|
|
#!/bin/ash
# -----------------------------------------------------------------------------
#
# Copyright (c) 2007..2018 bwLehrpool-Projektteam
#
# This program/file is free software distributed under the GPL version 2.
# See https://www.gnu.org/licenses/old-licenses/gpl-2.0-standalone.html
#
# If you have any feedback please consult https://bwlehrpool.de and
# send your feedback to bwlehrpool@hs-offenburg.de.
#
# General information about bwLehrpool can be found at https://bwlehrpool.de
#
# -----------------------------------------------------------------------------
# systemd-vmchooser_env
# - This is the preparation script for the configuration of the virtuali-
# zation tools used later on.
# - This creates '$VMCHOOSER_CONF_DIR/virtualization.conf' that is later
# evaluated by the runvirt script.
################################################################################
################################################################################
### Define default dirs / get configs
################################################################################
export PATH=$PATH:/opt/openslx/bin:/opt/openslx/sbin
# source config file with vars (e.g. ipaddr, macaddr, HOSTNAME)
. /opt/openslx/config
# from plugins/vmchooser/XX_vmchooser.sh
VMCHOOSER_DIR="/opt/openslx/vmchooser"
VMCHOOSER_CONF_DIR="${VMCHOOSER_DIR}/config"
VMCHOOSER_VIRT_CONF="${VMCHOOSER_CONF_DIR}/virtualization.conf"
# Same as in service file for udhcpd
DHCP_NAT_CONF="${VMCHOOSER_CONF_DIR}/udhcpd-nat1.conf"
echo "# Generated $(date)" > "$VMCHOOSER_VIRT_CONF"
# setup more scratch space for virtual machines, if configured
for DIR in /tmp/virt /var/log/samba /run/samba; do
if ! mkdir -p "$DIR"; then
echo "Could not create '$DIR'!"
exit 1
fi
done
# check if a fallback share is set as SLX_VM_TMP_SOURCE
if [ -n "${SLX_VM_TMP_SOURCE}" ]; then
LOG=$(mktemp)
# use SLX_VM_TMP_TYPE and SLX_VM_TMP_OPTS, if set
for TRY in 1 2 3 STOP; do
[ "x$TRY" = "xSTOP" ] && break
if [ -n "${SLX_VM_TMP_TYPE}" ] && [ -n "${SLX_VM_TMP_OPTS}" ]; then
mount -t "${SLX_VM_TMP_TYPE}" -o "${SLX_VM_TMP_OPTS}" "${SLX_VM_TMP_SOURCE}" /tmp/virt
elif [ -n "${SLX_VM_TMP_TYPE}" ]; then
mount -t "${SLX_VM_TMP_TYPE}" "${SLX_VM_TMP_SOURCE}" /tmp/virt
elif [ -n "${SLX_VM_TMP_OPTS}" ]; then
mount -o "${SLX_VM_TMP_OPTS}" "${SLX_VM_TMP_SOURCE}" /tmp/virt
else
mount "${SLX_VM_TMP_SOURCE}" /tmp/virt
fi
RET=$?
[ "$RET" = "0" ] && break
sleep $TRY
done > "$LOG" 2>&1
if [ "$RET" -ne "0" ]; then
if [ -s "$LOG" ]; then
slxlog --delete "mount-vm-tmp-fail" "Mounting of '${SLX_VM_TMP_SOURCE}' failed." "$LOG"
else
slxlog "mount-vm-tmp-fail" "Mounting of '${SLX_VM_TMP_SOURCE}' failed."
rm -f -- "$LOG"
fi
fi
fi
chmod a+rwxt /tmp/virt
# enable normal users to setup the extended virtual machine redo file space
# and image source via network block device (NBD only at the moment)
# allow to start/stop samba on virtual devices (latter one ignores multiple
# independent daemons)
#cat >> /mnt/etc/sudoers << EOF
# allow to start and stop the special /tmp redo file space (RAM + NBD/NFS server RAID)
#ALL ALL=NOPASSWD: /sbin/losetup /dev/loop*
#ALL ALL=NOPASSWD: /sbin/mdadm -C /dev/md0 -l linear --raid-devices=2 /dev/loop* /dev/*
#ALL ALL=NOPASSWD: /opt/openslx/rootfs/usr/sbin/nbd-client * * /dev/nbd*
# allow to configure and start/stop samba services
#ALL ALL=NOPASSWD: /opt/openslx/rootfs/bin/sed -i /etc/*/smb.conf -e *
#ALL ALL=NOPASSWD: /usr/sbin/nmbd -s /etc/*/smb.conf
#ALL ALL=NOPASSWD: /usr/sbin/smbd -s /etc/*/smb.conf
#ALL ALL=NOPASSWD: /opt/openslx/rootfs/usr/bin/killall nmbd smbd
#EOF
################################################################################
echo "Determine host's hardware configuration"
################################################################################
# general machine architecture (32/64bit)
echo "HOST_ARCH=$(uname -m)" >> "${VMCHOOSER_VIRT_CONF}"
# generated mac address parts from the host's mac address
if [ -n "$SLX_PXE_MAC" ]; then
HOSTMACADDR="${SLX_PXE_MAC}"
else ## Fallback:
HOSTMACADDR="$(ip a | grep ether | grep -o -E -i '([0-9a-f]{2}:){5}[0-9a-f]{2}' | head -n 1)"
fi
echo "HOSTMACADDR='$HOSTMACADDR'" >> "${VMCHOOSER_VIRT_CONF}"
# NG: we define 10 fixed prefixes (00:FF:00 -> 00:FF:09) to use for VMs
# First, check if the first 3 bytes of the host's mac address is
# contained in our list. If it is, use the next one in the list.
# If not, or the host's prefix is the last one in the list, use the first one.
# This lays the groundwork to avoid mac addresses collisions in nested operations.
MACADDRPREFIX=
for i in 0 1 2 3 4 5 6 7 8; do
if [ "x${HOSTMACADDR#00:FF:0$i}" != "x${HOSTMACADDR}" ]; then
# current prefix is indeed part of the host's mac address
# use the next prefix if != 9
MACADDRPREFIX="00:FF:0$(( i + 1 ))"
break
fi
done
# if it is still unset, then either the host's prefix did not match any in the list
# or it matched the 9th. Either way, use the first prefix for this level of VMs.
[ -n "${MACADDRPREFIX}" ] || MACADDRPREFIX='00:FF:00'
# grab the last 2 bytes of the host's mac and prepend our VMID
# placeholder (later replaced used by run-virt).
MACADDRSUFFIX="$( printf "%s" "$HOSTMACADDR" | awk -F ":" '{print "%VMID%:" $(NF-1) ":" $NF}' | tr 'a-z' 'A-Z' )"
{ # ### stdout redirect start
echo "MACADDRPREFIX='$MACADDRPREFIX'"
echo "MACADDRSUFFIX='$MACADDRSUFFIX'"
# read in ip address
echo "HOSTIP=${SLX_PXE_CLIENT_IP}"
# hostname
echo "HOSTNAME='$( hostname -s )'"
# get further hw information and check for traces of available optical and floppy drives
j=0
for CDROM in $(dmesg|grep -i "Attached scsi CD-ROM sr" | sed "s,.*Attached scsi CD-ROM ,,"); do
echo "CDROM_${j}=/dev/${CDROM}"
j="$( j + 1 )"
done
j=0
for FLOPPY in $(dmesg|grep -i "Floppy drive"|sed "s,.*(s): ,,;s, is .*,,"); do
echo "FLOPPY_${j}=/dev/${FLOPPY}"
j="$( j + 1 )"
done
# Serial ports
echo "SERIAL_PORTS='$(dmesg | grep -Eo 'ttyS[0-9]+' | sed 's,^,/dev/,' | tr '\n' ' ')'"
} >> "${VMCHOOSER_VIRT_CONF}" # ### redirect end
# Parallel ports
modprobe parport_pc
################################################################################
echo "Setup VM networking"
################################################################################
# there will be three types of network interfaces for virtual machines available
# all will be configured for every type of virtualization tool
# a) br0 is the direct host bridge into the local LAN (br0 already exists)
# vmnet0 for VMware
# vboxnet0 for VirtualBox
# kvmnet0* for Qemu/KVM
# b) nat1 is an internal bridge which "NATes" into the local LAN (with DHCP)
# vmnet1 for VMware
# vboxnet1 for VirtualBox
# kvmnet1* for Qemu/KVM
# c) vsw2 is an internal host bridge to connect software defined LANs to
# vmnet2 for VMware
# vboxnet2 for VirtualBox
# kvmnet2* for Qemu/KVM
# creating and configuring nat0
# 192.168.101.0/24 is vm nat. If you ever change this there are a couple of other files
# where you'd need to make changes, so think twice before doing so. ;)
brctl addbr nat1
ip link set dev nat1 up
ip addr add 192.168.101.1/24 dev nat1
echo "1" >/proc/sys/net/ipv4/conf/nat1/forwarding
echo "1" >/proc/sys/net/ipv4/conf/br0/forwarding 2>/dev/null
# iptables masquerade rule is now inserted by /opt/openslx/iptables/rules.d/50-virt-nat1-masquerading
FALLBACK_DOMAIN="virtual.localnet"
getips () {
[ -z "$1" ] && return
[ "$1" = "$FALLBACK_DOMAIN" ] && return
# Output in one line by using echo without quotes
echo $(busybox timeout -t 2 nslookup "$1" 2>/dev/null | grep -A 4 '^Name:' | grep -E '^Address\s*[0-9]*: ' | awk -F': ' '{print $2}' | grep -oE '[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+' | awk '{print $1}')
}
# read the DNS configuration and configure the udhcpd
[ -z "${SLX_DNS}" ] && SLX_DNS="8.8.8.8 8.8.4.4"
[ -z "${SLX_NET_DOMAIN}" ] && SLX_NET_DOMAIN="$FALLBACK_DOMAIN"
[ -z "${SLX_NET_SEARCH}" ] && SLX_NET_SEARCH="$FALLBACK_DOMAIN"
# WINS - if not supplied, try to get it from the search base of our ldap config
if [ -z "${SLX_NET_WINS}" ]; then
DC=$(grep -m1 -i '^BASE\s*DC=' "/etc/ldap.conf" | grep -o -i 'DC=.*' | sed -r 's/\s*,\s*DC=/./gI;s/^\s*DC=//I')
[ -z "$DC" ] && DC=$(grep -m1 -i '^ldap_search_base\s*=\s*DC=' "/etc/sssd/sssd.conf" | grep -o -i 'DC=.*' | sed -r 's/\s*,\s*DC=/./gI;s/^\s*DC=//I')
[ -n "$DC" ] && SLX_NET_WINS=$(getips "$DC")
fi
# NTP - default to pool.ntp.org
NTPSRV=
[ -z "$SLX_NTP_SERVER" ] && SLX_NTP_SERVER="pool.ntp.org"
for ips in $SLX_NTP_SERVER; do
if ! printf "%s" "$ips" | grep -qE '^[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+$'; then
ips="$( getips "$ips" )"
[ -z "$ips" ] && continue
fi
NTPSRV="$NTPSRV $ips"
done
[ -z "$NTPSRV" ] && NTPSRV="0.0.0.0"
[ -z "${SLX_NET_WINS}" ] && SLX_NET_WINS=$(getips "$SLX_NET_DOMAIN")
[ -z "${SLX_NET_WINS}" ] && SLX_NET_WINS="0.0.0.0"
sed "s#%DNSSERVER%#${SLX_DNS}#;s#%DOMAIN%#${SLX_NET_DOMAIN}#;s#%SEARCH%#${SLX_NET_SEARCH}#;s#%WINS%#${SLX_NET_WINS}#;s#%NTPSERVER%#${NTPSRV}#" "${DHCP_NAT_CONF}.template" > "${DHCP_NAT_CONF}"
# Make sure the primary vm running (we most likely never run more than one at a time anyways) always gets the same ip
echo "static_lease $(echo "$MACADDRPREFIX:$MACADDRSUFFIX" | sed 's/%VMID%/01/') 192.168.101.20" >> "${DHCP_NAT_CONF}"
mkdir -p /var/lib/udhcpd
# creating and configuring vsw2
brctl addbr vsw2
ip link set dev vsw2 up
echo "1" >/proc/sys/net/ipv4/conf/vsw2/forwarding
# estimate free mem during clean boot
# TODO: Does that even make sense? We determine available memory during bootup and then blindly use
# this value to configure the VM's memory size later on. Shouldn't we query this right before starting the VM?
MEM_TOTAL="$( awk '{if ($1 == "MemAvailable:") { print $2; exit; }}' /proc/meminfo )"
[ -z "$MEM_TOTAL" ] && MEM_TOTAL=2048000
echo "HOST_MEM_TOTAL=$(( MEM_TOTAL / 1024 ))" >> "${VMCHOOSER_VIRT_CONF}"
exit 0
|
