#!/bin/sh
# Copyright (c) 2003 - 2006 - RZ Uni Freiburg
# Copyright (c) 2006, 2007 - OpenSLX GmbH
#
# This program is free software distributed under the GPL version 2.
# See http://openslx.org/COPYING
#
# If you have any feedback please consult http://openslx.org/feedback and
# send your feedback to feedback@openslx.org
#
# General information about OpenSLX can be found at http://openslx.org
#
# main script for new type of initial ramdisk for OpenSLX linux diskless
# clients version 4
#############################################################################
# functions common for all distros, messages contains all error and info
# output (for some reason the error output is not produced properly - crash)
# how do the localization here? There is not yet a country-Variable
. /etc/messages
. /etc/functions || ( echo -e $init_mff && sleep 100 )
. /etc/distro-functions || ( echo -e $init_dff && sleep 100 )
# distro specific configuration settings (several file and directory
# variables)
. /etc/sysconfig/config || ( echo -e $init_dscf && sleep 100 )
# configuration settings for slx environment
. /etc/sysconfig/slxconfig 2>/dev/null || ( echo -e ${init_sscf} && \
sleep 100 )
# machine-setup configuration (common settings for all clients using a
# certain InitRamFS generated by slxmkramfs/mkdxsinitrd)
[ -f /etc/machine-setup ] && . /etc/machine-setup 2>/dev/null
export PATH=/bin:/sbin:/usr/bin/:/usr/sbin
export date="${slxconf_date}"
export DEBUGLEVEL=0
export KERNEL="${slxconf_kernver}"
export NWMODULES="${slxconf_listnwmod}"
export DISTRO="${slxconf_distro}"
# do not use dnbd cache file
nodnbdcache="yes"
# device files get their own filesystem (to be move mounted later)
devdir="/dev"
mount -n -t tmpfs -o 'size=25%,mode=0755' initramfsdevs ${devdir}
# copy basic device files into dev (later udev will handle that)
cp -a /tmp/null /tmp/console /dev
mkdir -p ${devdir}/pts
mkdir -p ${devdir}/shm
mkdir -p ${devdir}/.udevdb
# mount the important standard directories
[ ! -f /proc/cpuinfo ] && mount -n -t proc proc /proc
[ ! -d /sys/class ] && mount -n -t sysfs sysfs /sys
# fixme: shut down if script fails
trap "exec (sleep 30; echo o>/proc/sysrq-trigger)" \
SIGHUP SIGINT SIGPIPE SIGTERM SIGIO
# if no kernel version is set, try to get it directly from /proc
if [ -z $KERNEL ] ; then
KERNEL=$(cat /proc/version)
KERNEL=${KERNEL#*version }
KERNEL=${KERNEL% (*) (*}
fi
# set defaults for some important variables, might be overwritten via
# kernel commandline
tmpfssize="50%"
cowsize="50%"
rwdir=/dev/shm
nfsro="nfs"
# load usb modules for keyboard (reenable usb keyboards, otherwise the
# admin has to wait until second run of hwsetup late in stage3)
hwautocfg pre
# run pre init script and user defined preinit.local, copied by mkdxsinitrd
# from /var/lib/openslx/config/... in stage2
preinit
[ -x /bin/preinit.local ] && /bin/preinit.local
# start device auto discovery service - busybox or distro specific function
runudev
# switch off the several configuration methods, will be switched on
# according to kernel commandline settings
echo "noldap" > /tmp/ldap-done
echo "nodhcp" > /tmp/dhcp-done
echo "nofile" > /tmp/file-done
# read kernel commandline
read KCMDLINE < /proc/cmdline
export KCMDLINE
for opts in ${KCMDLINE} ; do
case ${opts} in
# localization
country=*)
COUNTRY=${opts#country=}
echo -e "\n# localization information gotten via kernel command line \
in $0\ncountry=\"${COUNTRY}\"" >> /etc/machine-setup
;;
# single token for debugging ...
debug)
DEBUGLEVEL=1;;
# ... or a specified debug level
debug=*)
DEBUGLEVEL=${opts#debug=}
[ $DEBUGLEVEL -eq 8 -o $DEBUGLEVEL -eq 20 ] && \
echo "** SLX init started near $(sysup)"
;;
# if configuration should be gathered by dhcp client
dhcp)
dhcp="yes"
rm /tmp/dhcp-done
;;
# if ldap configuration should be triggered
ldap)
ldap="yes"
rm /tmp/ldap-done
;;
# ldap configuration with host and port to contact (base)
ldap=*)
ldap="yes"
rm /tmp/ldap-done
;;
# if (external, via tftp) configuration file retrieval should be
# triggered, if no source is given try dhcp server and predefined
# standard path (.../tftpboot/client-config/ ...)
file)
file="yes"
rm /tmp/file-done
;;
# file source with tftp server and file location on the server
file=*)
file="yes"
filesrc=${opts#file=}
rm /tmp/file-done
;;
# if ld.so.cache should not be generated
noldsc)
noldsc=yes;;
# additional source to unify root filesystem with
union=*)
unionfs=1
uniondirs=${opts#union=}
;;
# if unionfs should be used over the complete root filesystem
unionfs)
unionfs=1;;
# if cowloop should be used, only ontop of network block device and in
# combination with classical fs, like ext2 useful
cowloop=*)
cowloop=1
#cowsize=${opts#cowloop=}
;;
# rootfs will void the variables (d)nbdroot, nfsroot ...
# fixme: allow multiple rootfs sources to be unioned!?
# if strinstr " " "$rootfs" ...
rootfs=*)
rootfs=${opts#rootfs=}
srvproto=$(uri_token $rootfs prot)
case $srvproto in
nfs)
# nfsroot consists now of two different parts
root_path=/$(uri_token $rootfs path)
nfsserver=$(uri_token $rootfs server)
echo -e "\n# nfs root information gotten via kernel command \
line in $0\n#nfsroot=\"${nfsserver}:${root_path}\"\n" >> /etc/machine-setup
;;
*nbd)
nbdmod=$srvproto
# get settings for nbd-client, filesystem equals to path in URI
# notation
nbdhost=$(uri_token $rootfs server)
nbdport=$(uri_token $rootfs port)
nbdrfst=$(uri_token $rootfs path)
;;
aoe)
echo "Not implemented yet"
;;
iscsi)
echo "Not implemented yet"
#iscsiserver=$(uri_token $rootfs server)
#iscsiport=$(uri_token $rootfs port)
#iscsitarget=$(uri_token $rootfs path)
;;
esac
;;
# size of cache dnbd should use within ram
dcsize=*)
dnbdcachesize=${opts#dcsize=};;
# ip configuration client-ip:server-ip:gateway:netmask
ip=*)
ipinfo=${opts#ip=};;
# deprecated: nfs server and path (will be removed soon)
nfsroot=*)
nfsroot=${opts#nfsroot=}
#root_path=
#nfsserver=
echo -e "\n# nfs root information gotten via kernel command line in \n\
$0\n# deprecated: please use rootfs=nfs://...\nnfsroot=\"${nfsroot}\"\n" \
>> /etc/machine-setup
;;
# size of tempfs if not max. 50% of RAM should be used
tmpfssize=*)
tmpfssize=${opts#tmpfssize=};;
# vendor code identifier for dhcp requests, that way odlx clients could
# be distinguished from other (dhcp) clients
vci=*)
vci=${opts#vci=};;
xenbr)
xenbr=1;;
esac
done
# at this point a timer should be started to ensure an automated reboot
# or halt of the machine if SLX init does not succeed (e.g. missing kernel
# module for the network adaptor)
if [ ${DEBUGLEVEL} -lt 3 -o ${DEBUGLEVEL} = 8 ] ; then
[ -x /bin/busybox ] && shtype=a
cat<<EOF > /bin/watchdog
#!/bin/${shtype}sh
echo \$$ > /tmp/watchdogpid
[ ! -f /proc/version ] && mount -n -t proc proc /proc
. /etc/functions
sleep 120 2> /dev/null
echo "o" > /proc/sysrq-trigger
EOF
chmod u+x /bin/watchdog
watchdog &
fi
# check if at least one type of IP configuration is availabe
if [ -z "$dhcp" -a -z "$ldap" -a -z "$ipinfo" ] ; then
echo -e "# You did not specify any advanced configuration mode for your \
clients. You\n# might want to add the token 'dhcp' for DHCP configuration, \
'file(=source)'\n# for config file get via TFTP or 'ldap(=source)' for LDAP \
configuration to\n# your kernel command line." >> /etc/machine-setup
if strinfile "clientip" /etc/machine-setup ; then
# IP configuration seems to be present in machine-setup file
. /etc/machine-setup
ipinfo="ip=$clientip:$serverip:$gateway:$subnet_mask"
else
error "$init_errip"
fi
fi
# for ldap configuration at least basic IP setup is needed to contact the
# server
[ -z "$dhcp" -a -n "$ldap" -a -z "$ipinfo" ] && error "$init_errldap"
# set debug level and logfile
if [ $DEBUGLEVEL -eq 20 ] ; then
echo "** Setting debuglevel to ${DEBUGLEVEL} at $(sysup)"
else
echo "Setting debuglevel to ${DEBUGLEVEL}"
fi
export MODPRV=" "
export LOGFILE
if [ "${DEBUGLEVEL}" -gt 0 -a "${DEBUGLEVEL}" != 8 ] ; then
# if LOGFILE should be used within initial ramdisk add '/mnt' in front
# of the variable
LOGFILE="/var/log/dxs-boot.log"
echo "1 4 1 7" >/proc/sys/kernel/printk
[ "${DEBUGLEVEL}" -ge 2 ] && MODPRV="-v"
[ "${DEBUGLEVEL}" -gt 3 -a "${DEBUGLEVEL}" -le 10 ] && {
set -x
# and the kernel too
echo "7 7 7 7" >/proc/sys/kernel/printk; }
[ "${DEBUGLEVEL}" -gt 10 -a "${DEBUGLEVEL}" -le 20 ] && set +x
else
# switch off most of kernel debug output
echo "0 0 0 0" >/proc/sys/kernel/printk
# modprobe should stay quiet
MODPRV="-q"
LOGFILE="/dev/null"
# redirect console (after /dev/null is available, and /dev mounted)
[ "${DEBUGLEVEL}" != 8 ] && exec < /dev/console > /dev/null 2>&1
fi
# load network adaptor modules
hwautocfg nwmod
# set up loopback networking (ipsetup - function defined in /etc/functions)
[ $DEBUGLEVEL -eq 20 ] && echo "** starting ip config at $(sysup)"
ipsetup 127.0.0.1 255.0.0.0 0.0.0.0 127.255.255.255 lo
# Xen bridge config
[ -n "$xenbr" ] && xenbr_config
# analyze ip information from the kernel command line and put parts
# of it into several variables
if [ -n "$ipinfo" ] ; then
getip () {
local val="$ipinfo:"; i=$(expr $1 - 1);
while [ $i -gt 0 ] ; do
val=${val#*:} ; i=$(expr $i - 1);
done;
echo $val|sed "s/:.*//"; }
clientip=$(getip 1)
serverip=$(getip 2)
gateway=$(getip 3)
subnet_mask=$(getip 4)
echo -e "# ip configuration written by $0 script\nclientip=$clientip\n\
subnet_mask=$subnet_mask\ngateway=$gateway\nserverip=$serverip" \
>>/etc/machine-setup
# set static ip address via function ipsetup
ipsetup $clientip $subnet_mask $gateway 255.255.255.255 eth0
else
noipyet="yes"
fi
# get configuration data via dhcp (with vendor code identifier if present
# in ${vci} from kernel command line or machine-setup) ...
[ -n "$dhcp" ] && rundhcp ${vci} &
if [ -n "$noipyet" ] ; then
waitfor /tmp/dhcp-done 20000
. /etc/machine-setup
[ -f /tmp/confviadhcp ] && . /tmp/confviadhcp
[ -z "$clientip" -o -z "$subnet_mask" -o -z "$gateway" \
-o -z "$broadcast_address" ] && error "$init_errdhcp"
ipsetup $clientip $subnet_mask $gateway $broadcast_address eth0
fi
# check if serverip is set as variable @@@serverip@@@
sed "s,@@@serverip@@@,$serverip," -i /etc/machine-setup
[ $DEBUGLEVEL -eq 20 ] && echo "** finished ip config at $(sysup)"
# ... or ldap if available (in background)
[ -n "$ldap" ] && ldapconf &
# ... or via tftp file get (in background)
[ -n "$file" ] && fileget &
# if root filesystem should be imported via (d) network block device
if [ -n "${nbdmod}" ] ; then
# load block device driver if needed
modprobe ${MODPRV} ${nbdmod} || error "$init_errnbd"
[ -x /bin/mdev ] && mdev -s
[ -z "$nbdrfst" ] && nbdrfst=ext2
nbdhost=$(checkip $nbdhost)
if [ $DEBUGLEVEL -eq 20 ] ; then
echo "** starting setup of ${nbdmod} at $(sysup)"
else
echo "Diskless client using ${nbdmod} on $nbdhost:$nbdport with $nbdrfst"
fi
# fixme: check for fs in /proc/filesystems before trying to load the module
modprobe ${MODPRV} ${nbdrfst} || error "$init_errnbd" nonfatal
case "${nbdmod}" in
# network block device present in standard kernel
nbd)
RDEV=/dev/nbd0
waitfor "${RDEV}" 20000 || error "$init_nbddev"
while ! nbd-client $nbdhost $nbdport ${RDEV} ; do
usleep 100
done
usleep 100
# switch off unneeded block read ahead
echo "0" > /sys/block/nbd0/queue/read_ahead_kb
;;
# dnbd by Thorsten Zitterell
dnbd)
# quickhack
if [ -z $nodnbdcache ] ; then # variable not really used yet
mkdir /dnbd
mount -n -o 'size=10%' -t tmpfs tmpfs /dnbd
( cat /dev/zero > /dnbd/cache 2>/dev/null || echo "ok" >/tmp/cache ) &
clientopt="-c /dnbd/cache"
waitfor /tmp/cache 10000
fi
waitfor /dev/dnbd0 10000 || error "$init_nbddev"
while ! dnbd-client -b $nbdhost -d /dev/dnbd0 $clientopt ; do
usleep 100
done
echo "0" > /sys/block/dnbd0/queue/read_ahead_kb
RDEV=/dev/dnbd0
;;
esac
RWRO="ro"
if [ -n "${cowloop}" -a -x /bin/cowdev ] ; then
modprobe ${MODPRV} cowloop || {
error "$init_loadcow" nonfatal
cowloop=""; }
[ -x /bin/mdev ] && mdev -s
fi
if [ -n "${cowloop}" ] ; then
if [ -n "${unionfs}" ] ; then
error "$init_cownonbd"
unionfs="";
fi
echo "Using Copy-on-Write block device for rw access"
mount -n -t tmpfs -o size=${cowsize} ramfs ${rwdir}
mkdir /dev/cow && cp -a /tmp/ctl /dev/cow
usleep 200
ln -s /dev/cowloop0 /dev/cow/0
cowdev -a /dev/nbd0 ${rwdir}/nbd.cow
usleep 200
RWRO="rw"
RDEV=/dev/cow/0
# run ldconfig if not switched off via kernel command line
ldcfg
else
# use normal UnionFS behaviour because rootfs is not NFS
nfsro=""
fi
# finally mount the block device
for i in 1 50 100 200 400 1000 ; do
usleep $i
mount -n -t $nbdrfst -o $RWRO $RDEV /mnt 2>/dev/null && break
done
[ $DEBUGLEVEL -eq 20 ] && echo "** finished nw blockdev stuff at $(sysup)"
elif [ -n ${iscsiserver} ] ; then
[ $DEBUGLEVEL -eq 20 ] && echo "** started setting up iSCSI initiator at \
$(sysup)"
#if [ -n ${iscsitarget} ] ; then
# echo "InitiatorName=${iscsitarget}"|sed "s,@@@serverip@@@,$serverip," \
# >/etc/initiatorname.iscsi
#else
# discovery
#fi
#echo -e "node.startup = automatic">/etc/iscsid.conf
#iscsid -c /etc/iscsid.conf
# the cowloop part has to be moved (option for iscsi devices too)
# and should be generalized for nbd, dnbd, iscsi
fi
# if no type of root filesystem is passed via kernel command line try
# information gathered from dhcp process (only valid for nfs)
if [ -z "${nbdmod}" -a -z "${nbdhost}" -a -z "${nfsroot}" ] ; then
# information has to be read from dhcp and ldap configuration
cfgcomplete
fi
# call function for nfs mounts
if [ -z "${nbdmod}" -a -z "${nbdserver}" ] ; then
[ $DEBUGLEVEL -eq 20 ] && echo "** started nfs mount"
. /etc/machine-setup
# check if nfsserver is set as variable @@@serverip@@@
nfsserver=$(checkip $nfsserver)
nfsroot=${nfsserver}:${root_path}
nfsmnt ${nfsroot} || error "$init_nfs"
[ $DEBUGLEVEL -eq 20 ] && echo "** finished nfs mount at $(sysup)"
fi
# get the complete collection of kernel modules available
mount -n --bind /mnt/lib/modules/${KERNEL} /lib/modules/${KERNEL} || \
error "$init_moddir"
# start hardware configuration as background process if not a special
# debuglevel (21) is used for the option of manual hwautocfg start
if [ ${DEBUGLEVEL} = 21 ] ; then
echo "You can run 'hwautocfg main &' manually now ..."
/bin/sh
else
[ $DEBUGLEVEL -eq 20 ] && echo "** started hwautocfg in background at \
$(sysup)"
hwautocfg main &
fi
# try to use unionfs for rw access if available
if [ -n "${unionfs}" -o -n "${union}" ] ; then
modprobe ${MODPRV} unionfs || {
error "$init_loadufs" nonfatal
unionfs=""; }
fi
# setup of client root filesystem dependent on the availability of UnionFS
if [ -n "${unionfs}" ] ; then
echo "Using UnionFS for rw access"
mkdir -p ${rwdir}/union ${rwdir}/uniontmp /rorootfs
mount -n -t tmpfs none ${rwdir}/uniontmp
# hack for handling unionfs with patched run-init
mount -n --move /mnt /rorootfs
mount -n -t unionfs -o dirs=${rwdir}/uniontmp:/rorootfs=${nfsro}ro \
none /mnt
mkdir -p /mnt/uniontmp
mount -n --move ${rwdir}/uniontmp /mnt/uniontmp
chmod 0755 /mnt/uniontmp /mnt
# if additional sources should be used for a combined root filesystem
# probably more sources should be merged into union (${union} is defined)
# allow more than one union??
if [ -n "${union}" ] ; then
# for dir in "${union}"; do
# testmkd /unionadd/$dir
# mount $dir unionadd/$dir
# unionctl mnt --add --after /mnt --mode ro /unionadd/$dir
# most probably it is a good idea to run ldconfig, so enable it
unset noldsc
fi
# run ldconfig if not switched off via kernel command line
ldcfg
# runlevel directories should contain no links
for i in ${D_RCDIRS} ${D_INITBOOTD} ; do
rm -f /mnt/etc/$i/* 2>/dev/null
done
elif [ -z "${cowloop}" ] ; then
echo "Using bind mounts to ramdisk for rw access"
mount -n -t tmpfs -o size=${tmpfssize} ramfs ${rwdir}
for path in ${D_BINDMPTS} ; do
mkdir -p ${rwdir}/${path} >/dev/null 2>&1
mount -n --bind ${rwdir}/${path} /mnt/${path}
[ ${DEBUGLEVEL} -gt 1 -a ${DEBUGLEVEL} != 8 ] && \
echo "Created ${rwdir}/${path} and mounted it to /mnt/$path"
done
# see above ...
ldcfg
# save the RO directories mentioned in the distro-specific
# config to a temporary directory. They will lateron be restored
for path in ${D_RODIRSINRW}; do
if [ -d /mnt/${path} ] ; then
list=${path}" "${list}
# exclude them from etc copy process too
echo ${path}|sed -e "s,/root/,," >>/tmp/etc.exclude
mkdir -p /root/${path} >/dev/null 2>&1
mount -n --bind /mnt/${path} /root/${path} >/dev/null 2>&1
fi
done
for path in /etc/${D_SYSCONFDIR} ${D_DIRINBINDMNT} ${list}; do
mkdir -p ${rwdir}/${path}
done
testmkd ${rwdir}/var/tmp
chmod a+rwxt ${rwdir}/var/tmp >/dev/null 2>&1
# exclude all sysv runlevel link stuff
for i in ${D_RCDIRS} ${D_INITBOOTD} ; do
echo "*$i/*" >>/tmp/etc.exclude
done
# add list of files to be excluded and common excludes to the filter list
echo -e "${D_ETCEXCL}\n@@@COMETCEXCL@@@" >>/tmp/etc.exclude
# if ld.so.cache is to be generated then do not copy the file
[ -z "${noldsc}" ] && echo -e "ld.so.cache*" >>/tmp/etc.exclude
# for tar exclude lists might be used, more difficult for cp
cd /mnt
tar -X /tmp/etc.exclude -cp etc/* | \
tar -xp -C ${rwdir} 2>/dev/null ;
cd /
mount -n --bind ${rwdir}/etc /mnt/etc
mount -n --bind ${rwdir}/var /mnt/var
# get the "covered" mounts back into filesystem structure
for i in ${list}; do
mount -n --move /root/$i /mnt/$i #>>$LOGFILE 2>&1
done
#rm -rf /root/* >/dev/null 2>&1
# run some specific stuff !?
fi
# script for stuff to execute during early bootup
d_mkrlscript init boot.ld "Running configuration postponed from InitRamFS"
echo "fs complete at $(sysup)" >/tmp/fscmpl
# write debug file information after filesystem setup completed
echo -e "# /etc${D_SYSCONFDIR}/logfile - file created by $0 (initramfs \
from $date)\n#\n# logfile \
for linux diskless client specific debugging output\nLOGFILE=\"$LOGFILE\"\n#\
\n# debug level\nDEBUGLEVEL=\"$DEBUGLEVEL\"" \
> /mnt/etc/${D_SYSCONFDIR}/logfile || error "$init_errlog"
# run distribution independent and dependent configuration of files and
# services (offer debug shell in runlevel 22)
if [ ${DEBUGLEVEL} = 22 ] ; then
/bin/sh
else
servconfig &
fi
for path in @@@COMDIRINDXS@@@ ${D_DIRINDXS} ${D_DIRINBINDMNT} ; do
testmkd /mnt/${path}
done
# Needed writable subdirs nested in readonly subdirs of writable one
for path in ${D_RWDIRSINRO}; do
mount -n -t tmpfs none /mnt/${path}
done
for i in /var/run/utmp /var/log/wtmp /var/log/lastlog /etc/mtab ; do
echo -n > /mnt/$i
done
chown 65534:0 /mnt/var/lib/nobody
# /proc/bus/usb might be deprecated in newer kernels ...
echo -e "# /etc/fstab - file generated by $0 (initramfs from $date)\n#\
\tDirk von \
Suchodoletz, dirk@goe.net\n\nrootfs\t\t/\t\trootfs\t\tro\t\t 0 0\n\
proc\t\t/proc\t\tproc\t\tdefaults\t 0 0\ninitramdevs\t/dev\t\ttmpfs\
\t\trw\t\t 0 0\ndevpts\t\t/dev/pts\tdevpts\t\tmode=0620,gid=5\t 0 0\n\
usbfs\t\t/proc/bus/usb\tusbfs\t\tnoauto\t\t 0 0" >/mnt/etc/fstab || \
error "$init_fstab"
echo -e "rootfs / rootfs rw 0 0\ninitramdevs /dev tmpfs rw\
0 0" > /mnt/etc/mtab
# copy library cache if generated
if [ -z "${noldsc}" ] ; then
if waitfor /tmp/ldcfg 50000 ; then
test -s /mnt/tmp/ld.so.cache && {
cp /mnt/tmp/ld.so.cache /mnt/etc/ld.so.cache
rm /mnt/tmp/ld.so.cache; }
else
error "$init_errldcfg"
fi
else
error "$init_infldcfg" nonfatal
fi
# wait a while for hardware setup to complete and copy stuff to stage4
waitfor /tmp/hwcfg 30000 || error "$init_errhw"
[ -f /tmp/scanner-udev ] && cat /tmp/scanner-udev \
>> /mnt/etc/udev/rules.d/04-scanner.rules
# wait for completion of Xorg configuration and finalize it
waitfor /tmp/xready 20000 || error "$init_errxorg" nonfatal
cp /etc/xorg.conf /mnt/${D_XF86CONFFILE}
# wait a while for services setup to complete
waitfor /tmp/svcfg 20000 || error "$init_errsw"
# IP configuration is complete and should not be updated automatically
killall -9 dhcpcd dhclient pump udhcpc 2>/dev/null
# copy machine configuration file into stage4 filesystem
cp /etc/machine-setup /mnt/etc
# If locations are given that should be unioned with the fs root, do it
if [ -n "$uniondirs" ]; then
include_in_fsroot_union $uniondirs
fi
# post init for some distro specific (fixme!! more elegant solution)
postinit
[ -s /initramfs/postinit.local ] && \
cp /initramfs/postinit.local /bin/postinit.local
[ -x /bin/postinit.local ] && {
[ $DEBUGLEVEL -gt 0 ] && \
echo "Running postinit.local - if boot stops here, check the script!"
/bin/postinit.local; }
# start a debug shell in higher debug levels
[ $DEBUGLEVEL -gt 2 -a $DEBUGLEVEL != 8 ] && /bin/sh
# unmount the bind mounted modules directory
export ticks
for ticks in 0 200 300 500 800 1000 1200 2000 5000 ; do
usleep $ticks && umount -n /lib/modules/${KERNEL} 2>/dev/null && break
error "$init_wait" nonfatal
done
[ $ticks -gt 1000 ] && error "$init_errumnt"
# check for inittab file (might fail for new style init -> upstart)
test -f /mnt/etc/inittab || test -d /mnt/etc/event.d || error "$init_erritab"
# close runlevel script for stuff to execute during early bootup
d_mkrlscript close boot.ld ""
# put /tmp into stage4 mtab and add stuff to stage4 fstab
sed -n "s,/mnt,,;/\/tmp /p" /proc/mounts >> /mnt/etc/mtab
[ -f /tmp/fstab ] && cat /tmp/fstab >> /mnt/etc/fstab
# preparations to leave initramfs - umounting ...
umount -n /sys || error "$init_errsys" nonfatal
umount -n /proc/bus/usb >/dev/null 2>&1
chmod 1777 /mnt/dev/shm /mnt/tmp /mnt/tmp/scratch 2>/dev/null
mount -n --move /dev /mnt/dev
# stop udevd (non-busybox udevs) and kill hwautocfg, servconfig
killall -9 udevd hwautocfg servconfig 2>/mnt/dev/null
# runtimer
[ $DEBUGLEVEL -eq 8 -o $DEBUGLEVEL -eq 20 ] && \
echo "** SLX init ended near $(sysup)"
# kill the watchdog (autopoweroff, if stage3 init never finishes)
[ -f /tmp/watchdogpid ] && kill $(cat /tmp/watchdogpid) 2>/mnt/dev/null
umount -n /proc
# unset old environment variables
unset debug date initrd ip dnbdroot nbdroot nfsroot rootfs ticks vci vga
unset BOOT_IMAGE KCMDLINE KERNEL MODPRV NWMODULES OLDPWD UDEVD_EVENT_TIMEOUT \
UDEVD_EXPECTED_SEQNUM PATH
# new style of pivoting (switch_root or run-init in klibc)
exec /bin/switch_root -c dev/console /mnt /sbin/init || error "$init_runinit"
