( ( unsigned long long ) address + ICP_RX_MAX_LEN ) );
+		refilled++;
+	}
+
+	/* Push descriptors to card, if applicable */
+	if ( refilled ) {
+		wmb();
+		writew ( ICP_DMACTRL_RXPOLLNOW, icp->regs + ICP_DMACTRL );
+	}
+}
+
+/**
+ * Open network device
+ *
+ * @v netdev		Network device
+ * @ret rc		Return status code
+ */
+static int icplus_open ( struct net_device *netdev ) {
+	struct icplus_nic *icp = netdev->priv;
+	int rc;
+
+	/* Create transmit descriptor ring */
+	if ( ( rc = icplus_create_ring ( icp, &icp->tx ) ) != 0 )
+		goto err_create_tx;
+
+	/* Create receive descriptor ring */
+	if ( ( rc = icplus_create_ring ( icp, &icp->rx ) ) != 0 )
+		goto err_create_rx;
+
+	/* Program descriptor base address */
+	icplus_set_base ( icp, icp->tx.listptr, icp->tx.entry );
+	icplus_set_base ( icp, icp->rx.listptr, icp->rx.entry );
+
+	/* Enable receive mode */
+	writew ( ( ICP_RXMODE_UNICAST | ICP_RXMODE_MULTICAST |
+		   ICP_RXMODE_BROADCAST | ICP_RXMODE_ALLFRAMES ),
+		 icp->regs + ICP_RXMODE );
+
+	/* Enable transmitter and receiver */
+	writel ( ( ICP_MACCTRL_TXENABLE | ICP_MACCTRL_RXENABLE |
+		   ICP_MACCTRL_DUPLEX ), icp->regs + ICP_MACCTRL );
+
+	/* Fill receive ring */
+	icplus_refill_rx ( icp );
+
+	/* Check link state */
+	icplus_check_link ( netdev );
+
+	return 0;
+
+	icplus_reset ( icp );
+	icplus_destroy_ring ( icp, &icp->rx );
+ err_create_rx:
+	icplus_destroy_ring ( icp, &icp->tx );
+ err_create_tx:
+	return rc;
+}
+
+/**
+ * Close network device
+ *
+ * @v netdev		Network device
+ */
+static void icplus_close ( struct net_device *netdev ) {
+	struct icplus_nic *icp = netdev->priv;
+	unsigned int i;
+
+	/* Perform global reset */
+	icplus_reset ( icp );
+
+	/* Destroy receive descriptor ring */
+	icplus_destroy_ring ( icp, &icp->rx );
+
+	/* Destroy transmit descriptor ring */
+	icplus_destroy_ring ( icp, &icp->tx );
+
+	/* Discard any unused receive buffers */
+	for ( i = 0 ; i < ICP_NUM_DESC ; i++ ) {
+		if ( icp->rx_iobuf[i] )
+			free_iob ( icp->rx_iobuf[i] );
+		icp->rx_iobuf[i] = NULL;
+	}
+}
+
+/**
+ * Transmit packet
+ *
+ * @v netdev		Network device
+ * @v iobuf		I/O buffer
+ * @ret rc		Return status code
+ */
+static int icplus_transmit ( struct net_device *netdev,
+			     struct io_buffer *iobuf ) {
+	struct icplus_nic *icp = netdev->priv;
+	struct icplus_descriptor *desc;
+	unsigned int tx_idx;
+	physaddr_t address;
+
+	/* Check if ring is full */
+	if ( ( icp->tx.prod - icp->tx.cons ) >= ICP_NUM_DESC ) {
+		DBGC ( icp, "ICP %p out of transmit descriptors\n", icp );
+		return -ENOBUFS;
+	}
+
+	/* Find TX descriptor entry to use */
+	tx_idx = ( icp->tx.prod++ % ICP_NUM_DESC );
+	desc = &icp->tx.entry[tx_idx];
+
+	/* Fill in TX descriptor */
+	address = virt_to_bus ( iobuf->data );
+	desc->data.address = cpu_to_le64 ( address );
+	desc->data.len = cpu_to_le16 ( iob_len ( iobuf ) );
+	wmb();
+	desc->control = ICP_TX_SOLE_FRAG;
+	wmb();
+
+	/* Ring doorbell */
+	writew ( ICP_DMACTRL_TXPOLLNOW, icp->regs + ICP_DMACTRL );
+
+	DBGC2 ( icp, "ICP %p TX %d is [%llx,%llx)\n", icp, tx_idx,
+		( ( unsigned long long ) address ),
+		( ( unsigned long long ) address + iob_len ( iobuf ) ) );
+	DBGC2_HDA ( icp, virt_to_phys ( desc ), desc, sizeof ( *desc ) );
+	return 0;
+}
+
+/**
+ * Poll for completed packets
+ *
+ * @v netdev		Network device
+ */
+static void icplus_poll_tx ( struct net_device *netdev ) {
+	struct icplus_nic *icp = netdev->priv;
+	struct icplus_descriptor *desc;
+	unsigned int tx_idx;
+
+	/* Check for completed packets */
+	while ( icp->tx.cons != icp->tx.prod ) {
+
+		/* Get next transmit descriptor */
+		tx_idx = ( icp->tx.cons % ICP_NUM_DESC );
+		desc = &icp->tx.entry[tx_idx];
+
+		/* Stop if descriptor is still in use */
+		if ( ! ( desc->control & ICP_DONE ) )
+			return;
+
+		/* Complete TX descriptor */
+		DBGC2 ( icp, "ICP %p TX %d complete\n", icp, tx_idx );
+		netdev_tx_complete_next ( netdev );
+		icp->tx.cons++;
+	}
+}
+
+/**
+ * Poll for received packets
+ *
+ * @v netdev		Network device
+ */
+static void icplus_poll_rx ( struct net_device *netdev ) {
+	struct icplus_nic *icp = netdev->priv;
+	struct icplus_descriptor *desc;
+	struct io_buffer *iobuf;
+	unsigned int rx_idx;
+	size_t len;
+
+	/* Check for received packets */
+	while ( icp->rx.cons != icp->rx.prod ) {
+
+		/* Get next transmit descriptor */
+		rx_idx = ( icp->rx.cons % ICP_NUM_DESC );
+		desc = &icp->rx.entry[rx_idx];
+
+		/* Stop if descriptor is still in use */
+		if ( ! ( desc->control & ICP_DONE ) )
+			return;
+
+		/* Populate I/O buffer */
+		iobuf = icp->rx_iobuf[rx_idx];
+		icp->rx_iobuf[rx_idx] = NULL;
+		len = le16_to_cpu ( desc->len );
+		iob_put ( iobuf, len );
+
+		/* Hand off to network stack */
+		if ( desc->flags & ( ICP_RX_ERR_OVERRUN | ICP_RX_ERR_RUNT |
+				     ICP_RX_ERR_ALIGN | ICP_RX_ERR_FCS |
+				     ICP_RX_ERR_OVERSIZED | ICP_RX_ERR_LEN ) ) {
+			DBGC ( icp, "ICP %p RX %d error (length %zd, "
+			       "flags %02x)\n", icp, rx_idx, len, desc->flags );
+			netdev_rx_err ( netdev, iobuf, -EIO );
+		} else {
+			DBGC2 ( icp, "ICP %p RX %d complete (length "
+				"%zd)\n", icp, rx_idx, len );
+			netdev_rx ( netdev, iobuf );
+		}
+		icp->rx.cons++;
+	}
+}
+
+/**
+ * Poll for completed and received packets
+ *
+ * @v netdev		Network device
+ */
+static void icplus_poll ( struct net_device *netdev ) {
+	struct icplus_nic *icp = netdev->priv;
+	uint16_t intstatus;
+	uint32_t txstatus;
+
+	/* Check for interrupts */
+	intstatus = readw ( icp->regs + ICP_INTSTATUS );
+
+	/* Poll for TX completions, if applicable */
+	if ( intstatus & ICP_INTSTATUS_TXCOMPLETE ) {
+		txstatus = readl ( icp->regs + ICP_TXSTATUS );
+		if ( txstatus & ICP_TXSTATUS_ERROR )
+			DBGC ( icp, "ICP %p TX error: %08x\n", icp, txstatus );
+		icplus_poll_tx ( netdev );
+	}
+
+	/* Poll for RX completions, if applicable */
+	if ( intstatus & ICP_INTSTATUS_RXDMACOMPLETE ) {
+		writew ( ICP_INTSTATUS_RXDMACOMPLETE, icp->regs + ICP_INTSTATUS );
+		icplus_poll_rx ( netdev );
+	}
+
+	/* Check link state, if applicable */
+	if ( intstatus & ICP_INTSTATUS_LINKEVENT ) {
+		writew ( ICP_INTSTATUS_LINKEVENT, icp->regs + ICP_INTSTATUS );
+		icplus_check_link ( netdev );
+	}
+
+	/* Refill receive ring */
+	icplus_refill_rx ( icp );
+}
+
+/**
+ * Enable or disable interrupts
+ *
+ * @v netdev		Network device
+ * @v enable		Interrupts should be enabled
+ */
+static void icplus_irq ( struct net_device *netdev, int enable ) {
+	struct icplus_nic *icp = netdev->priv;
+
+	DBGC ( icp, "ICPLUS %p does not yet support interrupts\n", icp );
+	( void ) enable;
+}
+
+/** IC+ network device operations */
+static struct net_device_operations icplus_operations = {
+	.open		= icplus_open,
+	.close		= icplus_close,
+	.transmit	= icplus_transmit,
+	.poll		= icplus_poll,
+	.irq		= icplus_irq,
+};
+
+/******************************************************************************
+ *
+ * PCI interface
+ *
+ ******************************************************************************
+ */
+
+/**
+ * Probe PCI device
+ *
+ * @v pci		PCI device
+ * @ret rc		Return status code
+ */
+static int icplus_probe ( struct pci_device *pci ) {
+	struct net_device *netdev;
+	struct icplus_nic *icp;
+	int rc;
+
+	/* Allocate and initialise net device */
+	netdev = alloc_etherdev ( sizeof ( *icp ) );
+	if ( ! netdev ) {
+		rc = -ENOMEM;
+		goto err_alloc;
+	}
+	netdev_init ( netdev, &icplus_operations );
+	icp = netdev->priv;
+	pci_set_drvdata ( pci, netdev );
+	netdev->dev = &pci->dev;
+	memset ( icp, 0, sizeof ( *icp ) );
+	icp->miibit.basher.op = &icplus_basher_ops;
+	init_mii_bit_basher ( &icp->miibit );
+	mii_init ( &icp->mii, &icp->miibit.mdio, 0 );
+	icp->tx.listptr = ICP_TFDLISTPTR;
+	icp->rx.listptr = ICP_RFDLISTPTR;
+
+	/* Fix up PCI device */
+	adjust_pci_device ( pci );
+
+	/* Map registers */
+	icp->regs = ioremap ( pci->membase, ICP_BAR_SIZE );
+	if ( ! icp->regs ) {
+		rc = -ENODEV;
+		goto err_ioremap;
+	}
+
+	/* Reset the NIC */
+	if ( ( rc = icplus_reset ( icp ) ) != 0 )
+		goto err_reset;
+
+	/* Initialise EEPROM */
+	icplus_init_eeprom ( icp );
+
+	/* Read EEPROM MAC address */
+	if ( ( rc = nvs_read ( &icp->eeprom, ICP_EEPROM_MAC,
+			       netdev->hw_addr, ETH_ALEN ) ) != 0 ) {
+		DBGC ( icp, "ICPLUS %p could not read EEPROM MAC address: %s\n",
+		       icp, strerror ( rc ) );
+		goto err_eeprom;
+	}
+
+	/* Configure PHY */
+	if ( ( rc = icplus_init_phy ( icp ) ) != 0 )
+		goto err_phy;
+
+	/* Register network device */
+	if ( ( rc = register_netdev ( netdev ) ) != 0 )
+		goto err_register_netdev;
+
+	/* Set initial link state */
+	icplus_check_link ( netdev );
+
+	return 0;
+
+	unregister_netdev ( netdev );
+ err_register_netdev:
+ err_phy:
+ err_eeprom:
+	icplus_reset ( icp );
+ err_reset:
+	iounmap ( icp->regs );
+ err_ioremap:
+	netdev_nullify ( netdev );
+	netdev_put ( netdev );
+ err_alloc:
+	return rc;
+}
+
+/**
+ * Remove PCI device
+ *
+ * @v pci		PCI device
+ */
+static void icplus_remove ( struct pci_device *pci ) {
+	struct net_device *netdev = pci_get_drvdata ( pci );
+	struct icplus_nic *icp = netdev->priv;
+
+	/* Unregister network device */
+	unregister_netdev ( netdev );
+
+	/* Reset card */
+	icplus_reset ( icp );
+
+	/* Free network device */
+	iounmap ( icp->regs );
+	netdev_nullify ( netdev );
+	netdev_put ( netdev );
+}
+
+/** IC+ PCI device IDs */
+static struct pci_device_id icplus_nics[] = {
+	PCI_ROM ( 0x13f0, 0x1023, "ip1000a",	"IP1000A", 0 ),
+};
+
+/** IC+ PCI driver */
+struct pci_driver icplus_driver __pci_driver = {
+	.ids = icplus_nics,
+	.id_count = ( sizeof ( icplus_nics ) / sizeof ( icplus_nics[0] ) ),
+	.probe = icplus_probe,
+	.remove = icplus_remove,
+};
diff --git a/src/drivers/net/icplus.h b/src/drivers/net/icplus.h
new file mode 100644
index 00000000..35fa422a
--- /dev/null
+++ b/src/drivers/net/icplus.h
@@ -0,0 +1,206 @@
+#ifndef _ICPLUS_H
+#define _ICPLUS_H
+
+/** @file
+ *
+ * IC+ network driver
+ *
+ */
+
+#include <ipxe/nvs.h>
+#include <ipxe/mii_bit.h>
+
+FILE_LICENCE ( GPL2_OR_LATER_OR_UBDL );
+
+/** BAR size */
+#define ICP_BAR_SIZE 0x200
+
+/** Alignment requirement */
+#define ICP_ALIGN 0x8
+
+/** Base address low register offset */
+#define ICP_BASE_LO 0x0
+
+/** Base address high register offset */
+#define ICP_BASE_HI 0x4
+
+/** ASIC control register (double word) */
+#define ICP_ASICCTRL 0x30
+#define ICP_ASICCTRL_PHYSPEED1000	0x00000040UL	/**< PHY speed 1000 */
+#define ICP_ASICCTRL_GLOBALRESET	0x00010000UL	/**< Global reset */
+#define ICP_ASICCTRL_DMA		0x00080000UL	/**< DMA */
+#define ICP_ASICCTRL_FIFO		0x00100000UL	/**< FIFO */
+#define ICP_ASICCTRL_NETWORK		0x00200000UL	/**< Network */
+#define ICP_ASICCTRL_HOST		0x00400000UL	/**< Host */
+#define ICP_ASICCTRL_AUTOINIT		0x00800000UL	/**< Auto init */
+#define ICP_ASICCTRL_RESETBUSY		0x04000000UL	/**< Reset busy */
+
+/** Maximum time to wait for reset */
+#define ICP_RESET_MAX_WAIT_MS 1000
+
+/** DMA control register (word/double word) */
+#define ICP_DMACTRL 0x00
+#define ICP_DMACTRL_RXPOLLNOW		0x0010		/**< Receive poll now */
+#define ICP_DMACTRL_TXPOLLNOW 		0x1000		/**< Transmit poll now */
+
+/** EEPROM control register (word) */
+#define ICP_EEPROMCTRL 0x4a
+#define ICP_EEPROMCTRL_ADDRESS( x )	( (x) << 0 )	/**< Address */
+#define ICP_EEPROMCTRL_OPCODE( x )	( (x) << 8 )	/**< Opcode */
+#define ICP_EEPROMCTRL_OPCODE_READ \
+	ICP_EEPROMCTRL_OPCODE ( 2 )			/**< Read register */
+#define ICP_EEPROMCTRL_BUSY		0x8000		/**< EEPROM busy */
+
+/** Maximum time to wait for reading EEPROM */
+#define ICP_EEPROM_MAX_WAIT_MS 1000
+
+/** EEPROM word length */
+#define ICP_EEPROM_WORD_LEN_LOG2 1
+
+/** Minimum EEPROM size, in words */
+#define ICP_EEPROM_MIN_SIZE_WORDS 0x20
+
+/** Address of MAC address within EEPROM */
+#define ICP_EEPROM_MAC 0x10
+
+/** EEPROM data register (word) */
+#define ICP_EEPROMDATA 0x48
+
+/** Interupt status register (word) */
+#define ICP_INTSTATUS 0x5e
+#define ICP_INTSTATUS_TXCOMPLETE	0x0004		/**< TX complete */
+#define ICP_INTSTATUS_LINKEVENT		0x0100		/**< Link event */
+#define ICP_INTSTATUS_RXDMACOMPLETE	0x0400		/**< RX DMA complete */
+
+/** MAC control register (double word) */
+#define ICP_MACCTRL 0x6c
+#define ICP_MACCTRL_DUPLEX		0x00000020UL	/**< Duplex select */
+#define ICP_MACCTRL_TXENABLE		0x01000000UL	/**< TX enable */
+#define ICP_MACCTRL_TXDISABLE		0x02000000UL	/**< TX disable */
+#define ICP_MACCTRL_RXENABLE		0x08000000UL	/**< RX enable */
+#define ICP_MACCTRL_RXDISABLE		0x10000000UL	/**< RX disable */
+
+/** PHY control register (byte) */
+#define ICP_PHYCTRL 0x76
+#define ICP_PHYCTRL_MGMTCLK		0x01		/**< Management clock */
+#define ICP_PHYCTRL_MGMTDATA		0x02		/**< Management data */
+#define ICP_PHYCTRL_MGMTDIR		0x04		/**< Management direction */
+#define ICP_PHYCTRL_LINKSPEED		0xc0		/**< Link speed */
+
+/** Receive mode register (word) */
+#define ICP_RXMODE 0x88
+#define ICP_RXMODE_UNICAST		0x0001		/**< Receive unicast */
+#define ICP_RXMODE_MULTICAST		0x0002		/**< Receice multicast */
+#define ICP_RXMODE_BROADCAST		0x0004		/**< Receive broadcast */
+#define ICP_RXMODE_ALLFRAMES		0x0008		/**< Receive all frames */
+
+/** List pointer receive register */
+#define ICP_RFDLISTPTR 0x1c
+
+/** List pointer transmit register */
+#define ICP_TFDLISTPTR 0x10
+
+/** Transmit status register */
+#define ICP_TXSTATUS 0x60
+#define ICP_TXSTATUS_ERROR		0x00000001UL	/**< TX error */
+
+/** Data fragment */
+union icplus_fragment {
+	/** Address of data */
+	uint64_t address;
+	/** Length */
+	struct {
+		/** Reserved */
+		uint8_t reserved[6];
+		/** Length of data */
+		uint16_t len;
+	};
+};
+
+/** Transmit or receive descriptor */
+struct icplus_descriptor {
+	/** Address of next descriptor */
+	uint64_t next;
+	/** Actual length */
+	uint16_t len;
+	/** Flags */
+	uint8_t flags;
+	/** Control */
+	uint8_t control;
+	/** VLAN */
+	uint16_t vlan;
+	/** Reserved */
+	uint16_t reserved_a;
+	/** Data buffer */
+	union icplus_fragment data;
+	/** Reserved */
+	uint8_t reserved_b[8];
+};
+
+/** Descriptor complete */
+#define ICP_DONE 0x80
+
+/** Transmit alignment disabled */
+#define ICP_TX_UNALIGN 0x01
+
+/** Request transmit completion */
+#define ICP_TX_INDICATE 0x40
+
+/** Sole transmit fragment */
+#define ICP_TX_SOLE_FRAG 0x01
+
+/** Recieve frame overrun error */
+#define ICP_RX_ERR_OVERRUN 0x01
+
+/** Receive runt frame error */
+#define ICP_RX_ERR_RUNT 0x02
+
+/** Receive alignment error */
+#define ICP_RX_ERR_ALIGN 0x04
+
+/** Receive FCS error */
+#define ICP_RX_ERR_FCS 0x08
+
+/** Receive oversized frame error */
+#define ICP_RX_ERR_OVERSIZED 0x10
+
+/** Recieve length error */
+#define ICP_RX_ERR_LEN 0x20
+
+/** Descriptor ring */
+struct icplus_ring {
+	/** Producer counter */
+	unsigned int prod;
+	/** Consumer counter */
+	unsigned int cons;
+	/** Ring entries */
+	struct icplus_descriptor *entry;
+	/* List pointer register */
+	unsigned int listptr;
+};
+
+/** Number of descriptors */
+#define ICP_NUM_DESC 4
+
+/** Maximum receive packet length */
+#define ICP_RX_MAX_LEN ETH_FRAME_LEN
+
+/** An IC+ network card */
+struct icplus_nic {
+	/** Registers */
+	void *regs;
+	/** EEPROM */
+	struct nvs_device eeprom;
+	/** MII bit bashing interface */
+	struct mii_bit_basher miibit;
+	/** MII device */
+	struct mii_device mii;
+	/** Transmit descriptor ring */
+	struct icplus_ring tx;
+	/** Receive descriptor ring */
+	struct icplus_ring rx;
+	/** Receive I/O buffers */
+	struct io_buffer *rx_iobuf[ICP_NUM_DESC];
+};
+
+#endif /* _ICPLUS_H */
diff --git a/src/include/ipxe/errfile.h b/src/include/ipxe/errfile.h
index e465d188..8e989e42 100644
--- a/src/include/ipxe/errfile.h
+++ b/src/include/ipxe/errfile.h
@@ -203,6 +203,7 @@ FILE_LICENCE ( GPL2_OR_LATER_OR_UBDL );
 #define ERRFILE_smscusb		     ( ERRFILE_DRIVER | 0x00c70000 )
 #define ERRFILE_lan78xx		     ( ERRFILE_DRIVER | 0x00c80000 )
 #define ERRFILE_ena		     ( ERRFILE_DRIVER | 0x00c90000 )
+#define ERRFILE_icplus		     ( ERRFILE_DRIVER | 0x00ca0000 )
 
 #define ERRFILE_aoe			( ERRFILE_NET | 0x00000000 )
 #define ERRFILE_arp			( ERRFILE_NET | 0x00010000 )