// SPDX-License-Identifier: GPL-2.0
//
// Copyright (c) 2006 Simtec Electronics
// Ben Dooks <ben@simtec.co.uk>
//
// http://armlinux.simtec.co.uk/.
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/syscore_ops.h>
#include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/reboot.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <asm/system_misc.h>
#include <mach/hardware.h>
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
#include <plat/cpu.h>
#include <plat/cpu-freq.h>
#include <plat/devs.h>
#include <plat/pm.h>
#include <plat/regs-spi.h>
#include "common.h"
#include "nand-core.h"
#include "regs-dsc.h"
#include "s3c2412-power.h"
#ifndef CONFIG_CPU_S3C2412_ONLY
void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
static inline void s3c2412_init_gpio2(void)
{
s3c24xx_va_gpio2 = S3C24XX_VA_GPIO + 0x10;
}
#else
#define s3c2412_init_gpio2() do { } while(0)
#endif
/* Initial IO mappings */
static struct map_desc s3c2412_iodesc[] __initdata = {
IODESC_ENT(CLKPWR),
IODESC_ENT(TIMER),
IODESC_ENT(WATCHDOG),
{
.virtual = (unsigned long)S3C2412_VA_SSMC,
.pfn = __phys_to_pfn(S3C2412_PA_SSMC),
.length = SZ_1M,
.type = MT_DEVICE,
},
{
.virtual = (unsigned long)S3C2412_VA_EBI,
.pfn = __phys_to_pfn(S3C2412_PA_EBI),
.length = SZ_1M,
.type = MT_DEVICE,
},
};
/* uart registration process */
void __init s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no)
{
s3c24xx_init_uartdevs("s3c2412-uart", s3c2410_uart_resources, cfg, no);
/* rename devices that are s3c2412/s3c2413 specific */
s3c_device_sdi.name = "s3c2412-sdi";
s3c_device_lcd.name = "s3c2412-lcd";
s3c_nand_setname("s3c2412-nand");
/* alter IRQ of SDI controller */
s3c_device_sdi.resource[1].start = IRQ_S3C2412_SDI;
s3c_device_sdi.resource[1].end = IRQ_S3C2412_SDI;
/* spi channel related changes, s3c2412/13 specific */
s3c_device_spi0.name = "s3c2412-spi";
s3c_device_spi0.resource[0].end = S3C24XX_PA_SPI + 0x24;
s3c_device_spi1.name = "s3c2412-spi";
s3c_device_spi1.resource[0].start = S3C24XX_PA_SPI + S3C2412_SPI1;
s3c_device_spi1.resource[0].end = S3C24XX_PA_SPI + S3C2412_SPI1 + 0x24;
}
/* s3c2412_idle
*
* use the standard idle call by ensuring the idle mode
* in power config, then issuing the idle co-processor
* instruction
*/
static void s3c2412_idle(void)
{
unsigned long tmp;
/* ensure our idle mode is to go to idle */
tmp = __raw_readl(S3C2412_PWRCFG);
tmp &= ~S3C2412_PWRCFG_STANDBYWFI_MASK;
tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE;
__raw_writel(tmp, S3C2412_PWRCFG);
cpu_do_idle();
}
/* s3c2412_map_io
*
* register the standard cpu IO areas, and any passed in from the
* machine specific initialisation.
*/
void __init s3c2412_map_io(void)
{
/* move base of IO */
s3c2412_init_gpio2();
/* set our idle function */
arm_pm_idle = s3c2412_idle;
/* register our io-tables */
iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc));
}
/* need to register the subsystem before we actually register the device, and
* we also need to ensure that it has been initialised before any of the
* drivers even try to use it (even if not on an s3c2412 based system)
* as a driver which may support both 2410 and 2440 may try and use it.
*/
struct bus_type s3c2412_subsys = {
.name = "s3c2412-core",
.dev_name = "s3c2412-core",
};
static int __init s3c2412_core_init(void)
{
return subsys_system_register(&s3c2412_subsys, NULL);
}
core_initcall(s3c2412_core_init);
static struct device s3c2412_dev = {
.bus = &s3c2412_subsys,
};
int __init s3c2412_init(void)
{
printk("S3C2412: Initialising architecture\n");
#ifdef CONFIG_PM_SLEEP
register_syscore_ops(&s3c2412_pm_syscore_ops);
register_syscore_ops(&s3c24xx_irq_syscore_ops);
#endif
return device_register(&s3c2412_dev);
}
