change dir structure

1 files changed, 0 insertions, 299 deletions

diff --git a/initramfs/stage3-stuff/bin/hwautocfg b/initramfs/stage3-stuff/bin/hwautocfg
deleted file mode 100755
index 1f02892e..00000000
--- a/initramfs/stage3-stuff/bin/hwautocfg
+++ /dev/null
@@ -1,299 +0,0 @@
-#!/bin/sh
-# Copyright (c) 2003..2006 - RZ Uni Freiburg
-# Copyright (c) 2006..2010 - OpenSLX GmbH
-#
-# This program is free software distributed under the GPL version 2.
-# See http://openslx.org/COPYING
-#
-# If you have any feedback please consult http://openslx.org/feedback and
-# send your feedback to feedback@openslx.org
-#
-# General information about OpenSLX can be found under http://openslx.org
-#
-# Universal (distro independent) hardware autoconfiguration script for 
-# OpenSLX linux stateless clients, using SuSE hwinfo for configuration
-
-#############################################################################
-# pre part, load USB modules and start hardware detection pci
-base () {
-# avoid annoying error messages because of missing scripts
-for tool in /usr/sbin/acpidump \
-            /usr/bin/udevinfo \
-            /sbin/dmraid ; do
-              testmkd ${tool%/*}
-              echo -e "#!/bin/sh" >${tool}
-              chmod u+x ${tool}
-done
-# no kernel messages, switch on hotplug via /sbin/mdev
-echo "0 0 0 0" >/proc/sys/kernel/printk
-echo "/sbin/mdev" >/proc/sys/kernel/hotplug
-modprobe -a ${MODPRV} usbhid hid-bright 2>/dev/null &
-# check from vga= that the traditional framebuffer is needed e.g. for splashy
-# get information on the graphics adaptor if bootsplash or xserver plugins are
-# present and the new drm/kms infrastructure is present
-if strinfile "vga=" /proc/cmdline; then
-  ( modprobe -a vesafb fbcon 2>/dev/null
-    hwinfo --gfxcard >/etc/hwinfo.gfxcard ) &
-elif [ -e /etc/init-hooks/00-started/xserver.sh -o \
-       -e /etc/init-hooks/05--have-kernelvars/bootsplash.sh ] && \
-     [ -e /lib/modules/${KERNEL}/kernel/drivers/gpu ]; then
- # check for the standard modules (single gpu, multiple connector only)
-  ( hwinfo --gfxcard >/etc/hwinfo.gfxcard
-    case $(cat /etc/hwinfo.gfxcard) in
-       *i915*)
-         modprobe -a ${MODPRV} i915 2>/dev/null
-         ;;
-       *intel*|*Intel*)
-         modprobe -a ${MODPRV} i810 i830 i915 2>/dev/null
-         ;;
-       *nvidia*|*NVidia*|*nouveau*)
-         modprobe ${MODPRV} nouveau 2>/dev/null
-         ;;
-       *radeon*|*Radeon*)
-         modprobe ${MODPRV} radeon 2>/dev/null
-         ;;
-       *mga*|*matrox*|*Matrox*)
-         modprobe ${MODPRV} mga 2>/dev/null
-         ;;
-       *)
-         modprobe -a ${MODPRV} r128 savage sis tdfx ttm via
-         ;;
-    esac
-    modprobe -a drm fbcon; mdev -s ) & 
-fi
- 
-# check and then load appropriate network card modules
-nwcardlist=$(echo ${slxconf_listnwmod}|sed "s/\ /|/g")
-# save results for later info and for Xen plugin when starting Xen VM
-hwinfo --netcard --usb-ctrl >/etc/hwinfo.netcard-usbctrl
-grep modprobe /etc/hwinfo.netcard-usbctrl | grep -E "$nwcardlist|hcd" | \
-  grep -v ehci | sed 's/.* Cmd: "//;s/"//' | sort -u >/etc/modprobe.base
-# virtio hack
-if [ $(grep -ic "virtio_pci" /etc/modprobe.base) -ge 1 ]; then
-  echo "modprobe virtio_net" >>/etc/modprobe.base
-fi
-sh /etc/modprobe.base; mdev -s
-
-# optimization possible: exclude network and usb base drivers from the
-# following list (bios detection for non-hwautocfg component)
-( hwinfo --pci >/etc/hwinfo.data; echo "read pci device list at $(sysup)" \
-    >/tmp/hwdataready ) &
-( usleep 100000 ; hwinfo --bios >/etc/hwinfo.bios ) &
-# for mounting partitions/devices with the "auto" option
-echo -e "ext3\next2\nreiserfs\nxfs\njfs\next4\nvfat" >/etc/filesystems
-# request a local block device for config and root filesystem (lbd://)
-if grep -iq '"lbd://' /proc/cmdline /etc/initramfs-setup; then
-  modprobe -a ${MODPRV} ehci_hcd usb-storage sd_mod
-  mdev -s
-fi
-return 0
-}
-
-#############################################################################
-# main part
-hwmain () {
-# activate the previously detected devices
-[ $DEBUGLEVEL -ge 2 ] || modloadbg=" >/dev/null 2>\&1"
-# check for rtc if not compiled directly into the kernel
-( [ -e /proc/driver/rtc ] || modprobe ${MODPRV} rtc-cmos ) &
-waitfor /tmp/hwdataready 10000
-sed '/Driver Info #1/,/Config Status:/d' \
-  /etc/hwinfo.data | grep modprobe | sed "s|.* Cmd: \"||;s|\"|$modloadbg|" \
-    | sort -u >/etc/modprobe.pci
-sh /etc/modprobe.pci
-mdev -s
-
-# bluetooth setup (start it later if present, depends on firmware availa-
-# bility, interpreted by servconfig)
-#( hwinfo --bluetooth >/etc/hwinfo.bt ) &
-
-# load harddisk driver and check for harddisk
-( grep -q -E "SCSI|SATA" /etc/hwinfo.data && modprobe ${MODPRV} sd_mod
-  grep -q -E  "IDE" /etc/hwinfo.data && modprobe ${MODPRV} ide-disk
-  hwinfo --disk | sed -n "/Device File: /p" | \
-    sed -e "s|.*Device File: /dev/||;s| .*||" >/etc/hwinfo.disk
-  echo "disk detection finished at $(sysup)" >/tmp/diskready; ) &
-[ $DEBUGLEVEL -eq 21 ] && echo "** finished 2nd hwdetection at $(sysup)"
-
-# load disk/optical high level drivers
-modprobe ${MODPRV} ide-cd 2>/dev/null
-modprobe ${MODPRV} sr_mod 2>/dev/null
-modprobe ${MODPRV} ide-floppy 2>/dev/null
-mdev -s
-
-# load kernel module for ps2 mice and map the mousehandler to /dev/input/mice
-( [ -f /lib/modules/${KERNEL}/kernel/drivers/input/mouse/psmouse.ko ] && \
-    modprobe ${MODPRV} psmouse 
-  [ -f /lib/modules/${KERNEL}/kernel/drivers/input/mousedev.ko ] && \
-    modprobe ${MODPRV} mousedev
-  testmkd /dev/input 
-  mknod /dev/input/mice c 13 63 2>/dev/null
-  hwinfo --mouse >/etc/hwinfo.mouse ) &
-
-# complete the audio configuration and load the dummy module if no audio
-# hardware is present in the machine
-grep -q -E "Audio|sound" /etc/hwinfo.data || modprobe snd-dummy
-modprobe ${MODPRV} snd-pcm-oss
-modprobe ${MODPRV} snd-mixer-oss
-#ln -s /proc/sound/oss/sndstat /dev/sndstat
-
-[ $DEBUGLEVEL -eq 21 ] && echo "** finished most of module loading at $(sysup)"
-
-# scanner setup (fixme: to be checked)
-hwinfo --scanner >/etc/hwinfo.scanner
-[ -f /tmp/scanner-udev ] && cat /tmp/scanner-udev \
-  >>/mnt/etc/udev/rules.d/04-scanner.rules
-
-# parallel port setup
-modprobe ${MODPRV} parport_pc && modprobe ${MODPRV} ppdev
-
-# if any new device appeared up to now
-mdev -s
-return 0
-}
-#############################################################################
-# harddisk partition setup part
-disk () {
-# get idea of availabe harddisk partitions, put swap partitions into
-# (/mnt)/etc/fstab and format and mount partitions of type 44 (unknown)
-[ $DEBUGLEVEL -eq 21 ] && echo "** starting hdd stuff at $(sysup)"
-waitfor /tmp/diskready 20000
-if [ -s /etc/hwinfo.disk ] ; then
-  for hd in $(cat /etc/hwinfo.disk) ; do
-    fdisk -l /dev/$hd|sed -n "/^\/dev\//p" >/etc/disk.partition
-    for hdpartnr in $(cat /etc/disk.partition | \
-        sed -n -e "/ 82 /p"|sed -e "s/[[:space:]].*//") ; do
-      echo -e "$hdpartnr\tswap\t\tswap\t\tdefaults\t 0 0" >>/tmp/fstab
-    done
-    # we use special non assigned partition type (id44) for harddisk scratch 
-    # space, thus no normal filesystem will be incidentally deleted or
-    # corrupted
-    for hdpartnr in $(cat /etc/disk.partition | \
-        sed -n -e "/ 44 /p"|sed -e "s/[[:space:]].*//") ; do
-      # check for supported filesystem and formatter
-      ( if diskfm $hdpartnr ; then
-          echo "$hdpartnr is mounted to /mnt/tmp at $(sysup)" >/tmp/tmpready
-          echo -e "$hdpartnr\t/tmp\t\tauto\t\tdefaults\t 0 0" >>/tmp/fstab
-        else
-          echo "formatting failed for some reason ($(sysup))" >/tmp/tmpready
-        fi ) &
-      part44=yes
-      break
-    done
-    # put detected linux partitions (83) into /etc/fstab with "noauto", 
-    # special partition 45 (persistent scratch) to /var/scratch and 46
-    # to /var/openslx
-    for partid in 83 45 46 ; do
-      for hdpartnr in $(cat /etc/disk.partition | \
-          sed -n -e "/ ${partid} /p"|sed -e "s/[[:space:]].*//") ; do
-        mkdir -p /mnt/media/${hdpartnr#/dev/*} 2>/dev/null
-        if [ ${partid} -eq 83 ] ; then
-          echo -e "$hdpartnr\t/media/${hdpartnr#/dev/*}\tauto\t\tnoauto,\
-noexec\t 0 0" >>/tmp/fstab
-        elif [ ${partid} -eq 45 ] ; then
-          # if more than one id45 present, the latter ones are simply mounted
-          # over the previous (the mounts are postponed a bit via do_mnt to
-          # have the filesystem completely prepared) 
-          echo -e "waitfor ${hdpartnr} 4000\n\
-            mount -t auto ${hdpartnr} /mnt/media/${hdpartnr#/dev/*}\n\
-            ln -sf /media/${hdpartnr#/dev/*} /mnt/var/scratch" >>/etc/do_mnt
-          echo -e "${hdpartnr}\t/media/${hdpartnr#/dev/*}\tauto\t\tnoauto\
-\t\t 0 0" >>/tmp/fstab
-        elif [ ${partid} -eq 46 ] ; then
-          # mount a home directory to (/mnt)/var/home
-          echo -e "waitfor ${hdpartnr} 4000\n\
-            mount -t auto ${hdpartnr} /mnt/media/${hdpartnr#/dev/*} \n\
-            test -d /mnt/media/${hdpartnr#/dev/*}/home && \
-              ln -sf /media/${hdpartnr#/dev/*} /mnt/var/home" >>/etc/do_mnt
-          echo -e "${hdpartnr}\t/media/${hdpartnr#/dev/*}\tauto\t\tnoauto\
-\t\t 0 0" >>/tmp/fstab
-        fi
-      done
-    done
-    # add 
-    [ -f /etc/do_mnt ] && sed -e "1i. /etc/functions" -i /etc/do_mnt
-  done
-  # determine if tmp preparation should wait for format/mount or not
-  [ -z "$part44" ] && echo "finished at $(sysup)" >/tmp/tmpready
-else
-  echo "no harddisk found ( $(sysup) )" >/tmp/tmpready
-fi
-[ $DEBUGLEVEL -eq 21 ] && echo "** finished hdd stuff at $(sysup)"
-}
-
-#############################################################################
-# cleanup/finishing part
-finish () {
-mdev -s
-# mount filesystem parts (if any) requested in disk setup
-[ -f /etc/do_mnt ] && sh /etc/do_mnt &
-# remove unneeded disk and mouse drivers
-[ ! -s /etc/hwinfo.disk ] && rmmod sd_mod 2>/dev/null
-#grep -q " PS/2 " /etc/hwinfo.mouse || \
-#  { rmmod psmouse 2>/dev/null; rm /dev/psaux 2>/dev/null; }
-# more sophistication possible :)
-# remove /sbin/mdev as not available in stage4
-echo >/proc/sys/kernel/hotplug
-return 0
-}
-
-#############################################################################
-# main script starts here
-
-# functions common for all distros
-. /etc/functions
-# functions common for all distros, messages contains all error and
-# info output
-. /etc/messages
-# load distro specific configuration variables and functions. distro
-# specific functions may overwrite functions defined in /etc/functions
-. /etc/distro-functions
-# source general slx and initramfs-setup settings
-. /etc/slxsystem.conf
-. /etc/initramfs-setup
-
-# script run timer
-[ $DEBUGLEVEL -eq 8 -o $DEBUGLEVEL -eq 21 ] && \
-  echo "** HW $1 setup started at $(sysup)"
-
-# heavy debugging output in level 3 and above and specific for 11
-[ $DEBUGLEVEL -gt 3 -a $DEBUGLEVEL -lt 8 -o $DEBUGLEVEL -eq 11 ] && \
-  set -x
-
-case $1 in
-  # pre initialization: loading USB base and network adaptor modules,
-  # detection of other pci bus modules
-  base)
-    base
-  ;;
-  # main part of hardware setup of pci stuff
-  main)
-    hwmain
-    # main script run timer or debug information
-    [ $DEBUGLEVEL -eq 8 -o $DEBUGLEVEL -eq 21 ] && \
-      echo "** HW main setup finished at $(sysup)"
-    echo "hwsetup main part finished at $(sysup)" >/tmp/hwcfg
-  ;;
-  # disk setup part (detecting general id82,83 and slx id44,45,46, formatting 
-  # if required and mounting)
-  disk)
-    # try to enable compressed RAM SWAP
-    if modprobe ${MODPRV} ramzswap && [ -f /usr/bin/rzscontrol ] ; then
-      mdev -s
-      rzscontrol /dev/ramzswap0 --init
-      swapon /dev/ramzswap0
-      #hdswap="# disk swap disabled because of enabled compressed ramswap"
-    fi
-    # if disk action is not disabled
-    if [ "x${hw_local_disk}" != "xno" ] ; then
-      disk
-    else
-      echo "using harddisk switched off by hw_local_disk set to 'no' ( $(sysup) )" \
-        >/tmp/tmpready
-    fi
-  ;;
-  # remove unneeded kernel modules
-  finish)
-    finish
-  ;;
-esac