[pam-common-share] Remove unused module

3 files changed, 0 insertions, 203 deletions

diff --git a/core/modules/pam-common-share/data/opt/openslx/scripts/pam_script_mount_common_share b/core/modules/pam-common-share/data/opt/openslx/scripts/pam_script_mount_common_share
deleted file mode 100644
index d0bd8842..00000000
--- a/core/modules/pam-common-share/data/opt/openslx/scripts/pam_script_mount_common_share
+++ /dev/null
@@ -1,184 +0,0 @@
-###################################################################
-#
-#		This script is a part of the pam_script_auth script
-#		and is not stand-alone!
-#
-#		It will try to mount the common shares specified in the
-#		variables of the global slx config '/opt/openslx/config'.
-#		An arbitrary number of shares may be given. Every share
-#		requires following bundle of variables:
-#
-#
-#		SLX_SHARE_<id>_AUTH_TYPE		[guest|user|pam]
-#		SLX_SHARE_<id>_AUTH_USER		<username>
-#		SLX_SHARE_<id>_AUTH_PASS		<password>
-#		SLX_SHARE_<id>_PERM				[ro|rw]
-#		SLX_SHARE_<id>_PATH				<path_to_share>
-#
-#		Note: <id> is the identifier of the share.
-#
-#		Example:
-#			SLX_SHARE_0_PATH='//windows.server/sharename'
-#			SLX_SHARE_0_AUTH_TYPE='user'
-#			SLX_SHARE_0_AUTH_USER='shareuser'
-#			SLX_SHARE_0_AUTH_PASS='sharepass'
-#			SLX_SHARE_0_PERM='rw'
-#
-#		Note:	If AUTH_TYPE is set to 'pam' or 'guest', then
-#				there is no need to specify AUTH_USER or AUTH_PASS
-#				as it is obviously not needed.
-#
-###################################################################
-#
-# Internal helper function to mount a share
-# usage: mount_share <auth_type> <auth_user> <auth_password> <permissions> <path> <share_number>
-mount_share() {
-	# since we are (hopefully) the only one using this function, we know we need excatly 6 args
-	[ $# -ne 6 ] && { slxlog "pam-share-args" "Wrong number of arguments given! Need 6, $# given."; return; }
-
-	# lets check if we have our variables
-	local SHARE_AUTH_TYPE="$1"
-	local SHARE_AUTH_USER="$2"
-	local SHARE_AUTH_PASS="$3"
-	local SHARE_PERM="$4"
-	local SHARE_PATH="$5"
-	local SHARE_NUM="$6"
-
-	# unless specified otherwise, mount the share read-only
-	[ "x${SHARE_PERM}" != "xrw" ] && SHARE_PERM='ro'
-
-	# all good: now we can mount depending on the type
-	# supports: cifs?/nfs?
-	if [ "${SHARE_PATH:0:2}" = "//" ]; then
-		# '//' prefixed, assume windows share
-		# prepare common mount options for either authentication type
-		MOUNT_OPTS="-t cifs -o nounix,uid=${USER_UID},gid=${USER_GID},forceuid,forcegid,nobrl,noacl,$SHARE_PERM"
-
-		# now construct the mount options depending on the type of the share.
-		if [ "${SHARE_AUTH_TYPE}" = "guest" ]; then
-			MOUNT_OPTS="${MOUNT_OPTS},guest,file_mode=0777,dir_mode=0777"
-		elif [ "${SHARE_AUTH_TYPE}" = "pam" ]; then
-			export USER="${PAM_USER}"
-			export PASSWD="${PAM_AUTHTOK}"
-			MOUNT_OPTS="${MOUNT_OPTS},sec=ntlm,file_mode=0700,dir_mode=0700"
-		elif [ "${SHARE_AUTH_TYPE}" = "user" ]; then
-			# check if credentials are set
-			[ ! -z "${SHARE_AUTH_USER}" ] || \
-				{ slxlog "pam-share-noauthuser" "Share${SHARE_NUM}: No variable 'SLX_SHARE_${SHARE_NUM}_AUTH_USER' found in config!"; return; }
-			# now export them to the env
-			export USER="${SHARE_AUTH_USER}"
-			export PASSWD="${SHARE_AUTH_PASS}"
-			MOUNT_OPTS="${MOUNT_OPTS},sec=ntlm,file_mode=0700,dir_mode=0700"
-		else
-			slxlog "pam-share-auth" "Share${SHARE_NUM}: Auth type '${SHARE_AUTH_TYPE}' not supported."
-			return;
-		fi
-	else
-		# for now assume NFS-Share, start build options string with default options for all shares
-		MOUNT_OPTS="-t nfs -o async,nolock"
-
-		# TODO: here we will have to evaluate options of NFS-shares
-
-		# unless specified otherwise, mount the share read-only
-		[ "x${SHARE_PERM}" != "xrw" ] && SHARE_PERM='ro'
-		MOUNT_OPTS="${MOUNT_OPTS},${SHARE_PERM}"
-	fi
-
-	############################################################################
-	#
-	#  Following code is independent of the type of share.
-	#  The variable MOUNT_OPTS should have been set correctly
-	#  up to this point.
-	#
-	############################################################################
-
-	# we just mount it to the directory with the same name as the
-	# last directory in the path name of the share
-	# e.g. //windows.net/lehrpool -> ${COMMON_SHARE_MOUNT_POINT}/lehrpool
-	local TARGET_DIR="${COMMON_SHARE_MOUNT_POINT}/$(basename ${SHARE_PATH})"
-	# it exists, so let's create ${COMMON_SHARE_MOUNT_POINT}/lehrpool_${SHARE_NUM}
-	[ -d "${TARGET_DIR}" ] && TARGET_DIR="${TARGET_DIR}_${SHARE_NUM}"
-
-	# at this point is TARGET_DIR pointing to the right directory.
-	mkdir -p "${TARGET_DIR}" || \
-	{ slxlog "pam-share-mkdirfail" "Share${SHARE_NUM}: Could not create directory '${TARGET_DIR}'. Skipping share."; return; }
-
-	# flag for failure
-	SIGNAL=$(mktemp)
-	rm -f -- "${SIGNAL}"
-	# output of command
-	MOUNT_OUTPUT=$(mktemp)
-	# now try to mount it
-	( mount ${MOUNT_OPTS} "${SHARE_PATH}" "${TARGET_DIR}" > "${MOUNT_OUTPUT}" 2>&1 || touch "${SIGNAL}" ) &
-	MOUNT_PID=$!
-	for COUNTER in 1 1 2 4; do
-	kill -0 "${MOUNT_PID}" 2>/dev/null || break
-	sleep "${COUNTER}"
-	done
-
-	# check for failures
-	if [ -e "${SIGNAL}" ]; then
-		slxlog --delete "pam-share-mount" "Mount of '${SHARE_PATH}' to '${TARGET_DIR}' failed. (Args: '${MOUNT_OPTS}')" "${MOUNT_OUTPUT}"
-		rm -f -- "${SIGNAL}"
-	elif kill -9 "${MOUNT_PID}" 2>/dev/null; then
-		slxlog --delete "pam-share-mount" "Mount of '${SHARE_PATH}' to '${TARGET_DIR}' timed out. (Args: '${MOUNT_OPTS}')" "${MOUNT_OUTPUT}"
-	else
-		rm -f -- "${MOUNT_OUTPUT}"
-	fi
-
-	# always unset credentials
-	unset USER
-	unset PASSWD
-}
-
-############################################################################
-#
-#  MAIN LOGIC OVER ALL SHARES
-#
-############################################################################
-# at this point we need the slx config to do anything
-[ -e "/opt/openslx/config" ] || \
-	{ slxlog "pam-share-noconfig" "File '/opt/openslx/config' not found."; return; }
-
-# we have it as we should, source it
-. /opt/openslx/config || \
-	{ slxlog "pam-share-sourceconfig" "Could not source '/opt/openslx/config'."; return; }
-
-#
-#
-#
-# Since many shares can be specified, we need to identify how many we have first.
-# We just go over all SLX_SHARE_* variables and check for those ending in _PATH.
-# So e.g. for SLX_SHARE_0_PATH=<path> the SHARE variable would be equal to 'SLX_SHARE_0_PATH'
-# For each of those, a share was specified and we will try to mount it.
-for SHARE in $(grep -E '^SLX_SHARE_[0-9]+_PATH=.*$' /opt/openslx/config); do
-	# first let's check if we have already mounted it and skip if it is
-	# TODO: this should be good enough? stronger checks?
-	if mount | grep -q "$(echo ${SHARE} | awk -F '=' '{print $2}' | tr -d \'\")"; then
-		# already mounted, just skip
-		# this should not happen anyway, since the pam_script_auth script also exits
-		# if the temporary home user directory is already mounted...
-		continue
-	fi
-	# ok so we have the full declaration command in $SHARE,
-	# let's extract the number of the share.
-	# i.e. SLX_SHARE_0_PATH -> share number 0
-	# first just cut everything after '='
-	SHARE_ID="$(echo $SHARE | awk -F '=' '{print $1}')"
-	# now strip the leading SLX_SHARE_
-	SHARE_ID=${SHARE_ID#SLX_SHARE_}
-	# now remove the trailing _PATH
-	SHARE_ID=${SHARE_ID%_PATH}
-	# now it should be a number, TODO accept more than numbers? Doesn't really matter...
-	# this check is mostly to be sure that the variable splitting worked as it should
-	# ugly cause we need to be ash compatible ...
-	if ! echo "${SHARE_ID}" | grep -q -E '^[0-9]+$'; then
-		continue
-	fi
-	
-	# now do try to mount the share using the helper function defined on the top of this script
-	eval mount_share \""\$SLX_SHARE_${SHARE_ID}_AUTH_TYPE"\" \""\$SLX_SHARE_${SHARE_ID}_AUTH_USER"\" \""\$SLX_SHARE_${SHARE_ID}_AUTH_PASS"\" \""\$SLX_SHARE_${SHARE_ID}_PERM"\" \""\$SLX_SHARE_${SHARE_ID}_PATH"\" \""$SHARE_ID"\"
-	## unset USER and PASSWD just in case mount_share returned due to an error.
-	unset USER
-	unset PASSWD
-done
diff --git a/core/modules/pam-common-share/module.build b/core/modules/pam-common-share/module.build
deleted file mode 100644
index 241bcd5e..00000000
--- a/core/modules/pam-common-share/module.build
+++ /dev/null
@@ -1,12 +0,0 @@
-#!/bin/bash
-fetch_source() {
-	:
-}
-
-build() {
-	pinfo "Static module, nothing to build."
-}
-
-post_copy() {
-	:
-}
diff --git a/core/modules/pam-common-share/module.conf b/core/modules/pam-common-share/module.conf
deleted file mode 100644
index f20668f6..00000000
--- a/core/modules/pam-common-share/module.conf
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/bash
-REQUIRED_MODULES="
-	slxlog
-"
-REQUIRED_BINARIES=""
-REQUIRED_LIBRARIES=""
-REQUIRED_DIRECTORIES=""