PCI: designware: Add MSI-related pcie_host_ops for v3.65 hardware

DesignWare v3.65 hardware implements MSI controller registers in
application space.  This requires updates to the DesignWare core to
support controllers based on this older hardware.

Add msi_irq_set()/clear() interfaces to allow Set/Clear MSI IRQ enable bit
in the application register.  Also, v3.65 hardware uses the MSI_IRQ
register in application register space to raise MSI IRQ to the RC from EP.
Current code uses the standard mechanism as per PCI spec.  So add
get_msi_data() to get the address of this register so common code can
work on both v3.65 and newer hardware.

[bhelgaas: changelog]
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Pratyush Anand <pratyush.anand@st.com>
Acked-by: Mohit Kumar <mohit.kumar@st.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
CC: Russell King <linux@arm.linux.org.uk>
CC: Grant Likely <grant.likely@linaro.org>
CC: Rob Herring <robh+dt@kernel.org>
CC: Richard Zhu <r65037@freescale.com>
CC: Kishon Vijay Abraham I <kishon@ti.com>
CC: Marek Vasut <marex@denx.de>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Pawel Moll <pawel.moll@arm.com>
CC: Mark Rutland <mark.rutland@arm.com>
CC: Ian Campbell <ijc+devicetree@hellion.org.uk>
CC: Kumar Gala <galak@codeaurora.org>
CC: Randy Dunlap <rdunlap@infradead.org>
CC: Grant Likely <grant.likely@linaro.org>

1 files changed, 36 insertions, 14 deletions

diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
index 0e9838aaf567..52bd3a143563 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -218,27 +218,47 @@ static int find_valid_pos0(struct pcie_port *pp, int msgvec, int pos, int *pos0)
 	return 0;
 }
 
+static void dw_pcie_msi_clear_irq(struct pcie_port *pp, int irq)
+{
+	unsigned int res, bit, val;
+
+	res = (irq / 32) * 12;
+	bit = irq % 32;
+	dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, &val);
+	val &= ~(1 << bit);
+	dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, val);
+}
+
 static void clear_irq_range(struct pcie_port *pp, unsigned int irq_base,
 			    unsigned int nvec, unsigned int pos)
 {
-	unsigned int i, res, bit, val;
+	unsigned int i;
 
 	for (i = 0; i < nvec; i++) {
 		irq_set_msi_desc_off(irq_base, i, NULL);
 		clear_bit(pos + i, pp->msi_irq_in_use);
 		/* Disable corresponding interrupt on MSI controller */
-		res = ((pos + i) / 32) * 12;
-		bit = (pos + i) % 32;
-		dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, &val);
-		val &= ~(1 << bit);
-		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, val);
+		if (pp->ops->msi_clear_irq)
+			pp->ops->msi_clear_irq(pp, pos + i);
+		else
+			dw_pcie_msi_clear_irq(pp, pos + i);
 	}
 }
 
+static void dw_pcie_msi_set_irq(struct pcie_port *pp, int irq)
+{
+	unsigned int res, bit, val;
+
+	res = (irq / 32) * 12;
+	bit = irq % 32;
+	dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, &val);
+	val |= 1 << bit;
+	dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, val);
+}
+
 static int assign_irq(int no_irqs, struct msi_desc *desc, int *pos)
 {
-	int res, bit, irq, pos0, pos1, i;
-	u32 val;
+	int irq, pos0, pos1, i;
 	struct pcie_port *pp = sys_to_pcie(desc->dev->bus->sysdata);
 
 	if (!pp) {
@@ -282,11 +302,10 @@ static int assign_irq(int no_irqs, struct msi_desc *desc, int *pos)
 		}
 		set_bit(pos0 + i, pp->msi_irq_in_use);
 		/*Enable corresponding interrupt in MSI interrupt controller */
-		res = ((pos0 + i) / 32) * 12;
-		bit = (pos0 + i) % 32;
-		dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, &val);
-		val |= 1 << bit;
-		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, val);
+		if (pp->ops->msi_set_irq)
+			pp->ops->msi_set_irq(pp, pos0 + i);
+		else
+			dw_pcie_msi_set_irq(pp, pos0 + i);
 	}
 
 	*pos = pos0;
@@ -354,7 +373,10 @@ static int dw_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
 	 */
 	desc->msi_attrib.multiple = msgvec;
 
-	msg.address_lo = virt_to_phys((void *)pp->msi_data);
+	if (pp->ops->get_msi_data)
+		msg.address_lo = pp->ops->get_msi_data(pp);
+	else
+		msg.address_lo = virt_to_phys((void *)pp->msi_data);
 	msg.address_hi = 0x0;
 	msg.data = pos;
 	write_msi_msg(irq, &msg);