/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
* Copyright (C) 2004-2009 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
* *
* This program is free software; you can redistribute it and/or *
* modify it under the terms of version 2 of the GNU General *
* Public License as published by the Free Software Foundation. *
* This program is distributed in the hope that it will be useful. *
* ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
* WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
* FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
* DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
* TO BE LEGALLY INVALID. See the GNU General Public License for *
* more details, a copy of which can be found in the file COPYING *
* included with this package. *
*******************************************************************/
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/idr.h>
#include <linux/interrupt.h>
#include <linux/kthread.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/ctype.h>
#include <linux/aer.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
#include "lpfc.h"
#include "lpfc_logmsg.h"
#include "lpfc_crtn.h"
#include "lpfc_vport.h"
#include "lpfc_version.h"
char *_dump_buf_data;
unsigned long _dump_buf_data_order;
char *_dump_buf_dif;
unsigned long _dump_buf_dif_order;
spinlock_t _dump_buf_lock;
static void lpfc_get_hba_model_desc(struct lpfc_hba *, uint8_t *, uint8_t *);
static int lpfc_post_rcv_buf(struct lpfc_hba *);
static int lpfc_sli4_queue_create(struct lpfc_hba *);
static void lpfc_sli4_queue_destroy(struct lpfc_hba *);
static int lpfc_create_bootstrap_mbox(struct lpfc_hba *);
static int lpfc_setup_endian_order(struct lpfc_hba *);
static int lpfc_sli4_read_config(struct lpfc_hba *);
static void lpfc_destroy_bootstrap_mbox(struct lpfc_hba *);
static void lpfc_free_sgl_list(struct lpfc_hba *);
static int lpfc_init_sgl_list(struct lpfc_hba *);
static int lpfc_init_active_sgl_array(struct lpfc_hba *);
static void lpfc_free_active_sgl(struct lpfc_hba *);
static int lpfc_hba_down_post_s3(struct lpfc_hba *phba);
static int lpfc_hba_down_post_s4(struct lpfc_hba *phba);
static int lpfc_sli4_cq_event_pool_create(struct lpfc_hba *);
static void lpfc_sli4_cq_event_pool_destroy(struct lpfc_hba *);
static void lpfc_sli4_cq_event_release_all(struct lpfc_hba *);
static struct scsi_transport_template *lpfc_transport_template = NULL;
static struct scsi_transport_template *lpfc_vport_transport_template = NULL;
static DEFINE_IDR(lpfc_hba_index);
/**
* lpfc_config_port_prep - Perform lpfc initialization prior to config port
* @phba: pointer to lpfc hba data structure.
*
* This routine will do LPFC initialization prior to issuing the CONFIG_PORT
* mailbox command. It retrieves the revision information from the HBA and
* collects the Vital Product Data (VPD) about the HBA for preparing the
* configuration of the HBA.
*
* Return codes:
* 0 - success.
* -ERESTART - requests the SLI layer to reset the HBA and try again.
* Any other value - indicates an error.
**/
int
lpfc_config_port_prep(struct lpfc_hba *phba)
{
lpfc_vpd_t *vp = &phba->vpd;
int i = 0, rc;
LPFC_MBOXQ_t *pmb;
MAILBOX_t *mb;
char *lpfc_vpd_data = NULL;
uint16_t offset = 0;
static char licensed[56] =
"key unlock for use with gnu public licensed code only\0";
static int init_key = 1;
pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!pmb) {
phba->link_state = LPFC_HBA_ERROR;
return -ENOMEM;
}
mb = &pmb->u.mb;
phba->link_state = LPFC_INIT_MBX_CMDS;
if (lpfc_is_LC_HBA(phba->pcidev->device)) {
if (init_key) {
uint32_t *ptext = (uint32_t *) licensed;
for (i = 0; i < 56; i += sizeof (uint32_t), ptext++)
*ptext = cpu_to_be32(*ptext);
init_key = 0;
}
lpfc_read_nv(phba, pmb);
memset((char*)mb->un.varRDnvp.rsvd3, 0,
sizeof (mb->un.varRDnvp.rsvd3));
memcpy((char*)mb->un.varRDnvp.rsvd3, licensed,
sizeof (licensed));
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
if (rc != MBX_SUCCESS) {
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
"0324 Config Port initialization "
"error, mbxCmd x%x READ_NVPARM, "
"mbxStatus x%x\n",
mb->mbxCommand, mb->mbxStatus);
mempool_free(pmb, phba->mbox_mem_pool);
return -ERESTART;
}
memcpy(phba->wwnn, (char *)mb->un.varRDnvp.nodename,
sizeof(phba->wwnn));
memcpy(phba->wwpn, (char *)mb->un.varRDnvp.portname,
sizeof(phba->wwpn));
}
phba->sli3_options = 0x0;
/* Setup and issue mailbox READ REV command */
lpfc_read_rev(phba, pmb);
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
if (rc != MBX_SUCCESS) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0439 Adapter failed to init, mbxCmd x%x "
"READ_REV, mbxStatus x%x\n",
mb->mbxCommand, mb->mbxStatus);
mempool_free( pmb, phba->mbox_mem_pool);
return -ERESTART;
}
/*
* The value of rr must be 1 since the driver set the cv field to 1.
* This setting requires the FW to set all revision fields.
*/
if (mb->un.varRdRev.rr == 0) {
vp->rev.rBit = 0;
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0440 Adapter failed to init, READ_REV has "
"missing revision information.\n");
mempool_free(pmb, phba->mbox_mem_pool);
return -ERESTART;
}
if (phba->sli_rev == 3 && !mb->un.varRdRev.v3rsp) {
mempool_free(pmb, phba->mbox_mem_pool);
return -EINVAL;
}
/* Save information as VPD data */
vp->rev.rBit = 1;
memcpy(&vp->sli3Feat, &mb->un.varRdRev.sli3Feat, sizeof(uint32_t));
vp->rev.sli1FwRev = mb->un.varRdRev.sli1FwRev;
memcpy(vp->rev.sli1FwName, (char*) mb->un.varRdRev.sli1FwName, 16);
vp->rev.sli2FwRev = mb->un.varRdRev.sli2FwRev;
memcpy(vp->rev.sli2FwName, (char *) mb->un.varRdRev.sli2FwName, 16);
vp->rev.biuRev = mb->un.varRdRev.biuRev;
vp->rev.smRev = mb->un.varRdRev.smRev;
vp->rev.smFwRev = mb->un.varRdRev.un.smFwRev;
vp->rev.endecRev = mb->un.varRdRev.endecRev;
vp->rev.fcphHigh = mb->un.varRdRev.fcphHigh;
vp->rev.fcphLow = mb->un.varRdRev.fcphLow;
vp->rev.feaLevelHigh = mb->un.varRdRev.feaLevelHigh;
vp->rev.feaLevelLow = mb->un.varRdRev.feaLevelLow;
vp->rev.postKernRev = mb->un.varRdRev.postKernRev;
vp->rev.opFwRev = mb->un.varRdRev.opFwRev;
/* If the sli feature level is less then 9, we must
* tear down all RPIs and VPIs on link down if NPIV
* is enabled.
*/
if (vp->rev.feaLevelHigh < 9)
phba->sli3_options |= LPFC_SLI3_VPORT_TEARDOWN;
if (lpfc_is_LC_HBA(phba->pcidev->device))
memcpy(phba->RandomData, (char *)&mb->un.varWords[24],
sizeof (phba->RandomData));
/* Get adapter VPD information */
lpfc_vpd_data = kmalloc(DMP_VPD_SIZE, GFP_KERNEL);
if (!lpfc_vpd_data)
goto out_free_mbox;
do {
lpfc_dump_mem(phba, pmb, offset, DMP_REGION_VPD);
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
if (rc != MBX_SUCCESS) {
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0441 VPD not present on adapter, "
"mbxCmd x%x DUMP VPD, mbxStatus x%x\n",
mb->mbxCommand, mb->mbxStatus);
mb->un.varDmp.word_cnt = 0;
}
/* dump mem may return a zero when finished or we got a
* mailbox error, either way we are done.
*/
if (mb->un.varDmp.word_cnt == 0)
break;
if (mb->un.varDmp.word_cnt > DMP_VPD_SIZE - offset)
mb->un.varDmp.word_cnt = DMP_VPD_SIZE - offset;
lpfc_sli_pcimem_bcopy(((uint8_t *)mb) + DMP_RSP_OFFSET,
lpfc_vpd_data + offset,
mb->un.varDmp.word_cnt);
offset += mb->un.varDmp.word_cnt;
} while (mb->un.varDmp.word_cnt && offset < DMP_VPD_SIZE);
lpfc_parse_vpd(phba, lpfc_vpd_data, offset);
kfree(lpfc_vpd_data);
out_free_mbox:
mempool_free(pmb, phba->mbox_mem_pool);
return 0;
}
/**
* lpfc_config_async_cmpl - Completion handler for config async event mbox cmd
* @phba: pointer to lpfc hba data structure.
* @pmboxq: pointer to the driver internal queue element for mailbox command.
*
* This is the completion handler for driver's configuring asynchronous event
* mailbox command to the device. If the mailbox command returns successfully,
* it will set internal async event support flag to 1; otherwise, it will
* set internal async event support flag to 0.
**/
static void
lpfc_config_async_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq)
{
if (pmboxq->u.mb.mbxStatus == MBX_SUCCESS)
phba->temp_sensor_support = 1;
else
phba->temp_sensor_support = 0;
mempool_free(pmboxq, phba->mbox_mem_pool);
return;
}
/**
* lpfc_dump_wakeup_param_cmpl - dump memory mailbox command completion handler
* @phba: pointer to lpfc hba data structure.
* @pmboxq: pointer to the driver internal queue element for mailbox command.
*
* This is the completion handler for dump mailbox command for getting
* wake up parameters. When this command complete, the response contain
* Option rom version of the HBA. This function translate the version number
* into a human readable string and store it in OptionROMVersion.
**/
static void
lpfc_dump_wakeup_param_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
{
struct prog_id *prg;
uint32_t prog_id_word;
char dist = ' ';
/* character array used for decoding dist type. */
char dist_char[] = "nabx";
if (pmboxq->u.mb.mbxStatus != MBX_SUCCESS) {
mempool_free(pmboxq, phba->mbox_mem_pool);
return;
}
prg = (struct prog_id *) &prog_id_word;
/* word 7 contain option rom version */
prog_id_word = pmboxq->u.mb.un.varWords[7];
/* Decode the Option rom version word to a readable string */
if (prg->dist < 4)
dist = dist_char[prg->dist];
if ((prg->dist == 3) && (prg->num == 0))
sprintf(phba->OptionROMVersion, "%d.%d%d",
prg->ver, prg->rev, prg->lev);
else
sprintf(phba->OptionROMVersion, "%d.%d%d%c%d",
prg->ver, prg->rev, prg->lev,
dist, prg->num);
mempool_free(pmboxq, phba->mbox_mem_pool);
return;
}
/**
* lpfc_config_port_post - Perform lpfc initialization after config port
* @phba: pointer to lpfc hba data structure.
*
* This routine will do LPFC initialization after the CONFIG_PORT mailbox
* command call. It performs all internal resource and state setups on the
* port: post IOCB buffers, enable appropriate host interrupt attentions,
* ELS ring timers, etc.
*
* Return codes
* 0 - success.
* Any other value - error.
**/
int
lpfc_config_port_post(struct lpfc_hba *phba)
{
struct lpfc_vport *vport = phba->pport;
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
LPFC_MBOXQ_t *pmb;
MAILBOX_t *mb;
struct lpfc_dmabuf *mp;
struct lpfc_sli *psli = &phba->sli;
uint32_t status, timeout;
int i, j;
int rc;
spin_lock_irq(&phba->hbalock);
/*
* If the Config port completed correctly the HBA is not
* over heated any more.
*/
if (phba->over_temp_state == HBA_OVER_TEMP)
phba->over_temp_state = HBA_NORMAL_TEMP;
spin_unlock_irq(&phba->hbalock);
pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!pmb) {
phba->link_state = LPFC_HBA_ERROR;
return -ENOMEM;
}
mb = &pmb->u.mb;
/* Get login parameters for NID. */
lpfc_read_sparam(phba, pmb, 0);
pmb->vport = vport;
if (lpfc_sli_issue_mbox(phba, pmb, MBX_POLL) != MBX_SUCCESS) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0448 Adapter failed init, mbxCmd x%x "
"READ_SPARM mbxStatus x%x\n",
mb->mbxCommand, mb->mbxStatus);
phba->link_state = LPFC_HBA_ERROR;
mp = (struct lpfc_dmabuf *) pmb->context1;
mempool_free( pmb, phba->mbox_mem_pool);
lpfc_mbuf_free(phba, mp->virt, mp->phys);
kfree(mp);
return -EIO;
}
mp = (struct lpfc_dmabuf *) pmb->context1;
memcpy(&vport->fc_sparam, mp->virt, sizeof (struct serv_parm));
lpfc_mbuf_free(phba, mp->virt, mp->phys);
kfree(mp);
pmb->context1 = NULL;
if (phba->cfg_soft_wwnn)
u64_to_wwn(phba->cfg_soft_wwnn,
vport->fc_sparam.nodeName.u.wwn);
if (phba->cfg_soft_wwpn)
u64_to_wwn(phba->cfg_soft_wwpn,
vport->fc_sparam.portName.u.wwn);
memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName,
sizeof (struct lpfc_name));
memcpy(&vport->fc_portname, &vport->fc_sparam.portName,
sizeof (struct lpfc_name));
/* Update the fc_host data structures with new wwn. */
fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn);
fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn);
fc_host_max_npiv_vports(shost) = phba->max_vpi;
/* If no serial number in VPD data, use low 6 bytes of WWNN */
/* This should be consolidated into parse_vpd ? - mr */
if (phba->SerialNumber[0] == 0) {
uint8_t *outptr;
outptr = &vport->fc_nodename.u.s.IEEE[0];
for (i = 0; i < 12; i++) {
status = *outptr++;
j = ((status & 0xf0) >> 4);
if (j <= 9)
phba->SerialNumber[i] =
(char)((uint8_t) 0x30 + (uint8_t) j);
else
phba->SerialNumber[i] =
(char)((uint8_t) 0x61 + (uint8_t) (j - 10));
i++;
j = (status & 0xf);
if (j <= 9)
phba->SerialNumber[i] =
(char)((uint8_t) 0x30 + (uint8_t) j);
else
phba->SerialNumber[i] =
(char)((uint8_t) 0x61 + (uint8_t) (j - 10));
}
}
lpfc_read_config(phba, pmb);
pmb->vport = vport;
if (lpfc_sli_issue_mbox(phba, pmb, MBX_POLL) != MBX_SUCCESS) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0453 Adapter failed to init, mbxCmd x%x "
"READ_CONFIG, mbxStatus x%x\n",
mb->mbxCommand, mb->mbxStatus);
phba->link_state = LPFC_HBA_ERROR;
mempool_free( pmb, phba->mbox_mem_pool);
return -EIO;
}
/* Check if the port is disabled */
lpfc_sli_read_link_ste(phba);
/* Reset the DFT_HBA_Q_DEPTH to the max xri */
if (phba->cfg_hba_queue_depth > (mb->un.varRdConfig.max_xri+1))
phba->cfg_hba_queue_depth =
(mb->un.varRdConfig.max_xri + 1) -
lpfc_sli4_get_els_iocb_cnt(phba);
phba->lmt = mb->un.varRdConfig.lmt;
/* Get the default values for Model Name and Description */
lpfc_get_hba_model_desc(phba, phba->ModelName, phba->ModelDesc);
if ((phba->cfg_link_speed > LINK_SPEED_10G)
|| ((phba->cfg_link_speed == LINK_SPEED_1G)
&& !(phba->lmt & LMT_1Gb))
|| ((phba->cfg_link_speed == LINK_SPEED_2G)
&& !(phba->lmt & LMT_2Gb))
|| ((phba->cfg_link_speed == LINK_SPEED_4G)
&& !(phba->lmt & LMT_4Gb))
|| ((phba->cfg_link_speed == LINK_SPEED_8G)
&& !(phba->lmt & LMT_8Gb))
|| ((phba->cfg_link_speed == LINK_SPEED_10G)
&& !(phba->lmt & LMT_10Gb))) {
/* Reset link speed to auto */
lpfc_printf_log(phba, KERN_WARNING, LOG_LINK_EVENT,
"1302 Invalid speed for this board: "
"Reset link speed to auto: x%x\n",
phba->cfg_link_speed);
phba->cfg_link_speed = LINK_SPEED_AUTO;
}
phba->link_state = LPFC_LINK_DOWN;
/* Only process IOCBs on ELS ring till hba_state is READY */
if (psli->ring[psli->extra_ring].cmdringaddr)
psli->ring[psli->extra_ring].flag |= LPFC_STOP_IOCB_EVENT;
if (psli->ring[psli->fcp_ring].cmdringaddr)
psli->ring[psli->fcp_ring].flag |= LPFC_STOP_IOCB_EVENT;
if (psli->ring[psli->next_ring].cmdringaddr)
psli->ring[psli->next_ring].flag |= LPFC_STOP_IOCB_EVENT;
/* Post receive buffers for desired rings */
if (phba->sli_rev != 3)
lpfc_post_rcv_buf(phba);
/*
* Configure HBA MSI-X attention conditions to messages if MSI-X mode
*/
if (phba->intr_type == MSIX) {
rc = lpfc_config_msi(phba, pmb);
if (rc) {
mempool_free(pmb, phba->mbox_mem_pool);
return -EIO;
}
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
if (rc != MBX_SUCCESS) {
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
"0352 Config MSI mailbox command "
"failed, mbxCmd x%x, mbxStatus x%x\n",
pmb->u.mb.mbxCommand,
pmb->u.mb.mbxStatus);
mempool_free(pmb, phba->mbox_mem_pool);
return -EIO;
}
}
spin_lock_irq(&phba->hbalock);
/* Initialize ERATT handling flag */
phba->hba_flag &= ~HBA_ERATT_HANDLED;
/* Enable appropriate host interrupts */
status = readl(phba->HCregaddr);
status |= HC_MBINT_ENA | HC_ERINT_ENA | HC_LAINT_ENA;
if (psli->num_rings > 0)
status |= HC_R0INT_ENA;
if (psli->num_rings > 1)
status |= HC_R1INT_ENA;
if (psli->num_rings > 2)
status |= HC_R2INT_ENA;
if (psli->num_rings > 3)
status |= HC_R3INT_ENA;
if ((phba->cfg_poll & ENABLE_FCP_RING_POLLING) &&
(phba->cfg_poll & DISABLE_FCP_RING_INT))
status &= ~(HC_R0INT_ENA);
writel(status, phba->HCregaddr);
readl(phba->HCregaddr); /* flush */
spin_unlock_irq(&phba->hbalock);
/* Set up ring-0 (ELS) timer */
timeout = phba->fc_ratov * 2;
mod_timer(&vport->els_tmofunc, jiffies + HZ * timeout);
/* Set up heart beat (HB) timer */
mod_timer(&phba->hb_tmofunc, jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
phba->hb_outstanding = 0;
phba->last_completion_time = jiffies;
/* Set up error attention (ERATT) polling timer */
mod_timer(&phba->eratt_poll, jiffies + HZ * LPFC_ERATT_POLL_INTERVAL);
if (phba->hba_flag & LINK_DISABLED) {
lpfc_printf_log(phba,
KERN_ERR, LOG_INIT,
"2598 Adapter Link is disabled.\n");
lpfc_down_link(phba, pmb);
pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
if ((rc != MBX_SUCCESS) && (rc != MBX_BUSY)) {
lpfc_printf_log(phba,
KERN_ERR, LOG_INIT,
"2599 Adapter failed to issue DOWN_LINK"
" mbox command rc 0x%x\n", rc);
mempool_free(pmb, phba->mbox_mem_pool);
return -EIO;
}
} else {
lpfc_init_link(phba, pmb, phba->cfg_topology,
phba->cfg_link_speed);
pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
lpfc_set_loopback_flag(phba);
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
if (rc != MBX_SUCCESS) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0454 Adapter failed to init, mbxCmd x%x "
"INIT_LINK, mbxStatus x%x\n",
mb->mbxCommand, mb->mbxStatus);
/* Clear all interrupt enable conditions */
writel(0, phba->HCregaddr);
readl(phba->HCregaddr); /* flush */
/* Clear all pending interrupts */
writel(0xffffffff, phba->HAregaddr);
readl(phba->HAregaddr); /* flush */
phba->link_state = LPFC_HBA_ERROR;
if (rc != MBX_BUSY)
mempool_free(pmb, phba->mbox_mem_pool);
return -EIO;
}
}
/* MBOX buffer will be freed in mbox compl */
pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
lpfc_config_async(phba, pmb, LPFC_ELS_RING);
pmb->mbox_cmpl = lpfc_config_async_cmpl;
pmb->vport = phba->pport;
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
if ((rc != MBX_BUSY) && (rc != MBX_SUCCESS)) {
lpfc_printf_log(phba,
KERN_ERR,
LOG_INIT,
"0456 Adapter failed to issue "
"ASYNCEVT_ENABLE mbox status x%x\n",
rc);
mempool_free(pmb, phba->mbox_mem_pool);
}
/* Get Option rom version */
pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
lpfc_dump_wakeup_param(phba, pmb);
pmb->mbox_cmpl = lpfc_dump_wakeup_param_cmpl;
pmb->vport = phba->pport;
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
if ((rc != MBX_BUSY) && (rc != MBX_SUCCESS)) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0435 Adapter failed "
"to get Option ROM version status x%x\n", rc);
mempool_free(pmb, phba->mbox_mem_pool);
}
return 0;
}
/**
* lpfc_hba_down_prep - Perform lpfc uninitialization prior to HBA reset
* @phba: pointer to lpfc HBA data structure.
*
* This routine will do LPFC uninitialization before the HBA is reset when
* bringing down the SLI Layer.
*
* Return codes
* 0 - success.
* Any other value - error.
**/
int
lpfc_hba_down_prep(struct lpfc_hba *phba)
{
struct lpfc_vport **vports;
int i;
if (phba->sli_rev <= LPFC_SLI_REV3) {
/* Disable interrupts */
writel(0, phba->HCregaddr);
readl(phba->HCregaddr); /* flush */
}
if (phba->pport->load_flag & FC_UNLOADING)
lpfc_cleanup_discovery_resources(phba->pport);
else {
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
for (i = 0; i <= phba->max_vports &&
vports[i] != NULL; i++)
lpfc_cleanup_discovery_resources(vports[i]);
lpfc_destroy_vport_work_array(phba, vports);
}
return 0;
}
/**
* lpfc_hba_down_post_s3 - Perform lpfc uninitialization after HBA reset
* @phba: pointer to lpfc HBA data structure.
*
* This routine will do uninitialization after the HBA is reset when bring
* down the SLI Layer.
*
* Return codes
* 0 - sucess.
* Any other value - error.
**/
static int
lpfc_hba_down_post_s3(struct lpfc_hba *phba)
{
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring;
struct lpfc_dmabuf *mp, *next_mp;
LIST_HEAD(completions);
int i;
if (phba->sli3_options & LPFC_SLI3_HBQ_ENABLED)
lpfc_sli_hbqbuf_free_all(phba);
else {
/* Cleanup preposted buffers on the ELS ring */
pring = &psli->ring[LPFC_ELS_RING];
list_for_each_entry_safe(mp, next_mp, &pring->postbufq, list) {
list_del(&mp->list);
pring->postbufq_cnt--;
lpfc_mbuf_free(phba, mp->virt, mp->phys);
kfree(mp);
}
}
spin_lock_irq(&phba->hbalock);
for (i = 0; i < psli->num_rings; i++) {
pring = &psli->ring[i];
/* At this point in time the HBA is either reset or DOA. Either
* way, nothing should be on txcmplq as it will NEVER complete.
*/
list_splice_init(&pring->txcmplq, &completions);
pring->txcmplq_cnt = 0;
spin_unlock_irq(&phba->hbalock);
/* Cancel all the IOCBs from the completions list */
lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
IOERR_SLI_ABORTED);
lpfc_sli_abort_iocb_ring(phba, pring);
spin_lock_irq(&phba->hbalock);
}
spin_unlock_irq(&phba->hbalock);
return 0;
}
/**
* lpfc_hba_down_post_s4 - Perform lpfc uninitialization after HBA reset
* @phba: pointer to lpfc HBA data structure.
*
* This routine will do uninitialization after the HBA is reset when bring
* down the SLI Layer.
*
* Return codes
* 0 - sucess.
* Any other value - error.
**/
static int
lpfc_hba_down_post_s4(struct lpfc_hba *phba)
{
struct lpfc_scsi_buf *psb, *psb_next;
LIST_HEAD(aborts);
int ret;
unsigned long iflag = 0;
ret = lpfc_hba_down_post_s3(phba);
if (ret)
return ret;
/* At this point in time the HBA is either reset or DOA. Either
* way, nothing should be on lpfc_abts_els_sgl_list, it needs to be
* on the lpfc_sgl_list so that it can either be freed if the
* driver is unloading or reposted if the driver is restarting
* the port.
*/
spin_lock_irq(&phba->hbalock); /* required for lpfc_sgl_list and */
/* scsl_buf_list */
/* abts_sgl_list_lock required because worker thread uses this
* list.
*/
spin_lock(&phba->sli4_hba.abts_sgl_list_lock);
list_splice_init(&phba->sli4_hba.lpfc_abts_els_sgl_list,
&phba->sli4_hba.lpfc_sgl_list);
spin_unlock(&phba->sli4_hba.abts_sgl_list_lock);
/* abts_scsi_buf_list_lock required because worker thread uses this
* list.
*/
spin_lock(&phba->sli4_hba.abts_scsi_buf_list_lock);
list_splice_init(&phba->sli4_hba.lpfc_abts_scsi_buf_list,
&aborts);
spin_unlock(&phba->sli4_hba.abts_scsi_buf_list_lock);
spin_unlock_irq(&phba->hbalock);
list_for_each_entry_safe(psb, psb_next, &aborts, list) {
psb->pCmd = NULL;
psb->status = IOSTAT_SUCCESS;
}
spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag);
list_splice(&aborts, &phba->lpfc_scsi_buf_list);
spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag);
return 0;
}
/**
* lpfc_hba_down_post - Wrapper func for hba down post routine
* @phba: pointer to lpfc HBA data structure.
*
* This routine wraps the actual SLI3 or SLI4 routine for performing
* uninitialization after the HBA is reset when bring down the SLI Layer.
*
* Return codes
* 0 - sucess.
* Any other value - error.
**/
int
lpfc_hba_down_post(struct lpfc_hba *phba)
{
return (*phba->lpfc_hba_down_post)(phba);
}
/**
* lpfc_hb_timeout - The HBA-timer timeout handler
* @ptr: unsigned long holds the pointer to lpfc hba data structure.
*
* This is the HBA-timer timeout handler registered to the lpfc driver. When
* this timer fires, a HBA timeout event shall be posted to the lpfc driver
* work-port-events bitmap and the worker thread is notified. This timeout
* event will be used by the worker thread to invoke the actual timeout
* handler routine, lpfc_hb_timeout_handler. Any periodical operations will
* be performed in the timeout handler and the HBA timeout event bit shall
* be cleared by the worker thread after it has taken the event bitmap out.
**/
static void
lpfc_hb_timeout(unsigned long ptr)
{
struct lpfc_hba *phba;
uint32_t tmo_posted;
unsigned long iflag;
phba = (struct lpfc_hba *)ptr;
/* Check for heart beat timeout conditions */
spin_lock_irqsave(&phba->pport->work_port_lock, iflag);
tmo_posted = phba->pport->work_port_events & WORKER_HB_TMO;
if (!tmo_posted)
phba->pport->work_port_events |= WORKER_HB_TMO;
spin_unlock_irqrestore(&phba->pport->work_port_lock, iflag);
/* Tell the worker thread there is work to do */
if (!tmo_posted)
lpfc_worker_wake_up(phba);
return;
}
/**
* lpfc_hb_mbox_cmpl - The lpfc heart-beat mailbox command callback function
* @phba: pointer to lpfc hba data structure.
* @pmboxq: pointer to the driver internal queue element for mailbox command.
*
* This is the callback function to the lpfc heart-beat mailbox command.
* If configured, the lpfc driver issues the heart-beat mailbox command to
* the HBA every LPFC_HB_MBOX_INTERVAL (current 5) seconds. At the time the
* heart-beat mailbox command is issued, the driver shall set up heart-beat
* timeout timer to LPFC_HB_MBOX_TIMEOUT (current 30) seconds and marks
* heart-beat outstanding state. Once the mailbox command comes back and
* no error conditions detected, the heart-beat mailbox command timer is
* reset to LPFC_HB_MBOX_INTERVAL seconds and the heart-beat outstanding
* state is cleared for the next heart-beat. If the timer expired with the
* heart-beat outstanding state set, the driver will put the HBA offline.
**/
static void
lpfc_hb_mbox_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq)
{
unsigned long drvr_flag;
spin_lock_irqsave(&phba->hbalock, drvr_flag);
phba->hb_outstanding = 0;
spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
/* Check and reset heart-beat timer is necessary */
mempool_free(pmboxq, phba->mbox_mem_pool);
if (!(phba->pport->fc_flag & FC_OFFLINE_MODE) &&
!(phba->link_state == LPFC_HBA_ERROR) &&
!(phba->pport->load_flag & FC_UNLOADING))
mod_timer(&phba->hb_tmofunc,
jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
return;
}
/**
* lpfc_hb_timeout_handler - The HBA-timer timeout handler
* @phba: pointer to lpfc hba data structure.
*
* This is the actual HBA-timer timeout handler to be invoked by the worker
* thread whenever the HBA timer fired and HBA-timeout event posted. This
* handler performs any periodic operations needed for the device. If such
* periodic event has already been attended to either in the interrupt handler
* or by processing slow-ring or fast-ring events within the HBA-timer
* timeout window (LPFC_HB_MBOX_INTERVAL), this handler just simply resets
* the timer for the next timeout period. If lpfc heart-beat mailbox command
* is configured and there is no heart-beat mailbox command outstanding, a
* heart-beat mailbox is issued and timer set properly. Otherwise, if there
* has been a heart-beat mailbox command outstanding, the HBA shall be put
* to offline.
**/
void
lpfc_hb_timeout_handler(struct lpfc_hba *phba)
{
struct lpfc_vport **vports;
LPFC_MBOXQ_t *pmboxq;
struct lpfc_dmabuf *buf_ptr;
int retval, i;
struct lpfc_sli *psli = &phba->sli;
LIST_HEAD(completions);
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++)
lpfc_rcv_seq_check_edtov(vports[i]);
lpfc_destroy_vport_work_array(phba, vports);
if ((phba->link_state == LPFC_HBA_ERROR) ||
(phba->pport->load_flag & FC_UNLOADING) ||
(phba->pport->fc_flag & FC_OFFLINE_MODE))
return;
spin_lock_irq(&phba->pport->work_port_lock);
if (time_after(phba->last_completion_time + LPFC_HB_MBOX_INTERVAL * HZ,
jiffies)) {
spin_unlock_irq(&phba->pport->work_port_lock);
if (!phba->hb_outstanding)
mod_timer(&phba->hb_tmofunc,
jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
else
mod_timer(&phba->hb_tmofunc,
jiffies + HZ * LPFC_HB_MBOX_TIMEOUT);
return;
}
spin_unlock_irq(&phba->pport->work_port_lock);
if (phba->elsbuf_cnt &&
(phba->elsbuf_cnt == phba->elsbuf_prev_cnt)) {
spin_lock_irq(&phba->hbalock);
list_splice_init(&phba->elsbuf, &completions);
phba->elsbuf_cnt = 0;
phba->elsbuf_prev_cnt = 0;
spin_unlock_irq(&phba->hbalock);
while (!list_empty(&completions)) {
list_remove_head(&completions, buf_ptr,
struct lpfc_dmabuf, list);
lpfc_mbuf_free(phba, buf_ptr->virt, buf_ptr->phys);
kfree(buf_ptr);
}
}
phba->elsbuf_prev_cnt = phba->elsbuf_cnt;
/* If there is no heart beat outstanding, issue a heartbeat command */
if (phba->cfg_enable_hba_heartbeat) {
if (!phba->hb_outstanding) {
pmboxq = mempool_alloc(phba->mbox_mem_pool,GFP_KERNEL);
if (!pmboxq) {
mod_timer(&phba->hb_tmofunc,
jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
return;
}
lpfc_heart_beat(phba, pmboxq);
pmboxq->mbox_cmpl = lpfc_hb_mbox_cmpl;
pmboxq->vport = phba->pport;
retval = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT);
if (retval != MBX_BUSY && retval != MBX_SUCCESS) {
mempool_free(pmboxq, phba->mbox_mem_pool);
mod_timer(&phba->hb_tmofunc,
jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
return;
}
mod_timer(&phba->hb_tmofunc,
jiffies + HZ * LPFC_HB_MBOX_TIMEOUT);
phba->hb_outstanding = 1;
return;
} else {
/*
* If heart beat timeout called with hb_outstanding set
* we need to take the HBA offline.
*/
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0459 Adapter heartbeat failure, "
"taking this port offline.\n");
spin_lock_irq(&phba->hbalock);
psli->sli_flag &= ~LPFC_SLI_ACTIVE;
spin_unlock_irq(&phba->hbalock);
lpfc_offline_prep(phba);
lpfc_offline(phba);
lpfc_unblock_mgmt_io(phba);
phba->link_state = LPFC_HBA_ERROR;
lpfc_hba_down_post(phba);
}
}
}
/**
* lpfc_offline_eratt - Bring lpfc offline on hardware error attention
* @phba: pointer to lpfc hba data structure.
*
* This routine is called to bring the HBA offline when HBA hardware error
* other than Port Error 6 has been detected.
**/
static void
lpfc_offline_eratt(struct lpfc_hba *phba)
{
struct lpfc_sli *psli = &phba->sli;
spin_lock_irq(&phba->hbalock);
psli->sli_flag &= ~LPFC_SLI_ACTIVE;
spin_unlock_irq(&phba->hbalock);
lpfc_offline_prep(phba);
lpfc_offline(phba);
lpfc_reset_barrier(phba);
spin_lock_irq(&phba->hbalock);
lpfc_sli_brdreset(phba);
spin_unlock_irq(&phba->hbalock);
lpfc_hba_down_post(phba);
lpfc_sli_brdready(phba, HS_MBRDY);
lpfc_unblock_mgmt_io(phba);
phba->link_state = LPFC_HBA_ERROR;
return;
}
/**
* lpfc_sli4_offline_eratt - Bring lpfc offline on SLI4 hardware error attention
* @phba: pointer to lpfc hba data structure.
*
* This routine is called to bring a SLI4 HBA offline when HBA hardware error
* other than Port Error 6 has been detected.
**/
static void
lpfc_sli4_offline_eratt(struct lpfc_hba *phba)
{
lpfc_offline_prep(phba);
lpfc_offline(phba);
lpfc_sli4_brdreset(phba);
lpfc_hba_down_post(phba);
lpfc_sli4_post_status_check(phba);
lpfc_unblock_mgmt_io(phba);
phba->link_state = LPFC_HBA_ERROR;
}
/**
* lpfc_handle_deferred_eratt - The HBA hardware deferred error handler
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to handle the deferred HBA hardware error
* conditions. This type of error is indicated by HBA by setting ER1
* and another ER bit in the host status register. The driver will
* wait until the ER1 bit clears before handling the error condition.
**/
static void
lpfc_handle_deferred_eratt(struct lpfc_hba *phba)
{
uint32_t old_host_status = phba->work_hs;
struct lpfc_sli_ring *pring;
struct lpfc_sli *psli = &phba->sli;
/* If the pci channel is offline, ignore possible errors,
* since we cannot communicate with the pci card anyway.
*/
if (pci_channel_offline(phba->pcidev)) {
spin_lock_irq(&phba->hbalock);
phba->hba_flag &= ~DEFER_ERATT;
spin_unlock_irq(&phba->hbalock);
return;
}
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0479 Deferred Adapter Hardware Error "
"Data: x%x x%x x%x\n",
phba->work_hs,
phba->work_status[0], phba->work_status[1]);
spin_lock_irq(&phba->hbalock);
psli->sli_flag &= ~LPFC_SLI_ACTIVE;
spin_unlock_irq(&phba->hbalock);
/*
* Firmware stops when it triggred erratt. That could cause the I/Os
* dropped by the firmware. Error iocb (I/O) on txcmplq and let the
* SCSI layer retry it after re-establishing link.
*/
pring = &psli->ring[psli->fcp_ring];
lpfc_sli_abort_iocb_ring(phba, pring);
/*
* There was a firmware error. Take the hba offline and then
* attempt to restart it.
*/
lpfc_offline_prep(phba);
lpfc_offline(phba);
/* Wait for the ER1 bit to clear.*/
while (phba->work_hs & HS_FFER1) {
msleep(100);
phba->work_hs = readl(phba->HSregaddr);
/* If driver is unloading let the worker thread continue */
if (phba->pport->load_flag & FC_UNLOADING) {
phba->work_hs = 0;
break;
}
}
/*
* This is to ptrotect against a race condition in which
* first write to the host attention register clear the
* host status register.
*/
if ((!phba->work_hs) && (!(phba->pport->load_flag & FC_UNLOADING)))
phba->work_hs = old_host_status & ~HS_FFER1;
spin_lock_irq(&phba->hbalock);
phba->hba_flag &= ~DEFER_ERATT;
spin_unlock_irq(&phba->hbalock);
phba->work_status[0] = readl(phba->MBslimaddr + 0xa8);
phba->work_status[1] = readl(phba->MBslimaddr + 0xac);
}
static void
lpfc_board_errevt_to_mgmt(struct lpfc_hba *phba)
{
struct lpfc_board_event_header board_event;
struct Scsi_Host *shost;
board_event.event_type = FC_REG_BOARD_EVENT;
board_event.subcategory = LPFC_EVENT_PORTINTERR;
shost = lpfc_shost_from_vport(phba->pport);
fc_host_post_vendor_event(shost, fc_get_event_number(),
sizeof(board_event),
(char *) &board_event,
LPFC_NL_VENDOR_ID);
}
/**
* lpfc_handle_eratt_s3 - The SLI3 HBA hardware error handler
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to handle the following HBA hardware error
* conditions:
* 1 - HBA error attention interrupt
* 2 - DMA ring index out of range
* 3 - Mailbox command came back as unknown
**/
static void
lpfc_handle_eratt_s3(struct lpfc_hba *phba)
{
struct lpfc_vport *vport = phba->pport;
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring;
uint32_t event_data;
unsigned long temperature;
struct temp_event temp_event_data;
struct Scsi_Host *shost;
/* If the pci channel is offline, ignore possible errors,
* since we cannot communicate with the pci card anyway.
*/
if (pci_channel_offline(phba->pcidev)) {
spin_lock_irq(&phba->hbalock);
phba->hba_flag &= ~DEFER_ERATT;
spin_unlock_irq(&phba->hbalock);
return;
}
/* If resets are disabled then leave the HBA alone and return */
if (!phba->cfg_enable_hba_reset)
return;
/* Send an internal error event to mgmt application */
lpfc_board_errevt_to_mgmt(phba);
if (phba->hba_flag & DEFER_ERATT)
lpfc_handle_deferred_eratt(phba);
if (phba->work_hs & HS_FFER6) {
/* Re-establishing Link */
lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT,
"1301 Re-establishing Link "
"Data: x%x x%x x%x\n",
phba->work_hs,
phba->work_status[0], phba->work_status[1]);
spin_lock_irq(&phba->hbalock);
psli->sli_flag &= ~LPFC_SLI_ACTIVE;
spin_unlock_irq(&phba->hbalock);
/*
* Firmware stops when it triggled erratt with HS_FFER6.
* That could cause the I/Os dropped by the firmware.
* Error iocb (I/O) on txcmplq and let the SCSI layer
* retry it after re-establishing link.
*/
pring = &psli->ring[psli->fcp_ring];
lpfc_sli_abort_iocb_ring(phba, pring);
/*
* There was a firmware error. Take the hba offline and then
* attempt to restart it.
*/
lpfc_offline_prep(phba);
lpfc_offline(phba);
lpfc_sli_brdrestart(phba);
if (lpfc_online(phba) == 0) { /* Initialize the HBA */
lpfc_unblock_mgmt_io(phba);
return;
}
lpfc_unblock_mgmt_io(phba);
} else if (phba->work_hs & HS_CRIT_TEMP) {
temperature = readl(phba->MBslimaddr + TEMPERATURE_OFFSET);
temp_event_data.event_type = FC_REG_TEMPERATURE_EVENT;
temp_event_data.event_code = LPFC_CRIT_TEMP;
temp_event_data.data = (uint32_t)temperature;
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0406 Adapter maximum temperature exceeded "
"(%ld), taking this port offline "
"Data: x%x x%x x%x\n",
temperature, phba->work_hs,
phba->work_status[0], phba->work_status[1]);
shost = lpfc_shost_from_vport(phba->pport);
fc_host_post_vendor_event(shost, fc_get_event_number(),
sizeof(temp_event_data),
(char *) &temp_event_data,
SCSI_NL_VID_TYPE_PCI
| PCI_VENDOR_ID_EMULEX);
spin_lock_irq(&phba->hbalock);
phba->over_temp_state = HBA_OVER_TEMP;
spin_unlock_irq(&phba->hbalock);
lpfc_offline_eratt(phba);
} else {
/* The if clause above forces this code path when the status
* failure is a value other than FFER6. Do not call the offline
* twice. This is the adapter hardware error path.
*/
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0457 Adapter Hardware Error "
"Data: x%x x%x x%x\n",
phba->work_hs,
phba->work_status[0], phba->work_status[1]);
event_data = FC_REG_DUMP_EVENT;
shost = lpfc_shost_from_vport(vport);
fc_host_post_vendor_event(shost, fc_get_event_number(),
sizeof(event_data), (char *) &event_data,
SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX);
lpfc_offline_eratt(phba);
}
return;
}
/**
* lpfc_handle_eratt_s4 - The SLI4 HBA hardware error handler
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to handle the SLI4 HBA hardware error attention
* conditions.
**/
static void
lpfc_handle_eratt_s4(struct lpfc_hba *phba)
{
struct lpfc_vport *vport = phba->pport;
uint32_t event_data;
struct Scsi_Host *shost;
/* If the pci channel is offline, ignore possible errors, since
* we cannot communicate with the pci card anyway.
*/
if (pci_channel_offline(phba->pcidev))
return;
/* If resets are disabled then leave the HBA alone and return */
if (!phba->cfg_enable_hba_reset)
return;
/* Send an internal error event to mgmt application */
lpfc_board_errevt_to_mgmt(phba);
/* For now, the actual action for SLI4 device handling is not
* specified yet, just treated it as adaptor hardware failure
*/
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0143 SLI4 Adapter Hardware Error Data: x%x x%x\n",
phba->work_status[0], phba->work_status[1]);
event_data = FC_REG_DUMP_EVENT;
shost = lpfc_shost_from_vport(vport);
fc_host_post_vendor_event(shost, fc_get_event_number(),
sizeof(event_data), (char *) &event_data,
SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX);
lpfc_sli4_offline_eratt(phba);
}
/**
* lpfc_handle_eratt - Wrapper func for handling hba error attention
* @phba: pointer to lpfc HBA data structure.
*
* This routine wraps the actual SLI3 or SLI4 hba error attention handling
* routine from the API jump table function pointer from the lpfc_hba struct.
*
* Return codes
* 0 - sucess.
* Any other value - error.
**/
void
lpfc_handle_eratt(struct lpfc_hba *phba)
{
(*phba->lpfc_handle_eratt)(phba);
}
/**
* lpfc_handle_latt - The HBA link event handler
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked from the worker thread to handle a HBA host
* attention link event.
**/
void
lpfc_handle_latt(struct lpfc_hba *phba)
{
struct lpfc_vport *vport = phba->pport;
struct lpfc_sli *psli = &phba->sli;
LPFC_MBOXQ_t *pmb;
volatile uint32_t control;
struct lpfc_dmabuf *mp;
int rc = 0;
pmb = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!pmb) {
rc = 1;
goto lpfc_handle_latt_err_exit;
}
mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
if (!mp) {
rc = 2;
goto lpfc_handle_latt_free_pmb;
}
mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys);
if (!mp->virt) {
rc = 3;
goto lpfc_handle_latt_free_mp;
}
/* Cleanup any outstanding ELS commands */
lpfc_els_flush_all_cmd(phba);
psli->slistat.link_event++;
lpfc_read_la(phba, pmb, mp);
pmb->mbox_cmpl = lpfc_mbx_cmpl_read_la;
pmb->vport = vport;
/* Block ELS IOCBs until we have processed this mbox command */
phba->sli.ring[LPFC_ELS_RING].flag |= LPFC_STOP_IOCB_EVENT;
rc = lpfc_sli_issue_mbox (phba, pmb, MBX_NOWAIT);
if (rc == MBX_NOT_FINISHED) {
rc = 4;
goto lpfc_handle_latt_free_mbuf;
}
/* Clear Link Attention in HA REG */
spin_lock_irq(&phba->hbalock);
writel(HA_LATT, phba->HAregaddr);
readl(phba->HAregaddr); /* flush */
spin_unlock_irq(&phba->hbalock);
return;
lpfc_handle_latt_free_mbuf:
phba->sli.ring[LPFC_ELS_RING].flag &= ~LPFC_STOP_IOCB_EVENT;
lpfc_mbuf_free(phba, mp->virt, mp->phys);
lpfc_handle_latt_free_mp:
kfree(mp);
lpfc_handle_latt_free_pmb:
mempool_free(pmb, phba->mbox_mem_pool);
lpfc_handle_latt_err_exit:
/* Enable Link attention interrupts */
spin_lock_irq(&phba->hbalock);
psli->sli_flag |= LPFC_PROCESS_LA;
control = readl(phba->HCregaddr);
control |= HC_LAINT_ENA;
writel(control, phba->HCregaddr);
readl(phba->HCregaddr); /* flush */
/* Clear Link Attention in HA REG */
writel(HA_LATT, phba->HAregaddr);
readl(phba->HAregaddr); /* flush */
spin_unlock_irq(&phba->hbalock);
lpfc_linkdown(phba);
phba->link_state = LPFC_HBA_ERROR;
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
"0300 LATT: Cannot issue READ_LA: Data:%d\n", rc);
return;
}
/**
* lpfc_parse_vpd - Parse VPD (Vital Product Data)
* @phba: pointer to lpfc hba data structure.
* @vpd: pointer to the vital product data.
* @len: length of the vital product data in bytes.
*
* This routine parses the Vital Product Data (VPD). The VPD is treated as
* an array of characters. In this routine, the ModelName, ProgramType, and
* ModelDesc, etc. fields of the phba data structure will be populated.
*
* Return codes
* 0 - pointer to the VPD passed in is NULL
* 1 - success
**/
int
lpfc_parse_vpd(struct lpfc_hba *phba, uint8_t *vpd, int len)
{
uint8_t lenlo, lenhi;
int Length;
int i, j;
int finished = 0;
int index = 0;
if (!vpd)
return 0;
/* Vital Product */
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0455 Vital Product Data: x%x x%x x%x x%x\n",
(uint32_t) vpd[0], (uint32_t) vpd[1], (uint32_t) vpd[2],
(uint32_t) vpd[3]);
while (!finished && (index < (len - 4))) {
switch (vpd[index]) {
case 0x82:
case 0x91:
index += 1;
lenlo = vpd[index];
index += 1;
lenhi = vpd[index];
index += 1;
i = ((((unsigned short)lenhi) << 8) + lenlo);
index += i;
break;
case 0x90:
index += 1;
lenlo = vpd[index];
index += 1;
lenhi = vpd[index];
index += 1;
Length = ((((unsigned short)lenhi) << 8) + lenlo);
if (Length > len - index)
Length = len - index;
while (Length > 0) {
/* Look for Serial Number */
if ((vpd[index] == 'S') && (vpd[index+1] == 'N')) {
index += 2;
i = vpd[index];
index += 1;
j = 0;
Length -= (3+i);
while(i--) {
phba->SerialNumber[j++] = vpd[index++];
if (j == 31)
break;
}
phba->SerialNumber[j] = 0;
continue;
}
else if ((vpd[index] == 'V') && (vpd[index+1] == '1')) {
phba->vpd_flag |= VPD_MODEL_DESC;
index += 2;
i = vpd[index];
index += 1;
j = 0;
Length -= (3+i);
while(i--) {
phba->ModelDesc[j++] = vpd[index++];
if (j == 255)
break;
}
phba->ModelDesc[j] = 0;
continue;
}
else if ((vpd[index] == 'V') && (vpd[index+1] == '2')) {
phba->vpd_flag |= VPD_MODEL_NAME;
index += 2;
i = vpd[index];
index += 1;
j = 0;
Length -= (3+i);
while(i--) {
phba->ModelName[j++] = vpd[index++];
if (j == 79)
break;
}
phba->ModelName[j] = 0;
continue;
}
else if ((vpd[index] == 'V') && (vpd[index+1] == '3')) {
phba->vpd_flag |= VPD_PROGRAM_TYPE;
index += 2;
i = vpd[index];
index += 1;
j = 0;
Length -= (3+i);
while(i--) {
phba->ProgramType[j++] = vpd[index++];
if (j == 255)
break;
}
phba->ProgramType[j] = 0;
continue;
}
else if ((vpd[index] == 'V') && (vpd[index+1] == '4')) {
phba->vpd_flag |= VPD_PORT;
index += 2;
i = vpd[index];
index += 1;
j = 0;
Length -= (3+i);
while(i--) {
phba->Port[j++] = vpd[index++];
if (j == 19)
break;
}
phba->Port[j] = 0;
continue;
}
else {
index += 2;
i = vpd[index];
index += 1;
index += i;
Length -= (3 + i);
}
}
finished = 0;
break;
case 0x78:
finished = 1;
break;
default:
index ++;
break;
}
}
return(1);
}
/**
* lpfc_get_hba_model_desc - Retrieve HBA device model name and description
* @phba: pointer to lpfc hba data structure.
* @mdp: pointer to the data structure to hold the derived model name.
* @descp: pointer to the data structure to hold the derived description.
*
* This routine retrieves HBA's description based on its registered PCI device
* ID. The @descp passed into this function points to an array of 256 chars. It
* shall be returned with the model name, maximum speed, and the host bus type.
* The @mdp passed into this function points to an array of 80 chars. When the
* function returns, the @mdp will be filled with the model name.
**/
static void
lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
{
lpfc_vpd_t *vp;
uint16_t dev_id = phba->pcidev->device;
int max_speed;
int GE = 0;
int oneConnect = 0; /* default is not a oneConnect */
struct {
char * name;
int max_speed;
char * bus;
} m = {"<Unknown>", 0, ""};
if (mdp && mdp[0] != '\0'
&& descp && descp[0] != '\0')
return;
if (phba->lmt & LMT_10Gb)
max_speed = 10;
else if (phba->lmt & LMT_8Gb)
max_speed = 8;
else if (phba->lmt & LMT_4Gb)
max_speed = 4;
else if (phba->lmt & LMT_2Gb)
max_speed = 2;
else
max_speed = 1;
vp = &phba->vpd;
switch (dev_id) {
case PCI_DEVICE_ID_FIREFLY:
m = (typeof(m)){"LP6000", max_speed, "PCI"};
break;
case PCI_DEVICE_ID_SUPERFLY:
if (vp->rev.biuRev >= 1 && vp->rev.biuRev <= 3)
m = (typeof(m)){"LP7000", max_speed, "PCI"};
else
m = (typeof(m)){"LP7000E", max_speed, "PCI"};
break;
case PCI_DEVICE_ID_DRAGONFLY:
m = (typeof(m)){"LP8000", max_speed, "PCI"};
break;
case PCI_DEVICE_ID_CENTAUR:
if (FC_JEDEC_ID(vp->rev.biuRev) == CENTAUR_2G_JEDEC_ID)
m = (typeof(m)){"LP9002", max_speed, "PCI"};
else
m = (typeof(m)){"LP9000", max_speed, "PCI"};
break;
case PCI_DEVICE_ID_RFLY:
m = (typeof(m)){"LP952", max_speed, "PCI"};
break;
case PCI_DEVICE_ID_PEGASUS:
m = (typeof(m)){"LP9802", max_speed, "PCI-X"};
break;
case PCI_DEVICE_ID_THOR:
m = (typeof(m)){"LP10000", max_speed, "PCI-X"};
break;
case PCI_DEVICE_ID_VIPER:
m = (typeof(m)){"LPX1000", max_speed, "PCI-X"};
break;
case PCI_DEVICE_ID_PFLY:
m = (typeof(m)){"LP982", max_speed, "PCI-X"};
break;
case PCI_DEVICE_ID_TFLY:
m = (typeof(m)){"LP1050", max_speed, "PCI-X"};
break;
case PCI_DEVICE_ID_HELIOS:
m = (typeof(m)){"LP11000", max_speed, "PCI-X2"};
break;
case PCI_DEVICE_ID_HELIOS_SCSP:
m = (typeof(m)){"LP11000-SP", max_speed, "PCI-X2"};
break;
case PCI_DEVICE_ID_HELIOS_DCSP:
m = (typeof(m)){"LP11002-SP", max_speed, "PCI-X2"};
break;
case PCI_DEVICE_ID_NEPTUNE:
m = (typeof(m)){"LPe1000", max_speed, "PCIe"};
break;
case PCI_DEVICE_ID_NEPTUNE_SCSP:
m = (typeof(m)){"LPe1000-SP", max_speed, "PCIe"};
break;
case PCI_DEVICE_ID_NEPTUNE_DCSP:
m = (typeof(m)){"LPe1002-SP", max_speed, "PCIe"};
break;
case PCI_DEVICE_ID_BMID:
m = (typeof(m)){"LP1150", max_speed, "PCI-X2"};
break;
case PCI_DEVICE_ID_BSMB:
m = (typeof(m)){"LP111", max_speed, "PCI-X2"};
break;
case PCI_DEVICE_ID_ZEPHYR:
m = (typeof(m)){"LPe11000", max_speed, "PCIe"};
break;
case PCI_DEVICE_ID_ZEPHYR_SCSP:
m = (typeof(m)){"LPe11000", max_speed, "PCIe"};
break;
case PCI_DEVICE_ID_ZEPHYR_DCSP:
m = (typeof(m)){"LP2105", max_speed, "PCIe"};
GE = 1;
break;
case PCI_DEVICE_ID_ZMID:
m = (typeof(m)){"LPe1150", max_speed, "PCIe"};
break;
case PCI_DEVICE_ID_ZSMB:
m = (typeof(m)){"LPe111", max_speed, "PCIe"};
break;
case PCI_DEVICE_ID_LP101:
m = (typeof(m)){"LP101", max_speed, "PCI-X"};
break;
case PCI_DEVICE_ID_LP10000S:
m = (typeof(m)){"LP10000-S", max_speed, "PCI"};
break;
case PCI_DEVICE_ID_LP11000S:
m = (typeof(m)){"LP11000-S", max_speed,
"PCI-X2"};
break;
case PCI_DEVICE_ID_LPE11000S:
m = (typeof(m)){"LPe11000-S", max_speed,
"PCIe"};
break;
case PCI_DEVICE_ID_SAT:
m = (typeof(m)){"LPe12000", max_speed, "PCIe"};
break;
case PCI_DEVICE_ID_SAT_MID:
m = (typeof(m)){"LPe1250", max_speed, "PCIe"};
break;
case PCI_DEVICE_ID_SAT_SMB:
m = (typeof(m)){"LPe121", max_speed, "PCIe"};
break;
case PCI_DEVICE_ID_SAT_DCSP:
m = (typeof(m)){"LPe12002-SP", max_speed, "PCIe"};
break;
case PCI_DEVICE_ID_SAT_SCSP:
m = (typeof(m)){"LPe12000-SP", max_speed, "PCIe"};
break;
case PCI_DEVICE_ID_SAT_S:
m = (typeof(m)){"LPe12000-S", max_speed, "PCIe"};
break;
case PCI_DEVICE_ID_HORNET:
m = (typeof(m)){"LP21000", max_speed, "PCIe"};
GE = 1;
break;
case PCI_DEVICE_ID_PROTEUS_VF:
m = (typeof(m)) {"LPev12000", max_speed, "PCIe IOV"};
break;
case PCI_DEVICE_ID_PROTEUS_PF:
m = (typeof(m)) {"LPev12000", max_speed, "PCIe IOV"};
break;
case PCI_DEVICE_ID_PROTEUS_S:
m = (typeof(m)) {"LPemv12002-S", max_speed, "PCIe IOV"};
break;
case PCI_DEVICE_ID_TIGERSHARK:
oneConnect = 1;
m = (typeof(m)) {"OCe10100-F", max_speed, "PCIe"};
break;
case PCI_DEVICE_ID_TS_BE3:
oneConnect = 1;
m = (typeof(m)) {"OCeXXXXX-F", max_speed, "PCIe"};
break;
default:
m = (typeof(m)){ NULL };
break;
}
if (mdp && mdp[0] == '\0')
snprintf(mdp, 79,"%s", m.name);
/* oneConnect hba requires special processing, they are all initiators
* and we put the port number on the end
*/
if (descp && descp[0] == '\0') {
if (oneConnect)
snprintf(descp, 255,
"Emulex OneConnect %s, FCoE Initiator, Port %s",
m.name,
phba->Port);
else
snprintf(descp, 255,
"Emulex %s %d%s %s %s",
m.name, m.max_speed,
(GE) ? "GE" : "Gb",
m.bus,
(GE) ? "FCoE Adapter" :
"Fibre Channel Adapter");
}
}
/**
* lpfc_post_buffer - Post IOCB(s) with DMA buffer descriptor(s) to a IOCB ring
* @phba: pointer to lpfc hba data structure.
* @pring: pointer to a IOCB ring.
* @cnt: the number of IOCBs to be posted to the IOCB ring.
*
* This routine posts a given number of IOCBs with the associated DMA buffer
* descriptors specified by the cnt argument to the given IOCB ring.
*
* Return codes
* The number of IOCBs NOT able to be posted to the IOCB ring.
**/
int
lpfc_post_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, int cnt)
{
IOCB_t *icmd;
struct lpfc_iocbq *iocb;
struct lpfc_dmabuf *mp1, *mp2;
cnt += pring->missbufcnt;
/* While there are buffers to post */
while (cnt > 0) {
/* Allocate buffer for command iocb */
iocb = lpfc_sli_get_iocbq(phba);
if (iocb == NULL) {
pring->missbufcnt = cnt;
return cnt;
}
icmd = &iocb->iocb;
/* 2 buffers can be posted per command */
/* Allocate buffer to post */
mp1 = kmalloc(sizeof (struct lpfc_dmabuf), GFP_KERNEL);
if (mp1)
mp1->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &mp1->phys);
if (!mp1 || !mp1->virt) {
kfree(mp1);
lpfc_sli_release_iocbq(phba, iocb);
pring->missbufcnt = cnt;
return cnt;
}
INIT_LIST_HEAD(&mp1->list);
/* Allocate buffer to post */
if (cnt > 1) {
mp2 = kmalloc(sizeof (struct lpfc_dmabuf), GFP_KERNEL);
if (mp2)
mp2->virt = lpfc_mbuf_alloc(phba, MEM_PRI,
&mp2->phys);
if (!mp2 || !mp2->virt) {
kfree(mp2);
lpfc_mbuf_free(phba, mp1->virt, mp1->phys);
kfree(mp1);
lpfc_sli_release_iocbq(phba, iocb);
pring->missbufcnt = cnt;
return cnt;
}
INIT_LIST_HEAD(&mp2->list);
} else {
mp2 = NULL;
}
icmd->un.cont64[0].addrHigh = putPaddrHigh(mp1->phys);
icmd->un.cont64[0].addrLow = putPaddrLow(mp1->phys);
icmd->un.cont64[0].tus.f.bdeSize = FCELSSIZE;
icmd->ulpBdeCount = 1;
cnt--;
if (mp2) {
icmd->un.cont64[1].addrHigh = putPaddrHigh(mp2->phys);
icmd->un.cont64[1].addrLow = putPaddrLow(mp2->phys);
icmd->un.cont64[1].tus.f.bdeSize = FCELSSIZE;
cnt--;
icmd->ulpBdeCount = 2;
}
icmd->ulpCommand = CMD_QUE_RING_BUF64_CN;
icmd->ulpLe = 1;
if (lpfc_sli_issue_iocb(phba, pring->ringno, iocb, 0) ==
IOCB_ERROR) {
lpfc_mbuf_free(phba, mp1->virt, mp1->phys);
kfree(mp1);
cnt++;
if (mp2) {
lpfc_mbuf_free(phba, mp2->virt, mp2->phys);
kfree(mp2);
cnt++;
}
lpfc_sli_release_iocbq(phba, iocb);
pring->missbufcnt = cnt;
return cnt;
}
lpfc_sli_ringpostbuf_put(phba, pring, mp1);
if (mp2)
lpfc_sli_ringpostbuf_put(phba, pring, mp2);
}
pring->missbufcnt = 0;
return 0;
}
/**
* lpfc_post_rcv_buf - Post the initial receive IOCB buffers to ELS ring
* @phba: pointer to lpfc hba data structure.
*
* This routine posts initial receive IOCB buffers to the ELS ring. The
* current number of initial IOCB buffers specified by LPFC_BUF_RING0 is
* set to 64 IOCBs.
*
* Return codes
* 0 - success (currently always success)
**/
static int
lpfc_post_rcv_buf(struct lpfc_hba *phba)
{
struct lpfc_sli *psli = &phba->sli;
/* Ring 0, ELS / CT buffers */
lpfc_post_buffer(phba, &psli->ring[LPFC_ELS_RING], LPFC_BUF_RING0);
/* Ring 2 - FCP no buffers needed */
return 0;
}
#define S(N,V) (((V)<<(N))|((V)>>(32-(N))))
/**
* lpfc_sha_init - Set up initial array of hash table entries
* @HashResultPointer: pointer to an array as hash table.
*
* This routine sets up the initial values to the array of hash table entries
* for the LC HBAs.
**/
static void
lpfc_sha_init(uint32_t * HashResultPointer)
{
HashResultPointer[0] = 0x67452301;
HashResultPointer[1] = 0xEFCDAB89;
HashResultPointer[2] = 0x98BADCFE;
HashResultPointer[3] = 0x10325476;
HashResultPointer[4] = 0xC3D2E1F0;
}
/**
* lpfc_sha_iterate - Iterate initial hash table with the working hash table
* @HashResultPointer: pointer to an initial/result hash table.
* @HashWorkingPointer: pointer to an working hash table.
*
* This routine iterates an initial hash table pointed by @HashResultPointer
* with the values from the working hash table pointeed by @HashWorkingPointer.
* The results are putting back to the initial hash table, returned through
* the @HashResultPointer as the result hash table.
**/
static void
lpfc_sha_iterate(uint32_t * HashResultPointer, uint32_t * HashWorkingPointer)
{
int t;
uint32_t TEMP;
uint32_t A, B, C, D, E;
t = 16;
do {
HashWorkingPointer[t] =
S(1,
HashWorkingPointer[t - 3] ^ HashWorkingPointer[t -
8] ^
HashWorkingPointer[t - 14] ^ HashWorkingPointer[t - 16]);
} while (++t <= 79);
t = 0;
A = HashResultPointer[0];
B = HashResultPointer[1];
C = HashResultPointer[2];
D = HashResultPointer[3];
E = HashResultPointer[4];
do {
if (t < 20) {
TEMP = ((B & C) | ((~B) & D)) + 0x5A827999;
} else if (t < 40) {
TEMP = (B ^ C ^ D) + 0x6ED9EBA1;
} else if (t < 60) {
TEMP = ((B & C) | (B & D) | (C & D)) + 0x8F1BBCDC;
} else {
TEMP = (B ^ C ^ D) + 0xCA62C1D6;
}
TEMP += S(5, A) + E + HashWorkingPointer[t];
E = D;
D = C;
C = S(30, B);
B = A;
A = TEMP;
} while (++t <= 79);
HashResultPointer[0] += A;
HashResultPointer[1] += B;
HashResultPointer[2] += C;
HashResultPointer[3] += D;
HashResultPointer[4] += E;
}
/**
* lpfc_challenge_key - Create challenge key based on WWPN of the HBA
* @RandomChallenge: pointer to the entry of host challenge random number array.
* @HashWorking: pointer to the entry of the working hash array.
*
* This routine calculates the working hash array referred by @HashWorking
* from the challenge random numbers associated with the host, referred by
* @RandomChallenge. The result is put into the entry of the working hash
* array and returned by reference through @HashWorking.
**/
static void
lpfc_challenge_key(uint32_t * RandomChallenge, uint32_t * HashWorking)
{
*HashWorking = (*RandomChallenge ^ *HashWorking);
}
/**
* lpfc_hba_init - Perform special handling for LC HBA initialization
* @phba: pointer to lpfc hba data structure.
* @hbainit: pointer to an array of unsigned 32-bit integers.
*
* This routine performs the special handling for LC HBA initialization.
**/
void
lpfc_hba_init(struct lpfc_hba *phba, uint32_t *hbainit)
{
int t;
uint32_t *HashWorking;
uint32_t *pwwnn = (uint32_t *) phba->wwnn;
HashWorking = kcalloc(80, sizeof(uint32_t), GFP_KERNEL);
if (!HashWorking)
return;
HashWorking[0] = HashWorking[78] = *pwwnn++;
HashWorking[1] = HashWorking[79] = *pwwnn;
for (t = 0; t < 7; t++)
lpfc_challenge_key(phba->RandomData + t, HashWorking + t);
lpfc_sha_init(hbainit);
lpfc_sha_iterate(hbainit, HashWorking);
kfree(HashWorking);
}
/**
* lpfc_cleanup - Performs vport cleanups before deleting a vport
* @vport: pointer to a virtual N_Port data structure.
*
* This routine performs the necessary cleanups before deleting the @vport.
* It invokes the discovery state machine to perform necessary state
* transitions and to release the ndlps associated with the @vport. Note,
* the physical port is treated as @vport 0.
**/
void
lpfc_cleanup(struct lpfc_vport *vport)
{
struct lpfc_hba *phba = vport->phba;
struct lpfc_nodelist *ndlp, *next_ndlp;
int i = 0;
if (phba->link_state > LPFC_LINK_DOWN)
lpfc_port_link_failure(vport);
list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
if (!NLP_CHK_NODE_ACT(ndlp)) {
ndlp = lpfc_enable_node(vport, ndlp,
NLP_STE_UNUSED_NODE);
if (!ndlp)
continue;
spin_lock_irq(&phba->ndlp_lock);
NLP_SET_FREE_REQ(ndlp);
spin_unlock_irq(&phba->ndlp_lock);
/* Trigger the release of the ndlp memory */
lpfc_nlp_put(ndlp);
continue;
}
spin_lock_irq(&phba->ndlp_lock);
if (NLP_CHK_FREE_REQ(ndlp)) {
/* The ndlp should not be in memory free mode already */
spin_unlock_irq(&phba->ndlp_lock);
continue;
} else
/* Indicate request for freeing ndlp memory */
NLP_SET_FREE_REQ(ndlp);
spin_unlock_irq(&phba->ndlp_lock);
if (vport->port_type != LPFC_PHYSICAL_PORT &&
ndlp->nlp_DID == Fabric_DID) {
/* Just free up ndlp with Fabric_DID for vports */
lpfc_nlp_put(ndlp);
continue;
}
if (ndlp->nlp_type & NLP_FABRIC)
lpfc_disc_state_machine(vport, ndlp, NULL,
NLP_EVT_DEVICE_RECOVERY);
lpfc_disc_state_machine(vport, ndlp, NULL,
NLP_EVT_DEVICE_RM);
}
/* At this point, ALL ndlp's should be gone
* because of the previous NLP_EVT_DEVICE_RM.
* Lets wait for this to happen, if needed.
*/
while (!list_empty(&vport->fc_nodes)) {
if (i++ > 3000) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
"0233 Nodelist not empty\n");
list_for_each_entry_safe(ndlp, next_ndlp,
&vport->fc_nodes, nlp_listp) {
lpfc_printf_vlog(ndlp->vport, KERN_ERR,
LOG_NODE,
"0282 did:x%x ndlp:x%p "
"usgmap:x%x refcnt:%d\n",
ndlp->nlp_DID, (void *)ndlp,
ndlp->nlp_usg_map,
atomic_read(
&ndlp->kref.refcount));
}
break;
}
/* Wait for any activity on ndlps to settle */
msleep(10);
}
}
/**
* lpfc_stop_vport_timers - Stop all the timers associated with a vport
* @vport: pointer to a virtual N_Port data structure.
*
* This routine stops all the timers associated with a @vport. This function
* is invoked before disabling or deleting a @vport. Note that the physical
* port is treated as @vport 0.
**/
void
lpfc_stop_vport_timers(struct lpfc_vport *vport)
{
del_timer_sync(&vport->els_tmofunc);
del_timer_sync(&vport->fc_fdmitmo);
lpfc_can_disctmo(vport);
return;
}
/**
* lpfc_stop_hba_timers - Stop all the timers associated with an HBA
* @phba: pointer to lpfc hba data structure.
*
* This routine stops all the timers associated with a HBA. This function is
* invoked before either putting a HBA offline or unloading the driver.
**/
void
lpfc_stop_hba_timers(struct lpfc_hba *phba)
{
lpfc_stop_vport_timers(phba->pport);
del_timer_sync(&phba->sli.mbox_tmo);
del_timer_sync(&phba->fabric_block_timer);
del_timer_sync(&phba->eratt_poll);
del_timer_sync(&phba->hb_tmofunc);
phba->hb_outstanding = 0;
switch (phba->pci_dev_grp) {
case LPFC_PCI_DEV_LP:
/* Stop any LightPulse device specific driver timers */
del_timer_sync(&phba->fcp_poll_timer);
break;
case LPFC_PCI_DEV_OC:
/* Stop any OneConnect device sepcific driver timers */
break;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0297 Invalid device group (x%x)\n",
phba->pci_dev_grp);
break;
}
return;
}
/**
* lpfc_block_mgmt_io - Mark a HBA's management interface as blocked
* @phba: pointer to lpfc hba data structure.
*
* This routine marks a HBA's management interface as blocked. Once the HBA's
* management interface is marked as blocked, all the user space access to
* the HBA, whether they are from sysfs interface or libdfc interface will
* all be blocked. The HBA is set to block the management interface when the
* driver prepares the HBA interface for online or offline.
**/
static void
lpfc_block_mgmt_io(struct lpfc_hba * phba)
{
unsigned long iflag;
spin_lock_irqsave(&phba->hbalock, iflag);
phba->sli.sli_flag |= LPFC_BLOCK_MGMT_IO;
spin_unlock_irqrestore(&phba->hbalock, iflag);
}
/**
* lpfc_online - Initialize and bring a HBA online
* @phba: pointer to lpfc hba data structure.
*
* This routine initializes the HBA and brings a HBA online. During this
* process, the management interface is blocked to prevent user space access
* to the HBA interfering with the driver initialization.
*
* Return codes
* 0 - successful
* 1 - failed
**/
int
lpfc_online(struct lpfc_hba *phba)
{
struct lpfc_vport *vport;
struct lpfc_vport **vports;
int i;
if (!phba)
return 0;
vport = phba->pport;
if (!(vport->fc_flag & FC_OFFLINE_MODE))
return 0;
lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
"0458 Bring Adapter online\n");
lpfc_block_mgmt_io(phba);
if (!lpfc_sli_queue_setup(phba)) {
lpfc_unblock_mgmt_io(phba);
return 1;
}
if (phba->sli_rev == LPFC_SLI_REV4) {
if (lpfc_sli4_hba_setup(phba)) { /* Initialize SLI4 HBA */
lpfc_unblock_mgmt_io(phba);
return 1;
}
} else {
if (lpfc_sli_hba_setup(phba)) { /* Initialize SLI2/SLI3 HBA */
lpfc_unblock_mgmt_io(phba);
return 1;
}
}
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
struct Scsi_Host *shost;
shost = lpfc_shost_from_vport(vports[i]);
spin_lock_irq(shost->host_lock);
vports[i]->fc_flag &= ~FC_OFFLINE_MODE;
if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
vports[i]->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
if (phba->sli_rev == LPFC_SLI_REV4)
vports[i]->fc_flag |= FC_VPORT_NEEDS_INIT_VPI;
spin_unlock_irq(shost->host_lock);
}
lpfc_destroy_vport_work_array(phba, vports);
lpfc_unblock_mgmt_io(phba);
return 0;
}
/**
* lpfc_unblock_mgmt_io - Mark a HBA's management interface to be not blocked
* @phba: pointer to lpfc hba data structure.
*
* This routine marks a HBA's management interface as not blocked. Once the
* HBA's management interface is marked as not blocked, all the user space
* access to the HBA, whether they are from sysfs interface or libdfc
* interface will be allowed. The HBA is set to block the management interface
* when the driver prepares the HBA interface for online or offline and then
* set to unblock the management interface afterwards.
**/
void
lpfc_unblock_mgmt_io(struct lpfc_hba * phba)
{
unsigned long iflag;
spin_lock_irqsave(&phba->hbalock, iflag);
phba->sli.sli_flag &= ~LPFC_BLOCK_MGMT_IO;
spin_unlock_irqrestore(&phba->hbalock, iflag);
}
/**
* lpfc_offline_prep - Prepare a HBA to be brought offline
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to prepare a HBA to be brought offline. It performs
* unregistration login to all the nodes on all vports and flushes the mailbox
* queue to make it ready to be brought offline.
**/
void
lpfc_offline_prep(struct lpfc_hba * phba)
{
struct lpfc_vport *vport = phba->pport;
struct lpfc_nodelist *ndlp, *next_ndlp;
struct lpfc_vport **vports;
int i;
if (vport->fc_flag & FC_OFFLINE_MODE)
return;
lpfc_block_mgmt_io(phba);
lpfc_linkdown(phba);
/* Issue an unreg_login to all nodes on all vports */
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL) {
for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
struct Scsi_Host *shost;
if (vports[i]->load_flag & FC_UNLOADING)
continue;
vports[i]->vpi_state &= ~LPFC_VPI_REGISTERED;
shost = lpfc_shost_from_vport(vports[i]);
list_for_each_entry_safe(ndlp, next_ndlp,
&vports[i]->fc_nodes,
nlp_listp) {
if (!NLP_CHK_NODE_ACT(ndlp))
continue;
if (ndlp->nlp_state == NLP_STE_UNUSED_NODE)
continue;
if (ndlp->nlp_type & NLP_FABRIC) {
lpfc_disc_state_machine(vports[i], ndlp,
NULL, NLP_EVT_DEVICE_RECOVERY);
lpfc_disc_state_machine(vports[i], ndlp,
NULL, NLP_EVT_DEVICE_RM);
}
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag &= ~NLP_NPR_ADISC;
spin_unlock_irq(shost->host_lock);
lpfc_unreg_rpi(vports[i], ndlp);
}
}
}
lpfc_destroy_vport_work_array(phba, vports);
lpfc_sli_mbox_sys_shutdown(phba);
}
/**
* lpfc_offline - Bring a HBA offline
* @phba: pointer to lpfc hba data structure.
*
* This routine actually brings a HBA offline. It stops all the timers
* associated with the HBA, brings down the SLI layer, and eventually
* marks the HBA as in offline state for the upper layer protocol.
**/
void
lpfc_offline(struct lpfc_hba *phba)
{
struct Scsi_Host *shost;
struct lpfc_vport **vports;
int i;
if (phba->pport->fc_flag & FC_OFFLINE_MODE)
return;
/* stop port and all timers associated with this hba */
lpfc_stop_port(phba);
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++)
lpfc_stop_vport_timers(vports[i]);
lpfc_destroy_vport_work_array(phba, vports);
lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
"0460 Bring Adapter offline\n");
/* Bring down the SLI Layer and cleanup. The HBA is offline
now. */
lpfc_sli_hba_down(phba);
spin_lock_irq(&phba->hbalock);
phba->work_ha = 0;
spin_unlock_irq(&phba->hbalock);
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
shost = lpfc_shost_from_vport(vports[i]);
spin_lock_irq(shost->host_lock);
vports[i]->work_port_events = 0;
vports[i]->fc_flag |= FC_OFFLINE_MODE;
spin_unlock_irq(shost->host_lock);
}
lpfc_destroy_vport_work_array(phba, vports);
}
/**
* lpfc_scsi_free - Free all the SCSI buffers and IOCBs from driver lists
* @phba: pointer to lpfc hba data structure.
*
* This routine is to free all the SCSI buffers and IOCBs from the driver
* list back to kernel. It is called from lpfc_pci_remove_one to free
* the internal resources before the device is removed from the system.
*
* Return codes
* 0 - successful (for now, it always returns 0)
**/
static int
lpfc_scsi_free(struct lpfc_hba *phba)
{
struct lpfc_scsi_buf *sb, *sb_next;
struct lpfc_iocbq *io, *io_next;
spin_lock_irq(&phba->hbalock);
/* Release all the lpfc_scsi_bufs maintained by this host. */
spin_lock(&phba->scsi_buf_list_lock);
list_for_each_entry_safe(sb, sb_next, &phba->lpfc_scsi_buf_list, list) {
list_del(&sb->list);
pci_pool_free(phba->lpfc_scsi_dma_buf_pool, sb->data,
sb->dma_handle);
kfree(sb);
phba->total_scsi_bufs--;
}
spin_unlock(&phba->scsi_buf_list_lock);
/* Release all the lpfc_iocbq entries maintained by this host. */
list_for_each_entry_safe(io, io_next, &phba->lpfc_iocb_list, list) {
list_del(&io->list);
kfree(io);
phba->total_iocbq_bufs--;
}
spin_unlock_irq(&phba->hbalock);
return 0;
}
/**
* lpfc_create_port - Create an FC port
* @phba: pointer to lpfc hba data structure.
* @instance: a unique integer ID to this FC port.
* @dev: pointer to the device data structure.
*
* This routine creates a FC port for the upper layer protocol. The FC port
* can be created on top of either a physical port or a virtual port provided
* by the HBA. This routine also allocates a SCSI host data structure (shost)
* and associates the FC port created before adding the shost into the SCSI
* layer.
*
* Return codes
* @vport - pointer to the virtual N_Port data structure.
* NULL - port create failed.
**/
struct lpfc_vport *
lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev)
{
struct lpfc_vport *vport;
struct Scsi_Host *shost;
int error = 0;
if (dev != &phba->pcidev->dev)
shost = scsi_host_alloc(&lpfc_vport_template,
sizeof(struct lpfc_vport));
else
shost = scsi_host_alloc(&lpfc_template,
sizeof(struct lpfc_vport));
if (!shost)
goto out;
vport = (struct lpfc_vport *) shost->hostdata;
vport->phba = phba;
vport->load_flag |= FC_LOADING;
vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
vport->fc_rscn_flush = 0;
lpfc_get_vport_cfgparam(vport);
shost->unique_id = instance;
shost->max_id = LPFC_MAX_TARGET;
shost->max_lun = vport->cfg_max_luns;
shost->this_id = -1;
shost->max_cmd_len = 16;
if (phba->sli_rev == LPFC_SLI_REV4) {
shost->dma_boundary = LPFC_SLI4_MAX_SEGMENT_SIZE;
shost->sg_tablesize = phba->cfg_sg_seg_cnt;
}
/*
* Set initial can_queue value since 0 is no longer supported and
* scsi_add_host will fail. This will be adjusted later based on the
* max xri value determined in hba setup.
*/
shost->can_queue = phba->cfg_hba_queue_depth - 10;
if (dev != &phba->pcidev->dev) {
shost->transportt = lpfc_vport_transport_template;
vport->port_type = LPFC_NPIV_PORT;
} else {
shost->transportt = lpfc_transport_template;
vport->port_type = LPFC_PHYSICAL_PORT;
}
/* Initialize all internally managed lists. */
INIT_LIST_HEAD(&vport->fc_nodes);
INIT_LIST_HEAD(&vport->rcv_buffer_list);
spin_lock_init(&vport->work_port_lock);
init_timer(&vport->fc_disctmo);
vport->fc_disctmo.function = lpfc_disc_timeout;
vport->fc_disctmo.data = (unsigned long)vport;
init_timer(&vport->fc_fdmitmo);
vport->fc_fdmitmo.function = lpfc_fdmi_tmo;
vport->fc_fdmitmo.data = (unsigned long)vport;
init_timer(&vport->els_tmofunc);
vport->els_tmofunc.function = lpfc_els_timeout;
vport->els_tmofunc.data = (unsigned long)vport;
error = scsi_add_host_with_dma(shost, dev, &phba->pcidev->dev);
if (error)
goto out_put_shost;
spin_lock_irq(&phba->hbalock);
list_add_tail(&vport->listentry, &phba->port_list);
spin_unlock_irq(&phba->hbalock);
return vport;
out_put_shost:
scsi_host_put(shost);
out:
return NULL;
}
/**
* destroy_port - destroy an FC port
* @vport: pointer to an lpfc virtual N_Port data structure.
*
* This routine destroys a FC port from the upper layer protocol. All the
* resources associated with the port are released.
**/
void
destroy_port(struct lpfc_vport *vport)
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
struct lpfc_hba *phba = vport->phba;
lpfc_debugfs_terminate(vport);
fc_remove_host(shost);
scsi_remove_host(shost);
spin_lock_irq(&phba->hbalock);
list_del_init(&vport->listentry);
spin_unlock_irq(&phba->hbalock);
lpfc_cleanup(vport);
return;
}
/**
* lpfc_get_instance - Get a unique integer ID
*
* This routine allocates a unique integer ID from lpfc_hba_index pool. It
* uses the kernel idr facility to perform the task.
*
* Return codes:
* instance - a unique integer ID allocated as the new instance.
* -1 - lpfc get instance failed.
**/
int
lpfc_get_instance(void)
{
int instance = 0;
/* Assign an unused number */
if (!idr_pre_get(&lpfc_hba_index, GFP_KERNEL))
return -1;
if (idr_get_new(&lpfc_hba_index, NULL, &instance))
return -1;
return instance;
}
/**
* lpfc_scan_finished - method for SCSI layer to detect whether scan is done
* @shost: pointer to SCSI host data structure.
* @time: elapsed time of the scan in jiffies.
*
* This routine is called by the SCSI layer with a SCSI host to determine
* whether the scan host is finished.
*
* Note: there is no scan_start function as adapter initialization will have
* asynchronously kicked off the link initialization.
*
* Return codes
* 0 - SCSI host scan is not over yet.
* 1 - SCSI host scan is over.
**/
int lpfc_scan_finished(struct Scsi_Host *shost, unsigned long time)
{
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
int stat = 0;
spin_lock_irq(shost->host_lock);
if (vport->load_flag & FC_UNLOADING) {
stat = 1;
goto finished;
}
if (time >= 30 * HZ) {
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0461 Scanning longer than 30 "
"seconds. Continuing initialization\n");
stat = 1;
goto finished;
}
if (time >= 15 * HZ && phba->link_state <= LPFC_LINK_DOWN) {
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0465 Link down longer than 15 "
"seconds. Continuing initialization\n");
stat = 1;
goto finished;
}
if (vport->port_state != LPFC_VPORT_READY)
goto finished;
if (vport->num_disc_nodes || vport->fc_prli_sent)
goto finished;
if (vport->fc_map_cnt == 0 && time < 2 * HZ)
goto finished;
if ((phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) != 0)
goto finished;
stat = 1;
finished:
spin_unlock_irq(shost->host_lock);
return stat;
}
/**
* lpfc_host_attrib_init - Initialize SCSI host attributes on a FC port
* @shost: pointer to SCSI host data structure.
*
* This routine initializes a given SCSI host attributes on a FC port. The
* SCSI host can be either on top of a physical port or a virtual port.
**/
void lpfc_host_attrib_init(struct Scsi_Host *shost)
{
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
/*
* Set fixed host attributes. Must done after lpfc_sli_hba_setup().
*/
fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn);
fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn);
fc_host_supported_classes(shost) = FC_COS_CLASS3;
memset(fc_host_supported_fc4s(shost), 0,
sizeof(fc_host_supported_fc4s(shost)));
fc_host_supported_fc4s(shost)[2] = 1;
fc_host_supported_fc4s(shost)[7] = 1;
lpfc_vport_symbolic_node_name(vport, fc_host_symbolic_name(shost),
sizeof fc_host_symbolic_name(shost));
fc_host_supported_speeds(shost) = 0;
if (phba->lmt & LMT_10Gb)
fc_host_supported_speeds(shost) |= FC_PORTSPEED_10GBIT;
if (phba->lmt & LMT_8Gb)
fc_host_supported_speeds(shost) |= FC_PORTSPEED_8GBIT;
if (phba->lmt & LMT_4Gb)
fc_host_supported_speeds(shost) |= FC_PORTSPEED_4GBIT;
if (phba->lmt & LMT_2Gb)
fc_host_supported_speeds(shost) |= FC_PORTSPEED_2GBIT;
if (phba->lmt & LMT_1Gb)
fc_host_supported_speeds(shost) |= FC_PORTSPEED_1GBIT;
fc_host_maxframe_size(shost) =
(((uint32_t) vport->fc_sparam.cmn.bbRcvSizeMsb & 0x0F) << 8) |
(uint32_t) vport->fc_sparam.cmn.bbRcvSizeLsb;
/* This value is also unchanging */
memset(fc_host_active_fc4s(shost), 0,
sizeof(fc_host_active_fc4s(shost)));
fc_host_active_fc4s(shost)[2] = 1;
fc_host_active_fc4s(shost)[7] = 1;
fc_host_max_npiv_vports(shost) = phba->max_vpi;
spin_lock_irq(shost->host_lock);
vport->load_flag &= ~FC_LOADING;
spin_unlock_irq(shost->host_lock);
}
/**
* lpfc_stop_port_s3 - Stop SLI3 device port
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to stop an SLI3 device port, it stops the device
* from generating interrupts and stops the device driver's timers for the
* device.
**/
static void
lpfc_stop_port_s3(struct lpfc_hba *phba)
{
/* Clear all interrupt enable conditions */
writel(0, phba->HCregaddr);
readl(phba->HCregaddr); /* flush */
/* Clear all pending interrupts */
writel(0xffffffff, phba->HAregaddr);
readl(phba->HAregaddr); /* flush */
/* Reset some HBA SLI setup states */
lpfc_stop_hba_timers(phba);
phba->pport->work_port_events = 0;
}
/**
* lpfc_stop_port_s4 - Stop SLI4 device port
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to stop an SLI4 device port, it stops the device
* from generating interrupts and stops the device driver's timers for the
* device.
**/
static void
lpfc_stop_port_s4(struct lpfc_hba *phba)
{
/* Reset some HBA SLI4 setup states */
lpfc_stop_hba_timers(phba);
phba->pport->work_port_events = 0;
phba->sli4_hba.intr_enable = 0;
/* Hard clear it for now, shall have more graceful way to wait later */
phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
}
/**
* lpfc_stop_port - Wrapper function for stopping hba port
* @phba: Pointer to HBA context object.
*
* This routine wraps the actual SLI3 or SLI4 hba stop port routine from
* the API jump table function pointer from the lpfc_hba struct.
**/
void
lpfc_stop_port(struct lpfc_hba *phba)
{
phba->lpfc_stop_port(phba);
}
/**
* lpfc_sli4_remove_dflt_fcf - Remove the driver default fcf record from the port.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to remove the driver default fcf record from
* the port. This routine currently acts on FCF Index 0.
*
**/
void
lpfc_sli_remove_dflt_fcf(struct lpfc_hba *phba)
{
int rc = 0;
LPFC_MBOXQ_t *mboxq;
struct lpfc_mbx_del_fcf_tbl_entry *del_fcf_record;
uint32_t mbox_tmo, req_len;
uint32_t shdr_status, shdr_add_status;
mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mboxq) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2020 Failed to allocate mbox for ADD_FCF cmd\n");
return;
}
req_len = sizeof(struct lpfc_mbx_del_fcf_tbl_entry) -
sizeof(struct lpfc_sli4_cfg_mhdr);
rc = lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_FCOE,
LPFC_MBOX_OPCODE_FCOE_DELETE_FCF,
req_len, LPFC_SLI4_MBX_EMBED);
/*
* In phase 1, there is a single FCF index, 0. In phase2, the driver
* supports multiple FCF indices.
*/
del_fcf_record = &mboxq->u.mqe.un.del_fcf_entry;
bf_set(lpfc_mbx_del_fcf_tbl_count, del_fcf_record, 1);
bf_set(lpfc_mbx_del_fcf_tbl_index, del_fcf_record,
phba->fcf.fcf_indx);
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
else {
mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
}
/* The IOCTL status is embedded in the mailbox subheader. */
shdr_status = bf_get(lpfc_mbox_hdr_status,
&del_fcf_record->header.cfg_shdr.response);
shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
&del_fcf_record->header.cfg_shdr.response);
if (shdr_status || shdr_add_status || rc != MBX_SUCCESS) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"2516 DEL FCF of default FCF Index failed "
"mbx status x%x, status x%x add_status x%x\n",
rc, shdr_status, shdr_add_status);
}
if (rc != MBX_TIMEOUT)
mempool_free(mboxq, phba->mbox_mem_pool);
}
/**
* lpfc_sli4_fw_cfg_check - Read the firmware config and verify FCoE support
* @phba: pointer to lpfc hba data structure.
*
* This function uses the QUERY_FW_CFG mailbox command to determine if the
* firmware loaded supports FCoE. A return of zero indicates that the mailbox
* was successful and the firmware supports FCoE. Any other return indicates
* a error. It is assumed that this function will be called before interrupts
* are enabled.
**/
static int
lpfc_sli4_fw_cfg_check(struct lpfc_hba *phba)
{
int rc = 0;
LPFC_MBOXQ_t *mboxq;
struct lpfc_mbx_query_fw_cfg *query_fw_cfg;
uint32_t length;
uint32_t shdr_status, shdr_add_status;
mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mboxq) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2621 Failed to allocate mbox for "
"query firmware config cmd\n");
return -ENOMEM;
}
query_fw_cfg = &mboxq->u.mqe.un.query_fw_cfg;
length = (sizeof(struct lpfc_mbx_query_fw_cfg) -
sizeof(struct lpfc_sli4_cfg_mhdr));
lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
LPFC_MBOX_OPCODE_QUERY_FW_CFG,
length, LPFC_SLI4_MBX_EMBED);
rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
/* The IOCTL status is embedded in the mailbox subheader. */
shdr_status = bf_get(lpfc_mbox_hdr_status,
&query_fw_cfg->header.cfg_shdr.response);
shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
&query_fw_cfg->header.cfg_shdr.response);
if (shdr_status || shdr_add_status || rc != MBX_SUCCESS) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"2622 Query Firmware Config failed "
"mbx status x%x, status x%x add_status x%x\n",
rc, shdr_status, shdr_add_status);
return -EINVAL;
}
if (!bf_get(lpfc_function_mode_fcoe_i, query_fw_cfg)) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"2623 FCoE Function not supported by firmware. "
"Function mode = %08x\n",
query_fw_cfg->function_mode);
return -EINVAL;
}
if (rc != MBX_TIMEOUT)
mempool_free(mboxq, phba->mbox_mem_pool);
return 0;
}
/**
* lpfc_sli4_parse_latt_fault - Parse sli4 link-attention link fault code
* @phba: pointer to lpfc hba data structure.
* @acqe_link: pointer to the async link completion queue entry.
*
* This routine is to parse the SLI4 link-attention link fault code and
* translate it into the base driver's read link attention mailbox command
* status.
*
* Return: Link-attention status in terms of base driver's coding.
**/
static uint16_t
lpfc_sli4_parse_latt_fault(struct lpfc_hba *phba,
struct lpfc_acqe_link *acqe_link)
{
uint16_t latt_fault;
switch (bf_get(lpfc_acqe_link_fault, acqe_link)) {
case LPFC_ASYNC_LINK_FAULT_NONE:
case LPFC_ASYNC_LINK_FAULT_LOCAL:
case LPFC_ASYNC_LINK_FAULT_REMOTE:
latt_fault = 0;
break;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0398 Invalid link fault code: x%x\n",
bf_get(lpfc_acqe_link_fault, acqe_link));
latt_fault = MBXERR_ERROR;
break;
}
return latt_fault;
}
/**
* lpfc_sli4_parse_latt_type - Parse sli4 link attention type
* @phba: pointer to lpfc hba data structure.
* @acqe_link: pointer to the async link completion queue entry.
*
* This routine is to parse the SLI4 link attention type and translate it
* into the base driver's link attention type coding.
*
* Return: Link attention type in terms of base driver's coding.
**/
static uint8_t
lpfc_sli4_parse_latt_type(struct lpfc_hba *phba,
struct lpfc_acqe_link *acqe_link)
{
uint8_t att_type;
switch (bf_get(lpfc_acqe_link_status, acqe_link)) {
case LPFC_ASYNC_LINK_STATUS_DOWN:
case LPFC_ASYNC_LINK_STATUS_LOGICAL_DOWN:
att_type = AT_LINK_DOWN;
break;
case LPFC_ASYNC_LINK_STATUS_UP:
/* Ignore physical link up events - wait for logical link up */
att_type = AT_RESERVED;
break;
case LPFC_ASYNC_LINK_STATUS_LOGICAL_UP:
att_type = AT_LINK_UP;
break;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0399 Invalid link attention type: x%x\n",
bf_get(lpfc_acqe_link_status, acqe_link));
att_type = AT_RESERVED;
break;
}
return att_type;
}
/**
* lpfc_sli4_parse_latt_link_speed - Parse sli4 link-attention link speed
* @phba: pointer to lpfc hba data structure.
* @acqe_link: pointer to the async link completion queue entry.
*
* This routine is to parse the SLI4 link-attention link speed and translate
* it into the base driver's link-attention link speed coding.
*
* Return: Link-attention link speed in terms of base driver's coding.
**/
static uint8_t
lpfc_sli4_parse_latt_link_speed(struct lpfc_hba *phba,
struct lpfc_acqe_link *acqe_link)
{
uint8_t link_speed;
switch (bf_get(lpfc_acqe_link_speed, acqe_link)) {
case LPFC_ASYNC_LINK_SPEED_ZERO:
link_speed = LA_UNKNW_LINK;
break;
case LPFC_ASYNC_LINK_SPEED_10MBPS:
link_speed = LA_UNKNW_LINK;
break;
case LPFC_ASYNC_LINK_SPEED_100MBPS:
link_speed = LA_UNKNW_LINK;
break;
case LPFC_ASYNC_LINK_SPEED_1GBPS:
link_speed = LA_1GHZ_LINK;
break;
case LPFC_ASYNC_LINK_SPEED_10GBPS:
link_speed = LA_10GHZ_LINK;
break;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0483 Invalid link-attention link speed: x%x\n",
bf_get(lpfc_acqe_link_speed, acqe_link));
link_speed = LA_UNKNW_LINK;
break;
}
return link_speed;
}
/**
* lpfc_sli4_async_link_evt - Process the asynchronous link event
* @phba: pointer to lpfc hba data structure.
* @acqe_link: pointer to the async link completion queue entry.
*
* This routine is to handle the SLI4 asynchronous link event.
**/
static void
lpfc_sli4_async_link_evt(struct lpfc_hba *phba,
struct lpfc_acqe_link *acqe_link)
{
struct lpfc_dmabuf *mp;
LPFC_MBOXQ_t *pmb;
MAILBOX_t *mb;
READ_LA_VAR *la;
uint8_t att_type;
att_type = lpfc_sli4_parse_latt_type(phba, acqe_link);
if (att_type != AT_LINK_DOWN && att_type != AT_LINK_UP)
return;
phba->fcoe_eventtag = acqe_link->event_tag;
pmb = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!pmb) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"0395 The mboxq allocation failed\n");
return;
}
mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
if (!mp) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"0396 The lpfc_dmabuf allocation failed\n");
goto out_free_pmb;
}
mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys);
if (!mp->virt) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"0397 The mbuf allocation failed\n");
goto out_free_dmabuf;
}
/* Cleanup any outstanding ELS commands */
lpfc_els_flush_all_cmd(phba);
/* Block ELS IOCBs until we have done process link event */
phba->sli.ring[LPFC_ELS_RING].flag |= LPFC_STOP_IOCB_EVENT;
/* Update link event statistics */
phba->sli.slistat.link_event++;
/* Create pseudo lpfc_handle_latt mailbox command from link ACQE */
lpfc_read_la(phba, pmb, mp);
pmb->vport = phba->pport;
/* Parse and translate status field */
mb = &pmb->u.mb;
mb->mbxStatus = lpfc_sli4_parse_latt_fault(phba, acqe_link);
/* Parse and translate link attention fields */
la = (READ_LA_VAR *) &pmb->u.mb.un.varReadLA;
la->eventTag = acqe_link->event_tag;
la->attType = att_type;
la->UlnkSpeed = lpfc_sli4_parse_latt_link_speed(phba, acqe_link);
/* Fake the the following irrelvant fields */
la->topology = TOPOLOGY_PT_PT;
la->granted_AL_PA = 0;
la->il = 0;
la->pb = 0;
la->fa = 0;
la->mm = 0;
/* Keep the link status for extra SLI4 state machine reference */
phba->sli4_hba.link_state.speed =
bf_get(lpfc_acqe_link_speed, acqe_link);
phba->sli4_hba.link_state.duplex =
bf_get(lpfc_acqe_link_duplex, acqe_link);
phba->sli4_hba.link_state.status =
bf_get(lpfc_acqe_link_status, acqe_link);
phba->sli4_hba.link_state.physical =
bf_get(lpfc_acqe_link_physical, acqe_link);
phba->sli4_hba.link_state.fault =
bf_get(lpfc_acqe_link_fault, acqe_link);
/* Invoke the lpfc_handle_latt mailbox command callback function */
lpfc_mbx_cmpl_read_la(phba, pmb);
return;
out_free_dmabuf:
kfree(mp);
out_free_pmb:
mempool_free(pmb, phba->mbox_mem_pool);
}
/**
* lpfc_sli4_async_fcoe_evt - Process the asynchronous fcoe event
* @phba: pointer to lpfc hba data structure.
* @acqe_link: pointer to the async fcoe completion queue entry.
*
* This routine is to handle the SLI4 asynchronous fcoe event.
**/
static void
lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
struct lpfc_acqe_fcoe *acqe_fcoe)
{
uint8_t event_type = bf_get(lpfc_acqe_fcoe_event_type, acqe_fcoe);
int rc;
struct lpfc_vport *vport;
struct lpfc_nodelist *ndlp;
struct Scsi_Host *shost;
phba->fc_eventTag = acqe_fcoe->event_tag;
phba->fcoe_eventtag = acqe_fcoe->event_tag;
switch (event_type) {
case LPFC_FCOE_EVENT_TYPE_NEW_FCF:
lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
"2546 New FCF found index 0x%x tag 0x%x\n",
acqe_fcoe->index,
acqe_fcoe->event_tag);
/*
* If the current FCF is in discovered state, or
* FCF discovery is in progress do nothing.
*/
spin_lock_irq(&phba->hbalock);
if ((phba->fcf.fcf_flag & FCF_DISCOVERED) ||
(phba->hba_flag & FCF_DISC_INPROGRESS)) {
spin_unlock_irq(&phba->hbalock);
break;
}
spin_unlock_irq(&phba->hbalock);
/* Read the FCF table and re-discover SAN. */
rc = lpfc_sli4_read_fcf_record(phba, LPFC_FCOE_FCF_GET_FIRST);
if (rc)
lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
"2547 Read FCF record failed 0x%x\n",
rc);
break;
case LPFC_FCOE_EVENT_TYPE_FCF_TABLE_FULL:
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"2548 FCF Table full count 0x%x tag 0x%x\n",
bf_get(lpfc_acqe_fcoe_fcf_count, acqe_fcoe),
acqe_fcoe->event_tag);
break;
case LPFC_FCOE_EVENT_TYPE_FCF_DEAD:
lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
"2549 FCF disconnected from network index 0x%x"
" tag 0x%x\n", acqe_fcoe->index,
acqe_fcoe->event_tag);
/* If the event is not for currently used fcf do nothing */
if (phba->fcf.fcf_indx != acqe_fcoe->index)
break;
/*
* Currently, driver support only one FCF - so treat this as
* a link down.
*/
lpfc_linkdown(phba);
/* Unregister FCF if no devices connected to it */
lpfc_unregister_unused_fcf(phba);
break;
case LPFC_FCOE_EVENT_TYPE_CVL:
lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
"2718 Clear Virtual Link Received for VPI 0x%x"
" tag 0x%x\n", acqe_fcoe->index, acqe_fcoe->event_tag);
vport = lpfc_find_vport_by_vpid(phba,
acqe_fcoe->index - phba->vpi_base);
if (!vport)
break;
ndlp = lpfc_findnode_did(vport, Fabric_DID);
if (!ndlp)
break;
shost = lpfc_shost_from_vport(vport);
lpfc_linkdown_port(vport);
if (vport->port_type != LPFC_NPIV_PORT) {
mod_timer(&ndlp->nlp_delayfunc, jiffies + HZ);
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= NLP_DELAY_TMO;
spin_unlock_irq(shost->host_lock);
ndlp->nlp_last_elscmd = ELS_CMD_FLOGI;
vport->port_state = LPFC_FLOGI;
}
break;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"0288 Unknown FCoE event type 0x%x event tag "
"0x%x\n", event_type, acqe_fcoe->event_tag);
break;
}
}
/**
* lpfc_sli4_async_dcbx_evt - Process the asynchronous dcbx event
* @phba: pointer to lpfc hba data structure.
* @acqe_link: pointer to the async dcbx completion queue entry.
*
* This routine is to handle the SLI4 asynchronous dcbx event.
**/
static void
lpfc_sli4_async_dcbx_evt(struct lpfc_hba *phba,
struct lpfc_acqe_dcbx *acqe_dcbx)
{
phba->fc_eventTag = acqe_dcbx->event_tag;
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"0290 The SLI4 DCBX asynchronous event is not "
"handled yet\n");
}
/**
* lpfc_sli4_async_event_proc - Process all the pending asynchronous event
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked by the worker thread to process all the pending
* SLI4 asynchronous events.
**/
void lpfc_sli4_async_event_proc(struct lpfc_hba *phba)
{
struct lpfc_cq_event *cq_event;
/* First, declare the async event has been handled */
spin_lock_irq(&phba->hbalock);
phba->hba_flag &= ~ASYNC_EVENT;
spin_unlock_irq(&phba->hbalock);
/* Now, handle all the async events */
while (!list_empty(&phba->sli4_hba.sp_asynce_work_queue)) {
/* Get the first event from the head of the event queue */
spin_lock_irq(&phba->hbalock);
list_remove_head(&phba->sli4_hba.sp_asynce_work_queue,
cq_event, struct lpfc_cq_event, list);
spin_unlock_irq(&phba->hbalock);
/* Process the asynchronous event */
switch (bf_get(lpfc_trailer_code, &cq_event->cqe.mcqe_cmpl)) {
case LPFC_TRAILER_CODE_LINK:
lpfc_sli4_async_link_evt(phba,
&cq_event->cqe.acqe_link);
break;
case LPFC_TRAILER_CODE_FCOE:
lpfc_sli4_async_fcoe_evt(phba,
&cq_event->cqe.acqe_fcoe);
break;
case LPFC_TRAILER_CODE_DCBX:
lpfc_sli4_async_dcbx_evt(phba,
&cq_event->cqe.acqe_dcbx);
break;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"1804 Invalid asynchrous event code: "
"x%x\n", bf_get(lpfc_trailer_code,
&cq_event->cqe.mcqe_cmpl));
break;
}
/* Free the completion event processed to the free pool */
lpfc_sli4_cq_event_release(phba, cq_event);
}
}
/**
* lpfc_api_table_setup - Set up per hba pci-device group func api jump table
* @phba: pointer to lpfc hba data structure.
* @dev_grp: The HBA PCI-Device group number.
*
* This routine is invoked to set up the per HBA PCI-Device group function
* API jump table entries.
*
* Return: 0 if success, otherwise -ENODEV
**/
int
lpfc_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
{
int rc;
/* Set up lpfc PCI-device group */
phba->pci_dev_grp = dev_grp;
/* The LPFC_PCI_DEV_OC uses SLI4 */
if (dev_grp == LPFC_PCI_DEV_OC)
phba->sli_rev = LPFC_SLI_REV4;
/* Set up device INIT API function jump table */
rc = lpfc_init_api_table_setup(phba, dev_grp);
if (rc)
return -ENODEV;
/* Set up SCSI API function jump table */
rc = lpfc_scsi_api_table_setup(phba, dev_grp);
if (rc)
return -ENODEV;
/* Set up SLI API function jump table */
rc = lpfc_sli_api_table_setup(phba, dev_grp);
if (rc)
return -ENODEV;
/* Set up MBOX API function jump table */
rc = lpfc_mbox_api_table_setup(phba, dev_grp);
if (rc)
return -ENODEV;
return 0;
}
/**
* lpfc_log_intr_mode - Log the active interrupt mode
* @phba: pointer to lpfc hba data structure.
* @intr_mode: active interrupt mode adopted.
*
* This routine it invoked to log the currently used active interrupt mode
* to the device.
**/
static void lpfc_log_intr_mode(struct lpfc_hba *phba, uint32_t intr_mode)
{
switch (intr_mode) {
case 0:
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0470 Enable INTx interrupt mode.\n");
break;
case 1:
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0481 Enabled MSI interrupt mode.\n");
break;
case 2:
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0480 Enabled MSI-X interrupt mode.\n");
break;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0482 Illegal interrupt mode.\n");
break;
}
return;
}
/**
* lpfc_enable_pci_dev - Enable a generic PCI device.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to enable the PCI device that is common to all
* PCI devices.
*
* Return codes
* 0 - sucessful
* other values - error
**/
static int
lpfc_enable_pci_dev(struct lpfc_hba *phba)
{
struct pci_dev *pdev;
int bars;
/* Obtain PCI device reference */
if (!phba->pcidev)
goto out_error;
else
pdev = phba->pcidev;
/* Select PCI BARs */
bars = pci_select_bars(pdev, IORESOURCE_MEM);
/* Enable PCI device */
if (pci_enable_device_mem(pdev))
goto out_error;
/* Request PCI resource for the device */
if (pci_request_selected_regions(pdev, bars, LPFC_DRIVER_NAME))
goto out_disable_device;
/* Set up device as PCI master and save state for EEH */
pci_set_master(pdev);
pci_try_set_mwi(pdev);
pci_save_state(pdev);
return 0;
out_disable_device:
pci_disable_device(pdev);
out_error:
return -ENODEV;
}
/**
* lpfc_disable_pci_dev - Disable a generic PCI device.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to disable the PCI device that is common to all
* PCI devices.
**/
static void
lpfc_disable_pci_dev(struct lpfc_hba *phba)
{
struct pci_dev *pdev;
int bars;
/* Obtain PCI device reference */
if (!phba->pcidev)
return;
else
pdev = phba->pcidev;
/* Select PCI BARs */
bars = pci_select_bars(pdev, IORESOURCE_MEM);
/* Release PCI resource and disable PCI device */
pci_release_selected_regions(pdev, bars);
pci_disable_device(pdev);
/* Null out PCI private reference to driver */
pci_set_drvdata(pdev, NULL);
return;
}
/**
* lpfc_reset_hba - Reset a hba
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to reset a hba device. It brings the HBA
* offline, performs a board restart, and then brings the board back
* online. The lpfc_offline calls lpfc_sli_hba_down which will clean up
* on outstanding mailbox commands.
**/
void
lpfc_reset_hba(struct lpfc_hba *phba)
{
/* If resets are disabled then set error state and return. */
if (!phba->cfg_enable_hba_reset) {
phba->link_state = LPFC_HBA_ERROR;
return;
}
lpfc_offline_prep(phba);
lpfc_offline(phba);
lpfc_sli_brdrestart(phba);
lpfc_online(phba);
lpfc_unblock_mgmt_io(phba);
}
/**
* lpfc_sli_driver_resource_setup - Setup driver internal resources for SLI3 dev.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to set up the driver internal resources specific to
* support the SLI-3 HBA device it attached to.
*
* Return codes
* 0 - sucessful
* other values - error
**/
static int
lpfc_sli_driver_resource_setup(struct lpfc_hba *phba)
{
struct lpfc_sli *psli;
/*
* Initialize timers used by driver
*/
/* Heartbeat timer */
init_timer(&phba->hb_tmofunc);
phba->hb_tmofunc.function = lpfc_hb_timeout;
phba->hb_tmofunc.data = (unsigned long)phba;
psli = &phba->sli;
/* MBOX heartbeat timer */
init_timer(&psli->mbox_tmo);
psli->mbox_tmo.function = lpfc_mbox_timeout;
psli->mbox_tmo.data = (unsigned long) phba;
/* FCP polling mode timer */
init_timer(&phba->fcp_poll_timer);
phba->fcp_poll_timer.function = lpfc_poll_timeout;
phba->fcp_poll_timer.data = (unsigned long) phba;
/* Fabric block timer */
init_timer(&phba->fabric_block_timer);
phba->fabric_block_timer.function = lpfc_fabric_block_timeout;
phba->fabric_block_timer.data = (unsigned long) phba;
/* EA polling mode timer */
init_timer(&phba->eratt_poll);
phba->eratt_poll.function = lpfc_poll_eratt;
phba->eratt_poll.data = (unsigned long) phba;
/* Host attention work mask setup */
phba->work_ha_mask = (HA_ERATT | HA_MBATT | HA_LATT);
phba->work_ha_mask |= (HA_RXMASK << (LPFC_ELS_RING * 4));
/* Get all the module params for configuring this host */
lpfc_get_cfgparam(phba);
/*
* Since the sg_tablesize is module parameter, the sg_dma_buf_size
* used to create the sg_dma_buf_pool must be dynamically calculated.
* 2 segments are added since the IOCB needs a command and response bde.
*/
phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
sizeof(struct fcp_rsp) +
((phba->cfg_sg_seg_cnt + 2) * sizeof(struct ulp_bde64));
if (phba->cfg_enable_bg) {
phba->cfg_sg_seg_cnt = LPFC_MAX_SG_SEG_CNT;
phba->cfg_sg_dma_buf_size +=
phba->cfg_prot_sg_seg_cnt * sizeof(struct ulp_bde64);
}
/* Also reinitialize the host templates with new values. */
lpfc_vport_template.sg_tablesize = phba->cfg_sg_seg_cnt;
lpfc_template.sg_tablesize = phba->cfg_sg_seg_cnt;
phba->max_vpi = LPFC_MAX_VPI;
/* This will be set to correct value after config_port mbox */
phba->max_vports = 0;
/*
* Initialize the SLI Layer to run with lpfc HBAs.
*/
lpfc_sli_setup(phba);
lpfc_sli_queue_setup(phba);
/* Allocate device driver memory */
if (lpfc_mem_alloc(phba, BPL_ALIGN_SZ))
return -ENOMEM;
return 0;
}
/**
* lpfc_sli_driver_resource_unset - Unset drvr internal resources for SLI3 dev
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to unset the driver internal resources set up
* specific for supporting the SLI-3 HBA device it attached to.
**/
static void
lpfc_sli_driver_resource_unset(struct lpfc_hba *phba)
{
/* Free device driver memory allocated */
lpfc_mem_free_all(phba);
return;
}
/**
* lpfc_sli4_driver_resource_setup - Setup drvr internal resources for SLI4 dev
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to set up the driver internal resources specific to
* support the SLI-4 HBA device it attached to.
*
* Return codes
* 0 - sucessful
* other values - error
**/
static int
lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
{
struct lpfc_sli *psli;
int rc;
int i, hbq_count;
/* Before proceed, wait for POST done and device ready */
rc = lpfc_sli4_post_status_check(phba);
if (rc)
return -ENODEV;
/*
* Initialize timers used by driver
*/
/* Heartbeat timer */
init_timer(&phba->hb_tmofunc);
phba->hb_tmofunc.function = lpfc_hb_timeout;
phba->hb_tmofunc.data = (unsigned long)phba;
psli = &phba->sli;
/* MBOX heartbeat timer */
init_timer(&psli->mbox_tmo);
psli->mbox_tmo.function = lpfc_mbox_timeout;
psli->mbox_tmo.data = (unsigned long) phba;
/* Fabric block timer */
init_timer(&phba->fabric_block_timer);
phba->fabric_block_timer.function = lpfc_fabric_block_timeout;
phba->fabric_block_timer.data = (unsigned long) phba;
/* EA polling mode timer */
init_timer(&phba->eratt_poll);
phba->eratt_poll.function = lpfc_poll_eratt;
phba->eratt_poll.data = (unsigned long) phba;
/*
* We need to do a READ_CONFIG mailbox command here before
* calling lpfc_get_cfgparam. For VFs this will report the
* MAX_XRI, MAX_VPI, MAX_RPI, MAX_IOCB, and MAX_VFI settings.
* All of the resources allocated
* for this Port are tied to these values.
*/
/* Get all the module params for configuring this host */
lpfc_get_cfgparam(phba);
phba->max_vpi = LPFC_MAX_VPI;
/* This will be set to correct value after the read_config mbox */
phba->max_vports = 0;
/* Program the default value of vlan_id and fc_map */
phba->valid_vlan = 0;
phba->fc_map[0] = LPFC_FCOE_FCF_MAP0;
phba->fc_map[1] = LPFC_FCOE_FCF_MAP1;
phba->fc_map[2] = LPFC_FCOE_FCF_MAP2;
/*
* Since the sg_tablesize is module parameter, the sg_dma_buf_size
* used to create the sg_dma_buf_pool must be dynamically calculated.
* 2 segments are added since the IOCB needs a command and response bde.
* To insure that the scsi sgl does not cross a 4k page boundary only
* sgl sizes of 1k, 2k, 4k, and 8k are supported.
* Table of sgl sizes and seg_cnt:
* sgl size, sg_seg_cnt total seg
* 1k 50 52
* 2k 114 116
* 4k 242 244
* 8k 498 500
* cmd(32) + rsp(160) + (52 * sizeof(sli4_sge)) = 1024
* cmd(32) + rsp(160) + (116 * sizeof(sli4_sge)) = 2048
* cmd(32) + rsp(160) + (244 * sizeof(sli4_sge)) = 4096
* cmd(32) + rsp(160) + (500 * sizeof(sli4_sge)) = 8192
*/
if (phba->cfg_sg_seg_cnt <= LPFC_DEFAULT_SG_SEG_CNT)
phba->cfg_sg_seg_cnt = 50;
else if (phba->cfg_sg_seg_cnt <= 114)
phba->cfg_sg_seg_cnt = 114;
else if (phba->cfg_sg_seg_cnt <= 242)
phba->cfg_sg_seg_cnt = 242;
else
phba->cfg_sg_seg_cnt = 498;
phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd)
+ sizeof(struct fcp_rsp);
phba->cfg_sg_dma_buf_size +=
((phba->cfg_sg_seg_cnt + 2) * sizeof(struct sli4_sge));
/* Initialize buffer queue management fields */
hbq_count = lpfc_sli_hbq_count();
for (i = 0; i < hbq_count; ++i)
INIT_LIST_HEAD(&phba->hbqs[i].hbq_buffer_list);
INIT_LIST_HEAD(&phba->rb_pend_list);
phba->hbqs[LPFC_ELS_HBQ].hbq_alloc_buffer = lpfc_sli4_rb_alloc;
phba->hbqs[LPFC_ELS_HBQ].hbq_free_buffer = lpfc_sli4_rb_free;
/*
* Initialize the SLI Layer to run with lpfc SLI4 HBAs.
*/
/* Initialize the Abort scsi buffer list used by driver */
spin_lock_init(&phba->sli4_hba.abts_scsi_buf_list_lock);
INIT_LIST_HEAD(&phba->sli4_hba.lpfc_abts_scsi_buf_list);
/* This abort list used by worker thread */
spin_lock_init(&phba->sli4_hba.abts_sgl_list_lock);
/*
* Initialize dirver internal slow-path work queues
*/
/* Driver internel slow-path CQ Event pool */
INIT_LIST_HEAD(&phba->sli4_hba.sp_cqe_event_pool);
/* Response IOCB work queue list */
INIT_LIST_HEAD(&phba->sli4_hba.sp_queue_event);
/* Asynchronous event CQ Event work queue list */
INIT_LIST_HEAD(&phba->sli4_hba.sp_asynce_work_queue);
/* Fast-path XRI aborted CQ Event work queue list */
INIT_LIST_HEAD(&phba->sli4_hba.sp_fcp_xri_aborted_work_queue);
/* Slow-path XRI aborted CQ Event work queue list */
INIT_LIST_HEAD(&phba->sli4_hba.sp_els_xri_aborted_work_queue);
/* Receive queue CQ Event work queue list */
INIT_LIST_HEAD(&phba->sli4_hba.sp_unsol_work_queue);
/* Initialize the driver internal SLI layer lists. */
lpfc_sli_setup(phba);
lpfc_sli_queue_setup(phba);
/* Allocate device driver memory */
rc = lpfc_mem_alloc(phba, SGL_ALIGN_SZ);
if (rc)
return -ENOMEM;
/* Create the bootstrap mailbox command */
rc = lpfc_create_bootstrap_mbox(phba);
if (unlikely(rc))
goto out_free_mem;
/* Set up the host's endian order with the device. */
rc = lpfc_setup_endian_order(phba);
if (unlikely(rc))
goto out_free_bsmbx;
rc = lpfc_sli4_fw_cfg_check(phba);
if (unlikely(rc))
goto out_free_bsmbx;
/* Set up the hba's configuration parameters. */
rc = lpfc_sli4_read_config(phba);
if (unlikely(rc))
goto out_free_bsmbx;
/* Perform a function reset */
rc = lpfc_pci_function_reset(phba);
if (unlikely(rc))
goto out_free_bsmbx;
/* Create all the SLI4 queues */
rc = lpfc_sli4_queue_create(phba);
if (rc)
goto out_free_bsmbx;
/* Create driver internal CQE event pool */
rc = lpfc_sli4_cq_event_pool_create(phba);
if (rc)
goto out_destroy_queue;
/* Initialize and populate the iocb list per host */
rc = lpfc_init_sgl_list(phba);
if (rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1400 Failed to initialize sgl list.\n");
goto out_destroy_cq_event_pool;
}
rc = lpfc_init_active_sgl_array(phba);
if (rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1430 Failed to initialize sgl list.\n");
goto out_free_sgl_list;
}
rc = lpfc_sli4_init_rpi_hdrs(phba);
if (rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1432 Failed to initialize rpi headers.\n");
goto out_free_active_sgl;
}
phba->sli4_hba.fcp_eq_hdl = kzalloc((sizeof(struct lpfc_fcp_eq_hdl) *
phba->cfg_fcp_eq_count), GFP_KERNEL);
if (!phba->sli4_hba.fcp_eq_hdl) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2572 Failed allocate memory for fast-path "
"per-EQ handle array\n");
goto out_remove_rpi_hdrs;
}
phba->sli4_hba.msix_entries = kzalloc((sizeof(struct msix_entry) *
phba->sli4_hba.cfg_eqn), GFP_KERNEL);
if (!phba->sli4_hba.msix_entries) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2573 Failed allocate memory for msi-x "
"interrupt vector entries\n");
goto out_free_fcp_eq_hdl;
}
return rc;
out_free_fcp_eq_hdl:
kfree(phba->sli4_hba.fcp_eq_hdl);
out_remove_rpi_hdrs:
lpfc_sli4_remove_rpi_hdrs(phba);
out_free_active_sgl:
lpfc_free_active_sgl(phba);
out_free_sgl_list:
lpfc_free_sgl_list(phba);
out_destroy_cq_event_pool:
lpfc_sli4_cq_event_pool_destroy(phba);
out_destroy_queue:
lpfc_sli4_queue_destroy(phba);
out_free_bsmbx:
lpfc_destroy_bootstrap_mbox(phba);
out_free_mem:
lpfc_mem_free(phba);
return rc;
}
/**
* lpfc_sli4_driver_resource_unset - Unset drvr internal resources for SLI4 dev
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to unset the driver internal resources set up
* specific for supporting the SLI-4 HBA device it attached to.
**/
static void
lpfc_sli4_driver_resource_unset(struct lpfc_hba *phba)
{
struct lpfc_fcf_conn_entry *conn_entry, *next_conn_entry;
/* unregister default FCFI from the HBA */
lpfc_sli4_fcfi_unreg(phba, phba->fcf.fcfi);
/* Free the default FCR table */
lpfc_sli_remove_dflt_fcf(phba);
/* Free memory allocated for msi-x interrupt vector entries */
kfree(phba->sli4_hba.msix_entries);
/* Free memory allocated for fast-path work queue handles */
kfree(phba->sli4_hba.fcp_eq_hdl);
/* Free the allocated rpi headers. */
lpfc_sli4_remove_rpi_hdrs(phba);
lpfc_sli4_remove_rpis(phba);
/* Free the ELS sgl list */
lpfc_free_active_sgl(phba);
lpfc_free_sgl_list(phba);
/* Free the SCSI sgl management array */
kfree(phba->sli4_hba.lpfc_scsi_psb_array);
/* Free the SLI4 queues */
lpfc_sli4_queue_destroy(phba);
/* Free the completion queue EQ event pool */
lpfc_sli4_cq_event_release_all(phba);
lpfc_sli4_cq_event_pool_destroy(phba);
/* Reset SLI4 HBA FCoE function */
lpfc_pci_function_reset(phba);
/* Free the bsmbx region. */
lpfc_destroy_bootstrap_mbox(phba);
/* Free the SLI Layer memory with SLI4 HBAs */
lpfc_mem_free_all(phba);
/* Free the current connect table */
list_for_each_entry_safe(conn_entry, next_conn_entry,
&phba->fcf_conn_rec_list, list) {
list_del_init(&conn_entry->list);
kfree(conn_entry);
}
return;
}
/**
* lpfc_init_api_table_setup - Set up init api fucntion jump table
* @phba: The hba struct for which this call is being executed.
* @dev_grp: The HBA PCI-Device group number.
*
* This routine sets up the device INIT interface API function jump table
* in @phba struct.
*
* Returns: 0 - success, -ENODEV - failure.
**/
int
lpfc_init_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
{
switch (dev_grp) {
case LPFC_PCI_DEV_LP:
phba->lpfc_hba_down_post = lpfc_hba_down_post_s3;
phba->lpfc_handle_eratt = lpfc_handle_eratt_s3;
phba->lpfc_stop_port = lpfc_stop_port_s3;
break;
case LPFC_PCI_DEV_OC:
phba->lpfc_hba_down_post = lpfc_hba_down_post_s4;
phba->lpfc_handle_eratt = lpfc_handle_eratt_s4;
phba->lpfc_stop_port = lpfc_stop_port_s4;
break;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1431 Invalid HBA PCI-device group: 0x%x\n",
dev_grp);
return -ENODEV;
break;
}
return 0;
}
/**
* lpfc_setup_driver_resource_phase1 - Phase1 etup driver internal resources.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to set up the driver internal resources before the
* device specific resource setup to support the HBA device it attached to.
*
* Return codes
* 0 - sucessful
* other values - error
**/
static int
lpfc_setup_driver_resource_phase1(struct lpfc_hba *phba)
{
/*
* Driver resources common to all SLI revisions
*/
atomic_set(&phba->fast_event_count, 0);
spin_lock_init(&phba->hbalock);
/* Initialize ndlp management spinlock */
spin_lock_init(&phba->ndlp_lock);
INIT_LIST_HEAD(&phba->port_list);
INIT_LIST_HEAD(&phba->work_list);
init_waitqueue_head(&phba->wait_4_mlo_m_q);
/* Initialize the wait queue head for the kernel thread */
init_waitqueue_head(&phba->work_waitq);
/* Initialize the scsi buffer list used by driver for scsi IO */
spin_lock_init(&phba->scsi_buf_list_lock);
INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list);
/* Initialize the fabric iocb list */
INIT_LIST_HEAD(&phba->fabric_iocb_list);
/* Initialize list to save ELS buffers */
INIT_LIST_HEAD(&phba->elsbuf);
/* Initialize FCF connection rec list */
INIT_LIST_HEAD(&phba->fcf_conn_rec_list);
return 0;
}
/**
* lpfc_setup_driver_resource_phase2 - Phase2 setup driver internal resources.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to set up the driver internal resources after the
* device specific resource setup to support the HBA device it attached to.
*
* Return codes
* 0 - sucessful
* other values - error
**/
static int
lpfc_setup_driver_resource_phase2(struct lpfc_hba *phba)
{
int error;
/* Startup the kernel thread for this host adapter. */
phba->worker_thread = kthread_run(lpfc_do_work, phba,
"lpfc_worker_%d", phba->brd_no);
if (IS_ERR(phba->worker_thread)) {
error = PTR_ERR(phba->worker_thread);
return error;
}
return 0;
}
/**
* lpfc_unset_driver_resource_phase2 - Phase2 unset driver internal resources.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to unset the driver internal resources set up after
* the device specific resource setup for supporting the HBA device it
* attached to.
**/
static void
lpfc_unset_driver_resource_phase2(struct lpfc_hba *phba)
{
/* Stop kernel worker thread */
kthread_stop(phba->worker_thread);
}
/**
* lpfc_free_iocb_list - Free iocb list.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to free the driver's IOCB list and memory.
**/
static void
lpfc_free_iocb_list(struct lpfc_hba *phba)
{
struct lpfc_iocbq *iocbq_entry = NULL, *iocbq_next = NULL;
spin_lock_irq(&phba->hbalock);
list_for_each_entry_safe(iocbq_entry, iocbq_next,
&phba->lpfc_iocb_list, list) {
list_del(&iocbq_entry->list);
kfree(iocbq_entry);
phba->total_iocbq_bufs--;
}
spin_unlock_irq(&phba->hbalock);
return;
}
/**
* lpfc_init_iocb_list - Allocate and initialize iocb list.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to allocate and initizlize the driver's IOCB
* list and set up the IOCB tag array accordingly.
*
* Return codes
* 0 - sucessful
* other values - error
**/
static int
lpfc_init_iocb_list(struct lpfc_hba *phba, int iocb_count)
{
struct lpfc_iocbq *iocbq_entry = NULL;
uint16_t iotag;
int i;
/* Initialize and populate the iocb list per host. */
INIT_LIST_HEAD(&phba->lpfc_iocb_list);
for (i = 0; i < iocb_count; i++) {
iocbq_entry = kzalloc(sizeof(struct lpfc_iocbq), GFP_KERNEL);
if (iocbq_entry == NULL) {
printk(KERN_ERR "%s: only allocated %d iocbs of "
"expected %d count. Unloading driver.\n",
__func__, i, LPFC_IOCB_LIST_CNT);
goto out_free_iocbq;
}
iotag = lpfc_sli_next_iotag(phba, iocbq_entry);
if (iotag == 0) {
kfree(iocbq_entry);
printk(KERN_ERR "%s: failed to allocate IOTAG. "
"Unloading driver.\n", __func__);
goto out_free_iocbq;
}
iocbq_entry->sli4_xritag = NO_XRI;
spin_lock_irq(&phba->hbalock);
list_add(&iocbq_entry->list, &phba->lpfc_iocb_list);
phba->total_iocbq_bufs++;
spin_unlock_irq(&phba->hbalock);
}
return 0;
out_free_iocbq:
lpfc_free_iocb_list(phba);
return -ENOMEM;
}
/**
* lpfc_free_sgl_list - Free sgl list.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to free the driver's sgl list and memory.
**/
static void
lpfc_free_sgl_list(struct lpfc_hba *phba)
{
struct lpfc_sglq *sglq_entry = NULL, *sglq_next = NULL;
LIST_HEAD(sglq_list);
int rc = 0;
spin_lock_irq(&phba->hbalock);
list_splice_init(&phba->sli4_hba.lpfc_sgl_list, &sglq_list);
spin_unlock_irq(&phba->hbalock);
list_for_each_entry_safe(sglq_entry, sglq_next,
&sglq_list, list) {
list_del(&sglq_entry->list);
lpfc_mbuf_free(phba, sglq_entry->virt, sglq_entry->phys);
kfree(sglq_entry);
phba->sli4_hba.total_sglq_bufs--;
}
rc = lpfc_sli4_remove_all_sgl_pages(phba);
if (rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"2005 Unable to deregister pages from HBA: %x\n", rc);
}
kfree(phba->sli4_hba.lpfc_els_sgl_array);
}
/**
* lpfc_init_active_sgl_array - Allocate the buf to track active ELS XRIs.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to allocate the driver's active sgl memory.
* This array will hold the sglq_entry's for active IOs.
**/
static int
lpfc_init_active_sgl_array(struct lpfc_hba *phba)
{
int size;
size = sizeof(struct lpfc_sglq *);
size *= phba->sli4_hba.max_cfg_param.max_xri;
phba->sli4_hba.lpfc_sglq_active_list =
kzalloc(size, GFP_KERNEL);
if (!phba->sli4_hba.lpfc_sglq_active_list)
return -ENOMEM;
return 0;
}
/**
* lpfc_free_active_sgl - Free the buf that tracks active ELS XRIs.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to walk through the array of active sglq entries
* and free all of the resources.
* This is just a place holder for now.
**/
static void
lpfc_free_active_sgl(struct lpfc_hba *phba)
{
kfree(phba->sli4_hba.lpfc_sglq_active_list);
}
/**
* lpfc_init_sgl_list - Allocate and initialize sgl list.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to allocate and initizlize the driver's sgl
* list and set up the sgl xritag tag array accordingly.
*
* Return codes
* 0 - sucessful
* other values - error
**/
static int
lpfc_init_sgl_list(struct lpfc_hba *phba)
{
struct lpfc_sglq *sglq_entry = NULL;
int i;
int els_xri_cnt;
els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba);
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
"2400 lpfc_init_sgl_list els %d.\n",
els_xri_cnt);
/* Initialize and populate the sglq list per host/VF. */
INIT_LIST_HEAD(&phba->sli4_hba.lpfc_sgl_list);
INIT_LIST_HEAD(&phba->sli4_hba.lpfc_abts_els_sgl_list);
/* Sanity check on XRI management */
if (phba->sli4_hba.max_cfg_param.max_xri <= els_xri_cnt) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"2562 No room left for SCSI XRI allocation: "
"max_xri=%d, els_xri=%d\n",
phba->sli4_hba.max_cfg_param.max_xri,
els_xri_cnt);
return -ENOMEM;
}
/* Allocate memory for the ELS XRI management array */
phba->sli4_hba.lpfc_els_sgl_array =
kzalloc((sizeof(struct lpfc_sglq *) * els_xri_cnt),
GFP_KERNEL);
if (!phba->sli4_hba.lpfc_els_sgl_array) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"2401 Failed to allocate memory for ELS "
"XRI management array of size %d.\n",
els_xri_cnt);
return -ENOMEM;
}
/* Keep the SCSI XRI into the XRI management array */
phba->sli4_hba.scsi_xri_max =
phba->sli4_hba.max_cfg_param.max_xri - els_xri_cnt;
phba->sli4_hba.scsi_xri_cnt = 0;
phba->sli4_hba.lpfc_scsi_psb_array =
kzalloc((sizeof(struct lpfc_scsi_buf *) *
phba->sli4_hba.scsi_xri_max), GFP_KERNEL);
if (!phba->sli4_hba.lpfc_scsi_psb_array) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"2563 Failed to allocate memory for SCSI "
"XRI management array of size %d.\n",
phba->sli4_hba.scsi_xri_max);
kfree(phba->sli4_hba.lpfc_els_sgl_array);
return -ENOMEM;
}
for (i = 0; i < els_xri_cnt; i++) {
sglq_entry = kzalloc(sizeof(struct lpfc_sglq), GFP_KERNEL);
if (sglq_entry == NULL) {
printk(KERN_ERR "%s: only allocated %d sgls of "
"expected %d count. Unloading driver.\n",
__func__, i, els_xri_cnt);
goto out_free_mem;
}
sglq_entry->sli4_xritag = lpfc_sli4_next_xritag(phba);
if (sglq_entry->sli4_xritag == NO_XRI) {
kfree(sglq_entry);
printk(KERN_ERR "%s: failed to allocate XRI.\n"
"Unloading driver.\n", __func__);
goto out_free_mem;
}
sglq_entry->buff_type = GEN_BUFF_TYPE;
sglq_entry->virt = lpfc_mbuf_alloc(phba, 0, &sglq_entry->phys);
if (sglq_entry->virt == NULL) {
kfree(sglq_entry);
printk(KERN_ERR "%s: failed to allocate mbuf.\n"
"Unloading driver.\n", __func__);
goto out_free_mem;
}
sglq_entry->sgl = sglq_entry->virt;
memset(sglq_entry->sgl, 0, LPFC_BPL_SIZE);
/* The list order is used by later block SGL registraton */
spin_lock_irq(&phba->hbalock);
list_add_tail(&sglq_entry->list, &phba->sli4_hba.lpfc_sgl_list);
phba->sli4_hba.lpfc_els_sgl_array[i] = sglq_entry;
phba->sli4_hba.total_sglq_bufs++;
spin_unlock_irq(&phba->hbalock);
}
return 0;
out_free_mem:
kfree(phba->sli4_hba.lpfc_scsi_psb_array);
lpfc_free_sgl_list(phba);
return -ENOMEM;
}
/**
* lpfc_sli4_init_rpi_hdrs - Post the rpi header memory region to the port
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to post rpi header templates to the
* HBA consistent with the SLI-4 interface spec. This routine
* posts a PAGE_SIZE memory region to the port to hold up to
* PAGE_SIZE modulo 64 rpi context headers.
* No locks are held here because this is an initialization routine
* called only from probe or lpfc_online when interrupts are not
* enabled and the driver is reinitializing the device.
*
* Return codes
* 0 - sucessful
* ENOMEM - No availble memory
* EIO - The mailbox failed to complete successfully.
**/
int
lpfc_sli4_init_rpi_hdrs(struct lpfc_hba *phba)
{
int rc = 0;
int longs;
uint16_t rpi_count;
struct lpfc_rpi_hdr *rpi_hdr;
INIT_LIST_HEAD(&phba->sli4_hba.lpfc_rpi_hdr_list);
/*
* Provision an rpi bitmask range for discovery. The total count
* is the difference between max and base + 1.
*/
rpi_count = phba->sli4_hba.max_cfg_param.rpi_base +
phba->sli4_hba.max_cfg_param.max_rpi - 1;
longs = ((rpi_count) + BITS_PER_LONG - 1) / BITS_PER_LONG;
phba->sli4_hba.rpi_bmask = kzalloc(longs * sizeof(unsigned long),
GFP_KERNEL);
if (!phba->sli4_hba.rpi_bmask)
return -ENOMEM;
rpi_hdr = lpfc_sli4_create_rpi_hdr(phba);
if (!rpi_hdr) {
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
"0391 Error during rpi post operation\n");
lpfc_sli4_remove_rpis(phba);
rc = -ENODEV;
}
return rc;
}
/**
* lpfc_sli4_create_rpi_hdr - Allocate an rpi header memory region
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to allocate a single 4KB memory region to
* support rpis and stores them in the phba. This single region
* provides support for up to 64 rpis. The region is used globally
* by the device.
*
* Returns:
* A valid rpi hdr on success.
* A NULL pointer on any failure.
**/
struct lpfc_rpi_hdr *
lpfc_sli4_create_rpi_hdr(struct lpfc_hba *phba)
{
uint16_t rpi_limit, curr_rpi_range;
struct lpfc_dmabuf *dmabuf;
struct lpfc_rpi_hdr *rpi_hdr;
rpi_limit = phba->sli4_hba.max_cfg_param.rpi_base +
phba->sli4_hba.max_cfg_param.max_rpi - 1;
spin_lock_irq(&phba->hbalock);
curr_rpi_range = phba->sli4_hba.next_rpi;
spin_unlock_irq(&phba->hbalock);
/*
* The port has a limited number of rpis. The increment here
* is LPFC_RPI_HDR_COUNT - 1 to account for the starting value
* and to allow the full max_rpi range per port.
*/
if ((curr_rpi_range + (LPFC_RPI_HDR_COUNT - 1)) > rpi_limit)
return NULL;
/*
* First allocate the protocol header region for the port. The
* port expects a 4KB DMA-mapped memory region that is 4K aligned.
*/
dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
if (!dmabuf)
return NULL;
dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
LPFC_HDR_TEMPLATE_SIZE,
&dmabuf->phys,
GFP_KERNEL);
if (!dmabuf->virt) {
rpi_hdr = NULL;
goto err_free_dmabuf;
}
memset(dmabuf->virt, 0, LPFC_HDR_TEMPLATE_SIZE);
if (!IS_ALIGNED(dmabuf->phys, LPFC_HDR_TEMPLATE_SIZE)) {
rpi_hdr = NULL;
goto err_free_coherent;
}
/* Save the rpi header data for cleanup later. */
rpi_hdr = kzalloc(sizeof(struct lpfc_rpi_hdr), GFP_KERNEL);
if (!rpi_hdr)
goto err_free_coherent;
rpi_hdr->dmabuf = dmabuf;
rpi_hdr->len = LPFC_HDR_TEMPLATE_SIZE;
rpi_hdr->page_count = 1;
spin_lock_irq(&phba->hbalock);
rpi_hdr->start_rpi = phba->sli4_hba.next_rpi;
list_add_tail(&rpi_hdr->list, &phba->sli4_hba.lpfc_rpi_hdr_list);
/*
* The next_rpi stores the next module-64 rpi value to post
* in any subsequent rpi memory region postings.
*/
phba->sli4_hba.next_rpi += LPFC_RPI_HDR_COUNT;
spin_unlock_irq(&phba->hbalock);
return rpi_hdr;
err_free_coherent:
dma_free_coherent(&phba->pcidev->dev, LPFC_HDR_TEMPLATE_SIZE,
dmabuf->virt, dmabuf->phys);
err_free_dmabuf:
kfree(dmabuf);
return NULL;
}
/**
* lpfc_sli4_remove_rpi_hdrs - Remove all rpi header memory regions
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to remove all memory resources allocated
* to support rpis. This routine presumes the caller has released all
* rpis consumed by fabric or port logins and is prepared to have
* the header pages removed.
**/
void
lpfc_sli4_remove_rpi_hdrs(struct lpfc_hba *phba)
{
struct lpfc_rpi_hdr *rpi_hdr, *next_rpi_hdr;
list_for_each_entry_safe(rpi_hdr, next_rpi_hdr,
&phba->sli4_hba.lpfc_rpi_hdr_list, list) {
list_del(&rpi_hdr->list);
dma_free_coherent(&phba->pcidev->dev, rpi_hdr->len,
rpi_hdr->dmabuf->virt, rpi_hdr->dmabuf->phys);
kfree(rpi_hdr->dmabuf);
kfree(rpi_hdr);
}
phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.rpi_base;
memset(phba->sli4_hba.rpi_bmask, 0, sizeof(*phba->sli4_hba.rpi_bmask));
}
/**
* lpfc_hba_alloc - Allocate driver hba data structure for a device.
* @pdev: pointer to pci device data structure.
*
* This routine is invoked to allocate the driver hba data structure for an
* HBA device. If the allocation is successful, the phba reference to the
* PCI device data structure is set.
*
* Return codes
* pointer to @phba - sucessful
* NULL - error
**/
static struct lpfc_hba *
lpfc_hba_alloc(struct pci_dev *pdev)
{
struct lpfc_hba *phba;
/* Allocate memory for HBA structure */
phba = kzalloc(sizeof(struct lpfc_hba), GFP_KERNEL);
if (!phba) {
dev_err(&pdev->dev, "failed to allocate hba struct\n");
return NULL;
}
/* Set reference to PCI device in HBA structure */
phba->pcidev = pdev;
/* Assign an unused board number */
phba->brd_no = lpfc_get_instance();
if (phba->brd_no < 0) {
kfree(phba);
return NULL;
}
mutex_init(&phba->ct_event_mutex);
INIT_LIST_HEAD(&phba->ct_ev_waiters);
return phba;
}
/**
* lpfc_hba_free - Free driver hba data structure with a device.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to free the driver hba data structure with an
* HBA device.
**/
static void
lpfc_hba_free(struct lpfc_hba *phba)
{
/* Release the driver assigned board number */
idr_remove(&lpfc_hba_index, phba->brd_no);
kfree(phba);
return;
}
/**
* lpfc_create_shost - Create hba physical port with associated scsi host.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to create HBA physical port and associate a SCSI
* host with it.
*
* Return codes
* 0 - sucessful
* other values - error
**/
static int
lpfc_create_shost(struct lpfc_hba *phba)
{
struct lpfc_vport *vport;
struct Scsi_Host *shost;
/* Initialize HBA FC structure */
phba->fc_edtov = FF_DEF_EDTOV;
phba->fc_ratov = FF_DEF_RATOV;
phba->fc_altov = FF_DEF_ALTOV;
phba->fc_arbtov = FF_DEF_ARBTOV;
vport = lpfc_create_port(phba, phba->brd_no, &phba->pcidev->dev);
if (!vport)
return -ENODEV;
shost = lpfc_shost_from_vport(vport);
phba->pport = vport;
lpfc_debugfs_initialize(vport);
/* Put reference to SCSI host to driver's device private data */
pci_set_drvdata(phba->pcidev, shost);
return 0;
}
/**
* lpfc_destroy_shost - Destroy hba physical port with associated scsi host.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to destroy HBA physical port and the associated
* SCSI host.
**/
static void
lpfc_destroy_shost(struct lpfc_hba *phba)
{
struct lpfc_vport *vport = phba->pport;
/* Destroy physical port that associated with the SCSI host */
destroy_port(vport);
return;
}
/**
* lpfc_setup_bg - Setup Block guard structures and debug areas.
* @phba: pointer to lpfc hba data structure.
* @shost: the shost to be used to detect Block guard settings.
*
* This routine sets up the local Block guard protocol settings for @shost.
* This routine also allocates memory for debugging bg buffers.
**/
static void
lpfc_setup_bg(struct lpfc_hba *phba, struct Scsi_Host *shost)
{
int pagecnt = 10;
if (lpfc_prot_mask && lpfc_prot_guard) {
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"1478 Registering BlockGuard with the "
"SCSI layer\n");
scsi_host_set_prot(shost, lpfc_prot_mask);
scsi_host_set_guard(shost, lpfc_prot_guard);
}
if (!_dump_buf_data) {
while (pagecnt) {
spin_lock_init(&_dump_buf_lock);
_dump_buf_data =
(char *) __get_free_pages(GFP_KERNEL, pagecnt);
if (_dump_buf_data) {
lpfc_printf_log(phba, KERN_ERR, LOG_BG,
"9043 BLKGRD: allocated %d pages for "
"_dump_buf_data at 0x%p\n",
(1 << pagecnt), _dump_buf_data);
_dump_buf_data_order = pagecnt;
memset(_dump_buf_data, 0,
((1 << PAGE_SHIFT) << pagecnt));
break;
} else
--pagecnt;
}
if (!_dump_buf_data_order)
lpfc_printf_log(phba, KERN_ERR, LOG_BG,
"9044 BLKGRD: ERROR unable to allocate "
"memory for hexdump\n");
} else
lpfc_printf_log(phba, KERN_ERR, LOG_BG,
"9045 BLKGRD: already allocated _dump_buf_data=0x%p"
"\n", _dump_buf_data);
if (!_dump_buf_dif) {
while (pagecnt) {
_dump_buf_dif =
(char *) __get_free_pages(GFP_KERNEL, pagecnt);
if (_dump_buf_dif) {
lpfc_printf_log(phba, KERN_ERR, LOG_BG,
"9046 BLKGRD: allocated %d pages for "
"_dump_buf_dif at 0x%p\n",
(1 << pagecnt), _dump_buf_dif);
_dump_buf_dif_order = pagecnt;
memset(_dump_buf_dif, 0,
((1 << PAGE_SHIFT) << pagecnt));
break;
} else
--pagecnt;
}
if (!_dump_buf_dif_order)
lpfc_printf_log(phba, KERN_ERR, LOG_BG,
"9047 BLKGRD: ERROR unable to allocate "
"memory for hexdump\n");
} else
lpfc_printf_log(phba, KERN_ERR, LOG_BG,
"9048 BLKGRD: already allocated _dump_buf_dif=0x%p\n",
_dump_buf_dif);
}
/**
* lpfc_post_init_setup - Perform necessary device post initialization setup.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to perform all the necessary post initialization
* setup for the device.
**/
static void
lpfc_post_init_setup(struct lpfc_hba *phba)
{
struct Scsi_Host *shost;
struct lpfc_adapter_event_header adapter_event;
/* Get the default values for Model Name and Description */
lpfc_get_hba_model_desc(phba, phba->ModelName, phba->ModelDesc);
/*
* hba setup may have changed the hba_queue_depth so we need to
* adjust the value of can_queue.
*/
shost = pci_get_drvdata(phba->pcidev);
shost->can_queue = phba->cfg_hba_queue_depth - 10;
if (phba->sli3_options & LPFC_SLI3_BG_ENABLED)
lpfc_setup_bg(phba, shost);
lpfc_host_attrib_init(shost);
if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
spin_lock_irq(shost->host_lock);
lpfc_poll_start_timer(phba);
spin_unlock_irq(shost->host_lock);
}
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0428 Perform SCSI scan\n");
/* Send board arrival event to upper layer */
adapter_event.event_type = FC_REG_ADAPTER_EVENT;
adapter_event.subcategory = LPFC_EVENT_ARRIVAL;
fc_host_post_vendor_event(shost, fc_get_event_number(),
sizeof(adapter_event),
(char *) &adapter_event,
LPFC_NL_VENDOR_ID);
return;
}
/**
* lpfc_sli_pci_mem_setup - Setup SLI3 HBA PCI memory space.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to set up the PCI device memory space for device
* with SLI-3 interface spec.
*
* Return codes
* 0 - sucessful
* other values - error
**/
static int
lpfc_sli_pci_mem_setup(struct lpfc_hba *phba)
{
struct pci_dev *pdev;
unsigned long bar0map_len, bar2map_len;
int i, hbq_count;
void *ptr;
int error = -ENODEV;
/* Obtain PCI device reference */
if (!phba->pcidev)
return error;
else
pdev = phba->pcidev;
/* Set the device DMA mask size */
if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)
if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)
return error;
/* Get the bus address of Bar0 and Bar2 and the number of bytes
* required by each mapping.
*/
phba->pci_bar0_map = pci_resource_start(pdev, 0);
bar0map_len = pci_resource_len(pdev, 0);
phba->pci_bar2_map = pci_resource_start(pdev, 2);
bar2map_len = pci_resource_len(pdev, 2);
/* Map HBA SLIM to a kernel virtual address. */
phba->slim_memmap_p = ioremap(phba->pci_bar0_map, bar0map_len);
if (!phba->slim_memmap_p) {
dev_printk(KERN_ERR, &pdev->dev,
"ioremap failed for SLIM memory.\n");
goto out;
}
/* Map HBA Control Registers to a kernel virtual address. */
phba->ctrl_regs_memmap_p = ioremap(phba->pci_bar2_map, bar2map_len);
if (!phba->ctrl_regs_memmap_p) {
dev_printk(KERN_ERR, &pdev->dev,
"ioremap failed for HBA control registers.\n");
goto out_iounmap_slim;
}
/* Allocate memory for SLI-2 structures */
phba->slim2p.virt = dma_alloc_coherent(&pdev->dev,
SLI2_SLIM_SIZE,
&phba->slim2p.phys,
GFP_KERNEL);
if (!phba->slim2p.virt)
goto out_iounmap;
memset(phba->slim2p.virt, 0, SLI2_SLIM_SIZE);
phba->mbox = phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, mbx);
phba->pcb = (phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, pcb));
phba->IOCBs = (phba->slim2p.virt +
offsetof(struct lpfc_sli2_slim, IOCBs));
phba->hbqslimp.virt = dma_alloc_coherent(&pdev->dev,
lpfc_sli_hbq_size(),
&phba->hbqslimp.phys,
GFP_KERNEL);
if (!phba->hbqslimp.virt)
goto out_free_slim;
hbq_count = lpfc_sli_hbq_count();
ptr = phba->hbqslimp.virt;
for (i = 0; i < hbq_count; ++i) {
phba->hbqs[i].hbq_virt = ptr;
INIT_LIST_HEAD(&phba->hbqs[i].hbq_buffer_list);
ptr += (lpfc_hbq_defs[i]->entry_count *
sizeof(struct lpfc_hbq_entry));
}
phba->hbqs[LPFC_ELS_HBQ].hbq_alloc_buffer = lpfc_els_hbq_alloc;
phba->hbqs[LPFC_ELS_HBQ].hbq_free_buffer = lpfc_els_hbq_free;
memset(phba->hbqslimp.virt, 0, lpfc_sli_hbq_size());
INIT_LIST_HEAD(&phba->rb_pend_list);
phba->MBslimaddr = phba->slim_memmap_p;
phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET;
phba->CAregaddr = phba->ctrl_regs_memmap_p + CA_REG_OFFSET;
phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET;
phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET;
return 0;
out_free_slim:
dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
phba->slim2p.virt, phba->slim2p.phys);
out_iounmap:
iounmap(phba->ctrl_regs_memmap_p);
out_iounmap_slim:
iounmap(phba->slim_memmap_p);
out:
return error;
}
/**
* lpfc_sli_pci_mem_unset - Unset SLI3 HBA PCI memory space.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to unset the PCI device memory space for device
* with SLI-3 interface spec.
**/
static void
lpfc_sli_pci_mem_unset(struct lpfc_hba *phba)
{
struct pci_dev *pdev;
/* Obtain PCI device reference */
if (!phba->pcidev)
return;
else
pdev = phba->pcidev;
/* Free coherent DMA memory allocated */
dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(),
phba->hbqslimp.virt, phba->hbqslimp.phys);
dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
phba->slim2p.virt, phba->slim2p.phys);
/* I/O memory unmap */
iounmap(phba->ctrl_regs_memmap_p);
iounmap(phba->slim_memmap_p);
return;
}
/**
* lpfc_sli4_post_status_check - Wait for SLI4 POST done and check status
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to wait for SLI4 device Power On Self Test (POST)
* done and check status.
*
* Return 0 if successful, otherwise -ENODEV.
**/
int
lpfc_sli4_post_status_check(struct lpfc_hba *phba)
{
struct lpfc_register sta_reg, uerrlo_reg, uerrhi_reg, scratchpad;
uint32_t onlnreg0, onlnreg1;
int i, port_error = -ENODEV;
if (!phba->sli4_hba.STAregaddr)
return -ENODEV;
/* Wait up to 30 seconds for the SLI Port POST done and ready */
for (i = 0; i < 3000; i++) {
sta_reg.word0 = readl(phba->sli4_hba.STAregaddr);
/* Encounter fatal POST error, break out */
if (bf_get(lpfc_hst_state_perr, &sta_reg)) {
port_error = -ENODEV;
break;
}
if (LPFC_POST_STAGE_ARMFW_READY ==
bf_get(lpfc_hst_state_port_status, &sta_reg)) {
port_error = 0;
break;
}
msleep(10);
}
if (port_error)
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1408 Failure HBA POST Status: sta_reg=0x%x, "
"perr=x%x, sfi=x%x, nip=x%x, ipc=x%x, xrom=x%x, "
"dl=x%x, pstatus=x%x\n", sta_reg.word0,
bf_get(lpfc_hst_state_perr, &sta_reg),
bf_get(lpfc_hst_state_sfi, &sta_reg),
bf_get(lpfc_hst_state_nip, &sta_reg),
bf_get(lpfc_hst_state_ipc, &sta_reg),
bf_get(lpfc_hst_state_xrom, &sta_reg),
bf_get(lpfc_hst_state_dl, &sta_reg),
bf_get(lpfc_hst_state_port_status, &sta_reg));
/* Log device information */
scratchpad.word0 = readl(phba->sli4_hba.SCRATCHPADregaddr);
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"2534 Device Info: ChipType=0x%x, SliRev=0x%x, "
"FeatureL1=0x%x, FeatureL2=0x%x\n",
bf_get(lpfc_scratchpad_chiptype, &scratchpad),
bf_get(lpfc_scratchpad_slirev, &scratchpad),
bf_get(lpfc_scratchpad_featurelevel1, &scratchpad),
bf_get(lpfc_scratchpad_featurelevel2, &scratchpad));
/* With uncoverable error, log the error message and return error */
onlnreg0 = readl(phba->sli4_hba.ONLINE0regaddr);
onlnreg1 = readl(phba->sli4_hba.ONLINE1regaddr);
if ((onlnreg0 != LPFC_ONLINE_NERR) || (onlnreg1 != LPFC_ONLINE_NERR)) {
uerrlo_reg.word0 = readl(phba->sli4_hba.UERRLOregaddr);
uerrhi_reg.word0 = readl(phba->sli4_hba.UERRHIregaddr);
if (uerrlo_reg.word0 || uerrhi_reg.word0) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1422 HBA Unrecoverable error: "
"uerr_lo_reg=0x%x, uerr_hi_reg=0x%x, "
"online0_reg=0x%x, online1_reg=0x%x\n",
uerrlo_reg.word0, uerrhi_reg.word0,
onlnreg0, onlnreg1);
}
return -ENODEV;
}
return port_error;
}
/**
* lpfc_sli4_bar0_register_memmap - Set up SLI4 BAR0 register memory map.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to set up SLI4 BAR0 PCI config space register
* memory map.
**/
static void
lpfc_sli4_bar0_register_memmap(struct lpfc_hba *phba)
{
phba->sli4_hba.UERRLOregaddr = phba->sli4_hba.conf_regs_memmap_p +
LPFC_UERR_STATUS_LO;
phba->sli4_hba.UERRHIregaddr = phba->sli4_hba.conf_regs_memmap_p +
LPFC_UERR_STATUS_HI;
phba->sli4_hba.ONLINE0regaddr = phba->sli4_hba.conf_regs_memmap_p +
LPFC_ONLINE0;
phba->sli4_hba.ONLINE1regaddr = phba->sli4_hba.conf_regs_memmap_p +
LPFC_ONLINE1;
phba->sli4_hba.SCRATCHPADregaddr = phba->sli4_hba.conf_regs_memmap_p +
LPFC_SCRATCHPAD;
}
/**
* lpfc_sli4_bar1_register_memmap - Set up SLI4 BAR1 register memory map.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to set up SLI4 BAR1 control status register (CSR)
* memory map.
**/
static void
lpfc_sli4_bar1_register_memmap(struct lpfc_hba *phba)
{
phba->sli4_hba.STAregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
LPFC_HST_STATE;
phba->sli4_hba.ISRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
LPFC_HST_ISR0;
phba->sli4_hba.IMRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
LPFC_HST_IMR0;
phba->sli4_hba.ISCRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
LPFC_HST_ISCR0;
return;
}
/**
* lpfc_sli4_bar2_register_memmap - Set up SLI4 BAR2 register memory map.
* @phba: pointer to lpfc hba data structure.
* @vf: virtual function number
*
* This routine is invoked to set up SLI4 BAR2 doorbell register memory map
* based on the given viftual function number, @vf.
*
* Return 0 if successful, otherwise -ENODEV.
**/
static int
lpfc_sli4_bar2_register_memmap(struct lpfc_hba *phba, uint32_t vf)
{
if (vf > LPFC_VIR_FUNC_MAX)
return -ENODEV;
phba->sli4_hba.RQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
vf * LPFC_VFR_PAGE_SIZE + LPFC_RQ_DOORBELL);
phba->sli4_hba.WQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
vf * LPFC_VFR_PAGE_SIZE + LPFC_WQ_DOORBELL);
phba->sli4_hba.EQCQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
vf * LPFC_VFR_PAGE_SIZE + LPFC_EQCQ_DOORBELL);
phba->sli4_hba.MQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
vf * LPFC_VFR_PAGE_SIZE + LPFC_MQ_DOORBELL);
phba->sli4_hba.BMBXregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
vf * LPFC_VFR_PAGE_SIZE + LPFC_BMBX);
return 0;
}
/**
* lpfc_create_bootstrap_mbox - Create the bootstrap mailbox
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to create the bootstrap mailbox
* region consistent with the SLI-4 interface spec. This
* routine allocates all memory necessary to communicate
* mailbox commands to the port and sets up all alignment
* needs. No locks are expected to be held when calling
* this routine.
*
* Return codes
* 0 - sucessful
* ENOMEM - could not allocated memory.
**/
static int
lpfc_create_bootstrap_mbox(struct lpfc_hba *phba)
{
uint32_t bmbx_size;
struct lpfc_dmabuf *dmabuf;
struct dma_address *dma_address;
uint32_t pa_addr;
uint64_t phys_addr;
dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
if (!dmabuf)
return -ENOMEM;
/*
* The bootstrap mailbox region is comprised of 2 parts
* plus an alignment restriction of 16 bytes.
*/
bmbx_size = sizeof(struct lpfc_bmbx_create) + (LPFC_ALIGN_16_BYTE - 1);
dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
bmbx_size,
&dmabuf->phys,
GFP_KERNEL);
if (!dmabuf->virt) {
kfree(dmabuf);
return -ENOMEM;
}
memset(dmabuf->virt, 0, bmbx_size);
/*
* Initialize the bootstrap mailbox pointers now so that the register
* operations are simple later. The mailbox dma address is required
* to be 16-byte aligned. Also align the virtual memory as each
* maibox is copied into the bmbx mailbox region before issuing the
* command to the port.
*/
phba->sli4_hba.bmbx.dmabuf = dmabuf;
phba->sli4_hba.bmbx.bmbx_size = bmbx_size;
phba->sli4_hba.bmbx.avirt = PTR_ALIGN(dmabuf->virt,
LPFC_ALIGN_16_BYTE);
phba->sli4_hba.bmbx.aphys = ALIGN(dmabuf->phys,
LPFC_ALIGN_16_BYTE);
/*
* Set the high and low physical addresses now. The SLI4 alignment
* requirement is 16 bytes and the mailbox is posted to the port
* as two 30-bit addresses. The other data is a bit marking whether
* the 30-bit address is the high or low address.
* Upcast bmbx aphys to 64bits so shift instruction compiles
* clean on 32 bit machines.
*/
dma_address = &phba->sli4_hba.bmbx.dma_address;
phys_addr = (uint64_t)phba->sli4_hba.bmbx.aphys;
pa_addr = (uint32_t) ((phys_addr >> 34) & 0x3fffffff);
dma_address->addr_hi = (uint32_t) ((pa_addr << 2) |
LPFC_BMBX_BIT1_ADDR_HI);
pa_addr = (uint32_t) ((phba->sli4_hba.bmbx.aphys >> 4) & 0x3fffffff);
dma_address->addr_lo = (uint32_t) ((pa_addr << 2) |
LPFC_BMBX_BIT1_ADDR_LO);
return 0;
}
/**
* lpfc_destroy_bootstrap_mbox - Destroy all bootstrap mailbox resources
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to teardown the bootstrap mailbox
* region and release all host resources. This routine requires
* the caller to ensure all mailbox commands recovered, no
* additional mailbox comands are sent, and interrupts are disabled
* before calling this routine.
*
**/
static void
lpfc_destroy_bootstrap_mbox(struct lpfc_hba *phba)
{
dma_free_coherent(&phba->pcidev->dev,
phba->sli4_hba.bmbx.bmbx_size,
phba->sli4_hba.bmbx.dmabuf->virt,
phba->sli4_hba.bmbx.dmabuf->phys);
kfree(phba->sli4_hba.bmbx.dmabuf);
memset(&phba->sli4_hba.bmbx, 0, sizeof(struct lpfc_bmbx));
}
/**
* lpfc_sli4_read_config - Get the config parameters.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to read the configuration parameters from the HBA.
* The configuration parameters are used to set the base and maximum values
* for RPI's XRI's VPI's VFI's and FCFIs. These values also affect the resource
* allocation for the port.
*
* Return codes
* 0 - sucessful
* ENOMEM - No availble memory
* EIO - The mailbox failed to complete successfully.
**/
static int
lpfc_sli4_read_config(struct lpfc_hba *phba)
{
LPFC_MBOXQ_t *pmb;
struct lpfc_mbx_read_config *rd_config;
uint32_t rc = 0;
pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!pmb) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"2011 Unable to allocate memory for issuing "
"SLI_CONFIG_SPECIAL mailbox command\n");
return -ENOMEM;
}
lpfc_read_config(phba, pmb);
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
if (rc != MBX_SUCCESS) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"2012 Mailbox failed , mbxCmd x%x "
"READ_CONFIG, mbxStatus x%x\n",
bf_get(lpfc_mqe_command, &pmb->u.mqe),
bf_get(lpfc_mqe_status, &pmb->u.mqe));
rc = -EIO;
} else {
rd_config = &pmb->u.mqe.un.rd_config;
phba->sli4_hba.max_cfg_param.max_xri =
bf_get(lpfc_mbx_rd_conf_xri_count, rd_config);
phba->sli4_hba.max_cfg_param.xri_base =
bf_get(lpfc_mbx_rd_conf_xri_base, rd_config);
phba->sli4_hba.max_cfg_param.max_vpi =
bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config);
phba->sli4_hba.max_cfg_param.vpi_base =
bf_get(lpfc_mbx_rd_conf_vpi_base, rd_config);
phba->sli4_hba.max_cfg_param.max_rpi =
bf_get(lpfc_mbx_rd_conf_rpi_count, rd_config);
phba->sli4_hba.max_cfg_param.rpi_base =
bf_get(lpfc_mbx_rd_conf_rpi_base, rd_config);
phba->sli4_hba.max_cfg_param.max_vfi =
bf_get(lpfc_mbx_rd_conf_vfi_count, rd_config);
phba->sli4_hba.max_cfg_param.vfi_base =
bf_get(lpfc_mbx_rd_conf_vfi_base, rd_config);
phba->sli4_hba.max_cfg_param.max_fcfi =
bf_get(lpfc_mbx_rd_conf_fcfi_count, rd_config);
phba->sli4_hba.max_cfg_param.fcfi_base =
bf_get(lpfc_mbx_rd_conf_fcfi_base, rd_config);
phba->sli4_hba.max_cfg_param.max_eq =
bf_get(lpfc_mbx_rd_conf_eq_count, rd_config);
phba->sli4_hba.max_cfg_param.max_rq =
bf_get(lpfc_mbx_rd_conf_rq_count, rd_config);
phba->sli4_hba.max_cfg_param.max_wq =
bf_get(lpfc_mbx_rd_conf_wq_count, rd_config);
phba->sli4_hba.max_cfg_param.max_cq =
bf_get(lpfc_mbx_rd_conf_cq_count, rd_config);
phba->lmt = bf_get(lpfc_mbx_rd_conf_lmt, rd_config);
phba->sli4_hba.next_xri = phba->sli4_hba.max_cfg_param.xri_base;
phba->vpi_base = phba->sli4_hba.max_cfg_param.vpi_base;
phba->vfi_base = phba->sli4_hba.max_cfg_param.vfi_base;
phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.rpi_base;
phba->max_vpi = (phba->sli4_hba.max_cfg_param.max_vpi > 0) ?
(phba->sli4_hba.max_cfg_param.max_vpi - 1) : 0;
phba->max_vports = phba->max_vpi;
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
"2003 cfg params XRI(B:%d M:%d), "
"VPI(B:%d M:%d) "
"VFI(B:%d M:%d) "
"RPI(B:%d M:%d) "
"FCFI(B:%d M:%d)\n",
phba->sli4_hba.max_cfg_param.xri_base,
phba->sli4_hba.max_cfg_param.max_xri,
phba->sli4_hba.max_cfg_param.vpi_base,
phba->sli4_hba.max_cfg_param.max_vpi,
phba->sli4_hba.max_cfg_param.vfi_base,
phba->sli4_hba.max_cfg_param.max_vfi,
phba->sli4_hba.max_cfg_param.rpi_base,
phba->sli4_hba.max_cfg_param.max_rpi,
phba->sli4_hba.max_cfg_param.fcfi_base,
phba->sli4_hba.max_cfg_param.max_fcfi);
}
mempool_free(pmb, phba->mbox_mem_pool);
/* Reset the DFT_HBA_Q_DEPTH to the max xri */
if (phba->cfg_hba_queue_depth > (phba->sli4_hba.max_cfg_param.max_xri))
phba->cfg_hba_queue_depth =
phba->sli4_hba.max_cfg_param.max_xri;
return rc;
}
/**
* lpfc_dev_endian_order_setup - Notify the port of the host's endian order.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to setup the host-side endian order to the
* HBA consistent with the SLI-4 interface spec.
*
* Return codes
* 0 - sucessful
* ENOMEM - No availble memory
* EIO - The mailbox failed to complete successfully.
**/
static int
lpfc_setup_endian_order(struct lpfc_hba *phba)
{
LPFC_MBOXQ_t *mboxq;
uint32_t rc = 0;
uint32_t endian_mb_data[2] = {HOST_ENDIAN_LOW_WORD0,
HOST_ENDIAN_HIGH_WORD1};
mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mboxq) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0492 Unable to allocate memory for issuing "
"SLI_CONFIG_SPECIAL mailbox command\n");
return -ENOMEM;
}
/*
* The SLI4_CONFIG_SPECIAL mailbox command requires the first two
* words to contain special data values and no other data.
*/
memset(mboxq, 0, sizeof(LPFC_MBOXQ_t));
memcpy(&mboxq->u.mqe, &endian_mb_data, sizeof(endian_mb_data));
rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
if (rc != MBX_SUCCESS) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0493 SLI_CONFIG_SPECIAL mailbox failed with "
"status x%x\n",
rc);
rc = -EIO;
}
mempool_free(mboxq, phba->mbox_mem_pool);
return rc;
}
/**
* lpfc_sli4_queue_create - Create all the SLI4 queues
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to allocate all the SLI4 queues for the FCoE HBA
* operation. For each SLI4 queue type, the parameters such as queue entry
* count (queue depth) shall be taken from the module parameter. For now,
* we just use some constant number as place holder.
*
* Return codes
* 0 - sucessful
* ENOMEM - No availble memory
* EIO - The mailbox failed to complete successfully.
**/
static int
lpfc_sli4_queue_create(struct lpfc_hba *phba)
{
struct lpfc_queue *qdesc;
int fcp_eqidx, fcp_cqidx, fcp_wqidx;
int cfg_fcp_wq_count;
int cfg_fcp_eq_count;
/*
* Sanity check for confiugred queue parameters against the run-time
* device parameters
*/
/* Sanity check on FCP fast-path WQ parameters */
cfg_fcp_wq_count = phba->cfg_fcp_wq_count;
if (cfg_fcp_wq_count >
(phba->sli4_hba.max_cfg_param.max_wq - LPFC_SP_WQN_DEF)) {
cfg_fcp_wq_count = phba->sli4_hba.max_cfg_param.max_wq -
LPFC_SP_WQN_DEF;
if (cfg_fcp_wq_count < LPFC_FP_WQN_MIN) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2581 Not enough WQs (%d) from "
"the pci function for supporting "
"FCP WQs (%d)\n",
phba->sli4_hba.max_cfg_param.max_wq,
phba->cfg_fcp_wq_count);
goto out_error;
}
lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
"2582 Not enough WQs (%d) from the pci "
"function for supporting the requested "
"FCP WQs (%d), the actual FCP WQs can "
"be supported: %d\n",
phba->sli4_hba.max_cfg_param.max_wq,
phba->cfg_fcp_wq_count, cfg_fcp_wq_count);
}
/* The actual number of FCP work queues adopted */
phba->cfg_fcp_wq_count = cfg_fcp_wq_count;
/* Sanity check on FCP fast-path EQ parameters */
cfg_fcp_eq_count = phba->cfg_fcp_eq_count;
if (cfg_fcp_eq_count >
(phba->sli4_hba.max_cfg_param.max_eq - LPFC_SP_EQN_DEF)) {
cfg_fcp_eq_count = phba->sli4_hba.max_cfg_param.max_eq -
LPFC_SP_EQN_DEF;
if (cfg_fcp_eq_count < LPFC_FP_EQN_MIN) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2574 Not enough EQs (%d) from the "
"pci function for supporting FCP "
"EQs (%d)\n",
phba->sli4_hba.max_cfg_param.max_eq,
phba->cfg_fcp_eq_count);
goto out_error;
}
lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
"2575 Not enough EQs (%d) from the pci "
"function for supporting the requested "
"FCP EQs (%d), the actual FCP EQs can "
"be supported: %d\n",
phba->sli4_hba.max_cfg_param.max_eq,
phba->cfg_fcp_eq_count, cfg_fcp_eq_count);
}
/* It does not make sense to have more EQs than WQs */
if (cfg_fcp_eq_count > phba->cfg_fcp_wq_count) {
lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
"2593 The FCP EQ count(%d) cannot be greater "
"than the FCP WQ count(%d), limiting the "
"FCP EQ count to %d\n", cfg_fcp_eq_count,
phba->cfg_fcp_wq_count,
phba->cfg_fcp_wq_count);
cfg_fcp_eq_count = phba->cfg_fcp_wq_count;
}
/* The actual number of FCP event queues adopted */
phba->cfg_fcp_eq_count = cfg_fcp_eq_count;
/* The overall number of event queues used */
phba->sli4_hba.cfg_eqn = phba->cfg_fcp_eq_count + LPFC_SP_EQN_DEF;
/*
* Create Event Queues (EQs)
*/
/* Get EQ depth from module parameter, fake the default for now */
phba->sli4_hba.eq_esize = LPFC_EQE_SIZE_4B;
phba->sli4_hba.eq_ecount = LPFC_EQE_DEF_COUNT;
/* Create slow path event queue */
qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.eq_esize,
phba->sli4_hba.eq_ecount);
if (!qdesc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0496 Failed allocate slow-path EQ\n");
goto out_error;
}
phba->sli4_hba.sp_eq = qdesc;
/* Create fast-path FCP Event Queue(s) */
phba->sli4_hba.fp_eq = kzalloc((sizeof(struct lpfc_queue *) *
phba->cfg_fcp_eq_count), GFP_KERNEL);
if (!phba->sli4_hba.fp_eq) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2576 Failed allocate memory for fast-path "
"EQ record array\n");
goto out_free_sp_eq;
}
for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++) {
qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.eq_esize,
phba->sli4_hba.eq_ecount);
if (!qdesc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0497 Failed allocate fast-path EQ\n");
goto out_free_fp_eq;
}
phba->sli4_hba.fp_eq[fcp_eqidx] = qdesc;
}
/*
* Create Complete Queues (CQs)
*/
/* Get CQ depth from module parameter, fake the default for now */
phba->sli4_hba.cq_esize = LPFC_CQE_SIZE;
phba->sli4_hba.cq_ecount = LPFC_CQE_DEF_COUNT;
/* Create slow-path Mailbox Command Complete Queue */
qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
phba->sli4_hba.cq_ecount);
if (!qdesc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0500 Failed allocate slow-path mailbox CQ\n");
goto out_free_fp_eq;
}
phba->sli4_hba.mbx_cq = qdesc;
/* Create slow-path ELS Complete Queue */
qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
phba->sli4_hba.cq_ecount);
if (!qdesc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0501 Failed allocate slow-path ELS CQ\n");
goto out_free_mbx_cq;
}
phba->sli4_hba.els_cq = qdesc;
/* Create fast-path FCP Completion Queue(s), one-to-one with EQs */
phba->sli4_hba.fcp_cq = kzalloc((sizeof(struct lpfc_queue *) *
phba->cfg_fcp_eq_count), GFP_KERNEL);
if (!phba->sli4_hba.fcp_cq) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2577 Failed allocate memory for fast-path "
"CQ record array\n");
goto out_free_els_cq;
}
for (fcp_cqidx = 0; fcp_cqidx < phba->cfg_fcp_eq_count; fcp_cqidx++) {
qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
phba->sli4_hba.cq_ecount);
if (!qdesc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0499 Failed allocate fast-path FCP "
"CQ (%d)\n", fcp_cqidx);
goto out_free_fcp_cq;
}
phba->sli4_hba.fcp_cq[fcp_cqidx] = qdesc;
}
/* Create Mailbox Command Queue */
phba->sli4_hba.mq_esize = LPFC_MQE_SIZE;
phba->sli4_hba.mq_ecount = LPFC_MQE_DEF_COUNT;
qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.mq_esize,
phba->sli4_hba.mq_ecount);
if (!qdesc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0505 Failed allocate slow-path MQ\n");
goto out_free_fcp_cq;
}
phba->sli4_hba.mbx_wq = qdesc;
/*
* Create all the Work Queues (WQs)
*/
phba->sli4_hba.wq_esize = LPFC_WQE_SIZE;
phba->sli4_hba.wq_ecount = LPFC_WQE_DEF_COUNT;
/* Create slow-path ELS Work Queue */
qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.wq_esize,
phba->sli4_hba.wq_ecount);
if (!qdesc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0504 Failed allocate slow-path ELS WQ\n");
goto out_free_mbx_wq;
}
phba->sli4_hba.els_wq = qdesc;
/* Create fast-path FCP Work Queue(s) */
phba->sli4_hba.fcp_wq = kzalloc((sizeof(struct lpfc_queue *) *
phba->cfg_fcp_wq_count), GFP_KERNEL);
if (!phba->sli4_hba.fcp_wq) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2578 Failed allocate memory for fast-path "
"WQ record array\n");
goto out_free_els_wq;
}
for (fcp_wqidx = 0; fcp_wqidx < phba->cfg_fcp_wq_count; fcp_wqidx++) {
qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.wq_esize,
phba->sli4_hba.wq_ecount);
if (!qdesc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0503 Failed allocate fast-path FCP "
"WQ (%d)\n", fcp_wqidx);
goto out_free_fcp_wq;
}
phba->sli4_hba.fcp_wq[fcp_wqidx] = qdesc;
}
/*
* Create Receive Queue (RQ)
*/
phba->sli4_hba.rq_esize = LPFC_RQE_SIZE;
phba->sli4_hba.rq_ecount = LPFC_RQE_DEF_COUNT;
/* Create Receive Queue for header */
qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.rq_esize,
phba->sli4_hba.rq_ecount);
if (!qdesc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0506 Failed allocate receive HRQ\n");
goto out_free_fcp_wq;
}
phba->sli4_hba.hdr_rq = qdesc;
/* Create Receive Queue for data */
qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.rq_esize,
phba->sli4_hba.rq_ecount);
if (!qdesc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0507 Failed allocate receive DRQ\n");
goto out_free_hdr_rq;
}
phba->sli4_hba.dat_rq = qdesc;
return 0;
out_free_hdr_rq:
lpfc_sli4_queue_free(phba->sli4_hba.hdr_rq);
phba->sli4_hba.hdr_rq = NULL;
out_free_fcp_wq:
for (--fcp_wqidx; fcp_wqidx >= 0; fcp_wqidx--) {
lpfc_sli4_queue_free(phba->sli4_hba.fcp_wq[fcp_wqidx]);
phba->sli4_hba.fcp_wq[fcp_wqidx] = NULL;
}
kfree(phba->sli4_hba.fcp_wq);
out_free_els_wq:
lpfc_sli4_queue_free(phba->sli4_hba.els_wq);
phba->sli4_hba.els_wq = NULL;
out_free_mbx_wq:
lpfc_sli4_queue_free(phba->sli4_hba.mbx_wq);
phba->sli4_hba.mbx_wq = NULL;
out_free_fcp_cq:
for (--fcp_cqidx; fcp_cqidx >= 0; fcp_cqidx--) {
lpfc_sli4_queue_free(phba->sli4_hba.fcp_cq[fcp_cqidx]);
phba->sli4_hba.fcp_cq[fcp_cqidx] = NULL;
}
kfree(phba->sli4_hba.fcp_cq);
out_free_els_cq:
lpfc_sli4_queue_free(phba->sli4_hba.els_cq);
phba->sli4_hba.els_cq = NULL;
out_free_mbx_cq:
lpfc_sli4_queue_free(phba->sli4_hba.mbx_cq);
phba->sli4_hba.mbx_cq = NULL;
out_free_fp_eq:
for (--fcp_eqidx; fcp_eqidx >= 0; fcp_eqidx--) {
lpfc_sli4_queue_free(phba->sli4_hba.fp_eq[fcp_eqidx]);
phba->sli4_hba.fp_eq[fcp_eqidx] = NULL;
}
kfree(phba->sli4_hba.fp_eq);
out_free_sp_eq:
lpfc_sli4_queue_free(phba->sli4_hba.sp_eq);
phba->sli4_hba.sp_eq = NULL;
out_error:
return -ENOMEM;
}
/**
* lpfc_sli4_queue_destroy - Destroy all the SLI4 queues
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to release all the SLI4 queues with the FCoE HBA
* operation.
*
* Return codes
* 0 - sucessful
* ENOMEM - No availble memory
* EIO - The mailbox failed to complete successfully.
**/
static void
lpfc_sli4_queue_destroy(struct lpfc_hba *phba)
{
int fcp_qidx;
/* Release mailbox command work queue */
lpfc_sli4_queue_free(phba->sli4_hba.mbx_wq);
phba->sli4_hba.mbx_wq = NULL;
/* Release ELS work queue */
lpfc_sli4_queue_free(phba->sli4_hba.els_wq);
phba->sli4_hba.els_wq = NULL;
/* Release FCP work queue */
for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_wq_count; fcp_qidx++)
lpfc_sli4_queue_free(phba->sli4_hba.fcp_wq[fcp_qidx]);
kfree(phba->sli4_hba.fcp_wq);
phba->sli4_hba.fcp_wq = NULL;
/* Release unsolicited receive queue */
lpfc_sli4_queue_free(phba->sli4_hba.hdr_rq);
phba->sli4_hba.hdr_rq = NULL;
lpfc_sli4_queue_free(phba->sli4_hba.dat_rq);
phba->sli4_hba.dat_rq = NULL;
/* Release ELS complete queue */
lpfc_sli4_queue_free(phba->sli4_hba.els_cq);
phba->sli4_hba.els_cq = NULL;
/* Release mailbox command complete queue */
lpfc_sli4_queue_free(phba->sli4_hba.mbx_cq);
phba->sli4_hba.mbx_cq = NULL;
/* Release FCP response complete queue */
for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
lpfc_sli4_queue_free(phba->sli4_hba.fcp_cq[fcp_qidx]);
kfree(phba->sli4_hba.fcp_cq);
phba->sli4_hba.fcp_cq = NULL;
/* Release fast-path event queue */
for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
lpfc_sli4_queue_free(phba->sli4_hba.fp_eq[fcp_qidx]);
kfree(phba->sli4_hba.fp_eq);
phba->sli4_hba.fp_eq = NULL;
/* Release slow-path event queue */
lpfc_sli4_queue_free(phba->sli4_hba.sp_eq);
phba->sli4_hba.sp_eq = NULL;
return;
}
/**
* lpfc_sli4_queue_setup - Set up all the SLI4 queues
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to set up all the SLI4 queues for the FCoE HBA
* operation.
*
* Return codes
* 0 - sucessful
* ENOMEM - No availble memory
* EIO - The mailbox failed to complete successfully.
**/
int
lpfc_sli4_queue_setup(struct lpfc_hba *phba)
{
int rc = -ENOMEM;
int fcp_eqidx, fcp_cqidx, fcp_wqidx;
int fcp_cq_index = 0;
/*
* Set up Event Queues (EQs)
*/
/* Set up slow-path event queue */
if (!phba->sli4_hba.sp_eq) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0520 Slow-path EQ not allocated\n");
goto out_error;
}
rc = lpfc_eq_create(phba, phba->sli4_hba.sp_eq,
LPFC_SP_DEF_IMAX);
if (rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0521 Failed setup of slow-path EQ: "
"rc = 0x%x\n", rc);
goto out_error;
}
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"2583 Slow-path EQ setup: queue-id=%d\n",
phba->sli4_hba.sp_eq->queue_id);
/* Set up fast-path event queue */
for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++) {
if (!phba->sli4_hba.fp_eq[fcp_eqidx]) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0522 Fast-path EQ (%d) not "
"allocated\n", fcp_eqidx);
goto out_destroy_fp_eq;
}
rc = lpfc_eq_create(phba, phba->sli4_hba.fp_eq[fcp_eqidx],
phba->cfg_fcp_imax);
if (rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0523 Failed setup of fast-path EQ "
"(%d), rc = 0x%x\n", fcp_eqidx, rc);
goto out_destroy_fp_eq;
}
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"2584 Fast-path EQ setup: "
"queue[%d]-id=%d\n", fcp_eqidx,
phba->sli4_hba.fp_eq[fcp_eqidx]->queue_id);
}
/*
* Set up Complete Queues (CQs)
*/
/* Set up slow-path MBOX Complete Queue as the first CQ */
if (!phba->sli4_hba.mbx_cq) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0528 Mailbox CQ not allocated\n");
goto out_destroy_fp_eq;
}
rc = lpfc_cq_create(phba, phba->sli4_hba.mbx_cq, phba->sli4_hba.sp_eq,
LPFC_MCQ, LPFC_MBOX);
if (rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0529 Failed setup of slow-path mailbox CQ: "
"rc = 0x%x\n", rc);
goto out_destroy_fp_eq;
}
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"2585 MBX CQ setup: cq-id=%d, parent eq-id=%d\n",
phba->sli4_hba.mbx_cq->queue_id,
phba->sli4_hba.sp_eq->queue_id);
/* Set up slow-path ELS Complete Queue */
if (!phba->sli4_hba.els_cq) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0530 ELS CQ not allocated\n");
goto out_destroy_mbx_cq;
}
rc = lpfc_cq_create(phba, phba->sli4_hba.els_cq, phba->sli4_hba.sp_eq,
LPFC_WCQ, LPFC_ELS);
if (rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0531 Failed setup of slow-path ELS CQ: "
"rc = 0x%x\n", rc);
goto out_destroy_mbx_cq;
}
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"2586 ELS CQ setup: cq-id=%d, parent eq-id=%d\n",
phba->sli4_hba.els_cq->queue_id,
phba->sli4_hba.sp_eq->queue_id);
/* Set up fast-path FCP Response Complete Queue */
for (fcp_cqidx = 0; fcp_cqidx < phba->cfg_fcp_eq_count; fcp_cqidx++) {
if (!phba->sli4_hba.fcp_cq[fcp_cqidx]) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0526 Fast-path FCP CQ (%d) not "
"allocated\n", fcp_cqidx);
goto out_destroy_fcp_cq;
}
rc = lpfc_cq_create(phba, phba->sli4_hba.fcp_cq[fcp_cqidx],
phba->sli4_hba.fp_eq[fcp_cqidx],
LPFC_WCQ, LPFC_FCP);
if (rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0527 Failed setup of fast-path FCP "
"CQ (%d), rc = 0x%x\n", fcp_cqidx, rc);
goto out_destroy_fcp_cq;
}
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"2588 FCP CQ setup: cq[%d]-id=%d, "
"parent eq[%d]-id=%d\n",
fcp_cqidx,
phba->sli4_hba.fcp_cq[fcp_cqidx]->queue_id,
fcp_cqidx,
phba->sli4_hba.fp_eq[fcp_cqidx]->queue_id);
}
/*
* Set up all the Work Queues (WQs)
*/
/* Set up Mailbox Command Queue */
if (!phba->sli4_hba.mbx_wq) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0538 Slow-path MQ not allocated\n");
goto out_destroy_fcp_cq;
}
rc = lpfc_mq_create(phba, phba->sli4_hba.mbx_wq,
phba->sli4_hba.mbx_cq, LPFC_MBOX);
if (rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0539 Failed setup of slow-path MQ: "
"rc = 0x%x\n", rc);
goto out_destroy_fcp_cq;
}
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"2589 MBX MQ setup: wq-id=%d, parent cq-id=%d\n",
phba->sli4_hba.mbx_wq->queue_id,
phba->sli4_hba.mbx_cq->queue_id);
/* Set up slow-path ELS Work Queue */
if (!phba->sli4_hba.els_wq) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0536 Slow-path ELS WQ not allocated\n");
goto out_destroy_mbx_wq;
}
rc = lpfc_wq_create(phba, phba->sli4_hba.els_wq,
phba->sli4_hba.els_cq, LPFC_ELS);
if (rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0537 Failed setup of slow-path ELS WQ: "
"rc = 0x%x\n", rc);
goto out_destroy_mbx_wq;
}
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"2590 ELS WQ setup: wq-id=%d, parent cq-id=%d\n",
phba->sli4_hba.els_wq->queue_id,
phba->sli4_hba.els_cq->queue_id);
/* Set up fast-path FCP Work Queue */
for (fcp_wqidx = 0; fcp_wqidx < phba->cfg_fcp_wq_count; fcp_wqidx++) {
if (!phba->sli4_hba.fcp_wq[fcp_wqidx]) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0534 Fast-path FCP WQ (%d) not "
"allocated\n", fcp_wqidx);
goto out_destroy_fcp_wq;
}
rc = lpfc_wq_create(phba, phba->sli4_hba.fcp_wq[fcp_wqidx],
phba->sli4_hba.fcp_cq[fcp_cq_index],
LPFC_FCP);
if (rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0535 Failed setup of fast-path FCP "
"WQ (%d), rc = 0x%x\n", fcp_wqidx, rc);
goto out_destroy_fcp_wq;
}
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"2591 FCP WQ setup: wq[%d]-id=%d, "
"parent cq[%d]-id=%d\n",
fcp_wqidx,
phba->sli4_hba.fcp_wq[fcp_wqidx]->queue_id,
fcp_cq_index,
phba->sli4_hba.fcp_cq[fcp_cq_index]->queue_id);
/* Round robin FCP Work Queue's Completion Queue assignment */
fcp_cq_index = ((fcp_cq_index + 1) % phba->cfg_fcp_eq_count);
}
/*
* Create Receive Queue (RQ)
*/
if (!phba->sli4_hba.hdr_rq || !phba->sli4_hba.dat_rq) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0540 Receive Queue not allocated\n");
goto out_destroy_fcp_wq;
}
rc = lpfc_rq_create(phba, phba->sli4_hba.hdr_rq, phba->sli4_hba.dat_rq,
phba->sli4_hba.els_cq, LPFC_USOL);
if (rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0541 Failed setup of Receive Queue: "
"rc = 0x%x\n", rc);
goto out_destroy_fcp_wq;
}
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"2592 USL RQ setup: hdr-rq-id=%d, dat-rq-id=%d "
"parent cq-id=%d\n",
phba->sli4_hba.hdr_rq->queue_id,
phba->sli4_hba.dat_rq->queue_id,
phba->sli4_hba.els_cq->queue_id);
return 0;
out_destroy_fcp_wq:
for (--fcp_wqidx; fcp_wqidx >= 0; fcp_wqidx--)
lpfc_wq_destroy(phba, phba->sli4_hba.fcp_wq[fcp_wqidx]);
lpfc_wq_destroy(phba, phba->sli4_hba.els_wq);
out_destroy_mbx_wq:
lpfc_mq_destroy(phba, phba->sli4_hba.mbx_wq);
out_destroy_fcp_cq:
for (--fcp_cqidx; fcp_cqidx >= 0; fcp_cqidx--)
lpfc_cq_destroy(phba, phba->sli4_hba.fcp_cq[fcp_cqidx]);
lpfc_cq_destroy(phba, phba->sli4_hba.els_cq);
out_destroy_mbx_cq:
lpfc_cq_destroy(phba, phba->sli4_hba.mbx_cq);
out_destroy_fp_eq:
for (--fcp_eqidx; fcp_eqidx >= 0; fcp_eqidx--)
lpfc_eq_destroy(phba, phba->sli4_hba.fp_eq[fcp_eqidx]);
lpfc_eq_destroy(phba, phba->sli4_hba.sp_eq);
out_error:
return rc;
}
/**
* lpfc_sli4_queue_unset - Unset all the SLI4 queues
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to unset all the SLI4 queues with the FCoE HBA
* operation.
*
* Return codes
* 0 - sucessful
* ENOMEM - No availble memory
* EIO - The mailbox failed to complete successfully.
**/
void
lpfc_sli4_queue_unset(struct lpfc_hba *phba)
{
int fcp_qidx;
/* Unset mailbox command work queue */
lpfc_mq_destroy(phba, phba->sli4_hba.mbx_wq);
/* Unset ELS work queue */
lpfc_wq_destroy(phba, phba->sli4_hba.els_wq);
/* Unset unsolicited receive queue */
lpfc_rq_destroy(phba, phba->sli4_hba.hdr_rq, phba->sli4_hba.dat_rq);
/* Unset FCP work queue */
for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_wq_count; fcp_qidx++)
lpfc_wq_destroy(phba, phba->sli4_hba.fcp_wq[fcp_qidx]);
/* Unset mailbox command complete queue */
lpfc_cq_destroy(phba, phba->sli4_hba.mbx_cq);
/* Unset ELS complete queue */
lpfc_cq_destroy(phba, phba->sli4_hba.els_cq);
/* Unset FCP response complete queue */
for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
lpfc_cq_destroy(phba, phba->sli4_hba.fcp_cq[fcp_qidx]);
/* Unset fast-path event queue */
for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
lpfc_eq_destroy(phba, phba->sli4_hba.fp_eq[fcp_qidx]);
/* Unset slow-path event queue */
lpfc_eq_destroy(phba, phba->sli4_hba.sp_eq);
}
/**
* lpfc_sli4_cq_event_pool_create - Create completion-queue event free pool
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to allocate and set up a pool of completion queue
* events. The body of the completion queue event is a completion queue entry
* CQE. For now, this pool is used for the interrupt service routine to queue
* the following HBA completion queue events for the worker thread to process:
* - Mailbox asynchronous events
* - Receive queue completion unsolicited events
* Later, this can be used for all the slow-path events.
*
* Return codes
* 0 - sucessful
* -ENOMEM - No availble memory
**/
static int
lpfc_sli4_cq_event_pool_create(struct lpfc_hba *phba)
{
struct lpfc_cq_event *cq_event;
int i;
for (i = 0; i < (4 * phba->sli4_hba.cq_ecount); i++) {
cq_event = kmalloc(sizeof(struct lpfc_cq_event), GFP_KERNEL);
if (!cq_event)
goto out_pool_create_fail;
list_add_tail(&cq_event->list,
&phba->sli4_hba.sp_cqe_event_pool);
}
return 0;
out_pool_create_fail:
lpfc_sli4_cq_event_pool_destroy(phba);
return -ENOMEM;
}
/**
* lpfc_sli4_cq_event_pool_destroy - Free completion-queue event free pool
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to free the pool of completion queue events at
* driver unload time. Note that, it is the responsibility of the driver
* cleanup routine to free all the outstanding completion-queue events
* allocated from this pool back into the pool before invoking this routine
* to destroy the pool.
**/
static void
lpfc_sli4_cq_event_pool_destroy(struct lpfc_hba *phba)
{
struct lpfc_cq_event *cq_event, *next_cq_event;
list_for_each_entry_safe(cq_event, next_cq_event,
&phba->sli4_hba.sp_cqe_event_pool, list) {
list_del(&cq_event->list);
kfree(cq_event);
}
}
/**
* __lpfc_sli4_cq_event_alloc - Allocate a completion-queue event from free pool
* @phba: pointer to lpfc hba data structure.
*
* This routine is the lock free version of the API invoked to allocate a
* completion-queue event from the free pool.
*
* Return: Pointer to the newly allocated completion-queue event if successful
* NULL otherwise.
**/
struct lpfc_cq_event *
__lpfc_sli4_cq_event_alloc(struct lpfc_hba *phba)
{
struct lpfc_cq_event *cq_event = NULL;
list_remove_head(&phba->sli4_hba.sp_cqe_event_pool, cq_event,
struct lpfc_cq_event, list);
return cq_event;
}
/**
* lpfc_sli4_cq_event_alloc - Allocate a completion-queue event from free pool
* @phba: pointer to lpfc hba data structure.
*
* This routine is the lock version of the API invoked to allocate a
* completion-queue event from the free pool.
*
* Return: Pointer to the newly allocated completion-queue event if successful
* NULL otherwise.
**/
struct lpfc_cq_event *
lpfc_sli4_cq_event_alloc(struct lpfc_hba *phba)
{
struct lpfc_cq_event *cq_event;
unsigned long iflags;
spin_lock_irqsave(&phba->hbalock, iflags);
cq_event = __lpfc_sli4_cq_event_alloc(phba);
spin_unlock_irqrestore(&phba->hbalock, iflags);
return cq_event;
}
/**
* __lpfc_sli4_cq_event_release - Release a completion-queue event to free pool
* @phba: pointer to lpfc hba data structure.
* @cq_event: pointer to the completion queue event to be freed.
*
* This routine is the lock free version of the API invoked to release a
* completion-queue event back into the free pool.
**/
void
__lpfc_sli4_cq_event_release(struct lpfc_hba *phba,
struct lpfc_cq_event *cq_event)
{
list_add_tail(&cq_event->list, &phba->sli4_hba.sp_cqe_event_pool);
}
/**
* lpfc_sli4_cq_event_release - Release a completion-queue event to free pool
* @phba: pointer to lpfc hba data structure.
* @cq_event: pointer to the completion queue event to be freed.
*
* This routine is the lock version of the API invoked to release a
* completion-queue event back into the free pool.
**/
void
lpfc_sli4_cq_event_release(struct lpfc_hba *phba,
struct lpfc_cq_event *cq_event)
{
unsigned long iflags;
spin_lock_irqsave(&phba->hbalock, iflags);
__lpfc_sli4_cq_event_release(phba, cq_event);
spin_unlock_irqrestore(&phba->hbalock, iflags);
}
/**
* lpfc_sli4_cq_event_release_all - Release all cq events to the free pool
* @phba: pointer to lpfc hba data structure.
*
* This routine is to free all the pending completion-queue events to the
* back into the free pool for device reset.
**/
static void
lpfc_sli4_cq_event_release_all(struct lpfc_hba *phba)
{
LIST_HEAD(cqelist);
struct lpfc_cq_event *cqe;
unsigned long iflags;
/* Retrieve all the pending WCQEs from pending WCQE lists */
spin_lock_irqsave(&phba->hbalock, iflags);
/* Pending FCP XRI abort events */
list_splice_init(&phba->sli4_hba.sp_fcp_xri_aborted_work_queue,
&cqelist);
/* Pending ELS XRI abort events */
list_splice_init(&phba->sli4_hba.sp_els_xri_aborted_work_queue,
&cqelist);
/* Pending asynnc events */
list_splice_init(&phba->sli4_hba.sp_asynce_work_queue,
&cqelist);
spin_unlock_irqrestore(&phba->hbalock, iflags);
while (!list_empty(&cqelist)) {
list_remove_head(&cqelist, cqe, struct lpfc_cq_event, list);
lpfc_sli4_cq_event_release(phba, cqe);
}
}
/**
* lpfc_pci_function_reset - Reset pci function.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to request a PCI function reset. It will destroys
* all resources assigned to the PCI function which originates this request.
*
* Return codes
* 0 - sucessful
* ENOMEM - No availble memory
* EIO - The mailbox failed to complete successfully.
**/
int
lpfc_pci_function_reset(struct lpfc_hba *phba)
{
LPFC_MBOXQ_t *mboxq;
uint32_t rc = 0;
uint32_t shdr_status, shdr_add_status;
union lpfc_sli4_cfg_shdr *shdr;
mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mboxq) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0494 Unable to allocate memory for issuing "
"SLI_FUNCTION_RESET mailbox command\n");
return -ENOMEM;
}
/* Set up PCI function reset SLI4_CONFIG mailbox-ioctl command */
lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
LPFC_MBOX_OPCODE_FUNCTION_RESET, 0,
LPFC_SLI4_MBX_EMBED);
rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
shdr = (union lpfc_sli4_cfg_shdr *)
&mboxq->u.mqe.un.sli4_config.header.cfg_shdr;
shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
if (rc != MBX_TIMEOUT)
mempool_free(mboxq, phba->mbox_mem_pool);
if (shdr_status || shdr_add_status || rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0495 SLI_FUNCTION_RESET mailbox failed with "
"status x%x add_status x%x, mbx status x%x\n",
shdr_status, shdr_add_status, rc);
rc = -ENXIO;
}
return rc;
}
/**
* lpfc_sli4_send_nop_mbox_cmds - Send sli-4 nop mailbox commands
* @phba: pointer to lpfc hba data structure.
* @cnt: number of nop mailbox commands to send.
*
* This routine is invoked to send a number @cnt of NOP mailbox command and
* wait for each command to complete.
*
* Return: the number of NOP mailbox command completed.
**/
static int
lpfc_sli4_send_nop_mbox_cmds(struct lpfc_hba *phba, uint32_t cnt)
{
LPFC_MBOXQ_t *mboxq;
int length, cmdsent;
uint32_t mbox_tmo;
uint32_t rc = 0;
uint32_t shdr_status, shdr_add_status;
union lpfc_sli4_cfg_shdr *shdr;
if (cnt == 0) {
lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
"2518 Requested to send 0 NOP mailbox cmd\n");
return cnt;
}
mboxq = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mboxq) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2519 Unable to allocate memory for issuing "
"NOP mailbox command\n");
return 0;
}
/* Set up NOP SLI4_CONFIG mailbox-ioctl command */
length = (sizeof(struct lpfc_mbx_nop) -
sizeof(struct lpfc_sli4_cfg_mhdr));
lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
LPFC_MBOX_OPCODE_NOP, length, LPFC_SLI4_MBX_EMBED);
mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
for (cmdsent = 0; cmdsent < cnt; cmdsent++) {
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
else
rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
if (rc == MBX_TIMEOUT)
break;
/* Check return status */
shdr = (union lpfc_sli4_cfg_shdr *)
&mboxq->u.mqe.un.sli4_config.header.cfg_shdr;
shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
&shdr->response);
if (shdr_status || shdr_add_status || rc) {
lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
"2520 NOP mailbox command failed "
"status x%x add_status x%x mbx "
"status x%x\n", shdr_status,
shdr_add_status, rc);
break;
}
}
if (rc != MBX_TIMEOUT)
mempool_free(mboxq, phba->mbox_mem_pool);
return cmdsent;
}
/**
* lpfc_sli4_fcfi_unreg - Unregister fcfi to device
* @phba: pointer to lpfc hba data structure.
* @fcfi: fcf index.
*
* This routine is invoked to unregister a FCFI from device.
**/
void
lpfc_sli4_fcfi_unreg(struct lpfc_hba *phba, uint16_t fcfi)
{
LPFC_MBOXQ_t *mbox;
uint32_t mbox_tmo;
int rc;
unsigned long flags;
mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mbox)
return;
lpfc_unreg_fcfi(mbox, fcfi);
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
else {
mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
}
if (rc != MBX_TIMEOUT)
mempool_free(mbox, phba->mbox_mem_pool);
if (rc != MBX_SUCCESS)
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"2517 Unregister FCFI command failed "
"status %d, mbxStatus x%x\n", rc,
bf_get(lpfc_mqe_status, &mbox->u.mqe));
else {
spin_lock_irqsave(&phba->hbalock, flags);
/* Mark the FCFI is no longer registered */
phba->fcf.fcf_flag &=
~(FCF_AVAILABLE | FCF_REGISTERED | FCF_DISCOVERED);
spin_unlock_irqrestore(&phba->hbalock, flags);
}
}
/**
* lpfc_sli4_pci_mem_setup - Setup SLI4 HBA PCI memory space.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to set up the PCI device memory space for device
* with SLI-4 interface spec.
*
* Return codes
* 0 - sucessful
* other values - error
**/
static int
lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
{
struct pci_dev *pdev;
unsigned long bar0map_len, bar1map_len, bar2map_len;
int error = -ENODEV;
/* Obtain PCI device reference */
if (!phba->pcidev)
return error;
else
pdev = phba->pcidev;
/* Set the device DMA mask size */
if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)
if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)
return error;
/* Get the bus address of SLI4 device Bar0, Bar1, and Bar2 and the
* number of bytes required by each mapping. They are actually
* mapping to the PCI BAR regions 1, 2, and 4 by the SLI4 device.
*/
phba->pci_bar0_map = pci_resource_start(pdev, LPFC_SLI4_BAR0);
bar0map_len = pci_resource_len(pdev, LPFC_SLI4_BAR0);
phba->pci_bar1_map = pci_resource_start(pdev, LPFC_SLI4_BAR1);
bar1map_len = pci_resource_len(pdev, LPFC_SLI4_BAR1);
phba->pci_bar2_map = pci_resource_start(pdev, LPFC_SLI4_BAR2);
bar2map_len = pci_resource_len(pdev, LPFC_SLI4_BAR2);
/* Map SLI4 PCI Config Space Register base to a kernel virtual addr */
phba->sli4_hba.conf_regs_memmap_p =
ioremap(phba->pci_bar0_map, bar0map_len);
if (!phba->sli4_hba.conf_regs_memmap_p) {
dev_printk(KERN_ERR, &pdev->dev,
"ioremap failed for SLI4 PCI config registers.\n");
goto out;
}
/* Map SLI4 HBA Control Register base to a kernel virtual address. */
phba->sli4_hba.ctrl_regs_memmap_p =
ioremap(phba->pci_bar1_map, bar1map_len);
if (!phba->sli4_hba.ctrl_regs_memmap_p) {
dev_printk(KERN_ERR, &pdev->dev,
"ioremap failed for SLI4 HBA control registers.\n");
goto out_iounmap_conf;
}
/* Map SLI4 HBA Doorbell Register base to a kernel virtual address. */
phba->sli4_hba.drbl_regs_memmap_p =
ioremap(phba->pci_bar2_map, bar2map_len);
if (!phba->sli4_hba.drbl_regs_memmap_p) {
dev_printk(KERN_ERR, &pdev->dev,
"ioremap failed for SLI4 HBA doorbell registers.\n");
goto out_iounmap_ctrl;
}
/* Set up BAR0 PCI config space register memory map */
lpfc_sli4_bar0_register_memmap(phba);
/* Set up BAR1 register memory map */
lpfc_sli4_bar1_register_memmap(phba);
/* Set up BAR2 register memory map */
error = lpfc_sli4_bar2_register_memmap(phba, LPFC_VF0);
if (error)
goto out_iounmap_all;
return 0;
out_iounmap_all:
iounmap(phba->sli4_hba.drbl_regs_memmap_p);
out_iounmap_ctrl:
iounmap(phba->sli4_hba.ctrl_regs_memmap_p);
out_iounmap_conf:
iounmap(phba->sli4_hba.conf_regs_memmap_p);
out:
return error;
}
/**
* lpfc_sli4_pci_mem_unset - Unset SLI4 HBA PCI memory space.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to unset the PCI device memory space for device
* with SLI-4 interface spec.
**/
static void
lpfc_sli4_pci_mem_unset(struct lpfc_hba *phba)
{
struct pci_dev *pdev;
/* Obtain PCI device reference */
if (!phba->pcidev)
return;
else
pdev = phba->pcidev;
/* Free coherent DMA memory allocated */
/* Unmap I/O memory space */
iounmap(phba->sli4_hba.drbl_regs_memmap_p);
iounmap(phba->sli4_hba.ctrl_regs_memmap_p);
iounmap(phba->sli4_hba.conf_regs_memmap_p);
return;
}
/**
* lpfc_sli_enable_msix - Enable MSI-X interrupt mode on SLI-3 device
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to enable the MSI-X interrupt vectors to device
* with SLI-3 interface specs. The kernel function pci_enable_msix() is
* called to enable the MSI-X vectors. Note that pci_enable_msix(), once
* invoked, enables either all or nothing, depending on the current
* availability of PCI vector resources. The device driver is responsible
* for calling the individual request_irq() to register each MSI-X vector
* with a interrupt handler, which is done in this function. Note that
* later when device is unloading, the driver should always call free_irq()
* on all MSI-X vectors it has done request_irq() on before calling
* pci_disable_msix(). Failure to do so results in a BUG_ON() and a device
* will be left with MSI-X enabled and leaks its vectors.
*
* Return codes
* 0 - sucessful
* other values - error
**/
static int
lpfc_sli_enable_msix(struct lpfc_hba *phba)
{
int rc, i;
LPFC_MBOXQ_t *pmb;
/* Set up MSI-X multi-message vectors */
for (i = 0; i < LPFC_MSIX_VECTORS; i++)
phba->msix_entries[i].entry = i;
/* Configure MSI-X capability structure */
rc = pci_enable_msix(phba->pcidev, phba->msix_entries,
ARRAY_SIZE(phba->msix_entries));
if (rc) {
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0420 PCI enable MSI-X failed (%d)\n", rc);
goto msi_fail_out;
}
for (i = 0; i < LPFC_MSIX_VECTORS; i++)
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0477 MSI-X entry[%d]: vector=x%x "
"message=%d\n", i,
phba->msix_entries[i].vector,
phba->msix_entries[i].entry);
/*
* Assign MSI-X vectors to interrupt handlers
*/
/* vector-0 is associated to slow-path handler */
rc = request_irq(phba->msix_entries[0].vector,
&lpfc_sli_sp_intr_handler, IRQF_SHARED,
LPFC_SP_DRIVER_HANDLER_NAME, phba);
if (rc) {
lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
"0421 MSI-X slow-path request_irq failed "
"(%d)\n", rc);
goto msi_fail_out;
}
/* vector-1 is associated to fast-path handler */
rc = request_irq(phba->msix_entries[1].vector,
&lpfc_sli_fp_intr_handler, IRQF_SHARED,
LPFC_FP_DRIVER_HANDLER_NAME, phba);
if (rc) {
lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
"0429 MSI-X fast-path request_irq failed "
"(%d)\n", rc);
goto irq_fail_out;
}
/*
* Configure HBA MSI-X attention conditions to messages
*/
pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!pmb) {
rc = -ENOMEM;
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0474 Unable to allocate memory for issuing "
"MBOX_CONFIG_MSI command\n");
goto mem_fail_out;
}
rc = lpfc_config_msi(phba, pmb);
if (rc)
goto mbx_fail_out;
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
if (rc != MBX_SUCCESS) {
lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX,
"0351 Config MSI mailbox command failed, "
"mbxCmd x%x, mbxStatus x%x\n",
pmb->u.mb.mbxCommand, pmb->u.mb.mbxStatus);
goto mbx_fail_out;
}
/* Free memory allocated for mailbox command */
mempool_free(pmb, phba->mbox_mem_pool);
return rc;
mbx_fail_out:
/* Free memory allocated for mailbox command */
mempool_free(pmb, phba->mbox_mem_pool);
mem_fail_out:
/* free the irq already requested */
free_irq(phba->msix_entries[1].vector, phba);
irq_fail_out:
/* free the irq already requested */
free_irq(phba->msix_entries[0].vector, phba);
msi_fail_out:
/* Unconfigure MSI-X capability structure */
pci_disable_msix(phba->pcidev);
return rc;
}
/**
* lpfc_sli_disable_msix - Disable MSI-X interrupt mode on SLI-3 device.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to release the MSI-X vectors and then disable the
* MSI-X interrupt mode to device with SLI-3 interface spec.
**/
static void
lpfc_sli_disable_msix(struct lpfc_hba *phba)
{
int i;
/* Free up MSI-X multi-message vectors */
for (i = 0; i < LPFC_MSIX_VECTORS; i++)
free_irq(phba->msix_entries[i].vector, phba);
/* Disable MSI-X */
pci_disable_msix(phba->pcidev);
return;
}
/**
* lpfc_sli_enable_msi - Enable MSI interrupt mode on SLI-3 device.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to enable the MSI interrupt mode to device with
* SLI-3 interface spec. The kernel function pci_enable_msi() is called to
* enable the MSI vector. The device driver is responsible for calling the
* request_irq() to register MSI vector with a interrupt the handler, which
* is done in this function.
*
* Return codes
* 0 - sucessful
* other values - error
*/
static int
lpfc_sli_enable_msi(struct lpfc_hba *phba)
{
int rc;
rc = pci_enable_msi(phba->pcidev);
if (!rc)
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0462 PCI enable MSI mode success.\n");
else {
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0471 PCI enable MSI mode failed (%d)\n", rc);
return rc;
}
rc = request_irq(phba->pcidev->irq, lpfc_sli_intr_handler,
IRQF_SHARED, LPFC_DRIVER_NAME, phba);
if (rc) {
pci_disable_msi(phba->pcidev);
lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
"0478 MSI request_irq failed (%d)\n", rc);
}
return rc;
}
/**
* lpfc_sli_disable_msi - Disable MSI interrupt mode to SLI-3 device.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to disable the MSI interrupt mode to device with
* SLI-3 interface spec. The driver calls free_irq() on MSI vector it has
* done request_irq() on before calling pci_disable_msi(). Failure to do so
* results in a BUG_ON() and a device will be left with MSI enabled and leaks
* its vector.
*/
static void
lpfc_sli_disable_msi(struct lpfc_hba *phba)
{
free_irq(phba->pcidev->irq, phba);
pci_disable_msi(phba->pcidev);
return;
}
/**
* lpfc_sli_enable_intr - Enable device interrupt to SLI-3 device.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to enable device interrupt and associate driver's
* interrupt handler(s) to interrupt vector(s) to device with SLI-3 interface
* spec. Depends on the interrupt mode configured to the driver, the driver
* will try to fallback from the configured interrupt mode to an interrupt
* mode which is supported by the platform, kernel, and device in the order
* of:
* MSI-X -> MSI -> IRQ.
*
* Return codes
* 0 - sucessful
* other values - error
**/
static uint32_t
lpfc_sli_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
{
uint32_t intr_mode = LPFC_INTR_ERROR;
int retval;
if (cfg_mode == 2) {
/* Need to issue conf_port mbox cmd before conf_msi mbox cmd */
retval = lpfc_sli_config_port(phba, LPFC_SLI_REV3);
if (!retval) {
/* Now, try to enable MSI-X interrupt mode */
retval = lpfc_sli_enable_msix(phba);
if (!retval) {
/* Indicate initialization to MSI-X mode */
phba->intr_type = MSIX;
intr_mode = 2;
}
}
}
/* Fallback to MSI if MSI-X initialization failed */
if (cfg_mode >= 1 && phba->intr_type == NONE) {
retval = lpfc_sli_enable_msi(phba);
if (!retval) {
/* Indicate initialization to MSI mode */
phba->intr_type = MSI;
intr_mode = 1;
}
}
/* Fallback to INTx if both MSI-X/MSI initalization failed */
if (phba->intr_type == NONE) {
retval = request_irq(phba->pcidev->irq, lpfc_sli_intr_handler,
IRQF_SHARED, LPFC_DRIVER_NAME, phba);
if (!retval) {
/* Indicate initialization to INTx mode */
phba->intr_type = INTx;
intr_mode = 0;
}
}
return intr_mode;
}
/**
* lpfc_sli_disable_intr - Disable device interrupt to SLI-3 device.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to disable device interrupt and disassociate the
* driver's interrupt handler(s) from interrupt vector(s) to device with
* SLI-3 interface spec. Depending on the interrupt mode, the driver will
* release the interrupt vector(s) for the message signaled interrupt.
**/
static void
lpfc_sli_disable_intr(struct lpfc_hba *phba)
{
/* Disable the currently initialized interrupt mode */
if (phba->intr_type == MSIX)
lpfc_sli_disable_msix(phba);
else if (phba->intr_type == MSI)
lpfc_sli_disable_msi(phba);
else if (phba->intr_type == INTx)
free_irq(phba->pcidev->irq, phba);
/* Reset interrupt management states */
phba->intr_type = NONE;
phba->sli.slistat.sli_intr = 0;
return;
}
/**
* lpfc_sli4_enable_msix - Enable MSI-X interrupt mode to SLI-4 device
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to enable the MSI-X interrupt vectors to device
* with SLI-4 interface spec. The kernel function pci_enable_msix() is called
* to enable the MSI-X vectors. Note that pci_enable_msix(), once invoked,
* enables either all or nothing, depending on the current availability of
* PCI vector resources. The device driver is responsible for calling the
* individual request_irq() to register each MSI-X vector with a interrupt
* handler, which is done in this function. Note that later when device is
* unloading, the driver should always call free_irq() on all MSI-X vectors
* it has done request_irq() on before calling pci_disable_msix(). Failure
* to do so results in a BUG_ON() and a device will be left with MSI-X
* enabled and leaks its vectors.
*
* Return codes
* 0 - sucessful
* other values - error
**/
static int
lpfc_sli4_enable_msix(struct lpfc_hba *phba)
{
int rc, index;
/* Set up MSI-X multi-message vectors */
for (index = 0; index < phba->sli4_hba.cfg_eqn; index++)
phba->sli4_hba.msix_entries[index].entry = index;
/* Configure MSI-X capability structure */
rc = pci_enable_msix(phba->pcidev, phba->sli4_hba.msix_entries,
phba->sli4_hba.cfg_eqn);
if (rc) {
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0484 PCI enable MSI-X failed (%d)\n", rc);
goto msi_fail_out;
}
/* Log MSI-X vector assignment */
for (index = 0; index < phba->sli4_hba.cfg_eqn; index++)
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0489 MSI-X entry[%d]: vector=x%x "
"message=%d\n", index,
phba->sli4_hba.msix_entries[index].vector,
phba->sli4_hba.msix_entries[index].entry);
/*
* Assign MSI-X vectors to interrupt handlers
*/
/* The first vector must associated to slow-path handler for MQ */
rc = request_irq(phba->sli4_hba.msix_entries[0].vector,
&lpfc_sli4_sp_intr_handler, IRQF_SHARED,
LPFC_SP_DRIVER_HANDLER_NAME, phba);
if (rc) {
lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
"0485 MSI-X slow-path request_irq failed "
"(%d)\n", rc);
goto msi_fail_out;
}
/* The rest of the vector(s) are associated to fast-path handler(s) */
for (index = 1; index < phba->sli4_hba.cfg_eqn; index++) {
phba->sli4_hba.fcp_eq_hdl[index - 1].idx = index - 1;
phba->sli4_hba.fcp_eq_hdl[index - 1].phba = phba;
rc = request_irq(phba->sli4_hba.msix_entries[index].vector,
&lpfc_sli4_fp_intr_handler, IRQF_SHARED,
LPFC_FP_DRIVER_HANDLER_NAME,
&phba->sli4_hba.fcp_eq_hdl[index - 1]);
if (rc) {
lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
"0486 MSI-X fast-path (%d) "
"request_irq failed (%d)\n", index, rc);
goto cfg_fail_out;
}
}
return rc;
cfg_fail_out:
/* free the irq already requested */
for (--index; index >= 1; index--)
free_irq(phba->sli4_hba.msix_entries[index - 1].vector,
&phba->sli4_hba.fcp_eq_hdl[index - 1]);
/* free the irq already requested */
free_irq(phba->sli4_hba.msix_entries[0].vector, phba);
msi_fail_out:
/* Unconfigure MSI-X capability structure */
pci_disable_msix(phba->pcidev);
return rc;
}
/**
* lpfc_sli4_disable_msix - Disable MSI-X interrupt mode to SLI-4 device
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to release the MSI-X vectors and then disable the
* MSI-X interrupt mode to device with SLI-4 interface spec.
**/
static void
lpfc_sli4_disable_msix(struct lpfc_hba *phba)
{
int index;
/* Free up MSI-X multi-message vectors */
free_irq(phba->sli4_hba.msix_entries[0].vector, phba);
for (index = 1; index < phba->sli4_hba.cfg_eqn; index++)
free_irq(phba->sli4_hba.msix_entries[index].vector,
&phba->sli4_hba.fcp_eq_hdl[index - 1]);
/* Disable MSI-X */
pci_disable_msix(phba->pcidev);
return;
}
/**
* lpfc_sli4_enable_msi - Enable MSI interrupt mode to SLI-4 device
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to enable the MSI interrupt mode to device with
* SLI-4 interface spec. The kernel function pci_enable_msi() is called
* to enable the MSI vector. The device driver is responsible for calling
* the request_irq() to register MSI vector with a interrupt the handler,
* which is done in this function.
*
* Return codes
* 0 - sucessful
* other values - error
**/
static int
lpfc_sli4_enable_msi(struct lpfc_hba *phba)
{
int rc, index;
rc = pci_enable_msi(phba->pcidev);
if (!rc)
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0487 PCI enable MSI mode success.\n");
else {
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0488 PCI enable MSI mode failed (%d)\n", rc);
return rc;
}
rc = request_irq(phba->pcidev->irq, lpfc_sli4_intr_handler,
IRQF_SHARED, LPFC_DRIVER_NAME, phba);
if (rc) {
pci_disable_msi(phba->pcidev);
lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
"0490 MSI request_irq failed (%d)\n", rc);
}
for (index = 0; index < phba->cfg_fcp_eq_count; index++) {
phba->sli4_hba.fcp_eq_hdl[index].idx = index;
phba->sli4_hba.fcp_eq_hdl[index].phba = phba;
}
return rc;
}
/**
* lpfc_sli4_disable_msi - Disable MSI interrupt mode to SLI-4 device
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to disable the MSI interrupt mode to device with
* SLI-4 interface spec. The driver calls free_irq() on MSI vector it has
* done request_irq() on before calling pci_disable_msi(). Failure to do so
* results in a BUG_ON() and a device will be left with MSI enabled and leaks
* its vector.
**/
static void
lpfc_sli4_disable_msi(struct lpfc_hba *phba)
{
free_irq(phba->pcidev->irq, phba);
pci_disable_msi(phba->pcidev);
return;
}
/**
* lpfc_sli4_enable_intr - Enable device interrupt to SLI-4 device
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to enable device interrupt and associate driver's
* interrupt handler(s) to interrupt vector(s) to device with SLI-4
* interface spec. Depends on the interrupt mode configured to the driver,
* the driver will try to fallback from the configured interrupt mode to an
* interrupt mode which is supported by the platform, kernel, and device in
* the order of:
* MSI-X -> MSI -> IRQ.
*
* Return codes
* 0 - sucessful
* other values - error
**/
static uint32_t
lpfc_sli4_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
{
uint32_t intr_mode = LPFC_INTR_ERROR;
int retval, index;
if (cfg_mode == 2) {
/* Preparation before conf_msi mbox cmd */
retval = 0;
if (!retval) {
/* Now, try to enable MSI-X interrupt mode */
retval = lpfc_sli4_enable_msix(phba);
if (!retval) {
/* Indicate initialization to MSI-X mode */
phba->intr_type = MSIX;
intr_mode = 2;
}
}
}
/* Fallback to MSI if MSI-X initialization failed */
if (cfg_mode >= 1 && phba->intr_type == NONE) {
retval = lpfc_sli4_enable_msi(phba);
if (!retval) {
/* Indicate initialization to MSI mode */
phba->intr_type = MSI;
intr_mode = 1;
}
}
/* Fallback to INTx if both MSI-X/MSI initalization failed */
if (phba->intr_type == NONE) {
retval = request_irq(phba->pcidev->irq, lpfc_sli4_intr_handler,
IRQF_SHARED, LPFC_DRIVER_NAME, phba);
if (!retval) {
/* Indicate initialization to INTx mode */
phba->intr_type = INTx;
intr_mode = 0;
for (index = 0; index < phba->cfg_fcp_eq_count;
index++) {
phba->sli4_hba.fcp_eq_hdl[index].idx = index;
phba->sli4_hba.fcp_eq_hdl[index].phba = phba;
}
}
}
return intr_mode;
}
/**
* lpfc_sli4_disable_intr - Disable device interrupt to SLI-4 device
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to disable device interrupt and disassociate
* the driver's interrupt handler(s) from interrupt vector(s) to device
* with SLI-4 interface spec. Depending on the interrupt mode, the driver
* will release the interrupt vector(s) for the message signaled interrupt.
**/
static void
lpfc_sli4_disable_intr(struct lpfc_hba *phba)
{
/* Disable the currently initialized interrupt mode */
if (phba->intr_type == MSIX)
lpfc_sli4_disable_msix(phba);
else if (phba->intr_type == MSI)
lpfc_sli4_disable_msi(phba);
else if (phba->intr_type == INTx)
free_irq(phba->pcidev->irq, phba);
/* Reset interrupt management states */
phba->intr_type = NONE;
phba->sli.slistat.sli_intr = 0;
return;
}
/**
* lpfc_unset_hba - Unset SLI3 hba device initialization
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to unset the HBA device initialization steps to
* a device with SLI-3 interface spec.
**/
static void
lpfc_unset_hba(struct lpfc_hba *phba)
{
struct lpfc_vport *vport = phba->pport;
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
spin_lock_irq(shost->host_lock);
vport->load_flag |= FC_UNLOADING;
spin_unlock_irq(shost->host_lock);
lpfc_stop_hba_timers(phba);
phba->pport->work_port_events = 0;
lpfc_sli_hba_down(phba);
lpfc_sli_brdrestart(phba);
lpfc_sli_disable_intr(phba);
return;
}
/**
* lpfc_sli4_unset_hba - Unset SLI4 hba device initialization.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to unset the HBA device initialization steps to
* a device with SLI-4 interface spec.
**/
static void
lpfc_sli4_unset_hba(struct lpfc_hba *phba)
{
struct lpfc_vport *vport = phba->pport;
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
spin_lock_irq(shost->host_lock);
vport->load_flag |= FC_UNLOADING;
spin_unlock_irq(shost->host_lock);
phba->pport->work_port_events = 0;
lpfc_sli4_hba_down(phba);
lpfc_sli4_disable_intr(phba);
return;
}
/**
* lpfc_sli4_hba_unset - Unset the fcoe hba
* @phba: Pointer to HBA context object.
*
* This function is called in the SLI4 code path to reset the HBA's FCoE
* function. The caller is not required to hold any lock. This routine
* issues PCI function reset mailbox command to reset the FCoE function.
* At the end of the function, it calls lpfc_hba_down_post function to
* free any pending commands.
**/
static void
lpfc_sli4_hba_unset(struct lpfc_hba *phba)
{
int wait_cnt = 0;
LPFC_MBOXQ_t *mboxq;
lpfc_stop_hba_timers(phba);
phba->sli4_hba.intr_enable = 0;
/*
* Gracefully wait out the potential current outstanding asynchronous
* mailbox command.
*/
/* First, block any pending async mailbox command from posted */
spin_lock_irq(&phba->hbalock);
phba->sli.sli_flag |= LPFC_SLI_ASYNC_MBX_BLK;
spin_unlock_irq(&phba->hbalock);
/* Now, trying to wait it out if we can */
while (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) {
msleep(10);
if (++wait_cnt > LPFC_ACTIVE_MBOX_WAIT_CNT)
break;
}
/* Forcefully release the outstanding mailbox command if timed out */
if (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) {
spin_lock_irq(&phba->hbalock);
mboxq = phba->sli.mbox_active;
mboxq->u.mb.mbxStatus = MBX_NOT_FINISHED;
__lpfc_mbox_cmpl_put(phba, mboxq);
phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
phba->sli.mbox_active = NULL;
spin_unlock_irq(&phba->hbalock);
}
/* Tear down the queues in the HBA */
lpfc_sli4_queue_unset(phba);
/* Disable PCI subsystem interrupt */
lpfc_sli4_disable_intr(phba);
/* Stop kthread signal shall trigger work_done one more time */
kthread_stop(phba->worker_thread);
/* Stop the SLI4 device port */
phba->pport->work_port_events = 0;
}
/**
* lpfc_pci_probe_one_s3 - PCI probe func to reg SLI-3 device to PCI subsystem.
* @pdev: pointer to PCI device
* @pid: pointer to PCI device identifier
*
* This routine is to be called to attach a device with SLI-3 interface spec
* to the PCI subsystem. When an Emulex HBA with SLI-3 interface spec is
* presented on PCI bus, the kernel PCI subsystem looks at PCI device-specific
* information of the device and driver to see if the driver state that it can
* support this kind of device. If the match is successful, the driver core
* invokes this routine. If this routine determines it can claim the HBA, it
* does all the initialization that it needs to do to handle the HBA properly.
*
* Return code
* 0 - driver can claim the device
* negative value - driver can not claim the device
**/
static int __devinit
lpfc_pci_probe_one_s3(struct pci_dev *pdev, const struct pci_device_id *pid)
{
struct lpfc_hba *phba;
struct lpfc_vport *vport = NULL;
struct Scsi_Host *shost = NULL;
int error;
uint32_t cfg_mode, intr_mode;
/* Allocate memory for HBA structure */
phba = lpfc_hba_alloc(pdev);
if (!phba)
return -ENOMEM;
/* Perform generic PCI device enabling operation */
error = lpfc_enable_pci_dev(phba);
if (error) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1401 Failed to enable pci device.\n");
goto out_free_phba;
}
/* Set up SLI API function jump table for PCI-device group-0 HBAs */
error = lpfc_api_table_setup(phba, LPFC_PCI_DEV_LP);
if (error)
goto out_disable_pci_dev;
/* Set up SLI-3 specific device PCI memory space */
error = lpfc_sli_pci_mem_setup(phba);
if (error) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1402 Failed to set up pci memory space.\n");
goto out_disable_pci_dev;
}
/* Set up phase-1 common device driver resources */
error = lpfc_setup_driver_resource_phase1(phba);
if (error) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1403 Failed to set up driver resource.\n");
goto out_unset_pci_mem_s3;
}
/* Set up SLI-3 specific device driver resources */
error = lpfc_sli_driver_resource_setup(phba);
if (error) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1404 Failed to set up driver resource.\n");
goto out_unset_pci_mem_s3;
}
/* Initialize and populate the iocb list per host */
error = lpfc_init_iocb_list(phba, LPFC_IOCB_LIST_CNT);
if (error) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1405 Failed to initialize iocb list.\n");
goto out_unset_driver_resource_s3;
}
/* Set up common device driver resources */
error = lpfc_setup_driver_resource_phase2(phba);
if (error) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1406 Failed to set up driver resource.\n");
goto out_free_iocb_list;
}
/* Create SCSI host to the physical port */
error = lpfc_create_shost(phba);
if (error) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1407 Failed to create scsi host.\n");
goto out_unset_driver_resource;
}
/* Configure sysfs attributes */
vport = phba->pport;
error = lpfc_alloc_sysfs_attr(vport);
if (error) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1476 Failed to allocate sysfs attr\n");
goto out_destroy_shost;
}
shost = lpfc_shost_from_vport(vport); /* save shost for error cleanup */
/* Now, trying to enable interrupt and bring up the device */
cfg_mode = phba->cfg_use_msi;
while (true) {
/* Put device to a known state before enabling interrupt */
lpfc_stop_port(phba);
/* Configure and enable interrupt */
intr_mode = lpfc_sli_enable_intr(phba, cfg_mode);
if (intr_mode == LPFC_INTR_ERROR) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0431 Failed to enable interrupt.\n");
error = -ENODEV;
goto out_free_sysfs_attr;
}
/* SLI-3 HBA setup */
if (lpfc_sli_hba_setup(phba)) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1477 Failed to set up hba\n");
error = -ENODEV;
goto out_remove_device;
}
/* Wait 50ms for the interrupts of previous mailbox commands */
msleep(50);
/* Check active interrupts on message signaled interrupts */
if (intr_mode == 0 ||
phba->sli.slistat.sli_intr > LPFC_MSIX_VECTORS) {
/* Log the current active interrupt mode */
phba->intr_mode = intr_mode;
lpfc_log_intr_mode(phba, intr_mode);
break;
} else {
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0447 Configure interrupt mode (%d) "
"failed active interrupt test.\n",
intr_mode);
/* Disable the current interrupt mode */
lpfc_sli_disable_intr(phba);
/* Try next level of interrupt mode */
cfg_mode = --intr_mode;
}
}
/* Perform post initialization setup */
lpfc_post_init_setup(phba);
/* Check if there are static vports to be created. */
lpfc_create_static_vport(phba);
return 0;
out_remove_device:
lpfc_unset_hba(phba);
out_free_sysfs_attr:
lpfc_free_sysfs_attr(vport);
out_destroy_shost:
lpfc_destroy_shost(phba);
out_unset_driver_resource:
lpfc_unset_driver_resource_phase2(phba);
out_free_iocb_list:
lpfc_free_iocb_list(phba);
out_unset_driver_resource_s3:
lpfc_sli_driver_resource_unset(phba);
out_unset_pci_mem_s3:
lpfc_sli_pci_mem_unset(phba);
out_disable_pci_dev:
lpfc_disable_pci_dev(phba);
if (shost)
scsi_host_put(shost);
out_free_phba:
lpfc_hba_free(phba);
return error;
}
/**
* lpfc_pci_remove_one_s3 - PCI func to unreg SLI-3 device from PCI subsystem.
* @pdev: pointer to PCI device
*
* This routine is to be called to disattach a device with SLI-3 interface
* spec from PCI subsystem. When an Emulex HBA with SLI-3 interface spec is
* removed from PCI bus, it performs all the necessary cleanup for the HBA
* device to be removed from the PCI subsystem properly.
**/
static void __devexit
lpfc_pci_remove_one_s3(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_vport **vports;
struct lpfc_hba *phba = vport->phba;
int i;
int bars = pci_select_bars(pdev, IORESOURCE_MEM);
spin_lock_irq(&phba->hbalock);
vport->load_flag |= FC_UNLOADING;
spin_unlock_irq(&phba->hbalock);
lpfc_free_sysfs_attr(vport);
/* Release all the vports against this physical port */
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
for (i = 1; i <= phba->max_vports && vports[i] != NULL; i++)
fc_vport_terminate(vports[i]->fc_vport);
lpfc_destroy_vport_work_array(phba, vports);
/* Remove FC host and then SCSI host with the physical port */
fc_remove_host(shost);
scsi_remove_host(shost);
lpfc_cleanup(vport);
/*
* Bring down the SLI Layer. This step disable all interrupts,
* clears the rings, discards all mailbox commands, and resets
* the HBA.
*/
/* HBA interrupt will be diabled after this call */
lpfc_sli_hba_down(phba);
/* Stop kthread signal shall trigger work_done one more time */
kthread_stop(phba->worker_thread);
/* Final cleanup of txcmplq and reset the HBA */
lpfc_sli_brdrestart(phba);
lpfc_stop_hba_timers(phba);
spin_lock_irq(&phba->hbalock);
list_del_init(&vport->listentry);
spin_unlock_irq(&phba->hbalock);
lpfc_debugfs_terminate(vport);
/* Disable interrupt */
lpfc_sli_disable_intr(phba);
pci_set_drvdata(pdev, NULL);
scsi_host_put(shost);
/*
* Call scsi_free before mem_free since scsi bufs are released to their
* corresponding pools here.
*/
lpfc_scsi_free(phba);
lpfc_mem_free_all(phba);
dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(),
phba->hbqslimp.virt, phba->hbqslimp.phys);
/* Free resources associated with SLI2 interface */
dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
phba->slim2p.virt, phba->slim2p.phys);
/* unmap adapter SLIM and Control Registers */
iounmap(phba->ctrl_regs_memmap_p);
iounmap(phba->slim_memmap_p);
lpfc_hba_free(phba);
pci_release_selected_regions(pdev, bars);
pci_disable_device(pdev);
}
/**
* lpfc_pci_suspend_one_s3 - PCI func to suspend SLI-3 device for power mgmnt
* @pdev: pointer to PCI device
* @msg: power management message
*
* This routine is to be called from the kernel's PCI subsystem to support
* system Power Management (PM) to device with SLI-3 interface spec. When
* PM invokes this method, it quiesces the device by stopping the driver's
* worker thread for the device, turning off device's interrupt and DMA,
* and bring the device offline. Note that as the driver implements the
* minimum PM requirements to a power-aware driver's PM support for the
* suspend/resume -- all the possible PM messages (SUSPEND, HIBERNATE, FREEZE)
* to the suspend() method call will be treated as SUSPEND and the driver will
* fully reinitialize its device during resume() method call, the driver will
* set device to PCI_D3hot state in PCI config space instead of setting it
* according to the @msg provided by the PM.
*
* Return code
* 0 - driver suspended the device
* Error otherwise
**/
static int
lpfc_pci_suspend_one_s3(struct pci_dev *pdev, pm_message_t msg)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0473 PCI device Power Management suspend.\n");
/* Bring down the device */
lpfc_offline_prep(phba);
lpfc_offline(phba);
kthread_stop(phba->worker_thread);
/* Disable interrupt from device */
lpfc_sli_disable_intr(phba);
/* Save device state to PCI config space */
pci_save_state(pdev);
pci_set_power_state(pdev, PCI_D3hot);
return 0;
}
/**
* lpfc_pci_resume_one_s3 - PCI func to resume SLI-3 device for power mgmnt
* @pdev: pointer to PCI device
*
* This routine is to be called from the kernel's PCI subsystem to support
* system Power Management (PM) to device with SLI-3 interface spec. When PM
* invokes this method, it restores the device's PCI config space state and
* fully reinitializes the device and brings it online. Note that as the
* driver implements the minimum PM requirements to a power-aware driver's
* PM for suspend/resume -- all the possible PM messages (SUSPEND, HIBERNATE,
* FREEZE) to the suspend() method call will be treated as SUSPEND and the
* driver will fully reinitialize its device during resume() method call,
* the device will be set to PCI_D0 directly in PCI config space before
* restoring the state.
*
* Return code
* 0 - driver suspended the device
* Error otherwise
**/
static int
lpfc_pci_resume_one_s3(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
uint32_t intr_mode;
int error;
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0452 PCI device Power Management resume.\n");
/* Restore device state from PCI config space */
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
if (pdev->is_busmaster)
pci_set_master(pdev);
/* Startup the kernel thread for this host adapter. */
phba->worker_thread = kthread_run(lpfc_do_work, phba,
"lpfc_worker_%d", phba->brd_no);
if (IS_ERR(phba->worker_thread)) {
error = PTR_ERR(phba->worker_thread);
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0434 PM resume failed to start worker "
"thread: error=x%x.\n", error);
return error;
}
/* Configure and enable interrupt */
intr_mode = lpfc_sli_enable_intr(phba, phba->intr_mode);
if (intr_mode == LPFC_INTR_ERROR) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0430 PM resume Failed to enable interrupt\n");
return -EIO;
} else
phba->intr_mode = intr_mode;
/* Restart HBA and bring it online */
lpfc_sli_brdrestart(phba);
lpfc_online(phba);
/* Log the current active interrupt mode */
lpfc_log_intr_mode(phba, phba->intr_mode);
return 0;
}
/**
* lpfc_sli_prep_dev_for_recover - Prepare SLI3 device for pci slot recover
* @phba: pointer to lpfc hba data structure.
*
* This routine is called to prepare the SLI3 device for PCI slot recover. It
* aborts and stops all the on-going I/Os on the pci device.
**/
static void
lpfc_sli_prep_dev_for_recover(struct lpfc_hba *phba)
{
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2723 PCI channel I/O abort preparing for recovery\n");
/* Prepare for bringing HBA offline */
lpfc_offline_prep(phba);
/* Clear sli active flag to prevent sysfs access to HBA */
spin_lock_irq(&phba->hbalock);
phba->sli.sli_flag &= ~LPFC_SLI_ACTIVE;
spin_unlock_irq(&phba->hbalock);
/* Stop and flush all I/Os and bring HBA offline */
lpfc_offline(phba);
}
/**
* lpfc_sli_prep_dev_for_reset - Prepare SLI3 device for pci slot reset
* @phba: pointer to lpfc hba data structure.
*
* This routine is called to prepare the SLI3 device for PCI slot reset. It
* disables the device interrupt and pci device, and aborts the internal FCP
* pending I/Os.
**/
static void
lpfc_sli_prep_dev_for_reset(struct lpfc_hba *phba)
{
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring;
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2710 PCI channel disable preparing for reset\n");
/* Disable interrupt and pci device */
lpfc_sli_disable_intr(phba);
pci_disable_device(phba->pcidev);
/*
* There may be I/Os dropped by the firmware.
* Error iocb (I/O) on txcmplq and let the SCSI layer
* retry it after re-establishing link.
*/
pring = &psli->ring[psli->fcp_ring];
lpfc_sli_abort_iocb_ring(phba, pring);
}
/**
* lpfc_sli_prep_dev_for_perm_failure - Prepare SLI3 dev for pci slot disable
* @phba: pointer to lpfc hba data structure.
*
* This routine is called to prepare the SLI3 device for PCI slot permanently
* disabling. It blocks the SCSI transport layer traffic and flushes the FCP
* pending I/Os.
**/
static void
lpfc_prep_dev_for_perm_failure(struct lpfc_hba *phba)
{
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2711 PCI channel permanent disable for failure\n");
/* Block all SCSI devices' I/Os on the host */
lpfc_scsi_dev_block(phba);
/* Clean up all driver's outstanding SCSI I/Os */
lpfc_sli_flush_fcp_rings(phba);
}
/**
* lpfc_io_error_detected_s3 - Method for handling SLI-3 device PCI I/O error
* @pdev: pointer to PCI device.
* @state: the current PCI connection state.
*
* This routine is called from the PCI subsystem for I/O error handling to
* device with SLI-3 interface spec. This function is called by the PCI
* subsystem after a PCI bus error affecting this device has been detected.
* When this function is invoked, it will need to stop all the I/Os and
* interrupt(s) to the device. Once that is done, it will return
* PCI_ERS_RESULT_NEED_RESET for the PCI subsystem to perform proper recovery
* as desired.
*
* Return codes
* PCI_ERS_RESULT_CAN_RECOVER - can be recovered with reset_link
* PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
* PCI_ERS_RESULT_DISCONNECT - device could not be recovered
**/
static pci_ers_result_t
lpfc_io_error_detected_s3(struct pci_dev *pdev, pci_channel_state_t state)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
switch (state) {
case pci_channel_io_normal:
/* Non-fatal error, prepare for recovery */
lpfc_sli_prep_dev_for_recover(phba);
return PCI_ERS_RESULT_CAN_RECOVER;
case pci_channel_io_frozen:
/* Fatal error, prepare for slot reset */
lpfc_sli_prep_dev_for_reset(phba);
return PCI_ERS_RESULT_NEED_RESET;
case pci_channel_io_perm_failure:
/* Permanent failure, prepare for device down */
lpfc_prep_dev_for_perm_failure(phba);
return PCI_ERS_RESULT_DISCONNECT;
default:
/* Unknown state, prepare and request slot reset */
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0472 Unknown PCI error state: x%x\n", state);
lpfc_sli_prep_dev_for_reset(phba);
return PCI_ERS_RESULT_NEED_RESET;
}
}
/**
* lpfc_io_slot_reset_s3 - Method for restarting PCI SLI-3 device from scratch.
* @pdev: pointer to PCI device.
*
* This routine is called from the PCI subsystem for error handling to
* device with SLI-3 interface spec. This is called after PCI bus has been
* reset to restart the PCI card from scratch, as if from a cold-boot.
* During the PCI subsystem error recovery, after driver returns
* PCI_ERS_RESULT_NEED_RESET, the PCI subsystem will perform proper error
* recovery and then call this routine before calling the .resume method
* to recover the device. This function will initialize the HBA device,
* enable the interrupt, but it will just put the HBA to offline state
* without passing any I/O traffic.
*
* Return codes
* PCI_ERS_RESULT_RECOVERED - the device has been recovered
* PCI_ERS_RESULT_DISCONNECT - device could not be recovered
*/
static pci_ers_result_t
lpfc_io_slot_reset_s3(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
struct lpfc_sli *psli = &phba->sli;
uint32_t intr_mode;
dev_printk(KERN_INFO, &pdev->dev, "recovering from a slot reset.\n");
if (pci_enable_device_mem(pdev)) {
printk(KERN_ERR "lpfc: Cannot re-enable "
"PCI device after reset.\n");
return PCI_ERS_RESULT_DISCONNECT;
}
pci_restore_state(pdev);
if (pdev->is_busmaster)
pci_set_master(pdev);
spin_lock_irq(&phba->hbalock);
psli->sli_flag &= ~LPFC_SLI_ACTIVE;
spin_unlock_irq(&phba->hbalock);
/* Configure and enable interrupt */
intr_mode = lpfc_sli_enable_intr(phba, phba->intr_mode);
if (intr_mode == LPFC_INTR_ERROR) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0427 Cannot re-enable interrupt after "
"slot reset.\n");
return PCI_ERS_RESULT_DISCONNECT;
} else
phba->intr_mode = intr_mode;
/* Take device offline; this will perform cleanup */
lpfc_offline(phba);
lpfc_sli_brdrestart(phba);
/* Log the current active interrupt mode */
lpfc_log_intr_mode(phba, phba->intr_mode);
return PCI_ERS_RESULT_RECOVERED;
}
/**
* lpfc_io_resume_s3 - Method for resuming PCI I/O operation on SLI-3 device.
* @pdev: pointer to PCI device
*
* This routine is called from the PCI subsystem for error handling to device
* with SLI-3 interface spec. It is called when kernel error recovery tells
* the lpfc driver that it is ok to resume normal PCI operation after PCI bus
* error recovery. After this call, traffic can start to flow from this device
* again.
*/
static void
lpfc_io_resume_s3(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
/* Bring the device online */
lpfc_online(phba);
/* Clean up Advanced Error Reporting (AER) if needed */
if (phba->hba_flag & HBA_AER_ENABLED)
pci_cleanup_aer_uncorrect_error_status(pdev);
}
/**
* lpfc_sli4_get_els_iocb_cnt - Calculate the # of ELS IOCBs to reserve
* @phba: pointer to lpfc hba data structure.
*
* returns the number of ELS/CT IOCBs to reserve
**/
int
lpfc_sli4_get_els_iocb_cnt(struct lpfc_hba *phba)
{
int max_xri = phba->sli4_hba.max_cfg_param.max_xri;
if (phba->sli_rev == LPFC_SLI_REV4) {
if (max_xri <= 100)
return 10;
else if (max_xri <= 256)
return 25;
else if (max_xri <= 512)
return 50;
else if (max_xri <= 1024)
return 100;
else
return 150;
} else
return 0;
}
/**
* lpfc_pci_probe_one_s4 - PCI probe func to reg SLI-4 device to PCI subsys
* @pdev: pointer to PCI device
* @pid: pointer to PCI device identifier
*
* This routine is called from the kernel's PCI subsystem to device with
* SLI-4 interface spec. When an Emulex HBA with SLI-4 interface spec is
* presented on PCI bus, the kernel PCI subsystem looks at PCI device-specific
* information of the device and driver to see if the driver state that it
* can support this kind of device. If the match is successful, the driver
* core invokes this routine. If this routine determines it can claim the HBA,
* it does all the initialization that it needs to do to handle the HBA
* properly.
*
* Return code
* 0 - driver can claim the device
* negative value - driver can not claim the device
**/
static int __devinit
lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
{
struct lpfc_hba *phba;
struct lpfc_vport *vport = NULL;
struct Scsi_Host *shost = NULL;
int error;
uint32_t cfg_mode, intr_mode;
int mcnt;
/* Allocate memory for HBA structure */
phba = lpfc_hba_alloc(pdev);
if (!phba)
return -ENOMEM;
/* Perform generic PCI device enabling operation */
error = lpfc_enable_pci_dev(phba);
if (error) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1409 Failed to enable pci device.\n");
goto out_free_phba;
}
/* Set up SLI API function jump table for PCI-device group-1 HBAs */
error = lpfc_api_table_setup(phba, LPFC_PCI_DEV_OC);
if (error)
goto out_disable_pci_dev;
/* Set up SLI-4 specific device PCI memory space */
error = lpfc_sli4_pci_mem_setup(phba);
if (error) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1410 Failed to set up pci memory space.\n");
goto out_disable_pci_dev;
}
/* Set up phase-1 common device driver resources */
error = lpfc_setup_driver_resource_phase1(phba);
if (error) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1411 Failed to set up driver resource.\n");
goto out_unset_pci_mem_s4;
}
/* Set up SLI-4 Specific device driver resources */
error = lpfc_sli4_driver_resource_setup(phba);
if (error) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1412 Failed to set up driver resource.\n");
goto out_unset_pci_mem_s4;
}
/* Initialize and populate the iocb list per host */
error = lpfc_init_iocb_list(phba,
phba->sli4_hba.max_cfg_param.max_xri);
if (error) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1413 Failed to initialize iocb list.\n");
goto out_unset_driver_resource_s4;
}
/* Set up common device driver resources */
error = lpfc_setup_driver_resource_phase2(phba);
if (error) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1414 Failed to set up driver resource.\n");
goto out_free_iocb_list;
}
/* Create SCSI host to the physical port */
error = lpfc_create_shost(phba);
if (error) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1415 Failed to create scsi host.\n");
goto out_unset_driver_resource;
}
/* Configure sysfs attributes */
vport = phba->pport;
error = lpfc_alloc_sysfs_attr(vport);
if (error) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1416 Failed to allocate sysfs attr\n");
goto out_destroy_shost;
}
shost = lpfc_shost_from_vport(vport); /* save shost for error cleanup */
/* Now, trying to enable interrupt and bring up the device */
cfg_mode = phba->cfg_use_msi;
while (true) {
/* Put device to a known state before enabling interrupt */
lpfc_stop_port(phba);
/* Configure and enable interrupt */
intr_mode = lpfc_sli4_enable_intr(phba, cfg_mode);
if (intr_mode == LPFC_INTR_ERROR) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0426 Failed to enable interrupt.\n");
error = -ENODEV;
goto out_free_sysfs_attr;
}
/* Set up SLI-4 HBA */
if (lpfc_sli4_hba_setup(phba)) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1421 Failed to set up hba\n");
error = -ENODEV;
goto out_disable_intr;
}
/* Send NOP mbx cmds for non-INTx mode active interrupt test */
if (intr_mode != 0)
mcnt = lpfc_sli4_send_nop_mbox_cmds(phba,
LPFC_ACT_INTR_CNT);
/* Check active interrupts received only for MSI/MSI-X */
if (intr_mode == 0 ||
phba->sli.slistat.sli_intr >= LPFC_ACT_INTR_CNT) {
/* Log the current active interrupt mode */
phba->intr_mode = intr_mode;
lpfc_log_intr_mode(phba, intr_mode);
break;
}
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0451 Configure interrupt mode (%d) "
"failed active interrupt test.\n",
intr_mode);
/* Unset the preivous SLI-4 HBA setup */
lpfc_sli4_unset_hba(phba);
/* Try next level of interrupt mode */
cfg_mode = --intr_mode;
}
/* Perform post initialization setup */
lpfc_post_init_setup(phba);
/* Check if there are static vports to be created. */
lpfc_create_static_vport(phba);
return 0;
out_disable_intr:
lpfc_sli4_disable_intr(phba);
out_free_sysfs_attr:
lpfc_free_sysfs_attr(vport);
out_destroy_shost:
lpfc_destroy_shost(phba);
out_unset_driver_resource:
lpfc_unset_driver_resource_phase2(phba);
out_free_iocb_list:
lpfc_free_iocb_list(phba);
out_unset_driver_resource_s4:
lpfc_sli4_driver_resource_unset(phba);
out_unset_pci_mem_s4:
lpfc_sli4_pci_mem_unset(phba);
out_disable_pci_dev:
lpfc_disable_pci_dev(phba);
if (shost)
scsi_host_put(shost);
out_free_phba:
lpfc_hba_free(phba);
return error;
}
/**
* lpfc_pci_remove_one_s4 - PCI func to unreg SLI-4 device from PCI subsystem
* @pdev: pointer to PCI device
*
* This routine is called from the kernel's PCI subsystem to device with
* SLI-4 interface spec. When an Emulex HBA with SLI-4 interface spec is
* removed from PCI bus, it performs all the necessary cleanup for the HBA
* device to be removed from the PCI subsystem properly.
**/
static void __devexit
lpfc_pci_remove_one_s4(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_vport **vports;
struct lpfc_hba *phba = vport->phba;
int i;
/* Mark the device unloading flag */
spin_lock_irq(&phba->hbalock);
vport->load_flag |= FC_UNLOADING;
spin_unlock_irq(&phba->hbalock);
/* Free the HBA sysfs attributes */
lpfc_free_sysfs_attr(vport);
/* Release all the vports against this physical port */
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
for (i = 1; i <= phba->max_vports && vports[i] != NULL; i++)
fc_vport_terminate(vports[i]->fc_vport);
lpfc_destroy_vport_work_array(phba, vports);
/* Remove FC host and then SCSI host with the physical port */
fc_remove_host(shost);
scsi_remove_host(shost);
/* Perform cleanup on the physical port */
lpfc_cleanup(vport);
/*
* Bring down the SLI Layer. This step disables all interrupts,
* clears the rings, discards all mailbox commands, and resets
* the HBA FCoE function.
*/
lpfc_debugfs_terminate(vport);
lpfc_sli4_hba_unset(phba);
spin_lock_irq(&phba->hbalock);
list_del_init(&vport->listentry);
spin_unlock_irq(&phba->hbalock);
/* Call scsi_free before lpfc_sli4_driver_resource_unset since scsi
* buffers are released to their corresponding pools here.
*/
lpfc_scsi_free(phba);
lpfc_sli4_driver_resource_unset(phba);
/* Unmap adapter Control and Doorbell registers */
lpfc_sli4_pci_mem_unset(phba);
/* Release PCI resources and disable device's PCI function */
scsi_host_put(shost);
lpfc_disable_pci_dev(phba);
/* Finally, free the driver's device data structure */
lpfc_hba_free(phba);
return;
}
/**
* lpfc_pci_suspend_one_s4 - PCI func to suspend SLI-4 device for power mgmnt
* @pdev: pointer to PCI device
* @msg: power management message
*
* This routine is called from the kernel's PCI subsystem to support system
* Power Management (PM) to device with SLI-4 interface spec. When PM invokes
* this method, it quiesces the device by stopping the driver's worker
* thread for the device, turning off device's interrupt and DMA, and bring
* the device offline. Note that as the driver implements the minimum PM
* requirements to a power-aware driver's PM support for suspend/resume -- all
* the possible PM messages (SUSPEND, HIBERNATE, FREEZE) to the suspend()
* method call will be treated as SUSPEND and the driver will fully
* reinitialize its device during resume() method call, the driver will set
* device to PCI_D3hot state in PCI config space instead of setting it
* according to the @msg provided by the PM.
*
* Return code
* 0 - driver suspended the device
* Error otherwise
**/
static int
lpfc_pci_suspend_one_s4(struct pci_dev *pdev, pm_message_t msg)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0298 PCI device Power Management suspend.\n");
/* Bring down the device */
lpfc_offline_prep(phba);
lpfc_offline(phba);
kthread_stop(phba->worker_thread);
/* Disable interrupt from device */
lpfc_sli4_disable_intr(phba);
/* Save device state to PCI config space */
pci_save_state(pdev);
pci_set_power_state(pdev, PCI_D3hot);
return 0;
}
/**
* lpfc_pci_resume_one_s4 - PCI func to resume SLI-4 device for power mgmnt
* @pdev: pointer to PCI device
*
* This routine is called from the kernel's PCI subsystem to support system
* Power Management (PM) to device with SLI-4 interface spac. When PM invokes
* this method, it restores the device's PCI config space state and fully
* reinitializes the device and brings it online. Note that as the driver
* implements the minimum PM requirements to a power-aware driver's PM for
* suspend/resume -- all the possible PM messages (SUSPEND, HIBERNATE, FREEZE)
* to the suspend() method call will be treated as SUSPEND and the driver
* will fully reinitialize its device during resume() method call, the device
* will be set to PCI_D0 directly in PCI config space before restoring the
* state.
*
* Return code
* 0 - driver suspended the device
* Error otherwise
**/
static int
lpfc_pci_resume_one_s4(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
uint32_t intr_mode;
int error;
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0292 PCI device Power Management resume.\n");
/* Restore device state from PCI config space */
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
if (pdev->is_busmaster)
pci_set_master(pdev);
/* Startup the kernel thread for this host adapter. */
phba->worker_thread = kthread_run(lpfc_do_work, phba,
"lpfc_worker_%d", phba->brd_no);
if (IS_ERR(phba->worker_thread)) {
error = PTR_ERR(phba->worker_thread);
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0293 PM resume failed to start worker "
"thread: error=x%x.\n", error);
return error;
}
/* Configure and enable interrupt */
intr_mode = lpfc_sli4_enable_intr(phba, phba->intr_mode);
if (intr_mode == LPFC_INTR_ERROR) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0294 PM resume Failed to enable interrupt\n");
return -EIO;
} else
phba->intr_mode = intr_mode;
/* Restart HBA and bring it online */
lpfc_sli_brdrestart(phba);
lpfc_online(phba);
/* Log the current active interrupt mode */
lpfc_log_intr_mode(phba, phba->intr_mode);
return 0;
}
/**
* lpfc_io_error_detected_s4 - Method for handling PCI I/O error to SLI-4 device
* @pdev: pointer to PCI device.
* @state: the current PCI connection state.
*
* This routine is called from the PCI subsystem for error handling to device
* with SLI-4 interface spec. This function is called by the PCI subsystem
* after a PCI bus error affecting this device has been detected. When this
* function is invoked, it will need to stop all the I/Os and interrupt(s)
* to the device. Once that is done, it will return PCI_ERS_RESULT_NEED_RESET
* for the PCI subsystem to perform proper recovery as desired.
*
* Return codes
* PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
* PCI_ERS_RESULT_DISCONNECT - device could not be recovered
**/
static pci_ers_result_t
lpfc_io_error_detected_s4(struct pci_dev *pdev, pci_channel_state_t state)
{
return PCI_ERS_RESULT_NEED_RESET;
}
/**
* lpfc_io_slot_reset_s4 - Method for restart PCI SLI-4 device from scratch
* @pdev: pointer to PCI device.
*
* This routine is called from the PCI subsystem for error handling to device
* with SLI-4 interface spec. It is called after PCI bus has been reset to
* restart the PCI card from scratch, as if from a cold-boot. During the
* PCI subsystem error recovery, after the driver returns
* PCI_ERS_RESULT_NEED_RESET, the PCI subsystem will perform proper error
* recovery and then call this routine before calling the .resume method to
* recover the device. This function will initialize the HBA device, enable
* the interrupt, but it will just put the HBA to offline state without
* passing any I/O traffic.
*
* Return codes
* PCI_ERS_RESULT_RECOVERED - the device has been recovered
* PCI_ERS_RESULT_DISCONNECT - device could not be recovered
*/
static pci_ers_result_t
lpfc_io_slot_reset_s4(struct pci_dev *pdev)
{
return PCI_ERS_RESULT_RECOVERED;
}
/**
* lpfc_io_resume_s4 - Method for resuming PCI I/O operation to SLI-4 device
* @pdev: pointer to PCI device
*
* This routine is called from the PCI subsystem for error handling to device
* with SLI-4 interface spec. It is called when kernel error recovery tells
* the lpfc driver that it is ok to resume normal PCI operation after PCI bus
* error recovery. After this call, traffic can start to flow from this device
* again.
**/
static void
lpfc_io_resume_s4(struct pci_dev *pdev)
{
return;
}
/**
* lpfc_pci_probe_one - lpfc PCI probe func to reg dev to PCI subsystem
* @pdev: pointer to PCI device
* @pid: pointer to PCI device identifier
*
* This routine is to be registered to the kernel's PCI subsystem. When an
* Emulex HBA device is presented on PCI bus, the kernel PCI subsystem looks
* at PCI device-specific information of the device and driver to see if the
* driver state that it can support this kind of device. If the match is
* successful, the driver core invokes this routine. This routine dispatches
* the action to the proper SLI-3 or SLI-4 device probing routine, which will
* do all the initialization that it needs to do to handle the HBA device
* properly.
*
* Return code
* 0 - driver can claim the device
* negative value - driver can not claim the device
**/
static int __devinit
lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
{
int rc;
struct lpfc_sli_intf intf;
if (pci_read_config_dword(pdev, LPFC_SLIREV_CONF_WORD, &intf.word0))
return -ENODEV;
if ((bf_get(lpfc_sli_intf_valid, &intf) == LPFC_SLI_INTF_VALID) &&
(bf_get(lpfc_sli_intf_rev, &intf) == LPFC_SLIREV_CONF_SLI4))
rc = lpfc_pci_probe_one_s4(pdev, pid);
else
rc = lpfc_pci_probe_one_s3(pdev, pid);
return rc;
}
/**
* lpfc_pci_remove_one - lpfc PCI func to unreg dev from PCI subsystem
* @pdev: pointer to PCI device
*
* This routine is to be registered to the kernel's PCI subsystem. When an
* Emulex HBA is removed from PCI bus, the driver core invokes this routine.
* This routine dispatches the action to the proper SLI-3 or SLI-4 device
* remove routine, which will perform all the necessary cleanup for the
* device to be removed from the PCI subsystem properly.
**/
static void __devexit
lpfc_pci_remove_one(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
switch (phba->pci_dev_grp) {
case LPFC_PCI_DEV_LP:
lpfc_pci_remove_one_s3(pdev);
break;
case LPFC_PCI_DEV_OC:
lpfc_pci_remove_one_s4(pdev);
break;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1424 Invalid PCI device group: 0x%x\n",
phba->pci_dev_grp);
break;
}
return;
}
/**
* lpfc_pci_suspend_one - lpfc PCI func to suspend dev for power management
* @pdev: pointer to PCI device
* @msg: power management message
*
* This routine is to be registered to the kernel's PCI subsystem to support
* system Power Management (PM). When PM invokes this method, it dispatches
* the action to the proper SLI-3 or SLI-4 device suspend routine, which will
* suspend the device.
*
* Return code
* 0 - driver suspended the device
* Error otherwise
**/
static int
lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
int rc = -ENODEV;
switch (phba->pci_dev_grp) {
case LPFC_PCI_DEV_LP:
rc = lpfc_pci_suspend_one_s3(pdev, msg);
break;
case LPFC_PCI_DEV_OC:
rc = lpfc_pci_suspend_one_s4(pdev, msg);
break;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1425 Invalid PCI device group: 0x%x\n",
phba->pci_dev_grp);
break;
}
return rc;
}
/**
* lpfc_pci_resume_one - lpfc PCI func to resume dev for power management
* @pdev: pointer to PCI device
*
* This routine is to be registered to the kernel's PCI subsystem to support
* system Power Management (PM). When PM invokes this method, it dispatches
* the action to the proper SLI-3 or SLI-4 device resume routine, which will
* resume the device.
*
* Return code
* 0 - driver suspended the device
* Error otherwise
**/
static int
lpfc_pci_resume_one(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
int rc = -ENODEV;
switch (phba->pci_dev_grp) {
case LPFC_PCI_DEV_LP:
rc = lpfc_pci_resume_one_s3(pdev);
break;
case LPFC_PCI_DEV_OC:
rc = lpfc_pci_resume_one_s4(pdev);
break;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1426 Invalid PCI device group: 0x%x\n",
phba->pci_dev_grp);
break;
}
return rc;
}
/**
* lpfc_io_error_detected - lpfc method for handling PCI I/O error
* @pdev: pointer to PCI device.
* @state: the current PCI connection state.
*
* This routine is registered to the PCI subsystem for error handling. This
* function is called by the PCI subsystem after a PCI bus error affecting
* this device has been detected. When this routine is invoked, it dispatches
* the action to the proper SLI-3 or SLI-4 device error detected handling
* routine, which will perform the proper error detected operation.
*
* Return codes
* PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
* PCI_ERS_RESULT_DISCONNECT - device could not be recovered
**/
static pci_ers_result_t
lpfc_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
pci_ers_result_t rc = PCI_ERS_RESULT_DISCONNECT;
switch (phba->pci_dev_grp) {
case LPFC_PCI_DEV_LP:
rc = lpfc_io_error_detected_s3(pdev, state);
break;
case LPFC_PCI_DEV_OC:
rc = lpfc_io_error_detected_s4(pdev, state);
break;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1427 Invalid PCI device group: 0x%x\n",
phba->pci_dev_grp);
break;
}
return rc;
}
/**
* lpfc_io_slot_reset - lpfc method for restart PCI dev from scratch
* @pdev: pointer to PCI device.
*
* This routine is registered to the PCI subsystem for error handling. This
* function is called after PCI bus has been reset to restart the PCI card
* from scratch, as if from a cold-boot. When this routine is invoked, it
* dispatches the action to the proper SLI-3 or SLI-4 device reset handling
* routine, which will perform the proper device reset.
*
* Return codes
* PCI_ERS_RESULT_RECOVERED - the device has been recovered
* PCI_ERS_RESULT_DISCONNECT - device could not be recovered
**/
static pci_ers_result_t
lpfc_io_slot_reset(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
pci_ers_result_t rc = PCI_ERS_RESULT_DISCONNECT;
switch (phba->pci_dev_grp) {
case LPFC_PCI_DEV_LP:
rc = lpfc_io_slot_reset_s3(pdev);
break;
case LPFC_PCI_DEV_OC:
rc = lpfc_io_slot_reset_s4(pdev);
break;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1428 Invalid PCI device group: 0x%x\n",
phba->pci_dev_grp);
break;
}
return rc;
}
/**
* lpfc_io_resume - lpfc method for resuming PCI I/O operation
* @pdev: pointer to PCI device
*
* This routine is registered to the PCI subsystem for error handling. It
* is called when kernel error recovery tells the lpfc driver that it is
* OK to resume normal PCI operation after PCI bus error recovery. When
* this routine is invoked, it dispatches the action to the proper SLI-3
* or SLI-4 device io_resume routine, which will resume the device operation.
**/
static void
lpfc_io_resume(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
switch (phba->pci_dev_grp) {
case LPFC_PCI_DEV_LP:
lpfc_io_resume_s3(pdev);
break;
case LPFC_PCI_DEV_OC:
lpfc_io_resume_s4(pdev);
break;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1429 Invalid PCI device group: 0x%x\n",
phba->pci_dev_grp);
break;
}
return;
}
static struct pci_device_id lpfc_id_table[] = {
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_VIPER,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_FIREFLY,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_THOR,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PEGASUS,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_CENTAUR,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_DRAGONFLY,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SUPERFLY,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_RFLY,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PFLY,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_NEPTUNE,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_NEPTUNE_SCSP,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_NEPTUNE_DCSP,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_HELIOS,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_HELIOS_SCSP,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_HELIOS_DCSP,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_BMID,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_BSMB,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZEPHYR,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_HORNET,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZEPHYR_SCSP,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZEPHYR_DCSP,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZMID,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZSMB,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_TFLY,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LP101,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LP10000S,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LP11000S,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LPE11000S,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SAT,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SAT_MID,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SAT_SMB,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SAT_DCSP,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SAT_SCSP,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SAT_S,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PROTEUS_VF,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PROTEUS_PF,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PROTEUS_S,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_SERVERENGINE, PCI_DEVICE_ID_TIGERSHARK,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_SERVERENGINE, PCI_DEVICE_ID_TS_BE3,
PCI_ANY_ID, PCI_ANY_ID, },
{ 0 }
};
MODULE_DEVICE_TABLE(pci, lpfc_id_table);
static struct pci_error_handlers lpfc_err_handler = {
.error_detected = lpfc_io_error_detected,
.slot_reset = lpfc_io_slot_reset,
.resume = lpfc_io_resume,
};
static struct pci_driver lpfc_driver = {
.name = LPFC_DRIVER_NAME,
.id_table = lpfc_id_table,
.probe = lpfc_pci_probe_one,
.remove = __devexit_p(lpfc_pci_remove_one),
.suspend = lpfc_pci_suspend_one,
.resume = lpfc_pci_resume_one,
.err_handler = &lpfc_err_handler,
};
/**
* lpfc_init - lpfc module initialization routine
*
* This routine is to be invoked when the lpfc module is loaded into the
* kernel. The special kernel macro module_init() is used to indicate the
* role of this routine to the kernel as lpfc module entry point.
*
* Return codes
* 0 - successful
* -ENOMEM - FC attach transport failed
* all others - failed
*/
static int __init
lpfc_init(void)
{
int error = 0;
printk(LPFC_MODULE_DESC "\n");
printk(LPFC_COPYRIGHT "\n");
if (lpfc_enable_npiv) {
lpfc_transport_functions.vport_create = lpfc_vport_create;
lpfc_transport_functions.vport_delete = lpfc_vport_delete;
}
lpfc_transport_template =
fc_attach_transport(&lpfc_transport_functions);
if (lpfc_transport_template == NULL)
return -ENOMEM;
if (lpfc_enable_npiv) {
lpfc_vport_transport_template =
fc_attach_transport(&lpfc_vport_transport_functions);
if (lpfc_vport_transport_template == NULL) {
fc_release_transport(lpfc_transport_template);
return -ENOMEM;
}
}
error = pci_register_driver(&lpfc_driver);
if (error) {
fc_release_transport(lpfc_transport_template);
if (lpfc_enable_npiv)
fc_release_transport(lpfc_vport_transport_template);
}
return error;
}
/**
* lpfc_exit - lpfc module removal routine
*
* This routine is invoked when the lpfc module is removed from the kernel.
* The special kernel macro module_exit() is used to indicate the role of
* this routine to the kernel as lpfc module exit point.
*/
static void __exit
lpfc_exit(void)
{
pci_unregister_driver(&lpfc_driver);
fc_release_transport(lpfc_transport_template);
if (lpfc_enable_npiv)
fc_release_transport(lpfc_vport_transport_template);
if (_dump_buf_data) {
printk(KERN_ERR "9062 BLKGRD: freeing %lu pages for "
"_dump_buf_data at 0x%p\n",
(1L << _dump_buf_data_order), _dump_buf_data);
free_pages((unsigned long)_dump_buf_data, _dump_buf_data_order);
}
if (_dump_buf_dif) {
printk(KERN_ERR "9049 BLKGRD: freeing %lu pages for "
"_dump_buf_dif at 0x%p\n",
(1L << _dump_buf_dif_order), _dump_buf_dif);
free_pages((unsigned long)_dump_buf_dif, _dump_buf_dif_order);
}
}
module_init(lpfc_init);
module_exit(lpfc_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION(LPFC_MODULE_DESC);
MODULE_AUTHOR("Emulex Corporation - tech.support@emulex.com");
MODULE_VERSION("0:" LPFC_DRIVER_VERSION);
