diff options
Diffstat (limited to 'core/modules/vmware12/data/opt/openslx/vmchooser/plugins/vmware/includes/write_final_vmx.inc')
| -rw-r--r-- | core/modules/vmware12/data/opt/openslx/vmchooser/plugins/vmware/includes/write_final_vmx.inc | 301 |
1 files changed, 0 insertions, 301 deletions
diff --git a/core/modules/vmware12/data/opt/openslx/vmchooser/plugins/vmware/includes/write_final_vmx.inc b/core/modules/vmware12/data/opt/openslx/vmchooser/plugins/vmware/includes/write_final_vmx.inc deleted file mode 100644 index b41a136f..00000000 --- a/core/modules/vmware12/data/opt/openslx/vmchooser/plugins/vmware/includes/write_final_vmx.inc +++ /dev/null @@ -1,301 +0,0 @@ -#!/bin/bash -################################################ -# Include: Create final VMX configuration file # -################################################ - - -# check for vmdk file marker %VM_DISK_PATH% and put vmdk path in it's place: also VM_DISK_MODE -# and VM_DISK_REDOLOGDIR. -replace_placeholders() { - if [ -n "$VM_DISKFILE_RW" ]; then - sed -i 's#%VM_DISK_PATH%#'"$VM_DISKFILE_RW"'#g' "${TMPCONFIG}" - sed -i 's#%VM_DISK_MODE%#'"independent-persistent"'#g' "${TMPCONFIG}" - else - sed -i 's#%VM_DISK_PATH%#'"$VM_DISKFILE_RO"'#g' "${TMPCONFIG}" - sed -i 's#%VM_DISK_MODE%#'"independent-nonpersistent"'#g' "${TMPCONFIG}" - fi - sed -i 's#%VM_DISK_REDOLOGDIR%#'"$VM_REDO_DIR"'#g' "${TMPCONFIG}" -} - -# Ethernet: All we do is entering a generated MAC, as we do not want to interfere -# in the possible case no networking is wanted. -setup_ethernet() { - echo 'ethernet0.addressType = "static"' >> "${TMPCONFIG}" - echo 'ethernet0.address = "'"${VM_MAC_ADDR}"'"' >> "${TMPCONFIG}" - if [ -n "$OTHER_NICS" ]; then - local devtype mac cnt eth - # Copy type of eth0, in case the others don't specify a type in the vmx, we'll use the same - # so we know the drivers are there - devtype=$(< "${TMPCONFIG}" grep -m1 -i '^ethernet0\.virtualDev' | sed -r 's/^[^=]+//;s/^(\s|=|")*//;s/(\s|")+$//') # TODO: Make a helper like "getVmxOption" - cnt=0 - for mac in $OTHER_NICS; do - vmnet=$(( cnt + 10 )) - cnt=$(( cnt + 1 )) - eth="ethernet${cnt}" - # Check device exists - if ! [ -c "/dev/vmnet${vmnet}" ]; then - slxlog "vmware-bridge-setup" "Cannot bridge NIC into VM: /dev/vmnet${vmnet} does not exist" - continue - fi - # Remove lines that could break things - sed -i "/^${eth}\.connectionType/Id;/^${eth}\.present/Id" "${TMPCONFIG}" - # Set up devType - devline= - if ! grep -q -i "^${eth}\.virtualDev" "${TMPCONFIG}" && [ -n "$devtype" ]; then - devline="${eth}.virtualDev = "'"'"${devtype}"'"' - fi - cat >> "${TMPCONFIG}" <<-HEND - ${eth}.connectionType = "custom" - ${eth}.present = "TRUE" - ${eth}.vnet = "vmnet${vmnet}" - ${eth}.addressType = "static" - ${eth}.address = "${mac}" - ${devline} - HEND - done - fi -} - -# DVD, CDROM -setup_optical_drives() { - # XXX: For now it's safe to assume ide channel 1 is free, as we support only one HDD. - # If it's IDE, it's on channel 0 - cat >> "${TMPCONFIG}" <<-HEREEND - ide1:0.present = "$CDROM0" - ide1:0.autodetect = "TRUE" - ide1:0.fileName = "auto detect" - ide1:0.deviceType = "cdrom-raw" - ide1:1.present = "$CDROM1" - ide1:1.autodetect = "TRUE" - ide1:1.fileName = "auto detect" - ide1:1.deviceType = "cdrom-raw" - HEREEND -} - -setup_floppies() { - local SLX_FLOPPY - if isset SLX_FLOPPY_IMG; then - SLX_FLOPPY="TRUE" - else - SLX_FLOPPY="FALSE" - fi - - # Floppies: - cat >> "${TMPCONFIG}" <<-HEREEND - floppy0.present = "TRUE" - floppy0.startConnected = "$FLOPPY0" - floppy0.autodetect = "TRUE" - floppy0.fileName = "auto detect" - floppy1.present = "$SLX_FLOPPY" - floppy1.startConnected = "TRUE" - floppy1.fileType = "file" - floppy1.fileName = "$SLX_FLOPPY_IMG" - HEREEND -} - -setup_serial() { - # Serial port - if [ -n "$SERIAL0" ]; then - cat >> "${TMPCONFIG}" <<-HEREEND - serial0.present = "TRUE" - serial0.startConnected = "TRUE" - serial0.fileType = "device" - serial0.fileName = "$SERIAL0" - serial0.tryNoRxLoss = "FALSE" - serial0.autodetect = "FALSE" - HEREEND - fi - - # Parallel port - if [ -n "$PARALLEL0" ]; then - cat >> "${TMPCONFIG}" <<-HEREEND - parallel0.present = "TRUE" - parallel0.startConnected = "TRUE" - parallel0.fileType = "device" - parallel0.fileName = "$PARALLEL0" - parallel0.bidirectional = "TRUE" - parallel0.autodetect = "FALSE" - HEREEND - fi -} - -# CPU and RAM -setup_vcpu_ram() { - #writelog "numvcpus = ${CPU_CORES} - maxvcpus=${HOST_CORE_COUNT}" - cat >> "${TMPCONFIG}" <<-HEREEND - numvcpus = "$CPU_CORES" - cpuid.coresPerSocket = "$VM_CORES_PER_SOCKET" - maxvcpus = "$HOST_CORE_COUNT" - memsize = "${VM_MEM}" - MemAllowAutoScaleDown = "FALSE" - MemTrimRate = "-1" - HEREEND -} - -setup_usb() { - # USB fallback: Only write usb config if there's none - if ! grep -q -i "^usb\.present" "${TMPCONFIG}"; then - # Nothing found, go ahead - if [ -n "$SLX_EXAM" ]; then # TODO better handling of exam mode... - # Exam mode: Default to no USB - sed -i '/^usb\./Id' "${TMPCONFIG}" - echo 'usb.present = "FALSE"' >> "${TMPCONFIG}" - else - echo 'usb.present = "TRUE"' >> "${TMPCONFIG}" - fi - fi - sed -i '/^usb\.generic\.autoconnect/Id' "${TMPCONFIG}" - echo 'usb.generic.autoconnect = "TRUE"' >> "${TMPCONFIG}" - - # USB 3.0 support changes quality and has different side effects - # with every minor release of vmware. Always force 2.0 for now. - # TODO: Get it fixed by vmware? - sed -i '/^ehci\.present/Id;/^usb_xhci\.present/Id' "${TMPCONFIG}" - echo 'ehci.present = "TRUE"' >> "${TMPCONFIG}" - - # See if there are any USB devices connected that we want to pass through immediately - get_usb_devices 'usb.autoConnect.deviceXXXXX = "0x%VENDOR%:0x%PRODUCT%"' \ - | sed -r 's/0x0+/0x/g' \ - | awk '{sub(/XXXXX/,NR-1)}1' \ - >> "${TMPCONFIG}" -} - -setup_shared_folders() { - if ! notempty SHARED_FOLDERS HOME_SHARE_PATH HOME_SHARE_NAME COMMON_SHARE_PATH COMMON_SHARE_NAME; then - writelog "Missing information to setup shared folders." - return 1 - fi - - cat >> "${TMPCONFIG}" <<-HEREEND - sharedFolder.option = "alwaysEnabled" - sharedFolder0.present = "$SHARED_FOLDERS" - sharedFolder0.enabled = "$SHARED_FOLDERS" - sharedFolder0.expiration = "never" - sharedFolder0.guestName = "$HOME_SHARE_NAME" - sharedFolder0.hostPath = "$HOME_SHARE_PATH" - sharedFolder0.readAccess = "TRUE" - sharedFolder0.writeAccess = "TRUE" - sharedFolder1.present = "$SHARED_FOLDERS" - sharedFolder1.enabled = "$SHARED_FOLDERS" - sharedFolder1.expiration = "never" - sharedFolder1.guestName = "$COMMON_SHARE_NAME" - sharedFolder1.hostPath = "$COMMON_SHARE_PATH" - sharedFolder1.readAccess = "TRUE" - sharedFolder1.writeAccess = "FALSE" - sharedFolder.maxNum = "2" - hgfs.mapRootShare = "TRUE" - hgfs.linkRootShare = "TRUE" - HEREEND -} - -setup_isolation() { - # Settings for isolation tools (drag & drop, copy & paste, etc...) - cat >> "${TMPCONFIG}" <<-HEREEND - isolation.tools.hgfs.disable = "$HGFS_DISABLED" - isolation.tools.dnd.disable = "FALSE" - isolation.tools.copy.enable = "TRUE" - isolation.tools.paste.enabled = "TRUE" - HEREEND -} - -# Serial, parallel: Empty, nothing is being currently set. TODO later. - -setup_graphics() { - # Graphics, GPU: 3D will be enabled (even if vmware doesn't support the chip) if we whitelisted it. - if isset SLX_VMWARE_3D; then - writelog "FORCE3D set - overriding 3D in vmx file." - echo 'mks.gl.allowBlacklistedDrivers = "TRUE"' >> "${TMPCONFIG}" - # We override... play safe and cap the hwVersion to 10, since some i915 chips goofed up with 12 - # Investigate if we might have to do this in other cases where we don't override - if grep -qi '^mks.enable3d.*true' "${TMPCONFIG}"; then - vmw_cap_hw_version "10" - fi - else - writelog "FORCE3D not set - 3D will only work if GPU/driver is whitelisted by vmware." - fi - - # Disable DPI scaling information passing via vmware tools - sed -i '/^gui.applyHostDisplayScaling/Id' "${TMPCONFIG}" - echo 'gui.applyHostDisplayScalingToGuest = "FALSE"' >> "${TMPCONFIG}" - - # Additinal exam mode settings - if [ -n "$SLX_EXAM" ]; then - echo 'gui.restricted = "true"' >> "${TMPCONFIG}" - fi - - # Hack resolution if we know the desired one is not in the default list of vmx_svga - # For now, only do it on the odd ones, as we don't know if this has any side effects - # This seems unnecessary on Win7 but is required on WinXP - need more research for other OSs - case "$RESOLUTION" in - 1600x900|2560x1080|2560x1440|2880x1800|3200x1800|3440x1440) - X=${RESOLUTION%x*} - Y=${RESOLUTION#*x} - BYTES=$(( ( ( X * Y * 4 + 65535 ) / 65536 ) * 65536 )) - [ "$BYTES" -lt 16777216 ] && BYTES=16777216 - cat >> "${TMPCONFIG}" <<-EOF - svga.autodetect = "FALSE" - svga.vramSize = $BYTES - svga.maxWidth = $X - svga.maxHeight = $Y - EOF - ;; - esac - - # Killing duplicate lines (output much nicer than sort -u): - awk '!a[$0]++' "${TMPCONFIG}" > "${TMPCONFIG}.tmp" && mv -f "${TMPCONFIG}.tmp" "${TMPCONFIG}" -} - -finalize_hardware() { - # Apply $maxhardwareversion to final VMX - if notempty VM_HW_VERSION && [ "$VM_HW_VERSION" -gt "$maxhardwareversion" ]; then - writelog "Hardware version capped to $maxhardwareversion (was $VM_HW_VERSION)" - sed -i 's/^virtualHW\.version.*$/virtualHW.version = "'$maxhardwareversion'"/I' "${TMPCONFIG}" - VM_HW_VERSION="$maxhardwareversion" - fi - - # Enable nested virtualization if not specified in remote vmx - if [ -e "/run/hwinfo" ] && ! grep -qi '^vhv\.enable' "${TMPCONFIG}" \ - && detect_cpu_flag "ept" "npt" \ - && [ "$VM_HW_VERSION" -ge "9" ]; then - . "/run/hwinfo" - [ "${HW_KVM}" = "ENABLED" ] && echo 'vhv.enable = "TRUE"' >> "${TMPCONFIG}" - fi - - # Disable space check warnings - sed -i '/^mainMem.freeSpaceCheck/Id' "${TMPCONFIG}" - echo 'mainMem.freeSpaceCheck = "FALSE"' >> "${TMPCONFIG}" - - # Fix keymap fuckup when leaving VM - sed -i '/^mks.x.resetModMap/Id' "${TMPCONFIG}" - echo 'mks.x.resetModMap = "FALSE"' >> "${TMPCONFIG}" - - # TODO: Need a way to check if supported by hardware before enabling! - #grep -qi '^vpmc\.enable' "${TMPCONFIG}" || echo 'vpmc.enable = "TRUE"' >> "${TMPCONFIG}" -} - - -## MAIN ## -write_final_vmx() { - replace_placeholders - setup_ethernet - setup_optical_drives - setup_floppies - setup_serial - setup_vcpu_ram - setup_usb - [ "x$HGFS_DISABLED" = "xFALSE" ] && setup_shared_folders - setup_isolation - setup_graphics - finalize_hardware - - # At last: Let's copy it to $VM_CONF_DIR/run-vmware.conf - if cp -p "${TMPCONFIG}" "${VM_RUN_FILE}"; then - writelog "Copied '${TMPCONFIG}' to '${VM_RUN_FILE}'" - else - writelog "Could not copy TMPDIR/IMGUUID -${TMPCONFIG}- to VM_RUN_FILE ${VM_RUN_FILE}!" - # cleanexit 1 # that seems not needed! - fi -} -call_post_source write_final_vmx - - |