blob: 07d684f099508b53079f7d923668ee36ec2f0037 (
plain) (
tree)
|
|
# Linux NAT configuration file
[host]
# NAT gateway address
ip = 192.168.100.2
netmask = 255.255.255.0
# or ip = 172.16.184.2/24
# enable configuration; disabled by default for security reasons
#configport = 33445
# VMnet device if not specified on command line
device = /dev/vmnet8
# Allow PORT/EPRT FTP commands (they need incoming TCP stream...)
activeFTP = 1
# Allows the source to have any OUI. Turn this one if you change the OUI
# in the MAC address of your virtual machines.
#allowAnyOUI = 1
[udp]
# Timeout in seconds, 0 = no timeout, default = 60; real value might
# be up to 100% longer
timeout = 60
[incomingtcp]
# Use these with care - anyone can enter into your VM through these...
# FTP (both active and passive FTP is always enabled)
# ftp localhost 8887
#8887 = 172.16.184.128:21
# WEB (make sure that if you are using named webhosting, names point to
# your host, not to guest... And if you are forwarding port other
# than 80 make sure that your server copes with mismatched port
# number in Host: header)
# lynx http://localhost:8888
#8888 = 172.16.184.128:80
# SSH
# ssh -p 8889 root@localhost
#8889 = 172.16.184.128:22
[incomingudp]
# UDP port forwarding example
#6000 = 172.16.184.128:6001
|
